From 078f382dcc583409d73734b6f0ff0990032b6a65 Mon Sep 17 00:00:00 2001 From: true Date: Wed, 16 Oct 2024 23:51:49 -0700 Subject: [PATCH] initial commit of in progress firmware nearly everything is "implemented" but how well it works, or if it works at all, is unknown. --- .gitignore | 1 + gat_stand_fw/core/core_riscv.c | 306 ++ gat_stand_fw/core/core_riscv.h | 589 +++ gat_stand_fw/debug/debug.c | 248 + gat_stand_fw/debug/debug.h | 58 + gat_stand_fw/gat_stand_fw.launch | 61 + gat_stand_fw/gat_stand_fw.wvproj | 3 + gat_stand_fw/ld/ch32v203x8.ld | 1 + gat_stand_fw/periph/inc/ch32v20x.h | 4879 +++++++++++++++++++ gat_stand_fw/periph/inc/ch32v20x_adc.h | 220 + gat_stand_fw/periph/inc/ch32v20x_bkp.h | 93 + gat_stand_fw/periph/inc/ch32v20x_can.h | 369 ++ gat_stand_fw/periph/inc/ch32v20x_crc.h | 33 + gat_stand_fw/periph/inc/ch32v20x_dbgmcu.h | 52 + gat_stand_fw/periph/inc/ch32v20x_dma.h | 184 + gat_stand_fw/periph/inc/ch32v20x_exti.h | 95 + gat_stand_fw/periph/inc/ch32v20x_flash.h | 149 + gat_stand_fw/periph/inc/ch32v20x_gpio.h | 190 + gat_stand_fw/periph/inc/ch32v20x_i2c.h | 429 ++ gat_stand_fw/periph/inc/ch32v20x_iwdg.h | 50 + gat_stand_fw/periph/inc/ch32v20x_misc.h | 72 + gat_stand_fw/periph/inc/ch32v20x_opa.h | 74 + gat_stand_fw/periph/inc/ch32v20x_pwr.h | 64 + gat_stand_fw/periph/inc/ch32v20x_rcc.h | 263 + gat_stand_fw/periph/inc/ch32v20x_rtc.h | 98 + gat_stand_fw/periph/inc/ch32v20x_spi.h | 220 + gat_stand_fw/periph/inc/ch32v20x_tim.h | 508 ++ gat_stand_fw/periph/inc/ch32v20x_usart.h | 185 + gat_stand_fw/periph/inc/ch32v20x_usb.h | 532 ++ gat_stand_fw/periph/inc/ch32v20x_wwdg.h | 41 + gat_stand_fw/periph/src/ch32v20x_adc.c | 1210 +++++ gat_stand_fw/periph/src/ch32v20x_bkp.c | 244 + gat_stand_fw/periph/src/ch32v20x_can.c | 1261 +++++ gat_stand_fw/periph/src/ch32v20x_crc.c | 99 + gat_stand_fw/periph/src/ch32v20x_dbgmcu.c | 127 + gat_stand_fw/periph/src/ch32v20x_dma.c | 432 ++ gat_stand_fw/periph/src/ch32v20x_exti.c | 182 + gat_stand_fw/periph/src/ch32v20x_flash.c | 1250 +++++ gat_stand_fw/periph/src/ch32v20x_gpio.c | 1027 ++++ gat_stand_fw/periph/src/ch32v20x_i2c.c | 1012 ++++ gat_stand_fw/periph/src/ch32v20x_iwdg.c | 123 + gat_stand_fw/periph/src/ch32v20x_misc.c | 81 + gat_stand_fw/periph/src/ch32v20x_opa.c | 86 + gat_stand_fw/periph/src/ch32v20x_pwr.c | 398 ++ gat_stand_fw/periph/src/ch32v20x_rcc.c | 1032 ++++ gat_stand_fw/periph/src/ch32v20x_rtc.c | 478 ++ gat_stand_fw/periph/src/ch32v20x_spi.c | 660 +++ gat_stand_fw/periph/src/ch32v20x_tim.c | 2353 +++++++++ gat_stand_fw/periph/src/ch32v20x_usart.c | 740 +++ gat_stand_fw/periph/src/ch32v20x_wwdg.c | 141 + gat_stand_fw/startup/startup_ch32v20x_D6.S | 254 + gat_stand_fw/startup/startup_ch32v20x_D8.S | 269 + gat_stand_fw/startup/startup_ch32v20x_D8W.S | 275 ++ gat_stand_fw/user/ch32v20x_conf.h | 42 + gat_stand_fw/user/ch32v20x_it.c | 45 + gat_stand_fw/user/ch32v20x_it.h | 20 + gat_stand_fw/user/main.c | 171 + gat_stand_fw/user/src/btn.c | 106 + gat_stand_fw/user/src/btn.h | 58 + gat_stand_fw/user/src/gat_gpio.c | 24 + gat_stand_fw/user/src/gat_gpio.h | 28 + gat_stand_fw/user/src/port_pwr.c | 103 + gat_stand_fw/user/src/port_pwr.h | 46 + gat_stand_fw/user/src/rgbled.c | 119 + gat_stand_fw/user/src/rgbled.h | 24 + gat_stand_fw/user/src/rtc.c | 160 + gat_stand_fw/user/src/rtc.h | 44 + gat_stand_fw/user/system_ch32v20x.c | 987 ++++ gat_stand_fw/user/system_ch32v20x.h | 32 + 69 files changed, 25810 insertions(+) create mode 100644 .gitignore create mode 100644 gat_stand_fw/core/core_riscv.c create mode 100644 gat_stand_fw/core/core_riscv.h create mode 100644 gat_stand_fw/debug/debug.c create mode 100644 gat_stand_fw/debug/debug.h create mode 100644 gat_stand_fw/gat_stand_fw.launch create mode 100644 gat_stand_fw/gat_stand_fw.wvproj create mode 100644 gat_stand_fw/ld/ch32v203x8.ld create mode 100644 gat_stand_fw/periph/inc/ch32v20x.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_adc.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_bkp.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_can.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_crc.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_dbgmcu.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_dma.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_exti.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_flash.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_gpio.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_i2c.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_iwdg.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_misc.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_opa.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_pwr.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_rcc.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_rtc.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_spi.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_tim.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_usart.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_usb.h create mode 100644 gat_stand_fw/periph/inc/ch32v20x_wwdg.h create mode 100644 gat_stand_fw/periph/src/ch32v20x_adc.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_bkp.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_can.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_crc.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_dbgmcu.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_dma.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_exti.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_flash.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_gpio.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_i2c.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_iwdg.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_misc.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_opa.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_pwr.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_rcc.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_rtc.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_spi.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_tim.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_usart.c create mode 100644 gat_stand_fw/periph/src/ch32v20x_wwdg.c create mode 100644 gat_stand_fw/startup/startup_ch32v20x_D6.S create mode 100644 gat_stand_fw/startup/startup_ch32v20x_D8.S create mode 100644 gat_stand_fw/startup/startup_ch32v20x_D8W.S create mode 100644 gat_stand_fw/user/ch32v20x_conf.h create mode 100644 gat_stand_fw/user/ch32v20x_it.c create mode 100644 gat_stand_fw/user/ch32v20x_it.h create mode 100644 gat_stand_fw/user/main.c create mode 100644 gat_stand_fw/user/src/btn.c create mode 100644 gat_stand_fw/user/src/btn.h create mode 100644 gat_stand_fw/user/src/gat_gpio.c create mode 100644 gat_stand_fw/user/src/gat_gpio.h create mode 100644 gat_stand_fw/user/src/port_pwr.c create mode 100644 gat_stand_fw/user/src/port_pwr.h create mode 100644 gat_stand_fw/user/src/rgbled.c create mode 100644 gat_stand_fw/user/src/rgbled.h create mode 100644 gat_stand_fw/user/src/rtc.c create mode 100644 gat_stand_fw/user/src/rtc.h create mode 100644 gat_stand_fw/user/system_ch32v20x.c create mode 100644 gat_stand_fw/user/system_ch32v20x.h diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..456bf15 --- /dev/null +++ b/.gitignore @@ -0,0 +1 @@ +/gat_stand_fw/build_dbg diff --git a/gat_stand_fw/core/core_riscv.c b/gat_stand_fw/core/core_riscv.c new file mode 100644 index 0000000..0ebf2a4 --- /dev/null +++ b/gat_stand_fw/core/core_riscv.c @@ -0,0 +1,306 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : core_riscv.c + * Author : WCH + * Version : V1.0.1 + * Date : 2023/11/11 + * Description : RISC-V V4 Core Peripheral Access Layer Source File for CH32V20x +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include + +/* define compiler specific symbols */ +#if defined ( __CC_ARM ) + #define __ASM __asm /* asm keyword for ARM Compiler */ + #define __INLINE __inline /* inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /* asm keyword for IAR Compiler */ + #define __INLINE inline /* inline keyword for IAR Compiler. Only avaiable in High optimization mode */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /* asm keyword for GNU Compiler */ + #define __INLINE inline /* inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /* asm keyword for TASKING Compiler */ + #define __INLINE inline /* inline keyword for TASKING Compiler */ + +#endif + + + +/********************************************************************* + * @fn __get_MSTATUS + * + * @brief Return the Machine Status Register + * + * @return mstatus value + */ +uint32_t __get_MSTATUS(void) +{ + uint32_t result; + + __ASM volatile ( "csrr %0," "mstatus" : "=r" (result) ); + return (result); +} + +/********************************************************************* + * @fn __set_MSTATUS + * + * @brief Set the Machine Status Register + * + * @param value - set mstatus value + * + * @return none + */ +void __set_MSTATUS(uint32_t value) +{ + __ASM volatile ("csrw mstatus, %0" : : "r" (value) ); +} + +/********************************************************************* + * @fn __get_MISA + * + * @brief Return the Machine ISA Register + * + * @return misa value + */ +uint32_t __get_MISA(void) +{ + uint32_t result; + + __ASM volatile ( "csrr %0," "misa" : "=r" (result) ); + return (result); +} + +/********************************************************************* + * @fn __set_MISA + * + * @brief Set the Machine ISA Register + * + * @param value - set misa value + * + * @return none + */ +void __set_MISA(uint32_t value) +{ + __ASM volatile ("csrw misa, %0" : : "r" (value) ); +} + +/********************************************************************* + * @fn __get_MTVEC + * + * @brief Return the Machine Trap-Vector Base-Address Register + * + * @return mtvec value + */ +uint32_t __get_MTVEC(void) +{ + uint32_t result; + + __ASM volatile ( "csrr %0," "mtvec" : "=r" (result) ); + return (result); +} + +/********************************************************************* + * @fn __set_MTVEC + * + * @brief Set the Machine Trap-Vector Base-Address Register + * + * @param value - set mtvec value + * + * @return none + */ +void __set_MTVEC(uint32_t value) +{ + __ASM volatile ("csrw mtvec, %0" : : "r" (value) ); +} + +/********************************************************************* + * @fn __get_MSCRATCH + * + * @brief Return the Machine Seratch Register + * + * @return mscratch value + */ +uint32_t __get_MSCRATCH(void) +{ + uint32_t result; + + __ASM volatile ( "csrr %0," "mscratch" : "=r" (result) ); + return (result); +} + +/********************************************************************* + * @fn __set_MSCRATCH + * + * @brief Set the Machine Seratch Register + * + * @param value - set mscratch value + * + * @return none + */ +void __set_MSCRATCH(uint32_t value) +{ + __ASM volatile ("csrw mscratch, %0" : : "r" (value) ); +} + +/********************************************************************* + * @fn __get_MEPC + * + * @brief Return the Machine Exception Program Register + * + * @return mepc value + */ +uint32_t __get_MEPC(void) +{ + uint32_t result; + + __ASM volatile ( "csrr %0," "mepc" : "=r" (result) ); + return (result); +} + +/********************************************************************* + * @fn __set_MEPC + * + * @brief Set the Machine Exception Program Register + * + * @return mepc value + */ +void __set_MEPC(uint32_t value) +{ + __ASM volatile ("csrw mepc, %0" : : "r" (value) ); +} + +/********************************************************************* + * @fn __get_MCAUSE + * + * @brief Return the Machine Cause Register + * + * @return mcause value + */ +uint32_t __get_MCAUSE(void) +{ + uint32_t result; + + __ASM volatile ( "csrr %0," "mcause" : "=r" (result) ); + return (result); +} + +/********************************************************************* + * @fn __set_MEPC + * + * @brief Set the Machine Cause Register + * + * @return mcause value + */ +void __set_MCAUSE(uint32_t value) +{ + __ASM volatile ("csrw mcause, %0" : : "r" (value) ); +} + +/********************************************************************* + * @fn __get_MTVAL + * + * @brief Return the Machine Trap Value Register + * + * @return mtval value + */ +uint32_t __get_MTVAL(void) +{ + uint32_t result; + + __ASM volatile ( "csrr %0," "mtval" : "=r" (result) ); + return (result); +} + +/********************************************************************* + * @fn __set_MTVAL + * + * @brief Set the Machine Trap Value Register + * + * @return mtval value + */ +void __set_MTVAL(uint32_t value) +{ + __ASM volatile ("csrw mtval, %0" : : "r" (value) ); +} + +/********************************************************************* + * @fn __get_MVENDORID + * + * @brief Return Vendor ID Register + * + * @return mvendorid value + */ +uint32_t __get_MVENDORID(void) +{ + uint32_t result; + + __ASM volatile ( "csrr %0," "mvendorid" : "=r" (result) ); + return (result); +} + +/********************************************************************* + * @fn __get_MARCHID + * + * @brief Return Machine Architecture ID Register + * + * @return marchid value + */ +uint32_t __get_MARCHID(void) +{ + uint32_t result; + + __ASM volatile ( "csrr %0," "marchid" : "=r" (result) ); + return (result); +} + +/********************************************************************* + * @fn __get_MIMPID + * + * @brief Return Machine Implementation ID Register + * + * @return mimpid value + */ +uint32_t __get_MIMPID(void) +{ + uint32_t result; + + __ASM volatile ( "csrr %0," "mimpid" : "=r" (result) ); + return (result); +} + +/********************************************************************* + * @fn __get_MHARTID + * + * @brief Return Hart ID Register + * + * @return mhartid value + */ +uint32_t __get_MHARTID(void) +{ + uint32_t result; + + __ASM volatile ( "csrr %0," "mhartid" : "=r" (result) ); + return (result); +} + +/********************************************************************* + * @fn __get_SP + * + * @brief Return SP Register + * + * @return SP value + */ +uint32_t __get_SP(void) +{ + uint32_t result; + + __ASM volatile ( "mv %0," "sp" : "=r"(result) : ); + return (result); +} + diff --git a/gat_stand_fw/core/core_riscv.h b/gat_stand_fw/core/core_riscv.h new file mode 100644 index 0000000..44ecddb --- /dev/null +++ b/gat_stand_fw/core/core_riscv.h @@ -0,0 +1,589 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : core_riscv.h + * Author : WCH + * Version : V1.0.1 + * Date : 2023/11/11 + * Description : RISC-V V4 Core Peripheral Access Layer Header File for CH32V20x +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CORE_RISCV_H__ +#define __CORE_RISCV_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* IO definitions */ +#ifdef __cplusplus + #define __I volatile /* defines 'read only' permissions */ +#else + #define __I volatile const /* defines 'read only' permissions */ +#endif +#define __O volatile /* defines 'write only' permissions */ +#define __IO volatile /* defines 'read / write' permissions */ + +/* Standard Peripheral Library old types (maintained for legacy purpose) */ +typedef __I uint64_t vuc64; /* Read Only */ +typedef __I uint32_t vuc32; /* Read Only */ +typedef __I uint16_t vuc16; /* Read Only */ +typedef __I uint8_t vuc8; /* Read Only */ + +typedef const uint64_t uc64; /* Read Only */ +typedef const uint32_t uc32; /* Read Only */ +typedef const uint16_t uc16; /* Read Only */ +typedef const uint8_t uc8; /* Read Only */ + +typedef __I int64_t vsc64; /* Read Only */ +typedef __I int32_t vsc32; /* Read Only */ +typedef __I int16_t vsc16; /* Read Only */ +typedef __I int8_t vsc8; /* Read Only */ + +typedef const int64_t sc64; /* Read Only */ +typedef const int32_t sc32; /* Read Only */ +typedef const int16_t sc16; /* Read Only */ +typedef const int8_t sc8; /* Read Only */ + +typedef __IO uint64_t vu64; +typedef __IO uint32_t vu32; +typedef __IO uint16_t vu16; +typedef __IO uint8_t vu8; + +typedef uint64_t u64; +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; + +typedef __IO int64_t vs64; +typedef __IO int32_t vs32; +typedef __IO int16_t vs16; +typedef __IO int8_t vs8; + +typedef int64_t s64; +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; + +typedef enum {NoREADY = 0, READY = !NoREADY} ErrorStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +#define RV_STATIC_INLINE static inline + +/* memory mapped structure for Program Fast Interrupt Controller (PFIC) */ +typedef struct{ + __I uint32_t ISR[8]; + __I uint32_t IPR[8]; + __IO uint32_t ITHRESDR; + __IO uint32_t RESERVED; + __IO uint32_t CFGR; + __I uint32_t GISR; + __IO uint8_t VTFIDR[4]; + uint8_t RESERVED0[12]; + __IO uint32_t VTFADDR[4]; + uint8_t RESERVED1[0x90]; + __O uint32_t IENR[8]; + uint8_t RESERVED2[0x60]; + __O uint32_t IRER[8]; + uint8_t RESERVED3[0x60]; + __O uint32_t IPSR[8]; + uint8_t RESERVED4[0x60]; + __O uint32_t IPRR[8]; + uint8_t RESERVED5[0x60]; + __IO uint32_t IACTR[8]; + uint8_t RESERVED6[0xE0]; + __IO uint8_t IPRIOR[256]; + uint8_t RESERVED7[0x810]; + __IO uint32_t SCTLR; +}PFIC_Type; + +/* memory mapped structure for SysTick */ +typedef struct +{ + __IO uint32_t CTLR; + __IO uint32_t SR; + __IO uint64_t CNT; + __IO uint64_t CMP; +}SysTick_Type; + + +#define PFIC ((PFIC_Type *) 0xE000E000 ) +#define NVIC PFIC +#define NVIC_KEY1 ((uint32_t)0xFA050000) +#define NVIC_KEY2 ((uint32_t)0xBCAF0000) +#define NVIC_KEY3 ((uint32_t)0xBEEF0000) + +#define SysTick ((SysTick_Type *) 0xE000F000) + + +/********************************************************************* + * @fn __enable_irq + * + * @brief Enable Global Interrupt + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __enable_irq() +{ + __asm volatile ("csrs 0x800, %0" : : "r" (0x88) ); +} + +/********************************************************************* + * @fn __disable_irq + * + * @brief Disable Global Interrupt + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __disable_irq() +{ + __asm volatile ("csrc 0x800, %0" : : "r" (0x88) ); +} + +/********************************************************************* + * @fn __NOP + * + * @brief nop + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __NOP() +{ + __asm volatile ("nop"); +} + +/********************************************************************* + * @fn NVIC_EnableIRQ + * + * @brief Enable Interrupt + * + * @param IRQn - Interrupt Numbers + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->IENR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + +/********************************************************************* + * @fn NVIC_DisableIRQ + * + * @brief Disable Interrupt + * + * @param IRQn - Interrupt Numbers + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->IRER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + +/********************************************************************* + * @fn NVIC_GetStatusIRQ + * + * @brief Get Interrupt Enable State + * + * @param IRQn - Interrupt Numbers + * + * @return 1 - Interrupt Pending Enable + * 0 - Interrupt Pending Disable + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t NVIC_GetStatusIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + +/********************************************************************* + * @fn NVIC_GetPendingIRQ + * + * @brief Get Interrupt Pending State + * + * @param IRQn - Interrupt Numbers + * + * @return 1 - Interrupt Pending Enable + * 0 - Interrupt Pending Disable + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->IPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + +/********************************************************************* + * @fn NVIC_SetPendingIRQ + * + * @brief Set Interrupt Pending + * + * @param IRQn - Interrupt Numbers + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->IPSR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + +/********************************************************************* + * @fn NVIC_ClearPendingIRQ + * + * @brief Clear Interrupt Pending + * + * @param IRQn - Interrupt Numbers + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->IPRR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + +/********************************************************************* + * @fn NVIC_GetActive + * + * @brief Get Interrupt Active State + * + * @param IRQn - Interrupt Numbers + * + * @return 1 - Interrupt Active + * 0 - Interrupt No Active + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IACTR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + +/********************************************************************* + * @fn NVIC_SetPriority + * + * @brief Set Interrupt Priority + * + * @param IRQn - Interrupt Numbers + * interrupt nesting enable(CSR-0x804 bit1 = 1) + * priority - bit[7] - Preemption Priority + * bit[6:5] - Sub priority + * bit[4:0] - Reserve + * interrupt nesting disable(CSR-0x804 bit1 = 0) + * priority - bit[7:5] - Sub priority + * bit[4:0] - Reserve + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint8_t priority) +{ + NVIC->IPRIOR[(uint32_t)(IRQn)] = priority; +} + +/********************************************************************* + * @fn __WFI + * + * @brief Wait for Interrupt + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __WFI(void) +{ + NVIC->SCTLR &= ~(1<<3); // wfi + asm volatile ("wfi"); +} + +/********************************************************************* + * @fn _SEV + * + * @brief Set Event + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void _SEV(void) +{ + NVIC->SCTLR |= (1<<5); +} + +/********************************************************************* + * @fn _WFE + * + * @brief Wait for Events + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void _WFE(void) +{ + uint32_t tmp= NVIC->SCTLR; + tmp &= ~(1<<5); + tmp |= (1<<3); + NVIC->SCTLR = tmp; + asm volatile ("wfi"); +} + +/********************************************************************* + * @fn __WFE + * + * @brief Wait for Events + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __WFE(void) +{ + _SEV(); + _WFE(); + _WFE(); + if(*(vu32*)(0x40023800) & (1<<6)) + { + NVIC->SCTLR |= (1<<5); + } +} + +/********************************************************************* + * @fn SetVTFIRQ + * + * @brief Set VTF Interrupt + * + * @param addr - VTF interrupt service function base address. + * IRQn - Interrupt Numbers + * num - VTF Interrupt Numbers + * NewState - DISABLE or ENABLE + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void SetVTFIRQ(uint32_t addr, IRQn_Type IRQn, uint8_t num, FunctionalState NewState) +{ + if(num > 3) return ; + + if (NewState != DISABLE) + { + NVIC->VTFIDR[num] = IRQn; + NVIC->VTFADDR[num] = ((addr&0xFFFFFFFE)|0x1); + } + else + { + NVIC->VTFIDR[num] = IRQn; + NVIC->VTFADDR[num] = ((addr&0xFFFFFFFE)&(~0x1)); + } +} + +/********************************************************************* + * @fn NVIC_SystemReset + * + * @brief Initiate a system reset request + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_SystemReset(void) +{ + NVIC->CFGR = NVIC_KEY3|(1<<7); +} + +/********************************************************************* + * @fn __AMOADD_W + * + * @brief Atomic Add with 32bit value + * Atomically ADD 32bit value with value in memory using amoadd.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be ADDed + * + * @return return memory value + add value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOADD_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amoadd.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOAND_W + * + * @brief Atomic And with 32bit value + * Atomically AND 32bit value with value in memory using amoand.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be ANDed + * + * @return return memory value & and value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOAND_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amoand.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOMAX_W + * + * @brief Atomic signed MAX with 32bit value + * Atomically signed max compare 32bit value with value in memory using amomax.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be compared + * + * @return the bigger value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOMAX_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amomax.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOMAXU_W + * + * @brief Atomic unsigned MAX with 32bit value + * Atomically unsigned max compare 32bit value with value in memory using amomaxu.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be compared + * + * @return return the bigger value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t __AMOMAXU_W(volatile uint32_t *addr, uint32_t value) +{ + uint32_t result; + + __asm volatile ("amomaxu.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOMIN_W + * + * @brief Atomic signed MIN with 32bit value + * Atomically signed min compare 32bit value with value in memory using amomin.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be compared + * + * @return the smaller value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOMIN_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amomin.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOMINU_W + * + * @brief Atomic unsigned MIN with 32bit value + * Atomically unsigned min compare 32bit value with value in memory using amominu.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be compared + * + * @return the smaller value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t __AMOMINU_W(volatile uint32_t *addr, uint32_t value) +{ + uint32_t result; + + __asm volatile ("amominu.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOOR_W + * + * @brief Atomic OR with 32bit value + * Atomically OR 32bit value with value in memory using amoor.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be ORed + * + * @return return memory value | and value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOOR_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amoor.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOSWAP_W + * + * @brief Atomically swap new 32bit value into memory using amoswap.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * newval - New value to be stored into the address + * + * @return return the original value in memory + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t __AMOSWAP_W(volatile uint32_t *addr, uint32_t newval) +{ + uint32_t result; + + __asm volatile ("amoswap.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(newval) : "memory"); + return result; +} + +/********************************************************************* + * @fn __AMOXOR_W + * + * @brief Atomic XOR with 32bit value + * Atomically XOR 32bit value with value in memory using amoxor.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be XORed + * + * @return return memory value ^ and value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOXOR_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amoxor.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/* Core_Exported_Functions */ +extern uint32_t __get_MSTATUS(void); +extern void __set_MSTATUS(uint32_t value); +extern uint32_t __get_MISA(void); +extern void __set_MISA(uint32_t value); +extern uint32_t __get_MTVEC(void); +extern void __set_MTVEC(uint32_t value); +extern uint32_t __get_MSCRATCH(void); +extern void __set_MSCRATCH(uint32_t value); +extern uint32_t __get_MEPC(void); +extern void __set_MEPC(uint32_t value); +extern uint32_t __get_MCAUSE(void); +extern void __set_MCAUSE(uint32_t value); +extern uint32_t __get_MTVAL(void); +extern void __set_MTVAL(uint32_t value); +extern uint32_t __get_MVENDORID(void); +extern uint32_t __get_MARCHID(void); +extern uint32_t __get_MIMPID(void); +extern uint32_t __get_MHARTID(void); +extern uint32_t __get_SP(void); + +#ifdef __cplusplus +} +#endif + +#endif + + + + + diff --git a/gat_stand_fw/debug/debug.c b/gat_stand_fw/debug/debug.c new file mode 100644 index 0000000..311b8d4 --- /dev/null +++ b/gat_stand_fw/debug/debug.c @@ -0,0 +1,248 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : debug.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for UART + * Printf , Delay functions. + ********************************************************************************* + * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. + * Attention: This software (modified or not) and binary are used for + * microcontroller manufactured by Nanjing Qinheng Microelectronics. + *******************************************************************************/ +#include "debug.h" + +static uint8_t p_us = 0; +static uint16_t p_ms = 0; + +#define DEBUG_DATA0_ADDRESS ((volatile uint32_t*)0xE0000380) +#define DEBUG_DATA1_ADDRESS ((volatile uint32_t*)0xE0000384) + +/********************************************************************* + * @fn Delay_Init + * + * @brief Initializes Delay Funcation. + * + * @return none + */ +void Delay_Init(void) +{ + p_us = SystemCoreClock / 8000000; + p_ms = (uint16_t)p_us * 1000; +} + +/********************************************************************* + * @fn Delay_Us + * + * @brief Microsecond Delay Time. + * + * @param n - Microsecond number. + * + * @return None + */ +void Delay_Us(uint32_t n) +{ + uint32_t i; + + SysTick->SR &= ~(1 << 0); + i = (uint32_t)n * p_us; + + SysTick->CMP = i; + SysTick->CTLR |= (1 << 4); + SysTick->CTLR |= (1 << 5) | (1 << 0); + + while((SysTick->SR & (1 << 0)) != (1 << 0)); + SysTick->CTLR &= ~(1 << 0); +} + +/********************************************************************* + * @fn Delay_Ms + * + * @brief Millisecond Delay Time. + * + * @param n - Millisecond number. + * + * @return None + */ +void Delay_Ms(uint32_t n) +{ + uint32_t i; + + SysTick->SR &= ~(1 << 0); + i = (uint32_t)n * p_ms; + + SysTick->CMP = i; + SysTick->CTLR |= (1 << 4); + SysTick->CTLR |= (1 << 5) | (1 << 0); + + while((SysTick->SR & (1 << 0)) != (1 << 0)); + SysTick->CTLR &= ~(1 << 0); +} + +/********************************************************************* + * @fn USART_Printf_Init + * + * @brief Initializes the USARTx peripheral. + * + * @param baudrate - USART communication baud rate. + * + * @return None + */ +void USART_Printf_Init(uint32_t baudrate) +{ + GPIO_InitTypeDef GPIO_InitStructure; + USART_InitTypeDef USART_InitStructure; + +#if(DEBUG == DEBUG_UART1) + RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE); + + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_Init(GPIOA, &GPIO_InitStructure); + +#elif(DEBUG == DEBUG_UART2) + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE); + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); + + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_Init(GPIOA, &GPIO_InitStructure); + +#elif(DEBUG == DEBUG_UART3) + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE); + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); + + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_Init(GPIOB, &GPIO_InitStructure); + +#endif + + USART_InitStructure.USART_BaudRate = baudrate; + USART_InitStructure.USART_WordLength = USART_WordLength_8b; + USART_InitStructure.USART_StopBits = USART_StopBits_1; + USART_InitStructure.USART_Parity = USART_Parity_No; + USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_InitStructure.USART_Mode = USART_Mode_Tx; + +#if(DEBUG == DEBUG_UART1) + USART_Init(USART1, &USART_InitStructure); + USART_Cmd(USART1, ENABLE); + +#elif(DEBUG == DEBUG_UART2) + USART_Init(USART2, &USART_InitStructure); + USART_Cmd(USART2, ENABLE); + +#elif(DEBUG == DEBUG_UART3) + USART_Init(USART3, &USART_InitStructure); + USART_Cmd(USART3, ENABLE); + +#endif +} + +/********************************************************************* + * @fn SDI_Printf_Enable + * + * @brief Initializes the SDI printf Function. + * + * @param None + * + * @return None + */ +void SDI_Printf_Enable(void) +{ + *(DEBUG_DATA0_ADDRESS) = 0; + Delay_Init(); + Delay_Ms(1); +} + +/********************************************************************* + * @fn _write + * + * @brief Support Printf Function + * + * @param *buf - UART send Data. + * size - Data length + * + * @return size: Data length + */ +__attribute__((used)) +int _write(int fd, char *buf, int size) +{ + int i = 0; + +#if (SDI_PRINT == SDI_PR_OPEN) + int writeSize = size; + + do + { + + /** + * data0 data1 8 byte + * data0 The storage length of the lowest byte, with a maximum of 7 bytes. + */ + + while( (*(DEBUG_DATA0_ADDRESS) != 0u)) + { + + } + + if(writeSize>7) + { + *(DEBUG_DATA1_ADDRESS) = (*(buf+i+3)) | (*(buf+i+4)<<8) | (*(buf+i+5)<<16) | (*(buf+i+6)<<24); + *(DEBUG_DATA0_ADDRESS) = (7u) | (*(buf+i)<<8) | (*(buf+i+1)<<16) | (*(buf+i+2)<<24); + + i += 7; + writeSize -= 7; + } + else + { + *(DEBUG_DATA1_ADDRESS) = (*(buf+i+3)) | (*(buf+i+4)<<8) | (*(buf+i+5)<<16) | (*(buf+i+6)<<24); + *(DEBUG_DATA0_ADDRESS) = (writeSize) | (*(buf+i)<<8) | (*(buf+i+1)<<16) | (*(buf+i+2)<<24); + + writeSize = 0; + } + + } while (writeSize); + + +#else + for(i = 0; i < size; i++){ +#if(DEBUG == DEBUG_UART1) + while(USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET); + USART_SendData(USART1, *buf++); +#elif(DEBUG == DEBUG_UART2) + while(USART_GetFlagStatus(USART2, USART_FLAG_TC) == RESET); + USART_SendData(USART2, *buf++); +#elif(DEBUG == DEBUG_UART3) + while(USART_GetFlagStatus(USART3, USART_FLAG_TC) == RESET); + USART_SendData(USART3, *buf++); +#endif + } +#endif + return size; +} + +/********************************************************************* + * @fn _sbrk + * + * @brief Change the spatial position of data segment. + * + * @return size: Data length + */ +__attribute__((used)) +void *_sbrk(ptrdiff_t incr) +{ + extern char _end[]; + extern char _heap_end[]; + static char *curbrk = _end; + + if ((curbrk + incr < _end) || (curbrk + incr > _heap_end)) + return NULL - 1; + + curbrk += incr; + return curbrk - incr; +} diff --git a/gat_stand_fw/debug/debug.h b/gat_stand_fw/debug/debug.h new file mode 100644 index 0000000..fd60cd0 --- /dev/null +++ b/gat_stand_fw/debug/debug.h @@ -0,0 +1,58 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : debug.h + * Author : WCH + * Version : V1.0.0 + * Date : 2023/10/24 + * Description : This file contains all the functions prototypes for UART + * Printf , Delay functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __DEBUG_H +#define __DEBUG_H + +#include "stdio.h" +#include "ch32v20x.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* UART Printf Definition */ +#define DEBUG_UART1 1 +#define DEBUG_UART2 2 +#define DEBUG_UART3 3 + +/* DEBUG UATR Definition */ +#ifndef DEBUG +#define DEBUG DEBUG_UART1 +#endif + +/* SDI Printf Definition */ +#define SDI_PR_CLOSE 0 +#define SDI_PR_OPEN 1 + +#ifndef SDI_PRINT +#define SDI_PRINT SDI_PR_CLOSE +#endif + + +void Delay_Init(void); +void Delay_Us(uint32_t n); +void Delay_Ms(uint32_t n); +void USART_Printf_Init(uint32_t baudrate); +void SDI_Printf_Enable(void); + +#if(DEBUG) + #define PRINT(format, ...) printf(format, ##__VA_ARGS__) +#else + #define PRINT(X...) +#endif + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/gat_stand_fw.launch b/gat_stand_fw/gat_stand_fw.launch new file mode 100644 index 0000000..08a05ce --- /dev/null +++ b/gat_stand_fw/gat_stand_fw.launch @@ -0,0 +1,61 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/gat_stand_fw/gat_stand_fw.wvproj b/gat_stand_fw/gat_stand_fw.wvproj new file mode 100644 index 0000000..be19b33 --- /dev/null +++ b/gat_stand_fw/gat_stand_fw.wvproj @@ -0,0 +1,3 @@ +Qd_i*;ƫ}`Ia@0 `-d NO;pgjz +>i72tMkWF[!OH ~,d"?-=I0:IŶEMÇzIT'Vk*Sj <.HOV\FSqy?65C1"EYnVF}iP9."YY<BM3 X/W{dibTAnV +M \ No newline at end of file diff --git a/gat_stand_fw/ld/ch32v203x8.ld b/gat_stand_fw/ld/ch32v203x8.ld new file mode 100644 index 0000000..1d9a9a1 --- /dev/null +++ b/gat_stand_fw/ld/ch32v203x8.ld @@ -0,0 +1 @@ +ENTRY( _start ) __stack_size = 1024; PROVIDE( _stack_size = __stack_size ); MEMORY { /* CH32V20x_D6 - CH32V203F6-CH32V203G6-CH32V203K6-CH32V203C6 */ /* FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 32K RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 10K */ /* CH32V20x_D6 - CH32V203K8-CH32V203C8-CH32V203G8-CH32V203F8 */ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 64K RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K /* CH32V20x_D8 - CH32V203RB CH32V20x_D8W - CH32V208x FLASH + RAM supports the following configuration FLASH-128K + RAM-64K FLASH-144K + RAM-48K FLASH-160K + RAM-32K */ /* FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 160K RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 32K */ } SECTIONS { .init : { _sinit = .; . = ALIGN(4); KEEP(*(SORT_NONE(.init))) . = ALIGN(4); _einit = .; } >FLASH AT>FLASH .vector : { *(.vector); . = ALIGN(64); } >FLASH AT>FLASH .text : { . = ALIGN(4); *(.text) *(.text.*) *(.rodata) *(.rodata*) *(.gnu.linkonce.t.*) . = ALIGN(4); } >FLASH AT>FLASH .fini : { KEEP(*(SORT_NONE(.fini))) . = ALIGN(4); } >FLASH AT>FLASH PROVIDE( _etext = . ); PROVIDE( _eitcm = . ); .preinit_array : { PROVIDE_HIDDEN (__preinit_array_start = .); KEEP (*(.preinit_array)) PROVIDE_HIDDEN (__preinit_array_end = .); } >FLASH AT>FLASH .init_array : { PROVIDE_HIDDEN (__init_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) PROVIDE_HIDDEN (__init_array_end = .); } >FLASH AT>FLASH .fini_array : { PROVIDE_HIDDEN (__fini_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) PROVIDE_HIDDEN (__fini_array_end = .); } >FLASH AT>FLASH .ctors : { /* gcc uses crtbegin.o to find the start of the constructors, so we make sure it is first. Because this is a wildcard, it doesn't matter if the user does not actually link against crtbegin.o; the linker won't look for a file to match a wildcard. The wildcard also means that it doesn't matter which directory crtbegin.o is in. */ KEEP (*crtbegin.o(.ctors)) KEEP (*crtbegin?.o(.ctors)) /* We don't want to include the .ctor section from the crtend.o file until after the sorted ctors. The .ctor section from the crtend file contains the end of ctors marker and it must be last */ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors)) } >FLASH AT>FLASH .dtors : { KEEP (*crtbegin.o(.dtors)) KEEP (*crtbegin?.o(.dtors)) KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors)) } >FLASH AT>FLASH .dalign : { . = ALIGN(4); PROVIDE(_data_vma = .); } >RAM AT>FLASH .dlalign : { . = ALIGN(4); PROVIDE(_data_lma = .); } >FLASH AT>FLASH .data : { *(.gnu.linkonce.r.*) *(.data .data.*) *(.gnu.linkonce.d.*) . = ALIGN(8); PROVIDE( __global_pointer$ = . + 0x800 ); *(.sdata .sdata.*) *(.sdata2.*) *(.gnu.linkonce.s.*) . = ALIGN(8); *(.srodata.cst16) *(.srodata.cst8) *(.srodata.cst4) *(.srodata.cst2) *(.srodata .srodata.*) . = ALIGN(4); PROVIDE( _edata = .); } >RAM AT>FLASH .bss : { . = ALIGN(4); PROVIDE( _sbss = .); *(.sbss*) *(.gnu.linkonce.sb.*) *(.bss*) *(.gnu.linkonce.b.*) *(COMMON*) . = ALIGN(4); PROVIDE( _ebss = .); } >RAM AT>FLASH PROVIDE( _end = _ebss); PROVIDE( end = . ); .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size : { PROVIDE( _heap_end = . ); . = ALIGN(4); PROVIDE(_susrstack = . ); . = . + __stack_size; PROVIDE( _eusrstack = .); } >RAM } \ No newline at end of file diff --git a/gat_stand_fw/periph/inc/ch32v20x.h b/gat_stand_fw/periph/inc/ch32v20x.h new file mode 100644 index 0000000..fc5c540 --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x.h @@ -0,0 +1,4879 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x.h + * Author : WCH + * Version : V1.0.0 + * Date : 2024/01/31 + * Description : CH32V20x Device Peripheral Access Layer Header File. + ********************************************************************************* + * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. + * Attention: This software (modified or not) and binary are used for + * microcontroller manufactured by Nanjing Qinheng Microelectronics. + *******************************************************************************/ +#ifndef __CH32V20x_H +#define __CH32V20x_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(CH32V20x_D8W) && !defined(CH32V20x_D8) && !defined(CH32V20x_D6) +#define CH32V20x_D6 /* CH32V203F6-CH32V203F8-CH32V203G6-CH32V203G8-CH32V203K6-CH32V203K8-CH32V203C6-CH32V203C8-CH32V203G8*/ +//#define CH32V20x_D8 /* CH32V203RBT6 */ +//#define CH32V20x_D8W /* CH32V208 */ + +#endif + +#define __MPU_PRESENT 0 /* Other CH32 devices does not provide an MPU */ +#define __Vendor_SysTickConfig 0 /* Set to 1 if different SysTick Config is used */ + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) + #define HSE_VALUE ((uint32_t)32000000) /* Value of the External oscillator in Hz */ +#else + #define HSE_VALUE ((uint32_t)8000000) /* Value of the External oscillator in Hz */ +#endif + +/* In the following line adjust the External High Speed oscillator (HSE) Startup Timeout value */ +#define HSE_STARTUP_TIMEOUT ((uint16_t)0x1000) /* Time out for HSE start up */ + +#define HSI_VALUE ((uint32_t)8000000) /* Value of the Internal oscillator in Hz */ + +/* CH32V20x Standard Peripheral Library version number */ +#define __CH32V20x_STDPERIPH_VERSION_MAIN (0x02) /* [15:8] main version */ +#define __CH32V20x_STDPERIPH_VERSION_SUB (0x01) /* [7:0] sub version */ +#define __CH32V20x_STDPERIPH_VERSION ( (__CH32V20x_STDPERIPH_VERSION_MAIN << 8)\ + |(__CH32V20x_STDPERIPH_VERSION_SUB << 0)) + + +/* Interrupt Number Definition, according to the selected device */ +typedef enum IRQn +{ + /****** RISC-V Processor Exceptions Numbers *******************************************************/ + NonMaskableInt_IRQn = 2, /* 2 Non Maskable Interrupt */ + EXC_IRQn = 3, /* 3 Exception Interrupt */ + Ecall_M_Mode_IRQn = 5, /* 5 Ecall M Mode Interrupt */ + Ecall_U_Mode_IRQn = 8, /* 8 Ecall U Mode Interrupt */ + Break_Point_IRQn = 9, /* 9 Break Point Interrupt */ + SysTicK_IRQn = 12, /* 12 System timer Interrupt */ + Software_IRQn = 14, /* 14 software Interrupt */ + + /****** RISC-V specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 16, /* Window WatchDog Interrupt */ + PVD_IRQn = 17, /* PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 18, /* Tamper Interrupt */ + RTC_IRQn = 19, /* RTC global Interrupt */ + FLASH_IRQn = 20, /* FLASH global Interrupt */ + RCC_IRQn = 21, /* RCC global Interrupt */ + EXTI0_IRQn = 22, /* EXTI Line0 Interrupt */ + EXTI1_IRQn = 23, /* EXTI Line1 Interrupt */ + EXTI2_IRQn = 24, /* EXTI Line2 Interrupt */ + EXTI3_IRQn = 25, /* EXTI Line3 Interrupt */ + EXTI4_IRQn = 26, /* EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 27, /* DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 28, /* DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 29, /* DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 30, /* DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 31, /* DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 32, /* DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 33, /* DMA1 Channel 7 global Interrupt */ + ADC_IRQn = 34, /* ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 35, /* USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 36, /* USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 37, /* CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 38, /* CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 39, /* External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 40, /* TIM1 Break Interrupt */ + TIM1_UP_IRQn = 41, /* TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 42, /* TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 43, /* TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 44, /* TIM2 global Interrupt */ + TIM3_IRQn = 45, /* TIM3 global Interrupt */ + TIM4_IRQn = 46, /* TIM4 global Interrupt */ + I2C1_EV_IRQn = 47, /* I2C1 Event Interrupt */ + I2C1_ER_IRQn = 48, /* I2C1 Error Interrupt */ + I2C2_EV_IRQn = 49, /* I2C2 Event Interrupt */ + I2C2_ER_IRQn = 50, /* I2C2 Error Interrupt */ + SPI1_IRQn = 51, /* SPI1 global Interrupt */ + SPI2_IRQn = 52, /* SPI2 global Interrupt */ + USART1_IRQn = 53, /* USART1 global Interrupt */ + USART2_IRQn = 54, /* USART2 global Interrupt */ + USART3_IRQn = 55, /* USART3 global Interrupt */ + EXTI15_10_IRQn = 56, /* External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 57, /* RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 58, /* USB Device WakeUp from suspend through EXTI Line Interrupt */ + USBFS_IRQn = 59, /* USBFS global Interrupt */ + USBFSWakeUp_IRQn = 60, /* USB Host/Device WakeUp Interrupt */ + +#ifdef CH32V20x_D6 + UART4_IRQn = 61, /* UART4 global Interrupt */ + DMA1_Channel8_IRQn = 62, /* DMA1 Channel 8 global Interrupt */ + +#elif defined(CH32V20x_D8) + ETH_IRQn = 61, /* ETH global Interrupt */ + ETHWakeUp_IRQn = 62, /* ETH WakeUp Interrupt */ + TIM5_IRQn = 65, /* TIM5 global Interrupt */ + UART4_IRQn = 66, /* UART4 global Interrupt */ + DMA1_Channel8_IRQn = 67, /* DMA1 Channel 8 global Interrupt */ + OSC32KCal_IRQn = 68, /* OSC32K global Interrupt */ + OSCWakeUp_IRQn = 69, /* OSC32K WakeUp Interrupt */ + +#elif defined(CH32V20x_D8W) + ETH_IRQn = 61, /* ETH global Interrupt */ + ETHWakeUp_IRQn = 62, /* ETH WakeUp Interrupt */ + BB_IRQn = 63, /* BLE BB global Interrupt */ + LLE_IRQn = 64, /* BLE LLE global Interrupt */ + TIM5_IRQn = 65, /* TIM5 global Interrupt */ + UART4_IRQn = 66, /* UART4 global Interrupt */ + DMA1_Channel8_IRQn = 67, /* DMA1 Channel 8 global Interrupt */ + OSC32KCal_IRQn = 68, /* OSC32K global Interrupt */ + OSCWakeUp_IRQn = 69, /* OSC32K WakeUp Interrupt */ +#endif + +} IRQn_Type; + +#define HardFault_IRQn EXC_IRQn +#define ADC1_2_IRQn ADC_IRQn + +#define USBHD_IRQn USBFS_IRQn +#define USBHDWakeUp_IRQn USBFSWakeUp_IRQn + +#define USBHD_IRQHandler USBFS_IRQHandler +#define USBHDWakeUp_IRQHandler USBFSWakeUp_IRQHandler + +#define USBOTG_FS USBFSD +#define USBOTG_H_FS USBFSH + + +#include +#include "core_riscv.h" +#include "system_ch32v20x.h" + +/* Standard Peripheral Library old definitions (maintained for legacy purpose) */ +#define HSI_Value HSI_VALUE +#define HSE_Value HSE_VALUE +#define HSEStartUp_TimeOut HSE_STARTUP_TIMEOUT + +/* Analog to Digital Converter */ +typedef struct +{ + __IO uint32_t STATR; + __IO uint32_t CTLR1; + __IO uint32_t CTLR2; + __IO uint32_t SAMPTR1; + __IO uint32_t SAMPTR2; + __IO uint32_t IOFR1; + __IO uint32_t IOFR2; + __IO uint32_t IOFR3; + __IO uint32_t IOFR4; + __IO uint32_t WDHTR; + __IO uint32_t WDLTR; + __IO uint32_t RSQR1; + __IO uint32_t RSQR2; + __IO uint32_t RSQR3; + __IO uint32_t ISQR; + __IO uint32_t IDATAR1; + __IO uint32_t IDATAR2; + __IO uint32_t IDATAR3; + __IO uint32_t IDATAR4; + __IO uint32_t RDATAR; +} ADC_TypeDef; + +/* Backup Registers */ +typedef struct +{ + uint32_t RESERVED0; + __IO uint16_t DATAR1; + uint16_t RESERVED1; + __IO uint16_t DATAR2; + uint16_t RESERVED2; + __IO uint16_t DATAR3; + uint16_t RESERVED3; + __IO uint16_t DATAR4; + uint16_t RESERVED4; + __IO uint16_t DATAR5; + uint16_t RESERVED5; + __IO uint16_t DATAR6; + uint16_t RESERVED6; + __IO uint16_t DATAR7; + uint16_t RESERVED7; + __IO uint16_t DATAR8; + uint16_t RESERVED8; + __IO uint16_t DATAR9; + uint16_t RESERVED9; + __IO uint16_t DATAR10; + uint16_t RESERVED10; + __IO uint16_t OCTLR; + uint16_t RESERVED11; + __IO uint16_t TPCTLR; + uint16_t RESERVED12; + __IO uint16_t TPCSR; + uint16_t RESERVED13[5]; + __IO uint16_t DATAR11; + uint16_t RESERVED14; + __IO uint16_t DATAR12; + uint16_t RESERVED15; + __IO uint16_t DATAR13; + uint16_t RESERVED16; + __IO uint16_t DATAR14; + uint16_t RESERVED17; + __IO uint16_t DATAR15; + uint16_t RESERVED18; + __IO uint16_t DATAR16; + uint16_t RESERVED19; + __IO uint16_t DATAR17; + uint16_t RESERVED20; + __IO uint16_t DATAR18; + uint16_t RESERVED21; + __IO uint16_t DATAR19; + uint16_t RESERVED22; + __IO uint16_t DATAR20; + uint16_t RESERVED23; + __IO uint16_t DATAR21; + uint16_t RESERVED24; + __IO uint16_t DATAR22; + uint16_t RESERVED25; + __IO uint16_t DATAR23; + uint16_t RESERVED26; + __IO uint16_t DATAR24; + uint16_t RESERVED27; + __IO uint16_t DATAR25; + uint16_t RESERVED28; + __IO uint16_t DATAR26; + uint16_t RESERVED29; + __IO uint16_t DATAR27; + uint16_t RESERVED30; + __IO uint16_t DATAR28; + uint16_t RESERVED31; + __IO uint16_t DATAR29; + uint16_t RESERVED32; + __IO uint16_t DATAR30; + uint16_t RESERVED33; + __IO uint16_t DATAR31; + uint16_t RESERVED34; + __IO uint16_t DATAR32; + uint16_t RESERVED35; + __IO uint16_t DATAR33; + uint16_t RESERVED36; + __IO uint16_t DATAR34; + uint16_t RESERVED37; + __IO uint16_t DATAR35; + uint16_t RESERVED38; + __IO uint16_t DATAR36; + uint16_t RESERVED39; + __IO uint16_t DATAR37; + uint16_t RESERVED40; + __IO uint16_t DATAR38; + uint16_t RESERVED41; + __IO uint16_t DATAR39; + uint16_t RESERVED42; + __IO uint16_t DATAR40; + uint16_t RESERVED43; + __IO uint16_t DATAR41; + uint16_t RESERVED44; + __IO uint16_t DATAR42; + uint16_t RESERVED45; +} BKP_TypeDef; + +/* Controller Area Network TxMailBox */ +typedef struct +{ + __IO uint32_t TXMIR; + __IO uint32_t TXMDTR; + __IO uint32_t TXMDLR; + __IO uint32_t TXMDHR; +} CAN_TxMailBox_TypeDef; + +/* Controller Area Network FIFOMailBox */ +typedef struct +{ + __IO uint32_t RXMIR; + __IO uint32_t RXMDTR; + __IO uint32_t RXMDLR; + __IO uint32_t RXMDHR; +} CAN_FIFOMailBox_TypeDef; + +/* Controller Area Network FilterRegister */ +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/* Controller Area Network */ +typedef struct +{ + __IO uint32_t CTLR; + __IO uint32_t STATR; + __IO uint32_t TSTATR; + __IO uint32_t RFIFO0; + __IO uint32_t RFIFO1; + __IO uint32_t INTENR; + __IO uint32_t ERRSR; + __IO uint32_t BTIMR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FCTLR; + __IO uint32_t FMCFGR; + uint32_t RESERVED2; + __IO uint32_t FSCFGR; + uint32_t RESERVED3; + __IO uint32_t FAFIFOR; + uint32_t RESERVED4; + __IO uint32_t FWR; + uint32_t RESERVED5[8]; + CAN_FilterRegister_TypeDef sFilterRegister[28]; +} CAN_TypeDef; + +/* CRC Calculation Unit */ +typedef struct +{ + __IO uint32_t DATAR; + __IO uint8_t IDATAR; + uint8_t RESERVED0; + uint16_t RESERVED1; + __IO uint32_t CTLR; +} CRC_TypeDef; + +/* DMA Channel Controller */ +typedef struct +{ + __IO