218819f75f
fixed led flashing in programming mode being fucked
...
don't write code when sleep deprived you make stupid mistakes
2024-08-08 03:51:24 -07:00
3eb211fb54
finally fixed bug in i2c address scan check routine
...
was checking if set instead of negated. oops.
2024-08-08 03:35:03 -07:00
d32442da9a
non-white cursor no longer stays on in programming modes
2024-08-08 03:33:23 -07:00
3a48cd8f06
change button gpio init to be like other programs, as part of gpio_init()
2024-08-08 03:32:59 -07:00
340cdcad89
initialize memory for led programs at startup
2024-08-07 13:22:24 -07:00
4dc61abc40
minor cleanup, fixes to random mode
2024-08-07 09:37:13 -07:00
987fc7b39d
move bootloader utility
2024-08-05 22:46:44 -07:00
4e7985273b
RELEASE v0.0.1: parameter editor works, fixed bugs
2024-08-05 22:28:20 -07:00
64ac32160b
program 5 works with preview; program selection mode is working
2024-08-05 20:45:58 -07:00
184c466c3b
program 2 works in preview mode
2024-08-05 20:00:26 -07:00
196a2b8301
holding BTN1 at boot will now reset settings to default
...
note that they are not stored yet. must go through an edit loop, or change your cursor config, in order to commit the settings to EEPROM.
2024-08-05 20:00:12 -07:00
0191126555
wip: fix preview on programs 0 and 1
...
both now "preview" properly in the program editor, but the program is a mess for testing this. fix before release
2024-08-05 18:02:02 -07:00
00a428a425
eeprom config save / restore working
2024-08-05 15:43:13 -07:00
6785261d08
buttons operate properly now
...
what the buttons actually _do_ does not necessarily operate properly, except the cursor. that's been fixed
2024-08-05 13:04:54 -07:00
9d00b8daa1
clear LED values before initializing matrix
...
programs are rendered after LEDs are sent. this means the first update would be garbage. initialize the data so this is not the case.
also fix bug with current scaling register fill function (doesn't affect this program).
2024-08-04 19:41:11 -07:00
8cdc122363
README.md: minor changes
2024-08-04 06:52:01 -07:00
d8bf688001
bootloader now functions
...
several issues with the bootloader, from gpio config, UART baud, etc.
bootloader now does the following:
- enters bootloader mode upon holding BTN2 at power-up
- flashes LED4 rapidly to indicate in bootloader mode
- operates WCH ISP bootloader at 115200 baud on the UART pins on GAT header
2024-08-04 06:39:10 -07:00
5177b02ab0
i2c, IS31FL3729 cleanup
2024-08-03 11:40:10 -07:00
8fb1368e0a
minor performance fixups for program 4
2024-08-03 11:39:07 -07:00
5d722f41e8
cleanup is31fl3729 driver; LED updates only when needed now
2024-08-03 05:56:37 -07:00
5adce05f84
fix the phosphoric fade effect on program 4
2024-08-02 19:39:01 -07:00
6a2de9a6a6
fix incorrect cursor LED indices; fix rgb program 4
2024-08-02 19:27:45 -07:00
51239bffa7
fix rgb program 1, 2, and 3
2024-08-02 18:49:47 -07:00
d24d0b6d03
knob: fix up brightness direction, limits
...
the knob now adjusts in a human-relatable way for min to max brightness.
the min and max brightness levels are now scaled correctly for the knob.
2024-08-02 17:47:17 -07:00
185578ad8d
fix LEDs lighting, and fix up first RGB program
2024-08-02 17:33:40 -07:00
d42f20773b
fix ADC lockup while reading
2024-08-02 17:33:20 -07:00
70bf2c481f
fix i2c comms failures
2024-08-02 17:33:02 -07:00
f8ce60d511
add PCB schematic, light guide 3D model
2024-08-01 04:55:07 -07:00
48bf4a29d4
fix LEDs not going to full bright during editing
2024-08-01 04:46:00 -07:00
5d1cc3f518
reduce main interrupt tick rate
2024-08-01 04:45:31 -07:00
f4bc0ca1c5
REAMDE.md: minor update
2024-08-01 04:44:31 -07:00
9d8653b528
directory path move
2024-07-29 03:47:51 -07:00
8b3c45cebd
minor cleanup, add i2c single register read/write functions
2024-07-29 03:44:14 -07:00
20870dc3e3
i2c.c: added timeouts
...
added timeouts to all the polling functions in the i2c code. hopefully if something hangs this gets it going again.
timeouts are not added on the data transfer portion, only on the initial setup portion. need to test if this is good enough.
2024-07-28 16:49:17 -07:00
2268b5368d
Add README.md
2024-07-28 16:22:08 -07:00
65a034de67
improve i2c; add gpio init functions; some minor fixups and cleanup
...
i2c is totally fucking broken though and needs to be replaced before con.
2024-07-28 16:16:03 -07:00
7a11164f8d
31fl3729.c: fix shift wrong way
2024-07-28 15:30:20 -07:00
a675f6d19b
initial commit of "complete" codebase
...
everything is completely untested. I'm sure most of this shit doesn't work and will be fixed when and if I get hardware.
2024-07-28 15:28:03 -07:00
true
true