diff --git a/nametag8_CH592/user/main.c b/nametag8_CH592/user/main.c
index d054ddb..5721902 100644
--- a/nametag8_CH592/user/main.c
+++ b/nametag8_CH592/user/main.c
@@ -4,21 +4,19 @@
  * main MCU firmware
  * 2024 true
  *
- * much of this code is copied from true's DC29 Whiskey Pirates badge,
- * which was in turn copied from the original GAT Nametag.
+ * Hastily designed and rushed to completion for Supercon 8 on Nov 1, 2024.
+ *
+ * The original GAT Nametag used an 8-bit 8051 core MCU.
+ * Original code was hastily ported to the WP DC29 minibadge.
+ * This code is again hastily ported, and is based on the DC29 minibadge codebase.
+ * this is why things are so convoluted.
  *
- * The GAT Nametag used an 8-bit 8051 core MCU.
- * DC29 minibadge used a RISC-V core, and code was hastily ported.
- * this is why things like the menu system are so convoluted;
  *
  * the main MCU is responsible for the following:
- * - rendering OLED UI
- * - rendering LED programs
- * - storing fonts
- * - communicating with I2C devices, including:
- *   - oled display, accelerometer
- *   - eeprom, sub MCU, RGBLED controller
- * - implementing USB interface
+ * - rendering OLED UI, LED programs
+ * - storing fonts in flash
+ * - communicating with I2C devices. includes oled, accelerometer, eeprom, sub MCU, RGBLED
+ * - implementing USB interface (once I get time)
  * - implementing BLE (maybe)
  *
  */
@@ -43,6 +41,7 @@
 #include "user_config.h"
 
 
+
 // global settings
 #define OLED_UPDATE_RATE        13      // framerate of OLED; { (256*(8/8)) / OLED_UPDATE_RATE }; 13 = 19FPS, 15 = 17FPS
 
@@ -57,7 +56,7 @@
                                                             // this was checked with a stopwatch and is close enough
                                                             // this value IS FRAMERATE DEPENDENT for some reason... figure it out later
 
-const uint8_t vers[] = "241026a";
+const uint8_t vers[] = "241026b";
 
 uint32_t cpu_use = 0;
 uint32_t cpu_max = 0;
@@ -91,10 +90,13 @@ void ch59x_xtal_conf()
 
 /*
  * the CPU will change clockspeed depending on what it is doing.
- * all timers are tied to system clock and cannot be derived from the crystal directly,
- * except for RTC which can use the LSI. RTC also has a neat feature where it can
- * trigger an interrupt when bits match a mask. at this time we're not using the RTC
- * for anything else so putting RTC should suffice for our main tick interrupt.
+ * all hardware timers are tied to system clock and cannot be derived from
+ * the crystal directly. so we can't rely on timers or systick for timing.
+ *
+ * this leaves the RTC as the only periodic interrupt source which uses LSI clk.
+ * RTC has the capability to trigger an interrupt when count bits match a mask.
+ * we're not using the RTC for anything else, so RTC interrupt should suffice
+ * for our main tick interrupt.
  */
 __HIGH_CODE
 void rtc_reset_trig()
@@ -125,6 +127,9 @@ void rtcisr_init()
     PFIC_EnableIRQ(RTC_IRQn);
 }
 
+/*
+ * used only for rough cpu usage calculation stuff
+ */
 void systick_init(void)
 {
     SysTick->CNT = 0;                                       // clear counter
diff --git a/nametag8_CH592/user/ui/menu_entry_1.c b/nametag8_CH592/user/ui/menu_entry_1.c
index 7d8fdb0..3752158 100644
--- a/nametag8_CH592/user/ui/menu_entry_1.c
+++ b/nametag8_CH592/user/ui/menu_entry_1.c
@@ -170,13 +170,13 @@ void menu_1_name_edit()
 	char txt[10];
 
 	ssd1306fb_set_cursor(10, 8);
-	ssd1306fb_draw_str(font_table[1].font, uconf.name, 0);
+	ssd1306fb_draw_str(font_DejaVu_Sans_Mono_Bold_11, uconf.name, 0);
 
 	ssd1306fb_draw_circle(oled.cursor_x + 4, oled.cursor_y + 7, (mtick & 0x04) ? 2 : 1);
 
 	// draw underline
 	if (edit_mode == EDIT_MODE_IDLE || (edit_mode == EDIT_MODE_EDIT && (mtick & 0x08))) {
-		x = font_table[1].font[FONT_WIDTH_POS];
+		x = font_DejaVu_Sans_Mono_Bold_11[FONT_WIDTH_POS];
 		w = x - 1;
 
 		x *= edit_pos;
@@ -316,10 +316,10 @@ MENU_0_FONT:
 		}
 	}
 
-	w = ssd1306fb_get_str_width(font_table[1].font, txt, strlen(txt), 1);
+	w = ssd1306fb_get_str_width(font_DejaVu_Sans_Mono_Bold_11, txt, strlen(txt), 1);
 	x = 68 - (w >> 1);
 	ssd1306fb_set_cursor(x, 18);
-	ssd1306fb_draw_str(font_table[1].font, txt, 1);
+	ssd1306fb_draw_str(font_DejaVu_Sans_Mono_Bold_11, txt, 1);
 
 	// draw box
 	ssd1306fb_draw_rect(x - 2, 18, x + w + 2, 31);
diff --git a/nametag8_CH592/user/ui/menu_entry_5.c b/nametag8_CH592/user/ui/menu_entry_5.c
index 5ae7225..063f3c0 100644
--- a/nametag8_CH592/user/ui/menu_entry_5.c
+++ b/nametag8_CH592/user/ui/menu_entry_5.c
@@ -91,17 +91,17 @@ void menu_5_disp(uint8_t idx)
 			break;
 		}
 		case LI_FACTORY_RESET: {
-		    // todo: implement manual button checking here
+		    // todo: implement manual button checking here after getting button orientation code working
 		    //       yes, this means reset speed depends on framerate lol
 		    if (factory_reset >= 32) {
 		        // do the factory reset
+		        uconf_defaults();
+		        // todo: reboot?
 		    }
 
 		    ssd1306fb_draw_str(font_table[0].font, "Hold Set to Factory Reset...", 0);
-		    //ssd1306fb_set_color(SSD1306_STATE_CLR_PIXEL);
-		    //ssd1306fb_draw_rect_fill(50, 18, 86, 31);
-		    //ssd1306fb_set_color(SSD1306_STATE_SET_PIXEL);
 		    txt[0] = 0;
+
 		    ssd1306fb_draw_rect(50, 18, 86, 31);
 		    for (w = 0; w < (factory_reset >> 1); w++) {
 		        ssd1306fb_draw_vline(50 + w, 18, 31);
diff --git a/nametag8_CH592/user/user_config.c b/nametag8_CH592/user/user_config.c
index c4bdd5f..a5204ae 100644
--- a/nametag8_CH592/user/user_config.c
+++ b/nametag8_CH592/user/user_config.c
@@ -44,7 +44,7 @@ void uconf_defaults()
     if (uconf_flash_offset == 0xf0) {
         uconf.iter          = 0;
     }
-    uconf.font_idx          = 4;
+    uconf.font_idx          = 5;
     uconf.char_spacing      = 2;
     uconf.y_offset          = 0;