uint32_t CFGR; + __IO uint32_t CNTR; + __IO uint32_t PADDR; + __IO uint32_t MADDR; +} DMA_Channel_TypeDef; + +/* DMA Controller */ +typedef struct +{ + __IO uint32_t INTFR; + __IO uint32_t INTFCR; +} DMA_TypeDef; + +/* External Interrupt/Event Controller */ +typedef struct +{ + __IO uint32_t INTENR; + __IO uint32_t EVENR; + __IO uint32_t RTENR; + __IO uint32_t FTENR; + __IO uint32_t SWIEVR; + __IO uint32_t INTFR; +} EXTI_TypeDef; + +/* FLASH Registers */ +typedef struct +{ + __IO uint32_t ACTLR; + __IO uint32_t KEYR; + __IO uint32_t OBKEYR; + __IO uint32_t STATR; + __IO uint32_t CTLR; + __IO uint32_t ADDR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WPR; + __IO uint32_t MODEKEYR; +} FLASH_TypeDef; + +/* Option Bytes Registers */ +typedef struct +{ + __IO uint16_t RDPR; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRPR0; + __IO uint16_t WRPR1; + __IO uint16_t WRPR2; + __IO uint16_t WRPR3; +} OB_TypeDef; + +/* General Purpose I/O */ +typedef struct +{ + __IO uint32_t CFGLR; + __IO uint32_t CFGHR; + __IO uint32_t INDR; + __IO uint32_t OUTDR; + __IO uint32_t BSHR; + __IO uint32_t BCR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/* Alternate Function I/O */ +typedef struct +{ + __IO uint32_t ECR; + __IO uint32_t PCFR1; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t PCFR2; +} AFIO_TypeDef; + +/* Inter Integrated Circuit Interface */ +typedef struct +{ + __IO uint16_t CTLR1; + uint16_t RESERVED0; + __IO uint16_t CTLR2; + uint16_t RESERVED1; + __IO uint16_t OADDR1; + uint16_t RESERVED2; + __IO uint16_t OADDR2; + uint16_t RESERVED3; + __IO uint16_t DATAR; + uint16_t RESERVED4; + __IO uint16_t STAR1; + uint16_t RESERVED5; + __IO uint16_t STAR2; + uint16_t RESERVED6; + __IO uint16_t CKCFGR; + uint16_t RESERVED7; + __IO uint16_t RTR; + uint16_t RESERVED8; +} I2C_TypeDef; + +/* Independent WatchDog */ +typedef struct +{ + __IO uint32_t CTLR; + __IO uint32_t PSCR; + __IO uint32_t RLDR; + __IO uint32_t STATR; +} IWDG_TypeDef; + +/* Power Control */ +typedef struct +{ + __IO uint32_t CTLR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/* Reset and Clock Control */ +typedef struct +{ + __IO uint32_t CTLR; + __IO uint32_t CFGR0; + __IO uint32_t INTR; + __IO uint32_t APB2PRSTR; + __IO uint32_t APB1PRSTR; + __IO uint32_t AHBPCENR; + __IO uint32_t APB2PCENR; + __IO uint32_t APB1PCENR; + __IO uint32_t BDCTLR; + __IO uint32_t RSTSCKR; + + __IO uint32_t AHBRSTR; + __IO uint32_t CFGR2; +} RCC_TypeDef; + +/* Real-Time Clock */ +typedef struct +{ + __IO uint16_t CTLRH; + uint16_t RESERVED0; + __IO uint16_t CTLRL; + uint16_t RESERVED1; + __IO uint16_t PSCRH; + uint16_t RESERVED2; + __IO uint16_t PSCRL; + uint16_t RESERVED3; + __IO uint16_t DIVH; + uint16_t RESERVED4; + __IO uint16_t DIVL; + uint16_t RESERVED5; + __IO uint16_t CNTH; + uint16_t RESERVED6; + __IO uint16_t CNTL; + uint16_t RESERVED7; + __IO uint16_t ALRMH; + uint16_t RESERVED8; + __IO uint16_t ALRML; + uint16_t RESERVED9; +} RTC_TypeDef; + +/* Serial Peripheral Interface */ +typedef struct +{ + __IO uint16_t CTLR1; + uint16_t RESERVED0; + __IO uint16_t CTLR2; + uint16_t RESERVED1; + __IO uint16_t STATR; + uint16_t RESERVED2; + __IO uint16_t DATAR; + uint16_t RESERVED3; + __IO uint16_t CRCR; + uint16_t RESERVED4; + __IO uint16_t RCRCR; + uint16_t RESERVED5; + __IO uint16_t TCRCR; + uint16_t RESERVED6; + __IO uint16_t I2SCFGR; + uint16_t RESERVED7; + __IO uint16_t I2SPR; + uint16_t RESERVED8; + __IO uint16_t HSCR; + uint16_t RESERVED9; +} SPI_TypeDef; + +/* TIM */ +typedef struct +{ + __IO uint16_t CTLR1; + uint16_t RESERVED0; + __IO uint16_t CTLR2; + uint16_t RESERVED1; + __IO uint16_t SMCFGR; + uint16_t RESERVED2; + __IO uint16_t DMAINTENR; + uint16_t RESERVED3; + __IO uint16_t INTFR; + uint16_t RESERVED4; + __IO uint16_t SWEVGR; + uint16_t RESERVED5; + __IO uint16_t CHCTLR1; + uint16_t RESERVED6; + __IO uint16_t CHCTLR2; + uint16_t RESERVED7; + __IO uint16_t CCER; + uint16_t RESERVED8; + union + { + __IO uint32_t CNT_R32; + struct + { + __IO uint16_t CNT; + uint16_t RESERVED9; + }; + }; + __IO uint16_t PSC; + uint16_t RESERVED10; + union + { + __IO uint32_t ATRLR_R32; + struct + { + __IO uint16_t ATRLR; + uint16_t RESERVED11; + }; + }; + __IO uint16_t RPTCR; + uint16_t RESERVED12; + union + { + __IO uint32_t CH1CVR_R32; + struct + { + __IO uint16_t CH1CVR; + uint16_t RESERVED13; + }; + }; + union + { + __IO uint32_t CH2CVR_R32; + struct + { + __IO uint16_t CH2CVR; + uint16_t RESERVED14; + }; + }; + union + { + __IO uint32_t CH3CVR_R32; + struct + { + __IO uint16_t CH3CVR; + uint16_t RESERVED15; + }; + }; + union + { + __IO uint32_t CH4CVR_R32; + struct + { + __IO uint16_t CH4CVR; + uint16_t RESERVED16; + }; + }; + __IO uint16_t BDTR; + uint16_t RESERVED17; + __IO uint16_t DMACFGR; + uint16_t RESERVED18; + __IO uint16_t DMAADR; + uint16_t RESERVED19; +} TIM_TypeDef; + +/* Universal Synchronous Asynchronous Receiver Transmitter */ +typedef struct +{ + __IO uint16_t STATR; + uint16_t RESERVED0; + __IO uint16_t DATAR; + uint16_t RESERVED1; + __IO uint16_t BRR; + uint16_t RESERVED2; + __IO uint16_t CTLR1; + uint16_t RESERVED3; + __IO uint16_t CTLR2; + uint16_t RESERVED4; + __IO uint16_t CTLR3; + uint16_t RESERVED5; + __IO uint16_t GPR; + uint16_t RESERVED6; +} USART_TypeDef; + +/* Window WatchDog */ +typedef struct +{ + __IO uint32_t CTLR; + __IO uint32_t CFGR; + __IO uint32_t STATR; +} WWDG_TypeDef; + +/* Enhanced Registers */ +typedef struct +{ + __IO uint32_t EXTEN_CTR; +} EXTEN_TypeDef; + +/* OPA Registers */ +typedef struct +{ + __IO uint32_t CR; +} OPA_TypeDef; + +/* USBFS Registers */ +typedef struct +{ + __IO uint8_t BASE_CTRL; + __IO uint8_t UDEV_CTRL; + __IO uint8_t INT_EN; + __IO uint8_t DEV_ADDR; + __IO uint8_t Reserve0; + __IO uint8_t MIS_ST; + __IO uint8_t INT_FG; + __IO uint8_t INT_ST; + __IO uint32_t RX_LEN; + __IO uint8_t UEP4_1_MOD; + __IO uint8_t UEP2_3_MOD; + __IO uint8_t UEP5_6_MOD; + __IO uint8_t UEP7_MOD; + __IO uint32_t UEP0_DMA; + __IO uint32_t UEP1_DMA; + __IO uint32_t UEP2_DMA; + __IO uint32_t UEP3_DMA; + __IO uint32_t UEP4_DMA; + __IO uint32_t UEP5_DMA; + __IO uint32_t UEP6_DMA; + __IO uint32_t UEP7_DMA; + __IO uint16_t UEP0_TX_LEN; + __IO uint8_t UEP0_TX_CTRL; + __IO uint8_t UEP0_RX_CTRL; + __IO uint16_t UEP1_TX_LEN; + __IO uint8_t UEP1_TX_CTRL; + __IO uint8_t UEP1_RX_CTRL; + __IO uint16_t UEP2_TX_LEN; + __IO uint8_t UEP2_TX_CTRL; + __IO uint8_t UEP2_RX_CTRL; + __IO uint16_t UEP3_TX_LEN; + __IO uint8_t UEP3_TX_CTRL; + __IO uint8_t UEP3_RX_CTRL; + __IO uint16_t UEP4_TX_LEN; + __IO uint8_t UEP4_TX_CTRL; + __IO uint8_t UEP4_RX_CTRL; + __IO uint16_t UEP5_TX_LEN; + __IO uint8_t UEP5_TX_CTRL; + __IO uint8_t UEP5_RX_CTRL; + __IO uint16_t UEP6_TX_LEN; + __IO uint8_t UEP6_TX_CTRL; + __IO uint8_t UEP6_RX_CTRL; + __IO uint16_t UEP7_TX_LEN; + __IO uint8_t UEP7_TX_CTRL; + __IO uint8_t UEP7_RX_CTRL; + __IO uint32_t Reserve1; + __IO uint32_t OTG_CR; + __IO uint32_t OTG_SR; +} USBFSD_TypeDef; + +typedef struct +{ + __IO uint8_t BASE_CTRL; + __IO uint8_t HOST_CTRL; + __IO uint8_t INT_EN; + __IO uint8_t DEV_ADDR; + __IO uint8_t Reserve0; + __IO uint8_t MIS_ST; + __IO uint8_t INT_FG; + __IO uint8_t INT_ST; + __IO uint16_t RX_LEN; + __IO uint16_t Reserve1; + __IO uint8_t Reserve2; + __IO uint8_t HOST_EP_MOD; + __IO uint16_t Reserve3; + __IO uint32_t Reserve4; + __IO uint32_t Reserve5; + __IO uint32_t HOST_RX_DMA; + __IO uint32_t HOST_TX_DMA; + __IO uint32_t Reserve6; + __IO uint32_t Reserve7; + __IO uint32_t Reserve8; + __IO uint32_t Reserve9; + __IO uint32_t Reserve10; + __IO uint16_t Reserve11; + __IO uint16_t HOST_SETUP; + __IO uint8_t HOST_EP_PID; + __IO uint8_t Reserve12; + __IO uint8_t Reserve13; + __IO uint8_t HOST_RX_CTRL; + __IO uint16_t HOST_TX_LEN; + __IO uint8_t HOST_TX_CTRL; + __IO uint8_t Reserve14; + __IO uint32_t Reserve15; + __IO uint32_t Reserve16; + __IO uint32_t Reserve17; + __IO uint32_t Reserve18; + __IO uint32_t Reserve19; + __IO uint32_t OTG_CR; + __IO uint32_t OTG_SR; +} USBFSH_TypeDef; + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) +/* ETH10M Registers */ +typedef struct +{ + __IO uint8_t reserved1; + __IO uint8_t reserved2; + __IO uint8_t reserved3; + __IO uint8_t EIE; + + __IO uint8_t EIR; + __IO uint8_t ESTAT; + __IO uint8_t ECON2; + __IO uint8_t ECON1; + + __IO uint16_t ETXST; + __IO uint16_t ETXLN; + + __IO uint16_t ERXST; + __IO uint16_t ERXLN; + + __IO uint32_t HTL; + __IO uint32_t HTH; + + __IO uint8_t ERXFON; + __IO uint8_t MACON1; + __IO uint8_t MACON2; + __IO uint8_t MABBIPG; + + __IO uint16_t EPAUS; + __IO uint16_t MAMXFL; + + __IO uint16_t MIRD; + __IO uint16_t reserved4; + + __IO uint8_t MIERGADR; + __IO uint8_t MISTAT; + __IO uint16_t MIWR; + + __IO uint32_t MAADRL; + + __IO uint16_t MAADRH; + __IO uint16_t reserved5; +} ETH10M_TypeDef; +#endif + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) +/* OSC Registers */ +typedef struct +{ + __IO uint32_t HSE_CAL_CTRL; + __IO uint32_t Reserve0; + __IO uint16_t Reserve1; + __IO uint16_t LSI32K_TUNE; + __IO uint32_t Reserve2; + __IO uint32_t Reserve3; + __IO uint32_t Reserve4; + __IO uint32_t Reserve5; + __IO uint8_t Reserve6; + __IO uint8_t LSI32K_CAL_CFG; + __IO uint16_t Reserve7; + __IO uint16_t LSI32K_CAL_STATR; + __IO uint8_t LSI32K_CAL_OV_CNT; + __IO uint8_t LSI32K_CAL_CTRL; +} OSC_TypeDef; + +#endif + +/* Peripheral memory map */ +#define FLASH_BASE ((uint32_t)0x08000000) /* FLASH base address in the alias region */ +#define SRAM_BASE ((uint32_t)0x20000000) /* SRAM base address in the alias region */ +#define PERIPH_BASE ((uint32_t)0x40000000) /* Peripheral base address in the alias region */ + +#define APB1PERIPH_BASE (PERIPH_BASE) +#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000) + +#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) +#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) +#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00) +#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) +#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define USART1_BASE (APB2PERIPH_BASE + 0x3800) + +#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) +#define DMA1_Channel8_BASE (AHBPERIPH_BASE + 0x0094) +#define RCC_BASE (AHBPERIPH_BASE + 0x1000) +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) +#define CRC_BASE (AHBPERIPH_BASE + 0x3000) +#define EXTEN_BASE (AHBPERIPH_BASE + 0x3800) +#define OPA_BASE (AHBPERIPH_BASE + 0x3804) +#define ETH10M_BASE (AHBPERIPH_BASE + 0x8000) + +#define USBFS_BASE ((uint32_t)0x50000000) + +#define OB_BASE ((uint32_t)0x1FFFF800) + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) +#define OSC_BASE (AHBPERIPH_BASE + 0x202C) +#endif + +/* Peripheral declaration */ +#define TIM2 ((TIM_TypeDef *)TIM2_BASE) +#define TIM3 ((TIM_TypeDef *)TIM3_BASE) +#define TIM4 ((TIM_TypeDef *)TIM4_BASE) +#define TIM5 ((TIM_TypeDef *)TIM5_BASE) +#define RTC ((RTC_TypeDef *)RTC_BASE) +#define WWDG ((WWDG_TypeDef *)WWDG_BASE) +#define IWDG ((IWDG_TypeDef *)IWDG_BASE) +#define SPI2 ((SPI_TypeDef *)SPI2_BASE) +#define USART2 ((USART_TypeDef *)USART2_BASE) +#define USART3 ((USART_TypeDef *)USART3_BASE) +#define UART4 ((USART_TypeDef *)UART4_BASE) +#define I2C1 ((I2C_TypeDef *)I2C1_BASE) +#define I2C2 ((I2C_TypeDef *)I2C2_BASE) +#define CAN1 ((CAN_TypeDef *)CAN1_BASE) +#define BKP ((BKP_TypeDef *)BKP_BASE) +#define PWR ((PWR_TypeDef *)PWR_BASE) + +#define AFIO ((AFIO_TypeDef *)AFIO_BASE) +#define EXTI ((EXTI_TypeDef *)EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *)GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *)GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *)GPIOG_BASE) +#define ADC1 ((ADC_TypeDef *)ADC1_BASE) +#define ADC2 ((ADC_TypeDef *)ADC2_BASE) +#define TKey1 ((ADC_TypeDef *)ADC1_BASE) +#define TKey2 ((ADC_TypeDef *)ADC2_BASE) +#define TIM1 ((TIM_TypeDef *)TIM1_BASE) +#define SPI1 ((SPI_TypeDef *)SPI1_BASE) +#define USART1 ((USART_TypeDef *)USART1_BASE) + +#define DMA1 ((DMA_TypeDef *)DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE) +#define DMA1_Channel8 ((DMA_Channel_TypeDef *)DMA1_Channel8_BASE) +#define RCC ((RCC_TypeDef *)RCC_BASE) +#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE) +#define CRC ((CRC_TypeDef *)CRC_BASE) +#define USBFSD ((USBFSD_TypeDef *)USBFS_BASE) +#define USBFSH ((USBFSH_TypeDef *)USBFS_BASE) +#define EXTEN ((EXTEN_TypeDef *)EXTEN_BASE) +#define OPA ((OPA_TypeDef *)OPA_BASE) +#define ETH10M ((ETH10M_TypeDef *)ETH10M_BASE) + +#define OB ((OB_TypeDef *)OB_BASE) + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) +#define OSC ((OSC_TypeDef *)OSC_BASE) +#endif + + +/******************************************************************************/ +/* Peripheral Registers Bits Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* Analog to Digital Converter */ +/******************************************************************************/ + +/******************** Bit definition for ADC_STATR register ********************/ +#define ADC_AWD ((uint8_t)0x01) /* Analog watchdog flag */ +#define ADC_EOC ((uint8_t)0x02) /* End of conversion */ +#define ADC_JEOC ((uint8_t)0x04) /* Injected channel end of conversion */ +#define ADC_JSTRT ((uint8_t)0x08) /* Injected channel Start flag */ +#define ADC_STRT ((uint8_t)0x10) /* Regular channel Start flag */ + +/******************* Bit definition for ADC_CTLR1 register ********************/ +#define ADC_AWDCH ((uint32_t)0x0000001F) /* AWDCH[4:0] bits (Analog watchdog channel select bits) */ +#define ADC_AWDCH_0 ((uint32_t)0x00000001) /* Bit 0 */ +#define ADC_AWDCH_1 ((uint32_t)0x00000002) /* Bit 1 */ +#define ADC_AWDCH_2 ((uint32_t)0x00000004) /* Bit 2 */ +#define ADC_AWDCH_3 ((uint32_t)0x00000008) /* Bit 3 */ +#define ADC_AWDCH_4 ((uint32_t)0x00000010) /* Bit 4 */ + +#define ADC_EOCIE ((uint32_t)0x00000020) /* Interrupt enable for EOC */ +#define ADC_AWDIE ((uint32_t)0x00000040) /* Analog Watchdog interrupt enable */ +#define ADC_JEOCIE ((uint32_t)0x00000080) /* Interrupt enable for injected channels */ +#define ADC_SCAN ((uint32_t)0x00000100) /* Scan mode */ +#define ADC_AWDSGL ((uint32_t)0x00000200) /* Enable the watchdog on a single channel in scan mode */ +#define ADC_JAUTO ((uint32_t)0x00000400) /* Automatic injected group conversion */ +#define ADC_DISCEN ((uint32_t)0x00000800) /* Discontinuous mode on regular channels */ +#define ADC_JDISCEN ((uint32_t)0x00001000) /* Discontinuous mode on injected channels */ + +#define ADC_DISCNUM ((uint32_t)0x0000E000) /* DISCNUM[2:0] bits (Discontinuous mode channel count) */ +#define ADC_DISCNUM_0 ((uint32_t)0x00002000) /* Bit 0 */ +#define ADC_DISCNUM_1 ((uint32_t)0x00004000) /* Bit 1 */ +#define ADC_DISCNUM_2 ((uint32_t)0x00008000) /* Bit 2 */ + +#define ADC_DUALMOD ((uint32_t)0x000F0000) /* DUALMOD[3:0] bits (Dual mode selection) */ +#define ADC_DUALMOD_0 ((uint32_t)0x00010000) /* Bit 0 */ +#define ADC_DUALMOD_1 ((uint32_t)0x00020000) /* Bit 1 */ +#define ADC_DUALMOD_2 ((uint32_t)0x00040000) /* Bit 2 */ +#define ADC_DUALMOD_3 ((uint32_t)0x00080000) /* Bit 3 */ + +#define ADC_JAWDEN ((uint32_t)0x00400000) /* Analog watchdog enable on injected channels */ +#define ADC_AWDEN ((uint32_t)0x00800000) /* Analog watchdog enable on regular channels */ + +/******************* Bit definition for ADC_CTLR2 register ********************/ +#define ADC_ADON ((uint32_t)0x00000001) /* A/D Converter ON / OFF */ +#define ADC_CONT ((uint32_t)0x00000002) /* Continuous Conversion */ +#define ADC_CAL ((uint32_t)0x00000004) /* A/D Calibration */ +#define ADC_RSTCAL ((uint32_t)0x00000008) /* Reset Calibration */ +#define ADC_DMA ((uint32_t)0x00000100) /* Direct Memory access mode */ +#define ADC_ALIGN ((uint32_t)0x00000800) /* Data Alignment */ + +#define ADC_JEXTSEL ((uint32_t)0x00007000) /* JEXTSEL[2:0] bits (External event select for injected group) */ +#define ADC_JEXTSEL_0 ((uint32_t)0x00001000) /* Bit 0 */ +#define ADC_JEXTSEL_1 ((uint32_t)0x00002000) /* Bit 1 */ +#define ADC_JEXTSEL_2 ((uint32_t)0x00004000) /* Bit 2 */ + +#define ADC_JEXTTRIG ((uint32_t)0x00008000) /* External Trigger Conversion mode for injected channels */ + +#define ADC_EXTSEL ((uint32_t)0x000E0000) /* EXTSEL[2:0] bits (External Event Select for regular group) */ +#define ADC_EXTSEL_0 ((uint32_t)0x00020000) /* Bit 0 */ +#define ADC_EXTSEL_1 ((uint32_t)0x00040000) /* Bit 1 */ +#define ADC_EXTSEL_2 ((uint32_t)0x00080000) /* Bit 2 */ + +#define ADC_EXTTRIG ((uint32_t)0x00100000) /* External Trigger Conversion mode for regular channels */ +#define ADC_JSWSTART ((uint32_t)0x00200000) /* Start Conversion of injected channels */ +#define ADC_SWSTART ((uint32_t)0x00400000) /* Start Conversion of regular channels */ +#define ADC_TSVREFE ((uint32_t)0x00800000) /* Temperature Sensor and VREFINT Enable */ + +/****************** Bit definition for ADC_SAMPTR1 register *******************/ +#define ADC_SMP10 ((uint32_t)0x00000007) /* SMP10[2:0] bits (Channel 10 Sample time selection) */ +#define ADC_SMP10_0 ((uint32_t)0x00000001) /* Bit 0 */ +#define ADC_SMP10_1 ((uint32_t)0x00000002) /* Bit 1 */ +#define ADC_SMP10_2 ((uint32_t)0x00000004) /* Bit 2 */ + +#define ADC_SMP11 ((uint32_t)0x00000038) /* SMP11[2:0] bits (Channel 11 Sample time selection) */ +#define ADC_SMP11_0 ((uint32_t)0x00000008) /* Bit 0 */ +#define ADC_SMP11_1 ((uint32_t)0x00000010) /* Bit 1 */ +#define ADC_SMP11_2 ((uint32_t)0x00000020) /* Bit 2 */ + +#define ADC_SMP12 ((uint32_t)0x000001C0) /* SMP12[2:0] bits (Channel 12 Sample time selection) */ +#define ADC_SMP12_0 ((uint32_t)0x00000040) /* Bit 0 */ +#define ADC_SMP12_1 ((uint32_t)0x00000080) /* Bit 1 */ +#define ADC_SMP12_2 ((uint32_t)0x00000100) /* Bit 2 */ + +#define ADC_SMP13 ((uint32_t)0x00000E00) /* SMP13[2:0] bits (Channel 13 Sample time selection) */ +#define ADC_SMP13_0 ((uint32_t)0x00000200) /* Bit 0 */ +#define ADC_SMP13_1 ((uint32_t)0x00000400) /* Bit 1 */ +#define ADC_SMP13_2 ((uint32_t)0x00000800) /* Bit 2 */ + +#define ADC_SMP14 ((uint32_t)0x00007000) /* SMP14[2:0] bits (Channel 14 Sample time selection) */ +#define ADC_SMP14_0 ((uint32_t)0x00001000) /* Bit 0 */ +#define ADC_SMP14_1 ((uint32_t)0x00002000) /* Bit 1 */ +#define ADC_SMP14_2 ((uint32_t)0x00004000) /* Bit 2 */ + +#define ADC_SMP15 ((uint32_t)0x00038000) /* SMP15[2:0] bits (Channel 15 Sample time selection) */ +#define ADC_SMP15_0 ((uint32_t)0x00008000) /* Bit 0 */ +#define ADC_SMP15_1 ((uint32_t)0x00010000) /* Bit 1 */ +#define ADC_SMP15_2 ((uint32_t)0x00020000) /* Bit 2 */ + +#define ADC_SMP16 ((uint32_t)0x001C0000) /* SMP16[2:0] bits (Channel 16 Sample time selection) */ +#define ADC_SMP16_0 ((uint32_t)0x00040000) /* Bit 0 */ +#define ADC_SMP16_1 ((uint32_t)0x00080000) /* Bit 1 */ +#define ADC_SMP16_2 ((uint32_t)0x00100000) /* Bit 2 */ + +#define ADC_SMP17 ((uint32_t)0x00E00000) /* SMP17[2:0] bits (Channel 17 Sample time selection) */ +#define ADC_SMP17_0 ((uint32_t)0x00200000) /* Bit 0 */ +#define ADC_SMP17_1 ((uint32_t)0x00400000) /* Bit 1 */ +#define ADC_SMP17_2 ((uint32_t)0x00800000) /* Bit 2 */ + +/****************** Bit definition for ADC_SAMPTR2 register *******************/ +#define ADC_SMP0 ((uint32_t)0x00000007) /* SMP0[2:0] bits (Channel 0 Sample time selection) */ +#define ADC_SMP0_0 ((uint32_t)0x00000001) /* Bit 0 */ +#define ADC_SMP0_1 ((uint32_t)0x00000002) /* Bit 1 */ +#define ADC_SMP0_2 ((uint32_t)0x00000004) /* Bit 2 */ + +#define ADC_SMP1 ((uint32_t)0x00000038) /* SMP1[2:0] bits (Channel 1 Sample time selection) */ +#define ADC_SMP1_0 ((uint32_t)0x00000008) /* Bit 0 */ +#define ADC_SMP1_1 ((uint32_t)0x00000010) /* Bit 1 */ +#define ADC_SMP1_2 ((uint32_t)0x00000020) /* Bit 2 */ + +#define ADC_SMP2 ((uint32_t)0x000001C0) /* SMP2[2:0] bits (Channel 2 Sample time selection) */ +#define ADC_SMP2_0 ((uint32_t)0x00000040) /* Bit 0 */ +#define ADC_SMP2_1 ((uint32_t)0x00000080) /* Bit 1 */ +#define ADC_SMP2_2 ((uint32_t)0x00000100) /* Bit 2 */ + +#define ADC_SMP3 ((uint32_t)0x00000E00) /* SMP3[2:0] bits (Channel 3 Sample time selection) */ +#define ADC_SMP3_0 ((uint32_t)0x00000200) /* Bit 0 */ +#define ADC_SMP3_1 ((uint32_t)0x00000400) /* Bit 1 */ +#define ADC_SMP3_2 ((uint32_t)0x00000800) /* Bit 2 */ + +#define ADC_SMP4 ((uint32_t)0x00007000) /* SMP4[2:0] bits (Channel 4 Sample time selection) */ +#define ADC_SMP4_0 ((uint32_t)0x00001000) /* Bit 0 */ +#define ADC_SMP4_1 ((uint32_t)0x00002000) /* Bit 1 */ +#define ADC_SMP4_2 ((uint32_t)0x00004000) /* Bit 2 */ + +#define ADC_SMP5 ((uint32_t)0x00038000) /* SMP5[2:0] bits (Channel 5 Sample time selection) */ +#define ADC_SMP5_0 ((uint32_t)0x00008000) /* Bit 0 */ +#define ADC_SMP5_1 ((uint32_t)0x00010000) /* Bit 1 */ +#define ADC_SMP5_2 ((uint32_t)0x00020000) /* Bit 2 */ + +#define ADC_SMP6 ((uint32_t)0x001C0000) /* SMP6[2:0] bits (Channel 6 Sample time selection) */ +#define ADC_SMP6_0 ((uint32_t)0x00040000) /* Bit 0 */ +#define ADC_SMP6_1 ((uint32_t)0x00080000) /* Bit 1 */ +#define ADC_SMP6_2 ((uint32_t)0x00100000) /* Bit 2 */ + +#define ADC_SMP7 ((uint32_t)0x00E00000) /* SMP7[2:0] bits (Channel 7 Sample time selection) */ +#define ADC_SMP7_0 ((uint32_t)0x00200000) /* Bit 0 */ +#define ADC_SMP7_1 ((uint32_t)0x00400000) /* Bit 1 */ +#define ADC_SMP7_2 ((uint32_t)0x00800000) /* Bit 2 */ + +#define ADC_SMP8 ((uint32_t)0x07000000) /* SMP8[2:0] bits (Channel 8 Sample time selection) */ +#define ADC_SMP8_0 ((uint32_t)0x01000000) /* Bit 0 */ +#define ADC_SMP8_1 ((uint32_t)0x02000000) /* Bit 1 */ +#define ADC_SMP8_2 ((uint32_t)0x04000000) /* Bit 2 */ + +#define ADC_SMP9 ((uint32_t)0x38000000) /* SMP9[2:0] bits (Channel 9 Sample time selection) */ +#define ADC_SMP9_0 ((uint32_t)0x08000000) /* Bit 0 */ +#define ADC_SMP9_1 ((uint32_t)0x10000000) /* Bit 1 */ +#define ADC_SMP9_2 ((uint32_t)0x20000000) /* Bit 2 */ + +/****************** Bit definition for ADC_IOFR1 register *******************/ +#define ADC_JOFFSET1 ((uint16_t)0x0FFF) /* Data offset for injected channel 1 */ + +/****************** Bit definition for ADC_IOFR2 register *******************/ +#define ADC_JOFFSET2 ((uint16_t)0x0FFF) /* Data offset for injected channel 2 */ + +/****************** Bit definition for ADC_IOFR3 register *******************/ +#define ADC_JOFFSET3 ((uint16_t)0x0FFF) /* Data offset for injected channel 3 */ + +/****************** Bit definition for ADC_IOFR4 register *******************/ +#define ADC_JOFFSET4 ((uint16_t)0x0FFF) /* Data offset for injected channel 4 */ + +/******************* Bit definition for ADC_WDHTR register ********************/ +#define ADC_HT ((uint16_t)0x0FFF) /* Analog watchdog high threshold */ + +/******************* Bit definition for ADC_WDLTR register ********************/ +#define ADC_LT ((uint16_t)0x0FFF) /* Analog watchdog low threshold */ + +/******************* Bit definition for ADC_RSQR1 register *******************/ +#define ADC_SQ13 ((uint32_t)0x0000001F) /* SQ13[4:0] bits (13th conversion in regular sequence) */ +#define ADC_SQ13_0 ((uint32_t)0x00000001) /* Bit 0 */ +#define ADC_SQ13_1 ((uint32_t)0x00000002) /* Bit 1 */ +#define ADC_SQ13_2 ((uint32_t)0x00000004) /* Bit 2 */ +#define ADC_SQ13_3 ((uint32_t)0x00000008) /* Bit 3 */ +#define ADC_SQ13_4 ((uint32_t)0x00000010) /* Bit 4 */ + +#define ADC_SQ14 ((uint32_t)0x000003E0) /* SQ14[4:0] bits (14th conversion in regular sequence) */ +#define ADC_SQ14_0 ((uint32_t)0x00000020) /* Bit 0 */ +#define ADC_SQ14_1 ((uint32_t)0x00000040) /* Bit 1 */ +#define ADC_SQ14_2 ((uint32_t)0x00000080) /* Bit 2 */ +#define ADC_SQ14_3 ((uint32_t)0x00000100) /* Bit 3 */ +#define ADC_SQ14_4 ((uint32_t)0x00000200) /* Bit 4 */ + +#define ADC_SQ15 ((uint32_t)0x00007C00) /* SQ15[4:0] bits (15th conversion in regular sequence) */ +#define ADC_SQ15_0 ((uint32_t)0x00000400) /* Bit 0 */ +#define ADC_SQ15_1 ((uint32_t)0x00000800) /* Bit 1 */ +#define ADC_SQ15_2 ((uint32_t)0x00001000) /* Bit 2 */ +#define ADC_SQ15_3 ((uint32_t)0x00002000) /* Bit 3 */ +#define ADC_SQ15_4 ((uint32_t)0x00004000) /* Bit 4 */ + +#define ADC_SQ16 ((uint32_t)0x000F8000) /* SQ16[4:0] bits (16th conversion in regular sequence) */ +#define ADC_SQ16_0 ((uint32_t)0x00008000) /* Bit 0 */ +#define ADC_SQ16_1 ((uint32_t)0x00010000) /* Bit 1 */ +#define ADC_SQ16_2 ((uint32_t)0x00020000) /* Bit 2 */ +#define ADC_SQ16_3 ((uint32_t)0x00040000) /* Bit 3 */ +#define ADC_SQ16_4 ((uint32_t)0x00080000) /* Bit 4 */ + +#define ADC_L ((uint32_t)0x00F00000) /* L[3:0] bits (Regular channel sequence length) */ +#define ADC_L_0 ((uint32_t)0x00100000) /* Bit 0 */ +#define ADC_L_1 ((uint32_t)0x00200000) /* Bit 1 */ +#define ADC_L_2 ((uint32_t)0x00400000) /* Bit 2 */ +#define ADC_L_3 ((uint32_t)0x00800000) /* Bit 3 */ + +/******************* Bit definition for ADC_RSQR2 register *******************/ +#define ADC_SQ7 ((uint32_t)0x0000001F) /* SQ7[4:0] bits (7th conversion in regular sequence) */ +#define ADC_SQ7_0 ((uint32_t)0x00000001) /* Bit 0 */ +#define ADC_SQ7_1 ((uint32_t)0x00000002) /* Bit 1 */ +#define ADC_SQ7_2 ((uint32_t)0x00000004) /* Bit 2 */ +#define ADC_SQ7_3 ((uint32_t)0x00000008) /* Bit 3 */ +#define ADC_SQ7_4 ((uint32_t)0x00000010) /* Bit 4 */ + +#define ADC_SQ8 ((uint32_t)0x000003E0) /* SQ8[4:0] bits (8th conversion in regular sequence) */ +#define ADC_SQ8_0 ((uint32_t)0x00000020) /* Bit 0 */ +#define ADC_SQ8_1 ((uint32_t)0x00000040) /* Bit 1 */ +#define ADC_SQ8_2 ((uint32_t)0x00000080) /* Bit 2 */ +#define ADC_SQ8_3 ((uint32_t)0x00000100) /* Bit 3 */ +#define ADC_SQ8_4 ((uint32_t)0x00000200) /* Bit 4 */ + +#define ADC_SQ9 ((uint32_t)0x00007C00) /* SQ9[4:0] bits (9th conversion in regular sequence) */ +#define ADC_SQ9_0 ((uint32_t)0x00000400) /* Bit 0 */ +#define ADC_SQ9_1 ((uint32_t)0x00000800) /* Bit 1 */ +#define ADC_SQ9_2 ((uint32_t)0x00001000) /* Bit 2 */ +#define ADC_SQ9_3 ((uint32_t)0x00002000) /* Bit 3 */ +#define ADC_SQ9_4 ((uint32_t)0x00004000) /* Bit 4 */ + +#define ADC_SQ10 ((uint32_t)0x000F8000) /* SQ10[4:0] bits (10th conversion in regular sequence) */ +#define ADC_SQ10_0 ((uint32_t)0x00008000) /* Bit 0 */ +#define ADC_SQ10_1 ((uint32_t)0x00010000) /* Bit 1 */ +#define ADC_SQ10_2 ((uint32_t)0x00020000) /* Bit 2 */ +#define ADC_SQ10_3 ((uint32_t)0x00040000) /* Bit 3 */ +#define ADC_SQ10_4 ((uint32_t)0x00080000) /* Bit 4 */ + +#define ADC_SQ11 ((uint32_t)0x01F00000) /* SQ11[4:0] bits (11th conversion in regular sequence) */ +#define ADC_SQ11_0 ((uint32_t)0x00100000) /* Bit 0 */ +#define ADC_SQ11_1 ((uint32_t)0x00200000) /* Bit 1 */ +#define ADC_SQ11_2 ((uint32_t)0x00400000) /* Bit 2 */ +#define ADC_SQ11_3 ((uint32_t)0x00800000) /* Bit 3 */ +#define ADC_SQ11_4 ((uint32_t)0x01000000) /* Bit 4 */ + +#define ADC_SQ12 ((uint32_t)0x3E000000) /* SQ12[4:0] bits (12th conversion in regular sequence) */ +#define ADC_SQ12_0 ((uint32_t)0x02000000) /* Bit 0 */ +#define ADC_SQ12_1 ((uint32_t)0x04000000) /* Bit 1 */ +#define ADC_SQ12_2 ((uint32_t)0x08000000) /* Bit 2 */ +#define ADC_SQ12_3 ((uint32_t)0x10000000) /* Bit 3 */ +#define ADC_SQ12_4 ((uint32_t)0x20000000) /* Bit 4 */ + +/******************* Bit definition for ADC_RSQR3 register *******************/ +#define ADC_SQ1 ((uint32_t)0x0000001F) /* SQ1[4:0] bits (1st conversion in regular sequence) */ +#define ADC_SQ1_0 ((uint32_t)0x00000001) /* Bit 0 */ +#define ADC_SQ1_1 ((uint32_t)0x00000002) /* Bit 1 */ +#define ADC_SQ1_2 ((uint32_t)0x00000004) /* Bit 2 */ +#define ADC_SQ1_3 ((uint32_t)0x00000008) /* Bit 3 */ +#define ADC_SQ1_4 ((uint32_t)0x00000010) /* Bit 4 */ + +#define ADC_SQ2 ((uint32_t)0x000003E0) /* SQ2[4:0] bits (2nd conversion in regular sequence) */ +#define ADC_SQ2_0 ((uint32_t)0x00000020) /* Bit 0 */ +#define ADC_SQ2_1 ((uint32_t)0x00000040) /* Bit 1 */ +#define ADC_SQ2_2 ((uint32_t)0x00000080) /* Bit 2 */ +#define ADC_SQ2_3 ((uint32_t)0x00000100) /* Bit 3 */ +#define ADC_SQ2_4 ((uint32_t)0x00000200) /* Bit 4 */ + +#define ADC_SQ3 ((uint32_t)0x00007C00) /* SQ3[4:0] bits (3rd conversion in regular sequence) */ +#define ADC_SQ3_0 ((uint32_t)0x00000400) /* Bit 0 */ +#define ADC_SQ3_1 ((uint32_t)0x00000800) /* Bit 1 */ +#define ADC_SQ3_2 ((uint32_t)0x00001000) /* Bit 2 */ +#define ADC_SQ3_3 ((uint32_t)0x00002000) /* Bit 3 */ +#define ADC_SQ3_4 ((uint32_t)0x00004000) /* Bit 4 */ + +#define ADC_SQ4 ((uint32_t)0x000F8000) /* SQ4[4:0] bits (4th conversion in regular sequence) */ +#define ADC_SQ4_0 ((uint32_t)0x00008000) /* Bit 0 */ +#define ADC_SQ4_1 ((uint32_t)0x00010000) /* Bit 1 */ +#define ADC_SQ4_2 ((uint32_t)0x00020000) /* Bit 2 */ +#define ADC_SQ4_3 ((uint32_t)0x00040000) /* Bit 3 */ +#define ADC_SQ4_4 ((uint32_t)0x00080000) /* Bit 4 */ + +#define ADC_SQ5 ((uint32_t)0x01F00000) /* SQ5[4:0] bits (5th conversion in regular sequence) */ +#define ADC_SQ5_0 ((uint32_t)0x00100000) /* Bit 0 */ +#define ADC_SQ5_1 ((uint32_t)0x00200000) /* Bit 1 */ +#define ADC_SQ5_2 ((uint32_t)0x00400000) /* Bit 2 */ +#define ADC_SQ5_3 ((uint32_t)0x00800000) /* Bit 3 */ +#define ADC_SQ5_4 ((uint32_t)0x01000000) /* Bit 4 */ + +#define ADC_SQ6 ((uint32_t)0x3E000000) /* SQ6[4:0] bits (6th conversion in regular sequence) */ +#define ADC_SQ6_0 ((uint32_t)0x02000000) /* Bit 0 */ +#define ADC_SQ6_1 ((uint32_t)0x04000000) /* Bit 1 */ +#define ADC_SQ6_2 ((uint32_t)0x08000000) /* Bit 2 */ +#define ADC_SQ6_3 ((uint32_t)0x10000000) /* Bit 3 */ +#define ADC_SQ6_4 ((uint32_t)0x20000000) /* Bit 4 */ + +/******************* Bit definition for ADC_ISQR register *******************/ +#define ADC_JSQ1 ((uint32_t)0x0000001F) /* JSQ1[4:0] bits (1st conversion in injected sequence) */ +#define ADC_JSQ1_0 ((uint32_t)0x00000001) /* Bit 0 */ +#define ADC_JSQ1_1 ((uint32_t)0x00000002) /* Bit 1 */ +#define ADC_JSQ1_2 ((uint32_t)0x00000004) /* Bit 2 */ +#define ADC_JSQ1_3 ((uint32_t)0x00000008) /* Bit 3 */ +#define ADC_JSQ1_4 ((uint32_t)0x00000010) /* Bit 4 */ + +#define ADC_JSQ2 ((uint32_t)0x000003E0) /* JSQ2[4:0] bits (2nd conversion in injected sequence) */ +#define ADC_JSQ2_0 ((uint32_t)0x00000020) /* Bit 0 */ +#define ADC_JSQ2_1 ((uint32_t)0x00000040) /* Bit 1 */ +#define ADC_JSQ2_2 ((uint32_t)0x00000080) /* Bit 2 */ +#define ADC_JSQ2_3 ((uint32_t)0x00000100) /* Bit 3 */ +#define ADC_JSQ2_4 ((uint32_t)0x00000200) /* Bit 4 */ + +#define ADC_JSQ3 ((uint32_t)0x00007C00) /* JSQ3[4:0] bits (3rd conversion in injected sequence) */ +#define ADC_JSQ3_0 ((uint32_t)0x00000400) /* Bit 0 */ +#define ADC_JSQ3_1 ((uint32_t)0x00000800) /* Bit 1 */ +#define ADC_JSQ3_2 ((uint32_t)0x00001000) /* Bit 2 */ +#define ADC_JSQ3_3 ((uint32_t)0x00002000) /* Bit 3 */ +#define ADC_JSQ3_4 ((uint32_t)0x00004000) /* Bit 4 */ + +#define ADC_JSQ4 ((uint32_t)0x000F8000) /* JSQ4[4:0] bits (4th conversion in injected sequence) */ +#define ADC_JSQ4_0 ((uint32_t)0x00008000) /* Bit 0 */ +#define ADC_JSQ4_1 ((uint32_t)0x00010000) /* Bit 1 */ +#define ADC_JSQ4_2 ((uint32_t)0x00020000) /* Bit 2 */ +#define ADC_JSQ4_3 ((uint32_t)0x00040000) /* Bit 3 */ +#define ADC_JSQ4_4 ((uint32_t)0x00080000) /* Bit 4 */ + +#define ADC_JL ((uint32_t)0x00300000) /* JL[1:0] bits (Injected Sequence length) */ +#define ADC_JL_0 ((uint32_t)0x00100000) /* Bit 0 */ +#define ADC_JL_1 ((uint32_t)0x00200000) /* Bit 1 */ + +/******************* Bit definition for ADC_IDATAR1 register *******************/ +#define ADC_IDATAR1_JDATA ((uint16_t)0xFFFF) /* Injected data */ + +/******************* Bit definition for ADC_IDATAR2 register *******************/ +#define ADC_IDATAR2_JDATA ((uint16_t)0xFFFF) /* Injected data */ + +/******************* Bit definition for ADC_IDATAR3 register *******************/ +#define ADC_IDATAR3_JDATA ((uint16_t)0xFFFF) /* Injected data */ + +/******************* Bit definition for ADC_IDATAR4 register *******************/ +#define ADC_IDATAR4_JDATA ((uint16_t)0xFFFF) /* Injected data */ + +/******************** Bit definition for ADC_RDATAR register ********************/ +#define ADC_RDATAR_DATA ((uint32_t)0x0000FFFF) /* Regular data */ +#define ADC_RDATAR_ADC2DATA ((uint32_t)0xFFFF0000) /* ADC2 data */ + +/******************************************************************************/ +/* Backup registers */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DATAR1 register ********************/ +#define BKP_DATAR1_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR2 register ********************/ +#define BKP_DATAR2_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR3 register ********************/ +#define BKP_DATAR3_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR4 register ********************/ +#define BKP_DATAR4_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR5 register ********************/ +#define BKP_DATAR5_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR6 register ********************/ +#define BKP_DATAR6_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR7 register ********************/ +#define BKP_DATAR7_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR8 register ********************/ +#define BKP_DATAR8_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR9 register ********************/ +#define BKP_DATAR9_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR10 register *******************/ +#define BKP_DATAR10_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR11 register *******************/ +#define BKP_DATAR11_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR12 register *******************/ +#define BKP_DATAR12_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR13 register *******************/ +#define BKP_DATAR13_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR14 register *******************/ +#define BKP_DATAR14_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR15 register *******************/ +#define BKP_DATAR15_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR16 register *******************/ +#define BKP_DATAR16_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR17 register *******************/ +#define BKP_DATAR17_D ((uint16_t)0xFFFF) /* Backup data */ + +/****************** Bit definition for BKP_DATAR18 register ********************/ +#define BKP_DATAR18_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR19 register *******************/ +#define BKP_DATAR19_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR20 register *******************/ +#define BKP_DATAR20_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR21 register *******************/ +#define BKP_DATAR21_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR22 register *******************/ +#define BKP_DATAR22_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR23 register *******************/ +#define BKP_DATAR23_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR24 register *******************/ +#define BKP_DATAR24_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR25 register *******************/ +#define BKP_DATAR25_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR26 register *******************/ +#define BKP_DATAR26_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR27 register *******************/ +#define BKP_DATAR27_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR28 register *******************/ +#define BKP_DATAR28_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR29 register *******************/ +#define BKP_DATAR29_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR30 register *******************/ +#define BKP_DATAR30_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR31 register *******************/ +#define BKP_DATAR31_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR32 register *******************/ +#define BKP_DATAR32_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR33 register *******************/ +#define BKP_DATAR33_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR34 register *******************/ +#define BKP_DATAR34_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR35 register *******************/ +#define BKP_DATAR35_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR36 register *******************/ +#define BKP_DATAR36_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR37 register *******************/ +#define BKP_DATAR37_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR38 register *******************/ +#define BKP_DATAR38_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR39 register *******************/ +#define BKP_DATAR39_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR40 register *******************/ +#define BKP_DATAR40_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR41 register *******************/ +#define BKP_DATAR41_D ((uint16_t)0xFFFF) /* Backup data */ + +/******************* Bit definition for BKP_DATAR42 register *******************/ +#define BKP_DATAR42_D ((uint16_t)0xFFFF) /* Backup data */ + +/****************** Bit definition for BKP_OCTLR register *******************/ +#define BKP_CAL ((uint16_t)0x007F) /* Calibration value */ +#define BKP_CCO ((uint16_t)0x0080) /* Calibration Clock Output */ +#define BKP_ASOE ((uint16_t)0x0100) /* Alarm or Second Output Enable */ +#define BKP_ASOS ((uint16_t)0x0200) /* Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_TPCTLR register ********************/ +#define BKP_TPE ((uint8_t)0x01) /* TAMPER pin enable */ +#define BKP_TPAL ((uint8_t)0x02) /* TAMPER pin active level */ + +/******************* Bit definition for BKP_TPCSR register ********************/ +#define BKP_CTE ((uint16_t)0x0001) /* Clear Tamper event */ +#define BKP_CTI ((uint16_t)0x0002) /* Clear Tamper Interrupt */ +#define BKP_TPIE ((uint16_t)0x0004) /* TAMPER Pin interrupt enable */ +#define BKP_TEF ((uint16_t)0x0100) /* Tamper Event Flag */ +#define BKP_TIF ((uint16_t)0x0200) /* Tamper Interrupt Flag */ + +/******************************************************************************/ +/* Controller Area Network */ +/******************************************************************************/ + +/******************* Bit definition for CAN_CTLR register ********************/ +#define CAN_CTLR_INRQ ((uint16_t)0x0001) /* Initialization Request */ +#define CAN_CTLR_SLEEP ((uint16_t)0x0002) /* Sleep Mode Request */ +#define CAN_CTLR_TXFP ((uint16_t)0x0004) /* Transmit FIFO Priority */ +#define CAN_CTLR_RFLM ((uint16_t)0x0008) /* Receive FIFO Locked Mode */ +#define CAN_CTLR_NART ((uint16_t)0x0010) /* No Automatic Retransmission */ +#define CAN_CTLR_AWUM ((uint16_t)0x0020) /* Automatic Wakeup Mode */ +#define CAN_CTLR_ABOM ((uint16_t)0x0040) /* Automatic Bus-Off Management */ +#define CAN_CTLR_TTCM ((uint16_t)0x0080) /* Time Triggered Communication Mode */ +#define CAN_CTLR_RESET ((uint16_t)0x8000) /* CAN software master reset */ + +/******************* Bit definition for CAN_STATR register ********************/ +#define CAN_STATR_INAK ((uint16_t)0x0001) /* Initialization Acknowledge */ +#define CAN_STATR_SLAK ((uint16_t)0x0002) /* Sleep Acknowledge */ +#define CAN_STATR_ERRI ((uint16_t)0x0004) /* Error Interrupt */ +#define CAN_STATR_WKUI ((uint16_t)0x0008) /* Wakeup Interrupt */ +#define CAN_STATR_SLAKI ((uint16_t)0x0010) /* Sleep Acknowledge Interrupt */ +#define CAN_STATR_TXM ((uint16_t)0x0100) /* Transmit Mode */ +#define CAN_STATR_RXM ((uint16_t)0x0200) /* Receive Mode */ +#define CAN_STATR_SAMP ((uint16_t)0x0400) /* Last Sample Point */ +#define CAN_STATR_RX ((uint16_t)0x0800) /* CAN Rx Signal */ + +/******************* Bit definition for CAN_TSTATR register ********************/ +#define CAN_TSTATR_RQCP0 ((uint32_t)0x00000001) /* Request Completed Mailbox0 */ +#define CAN_TSTATR_TXOK0 ((uint32_t)0x00000002) /* Transmission OK of Mailbox0 */ +#define CAN_TSTATR_ALST0 ((uint32_t)0x00000004) /* Arbitration Lost for Mailbox0 */ +#define CAN_TSTATR_TERR0 ((uint32_t)0x00000008) /* Transmission Error of Mailbox0 */ +#define CAN_TSTATR_ABRQ0 ((uint32_t)0x00000080) /* Abort Request for Mailbox0 */ +#define CAN_TSTATR_RQCP1 ((uint32_t)0x00000100) /* Request Completed Mailbox1 */ +#define CAN_TSTATR_TXOK1 ((uint32_t)0x00000200) /* Transmission OK of Mailbox1 */ +#define CAN_TSTATR_ALST1 ((uint32_t)0x00000400) /* Arbitration Lost for Mailbox1 */ +#define CAN_TSTATR_TERR1 ((uint32_t)0x00000800) /* Transmission Error of Mailbox1 */ +#define CAN_TSTATR_ABRQ1 ((uint32_t)0x00008000) /* Abort Request for Mailbox 1 */ +#define CAN_TSTATR_RQCP2 ((uint32_t)0x00010000) /* Request Completed Mailbox2 */ +#define CAN_TSTATR_TXOK2 ((uint32_t)0x00020000) /* Transmission OK of Mailbox 2 */ +#define CAN_TSTATR_ALST2 ((uint32_t)0x00040000) /* Arbitration Lost for mailbox 2 */ +#define CAN_TSTATR_TERR2 ((uint32_t)0x00080000) /* Transmission Error of Mailbox 2 */ +#define CAN_TSTATR_ABRQ2 ((uint32_t)0x00800000) /* Abort Request for Mailbox 2 */ +#define CAN_TSTATR_CODE ((uint32_t)0x03000000) /* Mailbox Code */ + +#define CAN_TSTATR_TME ((uint32_t)0x1C000000) /* TME[2:0] bits */ +#define CAN_TSTATR_TME0 ((uint32_t)0x04000000) /* Transmit Mailbox 0 Empty */ +#define CAN_TSTATR_TME1 ((uint32_t)0x08000000) /* Transmit Mailbox 1 Empty */ +#define CAN_TSTATR_TME2 ((uint32_t)0x10000000) /* Transmit Mailbox 2 Empty */ + +#define CAN_TSTATR_LOW ((uint32_t)0xE0000000) /* LOW[2:0] bits */ +#define CAN_TSTATR_LOW0 ((uint32_t)0x20000000) /* Lowest Priority Flag for Mailbox 0 */ +#define CAN_TSTATR_LOW1 ((uint32_t)0x40000000) /* Lowest Priority Flag for Mailbox 1 */ +#define CAN_TSTATR_LOW2 ((uint32_t)0x80000000) /* Lowest Priority Flag for Mailbox 2 */ + +/******************* Bit definition for CAN_RFIFO0 register *******************/ +#define CAN_RFIFO0_FMP0 ((uint8_t)0x03) /* FIFO 0 Message Pending */ +#define CAN_RFIFO0_FULL0 ((uint8_t)0x08) /* FIFO 0 Full */ +#define CAN_RFIFO0_FOVR0 ((uint8_t)0x10) /* FIFO 0 Overrun */ +#define CAN_RFIFO0_RFOM0 ((uint8_t)0x20) /* Release FIFO 0 Output Mailbox */ + +/******************* Bit definition for CAN_RFIFO1 register *******************/ +#define CAN_RFIFO1_FMP1 ((uint8_t)0x03) /* FIFO 1 Message Pending */ +#define CAN_RFIFO1_FULL1 ((uint8_t)0x08) /* FIFO 1 Full */ +#define CAN_RFIFO1_FOVR1 ((uint8_t)0x10) /* FIFO 1 Overrun */ +#define CAN_RFIFO1_RFOM1 ((uint8_t)0x20) /* Release FIFO 1 Output Mailbox */ + +/******************** Bit definition for CAN_INTENR register *******************/ +#define CAN_INTENR_TMEIE ((uint32_t)0x00000001) /* Transmit Mailbox Empty Interrupt Enable */ +#define CAN_INTENR_FMPIE0 ((uint32_t)0x00000002) /* FIFO Message Pending Interrupt Enable */ +#define CAN_INTENR_FFIE0 ((uint32_t)0x00000004) /* FIFO Full Interrupt Enable */ +#define CAN_INTENR_FOVIE0 ((uint32_t)0x00000008) /* FIFO Overrun Interrupt Enable */ +#define CAN_INTENR_FMPIE1 ((uint32_t)0x00000010) /* FIFO Message Pending Interrupt Enable */ +#define CAN_INTENR_FFIE1 ((uint32_t)0x00000020) /* FIFO Full Interrupt Enable */ +#define CAN_INTENR_FOVIE1 ((uint32_t)0x00000040) /* FIFO Overrun Interrupt Enable */ +#define CAN_INTENR_EWGIE ((uint32_t)0x00000100) /* Error Warning Interrupt Enable */ +#define CAN_INTENR_EPVIE ((uint32_t)0x00000200) /* Error Passive Interrupt Enable */ +#define CAN_INTENR_BOFIE ((uint32_t)0x00000400) /* Bus-Off Interrupt Enable */ +#define CAN_INTENR_LECIE ((uint32_t)0x00000800) /* Last Error Code Interrupt Enable */ +#define CAN_INTENR_ERRIE ((uint32_t)0x00008000) /* Error Interrupt Enable */ +#define CAN_INTENR_WKUIE ((uint32_t)0x00010000) /* Wakeup Interrupt Enable */ +#define CAN_INTENR_SLKIE ((uint32_t)0x00020000) /* Sleep Interrupt Enable */ + +/******************** Bit definition for CAN_ERRSR register *******************/ +#define CAN_ERRSR_EWGF ((uint32_t)0x00000001) /* Error Warning Flag */ +#define CAN_ERRSR_EPVF ((uint32_t)0x00000002) /* Error Passive Flag */ +#define CAN_ERRSR_BOFF ((uint32_t)0x00000004) /* Bus-Off Flag */ + +#define CAN_ERRSR_LEC ((uint32_t)0x00000070) /* LEC[2:0] bits (Last Error Code) */ +#define CAN_ERRSR_LEC_0 ((uint32_t)0x00000010) /* Bit 0 */ +#define CAN_ERRSR_LEC_1 ((uint32_t)0x00000020) /* Bit 1 */ +#define CAN_ERRSR_LEC_2 ((uint32_t)0x00000040) /* Bit 2 */ + +#define CAN_ERRSR_TEC ((uint32_t)0x00FF0000) /* Least significant byte of the 9-bit Transmit Error Counter */ +#define CAN_ERRSR_REC ((uint32_t)0xFF000000) /* Receive Error Counter */ + +/******************* Bit definition for CAN_BTIMR register ********************/ +#define CAN_BTIMR_BRP ((uint32_t)0x000003FF) /* Baud Rate Prescaler */ +#define CAN_BTIMR_TS1 ((uint32_t)0x000F0000) /* Time Segment 1 */ +#define CAN_BTIMR_TS2 ((uint32_t)0x00700000) /* Time Segment 2 */ +#define CAN_BTIMR_SJW ((uint32_t)0x03000000) /* Resynchronization Jump Width */ +#define CAN_BTIMR_LBKM ((uint32_t)0x40000000) /* Loop Back Mode (Debug) */ +#define CAN_BTIMR_SILM ((uint32_t)0x80000000) /* Silent Mode */ + +/****************** Bit definition for CAN_TXMI0R register ********************/ +#define CAN_TXMI0R_TXRQ ((uint32_t)0x00000001) /* Transmit Mailbox Request */ +#define CAN_TXMI0R_RTR ((uint32_t)0x00000002) /* Remote Transmission Request */ +#define CAN_TXMI0R_IDE ((uint32_t)0x00000004) /* Identifier Extension */ +#define CAN_TXMI0R_EXID ((uint32_t)0x001FFFF8) /* Extended Identifier */ +#define CAN_TXMI0R_STID ((uint32_t)0xFFE00000) /* Standard Identifier or Extended Identifier */ + +/****************** Bit definition for CAN_TXMDT0R register *******************/ +#define CAN_TXMDT0R_DLC ((uint32_t)0x0000000F) /* Data Length Code */ +#define CAN_TXMDT0R_TGT ((uint32_t)0x00000100) /* Transmit Global Time */ +#define CAN_TXMDT0R_TIME ((uint32_t)0xFFFF0000) /* Message Time Stamp */ + +/****************** Bit definition for CAN_TXMDL0R register *******************/ +#define CAN_TXMDL0R_DATA0 ((uint32_t)0x000000FF) /* Data byte 0 */ +#define CAN_TXMDL0R_DATA1 ((uint32_t)0x0000FF00) /* Data byte 1 */ +#define CAN_TXMDL0R_DATA2 ((uint32_t)0x00FF0000) /* Data byte 2 */ +#define CAN_TXMDL0R_DATA3 ((uint32_t)0xFF000000) /* Data byte 3 */ + +/****************** Bit definition for CAN_TXMDH0R register *******************/ +#define CAN_TXMDH0R_DATA4 ((uint32_t)0x000000FF) /* Data byte 4 */ +#define CAN_TXMDH0R_DATA5 ((uint32_t)0x0000FF00) /* Data byte 5 */ +#define CAN_TXMDH0R_DATA6 ((uint32_t)0x00FF0000) /* Data byte 6 */ +#define CAN_TXMDH0R_DATA7 ((uint32_t)0xFF000000) /* Data byte 7 */ + +/******************* Bit definition for CAN_TXMI1R register *******************/ +#define CAN_TXMI1R_TXRQ ((uint32_t)0x00000001) /* Transmit Mailbox Request */ +#define CAN_TXMI1R_RTR ((uint32_t)0x00000002) /* Remote Transmission Request */ +#define CAN_TXMI1R_IDE ((uint32_t)0x00000004) /* Identifier Extension */ +#define CAN_TXMI1R_EXID ((uint32_t)0x001FFFF8) /* Extended Identifier */ +#define CAN_TXMI1R_STID ((uint32_t)0xFFE00000) /* Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_TXMDT1R register ******************/ +#define CAN_TXMDT1R_DLC ((uint32_t)0x0000000F) /* Data Length Code */ +#define CAN_TXMDT1R_TGT ((uint32_t)0x00000100) /* Transmit Global Time */ +#define CAN_TXMDT1R_TIME ((uint32_t)0xFFFF0000) /* Message Time Stamp */ + +/******************* Bit definition for CAN_TXMDL1R register ******************/ +#define CAN_TXMDL1R_DATA0 ((uint32_t)0x000000FF) /* Data byte 0 */ +#define CAN_TXMDL1R_DATA1 ((uint32_t)0x0000FF00) /* Data byte 1 */ +#define CAN_TXMDL1R_DATA2 ((uint32_t)0x00FF0000) /* Data byte 2 */ +#define CAN_TXMDL1R_DATA3 ((uint32_t)0xFF000000) /* Data byte 3 */ + +/******************* Bit definition for CAN_TXMDH1R register ******************/ +#define CAN_TXMDH1R_DATA4 ((uint32_t)0x000000FF) /* Data byte 4 */ +#define CAN_TXMDH1R_DATA5 ((uint32_t)0x0000FF00) /* Data byte 5 */ +#define CAN_TXMDH1R_DATA6 ((uint32_t)0x00FF0000) /* Data byte 6 */ +#define CAN_TXMDH1R_DATA7 ((uint32_t)0xFF000000) /* Data byte 7 */ + +/******************* Bit definition for CAN_TXMI2R register *******************/ +#define CAN_TXMI2R_TXRQ ((uint32_t)0x00000001) /* Transmit Mailbox Request */ +#define CAN_TXMI2R_RTR ((uint32_t)0x00000002) /* Remote Transmission Request */ +#define CAN_TXMI2R_IDE ((uint32_t)0x00000004) /* Identifier Extension */ +#define CAN_TXMI2R_EXID ((uint32_t)0x001FFFF8) /* Extended identifier */ +#define CAN_TXMI2R_STID ((uint32_t)0xFFE00000) /* Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_TXMDT2R register ******************/ +#define CAN_TXMDT2R_DLC ((uint32_t)0x0000000F) /* Data Length Code */ +#define CAN_TXMDT2R_TGT ((uint32_t)0x00000100) /* Transmit Global Time */ +#define CAN_TXMDT2R_TIME ((uint32_t)0xFFFF0000) /* Message Time Stamp */ + +/******************* Bit definition for CAN_TXMDL2R register ******************/ +#define CAN_TXMDL2R_DATA0 ((uint32_t)0x000000FF) /* Data byte 0 */ +#define CAN_TXMDL2R_DATA1 ((uint32_t)0x0000FF00) /* Data byte 1 */ +#define CAN_TXMDL2R_DATA2 ((uint32_t)0x00FF0000) /* Data byte 2 */ +#define CAN_TXMDL2R_DATA3 ((uint32_t)0xFF000000) /* Data byte 3 */ + +/******************* Bit definition for CAN_TXMDH2R register ******************/ +#define CAN_TXMDH2R_DATA4 ((uint32_t)0x000000FF) /* Data byte 4 */ +#define CAN_TXMDH2R_DATA5 ((uint32_t)0x0000FF00) /* Data byte 5 */ +#define CAN_TXMDH2R_DATA6 ((uint32_t)0x00FF0000) /* Data byte 6 */ +#define CAN_TXMDH2R_DATA7 ((uint32_t)0xFF000000) /* Data byte 7 */ + +/******************* Bit definition for CAN_RXMI0R register *******************/ +#define CAN_RXMI0R_RTR ((uint32_t)0x00000002) /* Remote Transmission Request */ +#define CAN_RXMI0R_IDE ((uint32_t)0x00000004) /* Identifier Extension */ +#define CAN_RXMI0R_EXID ((uint32_t)0x001FFFF8) /* Extended Identifier */ +#define CAN_RXMI0R_STID ((uint32_t)0xFFE00000) /* Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_RXMDT0R register ******************/ +#define CAN_RXMDT0R_DLC ((uint32_t)0x0000000F) /* Data Length Code */ +#define CAN_RXMDT0R_FMI ((uint32_t)0x0000FF00) /* Filter Match Index */ +#define CAN_RXMDT0R_TIME ((uint32_t)0xFFFF0000) /* Message Time Stamp */ + +/******************* Bit definition for CAN_RXMDL0R register ******************/ +#define CAN_RXMDL0R_DATA0 ((uint32_t)0x000000FF) /* Data byte 0 */ +#define CAN_RXMDL0R_DATA1 ((uint32_t)0x0000FF00) /* Data byte 1 */ +#define CAN_RXMDL0R_DATA2 ((uint32_t)0x00FF0000) /* Data byte 2 */ +#define CAN_RXMDL0R_DATA3 ((uint32_t)0xFF000000) /* Data byte 3 */ + +/******************* Bit definition for CAN_RXMDH0R register ******************/ +#define CAN_RXMDH0R_DATA4 ((uint32_t)0x000000FF) /* Data byte 4 */ +#define CAN_RXMDH0R_DATA5 ((uint32_t)0x0000FF00) /* Data byte 5 */ +#define