true
4e7985273b
RELEASE v0.0.1: parameter editor works, fixed bugs
2024-08-05 22:28:20 -07:00
true
64ac32160b
program 5 works with preview; program selection mode is working
2024-08-05 20:45:58 -07:00
true
184c466c3b
program 2 works in preview mode
2024-08-05 20:00:26 -07:00
true
196a2b8301
holding BTN1 at boot will now reset settings to default
...
note that they are not stored yet. must go through an edit loop, or change your cursor config, in order to commit the settings to EEPROM.
2024-08-05 20:00:12 -07:00
true
0191126555
wip: fix preview on programs 0 and 1
...
both now "preview" properly in the program editor, but the program is a mess for testing this. fix before release
2024-08-05 18:02:02 -07:00
true
00a428a425
eeprom config save / restore working
2024-08-05 15:43:13 -07:00
true
6785261d08
buttons operate properly now
...
what the buttons actually _do_ does not necessarily operate properly, except the cursor. that's been fixed
2024-08-05 13:04:54 -07:00
true
9d00b8daa1
clear LED values before initializing matrix
...
programs are rendered after LEDs are sent. this means the first update would be garbage. initialize the data so this is not the case.
also fix bug with current scaling register fill function (doesn't affect this program).
2024-08-04 19:41:11 -07:00
true
d8bf688001
bootloader now functions
...
several issues with the bootloader, from gpio config, UART baud, etc.
bootloader now does the following:
- enters bootloader mode upon holding BTN2 at power-up
- flashes LED4 rapidly to indicate in bootloader mode
- operates WCH ISP bootloader at 115200 baud on the UART pins on GAT header
2024-08-04 06:39:10 -07:00
true
5177b02ab0
i2c, IS31FL3729 cleanup
2024-08-03 11:40:10 -07:00
true
8fb1368e0a
minor performance fixups for program 4
2024-08-03 11:39:07 -07:00
true
5d722f41e8
cleanup is31fl3729 driver; LED updates only when needed now
2024-08-03 05:56:37 -07:00
true
5adce05f84
fix the phosphoric fade effect on program 4
2024-08-02 19:39:01 -07:00
true
6a2de9a6a6
fix incorrect cursor LED indices; fix rgb program 4
2024-08-02 19:27:45 -07:00
true
51239bffa7
fix rgb program 1, 2, and 3
2024-08-02 18:49:47 -07:00
true
d24d0b6d03
knob: fix up brightness direction, limits
...
the knob now adjusts in a human-relatable way for min to max brightness.
the min and max brightness levels are now scaled correctly for the knob.
2024-08-02 17:47:17 -07:00
true
185578ad8d
fix LEDs lighting, and fix up first RGB program
2024-08-02 17:33:40 -07:00
true
d42f20773b
fix ADC lockup while reading
2024-08-02 17:33:20 -07:00
true
70bf2c481f
fix i2c comms failures
2024-08-02 17:33:02 -07:00
true
48bf4a29d4
fix LEDs not going to full bright during editing
2024-08-01 04:46:00 -07:00
true
5d1cc3f518
reduce main interrupt tick rate
2024-08-01 04:45:31 -07:00
true
9d8653b528
directory path move
2024-07-29 03:47:51 -07:00