CAN_RXMDH0R_DATA6 ((uint32_t)0x00FF0000) /* Data byte 6 */ +#define CAN_RXMDH0R_DATA7 ((uint32_t)0xFF000000) /* Data byte 7 */ + +/******************* Bit definition for CAN_RXMI1R register *******************/ +#define CAN_RXMI1R_RTR ((uint32_t)0x00000002) /* Remote Transmission Request */ +#define CAN_RXMI1R_IDE ((uint32_t)0x00000004) /* Identifier Extension */ +#define CAN_RXMI1R_EXID ((uint32_t)0x001FFFF8) /* Extended identifier */ +#define CAN_RXMI1R_STID ((uint32_t)0xFFE00000) /* Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_RXMDT1R register ******************/ +#define CAN_RXMDT1R_DLC ((uint32_t)0x0000000F) /* Data Length Code */ +#define CAN_RXMDT1R_FMI ((uint32_t)0x0000FF00) /* Filter Match Index */ +#define CAN_RXMDT1R_TIME ((uint32_t)0xFFFF0000) /* Message Time Stamp */ + +/******************* Bit definition for CAN_RXMDL1R register ******************/ +#define CAN_RXMDL1R_DATA0 ((uint32_t)0x000000FF) /* Data byte 0 */ +#define CAN_RXMDL1R_DATA1 ((uint32_t)0x0000FF00) /* Data byte 1 */ +#define CAN_RXMDL1R_DATA2 ((uint32_t)0x00FF0000) /* Data byte 2 */ +#define CAN_RXMDL1R_DATA3 ((uint32_t)0xFF000000) /* Data byte 3 */ + +/******************* Bit definition for CAN_RXMDH1R register ******************/ +#define CAN_RXMDH1R_DATA4 ((uint32_t)0x000000FF) /* Data byte 4 */ +#define CAN_RXMDH1R_DATA5 ((uint32_t)0x0000FF00) /* Data byte 5 */ +#define CAN_RXMDH1R_DATA6 ((uint32_t)0x00FF0000) /* Data byte 6 */ +#define CAN_RXMDH1R_DATA7 ((uint32_t)0xFF000000) /* Data byte 7 */ + +/******************* Bit definition for CAN_FCTLR register ********************/ +#define CAN_FCTLR_FINIT ((uint8_t)0x01) /* Filter Init Mode */ + +/******************* Bit definition for CAN_FMCFGR register *******************/ +#define CAN_FMCFGR_FBM ((uint16_t)0x3FFF) /* Filter Mode */ +#define CAN_FMCFGR_FBM0 ((uint16_t)0x0001) /* Filter Init Mode bit 0 */ +#define CAN_FMCFGR_FBM1 ((uint16_t)0x0002) /* Filter Init Mode bit 1 */ +#define CAN_FMCFGR_FBM2 ((uint16_t)0x0004) /* Filter Init Mode bit 2 */ +#define CAN_FMCFGR_FBM3 ((uint16_t)0x0008) /* Filter Init Mode bit 3 */ +#define CAN_FMCFGR_FBM4 ((uint16_t)0x0010) /* Filter Init Mode bit 4 */ +#define CAN_FMCFGR_FBM5 ((uint16_t)0x0020) /* Filter Init Mode bit 5 */ +#define CAN_FMCFGR_FBM6 ((uint16_t)0x0040) /* Filter Init Mode bit 6 */ +#define CAN_FMCFGR_FBM7 ((uint16_t)0x0080) /* Filter Init Mode bit 7 */ +#define CAN_FMCFGR_FBM8 ((uint16_t)0x0100) /* Filter Init Mode bit 8 */ +#define CAN_FMCFGR_FBM9 ((uint16_t)0x0200) /* Filter Init Mode bit 9 */ +#define CAN_FMCFGR_FBM10 ((uint16_t)0x0400) /* Filter Init Mode bit 10 */ +#define CAN_FMCFGR_FBM11 ((uint16_t)0x0800) /* Filter Init Mode bit 11 */ +#define CAN_FMCFGR_FBM12 ((uint16_t)0x1000) /* Filter Init Mode bit 12 */ +#define CAN_FMCFGR_FBM13 ((uint16_t)0x2000) /* Filter Init Mode bit 13 */ + +/******************* Bit definition for CAN_FSCFGR register *******************/ +#define CAN_FSCFGR_FSC ((uint16_t)0x3FFF) /* Filter Scale Configuration */ +#define CAN_FSCFGR_FSC0 ((uint16_t)0x0001) /* Filter Scale Configuration bit 0 */ +#define CAN_FSCFGR_FSC1 ((uint16_t)0x0002) /* Filter Scale Configuration bit 1 */ +#define CAN_FSCFGR_FSC2 ((uint16_t)0x0004) /* Filter Scale Configuration bit 2 */ +#define CAN_FSCFGR_FSC3 ((uint16_t)0x0008) /* Filter Scale Configuration bit 3 */ +#define CAN_FSCFGR_FSC4 ((uint16_t)0x0010) /* Filter Scale Configuration bit 4 */ +#define CAN_FSCFGR_FSC5 ((uint16_t)0x0020) /* Filter Scale Configuration bit 5 */ +#define CAN_FSCFGR_FSC6 ((uint16_t)0x0040) /* Filter Scale Configuration bit 6 */ +#define CAN_FSCFGR_FSC7 ((uint16_t)0x0080) /* Filter Scale Configuration bit 7 */ +#define CAN_FSCFGR_FSC8 ((uint16_t)0x0100) /* Filter Scale Configuration bit 8 */ +#define CAN_FSCFGR_FSC9 ((uint16_t)0x0200) /* Filter Scale Configuration bit 9 */ +#define CAN_FSCFGR_FSC10 ((uint16_t)0x0400) /* Filter Scale Configuration bit 10 */ +#define CAN_FSCFGR_FSC11 ((uint16_t)0x0800) /* Filter Scale Configuration bit 11 */ +#define CAN_FSCFGR_FSC12 ((uint16_t)0x1000) /* Filter Scale Configuration bit 12 */ +#define CAN_FSCFGR_FSC13 ((uint16_t)0x2000) /* Filter Scale Configuration bit 13 */ + +/****************** Bit definition for CAN_FAFIFOR register *******************/ +#define CAN_FAFIFOR_FFA ((uint16_t)0x3FFF) /* Filter FIFO Assignment */ +#define CAN_FAFIFOR_FFA0 ((uint16_t)0x0001) /* Filter FIFO Assignment for Filter 0 */ +#define CAN_FAFIFOR_FFA1 ((uint16_t)0x0002) /* Filter FIFO Assignment for Filter 1 */ +#define CAN_FAFIFOR_FFA2 ((uint16_t)0x0004) /* Filter FIFO Assignment for Filter 2 */ +#define CAN_FAFIFOR_FFA3 ((uint16_t)0x0008) /* Filter FIFO Assignment for Filter 3 */ +#define CAN_FAFIFOR_FFA4 ((uint16_t)0x0010) /* Filter FIFO Assignment for Filter 4 */ +#define CAN_FAFIFOR_FFA5 ((uint16_t)0x0020) /* Filter FIFO Assignment for Filter 5 */ +#define CAN_FAFIFOR_FFA6 ((uint16_t)0x0040) /* Filter FIFO Assignment for Filter 6 */ +#define CAN_FAFIFOR_FFA7 ((uint16_t)0x0080) /* Filter FIFO Assignment for Filter 7 */ +#define CAN_FAFIFOR_FFA8 ((uint16_t)0x0100) /* Filter FIFO Assignment for Filter 8 */ +#define CAN_FAFIFOR_FFA9 ((uint16_t)0x0200) /* Filter FIFO Assignment for Filter 9 */ +#define CAN_FAFIFOR_FFA10 ((uint16_t)0x0400) /* Filter FIFO Assignment for Filter 10 */ +#define CAN_FAFIFOR_FFA11 ((uint16_t)0x0800) /* Filter FIFO Assignment for Filter 11 */ +#define CAN_FAFIFOR_FFA12 ((uint16_t)0x1000) /* Filter FIFO Assignment for Filter 12 */ +#define CAN_FAFIFOR_FFA13 ((uint16_t)0x2000) /* Filter FIFO Assignment for Filter 13 */ + +/******************* Bit definition for CAN_FWR register *******************/ +#define CAN_FWR_FACT ((uint16_t)0x3FFF) /* Filter Active */ +#define CAN_FWR_FACT0 ((uint16_t)0x0001) /* Filter 0 Active */ +#define CAN_FWR_FACT1 ((uint16_t)0x0002) /* Filter 1 Active */ +#define CAN_FWR_FACT2 ((uint16_t)0x0004) /* Filter 2 Active */ +#define CAN_FWR_FACT3 ((uint16_t)0x0008) /* Filter 3 Active */ +#define CAN_FWR_FACT4 ((uint16_t)0x0010) /* Filter 4 Active */ +#define CAN_FWR_FACT5 ((uint16_t)0x0020) /* Filter 5 Active */ +#define CAN_FWR_FACT6 ((uint16_t)0x0040) /* Filter 6 Active */ +#define CAN_FWR_FACT7 ((uint16_t)0x0080) /* Filter 7 Active */ +#define CAN_FWR_FACT8 ((uint16_t)0x0100) /* Filter 8 Active */ +#define CAN_FWR_FACT9 ((uint16_t)0x0200) /* Filter 9 Active */ +#define CAN_FWR_FACT10 ((uint16_t)0x0400) /* Filter 10 Active */ +#define CAN_FWR_FACT11 ((uint16_t)0x0800) /* Filter 11 Active */ +#define CAN_FWR_FACT12 ((uint16_t)0x1000) /* Filter 12 Active */ +#define CAN_FWR_FACT13 ((uint16_t)0x2000) /* Filter 13 Active */ + +/******************* Bit definition for CAN_F0R1 register *******************/ +#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F1R1 register *******************/ +#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F2R1 register *******************/ +#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F3R1 register *******************/ +#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F4R1 register *******************/ +#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F5R1 register *******************/ +#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F6R1 register *******************/ +#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F7R1 register *******************/ +#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F8R1 register *******************/ +#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F9R1 register *******************/ +#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F10R1 register ******************/ +#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F11R1 register ******************/ +#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F12R1 register ******************/ +#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F13R1 register ******************/ +#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F0R2 register *******************/ +#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F1R2 register *******************/ +#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F2R2 register *******************/ +#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F3R2 register *******************/ +#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F4R2 register *******************/ +#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F5R2 register *******************/ +#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F6R2 register *******************/ +#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F7R2 register *******************/ +#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F8R2 register *******************/ +#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F9R2 register *******************/ +#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F10R2 register ******************/ +#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F11R2 register ******************/ +#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F12R2 register ******************/ +#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************* Bit definition for CAN_F13R2 register ******************/ +#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /* Filter bit 0 */ +#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /* Filter bit 1 */ +#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /* Filter bit 2 */ +#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /* Filter bit 3 */ +#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /* Filter bit 4 */ +#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /* Filter bit 5 */ +#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /* Filter bit 6 */ +#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /* Filter bit 7 */ +#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /* Filter bit 8 */ +#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /* Filter bit 9 */ +#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /* Filter bit 10 */ +#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /* Filter bit 11 */ +#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /* Filter bit 12 */ +#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /* Filter bit 13 */ +#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /* Filter bit 14 */ +#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /* Filter bit 15 */ +#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /* Filter bit 16 */ +#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /* Filter bit 17 */ +#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /* Filter bit 18 */ +#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /* Filter bit 19 */ +#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /* Filter bit 20 */ +#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /* Filter bit 21 */ +#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /* Filter bit 22 */ +#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /* Filter bit 23 */ +#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /* Filter bit 24 */ +#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /* Filter bit 25 */ +#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /* Filter bit 26 */ +#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /* Filter bit 27 */ +#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /* Filter bit 28 */ +#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /* Filter bit 29 */ +#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /* Filter bit 30 */ +#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /* Filter bit 31 */ + +/******************************************************************************/ +/* CRC Calculation Unit */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DATAR register *********************/ +#define CRC_DATAR_DR ((uint32_t)0xFFFFFFFF) /* Data register bits */ + +/******************* Bit definition for CRC_IDATAR register ********************/ +#define CRC_IDR_IDATAR ((uint8_t)0xFF) /* General-purpose 8-bit data register bits */ + +/******************** Bit definition for CRC_CTLR register ********************/ +#define CRC_CTLR_RESET ((uint8_t)0x01) /* RESET bit */ + +/******************************************************************************/ +/* DMA Controller */ +/******************************************************************************/ + +/******************* Bit definition for DMA_INTFR register ********************/ +#define DMA_GIF1 ((uint32_t)0x00000001) /* Channel 1 Global interrupt flag */ +#define DMA_TCIF1 ((uint32_t)0x00000002) /* Channel 1 Transfer Complete flag */ +#define DMA_HTIF1 ((uint32_t)0x00000004) /* Channel 1 Half Transfer flag */ +#define DMA_TEIF1 ((uint32_t)0x00000008) /* Channel 1 Transfer Error flag */ +#define DMA_GIF2 ((uint32_t)0x00000010) /* Channel 2 Global interrupt flag */ +#define DMA_TCIF2 ((uint32_t)0x00000020) /* Channel 2 Transfer Complete flag */ +#define DMA_HTIF2 ((uint32_t)0x00000040) /* Channel 2 Half Transfer flag */ +#define DMA_TEIF2 ((uint32_t)0x00000080) /* Channel 2 Transfer Error flag */ +#define DMA_GIF3 ((uint32_t)0x00000100) /* Channel 3 Global interrupt flag */ +#define DMA_TCIF3 ((uint32_t)0x00000200) /* Channel 3 Transfer Complete flag */ +#define DMA_HTIF3 ((uint32_t)0x00000400) /* Channel 3 Half Transfer flag */ +#define DMA_TEIF3 ((uint32_t)0x00000800) /* Channel 3 Transfer Error flag */ +#define DMA_GIF4 ((uint32_t)0x00001000) /* Channel 4 Global interrupt flag */ +#define DMA_TCIF4 ((uint32_t)0x00002000) /* Channel 4 Transfer Complete flag */ +#define DMA_HTIF4 ((uint32_t)0x00004000) /* Channel 4 Half Transfer flag */ +#define DMA_TEIF4 ((uint32_t)0x00008000) /* Channel 4 Transfer Error flag */ +#define DMA_GIF5 ((uint32_t)0x00010000) /* Channel 5 Global interrupt flag */ +#define DMA_TCIF5 ((uint32_t)0x00020000) /* Channel 5 Transfer Complete flag */ +#define DMA_HTIF5 ((uint32_t)0x00040000) /* Channel 5 Half Transfer flag */ +#define DMA_TEIF5 ((uint32_t)0x00080000) /* Channel 5 Transfer Error flag */ +#define DMA_GIF6 ((uint32_t)0x00100000) /* Channel 6 Global interrupt flag */ +#define DMA_TCIF6 ((uint32_t)0x00200000) /* Channel 6 Transfer Complete flag */ +#define DMA_HTIF6 ((uint32_t)0x00400000) /* Channel 6 Half Transfer flag */ +#define DMA_TEIF6 ((uint32_t)0x00800000) /* Channel 6 Transfer Error flag */ +#define DMA_GIF7 ((uint32_t)0x01000000) /* Channel 7 Global interrupt flag */ +#define DMA_TCIF7 ((uint32_t)0x02000000) /* Channel 7 Transfer Complete flag */ +#define DMA_HTIF7 ((uint32_t)0x04000000) /* Channel 7 Half Transfer flag */ +#define DMA_TEIF7 ((uint32_t)0x08000000) /* Channel 7 Transfer Error flag */ + +#define DMA_GIF8 ((uint32_t)0x00000001) /* Channel 8 Global interrupt flag */ +#define DMA_TCIF8 ((uint32_t)0x00000002) /* Channel 8 Transfer Complete flag */ +#define DMA_HTIF8 ((uint32_t)0x00000004) /* Channel 8 Half Transfer flag */ +#define DMA_TEIF8 ((uint32_t)0x00000008) /* Channel 8 Transfer Error flag */ +#define DMA_GIF9 ((uint32_t)0x00000010) /* Channel 9 Global interrupt flag */ +#define DMA_TCIF9 ((uint32_t)0x00000020) /* Channel 9 Transfer Complete flag */ +#define DMA_HTIF9 ((uint32_t)0x00000040) /* Channel 9 Half Transfer flag */ +#define DMA_TEIF9 ((uint32_t)0x00000080) /* Channel 9 Transfer Error flag */ +#define DMA_GIF10 ((uint32_t)0x00000100) /* Channel 10 Global interrupt flag */ +#define DMA_TCIF10 ((uint32_t)0x00000200) /* Channel 10 Transfer Complete flag */ +#define DMA_HTIF10 ((uint32_t)0x00000400) /* Channel 10 Half Transfer flag */ +#define DMA_TEIF10 ((uint32_t)0x00000800) /* Channel 10 Transfer Error flag */ +#define DMA_GIF11 ((uint32_t)0x00001000) /* Channel 11 Global interrupt flag */ +#define DMA_TCIF11 ((uint32_t)0x00002000) /* Channel 11 Transfer Complete flag */ +#define DMA_HTIF11 ((uint32_t)0x00004000) /* Channel 11 Half Transfer flag */ +#define DMA_TEIF11 ((uint32_t)0x00008000) /* Channel 11 Transfer Error flag */ + +/******************* Bit definition for DMA_INTFCR register *******************/ +#define DMA_CGIF1 ((uint32_t)0x00000001) /* Channel 1 Global interrupt clear */ +#define DMA_CTCIF1 ((uint32_t)0x00000002) /* Channel 1 Transfer Complete clear */ +#define DMA_CHTIF1 ((uint32_t)0x00000004) /* Channel 1 Half Transfer clear */ +#define DMA_CTEIF1 ((uint32_t)0x00000008) /* Channel 1 Transfer Error clear */ +#define DMA_CGIF2 ((uint32_t)0x00000010) /* Channel 2 Global interrupt clear */ +#define DMA_CTCIF2 ((uint32_t)0x00000020) /* Channel 2 Transfer Complete clear */ +#define DMA_CHTIF2 ((uint32_t)0x00000040) /* Channel 2 Half Transfer clear */ +#define DMA_CTEIF2 ((uint32_t)0x00000080) /* Channel 2 Transfer Error clear */ +#define DMA_CGIF3 ((uint32_t)0x00000100) /* Channel 3 Global interrupt clear */ +#define DMA_CTCIF3 ((uint32_t)0x00000200) /* Channel 3 Transfer Complete clear */ +#define DMA_CHTIF3 ((uint32_t)0x00000400) /* Channel 3 Half Transfer clear */ +#define DMA_CTEIF3 ((uint32_t)0x00000800) /* Channel 3 Transfer Error clear */ +#define DMA_CGIF4 ((uint32_t)0x00001000) /* Channel 4 Global interrupt clear */ +#define DMA_CTCIF4 ((uint32_t)0x00002000) /* Channel 4 Transfer Complete clear */ +#define DMA_CHTIF4 ((uint32_t)0x00004000) /* Channel 4 Half Transfer clear */ +#define DMA_CTEIF4 ((uint32_t)0x00008000) /* Channel 4 Transfer Error clear */ +#define DMA_CGIF5 ((uint32_t)0x00010000) /* Channel 5 Global interrupt clear */ +#define DMA_CTCIF5 ((uint32_t)0x00020000) /* Channel 5 Transfer Complete clear */ +#define DMA_CHTIF5 ((uint32_t)0x00040000) /* Channel 5 Half Transfer clear */ +#define DMA_CTEIF5 ((uint32_t)0x00080000) /* Channel 5 Transfer Error clear */ +#define DMA_CGIF6 ((uint32_t)0x00100000) /* Channel 6 Global interrupt clear */ +#define DMA_CTCIF6 ((uint32_t)0x00200000) /* Channel 6 Transfer Complete clear */ +#define DMA_CHTIF6 ((uint32_t)0x00400000) /* Channel 6 Half Transfer clear */ +#define DMA_CTEIF6 ((uint32_t)0x00800000) /* Channel 6 Transfer Error clear */ +#define DMA_CGIF7 ((uint32_t)0x01000000) /* Channel 7 Global interrupt clear */ +#define DMA_CTCIF7 ((uint32_t)0x02000000) /* Channel 7 Transfer Complete clear */ +#define DMA_CHTIF7 ((uint32_t)0x04000000) /* Channel 7 Half Transfer clear */ +#define DMA_CTEIF7 ((uint32_t)0x08000000) /* Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CFGR1 register *******************/ +#define DMA_CFGR1_EN ((uint16_t)0x0001) /* Channel enable*/ +#define DMA_CFGR1_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */ +#define DMA_CFGR1_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */ +#define DMA_CFGR1_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */ +#define DMA_CFGR1_DIR ((uint16_t)0x0010) /* Data transfer direction */ +#define DMA_CFGR1_CIRC ((uint16_t)0x0020) /* Circular mode */ +#define DMA_CFGR1_PINC ((uint16_t)0x0040) /* Peripheral increment mode */ +#define DMA_CFGR1_MINC ((uint16_t)0x0080) /* Memory increment mode */ + +#define DMA_CFGR1_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CFGR1_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */ +#define DMA_CFGR1_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */ + +#define DMA_CFGR1_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */ +#define DMA_CFGR1_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */ +#define DMA_CFGR1_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */ + +#define DMA_CFGR1_PL ((uint16_t)0x3000) /* PL[1:0] bits(Channel Priority level) */ +#define DMA_CFGR1_PL_0 ((uint16_t)0x1000) /* Bit 0 */ +#define DMA_CFGR1_PL_1 ((uint16_t)0x2000) /* Bit 1 */ + +#define DMA_CFGR1_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode */ + +/******************* Bit definition for DMA_CFGR2 register *******************/ +#define DMA_CFGR2_EN ((uint16_t)0x0001) /* Channel enable */ +#define DMA_CFGR2_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */ +#define DMA_CFGR2_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */ +#define DMA_CFGR2_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */ +#define DMA_CFGR2_DIR ((uint16_t)0x0010) /* Data transfer direction */ +#define DMA_CFGR2_CIRC ((uint16_t)0x0020) /* Circular mode */ +#define DMA_CFGR2_PINC ((uint16_t)0x0040) /* Peripheral increment mode */ +#define DMA_CFGR2_MINC ((uint16_t)0x0080) /* Memory increment mode */ + +#define DMA_CFGR2_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CFGR2_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */ +#define DMA_CFGR2_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */ + +#define DMA_CFGR2_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */ +#define DMA_CFGR2_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */ +#define DMA_CFGR2_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */ + +#define DMA_CFGR2_PL ((uint16_t)0x3000) /* PL[1:0] bits (Channel Priority level) */ +#define DMA_CFGR2_PL_0 ((uint16_t)0x1000) /* Bit 0 */ +#define DMA_CFGR2_PL_1 ((uint16_t)0x2000) /* Bit 1 */ + +#define DMA_CFGR2_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode */ + +/******************* Bit definition for DMA_CFGR3 register *******************/ +#define DMA_CFGR3_EN ((uint16_t)0x0001) /* Channel enable */ +#define DMA_CFGR3_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */ +#define DMA_CFGR3_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */ +#define DMA_CFGR3_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */ +#define DMA_CFGR3_DIR ((uint16_t)0x0010) /* Data transfer direction */ +#define DMA_CFGR3_CIRC ((uint16_t)0x0020) /* Circular mode */ +#define DMA_CFGR3_PINC ((uint16_t)0x0040) /* Peripheral increment mode */ +#define DMA_CFGR3_MINC ((uint16_t)0x0080) /* Memory increment mode */ + +#define DMA_CFGR3_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CFGR3_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */ +#define DMA_CFGR3_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */ + +#define DMA_CFGR3_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */ +#define DMA_CFGR3_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */ +#define DMA_CFGR3_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */ + +#define DMA_CFGR3_PL ((uint16_t)0x3000) /* PL[1:0] bits (Channel Priority level) */ +#define DMA_CFGR3_PL_0 ((uint16_t)0x1000) /* Bit 0 */ +#define DMA_CFGR3_PL_1 ((uint16_t)0x2000) /* Bit 1 */ + +#define DMA_CFGR3_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode */ + +/******************* Bit definition for DMA_CFG4 register *******************/ +#define DMA_CFG4_EN ((uint16_t)0x0001) /* Channel enable */ +#define DMA_CFG4_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */ +#define DMA_CFG4_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */ +#define DMA_CFG4_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */ +#define DMA_CFG4_DIR ((uint16_t)0x0010) /* Data transfer direction */ +#define DMA_CFG4_CIRC ((uint16_t)0x0020) /* Circular mode */ +#define DMA_CFG4_PINC ((uint16_t)0x0040) /* Peripheral increment mode */ +#define DMA_CFG4_MINC ((uint16_t)0x0080) /* Memory increment mode */ + +#define DMA_CFG4_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CFG4_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */ +#define DMA_CFG4_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */ + +#define DMA_CFG4_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */ +#define DMA_CFG4_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */ +#define DMA_CFG4_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */ + +#define DMA_CFG4_PL ((uint16_t)0x3000) /* PL[1:0] bits (Channel Priority level) */ +#define DMA_CFG4_PL_0 ((uint16_t)0x1000) /* Bit 0 */ +#define DMA_CFG4_PL_1 ((uint16_t)0x2000) /* Bit 1 */ + +#define DMA_CFG4_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode */ + +/****************** Bit definition for DMA_CFG5 register *******************/ +#define DMA_CFG5_EN ((uint16_t)0x0001) /* Channel enable */ +#define DMA_CFG5_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */ +#define DMA_CFG5_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */ +#define DMA_CFG5_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */ +#define DMA_CFG5_DIR ((uint16_t)0x0010) /* Data transfer direction */ +#define DMA_CFG5_CIRC ((uint16_t)0x0020) /* Circular mode */ +#define DMA_CFG5_PINC ((uint16_t)0x0040) /* Peripheral increment mode */ +#define DMA_CFG5_MINC ((uint16_t)0x0080) /* Memory increment mode */ + +#define DMA_CFG5_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CFG5_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */ +#define DMA_CFG5_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */ + +#define DMA_CFG5_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */ +#define DMA_CFG5_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */ +#define DMA_CFG5_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */ + +#define DMA_CFG5_PL ((uint16_t)0x3000) /* PL[1:0] bits (Channel Priority level) */ +#define DMA_CFG5_PL_0 ((uint16_t)0x1000) /* Bit 0 */ +#define DMA_CFG5_PL_1 ((uint16_t)0x2000) /* Bit 1 */ + +#define DMA_CFG5_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode enable */ + +/******************* Bit definition for DMA_CFG6 register *******************/ +#define DMA_CFG6_EN ((uint16_t)0x0001) /* Channel enable */ +#define DMA_CFG6_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */ +#define DMA_CFG6_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */ +#define DMA_CFG6_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */ +#define DMA_CFG6_DIR ((uint16_t)0x0010) /* Data transfer direction */ +#define DMA_CFG6_CIRC ((uint16_t)0x0020) /* Circular mode */ +#define DMA_CFG6_PINC ((uint16_t)0x0040) /* Peripheral increment mode */ +#define DMA_CFG6_MINC ((uint16_t)0x0080) /* Memory increment mode */ + +#define DMA_CFG6_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CFG6_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */ +#define DMA_CFG6_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */ + +#define DMA_CFG6_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */ +#define DMA_CFG6_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */ +#define DMA_CFG6_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */ + +#define DMA_CFG6_PL ((uint16_t)0x3000) /* PL[1:0] bits (Channel Priority level) */ +#define DMA_CFG6_PL_0 ((uint16_t)0x1000) /* Bit 0 */ +#define DMA_CFG6_PL_1 ((uint16_t)0x2000) /* Bit 1 */ + +#define DMA_CFG6_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode */ + +/******************* Bit definition for DMA_CFG7 register *******************/ +#define DMA_CFG7_EN ((uint16_t)0x0001) /* Channel enable */ +#define DMA_CFG7_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */ +#define DMA_CFG7_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */ +#define DMA_CFG7_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */ +#define DMA_CFG7_DIR ((uint16_t)0x0010) /* Data transfer direction */ +#define DMA_CFG7_CIRC ((uint16_t)0x0020) /* Circular mode */ +#define DMA_CFG7_PINC ((uint16_t)0x0040) /* Peripheral increment mode */ +#define DMA_CFG7_MINC ((uint16_t)0x0080) /* Memory increment mode */ + +#define DMA_CFG7_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CFG7_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */ +#define DMA_CFG7_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */ + +#define DMA_CFG7_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */ +#define DMA_CFG7_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */ +#define DMA_CFG7_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */ + +#define DMA_CFG7_PL ((uint16_t)0x3000) /* PL[1:0] bits (Channel Priority level) */ +#define DMA_CFG7_PL_0 ((uint16_t)0x1000) /* Bit 0 */ +#define DMA_CFG7_PL_1 ((uint16_t)0x2000) /* Bit 1 */ + +#define DMA_CFG7_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode enable */ + +/****************** Bit definition for DMA_CNTR1 register ******************/ +#define DMA_CNTR1_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */ + +/****************** Bit definition for DMA_CNTR2 register ******************/ +#define DMA_CNTR2_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */ + +/****************** Bit definition for DMA_CNTR3 register ******************/ +#define DMA_CNTR3_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */ + +/****************** Bit definition for DMA_CNTR4 register ******************/ +#define DMA_CNTR4_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */ + +/****************** Bit definition for DMA_CNTR5 register ******************/ +#define DMA_CNTR5_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */ + +/****************** Bit definition for DMA_CNTR6 register ******************/ +#define DMA_CNTR6_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */ + +/****************** Bit definition for DMA_CNTR7 register ******************/ +#define DMA_CNTR7_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */ + +/****************** Bit definition for DMA_PADDR1 register *******************/ +#define DMA_PADDR1_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */ + +/****************** Bit definition for DMA_PADDR2 register *******************/ +#define DMA_PADDR2_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */ + +/****************** Bit definition for DMA_PADDR3 register *******************/ +#define DMA_PADDR3_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */ + +/****************** Bit definition for DMA_PADDR4 register *******************/ +#define DMA_PADDR4_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */ + +/****************** Bit definition for DMA_PADDR5 register *******************/ +#define DMA_PADDR5_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */ + +/****************** Bit definition for DMA_PADDR6 register *******************/ +#define DMA_PADDR6_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */ + +/****************** Bit definition for DMA_PADDR7 register *******************/ +#define DMA_PADDR7_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */ + +/****************** Bit definition for DMA_MADDR1 register *******************/ +#define DMA_MADDR1_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */ + +/****************** Bit definition for DMA_MADDR2 register *******************/ +#define DMA_MADDR2_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */ + +/****************** Bit definition for DMA_MADDR3 register *******************/ +#define DMA_MADDR3_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */ + +/****************** Bit definition for DMA_MADDR4 register *******************/ +#define DMA_MADDR4_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */ + +/****************** Bit definition for DMA_MADDR5 register *******************/ +#define DMA_MADDR5_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */ + +/****************** Bit definition for DMA_MADDR6 register *******************/ +#define DMA_MADDR6_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */ + +/****************** Bit definition for DMA_MADDR7 register *******************/ +#define DMA_MADDR7_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */ + +/******************************************************************************/ +/* External Interrupt/Event Controller */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_INTENR register *******************/ +#define EXTI_INTENR_MR0 ((uint32_t)0x00000001) /* Interrupt Mask on line 0 */ +#define EXTI_INTENR_MR1 ((uint32_t)0x00000002) /* Interrupt Mask on line 1 */ +#define EXTI_INTENR_MR2 ((uint32_t)0x00000004) /* Interrupt Mask on line 2 */ +#define EXTI_INTENR_MR3 ((uint32_t)0x00000008) /* Interrupt Mask on line 3 */ +#define EXTI_INTENR_MR4 ((uint32_t)0x00000010) /* Interrupt Mask on line 4 */ +#define EXTI_INTENR_MR5 ((uint32_t)0x00000020) /* Interrupt Mask on line 5 */ +#define EXTI_INTENR_MR6 ((uint32_t)0x00000040) /* Interrupt Mask on line 6 */ +#define EXTI_INTENR_MR7 ((uint32_t)0x00000080) /* Interrupt Mask on line 7 */ +#define EXTI_INTENR_MR8 ((uint32_t)0x00000100) /* Interrupt Mask on line 8 */ +#define EXTI_INTENR_MR9 ((uint32_t)0x00000200) /* Interrupt Mask on line 9 */ +#define EXTI_INTENR_MR10 ((uint32_t)0x00000400) /* Interrupt Mask on line 10 */ +#define EXTI_INTENR_MR11 ((uint32_t)0x00000800) /* Interrupt Mask on line 11 */ +#define EXTI_INTENR_MR12 ((uint32_t)0x00001000) /* Interrupt Mask on line 12 */ +#define EXTI_INTENR_MR13 ((uint32_t)0x00002000) /* Interrupt Mask on line 13 */ +#define EXTI_INTENR_MR14 ((uint32_t)0x00004000) /* Interrupt Mask on line 14 */ +#define EXTI_INTENR_MR15 ((uint32_t)0x00008000) /* Interrupt Mask on line 15 */ +#define EXTI_INTENR_MR16 ((uint32_t)0x00010000) /* Interrupt Mask on line 16 */ +#define EXTI_INTENR_MR17 ((uint32_t)0x00020000) /* Interrupt Mask on line 17 */ +#define EXTI_INTENR_MR18 ((uint32_t)0x00040000) /* Interrupt Mask on line 18 */ +#define EXTI_INTENR_MR19 ((uint32_t)0x00080000) /* Interrupt Mask on line 19 */ + +/******************* Bit definition for EXTI_EVENR register *******************/ +#define EXTI_EVENR_MR0 ((uint32_t)0x00000001) /* Event Mask on line 0 */ +#define EXTI_EVENR_MR1 ((uint32_t)0x00000002) /* Event Mask on line 1 */ +#define EXTI_EVENR_MR2 ((uint32_t)0x00000004) /* Event Mask on line 2 */ +#define EXTI_EVENR_MR3 ((uint32_t)0x00000008) /* Event Mask on line 3 */ +#define EXTI_EVENR_MR4 ((uint32_t)0x00000010) /* Event Mask on line 4 */ +#define EXTI_EVENR_MR5 ((uint32_t)0x00000020) /* Event Mask on line 5 */ +#define EXTI_EVENR_MR6 ((uint32_t)0x00000040) /* Event Mask on line 6 */ +#define EXTI_EVENR_MR7 ((uint32_t)0x00000080) /* Event Mask on line 7 */ +#define EXTI_EVENR_MR8 ((uint32_t)0x00000100) /* Event Mask on line 8 */ +#define EXTI_EVENR_MR9 ((uint32_t)0x00000200) /* Event Mask on line 9 */ +#define EXTI_EVENR_MR10 ((uint32_t)0x00000400) /* Event Mask on line 10 */ +#define EXTI_EVENR_MR11 ((uint32_t)0x00000800) /* Event Mask on line 11 */ +#define EXTI_EVENR_MR12 ((uint32_t)0x00001000) /* Event Mask on line 12 */ +#define EXTI_EVENR_MR13 ((uint32_t)0x00002000) /* Event Mask on line 13 */ +#define EXTI_EVENR_MR14 ((uint32_t)0x00004000) /* Event Mask on line 14 */ +#define EXTI_EVENR_MR15 ((uint32_t)0x00008000) /* Event Mask on line 15 */ +#define EXTI_EVENR_MR16 ((uint32_t)0x00010000) /* Event Mask on line 16 */ +#define EXTI_EVENR_MR17 ((uint32_t)0x00020000) /* Event Mask on line 17 */ +#define EXTI_EVENR_MR18 ((uint32_t)0x00040000) /* Event Mask on line 18 */ +#define EXTI_EVENR_MR19 ((uint32_t)0x00080000) /* Event Mask on line 19 */ + +/****************** Bit definition for EXTI_RTENR register *******************/ +#define EXTI_RTENR_TR0 ((uint32_t)0x00000001) /* Rising trigger event configuration bit of line 0 */ +#define EXTI_RTENR_TR1 ((uint32_t)0x00000002) /* Rising trigger event configuration bit of line 1 */ +#define EXTI_RTENR_TR2 ((uint32_t)0x00000004) /* Rising trigger event configuration bit of line 2 */ +#define EXTI_RTENR_TR3 ((uint32_t)0x00000008) /* Rising trigger event configuration bit of line 3 */ +#define EXTI_RTENR_TR4 ((uint32_t)0x00000010) /* Rising trigger event configuration bit of line 4 */ +#define EXTI_RTENR_TR5 ((uint32_t)0x00000020) /* Rising trigger event configuration bit of line 5 */ +#define EXTI_RTENR_TR6 ((uint32_t)0x00000040) /* Rising trigger event configuration bit of line 6 */ +#define EXTI_RTENR_TR7 ((uint32_t)0x00000080) /* Rising trigger event configuration bit of line 7 */ +#define EXTI_RTENR_TR8 ((uint32_t)0x00000100) /* Rising trigger event configuration bit of line 8 */ +#define EXTI_RTENR_TR9 ((uint32_t)0x00000200) /* Rising trigger event configuration bit of line 9 */ +#define EXTI_RTENR_TR10 ((uint32_t)0x00000400) /* Rising trigger event configuration bit of line 10 */ +#define EXTI_RTENR_TR11 ((uint32_t)0x00000800) /* Rising trigger event configuration bit of line 11 */ +#define EXTI_RTENR_TR12 ((uint32_t)0x00001000) /* Rising trigger event configuration bit of line 12 */ +#define EXTI_RTENR_TR13 ((uint32_t)0x00002000) /* Rising trigger event configuration bit of line 13 */ +#define EXTI_RTENR_TR14 ((uint32_t)0x00004000) /* Rising trigger event configuration bit of line 14 */ +#define EXTI_RTENR_TR15 ((uint32_t)0x00008000) /* Rising trigger event configuration bit of line 15 */ +#define EXTI_RTENR_TR16 ((uint32_t)0x00010000) /* Rising trigger event configuration bit of line 16 */ +#define EXTI_RTENR_TR17 ((uint32_t)0x00020000) /* Rising trigger event configuration bit of line 17 */ +#define EXTI_RTENR_TR18 ((uint32_t)0x00040000) /* Rising trigger event configuration bit of line 18 */ +#define EXTI_RTENR_TR19 ((uint32_t)0x00080000) /* Rising trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_FTENR register *******************/ +#define EXTI_FTENR_TR0 ((uint32_t)0x00000001) /* Falling trigger event configuration bit of line 0 */ +#define EXTI_FTENR_TR1 ((uint32_t)0x00000002) /* Falling trigger event configuration bit of line 1 */ +#define EXTI_FTENR_TR2 ((uint32_t)0x00000004) /* Falling trigger event configuration bit of line 2 */ +#define EXTI_FTENR_TR3 ((uint32_t)0x00000008) /* Falling trigger event configuration bit of line 3 */ +#define EXTI_FTENR_TR4 ((uint32_t)0x00000010) /* Falling trigger event configuration bit of line 4 */ +#define EXTI_FTENR_TR5 ((uint32_t)0x00000020) /* Falling trigger event configuration bit of line 5 */ +#define EXTI_FTENR_TR6 ((uint32_t)0x00000040) /* Falling trigger event configuration bit of line 6 */ +#define EXTI_FTENR_TR7 ((uint32_t)0x00000080) /* Falling trigger event configuration bit of line 7 */ +#define EXTI_FTENR_TR8 ((uint32_t)0x00000100) /* Falling trigger event configuration bit of line 8 */ +#define EXTI_FTENR_TR9 ((uint32_t)0x00000200) /* Falling trigger event configuration bit of line 9 */ +#define EXTI_FTENR_TR10 ((uint32_t)0x00000400) /* Falling trigger event configuration bit of line 10 */ +#define EXTI_FTENR_TR11 ((uint32_t)0x00000800) /* Falling trigger event configuration bit of line 11 */ +#define EXTI_FTENR_TR12 ((uint32_t)0x00001000) /* Falling trigger event configuration bit of line 12 */ +#define EXTI_FTENR_TR13 ((uint32_t)0x00002000) /* Falling trigger event configuration bit of line 13 */ +#define EXTI_FTENR_TR14 ((uint32_t)0x00004000) /* Falling trigger event configuration bit of line 14 */ +#define EXTI_FTENR_TR15 ((uint32_t)0x00008000) /* Falling trigger event configuration bit of line 15 */ +#define EXTI_FTENR_TR16 ((uint32_t)0x00010000) /* Falling trigger event configuration bit of line 16 */ +#define EXTI_FTENR_TR17 ((uint32_t)0x00020000) /* Falling trigger event configuration bit of line 17 */ +#define EXTI_FTENR_TR18 ((uint32_t)0x00040000) /* Falling trigger event configuration bit of line 18 */ +#define EXTI_FTENR_TR19 ((uint32_t)0x00080000) /* Falling trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_SWIEVR register ******************/ +#define EXTI_SWIEVR_SWIEVR0 ((uint32_t)0x00000001) /* Software Interrupt on line 0 */ +#define EXTI_SWIEVR_SWIEVR1 ((uint32_t)0x00000002) /* Software Interrupt on line 1 */ +#define EXTI_SWIEVR_SWIEVR2 ((uint32_t)0x00000004) /* Software Interrupt on line 2 */ +#define EXTI_SWIEVR_SWIEVR3 ((uint32_t)0x00000008) /* Software Interrupt on line 3 */ +#define EXTI_SWIEVR_SWIEVR4 ((uint32_t)0x00000010) /* Software Interrupt on line 4 */ +#define EXTI_SWIEVR_SWIEVR5 ((uint32_t)0x00000020) /* Software Interrupt on line 5 */ +#define EXTI_SWIEVR_SWIEVR6 ((uint32_t)0x00000040) /* Software Interrupt on line 6 */ +#define EXTI_SWIEVR_SWIEVR7 ((uint32_t)0x00000080) /* Software Interrupt on line 7 */ +#define EXTI_SWIEVR_SWIEVR8 ((uint32_t)0x00000100) /* Software Interrupt on line 8 */ +#define EXTI_SWIEVR_SWIEVR9 ((uint32_t)0x00000200) /* Software Interrupt on line 9 */ +#define EXTI_SWIEVR_SWIEVR10 ((uint32_t)0x00000400) /* Software Interrupt on line 10 */ +#define EXTI_SWIEVR_SWIEVR11 ((uint32_t)0x00000800) /* Software Interrupt on line 11 */ +#define EXTI_SWIEVR_SWIEVR12 ((uint32_t)0x00001000) /* Software Interrupt on line 12 */ +#define EXTI_SWIEVR_SWIEVR13 ((uint32_t)0x00002000) /* Software Interrupt on line 13 */ +#define EXTI_SWIEVR_SWIEVR14 ((uint32_t)0x00004000) /* Software Interrupt on line 14 */ +#define EXTI_SWIEVR_SWIEVR15 ((uint32_t)0x00008000) /* Software Interrupt on line 15 */ +#define EXTI_SWIEVR_SWIEVR16 ((uint32_t)0x00010000) /* Software Interrupt on line 16 */ +#define EXTI_SWIEVR_SWIEVR17 ((uint32_t)0x00020000) /* Software Interrupt on line 17 */ +#define EXTI_SWIEVR_SWIEVR18 ((uint32_t)0x00040000) /* Software Interrupt on line 18 */ +#define EXTI_SWIEVR_SWIEVR19 ((uint32_t)0x00080000) /* Software Interrupt on line 19 */ + +/******************* Bit definition for EXTI_INTFR register ********************/ +#define EXTI_INTF_INTF0 ((uint32_t)0x00000001) /* Pending bit for line 0 */ +#define EXTI_INTF_INTF1 ((uint32_t)0x00000002) /* Pending bit for line 1 */ +#define EXTI_INTF_INTF2 ((uint32_t)0x00000004) /* Pending bit for line 2 */ +#define EXTI_INTF_INTF3 ((uint32_t)0x00000008) /* Pending bit for line 3 */ +#define EXTI_INTF_INTF4 ((uint32_t)0x00000010) /* Pending bit for line 4 */ +#define EXTI_INTF_INTF5 ((uint32_t)0x00000020) /* Pending bit for line 5 */ +#define EXTI_INTF_INTF6 ((uint32_t)0x00000040) /* Pending bit for line 6 */ +#define EXTI_INTF_INTF7 ((uint32_t)0x00000080) /* Pending bit for line 7 */ +#define EXTI_INTF_INTF8 ((uint32_t)0x00000100) /* Pending bit for line 8 */ +#define EXTI_INTF_INTF9 ((uint32_t)0x00000200) /* Pending bit for line 9 */ +#define EXTI_INTF_INTF10 ((uint32_t)0x00000400) /* Pending bit for line 10 */ +#define EXTI_INTF_INTF11 ((uint32_t)0x00000800) /* Pending bit for line 11 */ +#define EXTI_INTF_INTF12 ((uint32_t)0x00001000) /* Pending bit for line 12 */ +#define EXTI_INTF_INTF13 ((uint32_t)0x00002000) /* Pending bit for line 13 */ +#define EXTI_INTF_INTF14 ((uint32_t)0x00004000) /* Pending bit for line 14 */ +#define EXTI_INTF_INTF15 ((uint32_t)0x00008000) /* Pending bit for line 15 */ +#define EXTI_INTF_INTF16 ((uint32_t)0x00010000) /* Pending bit for line 16 */ +#define EXTI_INTF_INTF17 ((uint32_t)0x00020000) /* Pending bit for line 17 */ +#define EXTI_INTF_INTF18 ((uint32_t)0x00040000) /* Pending bit for line 18 */ +#define EXTI_INTF_INTF19 ((uint32_t)0x00080000) /* Pending bit for line 19 */ + +/******************************************************************************/ +/* FLASH and Option Bytes Registers */ +/******************************************************************************/ + +/******************* Bit definition for FLASH_ACTLR register ******************/ + +/****************** Bit definition for FLASH_KEYR register ******************/ +#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /* FPEC Key */ + +/***************** Bit definition for FLASH_OBKEYR register ****************/ +#define FLASH_OBKEYR_OBKEYR ((uint32_t)0xFFFFFFFF) /* Option Byte Key */ + +/****************** Bit definition for FLASH_STATR register *******************/ +#define FLASH_STATR_BSY ((uint8_t)0x01) /* Busy */ +#define FLASH_STATR_PGERR ((uint8_t)0x04) /* Programming Error */ +#define FLASH_STATR_WRPRTERR ((uint8_t)0x10) /* Write Protection Error */ +#define FLASH_STATR_EOP ((uint8_t)0x20) /* End of operation */ + +/******************* Bit definition for FLASH_CTLR register *******************/ +#define FLASH_CTLR_PG ((uint32_t)0x00000001) /* Programming */ +#define FLASH_CTLR_PER ((uint32_t)0x00000002) /* Sector Erase 4K */ +#define FLASH_CTLR_MER ((uint32_t)0x00000004) /* Mass Erase */ +#define FLASH_CTLR_OPTPG ((uint32_t)0x00000010) /* Option Byte Programming */ +#define FLASH_CTLR_OPTER ((uint32_t)0x00000020) /* Option Byte Erase */ +#define FLASH_CTLR_STRT ((uint32_t)0x00000040) /* Start */ +#define FLASH_CTLR_LOCK ((uint32_t)0x00000080) /* Lock */ +#define FLASH_CTLR_OPTWRE ((uint32_t)0x00000200) /* Option Bytes Write Enable */ +#define FLASH_CTLR_ERRIE ((uint32_t)0x00000400) /* Error Interrupt Enable */ +#define FLASH_CTLR_EOPIE ((uint32_t)0x00001000) /* End of operation interrupt enable */ +#define FLASH_CTLR_FAST_LOCK ((uint32_t)0x00008000) /* Fast Lock */ +#define FLASH_CTLR_PAGE_PG ((uint32_t)0x00010000) /* Page Programming 256Byte */ +#define FLASH_CTLR_PAGE_ER ((uint32_t)0x00020000) /* Page Erase 256Byte */ +#define FLASH_CTLR_PAGE_BER32 ((uint32_t)0x00040000) /* Block Erase 32K */ +#define FLASH_CTLR_PAGE_BER64 ((uint32_t)0x00080000) /* Block Erase 64K */ +#define FLASH_CTLR_PG_STRT ((uint32_t)0x00200000) /* Page Programming Start */ + +/******************* Bit definition for FLASH_ADDR register *******************/ +#define FLASH_ADDR_FAR ((uint32_t)0xFFFFFFFF) /* Flash Address */ + +/****************** Bit definition for FLASH_OBR register *******************/ +#define FLASH_OBR_OPTERR ((uint16_t)0x0001) /* Option Byte Error */ +#define FLASH_OBR_RDPRT ((uint16_t)0x0002) /* Read protection */ + +#define FLASH_OBR_USER ((uint16_t)0x03FC) /* User Option Bytes */ +#define FLASH_OBR_WDG_SW ((uint16_t)0x0004) /* WDG_SW */ +#define FLASH_OBR_nRST_STOP ((uint16_t)0x0008) /* nRST_STOP */ +#define FLASH_OBR_nRST_STDBY ((uint16_t)0x0010) /* nRST_STDBY */ +#define FLASH_OBR_BFB2 ((uint16_t)0x0020) /* BFB2 */ + +/****************** Bit definition for FLASH_WPR register ******************/ +#define FLASH_WPR_WRP ((uint32_t)0xFFFFFFFF) /* Write Protect */ + +/****************** Bit definition for FLASH_RDPR register *******************/ +#define FLASH_RDPR_RDPR ((uint32_t)0x000000FF) /* Read protection option byte */ +#define FLASH_RDPR_nRDPR ((uint32_t)0x0000FF00) /* Read protection complemented option byte */ + +/****************** Bit definition for FLASH_USER register ******************/ +#define FLASH_USER_USER ((uint32_t)0x00FF0000) /* User option byte */ +#define FLASH_USER_nUSER ((uint32_t)0xFF000000) /* User complemented option byte */ + +/****************** Bit definition for FLASH_Data0 register *****************/ +#define FLASH_Data0_Data0 ((uint32_t)0x000000FF) /* User data storage option byte */ +#define FLASH_Data0_nData0 ((uint32_t)0x0000FF00) /* User data storage complemented option byte */ + +/****************** Bit definition for FLASH_Data1 register *****************/ +#define FLASH_Data1_Data1 ((uint32_t)0x00FF0000) /* User data storage option byte */ +#define FLASH_Data1_nData1 ((uint32_t)0xFF000000) /* User data storage complemented option byte */ + +/****************** Bit definition for FLASH_WRPR0 register ******************/ +#define FLASH_WRPR0_WRPR0 ((uint32_t)0x000000FF) /* Flash memory write protection option bytes */ +#define FLASH_WRPR0_nWRPR0 ((uint32_t)0x0000FF00) /* Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRPR1 register ******************/ +#define FLASH_WRPR1_WRPR1 ((uint32_t)0x00FF0000) /* Flash memory write protection option bytes */ +#define FLASH_WRPR1_nWRPR1 ((uint32_t)0xFF000000) /* Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRPR2 register ******************/ +#define FLASH_WRPR2_WRPR2 ((uint32_t)0x000000FF) /* Flash memory write protection option bytes */ +#define FLASH_WRPR2_nWRPR2 ((uint32_t)0x0000FF00) /* Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRPR3 register ******************/ +#define FLASH_WRPR3_WRPR3 ((uint32_t)0x00FF0000) /* Flash memory write protection option bytes */ +#define FLASH_WRPR3_nWRPR3 ((uint32_t)0xFF000000) /* Flash memory write protection complemented option bytes */ + +/******************************************************************************/ +/* General Purpose and Alternate Function I/O */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CFGLR register *******************/ +#define GPIO_CFGLR_MODE ((uint32_t)0x33333333) /* Port x mode bits */ + +#define GPIO_CFGLR_MODE0 ((uint32_t)0x00000003) /* MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CFGLR_MODE0_0 ((uint32_t)0x00000001) /* Bit 0 */ +#define GPIO_CFGLR_MODE0_1 ((uint32_t)0x00000002) /* Bit 1 */ + +#define GPIO_CFGLR_MODE1 ((uint32_t)0x00000030) /* MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CFGLR_MODE1_0 ((uint32_t)0x00000010) /* Bit 0 */ +#define GPIO_CFGLR_MODE1_1 ((uint32_t)0x00000020) /* Bit 1 */ + +#define GPIO_CFGLR_MODE2 ((uint32_t)0x00000300) /* MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CFGLR_MODE2_0 ((uint32_t)0x00000100) /* Bit 0 */ +#define GPIO_CFGLR_MODE2_1 ((uint32_t)0x00000200) /* Bit 1 */ + +#define GPIO_CFGLR_MODE3 ((uint32_t)0x00003000) /* MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CFGLR_MODE3_0 ((uint32_t)0x00001000) /* Bit 0 */ +#define GPIO_CFGLR_MODE3_1 ((uint32_t)0x00002000) /* Bit 1 */ + +#define GPIO_CFGLR_MODE4 ((uint32_t)0x00030000) /* MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CFGLR_MODE4_0 ((uint32_t)0x00010000) /* Bit 0 */ +#define GPIO_CFGLR_MODE4_1 ((uint32_t)0x00020000) /* Bit 1 */ + +#define GPIO_CFGLR_MODE5 ((uint32_t)0x00300000) /* MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CFGLR_MODE5_0 ((uint32_t)0x00100000) /* Bit 0 */ +#define GPIO_CFGLR_MODE5_1 ((uint32_t)0x00200000) /* Bit 1 */ + +#define GPIO_CFGLR_MODE6 ((uint32_t)0x03000000) /* MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CFGLR_MODE6_0 ((uint32_t)0x01000000) /* Bit 0 */ +#define GPIO_CFGLR_MODE6_1 ((uint32_t)0x02000000) /* Bit 1 */ + +#define GPIO_CFGLR_MODE7 ((uint32_t)0x30000000) /* MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CFGLR_MODE7_0 ((uint32_t)0x10000000) /* Bit 0 */ +#define GPIO_CFGLR_MODE7_1 ((uint32_t)0x20000000) /* Bit 1 */ + +#define GPIO_CFGLR_CNF ((uint32_t)0xCCCCCCCC) /* Port x configuration bits */ + +#define GPIO_CFGLR_CNF0 ((uint32_t)0x0000000C) /* CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CFGLR_CNF0_0 ((uint32_t)0x00000004) /* Bit 0 */ +#define GPIO_CFGLR_CNF0_1 ((uint32_t)0x00000008) /* Bit 1 */ + +#define GPIO_CFGLR_CNF1 ((uint32_t)0x000000C0) /* CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CFGLR_CNF1_0 ((uint32_t)0x00000040) /* Bit 0 */ +#define GPIO_CFGLR_CNF1_1 ((uint32_t)0x00000080) /* Bit 1 */ + +#define GPIO_CFGLR_CNF2 ((uint32_t)0x00000C00) /* CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CFGLR_CNF2_0 ((uint32_t)0x00000400) /* Bit 0 */ +#define GPIO_CFGLR_CNF2_1 ((uint32_t)0x00000800) /* Bit 1 */ + +#define GPIO_CFGLR_CNF3 ((uint32_t)0x0000C000) /* CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CFGLR_CNF3_0 ((uint32_t)0x00004000) /* Bit 0 */ +#define GPIO_CFGLR_CNF3_1 ((uint32_t)0x00008000) /* Bit 1 */ + +#define GPIO_CFGLR_CNF4 ((uint32_t)0x000C0000) /* CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CFGLR_CNF4_0 ((uint32_t)0x00040000) /* Bit 0 */ +#define GPIO_CFGLR_CNF4_1 ((uint32_t)0x00080000) /* Bit 1 */ + +#define GPIO_CFGLR_CNF5 ((uint32_t)0x00C00000) /* CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CFGLR_CNF5_0 ((uint32_t)0x00400000) /* Bit 0 */ +#define GPIO_CFGLR_CNF5_1 ((uint32_t)0x00800000) /* Bit 1 */ + +#define GPIO_CFGLR_CNF6 ((uint32_t)0x0C000000) /* CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CFGLR_CNF6_0 ((uint32_t)0x04000000) /* Bit 0 */ +#define GPIO_CFGLR_CNF6_1 ((uint32_t)0x08000000) /* Bit 1 */ + +#define GPIO_CFGLR_CNF7 ((uint32_t)0xC0000000) /* CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CFGLR_CNF7_0 ((uint32_t)0x40000000) /* Bit 0 */ +#define GPIO_CFGLR_CNF7_1 ((uint32_t)0x80000000) /* Bit 1 */ + +/******************* Bit definition for GPIO_CFGHR register *******************/ +#define GPIO_CFGHR_MODE ((uint32_t)0x33333333) /* Port x mode bits */ + +#define GPIO_CFGHR_MODE8 ((uint32_t)0x00000003) /* MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CFGHR_MODE8_0 ((uint32_t)0x00000001) /* Bit 0 */ +#define GPIO_CFGHR_MODE8_1 ((uint32_t)0x00000002) /* Bit 1 */ + +#define GPIO_CFGHR_MODE9 ((uint32_t)0x00000030) /* MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CFGHR_MODE9_0 ((uint32_t)0x00000010) /* Bit 0 */ +#define GPIO_CFGHR_MODE9_1 ((uint32_t)0x00000020) /* Bit 1 */ + +#define GPIO_CFGHR_MODE10 ((uint32_t)0x00000300) /* MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CFGHR_MODE10_0 ((uint32_t)0x00000100) /* Bit 0 */ +#define GPIO_CFGHR_MODE10_1 ((uint32_t)0x00000200) /* Bit 1 */ + +#define GPIO_CFGHR_MODE11 ((uint32_t)0x00003000) /* MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CFGHR_MODE11_0 ((uint32_t)0x00001000) /* Bit 0 */ +#define GPIO_CFGHR_MODE11_1 ((uint32_t)0x00002000) /* Bit 1 */ + +#define GPIO_CFGHR_MODE12 ((uint32_t)0x00030000) /* MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CFGHR_MODE12_0 ((uint32_t)0x00010000) /* Bit 0 */ +#define GPIO_CFGHR_MODE12_1 ((uint32_t)0x00020000) /* Bit 1 */ + +#define GPIO_CFGHR_MODE13 ((uint32_t)0x00300000) /* MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CFGHR_MODE13_0 ((uint32_t)0x00100000) /* Bit 0 */ +#define GPIO_CFGHR_MODE13_1 ((uint32_t)0x00200000) /* Bit 1 */ + +#define GPIO_CFGHR_MODE14 ((uint32_t)0x03000000) /* MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CFGHR_MODE14_0 ((uint32_t)0x01000000) /* Bit 0 */ +#define GPIO_CFGHR_MODE14_1 ((uint32_t)0x02000000) /* Bit 1 */ + +#define GPIO_CFGHR_MODE15 ((uint32_t)0x30000000) /* MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CFGHR_MODE15_0 ((uint32_t)0x10000000) /* Bit 0 */ +#define GPIO_CFGHR_MODE15_1 ((uint32_t)0x20000000) /* Bit 1 */ + +#define GPIO_CFGHR_CNF ((uint32_t)0xCCCCCCCC) /* Port x configuration bits */ + +#define GPIO_CFGHR_CNF8 ((uint32_t)0x0000000C) /* CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CFGHR_CNF8_0 ((uint32_t)0x00000004) /* Bit 0 */ +#define GPIO_CFGHR_CNF8_1 ((uint32_t)0x00000008) /* Bit 1 */ + +#define GPIO_CFGHR_CNF9 ((uint32_t)0x000000C0) /* CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CFGHR_CNF9_0 ((uint32_t)0x00000040) /* Bit 0 */ +#define GPIO_CFGHR_CNF9_1 ((uint32_t)0x00000080) /* Bit 1 */ + +#define GPIO_CFGHR_CNF10 ((uint32_t)0x00000C00) /* CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CFGHR_CNF10_0 ((uint32_t)0x00000400) /* Bit 0 */ +#define GPIO_CFGHR_CNF10_1 ((uint32_t)0x00000800) /* Bit 1 */ + +#define GPIO_CFGHR_CNF11 ((uint32_t)0x0000C000) /* CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CFGHR_CNF11_0 ((uint32_t)0x00004000) /* Bit 0 */ +#define GPIO_CFGHR_CNF11_1 ((uint32_t)0x00008000) /* Bit 1 */ + +#define GPIO_CFGHR_CNF12 ((uint32_t)0x000C0000) /* CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CFGHR_CNF12_0 ((uint32_t)0x00040000) /* Bit 0 */ +#define GPIO_CFGHR_CNF12_1 ((uint32_t)0x00080000) /* Bit 1 */ + +#define GPIO_CFGHR_CNF13 ((uint32_t)0x00C00000) /* CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CFGHR_CNF13_0 ((uint32_t)0x00400000) /* Bit 0 */ +#define GPIO_CFGHR_CNF13_1 ((uint32_t)0x00800000) /* Bit 1 */ + +#define GPIO_CFGHR_CNF14 ((uint32_t)0x0C000000) /* CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CFGHR_CNF14_0 ((uint32_t)0x04000000) /* Bit 0 */ +#define GPIO_CFGHR_CNF14_1 ((uint32_t)0x08000000) /* Bit 1 */ + +#define GPIO_CFGHR_CNF15 ((uint32_t)0xC0000000) /* CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CFGHR_CNF15_0 ((uint32_t)0x40000000) /* Bit 0 */ +#define GPIO_CFGHR_CNF15_1 ((uint32_t)0x80000000) /* Bit 1 */ + +/******************* Bit definition for GPIO_INDR register *******************/ +#define GPIO_INDR_IDR0 ((uint16_t)0x0001) /* Port input data, bit 0 */ +#define GPIO_INDR_IDR1 ((uint16_t)0x0002) /* Port input data, bit 1 */ +#define GPIO_INDR_IDR2 ((uint16_t)0x0004) /* Port input data, bit 2 */ +#define GPIO_INDR_IDR3 ((uint16_t)0x0008) /* Port input data, bit 3 */ +#define GPIO_INDR_IDR4 ((uint16_t)0x0010) /* Port input data, bit 4 */ +#define GPIO_INDR_IDR5 ((uint16_t)0x0020) /* Port input data, bit 5 */ +#define GPIO_INDR_IDR6 ((uint16_t)0x0040) /* Port input data, bit 6 */ +#define GPIO_INDR_IDR7 ((uint16_t)0x0080) /* Port input data, bit 7 */ +#define GPIO_INDR_IDR8 ((uint16_t)0x0100) /* Port input data, bit 8 */ +#define GPIO_INDR_IDR9 ((uint16_t)0x0200) /* Port input data, bit 9 */ +#define GPIO_INDR_IDR10 ((uint16_t)0x0400) /* Port input data, bit 10 */ +#define GPIO_INDR_IDR11 ((uint16_t)0x0800) /* Port input data, bit 11 */ +#define GPIO_INDR_IDR12 ((uint16_t)0x1000) /* Port input data, bit 12 */ +#define GPIO_INDR_IDR13 ((uint16_t)0x2000) /* Port input data, bit 13 */ +#define GPIO_INDR_IDR14 ((uint16_t)0x4000) /* Port input data, bit 14 */ +#define GPIO_INDR_IDR15 ((uint16_t)0x8000) /* Port input data, bit 15 */ + +/******************* Bit definition for GPIO_OUTDR register *******************/ +#define GPIO_OUTDR_ODR0 ((uint16_t)0x0001) /* Port output data, bit 0 */ +#define GPIO_OUTDR_ODR1 ((uint16_t)0x0002) /* Port output data, bit 1 */ +#define GPIO_OUTDR_ODR2 ((uint16_t)0x0004) /* Port output data, bit 2 */ +#define GPIO_OUTDR_ODR3 ((uint16_t)0x0008) /* Port output data, bit 3 */ +#define GPIO_OUTDR_ODR4 ((uint16_t)0x0010) /* Port output data, bit 4 */ +#define GPIO_OUTDR_ODR5 ((uint16_t)0x0020) /* Port output data, bit 5 */ +#define GPIO_OUTDR_ODR6 ((uint16_t)0x0040) /* Port output data, bit 6 */ +#define GPIO_OUTDR_ODR7 ((uint16_t)0x0080) /* Port output data, bit 7 */ +#define GPIO_OUTDR_ODR8 ((uint16_t)0x0100) /* Port output data, bit 8 */ +#define GPIO_OUTDR_ODR9 ((uint16_t)0x0200) /* Port output data, bit 9 */ +#define GPIO_OUTDR_ODR10 ((uint16_t)0x0400) /* Port output data, bit 10 */ +#define GPIO_OUTDR_ODR11 ((uint16_t)0x0800) /* Port output data, bit 11 */ +#define GPIO_OUTDR_ODR12 ((uint16_t)0x1000) /* Port output data, bit 12 */ +#define GPIO_OUTDR_ODR13 ((uint16_t)0x2000) /* Port output data, bit 13 */ +#define GPIO_OUTDR_ODR14 ((uint16_t)0x4000) /* Port output data, bit 14 */ +#define GPIO_OUTDR_ODR15 ((uint16_t)0x8000) /* Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSHR register *******************/ +#define GPIO_BSHR_BS0 ((uint32_t)0x00000001) /* Port x Set bit 0 */ +#define GPIO_BSHR_BS1 ((uint32_t)0x00000002) /* Port x Set bit 1 */ +#define GPIO_BSHR_BS2 ((uint32_t)0x00000004) /* Port x Set bit 2 */ +#define GPIO_BSHR_BS3 ((uint32_t)0x00000008) /* Port x Set bit 3 */ +#define GPIO_BSHR_BS4 ((uint32_t)0x00000010) /* Port x Set bit 4 */ +#define GPIO_BSHR_BS5 ((uint32_t)0x00000020) /* Port x Set bit 5 */ +#define GPIO_BSHR_BS6 ((uint32_t)0x00000040) /* Port x Set bit 6 */ +#define GPIO_BSHR_BS7 ((uint32_t)0x00000080) /* Port x Set bit 7 */ +#define GPIO_BSHR_BS8 ((uint32_t)0x00000100) /* Port x Set bit 8 */ +#define GPIO_BSHR_BS9 ((uint32_t)0x00000200) /* Port x Set bit 9 */ +#define GPIO_BSHR_BS10 ((uint32_t)0x00000400) /* Port x Set bit 10 */ +#define GPIO_BSHR_BS11 ((uint32_t)0x00000800) /* Port x Set bit 11 */ +#define GPIO_BSHR_BS12 ((uint32_t)0x00001000) /* Port x Set bit 12 */ +#define GPIO_BSHR_BS13 ((uint32_t)0x00002000) /* Port x Set bit 13 */ +#define GPIO_BSHR_BS14 ((uint32_t)0x00004000) /* Port x Set bit 14 */ +#define GPIO_BSHR_BS15 ((uint32_t)0x00008000) /* Port x Set bit 15 */ + +#define GPIO_BSHR_BR0 ((uint32_t)0x00010000) /* Port x Reset bit 0 */ +#define GPIO_BSHR_BR1 ((uint32_t)0x00020000) /* Port x Reset bit 1 */ +#define GPIO_BSHR_BR2 ((uint32_t)0x00040000) /* Port x Reset bit 2 */ +#define GPIO_BSHR_BR3 ((uint32_t)0x00080000) /* Port x Reset bit 3 */ +#define GPIO_BSHR_BR4 ((uint32_t)0x00100000) /* Port x Reset bit 4 */ +#define GPIO_BSHR_BR5 ((uint32_t)0x00200000) /* Port x Reset bit 5 */ +#define GPIO_BSHR_BR6 ((uint32_t)0x00400000) /* Port x Reset bit 6 */ +#define GPIO_BSHR_BR7 ((uint32_t)0x00800000) /* Port x Reset bit 7 */ +#define GPIO_BSHR_BR8 ((uint32_t)0x01000000) /* Port x Reset bit 8 */ +#define GPIO_BSHR_BR9 ((uint32_t)0x02000000) /* Port x Reset bit 9 */ +#define GPIO_BSHR_BR10 ((uint32_t)0x04000000) /* Port x Reset bit 10 */ +#define GPIO_BSHR_BR11 ((uint32_t)0x08000000) /* Port x Reset bit 11 */ +#define GPIO_BSHR_BR12 ((uint32_t)0x10000000) /* Port x Reset bit 12 */ +#define GPIO_BSHR_BR13 ((uint32_t)0x20000000) /* Port x Reset bit 13 */ +#define GPIO_BSHR_BR14 ((uint32_t)0x40000000) /* Port x Reset bit 14 */ +#define GPIO_BSHR_BR15 ((uint32_t)0x80000000) /* Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BCR register *******************/ +#define GPIO_BCR_BR0 ((uint16_t)0x0001) /* Port x Reset bit 0 */ +#define GPIO_BCR_BR1 ((uint16_t)0x0002) /* Port x Reset bit 1 */ +#define GPIO_BCR_BR2 ((uint16_t)0x0004) /* Port x Reset bit 2 */ +#define GPIO_BCR_BR3 ((uint16_t)0x0008) /* Port x Reset bit 3 */ +#define GPIO_BCR_BR4 ((uint16_t)0x0010) /* Port x Reset bit 4 */ +#define GPIO_BCR_BR5 ((uint16_t)0x0020) /* Port x Reset bit 5 */ +#define GPIO_BCR_BR6 ((uint16_t)0x0040) /* Port x Reset bit 6 */ +#define GPIO_BCR_BR7 ((uint16_t)0x0080) /* Port x Reset bit 7 */ +#define GPIO_BCR_BR8 ((uint16_t)0x0100) /* Port x Reset bit 8 */ +#define GPIO_BCR_BR9 ((uint16_t)0x0200) /* Port x Reset bit 9 */ +#define GPIO_BCR_BR10 ((uint16_t)0x0400) /* Port x Reset bit 10 */ +#define GPIO_BCR_BR11 ((uint16_t)0x0800) /* Port x Reset bit 11 */ +#define GPIO_BCR_BR12 ((uint16_t)0x1000) /* Port x Reset bit 12 */ +#define GPIO_BCR_BR13 ((uint16_t)0x2000) /* Port x Reset bit 13 */ +#define GPIO_BCR_BR14 ((uint16_t)0x4000) /* Port x Reset bit 14 */ +#define GPIO_BCR_BR15 ((uint16_t)0x8000) /* Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCK0 ((uint32_t)0x00000001) /* Port x Lock bit 0 */ +#define GPIO_LCK1 ((uint32_t)0x00000002) /* Port x Lock bit 1 */ +#define GPIO_LCK2 ((uint32_t)0x00000004) /* Port x Lock bit 2 */ +#define GPIO_LCK3 ((uint32_t)0x00000008) /* Port x Lock bit 3 */ +#define GPIO_LCK4 ((uint32_t)0x00000010) /* Port x Lock bit 4 */ +#define GPIO_LCK5 ((uint32_t)0x00000020) /* Port x Lock bit 5 */ +#define GPIO_LCK6 ((uint32_t)0x00000040) /* Port x Lock bit 6 */ +#define GPIO_LCK7 ((uint32_t)0x00000080) /* Port x Lock bit 7 */ +#define GPIO_LCK8 ((uint32_t)0x00000100) /* Port x Lock bit 8 */ +#define GPIO_LCK9 ((uint32_t)0x00000200) /* Port x Lock bit 9 */ +#define GPIO_LCK10 ((uint32_t)0x00000400) /* Port x Lock bit 10 */ +#define GPIO_LCK11 ((uint32_t)0x00000800) /* Port x Lock bit 11 */ +#define GPIO_LCK12 ((uint32_t)0x00001000) /* Port x Lock bit 12 */ +#define GPIO_LCK13 ((uint32_t)0x00002000) /* Port x Lock bit 13 */ +#define GPIO_LCK14 ((uint32_t)0x00004000) /* Port x Lock bit 14 */ +#define GPIO_LCK15 ((uint32_t)0x00008000) /* Port x Lock bit 15 */ +#define GPIO_LCKK ((uint32_t)0x00010000) /* Lock key */ + +/****************** Bit definition for AFIO_ECR register *******************/ +#define AFIO_ECR_PIN ((uint8_t)0x0F) /* PIN[3:0] bits (Pin selection) */ +#define AFIO_ECR_PIN_0 ((uint8_t)0x01) /* Bit 0 */ +#define AFIO_ECR_PIN_1 ((uint8_t)0x02) /* Bit 1 */ +#define AFIO_ECR_PIN_2 ((uint8_t)0x04) /* Bit 2 */ +#define AFIO_ECR_PIN_3 ((uint8_t)0x08) /* Bit 3 */ + +#define AFIO_ECR_PIN_PX0 ((uint8_t)0x00) /* Pin 0 selected */ +#define AFIO_ECR_PIN_PX1 ((uint8_t)0x01) /* Pin 1 selected */ +#define AFIO_ECR_PIN_PX2 ((uint8_t)0x02) /* Pin 2 selected */ +#define AFIO_ECR_PIN_PX3 ((uint8_t)0x03) /* Pin 3 selected */ +#define AFIO_ECR_PIN_PX4 ((uint8_t)0x04) /* Pin 4 selected */ +#define AFIO_ECR_PIN_PX5 ((uint8_t)0x05) /* Pin 5 selected */ +#define AFIO_ECR_PIN_PX6 ((uint8_t)0x06) /* Pin 6 selected */ +#define AFIO_ECR_PIN_PX7 ((uint8_t)0x07) /* Pin 7 selected */ +#define AFIO_ECR_PIN_PX8 ((uint8_t)0x08) /* Pin 8 selected */ +#define AFIO_ECR_PIN_PX9 ((uint8_t)0x09) /* Pin 9 selected */ +#define AFIO_ECR_PIN_PX10 ((uint8_t)0x0A) /* Pin 10 selected */ +#define AFIO_ECR_PIN_PX11 ((uint8_t)0x0B) /* Pin 11 selected */ +#define AFIO_ECR_PIN_PX12 ((uint8_t)0x0C) /* Pin 12 selected */ +#define AFIO_ECR_PIN_PX13 ((uint8_t)0x0D) /* Pin 13 selected */ +#define AFIO_ECR_PIN_PX14 ((uint8_t)0x0E) /* Pin 14 selected */ +#define AFIO_ECR_PIN_PX15 ((uint8_t)0x0F) /* Pin 15 selected */ + +#define AFIO_ECR_PORT ((uint8_t)0x70) /* PORT[2:0] bits (Port selection) */ +#define AFIO_ECR_PORT_0 ((uint8_t)0x10) /* Bit 0 */ +#define AFIO_ECR_PORT_1 ((uint8_t)0x20) /* Bit 1 */ +#define AFIO_ECR_PORT_2 ((uint8_t)0x40) /* Bit 2 */ + +#define AFIO_ECR_PORT_PA ((uint8_t)0x00) /* Port A selected */ +#define AFIO_ECR_PORT_PB ((uint8_t)0x10) /* Port B selected */ +#define AFIO_ECR_PORT_PC ((uint8_t)0x20) /* Port C selected */ +#define AFIO_ECR_PORT_PD ((uint8_t)0x30) /* Port D selected */ +#define AFIO_ECR_PORT_PE ((uint8_t)0x40) /* Port E selected */ + +#define AFIO_ECR_EVOE ((uint8_t)0x80) /* Event Output Enable */ + +/****************** Bit definition for AFIO_PCFR1register *******************/ +#define AFIO_PCFR1_SPI1_REMAP ((uint32_t)0x00000001) /* SPI1 remapping */ +#define AFIO_PCFR1_I2C1_REMAP ((uint32_t)0x00000002) /* I2C1 remapping */ +#define AFIO_PCFR1_USART1_REMAP ((uint32_t)0x00000004) /* USART1 remapping */ +#define AFIO_PCFR1_USART2_REMAP ((uint32_t)0x00000008) /* USART2 remapping */ + +#define AFIO_PCFR1_USART3_REMAP ((uint32_t)0x00000030) /* USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_PCFR1_USART3_REMAP_0 ((uint32_t)0x00000010) /* Bit 0 */ +#define AFIO_PCFR1_USART3_REMAP_1 ((uint32_t)0x00000020) /* Bit 1 */ + +#define AFIO_PCFR1_USART3_REMAP_NOREMAP ((uint32_t)0x00000000) /* No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_PCFR1_USART3_REMAP_PARTIALREMAP ((uint32_t)0x00000010) /* Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_PCFR1_USART3_REMAP_FULLREMAP ((uint32_t)0x00000030) /* Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_PCFR1_TIM1_REMAP ((uint32_t)0x000000C0) /* TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_PCFR1_TIM1_REMAP_0 ((uint32_t)0x00000040) /* Bit 0 */ +#define AFIO_PCFR1_TIM1_REMAP_1 ((uint32_t)0x00000080) /* Bit 1 */ + +#define AFIO_PCFR1_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /* No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_PCFR1_TIM1_REMAP_PARTIALREMAP ((uint32_t)0x00000040) /* Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_PCFR1_TIM1_REMAP_FULLREMAP ((uint32_t)0x000000C0) /* Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_PCFR1_TIM2_REMAP ((uint32_t)0x00000300) /* TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_PCFR1_TIM2_REMAP_0 ((uint32_t)0x00000100) /* Bit 0 */ +#define AFIO_PCFR1_TIM2_REMAP_1 ((uint32_t)0x00000200) /* Bit 1 */ + +#define AFIO_PCFR1_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /* No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_PCFR1_TIM2_REMAP_PARTIALREMAP1 ((uint32_t)0x00000100) /* Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_PCFR1_TIM2_REMAP_PARTIALREMAP2 ((uint32_t)0x00000200) /* Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_PCFR1_TIM2_REMAP_FULLREMAP ((uint32_t)0x00000300) /* Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_PCFR1_TIM3_REMAP ((uint32_t)0x00000C00) /* TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_PCFR1_TIM3_REMAP_0 ((uint32_t)0x00000400) /* Bit 0 */ +#define AFIO_PCFR1_TIM3_REMAP_1 ((uint32_t)0x00000800) /* Bit 1 */ + +#define AFIO_PCFR1_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /* No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_PCFR1_TIM3_REMAP_PARTIALREMAP ((uint32_t)0x00000800) /* Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_PCFR1_TIM3_REMAP_FULLREMAP ((uint32_t)0x00000C00) /* Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_PCFR1_TIM4_REMAP ((uint32_t)0x00001000) /* TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_PCFR1_CAN_REMAP ((uint32_t)0x00006000) /* CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_PCFR1_CAN_REMAP_0 ((uint32_t)0x00002000) /* Bit 0 */ +#define AFIO_PCFR1_CAN_REMAP_1 ((uint32_t)0x00004000) /* Bit 1 */ + +#define AFIO_PCFR1_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /* CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_PCFR1_CAN_REMAP_REMAP2 ((uint32_t)0x00004000) /* CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_PCFR1_CAN_REMAP_REMAP3 ((uint32_t)0x00006000) /* CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_PCFR1_PD01_REMAP ((uint32_t)0x00008000) /* Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_PCFR1_TIM5CH4_IREMAP ((uint32_t)0x00010000) /* TIM5 Channel4 Internal Remap */ +#define AFIO_PCFR1_ADC1_ETRGINJ_REMAP ((uint32_t)0x00020000) /* ADC 1 External Trigger Injected Conversion remapping */ +#define AFIO_PCFR1_ADC1_ETRGREG_REMAP ((uint32_t)0x00040000) /* ADC 1 External Trigger Regular Conversion remapping */ +#define AFIO_PCFR1_ADC2_ETRGINJ_REMAP ((uint32_t)0x00080000) /* ADC 2 External Trigger Injected Conversion remapping */ +#define AFIO_PCFR1_ADC2_ETRGREG_REMAP ((uint32_t)0x00100000) /* ADC 2 External Trigger Regular Conversion remapping */ + +#define AFIO_PCFR1_SWJ_CFG ((uint32_t)0x07000000) /* SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_PCFR1_SWJ_CFG_0 ((uint32_t)0x01000000) /* Bit 0 */ +#define AFIO_PCFR1_SWJ_CFG_1 ((uint32_t)0x02000000) /* Bit 1 */ +#define AFIO_PCFR1_SWJ_CFG_2 ((uint32_t)0x04000000) /* Bit 2 */ + +#define AFIO_PCFR1_SWJ_CFG_RESET ((uint32_t)0x00000000) /* Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_PCFR1_SWJ_CFG_NOJNTRST ((uint32_t)0x01000000) /* Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_PCFR1_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) /* JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_PCFR1_SWJ_CFG_DISABLE ((uint32_t)0x04000000) /* JTAG-DP Disabled and SW-DP Disabled */ + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0 ((uint16_t)0x000F) /* EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1 ((uint16_t)0x00F0) /* EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2 ((uint16_t)0x0F00) /* EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3 ((uint16_t)0xF000) /* EXTI 3 configuration */ + +#define AFIO_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /* PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /* PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /* PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /* PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /* PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /* PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /* PG[0] pin */ + +#define AFIO_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /* PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /* PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /* PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /* PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /* PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /* PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /* PG[1] pin */ + +#define AFIO_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /* PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /* PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /* PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /* PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /* PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /* PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /* PG[2] pin */ + +#define AFIO_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /* PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /* PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /* PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /* PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /* PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /* PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /* PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4 ((uint16_t)0x000F) /* EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5 ((uint16_t)0x00F0) /* EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6 ((uint16_t)0x0F00) /* EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7 ((uint16_t)0xF000) /* EXTI 7 configuration */ + +#define AFIO_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /* PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /* PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /* PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /* PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /* PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /* PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /* PG[4] pin */ + +#define AFIO_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /* PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /* PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /* PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /* PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /* PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /* PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /* PG[5] pin */ + +#define AFIO_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /* PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /* PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /* PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /* PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /* PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /* PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /* PG[6] pin */ + +#define AFIO_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /* PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /* PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /* PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /* PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /* PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /* PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /* PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8 ((uint16_t)0x000F) /* EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9 ((uint16_t)0x00F0) /* EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10 ((uint16_t)0x0F00) /* EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11 ((uint16_t)0xF000) /* EXTI 11 configuration */ + +#define AFIO_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /* PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /* PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /* PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /* PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /* PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /* PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /* PG[8] pin */ + +#define AFIO_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /* PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /* PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /* PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /* PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /* PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /* PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /* PG[9] pin */ + +#define AFIO_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /* PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /* PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /* PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /* PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /* PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /* PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /* PG[10] pin */ + +#define AFIO_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /* PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /* PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /* PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /* PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /* PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /* PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /* PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12 ((uint16_t)0x000F) /* EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13 ((uint16_t)0x00F0) /* EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14 ((uint16_t)0x0F00) /* EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15 ((uint16_t)0xF000) /* EXTI 15 configuration */ + +#define AFIO_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /* PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /* PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /* PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /* PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /* PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /* PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /* PG[12] pin */ + +#define AFIO_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /* PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /* PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /* PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /* PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /* PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /* PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /* PG[13] pin */ + +#define AFIO_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /* PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /* PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /* PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /* PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /* PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /* PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /* PG[14] pin */ + +#define AFIO_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /* PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /* PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /* PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /* PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /* PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /* PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /* PG[15] pin */ + +/******************************************************************************/ +/* Independent WATCHDOG */ +/******************************************************************************/ + +/******************* Bit definition for IWDG_CTLR register ********************/ +#define IWDG_KEY ((uint16_t)0xFFFF) /* Key value (write only, read 0000h) */ + +/******************* Bit definition for IWDG_PSCR register ********************/ +#define IWDG_PR ((uint8_t)0x07) /* PR[2:0] (Prescaler divider) */ +#define IWDG_PR_0 ((uint8_t)0x01) /* Bit 0 */ +#define IWDG_PR_1 ((uint8_t)0x02) /* Bit 1 */ +#define IWDG_PR_2 ((uint8_t)0x04) /* Bit 2 */ + +/******************* Bit definition for IWDG_RLDR register *******************/ +#define IWDG_RL ((uint16_t)0x0FFF) /* Watchdog counter reload value */ + +/******************* Bit definition for IWDG_STATR register ********************/ +#define IWDG_PVU ((uint8_t)0x01) /* Watchdog prescaler value update */ +#define IWDG_RVU ((uint8_t)0x02) /* Watchdog counter reload value update */ + +/******************************************************************************/ +/* Inter-integrated Circuit Interface */ +/******************************************************************************/ + +/******************* Bit definition for I2C_CTLR1 register ********************/ +#define I2C_CTLR1_PE ((uint16_t)0x0001) /* Peripheral Enable */ +#define I2C_CTLR1_SMBUS ((uint16_t)0x0002) /* SMBus Mode */ +#define I2C_CTLR1_SMBTYPE ((uint16_t)0x0008) /* SMBus Type */ +#define I2C_CTLR1_ENARP ((uint16_t)0x0010) /* ARP Enable */ +#define I2C_CTLR1_ENPEC ((uint16_t)0x0020) /* PEC Enable */ +#define I2C_CTLR1_ENGC ((uint16_t)0x0040) /* General Call Enable */ +#define I2C_CTLR1_NOSTRETCH ((uint16_t)0x0080) /* Clock Stretching Disable (Slave mode) */ +#define I2C_CTLR1_START ((uint16_t)0x0100) /* Start Generation */ +#define I2C_CTLR1_STOP ((uint16_t)0x0200) /* Stop Generation */ +#define I2C_CTLR1_ACK ((uint16_t)0x0400) /* Acknowledge Enable */ +#define I2C_CTLR1_POS ((uint16_t)0x0800) /* Acknowledge/PEC Position (for data reception) */ +#define I2C_CTLR1_PEC ((uint16_t)0x1000) /* Packet Error Checking */ +#define I2C_CTLR1_ALERT ((uint16_t)0x2000) /* SMBus Alert */ +#define I2C_CTLR1_SWRST ((uint16_t)0x8000) /* Software Reset */ + +/******************* Bit definition for I2C_CTLR2 register ********************/ +#define I2C_CTLR2_FREQ ((uint16_t)0x003F) /* FREQ[5:0] bits (Peripheral Clock Frequency) */ +#define I2C_CTLR2_FREQ_0 ((uint16_t)0x0001) /* Bit 0 */ +#define I2C_CTLR2_FREQ_1 ((uint16_t)0x0002) /* Bit 1 */ +#define I2C_CTLR2_FREQ_2 ((uint16_t)0x0004) /* Bit 2 */ +#define I2C_CTLR2_FREQ_3 ((uint16_t)0x0008) /* Bit 3 */ +#define I2C_CTLR2_FREQ_4 ((uint16_t)0x0010) /* Bit 4 */ +#define I2C_CTLR2_FREQ_5 ((uint16_t)0x0020) /* Bit 5 */ + +#define I2C_CTLR2_ITERREN ((uint16_t)0x0100) /* Error Interrupt Enable */ +#define I2C_CTLR2_ITEVTEN ((uint16_t)0x0200) /* Event Interrupt Enable */ +#define I2C_CTLR2_ITBUFEN ((uint16_t)0x0400) /* Buffer Interrupt Enable */ +#define I2C_CTLR2_DMAEN ((uint16_t)0x0800) /* DMA Requests Enable */ +#define I2C_CTLR2_LAST ((uint16_t)0x1000) /* DMA Last Transfer */ + +/******************* Bit definition for I2C_OADDR1 register *******************/ +#define I2C_OADDR1_ADD1_7 ((uint16_t)0x00FE) /* Interface Address */ +#define I2C_OADDR1_ADD8_9 ((uint16_t)0x0300) /* Interface Address */ + +#define I2C_OADDR1_ADD0 ((uint16_t)0x0001) /* Bit 0 */ +#define I2C_OADDR1_ADD1 ((uint16_t)0x0002) /* Bit 1 */ +#define I2C_OADDR1_ADD2 ((uint16_t)0x0004) /* Bit 2 */ +#define I2C_OADDR1_ADD3 ((uint16_t)0x0008) /* Bit 3 */ +#define I2C_OADDR1_ADD4 ((uint16_t)0x0010) /* Bit 4 */ +#define I2C_OADDR1_ADD5 ((uint16_t)0x0020) /* Bit 5 */ +#define I2C_OADDR1_ADD6 ((uint16_t)0x0040) /* Bit 6 */ +#define I2C_OADDR1_ADD7 ((uint16_t)0x0080) /* Bit 7 */ +#define I2C_OADDR1_ADD8 ((uint16_t)0x0100) /* Bit 8 */ +#define I2C_OADDR1_ADD9 ((uint16_t)0x0200) /* Bit 9 */ + +#define I2C_OADDR1_ADDMODE ((uint16_t)0x8000) /* Addressing Mode (Slave mode) */ + +/******************* Bit definition for I2C_OADDR2 register *******************/ +#define I2C_OADDR2_ENDUAL ((uint8_t)0x01) /* Dual addressing mode enable */ +#define I2C_OADDR2_ADD2 ((uint8_t)0xFE) /* Interface address */ + +/******************** Bit definition for I2C_DATAR register ********************/ +#define I2C_DR_DATAR ((uint8_t)0xFF) /* 8-bit Data Register */ + +/******************* Bit definition for I2C_STAR1 register ********************/ +#define I2C_STAR1_SB ((uint16_t)0x0001) /* Start Bit (Master mode) */ +#define I2C_STAR1_ADDR ((uint16_t)0x0002) /* Address sent (master mode)/matched (slave mode) */ +#define I2C_STAR1_BTF ((uint16_t)0x0004) /* Byte Transfer Finished */ +#define I2C_STAR1_ADD10 ((uint16_t)0x0008) /* 10-bit header sent (Master mode) */ +#define I2C_STAR1_STOPF ((uint16_t)0x0010) /* Stop detection (Slave mode) */ +#define I2C_STAR1_RXNE ((uint16_t)0x0040) /* Data Register not Empty (receivers) */ +#define I2C_STAR1_TXE ((uint16_t)0x0080) /* Data Register Empty (transmitters) */ +#define I2C_STAR1_BERR ((uint16_t)0x0100) /* Bus Error */ +#define I2C_STAR1_ARLO ((uint16_t)0x0200) /* Arbitration Lost (master mode) */ +#define I2C_STAR1_AF ((uint16_t)0x0400) /* Acknowledge Failure */ +#define I2C_STAR1_OVR ((uint16_t)0x0800) /* Overrun/Underrun */ +#define I2C_STAR1_PECERR ((uint16_t)0x1000) /* PEC Error in reception */ +#define I2C_STAR1_TIMEOUT ((uint16_t)0x4000) /* Timeout or Tlow Error */ +#define I2C_STAR1_SMBALERT ((uint16_t)0x8000) /* SMBus Alert */ + +/******************* Bit definition for I2C_STAR2 register ********************/ +#define I2C_STAR2_MSL ((uint16_t)0x0001) /* Master/Slave */ +#define I2C_STAR2_BUSY ((uint16_t)0x0002) /* Bus Busy */ +#define I2C_STAR2_TRA ((uint16_t)0x0004) /* Transmitter/Receiver */ +#define I2C_STAR2_GENCALL ((uint16_t)0x0010) /* General Call Address (Slave mode) */ +#define I2C_STAR2_SMBDEFAULT ((uint16_t)0x0020) /* SMBus Device Default Address (Slave mode) */ +#define I2C_STAR2_SMBHOST ((uint16_t)0x0040) /* SMBus Host Header (Slave mode) */ +#define I2C_STAR2_DUALF ((uint16_t)0x0080) /* Dual Flag (Slave mode) */ +#define I2C_STAR2_PEC ((uint16_t)0xFF00) /* Packet Error Checking Register */ + +/******************* Bit definition for I2C_CKCFGR register ********************/ +#define I2C_CKCFGR_CCR ((uint16_t)0x0FFF) /* Clock Control Register in Fast/Standard mode (Master mode) */ +#define I2C_CKCFGR_DUTY ((uint16_t)0x4000) /* Fast Mode Duty Cycle */ +#define I2C_CKCFGR_FS ((uint16_t)0x8000) /* I2C Master Mode Selection */ + +/****************** Bit definition for I2C_RTR register *******************/ +#define I2C_RTR_TRISE ((uint8_t)0x3F) /* Maximum Rise Time in Fast/Standard mode (Master mode) */ + +/******************************************************************************/ +/* Power Control */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CTLR register ********************/ +#define PWR_CTLR_LPDS ((uint16_t)0x0001) /* Low-Power Deepsleep */ +#define PWR_CTLR_PDDS ((uint16_t)0x0002) /* Power Down Deepsleep */ +#define PWR_CTLR_CWUF ((uint16_t)0x0004) /* Clear Wakeup Flag */ +#define PWR_CTLR_CSBF ((uint16_t)0x0008) /* Clear Standby Flag */ +#define PWR_CTLR_PVDE ((uint16_t)0x0010) /* Power Voltage Detector Enable */ + +#define PWR_CTLR_PLS ((uint16_t)0x00E0) /* PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CTLR_PLS_0 ((uint16_t)0x0020) /* Bit 0 */ +#define PWR_CTLR_PLS_1 ((uint16_t)0x0040) /* Bit 1 */ +#define PWR_CTLR_PLS_2 ((uint16_t)0x0080) /* Bit 2 */ + +#define PWR_CTLR_PLS_2V2 ((uint16_t)0x0000) /* PVD level 2.2V */ +#define PWR_CTLR_PLS_2V3 ((uint16_t)0x0020) /* PVD level 2.3V */ +#define PWR_CTLR_PLS_2V4 ((uint16_t)0x0040) /* PVD level 2.4V */ +#define PWR_CTLR_PLS_2V5 ((uint16_t)0x0060) /* PVD level 2.5V */ +#define PWR_CTLR_PLS_2V6 ((uint16_t)0x0080) /* PVD level 2.6V */ +#define PWR_CTLR_PLS_2V7 ((uint16_t)0x00A0) /* PVD level 2.7V */ +#define PWR_CTLR_PLS_2V8 ((uint16_t)0x00C0) /* PVD level 2.8V */ +#define PWR_CTLR_PLS_2V9 ((uint16_t)0x00E0) /* PVD level 2.9V */ + +#define PWR_CTLR_DBP ((uint16_t)0x0100) /* Disable Backup Domain write protection */ + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF ((uint16_t)0x0001) /* Wakeup Flag */ +#define PWR_CSR_SBF ((uint16_t)0x0002) /* Standby Flag */ +#define PWR_CSR_PVDO ((uint16_t)0x0004) /* PVD Output */ +#define PWR_CSR_EWUP ((uint16_t)0x0100) /* Enable WKUP pin */ + +/******************************************************************************/ +/* Reset and Clock Control */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CTLR register ********************/ +#define RCC_HSION ((uint32_t)0x00000001) /* Internal High Speed clock enable */ +#define RCC_HSIRDY ((uint32_t)0x00000002) /* Internal High Speed clock ready flag */ +#define RCC_HSITRIM ((uint32_t)0x000000F8) /* Internal High Speed clock trimming */ +#define RCC_HSICAL ((uint32_t)0x0000FF00) /* Internal High Speed clock Calibration */ +#define RCC_HSEON ((uint32_t)0x00010000) /* External High Speed clock enable */ +#define RCC_HSERDY ((uint32_t)0x00020000) /* External High Speed clock ready flag */ +#define RCC_HSEBYP ((uint32_t)0x00040000) /* External High Speed clock Bypass */ +#define RCC_CSSON ((uint32_t)0x00080000) /* Clock Security System enable */ +#define RCC_PLLON ((uint32_t)0x01000000) /* PLL enable */ +#define RCC_PLLRDY ((uint32_t)0x02000000) /* PLL clock ready flag */ + +/******************* Bit definition for RCC_CFGR0 register *******************/ +#define RCC_SW ((uint32_t)0x00000003) /* SW[1:0] bits (System clock Switch) */ +#define RCC_SW_0 ((uint32_t)0x00000001) /* Bit 0 */ +#define RCC_SW_1 ((uint32_t)0x00000002) /* Bit 1 */ + +#define RCC_SW_HSI ((uint32_t)0x00000000) /* HSI selected as system clock */ +#define RCC_SW_HSE ((uint32_t)0x00000001) /* HSE selected as system clock */ +#define RCC_SW_PLL ((uint32_t)0x00000002) /* PLL selected as system clock */ + +#define RCC_SWS ((uint32_t)0x0000000C) /* SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_SWS_0 ((uint32_t)0x00000004) /* Bit 0 */ +#define RCC_SWS_1 ((uint32_t)0x00000008) /* Bit 1 */ + +#define RCC_SWS_HSI ((uint32_t)0x00000000) /* HSI oscillator used as system clock */ +#define RCC_SWS_HSE ((uint32_t)0x00000004) /* HSE oscillator used as system clock */ +#define RCC_SWS_PLL ((uint32_t)0x00000008) /* PLL used as system clock */ + +#define RCC_HPRE ((uint32_t)0x000000F0) /* HPRE[3:0] bits (AHB prescaler) */ +#define RCC_HPRE_0 ((uint32_t)0x00000010) /* Bit 0 */ +#define RCC_HPRE_1 ((uint32_t)0x00000020) /* Bit 1 */ +#define RCC_HPRE_2 ((uint32_t)0x00000040) /* Bit 2 */ +#define RCC_HPRE_3 ((uint32_t)0x00000080) /* Bit 3 */ + +#define RCC_HPRE_DIV1 ((uint32_t)0x00000000) /* SYSCLK not divided */ +#define RCC_HPRE_DIV2 ((uint32_t)0x00000080) /* SYSCLK divided by 2 */ +#define RCC_HPRE_DIV4 ((uint32_t)0x00000090) /* SYSCLK divided by 4 */ +#define RCC_HPRE_DIV8 ((uint32_t)0x000000A0) /* SYSCLK divided by 8 */ +#define RCC_HPRE_DIV16 ((uint32_t)0x000000B0) /* SYSCLK divided by 16 */ +#define RCC_HPRE_DIV64 ((uint32_t)0x000000C0) /* SYSCLK divided by 64 */ +#define RCC_HPRE_DIV128 ((uint32_t)0x000000D0) /* SYSCLK divided by 128 */ +#define RCC_HPRE_DIV256 ((uint32_t)0x000000E0) /* SYSCLK divided by 256 */ +#define RCC_HPRE_DIV512 ((uint32_t)0x000000F0) /* SYSCLK divided by 512 */ + +#define RCC_PPRE1 ((uint32_t)0x00000700) /* PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_PPRE1_0 ((uint32_t)0x00000100) /* Bit 0 */ +#define RCC_PPRE1_1 ((uint32_t)0x00000200) /* Bit 1 */ +#define RCC_PPRE1_2 ((uint32_t)0x00000400) /* Bit 2 */ + +#define RCC_PPRE1_DIV1 ((uint32_t)0x00000000) /* PPRE1 not divided */ +#define RCC_PPRE1_DIV2 ((uint32_t)0x00000400) /* PPRE1 divided by 2 */ +#define RCC_PPRE1_DIV4 ((uint32_t)0x00000500) /* PPRE1 divided by 4 */ +#define RCC_PPRE1_DIV8 ((uint32_t)0x00000600) /* PPRE1 divided by 8 */ +#define RCC_PPRE1_DIV16 ((uint32_t)0x00000700) /* PPRE1 divided by 16 */ + +#define RCC_PPRE2 ((uint32_t)0x00003800) /* PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_PPRE2_0 ((uint32_t)0x00000800) /* Bit 0 */ +#define RCC_PPRE2_1 ((uint32_t)0x00001000) /* Bit 1 */ +#define RCC_PPRE2_2 ((uint32_t)0x00002000) /* Bit 2 */ + +#define RCC_PPRE2_DIV1 ((uint32_t)0x00000000) /* PPRE2 not divided */ +#define RCC_PPRE2_DIV2 ((uint32_t)0x00002000) /* PPRE2 divided by 2 */ +#define RCC_PPRE2_DIV4 ((uint32_t)0x00002800) /* PPRE2 divided by 4 */ +#define RCC_PPRE2_DIV8 ((uint32_t)0x00003000) /* PPRE2 divided by 8 */ +#define RCC_PPRE2_DIV16 ((uint32_t)0x00003800) /* PPRE2 divided by 16 */ + +#define RCC_ADCPRE ((uint32_t)0x0000C000) /* ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_ADCPRE_0 ((uint32_t)0x00004000) /* Bit 0 */ +#define RCC_ADCPRE_1 ((uint32_t)0x00008000) /* Bit 1 */ + +#define RCC_ADCPRE_DIV2 ((uint32_t)0x00000000) /* ADCPRE divided by 2 */ +#define RCC_ADCPRE_DIV4 ((uint32_t)0x00004000) /* ADCPRE divided by 4 */ +#define RCC_ADCPRE_DIV6 ((uint32_t)0x00008000) /* ADCPRE divided by 6 */ +#define RCC_ADCPRE_DIV8 ((uint32_t)0x0000C000) /* ADCPRE divided by 8 */ + +#define RCC_PLLSRC ((uint32_t)0x00010000) /* PLL entry clock source */ + +#define RCC_PLLXTPRE ((uint32_t)0x00020000) /* HSE divider for PLL entry */ + +#define RCC_PLLMULL ((uint32_t)0x003C0000) /* PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_PLLMULL_0 ((uint32_t)0x00040000) /* Bit 0 */ +#define RCC_PLLMULL_1 ((uint32_t)0x00080000) /* Bit 1 */ +#define RCC_PLLMULL_2 ((uint32_t)0x00100000) /* Bit 2 */ +#define RCC_PLLMULL_3 ((uint32_t)0x00200000) /* Bit 3 */ + +#define RCC_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /* HSI clock divided by 2 selected as PLL entry clock source */ +#define RCC_PLLSRC_HSE ((uint32_t)0x00010000) /* HSE clock selected as PLL entry clock source */ + +#define RCC_PLLXTPRE_HSE ((uint32_t)0x00000000) /* HSE clock not divided for PLL entry */ +#define RCC_PLLXTPRE_HSE_Div2 ((uint32_t)0x00020000) /* HSE clock divided by 2 for PLL entry */ + +/* for other CH32V20x */ +#define RCC_PLLMULL2 ((uint32_t)0x00000000) /* PLL input clock*2 */ +#define RCC_PLLMULL3 ((uint32_t)0x00040000) /* PLL input clock*3 */ +#define RCC_PLLMULL4 ((uint32_t)0x00080000) /* PLL input clock*4 */ +#define RCC_PLLMULL5 ((uint32_t)0x000C0000) /* PLL input clock*5 */ +#define RCC_PLLMULL6 ((uint32_t)0x00100000) /* PLL input clock*6 */ +#define RCC_PLLMULL7 ((uint32_t)0x00140000) /* PLL input clock*7 */ +#define RCC_PLLMULL8 ((uint32_t)0x00180000) /* PLL input clock*8 */ +#define RCC_PLLMULL9 ((uint32_t)0x001C0000) /* PLL input clock*9 */ +#define RCC_PLLMULL10 ((uint32_t)0x00200000) /* PLL input clock10 */ +#define RCC_PLLMULL11 ((uint32_t)0x00240000) /* PLL input clock*11 */ +#define RCC_PLLMULL12 ((uint32_t)0x00280000) /* PLL input clock*12 */ +#define RCC_PLLMULL13 ((uint32_t)0x002C0000) /* PLL input clock*13 */ +#define RCC_PLLMULL14 ((uint32_t)0x00300000) /* PLL input clock*14 */ +#define RCC_PLLMULL15 ((uint32_t)0x00340000) /* PLL input clock*15 */ +#define RCC_PLLMULL16 ((uint32_t)0x00380000) /* PLL input clock*16 */ +#define RCC_PLLMULL18 ((uint32_t)0x003C0000) /* PLL input clock*18 */ + +#define RCC_USBPRE ((uint32_t)0x00400000) /* USB Device prescaler */ + +#define RCC_CFGR0_MCO ((uint32_t)0x07000000) /* MCO[2:0] bits (Microcontroller Clock Output) */ +#define RCC_MCO_0 ((uint32_t)0x01000000) /* Bit 0 */ +#define RCC_MCO_1 ((uint32_t)0x02000000) /* Bit 1 */ +#define RCC_MCO_2 ((uint32_t)0x04000000) /* Bit 2 */ + +#define RCC_MCO_NOCLOCK ((uint32_t)0x00000000) /* No clock */ +#define RCC_CFGR0_MCO_SYSCLK ((uint32_t)0x04000000) /* System clock selected as MCO source */ +#define RCC_CFGR0_MCO_HSI ((uint32_t)0x05000000) /* HSI clock selected as MCO source */ +#define RCC_CFGR0_MCO_HSE ((uint32_t)0x06000000) /* HSE clock selected as MCO source */ +#define RCC_CFGR0_MCO_PLL ((uint32_t)0x07000000) /* PLL clock divided by 2 selected as MCO source */ + +/******************* Bit definition for RCC_INTR register ********************/ +#define RCC_LSIRDYF ((uint32_t)0x00000001) /* LSI Ready Interrupt flag */ +#define RCC_LSERDYF ((uint32_t)0x00000002) /* LSE Ready Interrupt flag */ +#define RCC_HSIRDYF ((uint32_t)0x00000004) /* HSI Ready Interrupt flag */ +#define RCC_HSERDYF ((uint32_t)0x00000008) /* HSE Ready Interrupt flag */ +#define RCC_PLLRDYF ((uint32_t)0x00000010) /* PLL Ready Interrupt flag */ +#define RCC_CSSF ((uint32_t)0x00000080) /* Clock Security System Interrupt flag */ +#define RCC_LSIRDYIE ((uint32_t)0x00000100) /* LSI Ready Interrupt Enable */ +#define RCC_LSERDYIE ((uint32_t)0x00000200) /* LSE Ready Interrupt Enable */ +#define RCC_HSIRDYIE ((uint32_t)0x00000400) /* HSI Ready Interrupt Enable */ +#define RCC_HSERDYIE ((uint32_t)0x00000800) /* HSE Ready Interrupt Enable */ +#define RCC_PLLRDYIE ((uint32_t)0x00001000) /* PLL Ready Interrupt Enable */ +#define RCC_LSIRDYC ((uint32_t)0x00010000) /* LSI Ready Interrupt Clear */ +#define RCC_LSERDYC ((uint32_t)0x00020000) /* LSE Ready Interrupt Clear */ +#define RCC_HSIRDYC ((uint32_t)0x00040000) /* HSI Ready Interrupt Clear */ +#define RCC_HSERDYC ((uint32_t)0x00080000) /* HSE Ready Interrupt Clear */ +#define RCC_PLLRDYC ((uint32_t)0x00100000) /* PLL Ready Interrupt Clear */ +#define RCC_CSSC ((uint32_t)0x00800000) /* Clock Security System Interrupt Clear */ + +/***************** Bit definition for RCC_APB2PRSTR register *****************/ +#define RCC_AFIORST ((uint32_t)0x00000001) /* Alternate Function I/O reset */ +#define RCC_IOPARST ((uint32_t)0x00000004) /* I/O port A reset */ +#define RCC_IOPBRST ((uint32_t)0x00000008) /* I/O port B reset */ +#define RCC_IOPCRST ((uint32_t)0x00000010) /* I/O port C reset */ +#define RCC_IOPDRST ((uint32_t)0x00000020) /* I/O port D reset */ +#define RCC_ADC1RST ((uint32_t)0x00000200) /* ADC 1 interface reset */ + +#define RCC_ADC2RST ((uint32_t)0x00000400) /* ADC 2 interface reset */ + +#define RCC_TIM1RST ((uint32_t)0x00000800) /* TIM1 Timer reset */ +#define RCC_SPI1RST ((uint32_t)0x00001000) /* SPI 1 reset */ +#define RCC_USART1RST ((uint32_t)0x00004000) /* USART1 reset */ + +#define RCC_IOPERST ((uint32_t)0x00000040) /* I/O port E reset */ + +/***************** Bit definition for RCC_APB1PRSTR register *****************/ +#define RCC_TIM2RST ((uint32_t)0x00000001) /* Timer 2 reset */ +#define RCC_TIM3RST ((uint32_t)0x00000002) /* Timer 3 reset */ +#define RCC_WWDGRST ((uint32_t)0x00000800) /* Window Watchdog reset */ +#define RCC_USART2RST ((uint32_t)0x00020000) /* USART 2 reset */ +#define RCC_I2C1RST ((uint32_t)0x00200000) /* I2C 1 reset */ + +#define RCC_CAN1RST ((uint32_t)0x02000000) /* CAN1 reset */ + +#define RCC_BKPRST ((uint32_t)0x08000000) /* Backup interface reset */ +#define RCC_PWRRST ((uint32_t)0x10000000) /* Power interface reset */ + +#define RCC_TIM4RST ((uint32_t)0x00000004) /* Timer 4 reset */ +#define RCC_SPI2RST ((uint32_t)0x00004000) /* SPI 2 reset */ +#define RCC_USART3RST ((uint32_t)0x00040000) /* USART 3 reset */ +#define RCC_I2C2RST ((uint32_t)0x00400000) /* I2C 2 reset */ + +#define RCC_USBRST ((uint32_t)0x00800000) /* USB Device reset */ + +/****************** Bit definition for RCC_AHBPCENR register ******************/ +#define RCC_DMA1EN ((uint16_t)0x0001) /* DMA1 clock enable */ +#define RCC_SRAMEN ((uint16_t)0x0004) /* SRAM interface clock enable */ +#define RCC_FLITFEN ((uint16_t)0x0010) /* FLITF clock enable */ +#define RCC_CRCEN ((uint16_t)0x0040) /* CRC clock enable */ +#define RCC_USBFS ((uint16_t)0x1000) +#define RCC_USBHD RCC_USBFS + +/****************** Bit definition for RCC_APB2PCENR register *****************/ +#define RCC_AFIOEN ((uint32_t)0x00000001) /* Alternate Function I/O clock enable */ +#define RCC_IOPAEN ((uint32_t)0x00000004) /* I/O port A clock enable */ +#define RCC_IOPBEN ((uint32_t)0x00000008) /* I/O port B clock enable */ +#define RCC_IOPCEN ((uint32_t)0x00000010) /* I/O port C clock enable */ +#define RCC_IOPDEN ((uint32_t)0x00000020) /* I/O port D clock enable */ +#define RCC_ADC1EN ((uint32_t)0x00000200) /* ADC 1 interface clock enable */ + +#define RCC_ADC2EN ((uint32_t)0x00000400) /* ADC 2 interface clock enable */ + +#define RCC_TIM1EN ((uint32_t)0x00000800) /* TIM1 Timer clock enable */ +#define RCC_SPI1EN ((uint32_t)0x00001000) /* SPI 1 clock enable */ +#define RCC_USART1EN ((uint32_t)0x00004000) /* USART1 clock enable */ + +/***************** Bit definition for RCC_APB1PCENR register ******************/ +#define RCC_TIM2EN ((uint32_t)0x00000001) /* Timer 2 clock enabled*/ +#define RCC_TIM3EN ((uint32_t)0x00000002) /* Timer 3 clock enable */ +#define RCC_WWDGEN ((uint32_t)0x00000800) /* Window Watchdog clock enable */ +#define RCC_USART2EN ((uint32_t)0x00020000) /* USART 2 clock enable */ +#define RCC_I2C1EN ((uint32_t)0x00200000) /* I2C 1 clock enable */ + +#define RCC_BKPEN ((uint32_t)0x08000000) /* Backup interface clock enable */ +#define RCC_PWREN ((uint32_t)0x10000000) /* Power interface clock enable */ + +#define RCC_USBEN ((uint32_t)0x00800000) /* USB Device clock enable */ + +/******************* Bit definition for RCC_BDCTLR register *******************/ +#define RCC_LSEON ((uint32_t)0x00000001) /* External Low Speed oscillator enable */ +#define RCC_LSERDY ((uint32_t)0x00000002) /* External Low Speed oscillator Ready */ +#define RCC_LSEBYP ((uint32_t)0x00000004) /* External Low Speed oscillator Bypass */ + +#define RCC_RTCSEL ((uint32_t)0x00000300) /* RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_RTCSEL_0 ((uint32_t)0x00000100) /* Bit 0 */ +#define RCC_RTCSEL_1 ((uint32_t)0x00000200) /* Bit 1 */ + +#define RCC_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /* No clock */ +#define RCC_RTCSEL_LSE ((uint32_t)0x00000100) /* LSE oscillator clock used as RTC clock */ +#define RCC_RTCSEL_LSI ((uint32_t)0x00000200) /* LSI oscillator clock used as RTC clock */ +#define RCC_RTCSEL_HSE ((uint32_t)0x00000300) /* HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_RTCEN ((uint32_t)0x00008000) /* RTC clock enable */ +#define RCC_BDRST ((uint32_t)0x00010000) /* Backup domain software reset */ + +/******************* Bit definition for RCC_RSTSCKR register ********************/ +#define RCC_LSION ((uint32_t)0x00000001) /* Internal Low Speed oscillator enable */ +#define RCC_LSIRDY ((uint32_t)0x00000002) /* Internal Low Speed oscillator Ready */ +#define RCC_RMVF ((uint32_t)0x01000000) /* Remove reset flag */ +#define RCC_PINRSTF ((uint32_t)0x04000000) /* PIN reset flag */ +#define RCC_PORRSTF ((uint32_t)0x08000000) /* POR/PDR reset flag */ +#define RCC_SFTRSTF ((uint32_t)0x10000000) /* Software Reset flag */ +#define RCC_IWDGRSTF ((uint32_t)0x20000000) /* Independent Watchdog reset flag */ +#define RCC_WWDGRSTF ((uint32_t)0x40000000) /* Window watchdog reset flag */ +#define RCC_LPWRRSTF ((uint32_t)0x80000000) /* Low-Power reset flag */ + +/******************************************************************************/ +/* Real-Time Clock */ +/******************************************************************************/ + +/******************* Bit definition for RTC_CTLRH register ********************/ +#define RTC_CTLRH_SECIE ((uint8_t)0x01) /* Second Interrupt Enable */ +#define RTC_CTLRH_ALRIE ((uint8_t)0x02) /* Alarm Interrupt Enable */ +#define RTC_CTLRH_OWIE ((uint8_t)0x04) /* OverfloW Interrupt Enable */ + +/******************* Bit definition for RTC_CTLRL register ********************/ +#define RTC_CTLRL_SECF ((uint8_t)0x01) /* Second Flag */ +#define RTC_CTLRL_ALRF ((uint8_t)0x02) /* Alarm Flag */ +#define RTC_CTLRL_OWF ((uint8_t)0x04) /* OverfloW Flag */ +#define RTC_CTLRL_RSF ((uint8_t)0x08) /* Registers Synchronized Flag */ +#define RTC_CTLRL_CNF ((uint8_t)0x10) /* Configuration Flag */ +#define RTC_CTLRL_RTOFF ((uint8_t)0x20) /* RTC operation OFF */ + +/******************* Bit definition for RTC_PSCH register *******************/ +#define RTC_PSCH_PRL ((uint16_t)0x000F) /* RTC Prescaler Reload Value High */ + +/******************* Bit definition for RTC_PRLL register *******************/ +#define RTC_PSCL_PRL ((uint16_t)0xFFFF) /* RTC Prescaler Reload Value Low */ + +/******************* Bit definition for RTC_DIVH register *******************/ +#define RTC_DIVH_RTC_DIV ((uint16_t)0x000F) /* RTC Clock Divider High */ + +/******************* Bit definition for RTC_DIVL register *******************/ +#define RTC_DIVL_RTC_DIV ((uint16_t)0xFFFF) /* RTC Clock Divider Low */ + +/******************* Bit definition for RTC_CNTH register *******************/ +#define RTC_CNTH_RTC_CNT ((uint16_t)0xFFFF) /* RTC Counter High */ + +/******************* Bit definition for RTC_CNTL register *******************/ +#define RTC_CNTL_RTC_CNT ((uint16_t)0xFFFF) /* RTC Counter Low */ + +/******************* Bit definition for RTC_ALRMH register *******************/ +#define RTC_ALRMH_RTC_ALRM ((uint16_t)0xFFFF) /* RTC Alarm High */ + +/******************* Bit definition for RTC_ALRML register *******************/ +#define RTC_ALRML_RTC_ALRM ((uint16_t)0xFFFF) /* RTC Alarm Low */ + +/******************************************************************************/ +/* Serial Peripheral Interface */ +/******************************************************************************/ + +/******************* Bit definition for SPI_CTLR1 register ********************/ +#define SPI_CTLR1_CPHA ((uint16_t)0x0001) /* Clock Phase */ +#define SPI_CTLR1_CPOL ((uint16_t)0x0002) /* Clock Polarity */ +#define SPI_CTLR1_MSTR ((uint16_t)0x0004) /* Master Selection */ + +#define SPI_CTLR1_BR ((uint16_t)0x0038) /* BR[2:0] bits (Baud Rate Control) */ +#define SPI_CTLR1_BR_0 ((uint16_t)0x0008) /* Bit 0 */ +#define SPI_CTLR1_BR_1 ((uint16_t)0x0010) /* Bit 1 */ +#define SPI_CTLR1_BR_2 ((uint16_t)0x0020) /* Bit 2 */ + +#define SPI_CTLR1_SPE ((uint16_t)0x0040) /* SPI Enable */ +#define SPI_CTLR1_LSBFIRST ((uint16_t)0x0080) /* Frame Format */ +#define SPI_CTLR1_SSI ((uint16_t)0x0100) /* Internal slave select */ +#define SPI_CTLR1_SSM ((uint16_t)0x0200) /* Software slave management */ +#define SPI_CTLR1_RXONLY ((uint16_t)0x0400) /* Receive only */ +#define SPI_CTLR1_DFF ((uint16_t)0x0800) /* Data Frame Format */ +#define SPI_CTLR1_CRCNEXT ((uint16_t)0x1000) /* Transmit CRC next */ +#define SPI_CTLR1_CRCEN ((uint16_t)0x2000) /* Hardware CRC calculation enable */ +#define SPI_CTLR1_BIDIOE ((uint16_t)0x4000) /* Output enable in bidirectional mode */ +#define SPI_CTLR1_BIDIMODE ((uint16_t)0x8000) /* Bidirectional data mode enable */ + +/******************* Bit definition for SPI_CTLR2 register ********************/ +#define SPI_CTLR2_RXDMAEN ((uint8_t)0x01) /* Rx Buffer DMA Enable */ +#define SPI_CTLR2_TXDMAEN ((uint8_t)0x02) /* Tx Buffer DMA Enable */ +#define SPI_CTLR2_SSOE ((uint8_t)0x04) /* SS Output Enable */ +#define SPI_CTLR2_ERRIE ((uint8_t)0x20) /* Error Interrupt Enable */ +#define SPI_CTLR2_RXNEIE ((uint8_t)0x40) /* RX buffer Not Empty Interrupt Enable */ +#define SPI_CTLR2_TXEIE ((uint8_t)0x80) /* Tx buffer Empty Interrupt Enable */ + +/******************** Bit definition for SPI_STATR register ********************/ +#define SPI_STATR_RXNE ((uint8_t)0x01) /* Receive buffer Not Empty */ +#define SPI_STATR_TXE ((uint8_t)0x02) /* Transmit buffer Empty */ +#define SPI_STATR_CHSIDE ((uint8_t)0x04) /* Channel side */ +#define SPI_STATR_UDR ((uint8_t)0x08) /* Underrun flag */ +#define SPI_STATR_CRCERR ((uint8_t)0x10) /* CRC Error flag */ +#define SPI_STATR_MODF ((uint8_t)0x20) /* Mode fault */ +#define SPI_STATR_OVR ((uint8_t)0x40) /* Overrun flag */ +#define SPI_STATR_BSY ((uint8_t)0x80) /* Busy flag */ + +/******************** Bit definition for SPI_DATAR register ********************/ +#define SPI_DATAR_DR ((uint16_t)0xFFFF) /* Data Register */ + +/******************* Bit definition for SPI_CRCR register ******************/ +#define SPI_CRCR_CRCPOLY ((uint16_t)0xFFFF) /* CRC polynomial register */ + +/****************** Bit definition for SPI_RCRCR register ******************/ +#define SPI_RCRCR_RXCRC ((uint16_t)0xFFFF) /* Rx CRC Register */ + +/****************** Bit definition for SPI_TCRCR register ******************/ +#define SPI_TCRCR_TXCRC ((uint16_t)0xFFFF) /* Tx CRC Register */ + +/****************** Bit definition for SPI_I2SCFGR register *****************/ +#define SPI_I2SCFGR_CHLEN ((uint16_t)0x0001) /* Channel length (number of bits per audio channel) */ + +#define SPI_I2SCFGR_DATLEN ((uint16_t)0x0006) /* DATLEN[1:0] bits (Data length to be transferred) */ +#define SPI_I2SCFGR_DATLEN_0 ((uint16_t)0x0002) /* Bit 0 */ +#define SPI_I2SCFGR_DATLEN_1 ((uint16_t)0x0004) /* Bit 1 */ + +#define SPI_I2SCFGR_CKPOL ((uint16_t)0x0008) /* steady state clock polarity */ + +#define SPI_I2SCFGR_I2SSTD ((uint16_t)0x0030) /* I2SSTD[1:0] bits (I2S standard selection) */ +#define SPI_I2SCFGR_I2SSTD_0 ((uint16_t)0x0010) /* Bit 0 */ +#define SPI_I2SCFGR_I2SSTD_1 ((uint16_t)0x0020) /* Bit 1 */ + +#define SPI_I2SCFGR_PCMSYNC ((uint16_t)0x0080) /* PCM frame synchronization */ + +#define SPI_I2SCFGR_I2SCFG ((uint16_t)0x0300) /* I2SCFG[1:0] bits (I2S configuration mode) */ +#define SPI_I2SCFGR_I2SCFG_0 ((uint16_t)0x0100) /* Bit 0 */ +#define SPI_I2SCFGR_I2SCFG_1 ((uint16_t)0x0200) /* Bit 1 */ + +#define SPI_I2SCFGR_I2SE ((uint16_t)0x0400) /* I2S Enable */ +#define SPI_I2SCFGR_I2SMOD ((uint16_t)0x0800) /* I2S mode selection */ + +/****************** Bit definition for SPI_I2SPR register *******************/ +#define SPI_I2SPR_I2SDIV ((uint16_t)0x00FF) /* I2S Linear prescaler */ +#define SPI_I2SPR_ODD ((uint16_t)0x0100) /* Odd factor for the prescaler */ +#define SPI_I2SPR_MCKOE ((uint16_t)0x0200) /* Master Clock Output Enable */ + +/******************************************************************************/ +/* TIM */ +/******************************************************************************/ + +/******************* Bit definition for TIM_CTLR1 register ********************/ +#define TIM_CEN ((uint16_t)0x0001) /* Counter enable */ +#define TIM_UDIS ((uint16_t)0x0002) /* Update disable */ +#define TIM_URS ((uint16_t)0x0004) /* Update request source */ +#define TIM_OPM ((uint16_t)0x0008) /* One pulse mode */ +#define TIM_DIR ((uint16_t)0x0010) /* Direction */ + +#define TIM_CMS ((uint16_t)0x0060) /* CMS[1:0] bits (Center-aligned mode selection) */ +#define TIM_CMS_0 ((uint16_t)0x0020) /* Bit 0 */ +#define TIM_CMS_1 ((uint16_t)0x0040) /* Bit 1 */ + +#define TIM_ARPE ((uint16_t)0x0080) /* Auto-reload preload enable */ + +#define TIM_CTLR1_CKD ((uint16_t)0x0300) /* CKD[1:0] bits (clock division) */ +#define TIM_CKD_0 ((uint16_t)0x0100) /* Bit 0 */ +#define TIM_CKD_1 ((uint16_t)0x0200) /* Bit 1 */ + +/******************* Bit definition for TIM_CTLR2 register ********************/ +#define TIM_CCPC ((uint16_t)0x0001) /* Capture/Compare Preloaded Control */ +#define TIM_CCUS ((uint16_t)0x0004) /* Capture/Compare Control Update Selection */ +#define TIM_CCDS ((uint16_t)0x0008) /* Capture/Compare DMA Selection */ + +#define TIM_MMS ((uint16_t)0x0070) /* MMS[2:0] bits (Master Mode Selection) */ +#define TIM_MMS_0 ((uint16_t)0x0010) /* Bit 0 */ +#define TIM_MMS_1 ((uint16_t)0x0020) /* Bit 1 */ +#define TIM_MMS_2 ((uint16_t)0x0040) /* Bit 2 */ + +#define TIM_TI1S ((uint16_t)0x0080) /* TI1 Selection */ +#define TIM_OIS1 ((uint16_t)0x0100) /* Output Idle state 1 (OC1 output) */ +#define TIM_OIS1N ((uint16_t)0x0200) /* Output Idle state 1 (OC1N output) */ +#define TIM_OIS2 ((uint16_t)0x0400) /* Output Idle state 2 (OC2 output) */ +#define TIM_OIS2N ((uint16_t)0x0800) /* Output Idle state 2 (OC2N output) */ +#define TIM_OIS3 ((uint16_t)0x1000) /* Output Idle state 3 (OC3 output) */ +#define TIM_OIS3N ((uint16_t)0x2000) /* Output Idle state 3 (OC3N output) */ +#define TIM_OIS4 ((uint16_t)0x4000) /* Output Idle state 4 (OC4 output) */ + +/******************* Bit definition for TIM_SMCFGR register *******************/ +#define TIM_SMS ((uint16_t)0x0007) /* SMS[2:0] bits (Slave mode selection) */ +#define TIM_SMS_0 ((uint16_t)0x0001) /* Bit 0 */ +#define TIM_SMS_1 ((uint16_t)0x0002) /* Bit 1 */ +#define TIM_SMS_2 ((uint16_t)0x0004) /* Bit 2 */ + +#define TIM_TS ((uint16_t)0x0070) /* TS[2:0] bits (Trigger selection) */ +#define TIM_TS_0 ((uint16_t)0x0010) /* Bit 0 */ +#define TIM_TS_1 ((uint16_t)0x0020) /* Bit 1 */ +#define TIM_TS_2 ((uint16_t)0x0040) /* Bit 2 */ + +#define TIM_MSM ((uint16_t)0x0080) /* Master/slave mode */ + +#define TIM_ETF ((uint16_t)0x0F00) /* ETF[3:0] bits (External trigger filter) */ +#define TIM_ETF_0 ((uint16_t)0x0100) /* Bit 0 */ +#define TIM_ETF_1 ((uint16_t)0x0200) /* Bit 1 */ +#define TIM_ETF_2 ((uint16_t)0x0400) /* Bit 2 */ +#define TIM_ETF_3 ((uint16_t)0x0800) /* Bit 3 */ + +#define TIM_ETPS ((uint16_t)0x3000) /* ETPS[1:0] bits (External trigger prescaler) */ +#define TIM_ETPS_0 ((uint16_t)0x1000) /* Bit 0 */ +#define TIM_ETPS_1 ((uint16_t)0x2000) /* Bit 1 */ + +#define TIM_ECE ((uint16_t)0x4000) /* External clock enable */ +#define TIM_ETP ((uint16_t)0x8000) /* External trigger polarity */ + +/******************* Bit definition for TIM_DMAINTENR register *******************/ +#define TIM_UIE ((uint16_t)0x0001) /* Update interrupt enable */ +#define TIM_CC1IE ((uint16_t)0x0002) /* Capture/Compare 1 interrupt enable */ +#define TIM_CC2IE ((uint16_t)0x0004) /* Capture/Compare 2 interrupt enable */ +#define TIM_CC3IE ((uint16_t)0x0008) /* Capture/Compare 3 interrupt enable */ +#define TIM_CC4IE ((uint16_t)0x0010) /* Capture/Compare 4 interrupt enable */ +#define TIM_COMIE ((uint16_t)0x0020) /* COM interrupt enable */ +#define TIM_TIE ((uint16_t)0x0040) /* Trigger interrupt enable */ +#define TIM_BIE ((uint16_t)0x0080) /* Break interrupt enable */ +#define TIM_UDE ((uint16_t)0x0100) /* Update DMA request enable */ +#define TIM_CC1DE ((uint16_t)0x0200) /* Capture/Compare 1 DMA request enable */ +#define TIM_CC2DE ((uint16_t)0x0400) /* Capture/Compare 2 DMA request enable */ +#define TIM_CC3DE ((uint16_t)0x0800) /* Capture/Compare 3 DMA request enable */ +#define TIM_CC4DE ((uint16_t)0x1000) /* Capture/Compare 4 DMA request enable */ +#define TIM_COMDE ((uint16_t)0x2000) /* COM DMA request enable */ +#define TIM_TDE ((uint16_t)0x4000) /* Trigger DMA request enable */ + +/******************** Bit definition for TIM_INTFR register ********************/ +#define TIM_UIF ((uint16_t)0x0001) /* Update interrupt Flag */ +#define TIM_CC1IF ((uint16_t)0x0002) /* Capture/Compare 1 interrupt Flag */ +#define TIM_CC2IF ((uint16_t)0x0004) /* Capture/Compare 2 interrupt Flag */ +#define TIM_CC3IF ((uint16_t)0x0008) /* Capture/Compare 3 interrupt Flag */ +#define TIM_CC4IF ((uint16_t)0x0010) /* Capture/Compare 4 interrupt Flag */ +#define TIM_COMIF ((uint16_t)0x0020) /* COM interrupt Flag */ +#define TIM_TIF ((uint16_t)0x0040) /* Trigger interrupt Flag */ +#define TIM_BIF ((uint16_t)0x0080) /* Break interrupt Flag */ +#define TIM_CC1OF ((uint16_t)0x0200) /* Capture/Compare 1 Overcapture Flag */ +#define TIM_CC2OF ((uint16_t)0x0400) /* Capture/Compare 2 Overcapture Flag */ +#define TIM_CC3OF ((uint16_t)0x0800) /* Capture/Compare 3 Overcapture Flag */ +#define TIM_CC4OF ((uint16_t)0x1000) /* Capture/Compare 4 Overcapture Flag */ + +/******************* Bit definition for TIM_SWEVGR register ********************/ +#define TIM_UG ((uint8_t)0x01) /* Update Generation */ +#define TIM_CC1G ((uint8_t)0x02) /* Capture/Compare 1 Generation */ +#define TIM_CC2G ((uint8_t)0x04) /* Capture/Compare 2 Generation */ +#define TIM_CC3G ((uint8_t)0x08) /* Capture/Compare 3 Generation */ +#define TIM_CC4G ((uint8_t)0x10) /* Capture/Compare 4 Generation */ +#define TIM_COMG ((uint8_t)0x20) /* Capture/Compare Control Update Generation */ +#define TIM_TG ((uint8_t)0x40) /* Trigger Generation */ +#define TIM_BG ((uint8_t)0x80) /* Break Generation */ + +/****************** Bit definition for TIM_CHCTLR1 register *******************/ +#define TIM_CC1S ((uint16_t)0x0003) /* CC1S[1:0] bits (Capture/Compare 1 Selection) */ +#define TIM_CC1S_0 ((uint16_t)0x0001) /* Bit 0 */ +#define TIM_CC1S_1 ((uint16_t)0x0002) /* Bit 1 */ + +#define TIM_OC1FE ((uint16_t)0x0004) /* Output Compare 1 Fast enable */ +#define TIM_OC1PE ((uint16_t)0x0008) /* Output Compare 1 Preload enable */ + +#define TIM_OC1M ((uint16_t)0x0070) /* OC1M[2:0] bits (Output Compare 1 Mode) */ +#define TIM_OC1M_0 ((uint16_t)0x0010) /* Bit 0 */ +#define TIM_OC1M_1 ((uint16_t)0x0020) /* Bit 1 */ +#define TIM_OC1M_2 ((uint16_t)0x0040) /* Bit 2 */ + +#define TIM_OC1CE ((uint16_t)0x0080) /* Output Compare 1Clear Enable */ + +#define TIM_CC2S ((uint16_t)0x0300) /* CC2S[1:0] bits (Capture/Compare 2 Selection) */ +#define TIM_CC2S_0 ((uint16_t)0x0100) /* Bit 0 */ +#define TIM_CC2S_1 ((uint16_t)0x0200) /* Bit 1 */ + +#define TIM_OC2FE ((uint16_t)0x0400) /* Output Compare 2 Fast enable */ +#define TIM_OC2PE ((uint16_t)0x0800) /* Output Compare 2 Preload enable */ + +#define TIM_OC2M ((uint16_t)0x7000) /* OC2M[2:0] bits (Output Compare 2 Mode) */ +#define TIM_OC2M_0 ((uint16_t)0x1000) /* Bit 0 */ +#define TIM_OC2M_1 ((uint16_t)0x2000) /* Bit 1 */ +#define TIM_OC2M_2 ((uint16_t)0x4000) /* Bit 2 */ + +#define TIM_OC2CE ((uint16_t)0x8000) /* Output Compare 2 Clear Enable */ + +#define TIM_IC1PSC ((uint16_t)0x000C) /* IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ +#define TIM_IC1PSC_0 ((uint16_t)0x0004) /* Bit 0 */ +#define TIM_IC1PSC_1 ((uint16_t)0x0008) /* Bit 1 */ + +#define TIM_IC1F ((uint16_t)0x00F0) /* IC1F[3:0] bits (Input Capture 1 Filter) */ +#define TIM_IC1F_0 ((uint16_t)0x0010) /* Bit 0 */ +#define TIM_IC1F_1 ((uint16_t)0x0020) /* Bit 1 */ +#define TIM_IC1F_2 ((uint16_t)0x0040) /* Bit 2 */ +#define TIM_IC1F_3 ((uint16_t)0x0080) /* Bit 3 */ + +#define TIM_IC2PSC ((uint16_t)0x0C00) /* IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ +#define TIM_IC2PSC_0 ((uint16_t)0x0400) /* Bit 0 */ +#define TIM_IC2PSC_1 ((uint16_t)0x0800) /* Bit 1 */ + +#define TIM_IC2F ((uint16_t)0xF000) /* IC2F[3:0] bits (Input Capture 2 Filter) */ +#define TIM_IC2F_0 ((uint16_t)0x1000) /* Bit 0 */ +#define TIM_IC2F_1 ((uint16_t)0x2000) /* Bit 1 */ +#define TIM_IC2F_2 ((uint16_t)0x4000) /* Bit 2 */ +#define TIM_IC2F_3 ((uint16_t)0x8000) /* Bit 3 */ + +/****************** Bit definition for TIM_CHCTLR2 register *******************/ +#define TIM_CC3S ((uint16_t)0x0003) /* CC3S[1:0] bits (Capture/Compare 3 Selection) */ +#define TIM_CC3S_0 ((uint16_t)0x0001) /* Bit 0 */ +#define TIM_CC3S_1 ((uint16_t)0x0002) /* Bit 1 */ + +#define TIM_OC3FE ((uint16_t)0x0004) /* Output Compare 3 Fast enable */ +#define TIM_OC3PE ((uint16_t)0x0008) /* Output Compare 3 Preload enable */ + +#define TIM_OC3M ((uint16_t)0x0070) /* OC3M[2:0] bits (Output Compare 3 Mode) */ +#define TIM_OC3M_0 ((uint16_t)0x0010) /* Bit 0 */ +#define TIM_OC3M_1 ((uint16_t)0x0020) /* Bit 1 */ +#define TIM_OC3M_2 ((uint16_t)0x0040) /* Bit 2 */ + +#define TIM_OC3CE ((uint16_t)0x0080) /* Output Compare 3 Clear Enable */ + +#define TIM_CC4S ((uint16_t)0x0300) /* CC4S[1:0] bits (Capture/Compare 4 Selection) */ +#define TIM_CC4S_0 ((uint16_t)0x0100) /* Bit 0 */ +#define TIM_CC4S_1 ((uint16_t)0x0200) /* Bit 1 */ + +#define TIM_OC4FE ((uint16_t)0x0400) /* Output Compare 4 Fast enable */ +#define TIM_OC4PE ((uint16_t)0x0800) /* Output Compare 4 Preload enable */ + +#define TIM_OC4M ((uint16_t)0x7000) /* OC4M[2:0] bits (Output Compare 4 Mode) */ +#define TIM_OC4M_0 ((uint16_t)0x1000) /* Bit 0 */ +#define TIM_OC4M_1 ((uint16_t)0x2000) /* Bit 1 */ +#define TIM_OC4M_2 ((uint16_t)0x4000) /* Bit 2 */ + +#define TIM_OC4CE ((uint16_t)0x8000) /* Output Compare 4 Clear Enable */ + +#define TIM_IC3PSC ((uint16_t)0x000C) /* IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ +#define TIM_IC3PSC_0 ((uint16_t)0x0004) /* Bit 0 */ +#define TIM_IC3PSC_1 ((uint16_t)0x0008) /* Bit 1 */ + +#define TIM_IC3F ((uint16_t)0x00F0) /* IC3F[3:0] bits (Input Capture 3 Filter) */ +#define TIM_IC3F_0 ((uint16_t)0x0010) /* Bit 0 */ +#define TIM_IC3F_1 ((uint16_t)0x0020) /* Bit 1 */ +#define TIM_IC3F_2 ((uint16_t)0x0040) /* Bit 2 */ +#define TIM_IC3F_3 ((uint16_t)0x0080) /* Bit 3 */ + +#define TIM_IC4PSC ((uint16_t)0x0C00) /* IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ +#define TIM_IC4PSC_0 ((uint16_t)0x0400) /* Bit 0 */ +#define TIM_IC4PSC_1 ((uint16_t)0x0800) /* Bit 1 */ + +#define TIM_IC4F ((uint16_t)0xF000) /* IC4F[3:0] bits (Input Capture 4 Filter) */ +#define TIM_IC4F_0 ((uint16_t)0x1000) /* Bit 0 */ +#define TIM_IC4F_1 ((uint16_t)0x2000) /* Bit 1 */ +#define TIM_IC4F_2 ((uint16_t)0x4000) /* Bit 2 */ +#define TIM_IC4F_3 ((uint16_t)0x8000) /* Bit 3 */ + +/******************* Bit definition for TIM_CCER register *******************/ +#define TIM_CC1E ((uint16_t)0x0001) /* Capture/Compare 1 output enable */ +#define TIM_CC1P ((uint16_t)0x0002) /* Capture/Compare 1 output Polarity */ +#define TIM_CC1NE ((uint16_t)0x0004) /* Capture/Compare 1 Complementary output enable */ +#define TIM_CC1NP ((uint16_t)0x0008) /* Capture/Compare 1 Complementary output Polarity */ +#define TIM_CC2E ((uint16_t)0x0010) /* Capture/Compare 2 output enable */ +#define TIM_CC2P ((uint16_t)0x0020) /* Capture/Compare 2 output Polarity */ +#define TIM_CC2NE ((uint16_t)0x0040) /* Capture/Compare 2 Complementary output enable */ +#define TIM_CC2NP ((uint16_t)0x0080) /* Capture/Compare 2 Complementary output Polarity */ +#define TIM_CC3E ((uint16_t)0x0100) /* Capture/Compare 3 output enable */ +#define TIM_CC3P ((uint16_t)0x0200) /* Capture/Compare 3 output Polarity */ +#define TIM_CC3NE ((uint16_t)0x0400) /* Capture/Compare 3 Complementary output enable */ +#define TIM_CC3NP ((uint16_t)0x0800) /* Capture/Compare 3 Complementary output Polarity */ +#define TIM_CC4E ((uint16_t)0x1000) /* Capture/Compare 4 output enable */ +#define TIM_CC4P ((uint16_t)0x2000) /* Capture/Compare 4 output Polarity */ +#define TIM_CC4NP ((uint16_t)0x8000) /* Capture/Compare 4 Complementary output Polarity */ + +/******************* Bit definition for TIM_CNT register ********************/ +#define TIM_CNT ((uint16_t)0xFFFF) /* Counter Value */ + +/******************* Bit definition for TIM_PSC register ********************/ +#define TIM_PSC ((uint16_t)0xFFFF) /* Prescaler Value */ + +/******************* Bit definition for TIM_ATRLR register ********************/ +#define TIM_ARR ((uint16_t)0xFFFF) /* actual auto-reload Value */ + +/******************* Bit definition for TIM_RPTCR register ********************/ +#define TIM_REP ((uint8_t)0xFF) /* Repetition Counter Value */ + +/******************* Bit definition for TIM_CH1CVR register *******************/ +#define TIM_CCR1 ((uint16_t)0xFFFF) /* Capture/Compare 1 Value */ + +/******************* Bit definition for TIM_CH2CVR register *******************/ +#define TIM_CCR2 ((uint16_t)0xFFFF) /* Capture/Compare 2 Value */ + +/******************* Bit definition for TIM_CH3CVR register *******************/ +#define TIM_CCR3 ((uint16_t)0xFFFF) /* Capture/Compare 3 Value */ + +/******************* Bit definition for TIM_CH4CVR register *******************/ +#define TIM_CCR4 ((uint16_t)0xFFFF) /* Capture/Compare 4 Value */ + +/******************* Bit definition for TIM_BDTR register *******************/ +#define TIM_DTG ((uint16_t)0x00FF) /* DTG[0:7] bits (Dead-Time Generator set-up) */ +#define TIM_DTG_0 ((uint16_t)0x0001) /* Bit 0 */ +#define TIM_DTG_1 ((uint16_t)0x0002) /* Bit 1 */ +#define TIM_DTG_2 ((uint16_t)0x0004) /* Bit 2 */ +#define TIM_DTG_3 ((uint16_t)0x0008) /* Bit 3 */ +#define TIM_DTG_4 ((uint16_t)0x0010) /* Bit 4 */ +#define TIM_DTG_5 ((uint16_t)0x0020) /* Bit 5 */ +#define TIM_DTG_6 ((uint16_t)0x0040) /* Bit 6 */ +#define TIM_DTG_7 ((uint16_t)0x0080) /* Bit 7 */ + +#define TIM_LOCK ((uint16_t)0x0300) /* LOCK[1:0] bits (Lock Configuration) */ +#define TIM_LOCK_0 ((uint16_t)0x0100) /* Bit 0 */ +#define TIM_LOCK_1 ((uint16_t)0x0200) /* Bit 1 */ + +#define TIM_OSSI ((uint16_t)0x0400) /* Off-State Selection for Idle mode */ +#define TIM_OSSR ((uint16_t)0x0800) /* Off-State Selection for Run mode */ +#define TIM_BKE ((uint16_t)0x1000) /* Break enable */ +#define TIM_BKP ((uint16_t)0x2000) /* Break Polarity */ +#define TIM_AOE ((uint16_t)0x4000) /* Automatic Output enable */ +#define TIM_MOE ((uint16_t)0x8000) /* Main Output enable */ + +/******************* Bit definition for TIM_DMACFGR register ********************/ +#define TIM_DBA ((uint16_t)0x001F) /* DBA[4:0] bits (DMA Base Address) */ +#define TIM_DBA_0 ((uint16_t)0x0001) /* Bit 0 */ +#define TIM_DBA_1 ((uint16_t)0x0002) /* Bit 1 */ +#define TIM_DBA_2 ((uint16_t)0x0004) /* Bit 2 */ +#define TIM_DBA_3 ((uint16_t)0x0008) /* Bit 3 */ +#define TIM_DBA_4 ((uint16_t)0x0010) /* Bit 4 */ + +#define TIM_DBL ((uint16_t)0x1F00) /* DBL[4:0] bits (DMA Burst Length) */ +#define TIM_DBL_0 ((uint16_t)0x0100) /* Bit 0 */ +#define TIM_DBL_1 ((uint16_t)0x0200) /* Bit 1 */ +#define TIM_DBL_2 ((uint16_t)0x0400) /* Bit 2 */ +#define TIM_DBL_3 ((uint16_t)0x0800) /* Bit 3 */ +#define TIM_DBL_4 ((uint16_t)0x1000) /* Bit 4 */ + +/******************* Bit definition for TIM_DMAADR register *******************/ +#define TIM_DMAR_DMAB ((uint16_t)0xFFFF) /* DMA register for burst accesses */ + +/******************************************************************************/ +/* Universal Synchronous Asynchronous Receiver Transmitter */ +/******************************************************************************/ + +/******************* Bit definition for USART_STATR register *******************/ +#define USART_STATR_PE ((uint16_t)0x0001) /* Parity Error */ +#define USART_STATR_FE ((uint16_t)0x0002) /* Framing Error */ +#define USART_STATR_NE ((uint16_t)0x0004) /* Noise Error Flag */ +#define USART_STATR_ORE ((uint16_t)0x0008) /* OverRun Error */ +#define USART_STATR_IDLE ((uint16_t)0x0010) /* IDLE line detected */ +#define USART_STATR_RXNE ((uint16_t)0x0020) /* Read Data Register Not Empty */ +#define USART_STATR_TC ((uint16_t)0x0040) /* Transmission Complete */ +#define USART_STATR_TXE ((uint16_t)0x0080) /* Transmit Data Register Empty */ +#define USART_STATR_LBD ((uint16_t)0x0100) /* LIN Break Detection Flag */ +#define USART_STATR_CTS ((uint16_t)0x0200) /* CTS Flag */ + +/******************* Bit definition for USART_DATAR register *******************/ +#define USART_DATAR_DR ((uint16_t)0x01FF) /* Data value */ + +/****************** Bit definition for USART_BRR register *******************/ +#define USART_BRR_DIV_Fraction ((uint16_t)0x000F) /* Fraction of USARTDIV */ +#define USART_BRR_DIV_Mantissa ((uint16_t)0xFFF0) /* Mantissa of USARTDIV */ + +/****************** Bit definition for USART_CTLR1 register *******************/ +#define USART_CTLR1_SBK ((uint16_t)0x0001) /* Send Break */ +#define USART_CTLR1_RWU ((uint16_t)0x0002) /* Receiver wakeup */ +#define USART_CTLR1_RE ((uint16_t)0x0004) /* Receiver Enable */ +#define USART_CTLR1_TE ((uint16_t)0x0008) /* Transmitter Enable */ +#define USART_CTLR1_IDLEIE ((uint16_t)0x0010) /* IDLE Interrupt Enable */ +#define USART_CTLR1_RXNEIE ((uint16_t)0x0020) /* RXNE Interrupt Enable */ +#define USART_CTLR1_TCIE ((uint16_t)0x0040) /* Transmission Complete Interrupt Enable */ +#define USART_CTLR1_TXEIE ((uint16_t)0x0080) /* PE Interrupt Enable */ +#define USART_CTLR1_PEIE ((uint16_t)0x0100) /* PE Interrupt Enable */ +#define USART_CTLR1_PS ((uint16_t)0x0200) /* Parity Selection */ +#define USART_CTLR1_PCE ((uint16_t)0x0400) /* Parity Control Enable */ +#define USART_CTLR1_WAKE ((uint16_t)0x0800) /* Wakeup method */ +#define USART_CTLR1_M ((uint16_t)0x1000) /* Word length */ +#define USART_CTLR1_UE ((uint16_t)0x2000) /* USART Enable */ +#define USART_CTLR1_OVER8 ((uint16_t)0x8000) /* USART Oversmapling 8-bits */ + +/****************** Bit definition for USART_CTLR2 register *******************/ +#define USART_CTLR2_ADD ((uint16_t)0x000F) /* Address of the USART node */ +#define USART_CTLR2_LBDL ((uint16_t)0x0020) /* LIN Break Detection Length */ +#define USART_CTLR2_LBDIE ((uint16_t)0x0040) /* LIN Break Detection Interrupt Enable */ +#define USART_CTLR2_LBCL ((uint16_t)0x0100) /* Last Bit Clock pulse */ +#define USART_CTLR2_CPHA ((uint16_t)0x0200) /* Clock Phase */ +#define USART_CTLR2_CPOL ((uint16_t)0x0400) /* Clock Polarity */ +#define USART_CTLR2_CLKEN ((uint16_t)0x0800) /* Clock Enable */ + +#define USART_CTLR2_STOP ((uint16_t)0x3000) /* STOP[1:0] bits (STOP bits) */ +#define USART_CTLR2_STOP_0 ((uint16_t)0x1000) /* Bit 0 */ +#define USART_CTLR2_STOP_1 ((uint16_t)0x2000) /* Bit 1 */ + +#define USART_CTLR2_LINEN ((uint16_t)0x4000) /* LIN mode enable */ + +/****************** Bit definition for USART_CTLR3 register *******************/ +#define USART_CTLR3_EIE ((uint16_t)0x0001) /* Error Interrupt Enable */ +#define USART_CTLR3_IREN ((uint16_t)0x0002) /* IrDA mode Enable */ +#define USART_CTLR3_IRLP ((uint16_t)0x0004) /* IrDA Low-Power */ +#define USART_CTLR3_HDSEL ((uint16_t)0x0008) /* Half-Duplex Selection */ +#define USART_CTLR3_NACK ((uint16_t)0x0010) /* Smartcard NACK enable */ +#define USART_CTLR3_SCEN ((uint16_t)0x0020) /* Smartcard mode enable */ +#define USART_CTLR3_DMAR ((uint16_t)0x0040) /* DMA Enable Receiver */ +#define USART_CTLR3_DMAT ((uint16_t)0x0080) /* DMA Enable Transmitter */ +#define USART_CTLR3_RTSE ((uint16_t)0x0100) /* RTS Enable */ +#define USART_CTLR3_CTSE ((uint16_t)0x0200) /* CTS Enable */ +#define USART_CTLR3_CTSIE ((uint16_t)0x0400) /* CTS Interrupt Enable */ +#define USART_CTLR3_ONEBIT ((uint16_t)0x0800) /* One Bit method */ + +/****************** Bit definition for USART_GPR register ******************/ +#define USART_GPR_PSC ((uint16_t)0x00FF) /* PSC[7:0] bits (Prescaler value) */ +#define USART_GPR_PSC_0 ((uint16_t)0x0001) /* Bit 0 */ +#define USART_GPR_PSC_1 ((uint16_t)0x0002) /* Bit 1 */ +#define USART_GPR_PSC_2 ((uint16_t)0x0004) /* Bit 2 */ +#define USART_GPR_PSC_3 ((uint16_t)0x0008) /* Bit 3 */ +#define USART_GPR_PSC_4 ((uint16_t)0x0010) /* Bit 4 */ +#define USART_GPR_PSC_5 ((uint16_t)0x0020) /* Bit 5 */ +#define USART_GPR_PSC_6 ((uint16_t)0x0040) /* Bit 6 */ +#define USART_GPR_PSC_7 ((uint16_t)0x0080) /* Bit 7 */ + +#define USART_GPR_GT ((uint16_t)0xFF00) /* Guard time value */ + +/******************************************************************************/ +/* Window WATCHDOG */ +/******************************************************************************/ + +/******************* Bit definition for WWDG_CTLR register ********************/ +#define WWDG_CTLR_T ((uint8_t)0x7F) /* T[6:0] bits (7-Bit counter (MSB to LSB)) */ +#define WWDG_CTLR_T0 ((uint8_t)0x01) /* Bit 0 */ +#define WWDG_CTLR_T1 ((uint8_t)0x02) /* Bit 1 */ +#define WWDG_CTLR_T2 ((uint8_t)0x04) /* Bit 2 */ +#define WWDG_CTLR_T3 ((uint8_t)0x08) /* Bit 3 */ +#define WWDG_CTLR_T4 ((uint8_t)0x10) /* Bit 4 */ +#define WWDG_CTLR_T5 ((uint8_t)0x20) /* Bit 5 */ +#define WWDG_CTLR_T6 ((uint8_t)0x40) /* Bit 6 */ + +#define WWDG_CTLR_WDGA ((uint8_t)0x80) /* Activation bit */ + +/******************* Bit definition for WWDG_CFGR register *******************/ +#define WWDG_CFGR_W ((uint16_t)0x007F) /* W[6:0] bits (7-bit window value) */ +#define WWDG_CFGR_W0 ((uint16_t)0x0001) /* Bit 0 */ +#define WWDG_CFGR_W1 ((uint16_t)0x0002) /* Bit 1 */ +#define WWDG_CFGR_W2 ((uint16_t)0x0004) /* Bit 2 */ +#define WWDG_CFGR_W3 ((uint16_t)0x0008) /* Bit 3 */ +#define WWDG_CFGR_W4 ((uint16_t)0x0010) /* Bit 4 */ +#define WWDG_CFGR_W5 ((uint16_t)0x0020) /* Bit 5 */ +#define WWDG_CFGR_W6 ((uint16_t)0x0040) /* Bit 6 */ + +#define WWDG_CFGR_WDGTB ((uint16_t)0x0180) /* WDGTB[1:0] bits (Timer Base) */ +#define WWDG_CFGR_WDGTB0 ((uint16_t)0x0080) /* Bit 0 */ +#define WWDG_CFGR_WDGTB1 ((uint16_t)0x0100) /* Bit 1 */ + +#define WWDG_CFGR_EWI ((uint16_t)0x0200) /* Early Wakeup Interrupt */ + +/******************* Bit definition for WWDG_STATR register ********************/ +#define WWDG_STATR_EWIF ((uint8_t)0x01) /* Early Wakeup Interrupt Flag */ + +/******************************************************************************/ +/* ENHANCED FUNNCTION */ +/******************************************************************************/ + +/**************************** Enhanced register *****************************/ +#define EXTEN_USBD_LS ((uint32_t)0x00000001) /* Bit 0 */ +#define EXTEN_USBD_PU_EN ((uint32_t)0x00000002) /* Bit 1 */ +#define EXTEN_ETH_10M_EN ((uint32_t)0x00000004) /* Bit 2 */ +#define EXTEN_PLL_HSI_PRE ((uint32_t)0x00000010) /* Bit 4 */ +#define EXTEN_LOCKUP_EN ((uint32_t)0x00000040) /* Bit 5 */ +#define EXTEN_LOCKUP_RSTF ((uint32_t)0x00000080) /* Bit 7 */ + +#define EXTEN_ULLDO_TRIM ((uint32_t)0x00000300) /* ULLDO_TRIM[1:0] bits */ +#define EXTEN_ULLDO_TRIM0 ((uint32_t)0x00000100) /* Bit 0 */ +#define EXTEN_ULLDO_TRIM1 ((uint32_t)0x00000200) /* Bit 1 */ + +#define EXTEN_LDO_TRIM ((uint32_t)0x00000C00) /* LDO_TRIM[1:0] bits */ +#define EXTEN_LDO_TRIM0 ((uint32_t)0x00000400) /* Bit 0 */ +#define EXTEN_LDO_TRIM1 ((uint32_t)0x00000800) /* Bit 1 */ + +/******************************************************************************/ +/* DVP */ +/******************************************************************************/ + +/******************* Bit definition for DVP_CR0 register ********************/ +#define RB_DVP_ENABLE 0x01 // RW, DVP enable +#define RB_DVP_V_POLAR 0x02 // RW, DVP VSYNC polarity control: 1 = invert, 0 = not invert +#define RB_DVP_H_POLAR 0x04 // RW, DVP HSYNC polarity control: 1 = invert, 0 = not invert +#define RB_DVP_P_POLAR 0x08 // RW, DVP PCLK polarity control: 1 = invert, 0 = not invert +#define RB_DVP_MSK_DAT_MOD 0x30 +#define RB_DVP_D8_MOD 0x00 // RW, DVP 8bits data mode +#define RB_DVP_D10_MOD 0x10 // RW, DVP 10bits data mode +#define RB_DVP_D12_MOD 0x20 // RW, DVP 12bits data mode +#define RB_DVP_JPEG 0x40 // RW, DVP JPEG mode + +/******************* Bit definition for DVP_CR1 register ********************/ +#define RB_DVP_DMA_EN 0x01 // RW, DVP dma enable +#define RB_DVP_ALL_CLR 0x02 // RW, DVP all clear, high action +#define RB_DVP_RCV_CLR 0x04 // RW, DVP receive logic clear, high action +#define RB_DVP_BUF_TOG 0x08 // RW, DVP bug toggle by software, write 1 to toggle, ignored writing 0 +#define RB_DVP_CM 0x10 // RW, DVP capture mode +#define RB_DVP_CROP 0x20 // RW, DVP Crop feature enable +#define RB_DVP_FCRC 0xC0 // RW, DVP frame capture rate control: +#define DVP_RATE_100P 0x00 //00 = every frame captured (100%) +#define DVP_RATE_50P 0x40 //01 = every alternate frame captured (50%) +#define DVP_RATE_25P 0x80 //10 = one frame in four frame captured (25%) + +/******************* Bit definition for DVP_IER register ********************/ +#define RB_DVP_IE_STR_FRM 0x01 // RW, DVP frame start interrupt enable +#define RB_DVP_IE_ROW_DONE 0x02 // RW, DVP row received done interrupt enable +#define RB_DVP_IE_FRM_DONE 0x04 // RW, DVP frame received done interrupt enable +#define RB_DVP_IE_FIFO_OV 0x08 // RW, DVP receive fifo overflow interrupt enable +#define RB_DVP_IE_STP_FRM 0x10 // RW, DVP frame stop interrupt enable + +/******************* Bit definition for DVP_IFR register ********************/ +#define RB_DVP_IF_STR_FRM 0x01 // RW1, interrupt flag for DVP frame start +#define RB_DVP_IF_ROW_DONE 0x02 // RW1, interrupt flag for DVP row receive done +#define RB_DVP_IF_FRM_DONE 0x04 // RW1, interrupt flag for DVP frame receive done +#define RB_DVP_IF_FIFO_OV 0x08 // RW1, interrupt flag for DVP receive fifo overflow +#define RB_DVP_IF_STP_FRM 0x10 // RW1, interrupt flag for DVP frame stop + +/******************* Bit definition for DVP_STATUS register ********************/ +#define RB_DVP_FIFO_RDY 0x01 // RO, DVP receive fifo ready +#define RB_DVP_FIFO_FULL 0x02 // RO, DVP receive fifo full +#define RB_DVP_FIFO_OV 0x04 // RO, DVP receive fifo overflow +#define RB_DVP_MSK_FIFO_CNT 0x70 // RO, DVP receive fifo count + + +/******************************************************************************/ +/* ETH10M */ +/******************************************************************************/ +/* ETH register */ +#define R8_ETH_EIE (*((volatile uint8_t *)(0x40028000+3))) /* Interrupt Enable Register */ +#define RB_ETH_EIE_INTIE 0x80 /* RW interrupt enable*/ +#define RB_ETH_EIE_RXIE 0x40 /* RW Receive complete interrupt enable */ +#define RB_ETH_EIE_LINKIE 0x10 /* RW Link Change Interrupt Enable */ +#define RB_ETH_EIE_TXIE 0x08 /* RW send complete interrupt enable */ +#define RB_ETH_EIE_R_EN50 0x04 /* RW TX 50�� resistor adjustment. 1: On-chip 50�� connected 0: On-chip 50�� disconnected */ +#define RB_ETH_EIE_TXERIE 0x02 /* RW Transmit Error Interrupt Enable */ +#define RB_ETH_EIE_RXERIE 0x01 /* RW1 receive error flag */ +#define R8_ETH_EIR (*((volatile uint8_t *)(0x40028000+4))) /* Interrupt Flag Register */ +#define RB_ETH_EIR_RXIF 0x40 /* RW1 Receive complete flag */ +#define RB_ETH_EIR_LINKIF 0x10 /* RW1 Link Change Flag */ +#define RB_ETH_EIR_TXIF 0x08 /* RW1 Link Change Flag */ +#define RB_ETH_EIR_TXERIF 0x02 /* RW1 send error flag */ +#define RB_ETH_EIR_RXERIF 0x01 /* RW1 receive error flag */ +#define R8_ETH_ESTAT (*((volatile uint8_t *)(0x40028000+5))) /* status register */ +#define RB_ETH_ESTAT_INT 0x80 /* RW1 interrupt */ +#define RB_ETH_ESTAT_BUFER 0x40 /* RW1 Buffer error */ +#define RB_ETH_ESTAT_RXCRCER 0x20 /* RO receive crc error */ +#define RB_ETH_ESTAT_RXNIBBLE 0x10 /* RO receives nibble error */ +#define RB_ETH_ESTAT_RXMORE 0x08 /* RO receives more than maximum packets */ +#define RB_ETH_ESTAT_RXBUSY 0x04 /* RO receive busy */ +#define RB_ETH_ESTAT_TXABRT 0x02 /* RO send interrupted by mcu */ +#define R8_ETH_ECON2 (*((volatile uint8_t *)(0x40028000+6))) /* ETH PHY Analog Block Control Register */ +#define RB_ETH_ECON2_RX 0x0E /* 011b must be written */ +#define RB_ETH_ECON2_TX 0x01 +#define RB_ETH_ECON2_MUST 0x06 /* 011b must be written */ +#define R8_ETH_ECON1 (*((volatile uint8_t *)(0x40028000+7))) /* Transceiver Control Register */ +#define RB_ETH_ECON1_TXRST 0x80 /* RW Send module reset */ +#define RB_ETH_ECON1_RXRST 0x40 /* RW Receiver module reset */ +#define RB_ETH_ECON1_TXRTS 0x08 /* RW The transmission starts, and it is automatically cleared after the transmission is completed. */ +#define RB_ETH_ECON1_RXEN 0x04 /* RW Receive is enabled, when cleared, the error flag RXERIF will change to 1 if it is receiving */ + +#define R32_ETH_TX (*((volatile uint32_t *)(0x40028000+8))) /* send control */ +#define R16_ETH_ETXST (*((volatile uint16_t *)(0x40028000+8))) /* RW Send DMA buffer start address */ +#define R16_ETH_ETXLN (*((volatile uint16_t *)(0x40028000+0xA))) /* RW send length */ +#define R32_ETH_RX (*((volatile uint32_t *)(0x40028000+0xC))) /* receive control */ +#define R16_ETH_ERXST (*((volatile uint16_t *)(0x40028000+0xC))) /* RW Receive DMA buffer start address */ +#define R16_ETH_ERXLN (*((volatile uint16_t *)(0x40028000+0xE))) /* RO receive length */ + +#define R32_ETH_HTL (*((volatile uint32_t *)(0x40028000+0x10))) +#define R8_ETH_EHT0 (*((volatile uint8_t *)(0x40028000+0x10))) /* RW Hash Table Byte0 */ +#define R8_ETH_EHT1 (*((volatile uint8_t *)(0x40028000+0x11))) /* RW Hash Table Byte1 */ +#define R8_ETH_EHT2 (*((volatile uint8_t *)(0x40028000+0x12))) /* RW Hash Table Byte2 */ +#define R8_ETH_EHT3 (*((volatile uint8_t *)(0x40028000+0x13))) /* RW Hash Table Byte3 */ +#define R32_ETH_HTH (*((volatile uint32_t *)(0x40028000+0x14))) +#define R8_ETH_EHT4 (*((volatile uint8_t *)(0x40028000+0x14))) /* RW Hash Table Byte4 */ +#define R8_ETH_EHT5 (*((volatile uint8_t *)(0x40028000+0x15))) /* RW Hash Table Byte5 */ +#define R8_ETH_EHT6 (*((volatile uint8_t *)(0x40028000+0x16))) /* RW Hash Table Byte6 */ +#define R8_ETH_EHT7 (*((volatile uint8_t *)(0x40028000+0x17))) /* RW Hash Table Byte7 */ + +#define R32_ETH_MACON (*((volatile uint32_t *)(0x40028000+0x18))) +#define R8_ETH_ERXFCON (*((volatile uint8_t *)(0x40028000+0x18))) /* Received Packet Filtering Control Register */ +/* RW 0=Do not enable this filter condition, 1=When ANDOR=1, +target address mismatch will be filtered, when ANDOR=0, target address match will be accepted */ +#define RB_ETH_ERXFCON_UCEN 0x80 +#define RB_ETH_ERXFCON_CRCEN 0x20 +#define RB_ETH_ERXFCON_EN 0x10 +#define RB_ETH_ERXFCON_MPEN 0x08 +#define RB_ETH_ERXFCON_HTEN 0x04 +#define RB_ETH_ERXFCON_MCEN 0x02 +#define RB_ETH_ERXFCON_BCEN 0x01 +#define R8_ETH_MACON1 (*((volatile uint8_t *)(0x40028000+0x19))) /* Mac flow control registers */ +/* RW When FULDPX=0 is invalid, when FULDPX=1, 11=send 0 timer pause frame, +then stop sending, 10=send pause frame periodically, 01=send pause frame once, then stop sending, 00=stop sending pause frame */ +#define RB_ETH_MACON1_FCEN 0x30 +#define RB_ETH_MACON1_TXPAUS 0x08 /* RW Send pause frame enable*/ +#define RB_ETH_MACON1_RXPAUS 0x04 /* RW Receive pause frame enable */ +#define RB_ETH_MACON1_PASSALL 0x02 /* RW 1=Unfiltered control frames will be written to the buffer, 0=Control frames will be filtered */ +#define RB_ETH_MACON1_MARXEN 0x01 /* RW MAC layer receive enable */ +#define R8_ETH_MACON2 (*((volatile uint8_t *)(0x40028000+0x1A))) /* Mac Layer Packet Control Register */ +#define RB_ETH_MACON2_PADCFG 0xE0 /* RW Short Packet Padding Settings */ +#define RB_ETH_MACON2_TXCRCEN 0x10 /* RW Send to add crc, if you need to add crc in PADCFG, this position is 1 */ +#define RB_ETH_MACON2_PHDREN 0x08 /* RW Special 4 bytes do not participate in crc check */ +#define RB_ETH_MACON2_HFRMEN 0x04 /* RW Allow jumbo frames */ +#define RB_ETH_MACON2_FULDPX 0x01 /* RW full duplex */ +#define R8_ETH_MABBIPG (*((volatile uint8_t *)(0x40028000+0x1B))) /* Minimum Interpacket Interval Register */ +#define RB_ETH_MABBIPG_MABBIPG 0x7F /* RW Minimum number of bytes between packets */ + +#define R32_ETH_TIM (*((volatile uint32_t *)(0x40028000+0x1C))) +#define R16_ETH_EPAUS (*((volatile uint16_t *)(0x40028000+0x1C))) /* RW Flow Control Pause Frame Time Register */ +#define R16_ETH_MAMXFL (*((volatile uint16_t *)(0x40028000+0x1E))) /* RW Maximum Received Packet Length Register */ +#define R16_ETH_MIRD (*((volatile uint16_t *)(0x40028000+0x20))) /* RW MII read data register */ + +#define R32_ETH_MIWR (*((volatile uint32_t *)(0x40028000+0x24))) +#define R8_ETH_MIREGADR (*((volatile uint8_t *)(0x40028000+0x24))) /* MII address register*/ +#define RB_ETH_MIREGADR_MASK 0x1F /* RW PHY register address mask */ +#define R8_ETH_MISTAT (*((volatile uint8_t *)(0x40028000+0x25))) /* RW PHY register address mask */ +//#define RB_ETH_MIREGADR_MIIWR 0x20 /* WO MII write command */ +#define R16_ETH_MIWR (*((volatile uint16_t *)(0x40028000+0x26))) /* WO MII Write Data Register */ +#define R32_ETH_MAADRL (*((volatile uint32_t *)(0x40028000+0x28))) /* RW MAC 1-4 */ +#define R8_ETH_MAADRL1 (*((volatile uint8_t *)(0x40028000+0x28))) /* RW MAC 1 */ +#define R8_ETH_MAADRL2 (*((volatile uint8_t *)(0x40028000+0x29))) /* RW MAC 2 */ +#define R8_ETH_MAADRL3 (*((volatile uint8_t *)(0x40028000+0x2A))) /* RW MAC 3 */ +#define R8_ETH_MAADRL4 (*((volatile uint8_t *)(0x40028000+0x2B))) /* RW MAC 4 */ +#define R16_ETH_MAADRH (*((volatile uint16_t *)(0x40028000+0x2C))) /* RW MAC 5-6 */ +#define R8_ETH_MAADRL5 (*((volatile uint8_t *)(0x40028000+0x2C))) /* RW MAC 4 */ +#define R8_ETH_MAADRL6 (*((volatile uint8_t *)(0x40028000+0x2D))) /* RW MAC 4 */ + +//PHY address +#define PHY_BMCR 0x00 /* Control Register */ +#define PHY_BMSR 0x01 /* Status Register */ +#define PHY_ANAR 0x04 /* Auto-Negotiation Advertisement Register */ +#define PHY_ANLPAR 0x05 /* Auto-Negotiation Link Partner Base Page Ability Register*/ +#define PHY_ANER 0x06 /* Auto-Negotiation Expansion Register */ +#define PHY_MDIX 0x1e /* Custom MDIX Mode Register */ +//Custom MDIX Mode Register @PHY_MDIX +#define PN_NORMAL 0x04 /* Analog p, n polarity selection */ +#define MDIX_MODE_MASK 0x03 /* mdix settings */ +#define MDIX_MODE_AUTO 0x00 /* */ +#define MDIX_MODE_MDIX 0x01 +#define MDIX_MODE_MDI 0x02 +//ECON2 test mode, to be determined +#define RX_VCM_MODE_0 +#define RX_VCM_MODE_1 +#define RX_VCM_MODE_2 +#define RX_VCM_MODE_3 +//RX reference voltage value setting @RX_REF +#define RX_REF_25mV (0<<2) /* 25mV */ +#define RX_REF_49mV (1<<2) /* 49mV */ +#define RX_REF_74mV (2<<2) /* 74mV */ +#define RX_REF_98mV (3<<2) /* 98mV */ +#define RX_REF_123mV (4<<2) /* 123mV */ +#define RX_REF_148mV (5<<2) /* 148mV */ +#define RX_REF_173mV (6<<2) /* 173mV */ +#define RX_REF_198mV (7<<2) /* 198mV */ +//TX DRIVER Bias Current @TX_AMP +#define TX_AMP_0 (0<<0) /* 43mA / 14.5mA (1.4V/0.7V) */ +#define TX_AMP_1 (1<<0) /* 53.1mA / 18mA (1.8V/0.9V) */ +#define TX_AMP_2 (2<<0) /* 75.6mA / 25.6mA (2.6V/1.3V) */ +#define TX_AMP_3 (3<<0) /* 122mA / 41.45mA (4.1V/2.3V) */ +//FCEN pause frame control @FCEN +#define FCEN_0_TIMER (3<<4) /* Send a 0 timer pause frame, then stop sending */ +#define FCEN_CYCLE (2<<4) /* Periodically send pause frames */ +#define FCEN_ONCE (1<<4) /* Send pause frame once, then stop sending */ +#define FCEN_STOP (0<<4) /* Stop sending pause frames */ +//PADCFG short packet control @PADCFG +#define PADCFG_AUTO_0 (7<<5) /* All short packets are filled with 00h to 64 bytes, then 4 bytes crc */ +#define PADCFG_NO_ACT_0 (6<<5) /* No padding for short packets */ +/* The detected VLAN network packet whose field is 8100h is automatically filled +with 00h to 64 bytes, otherwise the short packet is filled with 60 bytes of 0, and then 4 bytes of crc after filling */ +#define PADCFG_DETE_AUTO (5<<5) +#define PADCFG_NO_ACT_1 (4<<5) /* No padding for short packets */ +#define PADCFG_AUTO_1 (3<<5) /* All short packets are filled with 00h to 64 bytes, then 4 bytes crc */ +#define PADCFG_NO_ACT_2 (2<<5) /* No padding for short packets */ +#define PADCFG_AUTO_3 (1<<5) /* All short packets are filled with 00h to 60 bytes, and then 4 bytes crc */ +#define PADCFG_NO_ACT_3 (0<<5) /* No padding for short packets */ + +/* Bit or field definition for PHY basic status register */ +#define PHY_Linked_Status ((uint16_t)0x0004) /* Valid link established */ + +#define PHY_Reset ((uint16_t)0x8000) /* PHY Reset */ + +#define PHY_AutoNego_Complete ((uint16_t)0x0020) /* Auto-Negotioation process completed */ + +//MII control +#define RB_ETH_MIREGADR_MIIWR 0x20 /* WO MII write command */ +#define RB_ETH_MIREGADR_MIRDL 0x1f /* RW PHY register address */ + + +#include "ch32v20x_conf.h" + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_adc.h b/gat_stand_fw/periph/inc/ch32v20x_adc.h new file mode 100644 index 0000000..dd90c63 --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_adc.h @@ -0,0 +1,220 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_adc.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * ADC firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_ADC_H +#define __CH32V20x_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* ADC Init structure definition */ +typedef struct +{ + uint32_t ADC_Mode; /* Configures the ADC to operate in independent or + dual mode. + This parameter can be a value of @ref ADC_mode */ + + FunctionalState ADC_ScanConvMode; /* Specifies whether the conversion is performed in + Scan (multichannels) or Single (one channel) mode. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState ADC_ContinuousConvMode; /* Specifies whether the conversion is performed in + Continuous or Single mode. + This parameter can be set to ENABLE or DISABLE. */ + + uint32_t ADC_ExternalTrigConv; /* Defines the external trigger used to start the analog + to digital conversion of regular channels. This parameter + can be a value of @ref ADC_external_trigger_sources_for_regular_channels_conversion */ + + uint32_t ADC_DataAlign; /* Specifies whether the ADC data alignment is left or right. + This parameter can be a value of @ref ADC_data_align */ + + uint8_t ADC_NbrOfChannel; /* Specifies the number of ADC channels that will be converted + using the sequencer for regular channel group. + This parameter must range from 1 to 16. */ + + uint32_t ADC_OutputBuffer; /* Specifies whether the ADC channel output buffer is enabled or disabled. + This parameter can be a value of @ref ADC_OutputBuffer */ + + uint32_t ADC_Pga; /* Specifies the PGA gain multiple. + This parameter can be a value of @ref ADC_Pga */ +} ADC_InitTypeDef; + +/* ADC_mode */ +#define ADC_Mode_Independent ((uint32_t)0x00000000) +#define ADC_Mode_RegInjecSimult ((uint32_t)0x00010000) +#define ADC_Mode_RegSimult_AlterTrig ((uint32_t)0x00020000) +#define ADC_Mode_InjecSimult_FastInterl ((uint32_t)0x00030000) +#define ADC_Mode_InjecSimult_SlowInterl ((uint32_t)0x00040000) +#define ADC_Mode_InjecSimult ((uint32_t)0x00050000) +#define ADC_Mode_RegSimult ((uint32_t)0x00060000) +#define ADC_Mode_FastInterl ((uint32_t)0x00070000) +#define ADC_Mode_SlowInterl ((uint32_t)0x00080000) +#define ADC_Mode_AlterTrig ((uint32_t)0x00090000) + +/* ADC_external_trigger_sources_for_regular_channels_conversion */ +#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000) +#define ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x00020000) +#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x00060000) +#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x00080000) +#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x000A0000) +#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO ((uint32_t)0x000C0000) + +#define ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x00040000) +#define ADC_ExternalTrigConv_None ((uint32_t)0x000E0000) + +#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x00000000) +#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x00020000) +#define ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x00060000) +#define ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x00080000) +#define ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x000A0000) +#define ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x000C0000) + +/* ADC_data_align */ +#define ADC_DataAlign_Right ((uint32_t)0x00000000) +#define ADC_DataAlign_Left ((uint32_t)0x00000800) + +/* ADC_channels */ +#define ADC_Channel_0 ((uint8_t)0x00) +#define ADC_Channel_1 ((uint8_t)0x01) +#define ADC_Channel_2 ((uint8_t)0x02) +#define ADC_Channel_3 ((uint8_t)0x03) +#define ADC_Channel_4 ((uint8_t)0x04) +#define ADC_Channel_5 ((uint8_t)0x05) +#define ADC_Channel_6 ((uint8_t)0x06) +#define ADC_Channel_7 ((uint8_t)0x07) +#define ADC_Channel_8 ((uint8_t)0x08) +#define ADC_Channel_9 ((uint8_t)0x09) +#define ADC_Channel_10 ((uint8_t)0x0A) +#define ADC_Channel_11 ((uint8_t)0x0B) +#define ADC_Channel_12 ((uint8_t)0x0C) +#define ADC_Channel_13 ((uint8_t)0x0D) +#define ADC_Channel_14 ((uint8_t)0x0E) +#define ADC_Channel_15 ((uint8_t)0x0F) +#define ADC_Channel_16 ((uint8_t)0x10) +#define ADC_Channel_17 ((uint8_t)0x11) + +#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16) +#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17) + +/*ADC_output_buffer*/ +#define ADC_OutputBuffer_Enable ((uint32_t)0x04000000) +#define ADC_OutputBuffer_Disable ((uint32_t)0x00000000) + +/*ADC_pga*/ +#define ADC_Pga_1 ((uint32_t)0x00000000) +#define ADC_Pga_4 ((uint32_t)0x08000000) +#define ADC_Pga_16 ((uint32_t)0x10000000) +#define ADC_Pga_64 ((uint32_t)0x18000000) + +/* ADC_sampling_time */ +#define ADC_SampleTime_1Cycles5 ((uint8_t)0x00) +#define ADC_SampleTime_7Cycles5 ((uint8_t)0x01) +#define ADC_SampleTime_13Cycles5 ((uint8_t)0x02) +#define ADC_SampleTime_28Cycles5 ((uint8_t)0x03) +#define ADC_SampleTime_41Cycles5 ((uint8_t)0x04) +#define ADC_SampleTime_55Cycles5 ((uint8_t)0x05) +#define ADC_SampleTime_71Cycles5 ((uint8_t)0x06) +#define ADC_SampleTime_239Cycles5 ((uint8_t)0x07) + +/* ADC_external_trigger_sources_for_injected_channels_conversion */ +#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00002000) +#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00003000) +#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00004000) +#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00005000) +#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((uint32_t)0x00006000) + +#define ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00000000) +#define ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00001000) +#define ADC_ExternalTrigInjecConv_None ((uint32_t)0x00007000) + +#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00002000) +#define ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x00003000) +#define ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x00004000) +#define ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x00005000) +#define ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x00006000) + +/* ADC_injected_channel_selection */ +#define ADC_InjectedChannel_1 ((uint8_t)0x14) +#define ADC_InjectedChannel_2 ((uint8_t)0x18) +#define ADC_InjectedChannel_3 ((uint8_t)0x1C) +#define ADC_InjectedChannel_4 ((uint8_t)0x20) + +/* ADC_analog_watchdog_selection */ +#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200) +#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200) +#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200) +#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000) +#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000) +#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000) +#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000) + +/* ADC_interrupts_definition */ +#define ADC_IT_EOC ((uint16_t)0x0220) +#define ADC_IT_AWD ((uint16_t)0x0140) +#define ADC_IT_JEOC ((uint16_t)0x0480) + +/* ADC_flags_definition */ +#define ADC_FLAG_AWD ((uint8_t)0x01) +#define ADC_FLAG_EOC ((uint8_t)0x02) +#define ADC_FLAG_JEOC ((uint8_t)0x04) +#define ADC_FLAG_JSTRT ((uint8_t)0x08) +#define ADC_FLAG_STRT ((uint8_t)0x10) + +void ADC_DeInit(ADC_TypeDef *ADCx); +void ADC_Init(ADC_TypeDef *ADCx, ADC_InitTypeDef *ADC_InitStruct); +void ADC_StructInit(ADC_InitTypeDef *ADC_InitStruct); +void ADC_Cmd(ADC_TypeDef *ADCx, FunctionalState NewState); +void ADC_DMACmd(ADC_TypeDef *ADCx, FunctionalState NewState); +void ADC_ITConfig(ADC_TypeDef *ADCx, uint16_t ADC_IT, FunctionalState NewState); +void ADC_ResetCalibration(ADC_TypeDef *ADCx); +FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef *ADCx); +void ADC_StartCalibration(ADC_TypeDef *ADCx); +FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef *ADCx); +void ADC_SoftwareStartConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState); +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef *ADCx); +void ADC_DiscModeChannelCountConfig(ADC_TypeDef *ADCx, uint8_t Number); +void ADC_DiscModeCmd(ADC_TypeDef *ADCx, FunctionalState NewState); +void ADC_RegularChannelConfig(ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_ExternalTrigConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState); +uint16_t ADC_GetConversionValue(ADC_TypeDef *ADCx); +uint32_t ADC_GetDualModeConversionValue(void); +void ADC_AutoInjectedConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState); +void ADC_InjectedDiscModeCmd(ADC_TypeDef *ADCx, FunctionalState NewState); +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef *ADCx, uint32_t ADC_ExternalTrigInjecConv); +void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState); +void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState); +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef *ADCx); +void ADC_InjectedChannelConfig(ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef *ADCx, uint8_t Length); +void ADC_SetInjectedOffset(ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset); +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel); +void ADC_AnalogWatchdogCmd(ADC_TypeDef *ADCx, uint32_t ADC_AnalogWatchdog); +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef *ADCx, uint16_t HighThreshold, uint16_t LowThreshold); +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef *ADCx, uint8_t ADC_Channel); +void ADC_TempSensorVrefintCmd(FunctionalState NewState); +FlagStatus ADC_GetFlagStatus(ADC_TypeDef *ADCx, uint8_t ADC_FLAG); +void ADC_ClearFlag(ADC_TypeDef *ADCx, uint8_t ADC_FLAG); +ITStatus ADC_GetITStatus(ADC_TypeDef *ADCx, uint16_t ADC_IT); +void ADC_ClearITPendingBit(ADC_TypeDef *ADCx, uint16_t ADC_IT); +s32 TempSensor_Volt_To_Temper(s32 Value); +void ADC_BufferCmd(ADC_TypeDef *ADCx, FunctionalState NewState); +int16_t Get_CalibrationValue(ADC_TypeDef *ADCx); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_bkp.h b/gat_stand_fw/periph/inc/ch32v20x_bkp.h new file mode 100644 index 0000000..ada6c7e --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_bkp.h @@ -0,0 +1,93 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_bkp.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * BKP firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_BKP_H +#define __CH32V20x_BKP_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* Tamper_Pin_active_level */ +#define BKP_TamperPinLevel_High ((uint16_t)0x0000) +#define BKP_TamperPinLevel_Low ((uint16_t)0x0001) + +/* RTC_output_source_to_output_on_the_Tamper_pin */ +#define BKP_RTCOutputSource_None ((uint16_t)0x0000) +#define BKP_RTCOutputSource_CalibClock ((uint16_t)0x0080) +#define BKP_RTCOutputSource_Alarm ((uint16_t)0x0100) +#define BKP_RTCOutputSource_Second ((uint16_t)0x0300) + +/* Data_Backup_Register */ +#define BKP_DR1 ((uint16_t)0x0004) +#define BKP_DR2 ((uint16_t)0x0008) +#define BKP_DR3 ((uint16_t)0x000C) +#define BKP_DR4 ((uint16_t)0x0010) +#define BKP_DR5 ((uint16_t)0x0014) +#define BKP_DR6 ((uint16_t)0x0018) +#define BKP_DR7 ((uint16_t)0x001C) +#define BKP_DR8 ((uint16_t)0x0020) +#define BKP_DR9 ((uint16_t)0x0024) +#define BKP_DR10 ((uint16_t)0x0028) +#define BKP_DR11 ((uint16_t)0x0040) +#define BKP_DR12 ((uint16_t)0x0044) +#define BKP_DR13 ((uint16_t)0x0048) +#define BKP_DR14 ((uint16_t)0x004C) +#define BKP_DR15 ((uint16_t)0x0050) +#define BKP_DR16 ((uint16_t)0x0054) +#define BKP_DR17 ((uint16_t)0x0058) +#define BKP_DR18 ((uint16_t)0x005C) +#define BKP_DR19 ((uint16_t)0x0060) +#define BKP_DR20 ((uint16_t)0x0064) +#define BKP_DR21 ((uint16_t)0x0068) +#define BKP_DR22 ((uint16_t)0x006C) +#define BKP_DR23 ((uint16_t)0x0070) +#define BKP_DR24 ((uint16_t)0x0074) +#define BKP_DR25 ((uint16_t)0x0078) +#define BKP_DR26 ((uint16_t)0x007C) +#define BKP_DR27 ((uint16_t)0x0080) +#define BKP_DR28 ((uint16_t)0x0084) +#define BKP_DR29 ((uint16_t)0x0088) +#define BKP_DR30 ((uint16_t)0x008C) +#define BKP_DR31 ((uint16_t)0x0090) +#define BKP_DR32 ((uint16_t)0x0094) +#define BKP_DR33 ((uint16_t)0x0098) +#define BKP_DR34 ((uint16_t)0x009C) +#define BKP_DR35 ((uint16_t)0x00A0) +#define BKP_DR36 ((uint16_t)0x00A4) +#define BKP_DR37 ((uint16_t)0x00A8) +#define BKP_DR38 ((uint16_t)0x00AC) +#define BKP_DR39 ((uint16_t)0x00B0) +#define BKP_DR40 ((uint16_t)0x00B4) +#define BKP_DR41 ((uint16_t)0x00B8) +#define BKP_DR42 ((uint16_t)0x00BC) + +void BKP_DeInit(void); +void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel); +void BKP_TamperPinCmd(FunctionalState NewState); +void BKP_ITConfig(FunctionalState NewState); +void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource); +void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue); +void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data); +uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR); +FlagStatus BKP_GetFlagStatus(void); +void BKP_ClearFlag(void); +ITStatus BKP_GetITStatus(void); +void BKP_ClearITPendingBit(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_can.h b/gat_stand_fw/periph/inc/ch32v20x_can.h new file mode 100644 index 0000000..e916a2c --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_can.h @@ -0,0 +1,369 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_can.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * CAN firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_CAN_H +#define __CH32V20x_CAN_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* CAN init structure definition */ +typedef struct +{ + uint16_t CAN_Prescaler; /* Specifies the length of a time quantum. + It ranges from 1 to 1024. */ + + uint8_t CAN_Mode; /* Specifies the CAN operating mode. + This parameter can be a value of + @ref CAN_operating_mode */ + + uint8_t CAN_SJW; /* Specifies the maximum number of time quanta + the CAN hardware is allowed to lengthen or + shorten a bit to perform resynchronization. + This parameter can be a value of + @ref CAN_synchronisation_jump_width */ + + uint8_t CAN_BS1; /* Specifies the number of time quanta in Bit + Segment 1. This parameter can be a value of + @ref CAN_time_quantum_in_bit_segment_1 */ + + uint8_t CAN_BS2; /* Specifies the number of time quanta in Bit + Segment 2. + This parameter can be a value of + @ref CAN_time_quantum_in_bit_segment_2 */ + + FunctionalState CAN_TTCM; /* Enable or disable the time triggered + communication mode. This parameter can be set + either to ENABLE or DISABLE. */ + + FunctionalState CAN_ABOM; /* Enable or disable the automatic bus-off + management. This parameter can be set either + to ENABLE or DISABLE. */ + + FunctionalState CAN_AWUM; /* Enable or disable the automatic wake-up mode. + This parameter can be set either to ENABLE or + DISABLE. */ + + FunctionalState CAN_NART; /* Enable or disable the no-automatic + retransmission mode. This parameter can be + set either to ENABLE or DISABLE. */ + + FunctionalState CAN_RFLM; /* Enable or disable the Receive FIFO Locked mode. + This parameter can be set either to ENABLE + or DISABLE. */ + + FunctionalState CAN_TXFP; /* Enable or disable the transmit FIFO priority. + This parameter can be set either to ENABLE + or DISABLE. */ +} CAN_InitTypeDef; + +/* CAN filter init structure definition */ +typedef struct +{ + uint16_t CAN_FilterIdHigh; /* Specifies the filter identification number (MSBs for a 32-bit + configuration, first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterIdLow; /* Specifies the filter identification number (LSBs for a 32-bit + configuration, second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdHigh; /* Specifies the filter mask number or identification number, + according to the mode (MSBs for a 32-bit configuration, + first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdLow; /* Specifies the filter mask number or identification number, + according to the mode (LSBs for a 32-bit configuration, + second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterFIFOAssignment; /* Specifies the FIFO (0 or 1) which will be assigned to the filter. + This parameter can be a value of @ref CAN_filter_FIFO */ + + uint8_t CAN_FilterNumber; /* Specifies the filter which will be initialized. It ranges from 0 to 13. */ + + uint8_t CAN_FilterMode; /* Specifies the filter mode to be initialized. + This parameter can be a value of @ref CAN_filter_mode */ + + uint8_t CAN_FilterScale; /* Specifies the filter scale. + This parameter can be a value of @ref CAN_filter_scale */ + + FunctionalState CAN_FilterActivation; /* Enable or disable the filter. + This parameter can be set either to ENABLE or DISABLE. */ +} CAN_FilterInitTypeDef; + +/* CAN Tx message structure definition */ +typedef struct +{ + uint32_t StdId; /* Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /* Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /* Specifies the type of identifier for the message that + will be transmitted. This parameter can be a value + of @ref CAN_identifier_type */ + + uint8_t RTR; /* Specifies the type of frame for the message that will + be transmitted. This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /* Specifies the length of the frame that will be + transmitted. This parameter can be a value between + 0 to 8 */ + + uint8_t Data[8]; /* Contains the data to be transmitted. It ranges from 0 + to 0xFF. */ +} CanTxMsg; + +/* CAN Rx message structure definition */ +typedef struct +{ + uint32_t StdId; /* Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /* Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /* Specifies the type of identifier for the message that + will be received. This parameter can be a value of + @ref CAN_identifier_type */ + + uint8_t RTR; /* Specifies the type of frame for the received message. + This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /* Specifies the length of the frame that will be received. + This parameter can be a value between 0 to 8 */ + + uint8_t Data[8]; /* Contains the data to be received. It ranges from 0 to + 0xFF. */ + + uint8_t FMI; /* Specifies the index of the filter the message stored in + the mailbox passes through. This parameter can be a + value between 0 to 0xFF */ +} CanRxMsg; + +/* CAN_sleep_constants */ +#define CAN_InitStatus_Failed ((uint8_t)0x00) /* CAN initialization failed */ +#define CAN_InitStatus_Success ((uint8_t)0x01) /* CAN initialization OK */ + +/* CAN_Mode */ +#define CAN_Mode_Normal ((uint8_t)0x00) /* normal mode */ +#define CAN_Mode_LoopBack ((uint8_t)0x01) /* loopback mode */ +#define CAN_Mode_Silent ((uint8_t)0x02) /* silent mode */ +#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /* loopback combined with silent mode */ + +/* CAN_Operating_Mode */ +#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /* Initialization mode */ +#define CAN_OperatingMode_Normal ((uint8_t)0x01) /* Normal mode */ +#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /* sleep mode */ + +/* CAN_Mode_Status */ +#define CAN_ModeStatus_Failed ((uint8_t)0x00) /* CAN entering the specific mode failed */ +#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /* CAN entering the specific mode Succeed */ + +/* CAN_synchronisation_jump_width */ +#define CAN_SJW_1tq ((uint8_t)0x00) /* 1 time quantum */ +#define CAN_SJW_2tq ((uint8_t)0x01) /* 2 time quantum */ +#define CAN_SJW_3tq ((uint8_t)0x02) /* 3 time quantum */ +#define CAN_SJW_4tq ((uint8_t)0x03) /* 4 time quantum */ + +/* CAN_time_quantum_in_bit_segment_1 */ +#define CAN_BS1_1tq ((uint8_t)0x00) /* 1 time quantum */ +#define CAN_BS1_2tq ((uint8_t)0x01) /* 2 time quantum */ +#define CAN_BS1_3tq ((uint8_t)0x02) /* 3 time quantum */ +#define CAN_BS1_4tq ((uint8_t)0x03) /* 4 time quantum */ +#define CAN_BS1_5tq ((uint8_t)0x04) /* 5 time quantum */ +#define CAN_BS1_6tq ((uint8_t)0x05) /* 6 time quantum */ +#define CAN_BS1_7tq ((uint8_t)0x06) /* 7 time quantum */ +#define CAN_BS1_8tq ((uint8_t)0x07) /* 8 time quantum */ +#define CAN_BS1_9tq ((uint8_t)0x08) /* 9 time quantum */ +#define CAN_BS1_10tq ((uint8_t)0x09) /* 10 time quantum */ +#define CAN_BS1_11tq ((uint8_t)0x0A) /* 11 time quantum */ +#define CAN_BS1_12tq ((uint8_t)0x0B) /* 12 time quantum */ +#define CAN_BS1_13tq ((uint8_t)0x0C) /* 13 time quantum */ +#define CAN_BS1_14tq ((uint8_t)0x0D) /* 14 time quantum */ +#define CAN_BS1_15tq ((uint8_t)0x0E) /* 15 time quantum */ +#define CAN_BS1_16tq ((uint8_t)0x0F) /* 16 time quantum */ + +/* CAN_time_quantum_in_bit_segment_2 */ +#define CAN_BS2_1tq ((uint8_t)0x00) /* 1 time quantum */ +#define CAN_BS2_2tq ((uint8_t)0x01) /* 2 time quantum */ +#define CAN_BS2_3tq ((uint8_t)0x02) /* 3 time quantum */ +#define CAN_BS2_4tq ((uint8_t)0x03) /* 4 time quantum */ +#define CAN_BS2_5tq ((uint8_t)0x04) /* 5 time quantum */ +#define CAN_BS2_6tq ((uint8_t)0x05) /* 6 time quantum */ +#define CAN_BS2_7tq ((uint8_t)0x06) /* 7 time quantum */ +#define CAN_BS2_8tq ((uint8_t)0x07) /* 8 time quantum */ + +/* CAN_filter_mode */ +#define CAN_FilterMode_IdMask ((uint8_t)0x00) /* identifier/mask mode */ +#define CAN_FilterMode_IdList ((uint8_t)0x01) /* identifier list mode */ + +/* CAN_filter_scale */ +#define CAN_FilterScale_16bit ((uint8_t)0x00) /* Two 16-bit filters */ +#define CAN_FilterScale_32bit ((uint8_t)0x01) /* One 32-bit filter */ + +/* CAN_filter_FIFO */ +#define CAN_Filter_FIFO0 ((uint8_t)0x00) /* Filter FIFO 0 assignment for filter x */ +#define CAN_Filter_FIFO1 ((uint8_t)0x01) /* Filter FIFO 1 assignment for filter x */ + +/* CAN_identifier_type */ +#define CAN_Id_Standard ((uint32_t)0x00000000) /* Standard Id */ +#define CAN_Id_Extended ((uint32_t)0x00000004) /* Extended Id */ + +/* CAN_remote_transmission_request */ +#define CAN_RTR_Data ((uint32_t)0x00000000) /* Data frame */ +#define CAN_RTR_Remote ((uint32_t)0x00000002) /* Remote frame */ + +/* CAN_transmit_constants */ +#define CAN_TxStatus_Failed ((uint8_t)0x00) /* CAN transmission failed */ +#define CAN_TxStatus_Ok ((uint8_t)0x01) /* CAN transmission succeeded */ +#define CAN_TxStatus_Pending ((uint8_t)0x02) /* CAN transmission pending */ +#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /* CAN cell did not provide an empty mailbox */ + +/* CAN_receive_FIFO_number_constants */ +#define CAN_FIFO0 ((uint8_t)0x00) /* CAN FIFO 0 used to receive */ +#define CAN_FIFO1 ((uint8_t)0x01) /* CAN FIFO 1 used to receive */ + +/* CAN_sleep_constants */ +#define CAN_Sleep_Failed ((uint8_t)0x00) /* CAN did not enter the sleep mode */ +#define CAN_Sleep_Ok ((uint8_t)0x01) /* CAN entered the sleep mode */ + +/* CAN_wake_up_constants */ +#define CAN_WakeUp_Failed ((uint8_t)0x00) /* CAN did not leave the sleep mode */ +#define CAN_WakeUp_Ok ((uint8_t)0x01) /* CAN leaved the sleep mode */ + +/* CAN_Error_Code_constants */ +#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /* No Error */ +#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /* Stuff Error */ +#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /* Form Error */ +#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /* Acknowledgment Error */ +#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /* Bit Recessive Error */ +#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /* Bit Dominant Error */ +#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /* CRC Error */ +#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /* Software Set Error */ + +/* CAN_flags */ +/* Transmit Flags */ +/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() + * and CAN_ClearFlag() functions. + * If the flag is 0x1XXXXXXX, it means that it can only be used with CAN_GetFlagStatus() function. +*/ +#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /* Request MailBox0 Flag */ +#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /* Request MailBox1 Flag */ +#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /* Request MailBox2 Flag */ + +/* Receive Flags */ +#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /* FIFO 0 Message Pending Flag */ +#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /* FIFO 0 Full Flag */ +#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /* FIFO 0 Overrun Flag */ +#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /* FIFO 1 Message Pending Flag */ +#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /* FIFO 1 Full Flag */ +#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /* FIFO 1 Overrun Flag */ + +/* Operating Mode Flags */ +#define CAN_FLAG_WKU ((uint32_t)0x31000008) /* Wake up Flag */ +#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /* Sleep acknowledge Flag */ +/* Note: + *When SLAK intterupt is disabled (SLKIE=0), no polling on SLAKI is possible. + *In this case the SLAK bit can be polled. +*/ + + +/* Error Flags */ +#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /* Error Warning Flag */ +#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /* Error Passive Flag */ +#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /* Bus-Off Flag */ +#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /* Last error code Flag */ + +/* CAN_interrupts */ +#define CAN_IT_TME ((uint32_t)0x00000001) /* Transmit mailbox empty Interrupt*/ + +/* Receive Interrupts */ +#define CAN_IT_FMP0 ((uint32_t)0x00000002) /* FIFO 0 message pending Interrupt*/ +#define CAN_IT_FF0 ((uint32_t)0x00000004) /* FIFO 0 full Interrupt*/ +#define CAN_IT_FOV0 ((uint32_t)0x00000008) /* FIFO 0 overrun Interrupt*/ +#define CAN_IT_FMP1 ((uint32_t)0x00000010) /* FIFO 1 message pending Interrupt*/ +#define CAN_IT_FF1 ((uint32_t)0x00000020) /* FIFO 1 full Interrupt*/ +#define CAN_IT_FOV1 ((uint32_t)0x00000040) /* FIFO 1 overrun Interrupt*/ + +/* Operating Mode Interrupts */ +#define CAN_IT_WKU ((uint32_t)0x00010000) /* Wake-up Interrupt*/ +#define CAN_IT_SLK ((uint32_t)0x00020000) /* Sleep acknowledge Interrupt*/ + +/* Error Interrupts */ +#define CAN_IT_EWG ((uint32_t)0x00000100) /* Error warning Interrupt*/ +#define CAN_IT_EPV ((uint32_t)0x00000200) /* Error passive Interrupt*/ +#define CAN_IT_BOF ((uint32_t)0x00000400) /* Bus-off Interrupt*/ +#define CAN_IT_LEC ((uint32_t)0x00000800) /* Last error code Interrupt*/ +#define CAN_IT_ERR ((uint32_t)0x00008000) /* Error Interrupt*/ + +/* Flags named as Interrupts : kept only for FW compatibility */ +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME + +/* CAN_Legacy */ +#define CANINITFAILED CAN_InitStatus_Failed +#define CANINITOK CAN_InitStatus_Success +#define CAN_FilterFIFO0 CAN_Filter_FIFO0 +#define CAN_FilterFIFO1 CAN_Filter_FIFO1 +#define CAN_ID_STD CAN_Id_Standard +#define CAN_ID_EXT CAN_Id_Extended +#define CAN_RTR_DATA CAN_RTR_Data +#define CAN_RTR_REMOTE CAN_RTR_Remote +#define CANTXFAILE CAN_TxStatus_Failed +#define CANTXOK CAN_TxStatus_Ok +#define CANTXPENDING CAN_TxStatus_Pending +#define CAN_NO_MB CAN_TxStatus_NoMailBox +#define CANSLEEPFAILED CAN_Sleep_Failed +#define CANSLEEPOK CAN_Sleep_Ok +#define CANWAKEUPFAILED CAN_WakeUp_Failed +#define CANWAKEUPOK CAN_WakeUp_Ok + +void CAN_DeInit(CAN_TypeDef *CANx); +uint8_t CAN_Init(CAN_TypeDef *CANx, CAN_InitTypeDef *CAN_InitStruct); +void CAN_FilterInit(CAN_FilterInitTypeDef *CAN_FilterInitStruct); +void CAN_StructInit(CAN_InitTypeDef *CAN_InitStruct); +void CAN_SlaveStartBank(uint8_t CAN_BankNumber); +void CAN_DBGFreeze(CAN_TypeDef *CANx, FunctionalState NewState); +void CAN_TTComModeCmd(CAN_TypeDef *CANx, FunctionalState NewState); +uint8_t CAN_Transmit(CAN_TypeDef *CANx, CanTxMsg *TxMessage); +uint8_t CAN_TransmitStatus(CAN_TypeDef *CANx, uint8_t TransmitMailbox); +void CAN_CancelTransmit(CAN_TypeDef *CANx, uint8_t Mailbox); +void CAN_Receive(CAN_TypeDef *CANx, uint8_t FIFONumber, CanRxMsg *RxMessage); +void CAN_FIFORelease(CAN_TypeDef *CANx, uint8_t FIFONumber); +uint8_t CAN_MessagePending(CAN_TypeDef *CANx, uint8_t FIFONumber); +uint8_t CAN_OperatingModeRequest(CAN_TypeDef *CANx, uint8_t CAN_OperatingMode); +uint8_t CAN_Sleep(CAN_TypeDef *CANx); +uint8_t CAN_WakeUp(CAN_TypeDef *CANx); +uint8_t CAN_GetLastErrorCode(CAN_TypeDef *CANx); +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef *CANx); +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef *CANx); +void CAN_ITConfig(CAN_TypeDef *CANx, uint32_t CAN_IT, FunctionalState NewState); +FlagStatus CAN_GetFlagStatus(CAN_TypeDef *CANx, uint32_t CAN_FLAG); +void CAN_ClearFlag(CAN_TypeDef *CANx, uint32_t CAN_FLAG); +ITStatus CAN_GetITStatus(CAN_TypeDef *CANx, uint32_t CAN_IT); +void CAN_ClearITPendingBit(CAN_TypeDef *CANx, uint32_t CAN_IT); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_crc.h b/gat_stand_fw/periph/inc/ch32v20x_crc.h new file mode 100644 index 0000000..ef35c70 --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_crc.h @@ -0,0 +1,33 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_crc.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * CRC firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_CRC_H +#define __CH32V20x_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +void CRC_ResetDR(void); +uint32_t CRC_CalcCRC(uint32_t Data); +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength); +uint32_t CRC_GetCRC(void); +void CRC_SetIDRegister(uint8_t IDValue); +uint8_t CRC_GetIDRegister(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_dbgmcu.h b/gat_stand_fw/periph/inc/ch32v20x_dbgmcu.h new file mode 100644 index 0000000..04f9c1d --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_dbgmcu.h @@ -0,0 +1,52 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_dbgmcu.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * DBGMCU firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_DBGMCU_H +#define __CH32V20x_DBGMCU_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +#define DBGMCU_SLEEP ((uint32_t)0x00000001) +#define DBGMCU_STOP ((uint32_t)0x00000002) +#define DBGMCU_STANDBY ((uint32_t)0x00000004) +#define DBGMCU_IWDG_STOP ((uint32_t)0x00000100) +#define DBGMCU_WWDG_STOP ((uint32_t)0x00000200) +#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00000400) +#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00000800) +#define DBGMCU_TIM1_STOP ((uint32_t)0x00001000) +#define DBGMCU_TIM2_STOP ((uint32_t)0x00002000) +#define DBGMCU_TIM3_STOP ((uint32_t)0x00004000) +#define DBGMCU_TIM4_STOP ((uint32_t)0x00008000) +#define DBGMCU_TIM5_STOP ((uint32_t)0x00010000) +#define DBGMCU_TIM6_STOP ((uint32_t)0x00020000) +#define DBGMCU_TIM7_STOP ((uint32_t)0x00040000) +#define DBGMCU_TIM8_STOP ((uint32_t)0x00080000) +#define DBGMCU_CAN1_STOP ((uint32_t)0x00100000) +#define DBGMCU_CAN2_STOP ((uint32_t)0x00200000) +#define DBGMCU_TIM9_STOP ((uint32_t)0x00400000) +#define DBGMCU_TIM10_STOP ((uint32_t)0x00800000) + +uint32_t DBGMCU_GetREVID(void); +uint32_t DBGMCU_GetDEVID(void); +uint32_t __get_DEBUG_CR(void); +void __set_DEBUG_CR(uint32_t value); +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState); +uint32_t DBGMCU_GetCHIPID( void ); +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_dma.h b/gat_stand_fw/periph/inc/ch32v20x_dma.h new file mode 100644 index 0000000..3eaa2fd --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_dma.h @@ -0,0 +1,184 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_dma.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * DMA firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_DMA_H +#define __CH32V20x_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* DMA Init structure definition */ +typedef struct +{ + uint32_t DMA_PeripheralBaseAddr; /* Specifies the peripheral base address for DMAy Channelx. */ + + uint32_t DMA_MemoryBaseAddr; /* Specifies the memory base address for DMAy Channelx. */ + + uint32_t DMA_DIR; /* Specifies if the peripheral is the source or destination. + This parameter can be a value of @ref DMA_data_transfer_direction */ + + uint32_t DMA_BufferSize; /* Specifies the buffer size, in data unit, of the specified Channel. + The data unit is equal to the configuration set in DMA_PeripheralDataSize + or DMA_MemoryDataSize members depending in the transfer direction. */ + + uint32_t DMA_PeripheralInc; /* Specifies whether the Peripheral address register is incremented or not. + This parameter can be a value of @ref DMA_peripheral_incremented_mode */ + + uint32_t DMA_MemoryInc; /* Specifies whether the memory address register is incremented or not. + This parameter can be a value of @ref DMA_memory_incremented_mode */ + + uint32_t DMA_PeripheralDataSize; /* Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_peripheral_data_size */ + + uint32_t DMA_MemoryDataSize; /* Specifies the Memory data width. + This parameter can be a value of @ref DMA_memory_data_size */ + + uint32_t DMA_Mode; /* Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_circular_normal_mode. + @note: The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t DMA_Priority; /* Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_priority_level */ + + uint32_t DMA_M2M; /* Specifies if the DMAy Channelx will be used in memory-to-memory transfer. + This parameter can be a value of @ref DMA_memory_to_memory */ +} DMA_InitTypeDef; + +/* DMA_data_transfer_direction */ +#define DMA_DIR_PeripheralDST ((uint32_t)0x00000010) +#define DMA_DIR_PeripheralSRC ((uint32_t)0x00000000) + +/* DMA_peripheral_incremented_mode */ +#define DMA_PeripheralInc_Enable ((uint32_t)0x00000040) +#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000) + +/* DMA_memory_incremented_mode */ +#define DMA_MemoryInc_Enable ((uint32_t)0x00000080) +#define DMA_MemoryInc_Disable ((uint32_t)0x00000000) + +/* DMA_peripheral_data_size */ +#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000) +#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000100) +#define DMA_PeripheralDataSize_Word ((uint32_t)0x00000200) + +/* DMA_memory_data_size */ +#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000) +#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00000400) +#define DMA_MemoryDataSize_Word ((uint32_t)0x00000800) + +/* DMA_circular_normal_mode */ +#define DMA_Mode_Circular ((uint32_t)0x00000020) +#define DMA_Mode_Normal ((uint32_t)0x00000000) + +/* DMA_priority_level */ +#define DMA_Priority_VeryHigh ((uint32_t)0x00003000) +#define DMA_Priority_High ((uint32_t)0x00002000) +#define DMA_Priority_Medium ((uint32_t)0x00001000) +#define DMA_Priority_Low ((uint32_t)0x00000000) + +/* DMA_memory_to_memory */ +#define DMA_M2M_Enable ((uint32_t)0x00004000) +#define DMA_M2M_Disable ((uint32_t)0x00000000) + +/* DMA_interrupts_definition */ +#define DMA_IT_TC ((uint32_t)0x00000002) +#define DMA_IT_HT ((uint32_t)0x00000004) +#define DMA_IT_TE ((uint32_t)0x00000008) + +#define DMA1_IT_GL1 ((uint32_t)0x00000001) +#define DMA1_IT_TC1 ((uint32_t)0x00000002) +#define DMA1_IT_HT1 ((uint32_t)0x00000004) +#define DMA1_IT_TE1 ((uint32_t)0x00000008) +#define DMA1_IT_GL2 ((uint32_t)0x00000010) +#define DMA1_IT_TC2 ((uint32_t)0x00000020) +#define DMA1_IT_HT2 ((uint32_t)0x00000040) +#define DMA1_IT_TE2 ((uint32_t)0x00000080) +#define DMA1_IT_GL3 ((uint32_t)0x00000100) +#define DMA1_IT_TC3 ((uint32_t)0x00000200) +#define DMA1_IT_HT3 ((uint32_t)0x00000400) +#define DMA1_IT_TE3 ((uint32_t)0x00000800) +#define DMA1_IT_GL4 ((uint32_t)0x00001000) +#define DMA1_IT_TC4 ((uint32_t)0x00002000) +#define DMA1_IT_HT4 ((uint32_t)0x00004000) +#define DMA1_IT_TE4 ((uint32_t)0x00008000) +#define DMA1_IT_GL5 ((uint32_t)0x00010000) +#define DMA1_IT_TC5 ((uint32_t)0x00020000) +#define DMA1_IT_HT5 ((uint32_t)0x00040000) +#define DMA1_IT_TE5 ((uint32_t)0x00080000) +#define DMA1_IT_GL6 ((uint32_t)0x00100000) +#define DMA1_IT_TC6 ((uint32_t)0x00200000) +#define DMA1_IT_HT6 ((uint32_t)0x00400000) +#define DMA1_IT_TE6 ((uint32_t)0x00800000) +#define DMA1_IT_GL7 ((uint32_t)0x01000000) +#define DMA1_IT_TC7 ((uint32_t)0x02000000) +#define DMA1_IT_HT7 ((uint32_t)0x04000000) +#define DMA1_IT_TE7 ((uint32_t)0x08000000) +#define DMA1_IT_GL8 ((uint32_t)0x10000000) +#define DMA1_IT_TC8 ((uint32_t)0x20000000) +#define DMA1_IT_HT8 ((uint32_t)0x40000000) +#define DMA1_IT_TE8 ((uint32_t)0x80000000) + +/* DMA_flags_definition */ +#define DMA1_FLAG_GL1 ((uint32_t)0x00000001) +#define DMA1_FLAG_TC1 ((uint32_t)0x00000002) +#define DMA1_FLAG_HT1 ((uint32_t)0x00000004) +#define DMA1_FLAG_TE1 ((uint32_t)0x00000008) +#define DMA1_FLAG_GL2 ((uint32_t)0x00000010) +#define DMA1_FLAG_TC2 ((uint32_t)0x00000020) +#define DMA1_FLAG_HT2 ((uint32_t)0x00000040) +#define DMA1_FLAG_TE2 ((uint32_t)0x00000080) +#define DMA1_FLAG_GL3 ((uint32_t)0x00000100) +#define DMA1_FLAG_TC3 ((uint32_t)0x00000200) +#define DMA1_FLAG_HT3 ((uint32_t)0x00000400) +#define DMA1_FLAG_TE3 ((uint32_t)0x00000800) +#define DMA1_FLAG_GL4 ((uint32_t)0x00001000) +#define DMA1_FLAG_TC4 ((uint32_t)0x00002000) +#define DMA1_FLAG_HT4 ((uint32_t)0x00004000) +#define DMA1_FLAG_TE4 ((uint32_t)0x00008000) +#define DMA1_FLAG_GL5 ((uint32_t)0x00010000) +#define DMA1_FLAG_TC5 ((uint32_t)0x00020000) +#define DMA1_FLAG_HT5 ((uint32_t)0x00040000) +#define DMA1_FLAG_TE5 ((uint32_t)0x00080000) +#define DMA1_FLAG_GL6 ((uint32_t)0x00100000) +#define DMA1_FLAG_TC6 ((uint32_t)0x00200000) +#define DMA1_FLAG_HT6 ((uint32_t)0x00400000) +#define DMA1_FLAG_TE6 ((uint32_t)0x00800000) +#define DMA1_FLAG_GL7 ((uint32_t)0x01000000) +#define DMA1_FLAG_TC7 ((uint32_t)0x02000000) +#define DMA1_FLAG_HT7 ((uint32_t)0x04000000) +#define DMA1_FLAG_TE7 ((uint32_t)0x08000000) +#define DMA1_FLAG_GL8 ((uint32_t)0x10000000) +#define DMA1_FLAG_TC8 ((uint32_t)0x20000000) +#define DMA1_FLAG_HT8 ((uint32_t)0x40000000) +#define DMA1_FLAG_TE8 ((uint32_t)0x80000000) + +void DMA_DeInit(DMA_Channel_TypeDef *DMAy_Channelx); +void DMA_Init(DMA_Channel_TypeDef *DMAy_Channelx, DMA_InitTypeDef *DMA_InitStruct); +void DMA_StructInit(DMA_InitTypeDef *DMA_InitStruct); +void DMA_Cmd(DMA_Channel_TypeDef *DMAy_Channelx, FunctionalState NewState); +void DMA_ITConfig(DMA_Channel_TypeDef *DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState); +void DMA_SetCurrDataCounter(DMA_Channel_TypeDef *DMAy_Channelx, uint16_t DataNumber); +uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef *DMAy_Channelx); +FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG); +void DMA_ClearFlag(uint32_t DMAy_FLAG); +ITStatus DMA_GetITStatus(uint32_t DMAy_IT); +void DMA_ClearITPendingBit(uint32_t DMAy_IT); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_exti.h b/gat_stand_fw/periph/inc/ch32v20x_exti.h new file mode 100644 index 0000000..fe006a9 --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_exti.h @@ -0,0 +1,95 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_exti.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * EXTI firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_EXTI_H +#define __CH32V20x_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* EXTI mode enumeration */ +typedef enum +{ + EXTI_Mode_Interrupt = 0x00, + EXTI_Mode_Event = 0x04 +} EXTIMode_TypeDef; + +/* EXTI Trigger enumeration */ +typedef enum +{ + EXTI_Trigger_Rising = 0x08, + EXTI_Trigger_Falling = 0x0C, + EXTI_Trigger_Rising_Falling = 0x10 +} EXTITrigger_TypeDef; + +/* EXTI Init Structure definition */ +typedef struct +{ + uint32_t EXTI_Line; /* Specifies the EXTI lines to be enabled or disabled. + This parameter can be any combination of @ref EXTI_Lines */ + + EXTIMode_TypeDef EXTI_Mode; /* Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTIMode_TypeDef */ + + EXTITrigger_TypeDef EXTI_Trigger; /* Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTIMode_TypeDef */ + + FunctionalState EXTI_LineCmd; /* Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ +} EXTI_InitTypeDef; + +/* EXTI_Lines */ +#define EXTI_Line0 ((uint32_t)0x00001) /* External interrupt line 0 */ +#define EXTI_Line1 ((uint32_t)0x00002) /* External interrupt line 1 */ +#define EXTI_Line2 ((uint32_t)0x00004) /* External interrupt line 2 */ +#define EXTI_Line3 ((uint32_t)0x00008) /* External interrupt line 3 */ +#define EXTI_Line4 ((uint32_t)0x00010) /* External interrupt line 4 */ +#define EXTI_Line5 ((uint32_t)0x00020) /* External interrupt line 5 */ +#define EXTI_Line6 ((uint32_t)0x00040) /* External interrupt line 6 */ +#define EXTI_Line7 ((uint32_t)0x00080) /* External interrupt line 7 */ +#define EXTI_Line8 ((uint32_t)0x00100) /* External interrupt line 8 */ +#define EXTI_Line9 ((uint32_t)0x00200) /* External interrupt line 9 */ +#define EXTI_Line10 ((uint32_t)0x00400) /* External interrupt line 10 */ +#define EXTI_Line11 ((uint32_t)0x00800) /* External interrupt line 11 */ +#define EXTI_Line12 ((uint32_t)0x01000) /* External interrupt line 12 */ +#define EXTI_Line13 ((uint32_t)0x02000) /* External interrupt line 13 */ +#define EXTI_Line14 ((uint32_t)0x04000) /* External interrupt line 14 */ +#define EXTI_Line15 ((uint32_t)0x08000) /* External interrupt line 15 */ +#define EXTI_Line16 ((uint32_t)0x10000) /* External interrupt line 16 Connected to the PVD Output */ +#define EXTI_Line17 ((uint32_t)0x20000) /* External interrupt line 17 Connected to the RTC Alarm event */ +#define EXTI_Line18 ((uint32_t)0x40000) /* External interrupt line 18 Connected to the USBD Device \ + Wakeup from suspend event */ +#define EXTI_Line19 ((uint32_t)0x80000) /* External interrupt line 19 Connected to the Ethernet Wakeup event */ +#define EXTI_Line20 ((uint32_t)0x100000) /* External interrupt line 20 Connected to the USBFS Wakeup event */ + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) + #define EXTI_Line21 ((uint32_t)0x200000) /* External interrupt line 21 Connected to the OSCCAL Wakeup event */ + +#endif + +void EXTI_DeInit(void); +void EXTI_Init(EXTI_InitTypeDef *EXTI_InitStruct); +void EXTI_StructInit(EXTI_InitTypeDef *EXTI_InitStruct); +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line); +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line); +void EXTI_ClearFlag(uint32_t EXTI_Line); +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line); +void EXTI_ClearITPendingBit(uint32_t EXTI_Line); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_flash.h b/gat_stand_fw/periph/inc/ch32v20x_flash.h new file mode 100644 index 0000000..e92130d --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_flash.h @@ -0,0 +1,149 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_flash.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the FLASH + * firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_FLASH_H +#define __CH32V20x_FLASH_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* FLASH Status */ +typedef enum +{ + FLASH_BUSY = 1, + FLASH_ERROR_PG, + FLASH_ERROR_WRP, + FLASH_COMPLETE, + FLASH_TIMEOUT, + FLASH_OP_RANGE_ERROR = 0xFD, + FLASH_ALIGN_ERROR = 0xFE, + FLASH_ADR_RANGE_ERROR = 0xFF, +} FLASH_Status; + +/* Write Protect */ +#define FLASH_WRProt_Sectors0 ((uint32_t)0x00000001) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors1 ((uint32_t)0x00000002) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors2 ((uint32_t)0x00000004) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors3 ((uint32_t)0x00000008) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors4 ((uint32_t)0x00000010) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors5 ((uint32_t)0x00000020) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors6 ((uint32_t)0x00000040) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors7 ((uint32_t)0x00000080) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors8 ((uint32_t)0x00000100) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors9 ((uint32_t)0x00000200) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors10 ((uint32_t)0x00000400) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors11 ((uint32_t)0x00000800) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors12 ((uint32_t)0x00001000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors13 ((uint32_t)0x00002000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors14 ((uint32_t)0x00004000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors15 ((uint32_t)0x00008000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors16 ((uint32_t)0x00010000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors17 ((uint32_t)0x00020000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors18 ((uint32_t)0x00040000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors19 ((uint32_t)0x00080000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors20 ((uint32_t)0x00100000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors21 ((uint32_t)0x00200000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors22 ((uint32_t)0x00400000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors23 ((uint32_t)0x00800000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors24 ((uint32_t)0x01000000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors25 ((uint32_t)0x02000000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors26 ((uint32_t)0x04000000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors27 ((uint32_t)0x08000000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors28 ((uint32_t)0x10000000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors29 ((uint32_t)0x20000000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors30 ((uint32_t)0x40000000) /* Write protection of setor 0 */ +#define FLASH_WRProt_Sectors31to127 ((uint32_t)0x80000000) /* Write protection of page 62 to 255 */ + +#define FLASH_WRProt_AllSectors ((uint32_t)0xFFFFFFFF) /* Write protection of all Sectors */ + +/* Option_Bytes_IWatchdog */ +#define OB_IWDG_SW ((uint16_t)0x0001) /* Software IWDG selected */ +#define OB_IWDG_HW ((uint16_t)0x0000) /* Hardware IWDG selected */ + +/* Option_Bytes_nRST_STOP */ +#define OB_STOP_NoRST ((uint16_t)0x0002) /* No reset generated when entering in STOP */ +#define OB_STOP_RST ((uint16_t)0x0000) /* Reset generated when entering in STOP */ + +/* Option_Bytes_nRST_STDBY */ +#define OB_STDBY_NoRST ((uint16_t)0x0004) /* No reset generated when entering in STANDBY */ +#define OB_STDBY_RST ((uint16_t)0x0000) /* Reset generated when entering in STANDBY */ + +/* FLASH_Interrupts */ +#define FLASH_IT_ERROR ((uint32_t)0x00000400) /* FPEC error interrupt source */ +#define FLASH_IT_EOP ((uint32_t)0x00001000) /* End of FLASH Operation Interrupt source */ +#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /* FPEC BANK1 error interrupt source */ +#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /* End of FLASH BANK1 Operation Interrupt source */ + +/* FLASH_Flags */ +#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /* FLASH Busy flag */ +#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /* FLASH End of Operation flag */ +#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /* FLASH Write protected error flag */ +#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /* FLASH Option Byte error flag */ + +#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /* FLASH BANK1 Busy flag*/ +#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /* FLASH BANK1 End of Operation flag */ +#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /* FLASH BANK1 Write protected error flag */ + +/* FLASH_Access_CLK */ +#define FLASH_Access_SYSTEM_HALF ((uint32_t)0x00000000) /* FLASH Enhance Clock = SYSTEM */ +#define FLASH_Access_SYSTEM ((uint32_t)0x02000000) /* Enhance_CLK = SYSTEM/2 */ + +/*Functions used for all devices*/ +void FLASH_Unlock(void); +void FLASH_Lock(void); +FLASH_Status FLASH_ErasePage(uint32_t Page_Address); +FLASH_Status FLASH_EraseAllPages(void); +FLASH_Status FLASH_EraseOptionBytes(void); +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data); +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data); +FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data); +FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Sectors); +FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState); +FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY); +uint32_t FLASH_GetUserOptionByte(void); +uint32_t FLASH_GetWriteProtectionOptionByte(void); +FlagStatus FLASH_GetReadOutProtectionStatus(void); +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState); +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG); +void FLASH_ClearFlag(uint32_t FLASH_FLAG); +FLASH_Status FLASH_GetStatus(void); +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout); +void FLASH_Unlock_Fast(void); +void FLASH_Lock_Fast(void); +void FLASH_ErasePage_Fast(uint32_t Page_Address); +void FLASH_EraseBlock_32K_Fast(uint32_t Block_Address); +void FLASH_EraseBlock_64K_Fast(uint32_t Block_Address); +void FLASH_ProgramPage_Fast(uint32_t Page_Address, uint32_t *pbuf); +void FLASH_Access_Clock_Cfg(uint32_t FLASH_Access_CLK); +void FLASH_Enhance_Mode(FunctionalState NewState); + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) +void FLASH_GetMACAddress(uint8_t *Buffer); +#endif + +/* New function used for all devices */ +void FLASH_UnlockBank1(void); +void FLASH_LockBank1(void); +FLASH_Status FLASH_EraseAllBank1Pages(void); +FLASH_Status FLASH_GetBank1Status(void); +FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout); +FLASH_Status FLASH_ROM_ERASE(uint32_t StartAddr, uint32_t Length); +FLASH_Status FLASH_ROM_WRITE(uint32_t StartAddr, uint32_t *pbuf, uint32_t Length); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_gpio.h b/gat_stand_fw/periph/inc/ch32v20x_gpio.h new file mode 100644 index 0000000..04dfb51 --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_gpio.h @@ -0,0 +1,190 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_gpio.h + * Author : WCH + * Version : V1.0.0 + * Date : 2024/03/02 + * Description : This file contains all the functions prototypes for the + * GPIO firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_GPIO_H +#define __CH32V20x_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* Output Maximum frequency selection */ +typedef enum +{ + GPIO_Speed_10MHz = 1, + GPIO_Speed_2MHz, + GPIO_Speed_50MHz +} GPIOSpeed_TypeDef; + +/* Configuration Mode enumeration */ +typedef enum +{ + GPIO_Mode_AIN = 0x0, + GPIO_Mode_IN_FLOATING = 0x04, + GPIO_Mode_IPD = 0x28, + GPIO_Mode_IPU = 0x48, + GPIO_Mode_Out_OD = 0x14, + GPIO_Mode_Out_PP = 0x10, + GPIO_Mode_AF_OD = 0x1C, + GPIO_Mode_AF_PP = 0x18 +} GPIOMode_TypeDef; + +/* GPIO Init structure definition */ +typedef struct +{ + uint16_t GPIO_Pin; /* Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins_define */ + + GPIOSpeed_TypeDef GPIO_Speed; /* Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIOSpeed_TypeDef */ + + GPIOMode_TypeDef GPIO_Mode; /* Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIOMode_TypeDef */ +} GPIO_InitTypeDef; + +/* Bit_SET and Bit_RESET enumeration */ +typedef enum +{ + Bit_RESET = 0, + Bit_SET +} BitAction; + +/* GPIO_pins_define */ +#define GPIO_Pin_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_Pin_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_Pin_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_Pin_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_Pin_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_Pin_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_Pin_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_Pin_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_Pin_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_Pin_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_Pin_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_Pin_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_Pin_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_Pin_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_Pin_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_Pin_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_Pin_All ((uint16_t)0xFFFF) /* All pins selected */ + +/* GPIO_Remap_define */ +/* PCFR1 */ +#define GPIO_Remap_SPI1 ((uint32_t)0x00000001) /* SPI1 Alternate Function mapping */ +#define GPIO_Remap_I2C1 ((uint32_t)0x00000002) /* I2C1 Alternate Function mapping */ +#define GPIO_Remap_USART1 ((uint32_t)0x00000004) /* USART1 Alternate Function mapping low bit */ +#define GPIO_Remap_USART2 ((uint32_t)0x00000008) /* USART2 Alternate Function mapping */ +#define GPIO_PartialRemap_USART3 ((uint32_t)0x00140010) /* USART3 Partial Alternate Function mapping */ +#define GPIO_FullRemap_USART3 ((uint32_t)0x00140030) /* USART3 Full Alternate Function mapping */ +#define GPIO_PartialRemap_TIM1 ((uint32_t)0x00160040) /* TIM1 Partial Alternate Function mapping */ +#define GPIO_FullRemap_TIM1 ((uint32_t)0x001600C0) /* TIM1 Full Alternate Function mapping */ +#define GPIO_PartialRemap1_TIM2 ((uint32_t)0x00180100) /* TIM2 Partial1 Alternate Function mapping */ +#define GPIO_PartialRemap2_TIM2 ((uint32_t)0x00180200) /* TIM2 Partial2 Alternate Function mapping */ +#define GPIO_FullRemap_TIM2 ((uint32_t)0x00180300) /* TIM2 Full Alternate Function mapping */ +#define GPIO_PartialRemap_TIM3 ((uint32_t)0x001A0800) /* TIM3 Partial Alternate Function mapping */ +#define GPIO_FullRemap_TIM3 ((uint32_t)0x001A0C00) /* TIM3 Full Alternate Function mapping */ +#define GPIO_Remap_TIM4 ((uint32_t)0x00001000) /* TIM4 Alternate Function mapping */ +#define GPIO_Remap1_CAN1 ((uint32_t)0x001D4000) /* CAN1 Alternate Function mapping */ +#define GPIO_Remap2_CAN1 ((uint32_t)0x001D6000) /* CAN1 Alternate Function mapping */ +#define GPIO_Remap_PD01 ((uint32_t)0x00008000) /* PD01 Alternate Function mapping */ +#define GPIO_Remap_TIM5CH4_LSI ((uint32_t)0x00200001) /* LSI connected to TIM5 Channel4 input capture for calibration */ +#define GPIO_Remap_ADC1_ETRGINJ ((uint32_t)0x00200002) /* ADC1 External Trigger Injected Conversion remapping */ +#define GPIO_Remap_ADC1_ETRGREG ((uint32_t)0x00200004) /* ADC1 External Trigger Regular Conversion remapping */ +#define GPIO_Remap_ADC2_ETRGINJ ((uint32_t)0x00200008) /* ADC2 External Trigger Injected Conversion remapping */ +#define GPIO_Remap_ADC2_ETRGREG ((uint32_t)0x00200010) /* ADC2 External Trigger Regular Conversion remapping */ +#define GPIO_Remap_ETH ((uint32_t)0x00200020) /* Ethernet remapping (only for Connectivity line devices) */ +#define GPIO_Remap_CAN2 ((uint32_t)0x00200040) /* CAN2 remapping (only for Connectivity line devices) */ +#define GPIO_Remap_MII_RMII_SEL ((uint32_t)0x00200080) /* MII or RMII selection */ +#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /* Full SWJ Disabled */ +#define GPIO_Remap_SPI3 ((uint32_t)0x00201000) /* SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */ +#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /* Ethernet PTP output or USB OTG SOF (Start of Frame) connected \ + to TIM2 Internal Trigger 1 for calibration \ + (only for Connectivity line devices) */ +#define GPIO_Remap_PTP_PPS ((uint32_t)0x00204000) /* Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */ + +/* PCFR2 */ +#define GPIO_Remap_TIM8 ((uint32_t)0x80000004) /* TIM8 Alternate Function mapping */ +#define GPIO_PartialRemap_TIM9 ((uint32_t)0x80130008) /* TIM9 Partial Alternate Function mapping */ +#define GPIO_FullRemap_TIM9 ((uint32_t)0x80130010) /* TIM9 Full Alternate Function mapping */ +#define GPIO_PartialRemap_TIM10 ((uint32_t)0x80150020) /* TIM10 Partial Alternate Function mapping */ +#define GPIO_FullRemap_TIM10 ((uint32_t)0x80150040) /* TIM10 Full Alternate Function mapping */ +#define GPIO_Remap_FSMC_NADV ((uint32_t)0x80000400) /* FSMC_NADV Alternate Function mapping */ +#define GPIO_PartialRemap_USART4 ((uint32_t)0x80300001) /* USART4 Partial Alternate Function mapping */ +#define GPIO_FullRemap_USART4 ((uint32_t)0x80300002) /* USART4 Full Alternate Function mapping */ +#define GPIO_PartialRemap_USART5 ((uint32_t)0x80320004) /* USART5 Partial Alternate Function mapping */ +#define GPIO_FullRemap_USART5 ((uint32_t)0x80320008) /* USART5 Full Alternate Function mapping */ +#define GPIO_PartialRemap_USART6 ((uint32_t)0x80340010) /* USART6 Partial Alternate Function mapping */ +#define GPIO_FullRemap_USART6 ((uint32_t)0x80340020) /* USART6 Full Alternate Function mapping */ +#define GPIO_PartialRemap_USART7 ((uint32_t)0x80360040) /* USART7 Partial Alternate Function mapping */ +#define GPIO_FullRemap_USART7 ((uint32_t)0x80360080) /* USART7 Full Alternate Function mapping */ +#define GPIO_PartialRemap_USART8 ((uint32_t)0x80380100) /* USART8 Partial Alternate Function mapping */ +#define GPIO_FullRemap_USART8 ((uint32_t)0x80380200) /* USART8 Full Alternate Function mapping */ +#define GPIO_Remap_USART1_HighBit ((uint32_t)0x80200400) /* USART1 Alternate Function mapping high bit */ + +/* GPIO_Port_Sources */ +#define GPIO_PortSourceGPIOA ((uint8_t)0x00) +#define GPIO_PortSourceGPIOB ((uint8_t)0x01) +#define GPIO_PortSourceGPIOC ((uint8_t)0x02) +#define GPIO_PortSourceGPIOD ((uint8_t)0x03) +#define GPIO_PortSourceGPIOE ((uint8_t)0x04) +#define GPIO_PortSourceGPIOF ((uint8_t)0x05) +#define GPIO_PortSourceGPIOG ((uint8_t)0x06) + +/* GPIO_Pin_sources */ +#define GPIO_PinSource0 ((uint8_t)0x00) +#define GPIO_PinSource1 ((uint8_t)0x01) +#define GPIO_PinSource2 ((uint8_t)0x02) +#define GPIO_PinSource3 ((uint8_t)0x03) +#define GPIO_PinSource4 ((uint8_t)0x04) +#define GPIO_PinSource5 ((uint8_t)0x05) +#define GPIO_PinSource6 ((uint8_t)0x06) +#define GPIO_PinSource7 ((uint8_t)0x07) +#define GPIO_PinSource8 ((uint8_t)0x08) +#define GPIO_PinSource9 ((uint8_t)0x09) +#define GPIO_PinSource10 ((uint8_t)0x0A) +#define GPIO_PinSource11 ((uint8_t)0x0B) +#define GPIO_PinSource12 ((uint8_t)0x0C) +#define GPIO_PinSource13 ((uint8_t)0x0D) +#define GPIO_PinSource14 ((uint8_t)0x0E) +#define GPIO_PinSource15 ((uint8_t)0x0F) + +/* Ethernet_Media_Interface */ +#define GPIO_ETH_MediaInterface_MII ((u32)0x00000000) +#define GPIO_ETH_MediaInterface_RMII ((u32)0x00000001) + +void GPIO_DeInit(GPIO_TypeDef *GPIOx); +void GPIO_AFIODeInit(void); +void GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_InitStruct); +void GPIO_StructInit(GPIO_InitTypeDef *GPIO_InitStruct); +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadInputData(GPIO_TypeDef *GPIOx); +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadOutputData(GPIO_TypeDef *GPIOx); +void GPIO_SetBits(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void GPIO_ResetBits(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void GPIO_WriteBit(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, BitAction BitVal); +void GPIO_Write(GPIO_TypeDef *GPIOx, uint16_t PortVal); +void GPIO_PinLockConfig(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); +void GPIO_EventOutputCmd(FunctionalState NewState); +void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState); +void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); +void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface); +void GPIO_IPD_Unused(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_i2c.h b/gat_stand_fw/periph/inc/ch32v20x_i2c.h new file mode 100644 index 0000000..3722892 --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_i2c.h @@ -0,0 +1,429 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_i2c.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * I2C firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_I2C_H +#define __CH32V20x_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* I2C Init structure definition */ +typedef struct +{ + uint32_t I2C_ClockSpeed; /* Specifies the clock frequency. + This parameter must be set to a value lower than 400kHz */ + + uint16_t I2C_Mode; /* Specifies the I2C mode. + This parameter can be a value of @ref I2C_mode */ + + uint16_t I2C_DutyCycle; /* Specifies the I2C fast mode duty cycle. + This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ + + uint16_t I2C_OwnAddress1; /* Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint16_t I2C_Ack; /* Enables or disables the acknowledgement. + This parameter can be a value of @ref I2C_acknowledgement */ + + uint16_t I2C_AcknowledgedAddress; /* Specifies if 7-bit or 10-bit address is acknowledged. + This parameter can be a value of @ref I2C_acknowledged_address */ +} I2C_InitTypeDef; + +/* I2C_mode */ +#define I2C_Mode_I2C ((uint16_t)0x0000) +#define I2C_Mode_SMBusDevice ((uint16_t)0x0002) +#define I2C_Mode_SMBusHost ((uint16_t)0x000A) + +/* I2C_duty_cycle_in_fast_mode */ +#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /* I2C fast mode Tlow/Thigh = 16/9 */ +#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /* I2C fast mode Tlow/Thigh = 2 */ + +/* I2C_acknowledgement */ +#define I2C_Ack_Enable ((uint16_t)0x0400) +#define I2C_Ack_Disable ((uint16_t)0x0000) + +/* I2C_transfer_direction */ +#define I2C_Direction_Transmitter ((uint8_t)0x00) +#define I2C_Direction_Receiver ((uint8_t)0x01) + +/* I2C_acknowledged_address */ +#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000) +#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000) + +/* I2C_registers */ +#define I2C_Register_CTLR1 ((uint8_t)0x00) +#define I2C_Register_CTLR2 ((uint8_t)0x04) +#define I2C_Register_OADDR1 ((uint8_t)0x08) +#define I2C_Register_OADDR2 ((uint8_t)0x0C) +#define I2C_Register_DATAR ((uint8_t)0x10) +#define I2C_Register_STAR1 ((uint8_t)0x14) +#define I2C_Register_STAR2 ((uint8_t)0x18) +#define I2C_Register_CKCFGR ((uint8_t)0x1C) +#define I2C_Register_RTR ((uint8_t)0x20) + +/* I2C_SMBus_alert_pin_level */ +#define I2C_SMBusAlert_Low ((uint16_t)0x2000) +#define I2C_SMBusAlert_High ((uint16_t)0xDFFF) + +/* I2C_PEC_position */ +#define I2C_PECPosition_Next ((uint16_t)0x0800) +#define I2C_PECPosition_Current ((uint16_t)0xF7FF) + +/* I2C_NACK_position */ +#define I2C_NACKPosition_Next ((uint16_t)0x0800) +#define I2C_NACKPosition_Current ((uint16_t)0xF7FF) + +/* I2C_interrupts_definition */ +#define I2C_IT_BUF ((uint16_t)0x0400) +#define I2C_IT_EVT ((uint16_t)0x0200) +#define I2C_IT_ERR ((uint16_t)0x0100) + +/* I2C_interrupts_definition */ +#define I2C_IT_SMBALERT ((uint32_t)0x01008000) +#define I2C_IT_TIMEOUT ((uint32_t)0x01004000) +#define I2C_IT_PECERR ((uint32_t)0x01001000) +#define I2C_IT_OVR ((uint32_t)0x01000800) +#define I2C_IT_AF ((uint32_t)0x01000400) +#define I2C_IT_ARLO ((uint32_t)0x01000200) +#define I2C_IT_BERR ((uint32_t)0x01000100) +#define I2C_IT_TXE ((uint32_t)0x06000080) +#define I2C_IT_RXNE ((uint32_t)0x06000040) +#define I2C_IT_STOPF ((uint32_t)0x02000010) +#define I2C_IT_ADD10 ((uint32_t)0x02000008) +#define I2C_IT_BTF ((uint32_t)0x02000004) +#define I2C_IT_ADDR ((uint32_t)0x02000002) +#define I2C_IT_SB ((uint32_t)0x02000001) + +/* SR2 register flags */ +#define I2C_FLAG_DUALF ((uint32_t)0x00800000) +#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000) +#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000) +#define I2C_FLAG_GENCALL ((uint32_t)0x00100000) +#define I2C_FLAG_TRA ((uint32_t)0x00040000) +#define I2C_FLAG_BUSY ((uint32_t)0x00020000) +#define I2C_FLAG_MSL ((uint32_t)0x00010000) + +/* SR1 register flags */ +#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000) +#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000) +#define I2C_FLAG_PECERR ((uint32_t)0x10001000) +#define I2C_FLAG_OVR ((uint32_t)0x10000800) +#define I2C_FLAG_AF ((uint32_t)0x10000400) +#define I2C_FLAG_ARLO ((uint32_t)0x10000200) +#define I2C_FLAG_BERR ((uint32_t)0x10000100) +#define I2C_FLAG_TXE ((uint32_t)0x10000080) +#define I2C_FLAG_RXNE ((uint32_t)0x10000040) +#define I2C_FLAG_STOPF ((uint32_t)0x10000010) +#define I2C_FLAG_ADD10 ((uint32_t)0x10000008) +#define I2C_FLAG_BTF ((uint32_t)0x10000004) +#define I2C_FLAG_ADDR ((uint32_t)0x10000002) +#define I2C_FLAG_SB ((uint32_t)0x10000001) + +/****************I2C Master Events (Events grouped in order of communication)********************/ + +/******************************************************************************************************************** + * @brief Start communicate + * + * After master use I2C_GenerateSTART() function sending the START condition,the master + * has to wait for event 5(the Start condition has been correctly + * released on the I2C bus ). + * + */ +/* EVT5 */ +#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */ + +/******************************************************************************************************************** + * @brief Address Acknowledge + * + * When start condition correctly released on the bus(check EVT5), the + * master use I2C_Send7bitAddress() function sends the address of the slave(s) with which it will communicate + * it also determines master as transmitter or Receiver. Then the master has to wait that a slave acknowledges + * his address. If an acknowledge is sent on the bus, one of the following events will be set: + * + * + * + * 1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED + * event is set. + * + * 2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED + * is set + * + * 3) In case of 10-Bit addressing mode, the master (after generating the START + * and checking on EVT5) use I2C_SendData() function send the header of 10-bit addressing mode. + * Then master wait EVT9. EVT9 means that the 10-bit addressing header has been correctly sent + * on the bus. Then master should use the function I2C_Send7bitAddress() to send the second part + * of the 10-bit address (LSB) . Then master should wait for event 6. + * + * + */ + +/* EVT6 */ +#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */ +#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */ +/*EVT9 */ +#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */ + +/******************************************************************************************************************** + * @brief Communication events + * + * If START condition has generated and slave address + * been acknowledged. then the master has to check one of the following events for + * communication procedures: + * + * 1) Master Receiver mode: The master has to wait on the event EVT7 then use + * I2C_ReceiveData() function to read the data received from the slave . + * + * 2) Master Transmitter mode: The master use I2C_SendData() function to send data + * then to wait on event EVT8 or EVT8_2. + * These two events are similar: + * - EVT8 means that the data has been written in the data register and is + * being shifted out. + * - EVT8_2 means that the data has been physically shifted out and output + * on the bus. + * In most cases, using EVT8 is sufficient for the application. + * Using EVT8_2 will leads to a slower communication speed but will more reliable . + * EVT8_2 is also more suitable than EVT8 for testing on the last data transmission + * + * + * Note: + * In case the user software does not guarantee that this event EVT7 is managed before + * the current byte end of transfer, then user may check on I2C_EVENT_MASTER_BYTE_RECEIVED + * and I2C_FLAG_BTF flag at the same time .But in this case the communication may be slower. + * + * + */ + +/* Master Receive mode */ +/* EVT7 */ +#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */ + +/* Master Transmitter mode*/ +/* EVT8 */ +#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */ +/* EVT8_2 */ +#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */ + +/******************I2C Slave Events (Events grouped in order of communication)******************/ + +/******************************************************************************************************************** + * @brief Start Communicate events + * + * Wait on one of these events at the start of the communication. It means that + * the I2C peripheral detected a start condition of master device generate on the bus. + * If the acknowledge feature is enabled through function I2C_AcknowledgeConfig()),The peripheral generates an ACK condition on the bus. + * + * + * + * a) In normal case (only one address managed by the slave), when the address + * sent by the master matches the own address of the peripheral (configured by + * I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set + * (where XXX could be TRANSMITTER or RECEIVER). + * + * b) In case the address sent by the master matches the second address of the + * peripheral (configured by the function I2C_OwnAddress2Config() and enabled + * by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED + * (where XXX could be TRANSMITTER or RECEIVER) are set. + * + * c) In case the address sent by the master is General Call (address 0x00) and + * if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd()) + * the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED. + * + */ + +/* EVT1 */ +/* a) Case of One Single Address managed by the slave */ +#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ + +/* b) Case of Dual address managed by the slave */ +#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */ + +/* c) Case of General Call enabled for the slave */ +#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */ + +/******************************************************************************************************************** + * @brief Communication events + * + * Wait on one of these events when EVT1 has already been checked : + * + * - Slave Receiver mode: + * - EVT2--The device is expecting to receive a data byte . + * - EVT4--The device is expecting the end of the communication: master + * sends a stop condition and data transmission is stopped. + * + * - Slave Transmitter mode: + * - EVT3--When a byte has been transmitted by the slave and the Master is expecting + * the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and + * I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. If the user software doesn't guarantee + * the EVT3 is managed before the current byte end of transfer The second one can optionally + * be used. + * - EVT3_2--When the master sends a NACK to tell slave device that data transmission + * shall end . The slave device has to stop sending + * data bytes and wait a Stop condition from bus. + * + * Note: + * If the user software does not guarantee that the event 2 is + * managed before the current byte end of transfer, User may check on I2C_EVENT_SLAVE_BYTE_RECEIVED + * and I2C_FLAG_BTF flag at the same time . + * In this case the communication will be slower. + * + */ + +/* Slave Receiver mode*/ +/* EVT2 */ +#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */ +/* EVT4 */ +#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */ + +/* Slave Transmitter mode*/ +/* EVT3 */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */ +/*EVT3_2 */ +#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */ + + +void I2C_DeInit(I2C_TypeDef *I2Cx); +void I2C_Init(I2C_TypeDef *I2Cx, I2C_InitTypeDef *I2C_InitStruct); +void I2C_StructInit(I2C_InitTypeDef *I2C_InitStruct); +void I2C_Cmd(I2C_TypeDef *I2Cx, FunctionalState NewState); +void I2C_DMACmd(I2C_TypeDef *I2Cx, FunctionalState NewState); +void I2C_DMALastTransferCmd(I2C_TypeDef *I2Cx, FunctionalState NewState); +void I2C_GenerateSTART(I2C_TypeDef *I2Cx, FunctionalState NewState); +void I2C_GenerateSTOP(I2C_TypeDef *I2Cx, FunctionalState NewState); +void I2C_AcknowledgeConfig(I2C_TypeDef *I2Cx, FunctionalState NewState); +void I2C_OwnAddress2Config(I2C_TypeDef *I2Cx, uint8_t Address); +void I2C_DualAddressCmd(I2C_TypeDef *I2Cx, FunctionalState NewState); +void I2C_GeneralCallCmd(I2C_TypeDef *I2Cx, FunctionalState NewState); +void I2C_ITConfig(I2C_TypeDef *I2Cx, uint16_t I2C_IT, FunctionalState NewState); +void I2C_SendData(I2C_TypeDef *I2Cx, uint8_t Data); +uint8_t I2C_ReceiveData(I2C_TypeDef *I2Cx); +void I2C_Send7bitAddress(I2C_TypeDef *I2Cx, uint8_t Address, uint8_t I2C_Direction); +uint16_t I2C_ReadRegister(I2C_TypeDef *I2Cx, uint8_t I2C_Register); +void I2C_SoftwareResetCmd(I2C_TypeDef *I2Cx, FunctionalState NewState); +void I2C_NACKPositionConfig(I2C_TypeDef *I2Cx, uint16_t I2C_NACKPosition); +void I2C_SMBusAlertConfig(I2C_TypeDef *I2Cx, uint16_t I2C_SMBusAlert); +void I2C_TransmitPEC(I2C_TypeDef *I2Cx, FunctionalState NewState); +void I2C_PECPositionConfig(I2C_TypeDef *I2Cx, uint16_t I2C_PECPosition); +void I2C_CalculatePEC(I2C_TypeDef *I2Cx, FunctionalState NewState); +uint8_t I2C_GetPEC(I2C_TypeDef *I2Cx); +void I2C_ARPCmd(I2C_TypeDef *I2Cx, FunctionalState NewState); +void I2C_StretchClockCmd(I2C_TypeDef *I2Cx, FunctionalState NewState); +void I2C_FastModeDutyCycleConfig(I2C_TypeDef *I2Cx, uint16_t I2C_DutyCycle); + + +/***************************************************************************************** + * + * I2C State Monitoring Functions + * + **************************************************************************************** + * This I2C driver provides three different ways for I2C state monitoring + * profit the application requirements and constraints: + * + * + * a) First way: + * Using I2C_CheckEvent() function: + * It compares the status registers (STARR1 and STAR2) content to a given event + * (can be the combination of more flags). + * If the current status registers includes the given flags will return SUCCESS. + * and if the current status registers miss flags will returns ERROR. + * - When to use: + * - This function is suitable for most applications as well as for startup + * activity since the events are fully described in the product reference manual + * (CH32FV2x-V3xRM). + * - It is also suitable for users who need to define their own events. + * - Limitations: + * - If an error occurs besides to the monitored error, + * the I2C_CheckEvent() function may return SUCCESS despite the communication + * in corrupted state. it is suggeted to use error interrupts to monitor the error + * events and handle them in IRQ handler. + * + * + * Note: + * The following functions are recommended for error management: : + * - I2C_ITConfig() main function of configure and enable the error interrupts. + * - I2Cx_ER_IRQHandler() will be called when the error interrupt happen. + * Where x is the peripheral instance (I2C1, I2C2 ...) + * - I2Cx_ER_IRQHandler() will call I2C_GetFlagStatus() or I2C_GetITStatus() functions + * to determine which error occurred. + * - I2C_ClearFlag() \ I2C_ClearITPendingBit() \ I2C_SoftwareResetCmd() + * \ I2C_GenerateStop() will be use to clear the error flag and source, + * and return to correct communication status. + * + * + * b) Second way: + * Using the function to get a single word(uint32_t) composed of status register 1 and register 2. + * (Status Register 2 value is shifted left by 16 bits and concatenated to Status Register 1). + * - When to use: + * + * - This function is suitable for the same applications above but it + * don't have the limitations of I2C_GetFlagStatus() function . + * The returned value could be compared to events already defined in the + * library (CH32V20x_i2c.h) or to custom values defined by user. + * - This function can be used to monitor the status of multiple flags simultaneously. + * - Contrary to the I2C_CheckEvent () function, this function can choose the time to + * accept the event according to the user's needs (when all event flags are set and + * no other flags are set, or only when the required flags are set) + * + * - Limitations: + * - User may need to define his own events. + * - Same remark concerning the error management is applicable for this + * function if user decides to check only regular communication flags (and + * ignores error flags). + * + * + * c) Third way: + * Using the function I2C_GetFlagStatus() get the status of + * one single flag . + * - When to use: + * - This function could be used for specific applications or in debug phase. + * - It is suitable when only one flag checking is needed . + * + * - Limitations: + * - Call this function to access the status register. Some flag bits may be cleared. + * - Function may need to be called twice or more in order to monitor one single event. + */ + + + +/********************************************************* + * + * a) Basic state monitoring(First way) + ******************************************************** + */ +ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT); +/********************************************************* + * + * b) Advanced state monitoring(Second way:) + ******************************************************** + */ +uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx); +/********************************************************* + * + * c) Flag-based state monitoring(Third way) + ********************************************************* + */ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); + +void I2C_ClearFlag(I2C_TypeDef *I2Cx, uint32_t I2C_FLAG); +ITStatus I2C_GetITStatus(I2C_TypeDef *I2Cx, uint32_t I2C_IT); +void I2C_ClearITPendingBit(I2C_TypeDef *I2Cx, uint32_t I2C_IT); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_iwdg.h b/gat_stand_fw/periph/inc/ch32v20x_iwdg.h new file mode 100644 index 0000000..616b44e --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_iwdg.h @@ -0,0 +1,50 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_iwdg.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * IWDG firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_IWDG_H +#define __CH32V20x_IWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* IWDG_WriteAccess */ +#define IWDG_WriteAccess_Enable ((uint16_t)0x5555) +#define IWDG_WriteAccess_Disable ((uint16_t)0x0000) + +/* IWDG_prescaler */ +#define IWDG_Prescaler_4 ((uint8_t)0x00) +#define IWDG_Prescaler_8 ((uint8_t)0x01) +#define IWDG_Prescaler_16 ((uint8_t)0x02) +#define IWDG_Prescaler_32 ((uint8_t)0x03) +#define IWDG_Prescaler_64 ((uint8_t)0x04) +#define IWDG_Prescaler_128 ((uint8_t)0x05) +#define IWDG_Prescaler_256 ((uint8_t)0x06) + +/* IWDG_Flag */ +#define IWDG_FLAG_PVU ((uint16_t)0x0001) +#define IWDG_FLAG_RVU ((uint16_t)0x0002) + +void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess); +void IWDG_SetPrescaler(uint8_t IWDG_Prescaler); +void IWDG_SetReload(uint16_t Reload); +void IWDG_ReloadCounter(void); +void IWDG_Enable(void); +FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_misc.h b/gat_stand_fw/periph/inc/ch32v20x_misc.h new file mode 100644 index 0000000..2b67c97 --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_misc.h @@ -0,0 +1,72 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_misc.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * miscellaneous firmware library functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_MISC_H +#define __CH32V20x_MISC_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* CSR_INTSYSCR_INEST_definition */ +#define INTSYSCR_INEST_NoEN 0x00 /* interrupt nesting disable(CSR-0x804 bit1 = 0) */ +#define INTSYSCR_INEST_EN 0x01 /* interrupt nesting enable(CSR-0x804 bit1 = 1) */ + +/* Check the configuration of CSR(0x804) in the startup file(.S) + * interrupt nesting enable(CSR-0x804 bit1 = 1) + * priority - bit[7] - Preemption Priority + * bit[6:5] - Sub priority + * bit[4:0] - Reserve + * interrupt nesting disable(CSR-0x804 bit1 = 0) + * priority - bit[7:5] - Sub priority + * bit[4:0] - Reserve + */ + +#ifndef INTSYSCR_INEST +#define INTSYSCR_INEST INTSYSCR_INEST_EN +#endif + +/* NVIC Init Structure definition + * interrupt nesting enable(CSR-0x804 bit1 = 1) + * NVIC_IRQChannelPreemptionPriority - range from 0 to 1. + * NVIC_IRQChannelSubPriority - range from 0 to 3. + * + * interrupt nesting disable(CSR-0x804 bit1 = 0) + * NVIC_IRQChannelPreemptionPriority - range is 0. + * NVIC_IRQChannelSubPriority - range from 0 to 7. + * + */ +typedef struct +{ + uint8_t NVIC_IRQChannel; + uint8_t NVIC_IRQChannelPreemptionPriority; + uint8_t NVIC_IRQChannelSubPriority; + FunctionalState NVIC_IRQChannelCmd; +} NVIC_InitTypeDef; + +/* Preemption_Priority_Group */ +#if (INTSYSCR_INEST == INTSYSCR_INEST_NoEN) +#define NVIC_PriorityGroup_0 ((uint32_t)0x00) /* interrupt nesting disable(CSR-0x804 bit1 = 0) */ +#else +#define NVIC_PriorityGroup_1 ((uint32_t)0x01) /* interrupt nesting enable(CSR-0x804 bit1 = 1) */ +#endif + +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup); +void NVIC_Init(NVIC_InitTypeDef *NVIC_InitStruct); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_opa.h b/gat_stand_fw/periph/inc/ch32v20x_opa.h new file mode 100644 index 0000000..9ebc04b --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_opa.h @@ -0,0 +1,74 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_opa.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * OPA firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_OPA_H +#define __CH32V20x_OPA_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +#define OPA_PSEL_OFFSET 3 +#define OPA_NSEL_OFFSET 2 +#define OPA_MODE_OFFSET 1 + +/* OPA member enumeration */ +typedef enum +{ + OPA1 = 0, + OPA2, + OPA3, + OPA4 +} OPA_Num_TypeDef; + +/* OPA PSEL enumeration */ +typedef enum +{ + CHP0 = 0, + CHP1 +} OPA_PSEL_TypeDef; + +/* OPA NSEL enumeration */ +typedef enum +{ + CHN0 = 0, + CHN1 +} OPA_NSEL_TypeDef; + +/* OPA out channel enumeration */ +typedef enum +{ + OUT_IO_OUT0 = 0, + OUT_IO_OUT1 +} OPA_Mode_TypeDef; + +/* OPA Init Structure definition */ +typedef struct +{ + OPA_Num_TypeDef OPA_NUM; /* Specifies the members of OPA */ + OPA_PSEL_TypeDef PSEL; /* Specifies the positive channel of OPA */ + OPA_NSEL_TypeDef NSEL; /* Specifies the negative channel of OPA */ + OPA_Mode_TypeDef Mode; /* Specifies the mode of OPA */ +} OPA_InitTypeDef; + +void OPA_DeInit(void); +void OPA_Init(OPA_InitTypeDef *OPA_InitStruct); +void OPA_StructInit(OPA_InitTypeDef *OPA_InitStruct); +void OPA_Cmd(OPA_Num_TypeDef OPA_NUM, FunctionalState NewState); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_pwr.h b/gat_stand_fw/periph/inc/ch32v20x_pwr.h new file mode 100644 index 0000000..8758788 --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_pwr.h @@ -0,0 +1,64 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_pwr.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the PWR + * firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_PWR_H +#define __CH32V20x_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* PVD_detection_level */ +#define PWR_PVDLevel_2V2 ((uint32_t)0x00000000) +#define PWR_PVDLevel_2V3 ((uint32_t)0x00000020) +#define PWR_PVDLevel_2V4 ((uint32_t)0x00000040) +#define PWR_PVDLevel_2V5 ((uint32_t)0x00000060) +#define PWR_PVDLevel_2V6 ((uint32_t)0x00000080) +#define PWR_PVDLevel_2V7 ((uint32_t)0x000000A0) +#define PWR_PVDLevel_2V8 ((uint32_t)0x000000C0) +#define PWR_PVDLevel_2V9 ((uint32_t)0x000000E0) + +/* Regulator_state_is_STOP_mode */ +#define PWR_Regulator_ON ((uint32_t)0x00000000) +#define PWR_Regulator_LowPower ((uint32_t)0x00000001) + +/* STOP_mode_entry */ +#define PWR_STOPEntry_WFI ((uint8_t)0x01) +#define PWR_STOPEntry_WFE ((uint8_t)0x02) + +/* PWR_Flag */ +#define PWR_FLAG_WU ((uint32_t)0x00000001) +#define PWR_FLAG_SB ((uint32_t)0x00000002) +#define PWR_FLAG_PVDO ((uint32_t)0x00000004) + +void PWR_DeInit(void); +void PWR_BackupAccessCmd(FunctionalState NewState); +void PWR_PVDCmd(FunctionalState NewState); +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); +void PWR_WakeUpPinCmd(FunctionalState NewState); +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); +void PWR_EnterSTANDBYMode(void); +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG); +void PWR_ClearFlag(uint32_t PWR_FLAG); +void PWR_EnterSTANDBYMode_RAM(void); +void PWR_EnterSTANDBYMode_RAM_LV(void); +void PWR_EnterSTANDBYMode_RAM_VBAT_EN(void); +void PWR_EnterSTANDBYMode_RAM_LV_VBAT_EN(void); +void PWR_EnterSTOPMode_RAM_LV(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_rcc.h b/gat_stand_fw/periph/inc/ch32v20x_rcc.h new file mode 100644 index 0000000..343006c --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_rcc.h @@ -0,0 +1,263 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_rcc.h + * Author : WCH + * Version : V1.0.0 + * Date : 2024/02/21 + * Description : This file provides all the RCC firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_RCC_H +#define __CH32V20x_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* RCC_Exported_Types */ +typedef struct +{ + uint32_t SYSCLK_Frequency; /* returns SYSCLK clock frequency expressed in Hz */ + uint32_t HCLK_Frequency; /* returns HCLK clock frequency expressed in Hz */ + uint32_t PCLK1_Frequency; /* returns PCLK1 clock frequency expressed in Hz */ + uint32_t PCLK2_Frequency; /* returns PCLK2 clock frequency expressed in Hz */ + uint32_t ADCCLK_Frequency; /* returns ADCCLK clock frequency expressed in Hz */ +} RCC_ClocksTypeDef; + +/* HSE_configuration */ +#define RCC_HSE_OFF ((uint32_t)0x00000000) +#define RCC_HSE_ON ((uint32_t)0x00010000) +#define RCC_HSE_Bypass ((uint32_t)0x00040000) + +/* PLL_entry_clock_source */ +#define RCC_PLLSource_HSI_Div2 ((uint32_t)0x00000000) +#define RCC_PLLSource_HSE_Div1 ((uint32_t)0x00010000) +#define RCC_PLLSource_HSE_Div2 ((uint32_t)0x00030000) + +/* PLL_multiplication_factor for other CH32V20x */ +#define RCC_PLLMul_2 ((uint32_t)0x00000000) +#define RCC_PLLMul_3 ((uint32_t)0x00040000) +#define RCC_PLLMul_4 ((uint32_t)0x00080000) +#define RCC_PLLMul_5 ((uint32_t)0x000C0000) +#define RCC_PLLMul_6 ((uint32_t)0x00100000) +#define RCC_PLLMul_7 ((uint32_t)0x00140000) +#define RCC_PLLMul_8 ((uint32_t)0x00180000) +#define RCC_PLLMul_9 ((uint32_t)0x001C0000) +#define RCC_PLLMul_10 ((uint32_t)0x00200000) +#define RCC_PLLMul_11 ((uint32_t)0x00240000) +#define RCC_PLLMul_12 ((uint32_t)0x00280000) +#define RCC_PLLMul_13 ((uint32_t)0x002C0000) +#define RCC_PLLMul_14 ((uint32_t)0x00300000) +#define RCC_PLLMul_15 ((uint32_t)0x00340000) +#define RCC_PLLMul_16 ((uint32_t)0x00380000) +#define RCC_PLLMul_18 ((uint32_t)0x003C0000) + +/* System_clock_source */ +#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000) +#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001) +#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002) + +/* AHB_clock_source */ +#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000) +#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080) +#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090) +#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0) +#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0) +#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0) +#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0) +#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0) +#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0) + +/* APB1_APB2_clock_source */ +#define RCC_HCLK_Div1 ((uint32_t)0x00000000) +#define RCC_HCLK_Div2 ((uint32_t)0x00000400) +#define RCC_HCLK_Div4 ((uint32_t)0x00000500) +#define RCC_HCLK_Div8 ((uint32_t)0x00000600) +#define RCC_HCLK_Div16 ((uint32_t)0x00000700) + +/* RCC_Interrupt_source */ +#define RCC_IT_LSIRDY ((uint8_t)0x01) +#define RCC_IT_LSERDY ((uint8_t)0x02) +#define RCC_IT_HSIRDY ((uint8_t)0x04) +#define RCC_IT_HSERDY ((uint8_t)0x08) +#define RCC_IT_PLLRDY ((uint8_t)0x10) +#define RCC_IT_CSS ((uint8_t)0x80) + +/* USB_Device_clock_source */ +#define RCC_USBCLKSource_PLLCLK_Div1 ((uint8_t)0x00) +#define RCC_USBCLKSource_PLLCLK_Div2 ((uint8_t)0x01) +#define RCC_USBCLKSource_PLLCLK_Div3 ((uint8_t)0x02) + +#ifdef CH32V20x_D8W + #define RCC_USBCLKSource_PLLCLK_Div5 ((uint8_t)0x03) + +#endif + +/* ADC_clock_source */ +#define RCC_PCLK2_Div2 ((uint32_t)0x00000000) +#define RCC_PCLK2_Div4 ((uint32_t)0x00004000) +#define RCC_PCLK2_Div6 ((uint32_t)0x00008000) +#define RCC_PCLK2_Div8 ((uint32_t)0x0000C000) + +/* LSE_configuration */ +#define RCC_LSE_OFF ((uint8_t)0x00) +#define RCC_LSE_ON ((uint8_t)0x01) +#define RCC_LSE_Bypass ((uint8_t)0x04) + +/* RTC_clock_source */ +#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100) +#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200) + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) +#define RCC_RTCCLKSource_HSE_Div512 ((uint32_t)0x00000300) +#else +#define RCC_RTCCLKSource_HSE_Div128 ((uint32_t)0x00000300) +#endif + +/* AHB_peripheral */ +#define RCC_AHBPeriph_DMA1 ((uint32_t)0x00000001) +#define RCC_AHBPeriph_DMA2 ((uint32_t)0x00000002) +#define RCC_AHBPeriph_SRAM ((uint32_t)0x00000004) +#define RCC_AHBPeriph_CRC ((uint32_t)0x00000040) +#define RCC_AHBPeriph_FSMC ((uint32_t)0x00000100) +#define RCC_AHBPeriph_RNG ((uint32_t)0x00000200) +#define RCC_AHBPeriph_SDIO ((uint32_t)0x00000400) +#define RCC_AHBPeriph_USBHS ((uint32_t)0x00000800) +#define RCC_AHBPeriph_USBFS ((uint32_t)0x00001000) +#define RCC_AHBPeriph_OTG_FS RCC_AHBPeriph_USBFS + +#ifdef CH32V20x_D8W +#define RCC_AHBPeriph_BLE_CRC ((uint32_t)0x00030040) +#endif + +/* APB2_peripheral */ +#define RCC_APB2Periph_AFIO ((uint32_t)0x00000001) +#define RCC_APB2Periph_GPIOA ((uint32_t)0x00000004) +#define RCC_APB2Periph_GPIOB ((uint32_t)0x00000008) +#define RCC_APB2Periph_GPIOC ((uint32_t)0x00000010) +#define RCC_APB2Periph_GPIOD ((uint32_t)0x00000020) +#define RCC_APB2Periph_GPIOE ((uint32_t)0x00000040) +#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000200) +#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000400) +#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000800) +#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000) +#define RCC_APB2Periph_TIM8 ((uint32_t)0x00002000) +#define RCC_APB2Periph_USART1 ((uint32_t)0x00004000) +#define RCC_APB2Periph_TIM9 ((uint32_t)0x00080000) +#define RCC_APB2Periph_TIM10 ((uint32_t)0x00100000) + +/* APB1_peripheral */ +#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001) +#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002) +#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004) +#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008) +#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010) +#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020) +#define RCC_APB1Periph_UART6 ((uint32_t)0x00000040) +#define RCC_APB1Periph_UART7 ((uint32_t)0x00000080) +#define RCC_APB1Periph_UART8 ((uint32_t)0x00000100) +#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800) +#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000) +#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000) +#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000) +#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000) +#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000) +#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000) +#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000) +#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000) +#define RCC_APB1Periph_USB ((uint32_t)0x00800000) +#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000) +#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000) +#define RCC_APB1Periph_BKP ((uint32_t)0x08000000) +#define RCC_APB1Periph_PWR ((uint32_t)0x10000000) +#define RCC_APB1Periph_DAC ((uint32_t)0x20000000) + +/* Clock_source_to_output_on_MCO_pin */ +#define RCC_MCO_NoClock ((uint8_t)0x00) +#define RCC_MCO_SYSCLK ((uint8_t)0x04) +#define RCC_MCO_HSI ((uint8_t)0x05) +#define RCC_MCO_HSE ((uint8_t)0x06) +#define RCC_MCO_PLLCLK_Div2 ((uint8_t)0x07) + +/* RCC_Flag */ +#define RCC_FLAG_HSIRDY ((uint8_t)0x21) +#define RCC_FLAG_HSERDY ((uint8_t)0x31) +#define RCC_FLAG_PLLRDY ((uint8_t)0x39) +#define RCC_FLAG_LSERDY ((uint8_t)0x41) +#define RCC_FLAG_LSIRDY ((uint8_t)0x61) +#define RCC_FLAG_PINRST ((uint8_t)0x7A) +#define RCC_FLAG_PORRST ((uint8_t)0x7B) +#define RCC_FLAG_SFTRST ((uint8_t)0x7C) +#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) +#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) +#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) + +/* SysTick_clock_source */ +#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB) +#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004) + +/* USBFS_clock_source */ +#define RCC_USBPLL_Div1 ((uint32_t)0x00) +#define RCC_USBPLL_Div2 ((uint32_t)0x01) +#define RCC_USBPLL_Div3 ((uint32_t)0x02) +#define RCC_USBPLL_Div4 ((uint32_t)0x03) +#define RCC_USBPLL_Div5 ((uint32_t)0x04) +#define RCC_USBPLL_Div6 ((uint32_t)0x05) +#define RCC_USBPLL_Div7 ((uint32_t)0x06) +#define RCC_USBPLL_Div8 ((uint32_t)0x07) + +/* ETH_clock_source */ +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) + #define RCC_ETHCLK_Div1 ((uint32_t)0x00) + #define RCC_ETHCLK_Div2 ((uint32_t)0x01) + +#endif + +void RCC_DeInit(void); +void RCC_HSEConfig(uint32_t RCC_HSE); +ErrorStatus RCC_WaitForHSEStartUp(void); +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue); +void RCC_HSICmd(FunctionalState NewState); +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul); +void RCC_PLLCmd(FunctionalState NewState); +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource); +uint8_t RCC_GetSYSCLKSource(void); +void RCC_HCLKConfig(uint32_t RCC_SYSCLK); +void RCC_PCLK1Config(uint32_t RCC_HCLK); +void RCC_PCLK2Config(uint32_t RCC_HCLK); +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState); +void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource); +void RCC_ADCCLKConfig(uint32_t RCC_PCLK2); +void RCC_LSEConfig(uint8_t RCC_LSE); +void RCC_LSICmd(FunctionalState NewState); +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource); +void RCC_RTCCLKCmd(FunctionalState NewState); +void RCC_GetClocksFreq(RCC_ClocksTypeDef *RCC_Clocks); +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); +void RCC_BackupResetCmd(FunctionalState NewState); +void RCC_ClockSecuritySystemCmd(FunctionalState NewState); +void RCC_MCOConfig(uint8_t RCC_MCO); +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG); +void RCC_ClearFlag(void); +ITStatus RCC_GetITStatus(uint8_t RCC_IT); +void RCC_ClearITPendingBit(uint8_t RCC_IT); +void RCC_ADCCLKADJcmd(FunctionalState NewState); + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) +void RCC_ETHDIVConfig(uint32_t RCC_ETHPRE_Div); + +#endif + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_rtc.h b/gat_stand_fw/periph/inc/ch32v20x_rtc.h new file mode 100644 index 0000000..cddc6d4 --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_rtc.h @@ -0,0 +1,98 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_rtc.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the RTC + * firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_RTC_H +#define __CH32V20x_RTC_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +typedef enum +{ + Level_32 = 2, + Level_64, + Level_128, + +} Cali_LevelTypeDef; + +/* RTC_interrupts_define */ +#define RTC_IT_OW ((uint16_t)0x0004) /* Overflow interrupt */ +#define RTC_IT_ALR ((uint16_t)0x0002) /* Alarm interrupt */ +#define RTC_IT_SEC ((uint16_t)0x0001) /* Second interrupt */ + +/* RTC_interrupts_flags */ +#define RTC_FLAG_RTOFF ((uint16_t)0x0020) /* RTC Operation OFF flag */ +#define RTC_FLAG_RSF ((uint16_t)0x0008) /* Registers Synchronized flag */ +#define RTC_FLAG_OW ((uint16_t)0x0004) /* Overflow flag */ +#define RTC_FLAG_ALR ((uint16_t)0x0002) /* Alarm flag */ +#define RTC_FLAG_SEC ((uint16_t)0x0001) /* Second flag */ + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) +#define RB_OSC32K_HTUNE (0x1FE0) +#define RB_OSC32K_LTUNE (0x1F) + +#define RB_OSC_CAL_HALT (0x80) +#define RB_OSC_CAL_EN (0x02) +#define RB_OSC_CAL_INT_EN (0x01) + +#define RB_OSC_CAL_OV_CNT (0xFF) + +#define RB_OSC_CAL_IF_END (1 << 15) +#define RB_OSC_CAL_CNT_OV (1 << 14) +#define RB_OSC_CAL_CNT (0x3FFF) + +#define RB_CAL_LP_EN (1 << 6) +#define RB_CAL_WKUP_EN (1 << 5) +#define RB_OSC_HALT_MD (1 << 4) +#define RB_OSC_CNT_VLU (0x0F) + + +#ifdef CLK_OSC32K +#if ( CLK_OSC32K == 1 ) +#define CAB_LSIFQ 32000 +#else +#define CAB_LSIFQ 32768 +#endif +#else +#define CAB_LSIFQ 32000 +#endif +#endif + + +void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState); +void RTC_EnterConfigMode(void); +void RTC_ExitConfigMode(void); +uint32_t RTC_GetCounter(void); +void RTC_SetCounter(uint32_t CounterValue); +void RTC_SetPrescaler(uint32_t PrescalerValue); +void RTC_SetAlarm(uint32_t AlarmValue); +uint32_t RTC_GetDivider(void); +void RTC_WaitForLastTask(void); +void RTC_WaitForSynchro(void); +FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG); +void RTC_ClearFlag(uint16_t RTC_FLAG); +ITStatus RTC_GetITStatus(uint16_t RTC_IT); +void RTC_ClearITPendingBit(uint16_t RTC_IT); + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) +void Calibration_LSI(Cali_LevelTypeDef cali_Lv); + +#endif + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_spi.h b/gat_stand_fw/periph/inc/ch32v20x_spi.h new file mode 100644 index 0000000..2a676dd --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_spi.h @@ -0,0 +1,220 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_spi.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * SPI firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_SPI_H +#define __CH32V20x_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* SPI Init structure definition */ +typedef struct +{ + uint16_t SPI_Direction; /* Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_data_direction */ + + uint16_t SPI_Mode; /* Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_mode */ + + uint16_t SPI_DataSize; /* Specifies the SPI data size. + This parameter can be a value of @ref SPI_data_size */ + + uint16_t SPI_CPOL; /* Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint16_t SPI_CPHA; /* Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint16_t SPI_NSS; /* Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint16_t SPI_BaudRatePrescaler; /* Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler. + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint16_t SPI_FirstBit; /* Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint16_t SPI_CRCPolynomial; /* Specifies the polynomial used for the CRC calculation. */ +} SPI_InitTypeDef; + +/* I2S Init structure definition */ +typedef struct +{ + uint16_t I2S_Mode; /* Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint16_t I2S_Standard; /* Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint16_t I2S_DataFormat; /* Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint16_t I2S_MCLKOutput; /* Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t I2S_AudioFreq; /* Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint16_t I2S_CPOL; /* Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ +} I2S_InitTypeDef; + +/* SPI_data_direction */ +#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) +#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) +#define SPI_Direction_1Line_Rx ((uint16_t)0x8000) +#define SPI_Direction_1Line_Tx ((uint16_t)0xC000) + +/* SPI_mode */ +#define SPI_Mode_Master ((uint16_t)0x0104) +#define SPI_Mode_Slave ((uint16_t)0x0000) + +/* SPI_data_size */ +#define SPI_DataSize_16b ((uint16_t)0x0800) +#define SPI_DataSize_8b ((uint16_t)0x0000) + +/* SPI_Clock_Polarity */ +#define SPI_CPOL_Low ((uint16_t)0x0000) +#define SPI_CPOL_High ((uint16_t)0x0002) + +/* SPI_Clock_Phase */ +#define SPI_CPHA_1Edge ((uint16_t)0x0000) +#define SPI_CPHA_2Edge ((uint16_t)0x0001) + +/* SPI_Slave_Select_management */ +#define SPI_NSS_Soft ((uint16_t)0x0200) +#define SPI_NSS_Hard ((uint16_t)0x0000) + +/* SPI_BaudRate_Prescaler */ +#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) +#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) +#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) +#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) +#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) +#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) +#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) +#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) + +/* SPI_MSB_LSB_transmission */ +#define SPI_FirstBit_MSB ((uint16_t)0x0000) +#define SPI_FirstBit_LSB ((uint16_t)0x0080) + +/* I2S_Mode */ +#define I2S_Mode_SlaveTx ((uint16_t)0x0000) +#define I2S_Mode_SlaveRx ((uint16_t)0x0100) +#define I2S_Mode_MasterTx ((uint16_t)0x0200) +#define I2S_Mode_MasterRx ((uint16_t)0x0300) + +/* I2S_Standard */ +#define I2S_Standard_Phillips ((uint16_t)0x0000) +#define I2S_Standard_MSB ((uint16_t)0x0010) +#define I2S_Standard_LSB ((uint16_t)0x0020) +#define I2S_Standard_PCMShort ((uint16_t)0x0030) +#define I2S_Standard_PCMLong ((uint16_t)0x00B0) + +/* I2S_Data_Format */ +#define I2S_DataFormat_16b ((uint16_t)0x0000) +#define I2S_DataFormat_16bextended ((uint16_t)0x0001) +#define I2S_DataFormat_24b ((uint16_t)0x0003) +#define I2S_DataFormat_32b ((uint16_t)0x0005) + +/* I2S_MCLK_Output */ +#define I2S_MCLKOutput_Enable ((uint16_t)0x0200) +#define I2S_MCLKOutput_Disable ((uint16_t)0x0000) + +/* I2S_Audio_Frequency */ +#define I2S_AudioFreq_192k ((uint32_t)192000) +#define I2S_AudioFreq_96k ((uint32_t)96000) +#define I2S_AudioFreq_48k ((uint32_t)48000) +#define I2S_AudioFreq_44k ((uint32_t)44100) +#define I2S_AudioFreq_32k ((uint32_t)32000) +#define I2S_AudioFreq_22k ((uint32_t)22050) +#define I2S_AudioFreq_16k ((uint32_t)16000) +#define I2S_AudioFreq_11k ((uint32_t)11025) +#define I2S_AudioFreq_8k ((uint32_t)8000) +#define I2S_AudioFreq_Default ((uint32_t)2) + +/* I2S_Clock_Polarity */ +#define I2S_CPOL_Low ((uint16_t)0x0000) +#define I2S_CPOL_High ((uint16_t)0x0008) + +/* SPI_I2S_DMA_transfer_requests */ +#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002) +#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001) + +/* SPI_NSS_internal_software_management */ +#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100) +#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) + +/* SPI_CRC_Transmit_Receive */ +#define SPI_CRC_Tx ((uint8_t)0x00) +#define SPI_CRC_Rx ((uint8_t)0x01) + +/* SPI_direction_transmit_receive */ +#define SPI_Direction_Rx ((uint16_t)0xBFFF) +#define SPI_Direction_Tx ((uint16_t)0x4000) + +/* SPI_I2S_interrupts_definition */ +#define SPI_I2S_IT_TXE ((uint8_t)0x71) +#define SPI_I2S_IT_RXNE ((uint8_t)0x60) +#define SPI_I2S_IT_ERR ((uint8_t)0x50) +#define SPI_I2S_IT_OVR ((uint8_t)0x56) +#define SPI_IT_MODF ((uint8_t)0x55) +#define SPI_IT_CRCERR ((uint8_t)0x54) +#define I2S_IT_UDR ((uint8_t)0x53) + +/* SPI_I2S_flags_definition */ +#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001) +#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002) +#define I2S_FLAG_CHSIDE ((uint16_t)0x0004) +#define I2S_FLAG_UDR ((uint16_t)0x0008) +#define SPI_FLAG_CRCERR ((uint16_t)0x0010) +#define SPI_FLAG_MODF ((uint16_t)0x0020) +#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040) +#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080) + +void SPI_I2S_DeInit(SPI_TypeDef *SPIx); +void SPI_Init(SPI_TypeDef *SPIx, SPI_InitTypeDef *SPI_InitStruct); +void I2S_Init(SPI_TypeDef *SPIx, I2S_InitTypeDef *I2S_InitStruct); +void SPI_StructInit(SPI_InitTypeDef *SPI_InitStruct); +void I2S_StructInit(I2S_InitTypeDef *I2S_InitStruct); +void SPI_Cmd(SPI_TypeDef *SPIx, FunctionalState NewState); +void I2S_Cmd(SPI_TypeDef *SPIx, FunctionalState NewState); +void SPI_I2S_ITConfig(SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); +void SPI_I2S_DMACmd(SPI_TypeDef *SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); +void SPI_I2S_SendData(SPI_TypeDef *SPIx, uint16_t Data); +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef *SPIx); +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef *SPIx, uint16_t SPI_NSSInternalSoft); +void SPI_SSOutputCmd(SPI_TypeDef *SPIx, FunctionalState NewState); +void SPI_DataSizeConfig(SPI_TypeDef *SPIx, uint16_t SPI_DataSize); +void SPI_TransmitCRC(SPI_TypeDef *SPIx); +void SPI_CalculateCRC(SPI_TypeDef *SPIx, FunctionalState NewState); +uint16_t SPI_GetCRC(SPI_TypeDef *SPIx, uint8_t SPI_CRC); +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef *SPIx); +void SPI_BiDirectionalLineConfig(SPI_TypeDef *SPIx, uint16_t SPI_Direction); +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef *SPIx, uint16_t SPI_I2S_FLAG); +void SPI_I2S_ClearFlag(SPI_TypeDef *SPIx, uint16_t SPI_I2S_FLAG); +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT); +void SPI_I2S_ClearITPendingBit(SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_tim.h b/gat_stand_fw/periph/inc/ch32v20x_tim.h new file mode 100644 index 0000000..33ddcd8 --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_tim.h @@ -0,0 +1,508 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_tim.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the + * TIM firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_TIM_H +#define __CH32V20x_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* TIM Time Base Init structure definition */ +typedef struct +{ + uint16_t TIM_Prescaler; /* Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between 0x0000 and 0xFFFF */ + + uint16_t TIM_CounterMode; /* Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint16_t TIM_Period; /* Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between 0x0000 and 0xFFFF. */ + + uint16_t TIM_ClockDivision; /* Specifies the clock division. + This parameter can be a value of @ref TIM_Clock_Division_CKD */ + + uint8_t TIM_RepetitionCounter; /* Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + This parameter must be a number between 0x00 and 0xFF. + @note This parameter is valid only for TIM1 and TIM8. */ +} TIM_TimeBaseInitTypeDef; + +/* TIM Output Compare Init structure definition */ +typedef struct +{ + uint16_t TIM_OCMode; /* Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint16_t TIM_OutputState; /* Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_Output_Compare_state */ + + uint16_t TIM_OutputNState; /* Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_Output_Compare_N_state + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_Pulse; /* Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between 0x0000 and 0xFFFF */ + + uint16_t TIM_OCPolarity; /* Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint16_t TIM_OCNPolarity; /* Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_OCIdleState; /* Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_OCNIdleState; /* Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ +} TIM_OCInitTypeDef; + +/* TIM Input Capture Init structure definition */ +typedef struct +{ + uint16_t TIM_Channel; /* Specifies the TIM channel. + This parameter can be a value of @ref TIM_Channel */ + + uint16_t TIM_ICPolarity; /* Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint16_t TIM_ICSelection; /* Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint16_t TIM_ICPrescaler; /* Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint16_t TIM_ICFilter; /* Specifies the input capture filter. + This parameter can be a number between 0x0 and 0xF */ +} TIM_ICInitTypeDef; + +/* BDTR structure definition */ +typedef struct +{ + uint16_t TIM_OSSRState; /* Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref OSSR_Off_State_Selection_for_Run_mode_state */ + + uint16_t TIM_OSSIState; /* Specifies the Off-State used in Idle state. + This parameter can be a value of @ref OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint16_t TIM_LOCKLevel; /* Specifies the LOCK level parameters. + This parameter can be a value of @ref Lock_level */ + + uint16_t TIM_DeadTime; /* Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between 0x00 and 0xFF */ + + uint16_t TIM_Break; /* Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref Break_Input_enable_disable */ + + uint16_t TIM_BreakPolarity; /* Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref Break_Polarity */ + + uint16_t TIM_AutomaticOutput; /* Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ +} TIM_BDTRInitTypeDef; + +/* TIM_Output_Compare_and_PWM_modes */ +#define TIM_OCMode_Timing ((uint16_t)0x0000) +#define TIM_OCMode_Active ((uint16_t)0x0010) +#define TIM_OCMode_Inactive ((uint16_t)0x0020) +#define TIM_OCMode_Toggle ((uint16_t)0x0030) +#define TIM_OCMode_PWM1 ((uint16_t)0x0060) +#define TIM_OCMode_PWM2 ((uint16_t)0x0070) + +/* TIM_One_Pulse_Mode */ +#define TIM_OPMode_Single ((uint16_t)0x0008) +#define TIM_OPMode_Repetitive ((uint16_t)0x0000) + +/* TIM_Channel */ +#define TIM_Channel_1 ((uint16_t)0x0000) +#define TIM_Channel_2 ((uint16_t)0x0004) +#define TIM_Channel_3 ((uint16_t)0x0008) +#define TIM_Channel_4 ((uint16_t)0x000C) + +/* TIM_Clock_Division_CKD */ +#define TIM_CKD_DIV1 ((uint16_t)0x0000) +#define TIM_CKD_DIV2 ((uint16_t)0x0100) +#define TIM_CKD_DIV4 ((uint16_t)0x0200) + +/* TIM_Counter_Mode */ +#define TIM_CounterMode_Up ((uint16_t)0x0000) +#define TIM_CounterMode_Down ((uint16_t)0x0010) +#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020) +#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040) +#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060) + +/* TIM_Output_Compare_Polarity */ +#define TIM_OCPolarity_High ((uint16_t)0x0000) +#define TIM_OCPolarity_Low ((uint16_t)0x0002) + +/* TIM_Output_Compare_N_Polarity */ +#define TIM_OCNPolarity_High ((uint16_t)0x0000) +#define TIM_OCNPolarity_Low ((uint16_t)0x0008) + +/* TIM_Output_Compare_state */ +#define TIM_OutputState_Disable ((uint16_t)0x0000) +#define TIM_OutputState_Enable ((uint16_t)0x0001) + +/* TIM_Output_Compare_N_state */ +#define TIM_OutputNState_Disable ((uint16_t)0x0000) +#define TIM_OutputNState_Enable ((uint16_t)0x0004) + +/* TIM_Capture_Compare_state */ +#define TIM_CCx_Enable ((uint16_t)0x0001) +#define TIM_CCx_Disable ((uint16_t)0x0000) + +/* TIM_Capture_Compare_N_state */ +#define TIM_CCxN_Enable ((uint16_t)0x0004) +#define TIM_CCxN_Disable ((uint16_t)0x0000) + +/* Break_Input_enable_disable */ +#define TIM_Break_Enable ((uint16_t)0x1000) +#define TIM_Break_Disable ((uint16_t)0x0000) + +/* Break_Polarity */ +#define TIM_BreakPolarity_Low ((uint16_t)0x0000) +#define TIM_BreakPolarity_High ((uint16_t)0x2000) + +/* TIM_AOE_Bit_Set_Reset */ +#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000) +#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000) + +/* Lock_level */ +#define TIM_LOCKLevel_OFF ((uint16_t)0x0000) +#define TIM_LOCKLevel_1 ((uint16_t)0x0100) +#define TIM_LOCKLevel_2 ((uint16_t)0x0200) +#define TIM_LOCKLevel_3 ((uint16_t)0x0300) + +/* OSSI_Off_State_Selection_for_Idle_mode_state */ +#define TIM_OSSIState_Enable ((uint16_t)0x0400) +#define TIM_OSSIState_Disable ((uint16_t)0x0000) + +/* OSSR_Off_State_Selection_for_Run_mode_state */ +#define TIM_OSSRState_Enable ((uint16_t)0x0800) +#define TIM_OSSRState_Disable ((uint16_t)0x0000) + +/* TIM_Output_Compare_Idle_State */ +#define TIM_OCIdleState_Set ((uint16_t)0x0100) +#define TIM_OCIdleState_Reset ((uint16_t)0x0000) + +/* TIM_Output_Compare_N_Idle_State */ +#define TIM_OCNIdleState_Set ((uint16_t)0x0200) +#define TIM_OCNIdleState_Reset ((uint16_t)0x0000) + +/* TIM_Input_Capture_Polarity */ +#define TIM_ICPolarity_Rising ((uint16_t)0x0000) +#define TIM_ICPolarity_Falling ((uint16_t)0x0002) +#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A) + +/* TIM_Input_Capture_Selection */ +#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /* TIM Input 1, 2, 3 or 4 is selected to be \ + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /* TIM Input 1, 2, 3 or 4 is selected to be \ + connected to IC2, IC1, IC4 or IC3, respectively. */ +#define TIM_ICSelection_TRC ((uint16_t)0x0003) /* TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */ + +/* TIM_Input_Capture_Prescaler */ +#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /* Capture performed each time an edge is detected on the capture input. */ +#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /* Capture performed once every 2 events. */ +#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /* Capture performed once every 4 events. */ +#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /* Capture performed once every 8 events. */ + +/* TIM_interrupt_sources */ +#define TIM_IT_Update ((uint16_t)0x0001) +#define TIM_IT_CC1 ((uint16_t)0x0002) +#define TIM_IT_CC2 ((uint16_t)0x0004) +#define TIM_IT_CC3 ((uint16_t)0x0008) +#define TIM_IT_CC4 ((uint16_t)0x0010) +#define TIM_IT_COM ((uint16_t)0x0020) +#define TIM_IT_Trigger ((uint16_t)0x0040) +#define TIM_IT_Break ((uint16_t)0x0080) + +/* TIM_DMA_Base_address */ +#define TIM_DMABase_CR1 ((uint16_t)0x0000) +#define TIM_DMABase_CR2 ((uint16_t)0x0001) +#define TIM_DMABase_SMCR ((uint16_t)0x0002) +#define TIM_DMABase_DIER ((uint16_t)0x0003) +#define TIM_DMABase_SR ((uint16_t)0x0004) +#define TIM_DMABase_EGR ((uint16_t)0x0005) +#define TIM_DMABase_CCMR1 ((uint16_t)0x0006) +#define TIM_DMABase_CCMR2 ((uint16_t)0x0007) +#define TIM_DMABase_CCER ((uint16_t)0x0008) +#define TIM_DMABase_CNT ((uint16_t)0x0009) +#define TIM_DMABase_PSC ((uint16_t)0x000A) +#define TIM_DMABase_ARR ((uint16_t)0x000B) +#define TIM_DMABase_RCR ((uint16_t)0x000C) +#define TIM_DMABase_CCR1 ((uint16_t)0x000D) +#define TIM_DMABase_CCR2 ((uint16_t)0x000E) +#define TIM_DMABase_CCR3 ((uint16_t)0x000F) +#define TIM_DMABase_CCR4 ((uint16_t)0x0010) +#define TIM_DMABase_BDTR ((uint16_t)0x0011) +#define TIM_DMABase_DCR ((uint16_t)0x0012) + +/* TIM_DMA_Burst_Length */ +#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000) +#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100) +#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200) +#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300) +#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400) +#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500) +#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600) +#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700) +#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800) +#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900) +#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00) +#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00) +#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00) +#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00) +#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00) +#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00) +#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000) +#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100) + +/* TIM_DMA_sources */ +#define TIM_DMA_Update ((uint16_t)0x0100) +#define TIM_DMA_CC1 ((uint16_t)0x0200) +#define TIM_DMA_CC2 ((uint16_t)0x0400) +#define TIM_DMA_CC3 ((uint16_t)0x0800) +#define TIM_DMA_CC4 ((uint16_t)0x1000) +#define TIM_DMA_COM ((uint16_t)0x2000) +#define TIM_DMA_Trigger ((uint16_t)0x4000) + +/* TIM_External_Trigger_Prescaler */ +#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000) +#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000) +#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000) +#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000) + +/* TIM_Internal_Trigger_Selection */ +#define TIM_TS_ITR0 ((uint16_t)0x0000) +#define TIM_TS_ITR1 ((uint16_t)0x0010) +#define TIM_TS_ITR2 ((uint16_t)0x0020) +#define TIM_TS_ITR3 ((uint16_t)0x0030) +#define TIM_TS_TI1F_ED ((uint16_t)0x0040) +#define TIM_TS_TI1FP1 ((uint16_t)0x0050) +#define TIM_TS_TI2FP2 ((uint16_t)0x0060) +#define TIM_TS_ETRF ((uint16_t)0x0070) + +/* TIM_TIx_External_Clock_Source */ +#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050) +#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060) +#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040) + +/* TIM_External_Trigger_Polarity */ +#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000) +#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000) + +/* TIM_Prescaler_Reload_Mode */ +#define TIM_PSCReloadMode_Update ((uint16_t)0x0000) +#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001) + +/* TIM_Forced_Action */ +#define TIM_ForcedAction_Active ((uint16_t)0x0050) +#define TIM_ForcedAction_InActive ((uint16_t)0x0040) + +/* TIM_Encoder_Mode */ +#define TIM_EncoderMode_TI1 ((uint16_t)0x0001) +#define TIM_EncoderMode_TI2 ((uint16_t)0x0002) +#define TIM_EncoderMode_TI12 ((uint16_t)0x0003) + +/* TIM_Event_Source */ +#define TIM_EventSource_Update ((uint16_t)0x0001) +#define TIM_EventSource_CC1 ((uint16_t)0x0002) +#define TIM_EventSource_CC2 ((uint16_t)0x0004) +#define TIM_EventSource_CC3 ((uint16_t)0x0008) +#define TIM_EventSource_CC4 ((uint16_t)0x0010) +#define TIM_EventSource_COM ((uint16_t)0x0020) +#define TIM_EventSource_Trigger ((uint16_t)0x0040) +#define TIM_EventSource_Break ((uint16_t)0x0080) + +/* TIM_Update_Source */ +#define TIM_UpdateSource_Global ((uint16_t)0x0000) /* Source of update is the counter overflow/underflow \ + or the setting of UG bit, or an update generation \ + through the slave mode controller. */ +#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /* Source of update is counter overflow/underflow. */ + +/* TIM_Output_Compare_Preload_State */ +#define TIM_OCPreload_Enable ((uint16_t)0x0008) +#define TIM_OCPreload_Disable ((uint16_t)0x0000) + +/* TIM_Output_Compare_Fast_State */ +#define TIM_OCFast_Enable ((uint16_t)0x0004) +#define TIM_OCFast_Disable ((uint16_t)0x0000) + +/* TIM_Output_Compare_Clear_State */ +#define TIM_OCClear_Enable ((uint16_t)0x0080) +#define TIM_OCClear_Disable ((uint16_t)0x0000) + +/* TIM_Trigger_Output_Source */ +#define TIM_TRGOSource_Reset ((uint16_t)0x0000) +#define TIM_TRGOSource_Enable ((uint16_t)0x0010) +#define TIM_TRGOSource_Update ((uint16_t)0x0020) +#define TIM_TRGOSource_OC1 ((uint16_t)0x0030) +#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040) +#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050) +#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060) +#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070) + +/* TIM_Slave_Mode */ +#define TIM_SlaveMode_Reset ((uint16_t)0x0004) +#define TIM_SlaveMode_Gated ((uint16_t)0x0005) +#define TIM_SlaveMode_Trigger ((uint16_t)0x0006) +#define TIM_SlaveMode_External1 ((uint16_t)0x0007) + +/* TIM_Master_Slave_Mode */ +#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080) +#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000) + +/* TIM_Flags */ +#define TIM_FLAG_Update ((uint16_t)0x0001) +#define TIM_FLAG_CC1 ((uint16_t)0x0002) +#define TIM_FLAG_CC2 ((uint16_t)0x0004) +#define TIM_FLAG_CC3 ((uint16_t)0x0008) +#define TIM_FLAG_CC4 ((uint16_t)0x0010) +#define TIM_FLAG_COM ((uint16_t)0x0020) +#define TIM_FLAG_Trigger ((uint16_t)0x0040) +#define TIM_FLAG_Break ((uint16_t)0x0080) +#define TIM_FLAG_CC1OF ((uint16_t)0x0200) +#define TIM_FLAG_CC2OF ((uint16_t)0x0400) +#define TIM_FLAG_CC3OF ((uint16_t)0x0800) +#define TIM_FLAG_CC4OF ((uint16_t)0x1000) + +/* TIM_Legacy */ +#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer +#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers +#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers +#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers +#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers +#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers +#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers +#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers +#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers +#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers +#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers +#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers +#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers +#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers +#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers +#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers +#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers +#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers + +void TIM_DeInit(TIM_TypeDef *TIMx); +void TIM_TimeBaseInit(TIM_TypeDef *TIMx, TIM_TimeBaseInitTypeDef *TIM_TimeBaseInitStruct); +void TIM_OC1Init(TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct); +void TIM_OC2Init(TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct); +void TIM_OC3Init(TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct); +void TIM_OC4Init(TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct); +void TIM_ICInit(TIM_TypeDef *TIMx, TIM_ICInitTypeDef *TIM_ICInitStruct); +void TIM_PWMIConfig(TIM_TypeDef *TIMx, TIM_ICInitTypeDef *TIM_ICInitStruct); +void TIM_BDTRConfig(TIM_TypeDef *TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct); +void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef *TIM_TimeBaseInitStruct); +void TIM_OCStructInit(TIM_OCInitTypeDef *TIM_OCInitStruct); +void TIM_ICStructInit(TIM_ICInitTypeDef *TIM_ICInitStruct); +void TIM_BDTRStructInit(TIM_BDTRInitTypeDef *TIM_BDTRInitStruct); +void TIM_Cmd(TIM_TypeDef *TIMx, FunctionalState NewState); +void TIM_CtrlPWMOutputs(TIM_TypeDef *TIMx, FunctionalState NewState); +void TIM_ITConfig(TIM_TypeDef *TIMx, uint16_t TIM_IT, FunctionalState NewState); +void TIM_GenerateEvent(TIM_TypeDef *TIMx, uint16_t TIM_EventSource); +void TIM_DMAConfig(TIM_TypeDef *TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength); +void TIM_DMACmd(TIM_TypeDef *TIMx, uint16_t TIM_DMASource, FunctionalState NewState); +void TIM_InternalClockConfig(TIM_TypeDef *TIMx); +void TIM_ITRxExternalClockConfig(TIM_TypeDef *TIMx, uint16_t TIM_InputTriggerSource); +void TIM_TIxExternalClockConfig(TIM_TypeDef *TIMx, uint16_t TIM_TIxExternalCLKSource, + uint16_t TIM_ICPolarity, uint16_t ICFilter); +void TIM_ETRClockMode1Config(TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); +void TIM_ETRClockMode2Config(TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter); +void TIM_ETRConfig(TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); +void TIM_PrescalerConfig(TIM_TypeDef *TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode); +void TIM_CounterModeConfig(TIM_TypeDef *TIMx, uint16_t TIM_CounterMode); +void TIM_SelectInputTrigger(TIM_TypeDef *TIMx, uint16_t TIM_InputTriggerSource); +void TIM_EncoderInterfaceConfig(TIM_TypeDef *TIMx, uint16_t TIM_EncoderMode, + uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity); +void TIM_ForcedOC1Config(TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC2Config(TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC3Config(TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC4Config(TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction); +void TIM_ARRPreloadConfig(TIM_TypeDef *TIMx, FunctionalState NewState); +void TIM_SelectCOM(TIM_TypeDef *TIMx, FunctionalState NewState); +void TIM_SelectCCDMA(TIM_TypeDef *TIMx, FunctionalState NewState); +void TIM_CCPreloadControl(TIM_TypeDef *TIMx, FunctionalState NewState); +void TIM_OC1PreloadConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPreload); +void TIM_OC2PreloadConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPreload); +void TIM_OC3PreloadConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPreload); +void TIM_OC4PreloadConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPreload); +void TIM_OC1FastConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCFast); +void TIM_OC2FastConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCFast); +void TIM_OC3FastConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCFast); +void TIM_OC4FastConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCFast); +void TIM_ClearOC1Ref(TIM_TypeDef *TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC2Ref(TIM_TypeDef *TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC3Ref(TIM_TypeDef *TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC4Ref(TIM_TypeDef *TIMx, uint16_t TIM_OCClear); +void TIM_OC1PolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity); +void TIM_OC1NPolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC2PolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity); +void TIM_OC2NPolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC3PolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity); +void TIM_OC3NPolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC4PolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity); +void TIM_CCxCmd(TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx); +void TIM_CCxNCmd(TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN); +void TIM_SelectOCxM(TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode); +void TIM_UpdateDisableConfig(TIM_TypeDef *TIMx, FunctionalState NewState); +void TIM_UpdateRequestConfig(TIM_TypeDef *TIMx, uint16_t TIM_UpdateSource); +void TIM_SelectHallSensor(TIM_TypeDef *TIMx, FunctionalState NewState); +void TIM_SelectOnePulseMode(TIM_TypeDef *TIMx, uint16_t TIM_OPMode); +void TIM_SelectOutputTrigger(TIM_TypeDef *TIMx, uint16_t TIM_TRGOSource); +void TIM_SelectSlaveMode(TIM_TypeDef *TIMx, uint16_t TIM_SlaveMode); +void TIM_SelectMasterSlaveMode(TIM_TypeDef *TIMx, uint16_t TIM_MasterSlaveMode); +void TIM_SetCounter(TIM_TypeDef *TIMx, uint16_t Counter); +void TIM_SetAutoreload(TIM_TypeDef *TIMx, uint16_t Autoreload); +void TIM_SetCompare1(TIM_TypeDef *TIMx, uint16_t Compare1); +void TIM_SetCompare2(TIM_TypeDef *TIMx, uint16_t Compare2); +void TIM_SetCompare3(TIM_TypeDef *TIMx, uint16_t Compare3); +void TIM_SetCompare4(TIM_TypeDef *TIMx, uint16_t Compare4); +void TIM_SetIC1Prescaler(TIM_TypeDef *TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC2Prescaler(TIM_TypeDef *TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC3Prescaler(TIM_TypeDef *TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC4Prescaler(TIM_TypeDef *TIMx, uint16_t TIM_ICPSC); +void TIM_SetClockDivision(TIM_TypeDef *TIMx, uint16_t TIM_CKD); +uint16_t TIM_GetCapture1(TIM_TypeDef *TIMx); +uint16_t TIM_GetCapture2(TIM_TypeDef *TIMx); +uint16_t TIM_GetCapture3(TIM_TypeDef *TIMx); +uint16_t TIM_GetCapture4(TIM_TypeDef *TIMx); +uint16_t TIM_GetCounter(TIM_TypeDef *TIMx); +uint16_t TIM_GetPrescaler(TIM_TypeDef *TIMx); +FlagStatus TIM_GetFlagStatus(TIM_TypeDef *TIMx, uint16_t TIM_FLAG); +void TIM_ClearFlag(TIM_TypeDef *TIMx, uint16_t TIM_FLAG); +ITStatus TIM_GetITStatus(TIM_TypeDef *TIMx, uint16_t TIM_IT); +void TIM_ClearITPendingBit(TIM_TypeDef *TIMx, uint16_t TIM_IT); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_usart.h b/gat_stand_fw/periph/inc/ch32v20x_usart.h new file mode 100644 index 0000000..0bb4b24 --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_usart.h @@ -0,0 +1,185 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_usart.h + * Author : WCH + * Version : V1.0.0 + * Date : 2024/01/06 + * Description : This file contains all the functions prototypes for the + * USART firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_USART_H +#define __CH32V20x_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* USART Init Structure definition */ +typedef struct +{ + uint32_t USART_BaudRate; /* This member configures the USART communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate))) + - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */ + + uint16_t USART_WordLength; /* Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_Word_Length */ + + uint16_t USART_StopBits; /* Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits */ + + uint16_t USART_Parity; /* Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint16_t USART_Mode; /* Specifies wether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode */ + + uint16_t USART_HardwareFlowControl; /* Specifies wether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref USART_Hardware_Flow_Control */ +} USART_InitTypeDef; + +/* USART Clock Init Structure definition */ +typedef struct +{ + uint16_t USART_Clock; /* Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_Clock */ + + uint16_t USART_CPOL; /* Specifies the steady state value of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity */ + + uint16_t USART_CPHA; /* Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase */ + + uint16_t USART_LastBit; /* Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit */ +} USART_ClockInitTypeDef; + +/* USART_Word_Length */ +#define USART_WordLength_8b ((uint16_t)0x0000) +#define USART_WordLength_9b ((uint16_t)0x1000) + +/* USART_Stop_Bits */ +#define USART_StopBits_1 ((uint16_t)0x0000) +#define USART_StopBits_0_5 ((uint16_t)0x1000) +#define USART_StopBits_2 ((uint16_t)0x2000) +#define USART_StopBits_1_5 ((uint16_t)0x3000) + +/* USART_Parity */ +#define USART_Parity_No ((uint16_t)0x0000) +#define USART_Parity_Even ((uint16_t)0x0400) +#define USART_Parity_Odd ((uint16_t)0x0600) + +/* USART_Mode */ +#define USART_Mode_Rx ((uint16_t)0x0004) +#define USART_Mode_Tx ((uint16_t)0x0008) + +/* USART_Hardware_Flow_Control */ +#define USART_HardwareFlowControl_None ((uint16_t)0x0000) +#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100) +#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200) +#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300) + +/* USART_Clock */ +#define USART_Clock_Disable ((uint16_t)0x0000) +#define USART_Clock_Enable ((uint16_t)0x0800) + +/* USART_Clock_Polarity */ +#define USART_CPOL_Low ((uint16_t)0x0000) +#define USART_CPOL_High ((uint16_t)0x0400) + +/* USART_Clock_Phase */ +#define USART_CPHA_1Edge ((uint16_t)0x0000) +#define USART_CPHA_2Edge ((uint16_t)0x0200) + +/* USART_Last_Bit */ +#define USART_LastBit_Disable ((uint16_t)0x0000) +#define USART_LastBit_Enable ((uint16_t)0x0100) + +/* USART_Interrupt_definition */ +#define USART_IT_PE ((uint16_t)0x0028) +#define USART_IT_TXE ((uint16_t)0x0727) +#define USART_IT_TC ((uint16_t)0x0626) +#define USART_IT_RXNE ((uint16_t)0x0525) +#define USART_IT_ORE_RX ((uint16_t)0x0325) +#define USART_IT_IDLE ((uint16_t)0x0424) +#define USART_IT_LBD ((uint16_t)0x0846) +#define USART_IT_CTS ((uint16_t)0x096A) +#define USART_IT_ERR ((uint16_t)0x0060) +#define USART_IT_ORE_ER ((uint16_t)0x0360) +#define USART_IT_NE ((uint16_t)0x0260) +#define USART_IT_FE ((uint16_t)0x0160) + +#define USART_IT_ORE USART_IT_ORE_ER + +/* USART_DMA_Requests */ +#define USART_DMAReq_Tx ((uint16_t)0x0080) +#define USART_DMAReq_Rx ((uint16_t)0x0040) + +/* USART_WakeUp_methods */ +#define USART_WakeUp_IdleLine ((uint16_t)0x0000) +#define USART_WakeUp_AddressMark ((uint16_t)0x0800) + +/* USART_LIN_Break_Detection_Length */ +#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000) +#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020) + +/* USART_IrDA_Low_Power */ +#define USART_IrDAMode_LowPower ((uint16_t)0x0004) +#define USART_IrDAMode_Normal ((uint16_t)0x0000) + +/* USART_Flags */ +#define USART_FLAG_CTS ((uint16_t)0x0200) +#define USART_FLAG_LBD ((uint16_t)0x0100) +#define USART_FLAG_TXE ((uint16_t)0x0080) +#define USART_FLAG_TC ((uint16_t)0x0040) +#define USART_FLAG_RXNE ((uint16_t)0x0020) +#define USART_FLAG_IDLE ((uint16_t)0x0010) +#define USART_FLAG_ORE ((uint16_t)0x0008) +#define USART_FLAG_NE ((uint16_t)0x0004) +#define USART_FLAG_FE ((uint16_t)0x0002) +#define USART_FLAG_PE ((uint16_t)0x0001) + +void USART_DeInit(USART_TypeDef *USARTx); +void USART_Init(USART_TypeDef *USARTx, USART_InitTypeDef *USART_InitStruct); +void USART_StructInit(USART_InitTypeDef *USART_InitStruct); +void USART_ClockInit(USART_TypeDef *USARTx, USART_ClockInitTypeDef *USART_ClockInitStruct); +void USART_ClockStructInit(USART_ClockInitTypeDef *USART_ClockInitStruct); +void USART_Cmd(USART_TypeDef *USARTx, FunctionalState NewState); +void USART_ITConfig(USART_TypeDef *USARTx, uint16_t USART_IT, FunctionalState NewState); +void USART_DMACmd(USART_TypeDef *USARTx, uint16_t USART_DMAReq, FunctionalState NewState); +void USART_SetAddress(USART_TypeDef *USARTx, uint8_t USART_Address); +void USART_WakeUpConfig(USART_TypeDef *USARTx, uint16_t USART_WakeUp); +void USART_ReceiverWakeUpCmd(USART_TypeDef *USARTx, FunctionalState NewState); +void USART_LINBreakDetectLengthConfig(USART_TypeDef *USARTx, uint16_t USART_LINBreakDetectLength); +void USART_LINCmd(USART_TypeDef *USARTx, FunctionalState NewState); +void USART_SendData(USART_TypeDef *USARTx, uint16_t Data); +uint16_t USART_ReceiveData(USART_TypeDef *USARTx); +void USART_SendBreak(USART_TypeDef *USARTx); +void USART_SetGuardTime(USART_TypeDef *USARTx, uint8_t USART_GuardTime); +void USART_SetPrescaler(USART_TypeDef *USARTx, uint8_t USART_Prescaler); +void USART_SmartCardCmd(USART_TypeDef *USARTx, FunctionalState NewState); +void USART_SmartCardNACKCmd(USART_TypeDef *USARTx, FunctionalState NewState); +void USART_HalfDuplexCmd(USART_TypeDef *USARTx, FunctionalState NewState); +void USART_IrDAConfig(USART_TypeDef *USARTx, uint16_t USART_IrDAMode); +void USART_IrDACmd(USART_TypeDef *USARTx, FunctionalState NewState); +FlagStatus USART_GetFlagStatus(USART_TypeDef *USARTx, uint16_t USART_FLAG); +void USART_ClearFlag(USART_TypeDef *USARTx, uint16_t USART_FLAG); +ITStatus USART_GetITStatus(USART_TypeDef *USARTx, uint16_t USART_IT); +void USART_ClearITPendingBit(USART_TypeDef *USARTx, uint16_t USART_IT); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/inc/ch32v20x_usb.h b/gat_stand_fw/periph/inc/ch32v20x_usb.h new file mode 100644 index 0000000..1a7c9ce --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_usb.h @@ -0,0 +1,532 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_usb.h + * Author : WCH + * Version : V1.0.0 + * Date : 2024/01/30 + * Description : This file contains all the functions prototypes for the USB + * firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20X_USB_H +#define __CH32V20X_USB_H + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus + extern "C" { +#endif + +/*******************************************************************************/ +/* Header File */ +#include "stdint.h" + +/*******************************************************************************/ +/* USB Communication Related Macro Definition */ +#ifndef DEFAULT_ENDP0_SIZE +#define DEFAULT_ENDP0_SIZE 8 // default maximum packet size for endpoint 0 +#endif +#ifndef MAX_PACKET_SIZE +#define MAX_PACKET_SIZE 64 // maximum packet size +#endif + +/* USB PID */ +#ifndef USB_PID_SETUP +#define USB_PID_NULL 0x00 +#define USB_PID_SOF 0x05 +#define USB_PID_SETUP 0x0D +#define USB_PID_IN 0x09 +#define USB_PID_OUT 0x01 +#define USB_PID_NYET 0x06 +#define USB_PID_ACK 0x02 +#define USB_PID_NAK 0x0A +#define USB_PID_STALL 0x0E +#define USB_PID_DATA0 0x03 +#define USB_PID_DATA1 0x0B +#define USB_PID_PRE 0x0C +#endif + +/* USB standard device request code */ +#ifndef USB_GET_DESCRIPTOR +#define USB_GET_STATUS 0x00 +#define USB_CLEAR_FEATURE 0x01 +#define USB_SET_FEATURE 0x03 +#define USB_SET_ADDRESS 0x05 +#define USB_GET_DESCRIPTOR 0x06 +#define USB_SET_DESCRIPTOR 0x07 +#define USB_GET_CONFIGURATION 0x08 +#define USB_SET_CONFIGURATION 0x09 +#define USB_GET_INTERFACE 0x0A +#define USB_SET_INTERFACE 0x0B +#define USB_SYNCH_FRAME 0x0C +#endif + +#define DEF_STRING_DESC_LANG 0x00 +#define DEF_STRING_DESC_MANU 0x01 +#define DEF_STRING_DESC_PROD 0x02 +#define DEF_STRING_DESC_SERN 0x03 + +/* USB hub class request code */ +#ifndef HUB_GET_DESCRIPTOR +#define HUB_GET_STATUS 0x00 +#define HUB_CLEAR_FEATURE 0x01 +#define HUB_GET_STATE 0x02 +#define HUB_SET_FEATURE 0x03 +#define HUB_GET_DESCRIPTOR 0x06 +#define HUB_SET_DESCRIPTOR 0x07 +#endif + +/* USB HID class request code */ +#ifndef HID_GET_REPORT +#define HID_GET_REPORT 0x01 +#define HID_GET_IDLE 0x02 +#define HID_GET_PROTOCOL 0x03 +#define HID_SET_REPORT 0x09 +#define HID_SET_IDLE 0x0A +#define HID_SET_PROTOCOL 0x0B +#endif + +/* Bit Define for USB Request Type */ +#ifndef USB_REQ_TYP_MASK +#define USB_REQ_TYP_IN 0x80 +#define USB_REQ_TYP_OUT 0x00 +#define USB_REQ_TYP_READ 0x80 +#define USB_REQ_TYP_WRITE 0x00 +#define USB_REQ_TYP_MASK 0x60 +#define USB_REQ_TYP_STANDARD 0x00 +#define USB_REQ_TYP_CLASS 0x20 +#define USB_REQ_TYP_VENDOR 0x40 +#define USB_REQ_TYP_RESERVED 0x60 +#define USB_REQ_RECIP_MASK 0x1F +#define USB_REQ_RECIP_DEVICE 0x00 +#define USB_REQ_RECIP_INTERF 0x01 +#define USB_REQ_RECIP_ENDP 0x02 +#define USB_REQ_RECIP_OTHER 0x03 +#define USB_REQ_FEAT_REMOTE_WAKEUP 0x01 +#define USB_REQ_FEAT_ENDP_HALT 0x00 +#endif + +/* USB Descriptor Type */ +#ifndef USB_DESCR_TYP_DEVICE +#define USB_DESCR_TYP_DEVICE 0x01 +#define USB_DESCR_TYP_CONFIG 0x02 +#define USB_DESCR_TYP_STRING 0x03 +#define USB_DESCR_TYP_INTERF 0x04 +#define USB_DESCR_TYP_ENDP 0x05 +#define USB_DESCR_TYP_QUALIF 0x06 +#define USB_DESCR_TYP_SPEED 0x07 +#define USB_DESCR_TYP_OTG 0x09 +#define USB_DESCR_TYP_BOS 0X0F +#define USB_DESCR_TYP_HID 0x21 +#define USB_DESCR_TYP_REPORT 0x22 +#define USB_DESCR_TYP_PHYSIC 0x23 +#define USB_DESCR_TYP_CS_INTF 0x24 +#define USB_DESCR_TYP_CS_ENDP 0x25 +#define USB_DESCR_TYP_HUB 0x29 +#endif + +/* USB Device Class */ +#ifndef USB_DEV_CLASS_HUB +#define USB_DEV_CLASS_RESERVED 0x00 +#define USB_DEV_CLASS_AUDIO 0x01 +#define USB_DEV_CLASS_COMMUNIC 0x02 +#define USB_DEV_CLASS_HID 0x03 +#define USB_DEV_CLASS_MONITOR 0x04 +#define USB_DEV_CLASS_PHYSIC_IF 0x05 +#define USB_DEV_CLASS_POWER 0x06 +#define USB_DEV_CLASS_IMAGE 0x06 +#define USB_DEV_CLASS_PRINTER 0x07 +#define USB_DEV_CLASS_STORAGE 0x08 +#define USB_DEV_CLASS_HUB 0x09 +#define USB_DEV_CLASS_VEN_SPEC 0xFF +#endif + +/* USB Hub Class Request */ +#ifndef HUB_GET_HUB_DESCRIPTOR +#define HUB_CLEAR_HUB_FEATURE 0x20 +#define HUB_CLEAR_PORT_FEATURE 0x23 +#define HUB_GET_BUS_STATE 0xA3 +#define HUB_GET_HUB_DESCRIPTOR 0xA0 +#define HUB_GET_HUB_STATUS 0xA0 +#define HUB_GET_PORT_STATUS 0xA3 +#define HUB_SET_HUB_DESCRIPTOR 0x20 +#define HUB_SET_HUB_FEATURE 0x20 +#define HUB_SET_PORT_FEATURE 0x23 +#endif + +/* Hub Class Feature Selectors */ +#ifndef HUB_PORT_RESET +#define HUB_C_HUB_LOCAL_POWER 0 +#define HUB_C_HUB_OVER_CURRENT 1 +#define HUB_PORT_CONNECTION 0 +#define HUB_PORT_ENABLE 1 +#define HUB_PORT_SUSPEND 2 +#define HUB_PORT_OVER_CURRENT 3 +#define HUB_PORT_RESET 4 +#define HUB_PORT_POWER 8 +#define HUB_PORT_LOW_SPEED 9 +#define HUB_C_PORT_CONNECTION 16 +#define HUB_C_PORT_ENABLE 17 +#define HUB_C_PORT_SUSPEND 18 +#define HUB_C_PORT_OVER_CURRENT 19 +#define HUB_C_PORT_RESET 20 +#endif + +/* USB HID Class Request Code */ +#ifndef HID_GET_REPORT +#define HID_GET_REPORT 0x01 +#define HID_GET_IDLE 0x02 +#define HID_GET_PROTOCOL 0x03 +#define HID_SET_REPORT 0x09 +#define HID_SET_IDLE 0x0A +#define HID_SET_PROTOCOL 0x0B +#endif + +/* USB CDC Class request code */ +#ifndef CDC_GET_LINE_CODING +#define CDC_GET_LINE_CODING 0X21 /* This request allows the host to find out the currently configured line coding */ +#define CDC_SET_LINE_CODING 0x20 /* Configures DTE rate, stop-bits, parity, and number-of-character */ +#define CDC_SET_LINE_CTLSTE 0X22 /* This request generates RS-232/V.24 style control signals */ +#define CDC_SEND_BREAK 0X23 /* Sends special carrier modulation used to specify RS-232 style break */ +#endif + +/* USB UDisk */ +#ifndef USB_BO_CBW_SIZE +#define USB_BO_CBW_SIZE 0x1F +#define USB_BO_CSW_SIZE 0x0D +#endif +#ifndef USB_BO_CBW_SIG0 +#define USB_BO_CBW_SIG0 0x55 +#define USB_BO_CBW_SIG1 0x53 +#define USB_BO_CBW_SIG2 0x42 +#define USB_BO_CBW_SIG3 0x43 +#define USB_BO_CSW_SIG0 0x55 +#define USB_BO_CSW_SIG1 0x53 +#define USB_BO_CSW_SIG2 0x42 +#define USB_BO_CSW_SIG3 0x53 +#endif + + +/*******************************************************************************/ +/* USBFS Related Register Macro Definition */ + +/* R8_USB_CTRL */ +#define USBFS_UC_HOST_MODE 0x80 +#define USBFS_UC_LOW_SPEED 0x40 +#define USBFS_UC_DEV_PU_EN 0x20 +#define USBFS_UC_SYS_CTRL_MASK 0x30 +#define USBFS_UC_SYS_CTRL0 0x00 +#define USBFS_UC_SYS_CTRL1 0x10 +#define USBFS_UC_SYS_CTRL2 0x20 +#define USBFS_UC_SYS_CTRL3 0x30 +#define USBFS_UC_INT_BUSY 0x08 +#define USBFS_UC_RESET_SIE 0x04 +#define USBFS_UC_CLR_ALL 0x02 +#define USBFS_UC_DMA_EN 0x01 + +/* R8_USB_INT_EN */ +#define USBFS_UIE_DEV_NAK 0x40 +#define USBFS_UIE_FIFO_OV 0x10 +#define USBFS_UIE_HST_SOF 0x08 +#define USBFS_UIE_SUSPEND 0x04 +#define USBFS_UIE_TRANSFER 0x02 +#define USBFS_UIE_DETECT 0x01 +#define USBFS_UIE_BUS_RST 0x01 + +/* R8_USB_DEV_AD */ +#define USBFS_UDA_GP_BIT 0x80 +#define USBFS_USB_ADDR_MASK 0x7F + +/* R8_USB_MIS_ST */ +#define USBFS_UMS_SOF_PRES 0x80 +#define USBFS_UMS_SOF_ACT 0x40 +#define USBFS_UMS_SIE_FREE 0x20 +#define USBFS_UMS_R_FIFO_RDY 0x10 +#define USBFS_UMS_BUS_RESET 0x08 +#define USBFS_UMS_SUSPEND 0x04 +#define USBFS_UMS_DM_LEVEL 0x02 +#define USBFS_UMS_DEV_ATTACH 0x01 + +/* R8_USB_INT_FG */ +#define USBFS_U_IS_NAK 0x80 // RO, indicate current USB transfer is NAK received +#define USBFS_U_TOG_OK 0x40 // RO, indicate current USB transfer toggle is OK +#define USBFS_U_SIE_FREE 0x20 // RO, indicate USB SIE free status +#define USBFS_UIF_FIFO_OV 0x10 // FIFO overflow interrupt flag for USB, direct bit address clear or write 1 to clear +#define USBFS_UIF_HST_SOF 0x08 // host SOF timer interrupt flag for USB host, direct bit address clear or write 1 to clear +#define USBFS_UIF_SUSPEND 0x04 // USB suspend or resume event interrupt flag, direct bit address clear or write 1 to clear +#define USBFS_UIF_TRANSFER 0x02 // USB transfer completion interrupt flag, direct bit address clear or write 1 to clear +#define USBFS_UIF_DETECT 0x01 // device detected event interrupt flag for USB host mode, direct bit address clear or write 1 to clear +#define USBFS_UIF_BUS_RST 0x01 // bus reset event interrupt flag for USB device mode, direct bit address clear or write 1 to clear + +/* R8_USB_INT_ST */ +#define USBFS_UIS_IS_NAK 0x80 // RO, indicate current USB transfer is NAK received for USB device mode +#define USBFS_UIS_TOG_OK 0x40 // RO, indicate current USB transfer toggle is OK +#define USBFS_UIS_TOKEN_MASK 0x30 // RO, bit mask of current token PID code received for USB device mode +#define USBFS_UIS_TOKEN_OUT 0x00 +#define USBFS_UIS_TOKEN_IN 0x20 +#define USBFS_UIS_TOKEN_SETUP 0x30 +// bUIS_TOKEN1 & bUIS_TOKEN0: current token PID code received for USB device mode +// 00: OUT token PID received +// 10: IN token PID received +// 11: SETUP token PID received +#define USBFS_UIS_ENDP_MASK 0x0F // RO, bit mask of current transfer endpoint number for USB device mode +#define USBFS_UIS_H_RES_MASK 0x0F // RO, bit mask of current transfer handshake response for USB host mode: 0000=no response, time out from device, others=handshake response PID received + +/* R32_USB_OTG_CR */ +#define USBFS_CR_SESS_VTH 0x20 +#define USBFS_CR_VBUS_VTH 0x10 +#define USBFS_CR_OTG_EN 0x08 +#define USBFS_CR_IDPU 0x04 +#define USBFS_CR_CHARGE_VBUS 0x02 +#define USBFS_CR_DISCHAR_VBUS 0x01 + +/* R32_USB_OTG_SR */ +#define USBFS_SR_ID_DIG 0x08 +#define USBFS_SR_SESS_END 0x04 +#define USBFS_SR_SESS_VLD 0x02 +#define USBFS_SR_VBUS_VLD 0x01 + +/* R8_UDEV_CTRL */ +#define USBFS_UD_PD_DIS 0x80 // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable +#define USBFS_UD_DP_PIN 0x20 // ReadOnly: indicate current UDP pin level +#define USBFS_UD_DM_PIN 0x10 // ReadOnly: indicate current UDM pin level +#define USBFS_UD_LOW_SPEED 0x04 // enable USB physical port low speed: 0=full speed, 1=low speed +#define USBFS_UD_GP_BIT 0x02 // general purpose bit +#define USBFS_UD_PORT_EN 0x01 // enable USB physical port I/O: 0=disable, 1=enable + +/* R8_UEP4_1_MOD */ +#define USBFS_UEP1_RX_EN 0x80 // enable USB endpoint 1 receiving (OUT) +#define USBFS_UEP1_TX_EN 0x40 // enable USB endpoint 1 transmittal (IN) +#define USBFS_UEP1_BUF_MOD 0x10 // buffer mode of USB endpoint 1 +#define USBFS_UEP4_RX_EN 0x08 // enable USB endpoint 4 receiving (OUT) +#define USBFS_UEP4_TX_EN 0x04 // enable USB endpoint 4 transmittal (IN) +#define USBFS_UEP4_BUF_MOD 0x01 + +/* R8_UEP2_3_MOD */ +#define USBFS_UEP3_RX_EN 0x80 // enable USB endpoint 3 receiving (OUT) +#define USBFS_UEP3_TX_EN 0x40 // enable USB endpoint 3 transmittal (IN) +#define USBFS_UEP3_BUF_MOD 0x10 // buffer mode of USB endpoint 3 +#define USBFS_UEP2_RX_EN 0x08 // enable USB endpoint 2 receiving (OUT) +#define USBFS_UEP2_TX_EN 0x04 // enable USB endpoint 2 transmittal (IN) +#define USBFS_UEP2_BUF_MOD 0x01 // buffer mode of USB endpoint 2 + +/* R8_UEP5_6_MOD */ +#define USBFS_UEP6_RX_EN 0x80 // enable USB endpoint 6 receiving (OUT) +#define USBFS_UEP6_TX_EN 0x40 // enable USB endpoint 6 transmittal (IN) +#define USBFS_UEP6_BUF_MOD 0x10 // buffer mode of USB endpoint 6 +#define USBFS_UEP5_RX_EN 0x08 // enable USB endpoint 5 receiving (OUT) +#define USBFS_UEP5_TX_EN 0x04 // enable USB endpoint 5 transmittal (IN) +#define USBFS_UEP5_BUF_MOD 0x01 // buffer mode of USB endpoint 5 + +/* R8_UEP7_MOD */ +#define USBFS_UEP7_RX_EN 0x08 // enable USB endpoint 7 receiving (OUT) +#define USBFS_UEP7_TX_EN 0x04 // enable USB endpoint 7 transmittal (IN) +#define USBFS_UEP7_BUF_MOD 0x01 // buffer mode of USB endpoint 7 + +/* R8_UEPn_TX_CTRL */ +#define USBFS_UEP_T_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion on endpoint 1/2/3: 0=manual toggle, 1=automatic toggle +#define USBFS_UEP_T_TOG 0x04 // prepared data toggle flag of USB endpoint X transmittal (IN): 0=DATA0, 1=DATA1 +#define USBFS_UEP_T_RES_MASK 0x03 // bit mask of handshake response type for USB endpoint X transmittal (IN) +#define USBFS_UEP_T_RES_ACK 0x00 +#define USBFS_UEP_T_RES_NONE 0x01 +#define USBFS_UEP_T_RES_NAK 0x02 +#define USBFS_UEP_T_RES_STALL 0x03 +// bUEP_T_RES1 & bUEP_T_RES0: handshake response type for USB endpoint X transmittal (IN) +// 00: DATA0 or DATA1 then expecting ACK (ready) +// 01: DATA0 or DATA1 then expecting no response, time out from host, for non-zero endpoint isochronous transactions +// 10: NAK (busy) +// 11: STALL (error) +// host aux setup + +/* R8_UEPn_RX_CTRL, n=0-7 */ +#define USBFS_UEP_R_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion on endpoint 1/2/3: 0=manual toggle, 1=automatic toggle +#define USBFS_UEP_R_TOG 0x04 // expected data toggle flag of USB endpoint X receiving (OUT): 0=DATA0, 1=DATA1 +#define USBFS_UEP_R_RES_MASK 0x03 // bit mask of handshake response type for USB endpoint X receiving (OUT) +#define USBFS_UEP_R_RES_ACK 0x00 +#define USBFS_UEP_R_RES_NONE 0x01 +#define USBFS_UEP_R_RES_NAK 0x02 +#define USBFS_UEP_R_RES_STALL 0x03 +// RB_UEP_R_RES1 & RB_UEP_R_RES0: handshake response type for USB endpoint X receiving (OUT) +// 00: ACK (ready) +// 01: no response, time out to host, for non-zero endpoint isochronous transactions +// 10: NAK (busy) +// 11: STALL (error) + +/* R8_UHOST_CTRL */ +#define USBFS_UH_PD_DIS 0x80 // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable +#define USBFS_UH_DP_PIN 0x20 // ReadOnly: indicate current UDP pin level +#define USBFS_UH_DM_PIN 0x10 // ReadOnly: indicate current UDM pin level +#define USBFS_UH_LOW_SPEED 0x04 // enable USB port low speed: 0=full speed, 1=low speed +#define USBFS_UH_BUS_RESET 0x02 // control USB bus reset: 0=normal, 1=force bus reset +#define USBFS_UH_PORT_EN 0x01 // enable USB port: 0=disable, 1=enable port, automatic disabled if USB device detached + +/* R32_UH_EP_MOD */ +#define USBFS_UH_EP_TX_EN 0x40 // enable USB host OUT endpoint transmittal +#define USBFS_UH_EP_TBUF_MOD 0x10 // buffer mode of USB host OUT endpoint +// bUH_EP_TX_EN & bUH_EP_TBUF_MOD: USB host OUT endpoint buffer mode, buffer start address is UH_TX_DMA +// 0 x: disable endpoint and disable buffer +// 1 0: 64 bytes buffer for transmittal (OUT endpoint) +// 1 1: dual 64 bytes buffer by toggle bit bUH_T_TOG selection for transmittal (OUT endpoint), total=128bytes +#define USBFS_UH_EP_RX_EN 0x08 // enable USB host IN endpoint receiving +#define USBFS_UH_EP_RBUF_MOD 0x01 // buffer mode of USB host IN endpoint +// bUH_EP_RX_EN & bUH_EP_RBUF_MOD: USB host IN endpoint buffer mode, buffer start address is UH_RX_DMA +// 0 x: disable endpoint and disable buffer +// 1 0: 64 bytes buffer for receiving (IN endpoint) +// 1 1: dual 64 bytes buffer by toggle bit bUH_R_TOG selection for receiving (IN endpoint), total=128bytes + +/* R16_UH_SETUP */ +#define USBFS_UH_PRE_PID_EN 0x0400 // USB host PRE PID enable for low speed device via hub +#define USBFS_UH_SOF_EN 0x0004 // USB host automatic SOF enable + +/* R8_UH_EP_PID */ +#define USBFS_UH_TOKEN_MASK 0xF0 // bit mask of token PID for USB host transfer +#define USBFS_UH_ENDP_MASK 0x0F // bit mask of endpoint number for USB host transfer + +/* R8_UH_RX_CTRL */ +#define USBFS_UH_R_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle +#define USBFS_UH_R_TOG 0x04 // expected data toggle flag of host receiving (IN): 0=DATA0, 1=DATA1 +#define USBFS_UH_R_RES 0x01 // prepared handshake response type for host receiving (IN): 0=ACK (ready), 1=no response, time out to device, for isochronous transactions + +/* R8_UH_TX_CTRL */ +#define USBFS_UH_T_AUTO_TOG 0x08 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle +#define USBFS_UH_T_TOG 0x04 // prepared data toggle flag of host transmittal (SETUP/OUT): 0=DATA0, 1=DATA1 +#define USBFS_UH_T_RES 0x01 // expected handshake response type for host transmittal (SETUP/OUT): 0=ACK (ready), 1=no response, time out from device, for isochronous transactions + + +/*******************************************************************************/ +/* Struct Definition */ + +/* USB Setup Request */ +typedef struct __attribute__((packed)) _USB_SETUP_REQ +{ + uint8_t bRequestType; + uint8_t bRequest; + uint16_t wValue; + uint16_t wIndex; + uint16_t wLength; +} USB_SETUP_REQ, *PUSB_SETUP_REQ; + +/* USB Device Descriptor */ +typedef struct __attribute__((packed)) _USB_DEVICE_DESCR +{ + uint8_t bLength; + uint8_t bDescriptorType; + uint16_t bcdUSB; + uint8_t bDeviceClass; + uint8_t bDeviceSubClass; + uint8_t bDeviceProtocol; + uint8_t bMaxPacketSize0; + uint16_t idVendor; + uint16_t idProduct; + uint16_t bcdDevice; + uint8_t iManufacturer; + uint8_t iProduct; + uint8_t iSerialNumber; + uint8_t bNumConfigurations; +} USB_DEV_DESCR, *PUSB_DEV_DESCR; + +/* USB Configuration Descriptor */ +typedef struct __attribute__((packed)) _USB_CONFIG_DESCR +{ + uint8_t bLength; + uint8_t bDescriptorType; + uint16_t wTotalLength; + uint8_t bNumInterfaces; + uint8_t bConfigurationValue; + uint8_t iConfiguration; + uint8_t bmAttributes; + uint8_t MaxPower; +} USB_CFG_DESCR, *PUSB_CFG_DESCR; + +/* USB Interface Descriptor */ +typedef struct __attribute__((packed)) _USB_INTERF_DESCR +{ + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bInterfaceNumber; + uint8_t bAlternateSetting; + uint8_t bNumEndpoints; + uint8_t bInterfaceClass; + uint8_t bInterfaceSubClass; + uint8_t bInterfaceProtocol; + uint8_t iInterface; +} USB_ITF_DESCR, *PUSB_ITF_DESCR; + +/* USB Endpoint Descriptor */ +typedef struct __attribute__((packed)) _USB_ENDPOINT_DESCR +{ + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bEndpointAddress; + uint8_t bmAttributes; + uint8_t wMaxPacketSizeL; + uint8_t wMaxPacketSizeH; + uint8_t bInterval; +} USB_ENDP_DESCR, *PUSB_ENDP_DESCR; + +/* USB Configuration Descriptor Set */ +typedef struct __attribute__((packed)) _USB_CONFIG_DESCR_LONG +{ + USB_CFG_DESCR cfg_descr; + USB_ITF_DESCR itf_descr; + USB_ENDP_DESCR endp_descr[ 1 ]; +} USB_CFG_DESCR_LONG, *PUSB_CFG_DESCR_LONG; + +/* USB HUB Descriptor */ +typedef struct __attribute__((packed)) _USB_HUB_DESCR +{ + uint8_t bDescLength; + uint8_t bDescriptorType; + uint8_t bNbrPorts; + uint8_t wHubCharacteristicsL; + uint8_t wHubCharacteristicsH; + uint8_t bPwrOn2PwrGood; + uint8_t bHubContrCurrent; + uint8_t DeviceRemovable; + uint8_t PortPwrCtrlMask; +} USB_HUB_DESCR, *PUSB_HUB_DESCR; + +/* USB HID Descriptor */ +typedef struct __attribute__((packed)) _USB_HID_DESCR +{ + uint8_t bLength; + uint8_t bDescriptorType; + uint16_t bcdHID; + uint8_t bCountryCode; + uint8_t bNumDescriptors; + uint8_t bDescriptorTypeX; + uint8_t wDescriptorLengthL; + uint8_t wDescriptorLengthH; +} USB_HID_DESCR, *PUSB_HID_DESCR; + +/* USB UDisk */ +typedef struct __attribute__((packed)) _UDISK_BOC_CBW +{ + uint32_t mCBW_Sig; + uint32_t mCBW_Tag; + uint32_t mCBW_DataLen; + uint8_t mCBW_Flag; + uint8_t mCBW_LUN; + uint8_t mCBW_CB_Len; + uint8_t mCBW_CB_Buf[ 16 ]; +} UDISK_BOC_CBW, *PXUDISK_BOC_CBW; + +/* USB UDisk */ +typedef struct __attribute__((packed)) _UDISK_BOC_CSW +{ + uint32_t mCBW_Sig; + uint32_t mCBW_Tag; + uint32_t mCSW_Residue; + uint8_t mCSW_Status; +} UDISK_BOC_CSW, *PXUDISK_BOC_CSW; + + +#ifdef __cplusplus +} +#endif + +#endif /*_CH32V20X_USB_H */ diff --git a/gat_stand_fw/periph/inc/ch32v20x_wwdg.h b/gat_stand_fw/periph/inc/ch32v20x_wwdg.h new file mode 100644 index 0000000..aaec893 --- /dev/null +++ b/gat_stand_fw/periph/inc/ch32v20x_wwdg.h @@ -0,0 +1,41 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_wwdg.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains all the functions prototypes for the WWDG + * firmware library. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_WWDG_H +#define __CH32V20x_WWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +/* WWDG_Prescaler */ +#define WWDG_Prescaler_1 ((uint32_t)0x00000000) +#define WWDG_Prescaler_2 ((uint32_t)0x00000080) +#define WWDG_Prescaler_4 ((uint32_t)0x00000100) +#define WWDG_Prescaler_8 ((uint32_t)0x00000180) + +void WWDG_DeInit(void); +void WWDG_SetPrescaler(uint32_t WWDG_Prescaler); +void WWDG_SetWindowValue(uint8_t WindowValue); +void WWDG_EnableIT(void); +void WWDG_SetCounter(uint8_t Counter); +void WWDG_Enable(uint8_t Counter); +FlagStatus WWDG_GetFlagStatus(void); +void WWDG_ClearFlag(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/gat_stand_fw/periph/src/ch32v20x_adc.c b/gat_stand_fw/periph/src/ch32v20x_adc.c new file mode 100644 index 0000000..66d4b8f --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_adc.c @@ -0,0 +1,1210 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_adc.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the ADC firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_adc.h" +#include "ch32v20x_rcc.h" + +/* ADC DISCNUM mask */ +#define CTLR1_DISCNUM_Reset ((uint32_t)0xFFFF1FFF) + +/* ADC DISCEN mask */ +#define CTLR1_DISCEN_Set ((uint32_t)0x00000800) +#define CTLR1_DISCEN_Reset ((uint32_t)0xFFFFF7FF) + +/* ADC JAUTO mask */ +#define CTLR1_JAUTO_Set ((uint32_t)0x00000400) +#define CTLR1_JAUTO_Reset ((uint32_t)0xFFFFFBFF) + +/* ADC JDISCEN mask */ +#define CTLR1_JDISCEN_Set ((uint32_t)0x00001000) +#define CTLR1_JDISCEN_Reset ((uint32_t)0xFFFFEFFF) + +/* ADC AWDCH mask */ +#define CTLR1_AWDCH_Reset ((uint32_t)0xFFFFFFE0) + +/* ADC Analog watchdog enable mode mask */ +#define CTLR1_AWDMode_Reset ((uint32_t)0xFF3FFDFF) + +/* CTLR1 register Mask */ +#define CTLR1_CLEAR_Mask ((uint32_t)0xE0F0FEFF) + +/* ADC ADON mask */ +#define CTLR2_ADON_Set ((uint32_t)0x00000001) +#define CTLR2_ADON_Reset ((uint32_t)0xFFFFFFFE) + +/* ADC DMA mask */ +#define CTLR2_DMA_Set ((uint32_t)0x00000100) +#define CTLR2_DMA_Reset ((uint32_t)0xFFFFFEFF) + +/* ADC RSTCAL mask */ +#define CTLR2_RSTCAL_Set ((uint32_t)0x00000008) + +/* ADC CAL mask */ +#define CTLR2_CAL_Set ((uint32_t)0x00000004) + +/* ADC SWSTART mask */ +#define CTLR2_SWSTART_Set ((uint32_t)0x00400000) + +/* ADC EXTTRIG mask */ +#define CTLR2_EXTTRIG_Set ((uint32_t)0x00100000) +#define CTLR2_EXTTRIG_Reset ((uint32_t)0xFFEFFFFF) + +/* ADC Software start mask */ +#define CTLR2_EXTTRIG_SWSTART_Set ((uint32_t)0x00500000) +#define CTLR2_EXTTRIG_SWSTART_Reset ((uint32_t)0xFFAFFFFF) + +/* ADC JEXTSEL mask */ +#define CTLR2_JEXTSEL_Reset ((uint32_t)0xFFFF8FFF) + +/* ADC JEXTTRIG mask */ +#define CTLR2_JEXTTRIG_Set ((uint32_t)0x00008000) +#define CTLR2_JEXTTRIG_Reset ((uint32_t)0xFFFF7FFF) + +/* ADC JSWSTART mask */ +#define CTLR2_JSWSTART_Set ((uint32_t)0x00200000) + +/* ADC injected software start mask */ +#define CTLR2_JEXTTRIG_JSWSTART_Set ((uint32_t)0x00208000) +#define CTLR2_JEXTTRIG_JSWSTART_Reset ((uint32_t)0xFFDF7FFF) + +/* ADC TSPD mask */ +#define CTLR2_TSVREFE_Set ((uint32_t)0x00800000) +#define CTLR2_TSVREFE_Reset ((uint32_t)0xFF7FFFFF) + +/* CTLR2 register Mask */ +#define CTLR2_CLEAR_Mask ((uint32_t)0xFFF1F7FD) + +/* ADC SQx mask */ +#define RSQR3_SQ_Set ((uint32_t)0x0000001F) +#define RSQR2_SQ_Set ((uint32_t)0x0000001F) +#define RSQR1_SQ_Set ((uint32_t)0x0000001F) + +/* RSQR1 register Mask */ +#define RSQR1_CLEAR_Mask ((uint32_t)0xFF0FFFFF) + +/* ADC JSQx mask */ +#define ISQR_JSQ_Set ((uint32_t)0x0000001F) + +/* ADC JL mask */ +#define ISQR_JL_Set ((uint32_t)0x00300000) +#define ISQR_JL_Reset ((uint32_t)0xFFCFFFFF) + +/* ADC SMPx mask */ +#define SAMPTR1_SMP_Set ((uint32_t)0x00000007) +#define SAMPTR2_SMP_Set ((uint32_t)0x00000007) + +/* ADC IDATARx registers offset */ +#define IDATAR_Offset ((uint8_t)0x28) + +/* ADC1 RDATAR register base address */ +#define RDATAR_ADDRESS ((uint32_t)0x4001244C) + +/********************************************************************* + * @fn ADC_DeInit + * + * @brief Deinitializes the ADCx peripheral registers to their default + * reset values. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * + * @return none + */ +void ADC_DeInit(ADC_TypeDef *ADCx) +{ + if(ADCx == ADC1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE); + } + else if(ADCx == ADC2) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE); + } +} + +/********************************************************************* + * @fn ADC_Init + * + * @brief Initializes the ADCx peripheral according to the specified + * parameters in the ADC_InitStruct. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_InitStruct - pointer to an ADC_InitTypeDef structure that + * contains the configuration information for the specified ADC + * peripheral. + * + * @return none + */ +void ADC_Init(ADC_TypeDef *ADCx, ADC_InitTypeDef *ADC_InitStruct) +{ + uint32_t tmpreg1 = 0; + uint8_t tmpreg2 = 0; + + tmpreg1 = ADCx->CTLR1; + tmpreg1 &= CTLR1_CLEAR_Mask; + tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_Mode | (uint32_t)ADC_InitStruct->ADC_OutputBuffer | + (uint32_t)ADC_InitStruct->ADC_Pga | ((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8)); + ADCx->CTLR1 = tmpreg1; + + tmpreg1 = ADCx->CTLR2; + tmpreg1 &= CTLR2_CLEAR_Mask; + tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv | + ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1)); + ADCx->CTLR2 = tmpreg1; + + tmpreg1 = ADCx->RSQR1; + tmpreg1 &= RSQR1_CLEAR_Mask; + tmpreg2 |= (uint8_t)(ADC_InitStruct->ADC_NbrOfChannel - (uint8_t)1); + tmpreg1 |= (uint32_t)tmpreg2 << 20; + ADCx->RSQR1 = tmpreg1; +} + +/********************************************************************* + * @fn ADC_StructInit + * + * @brief Fills each ADC_InitStruct member with its default value. + * + * @param ADC_InitStruct - pointer to an ADC_InitTypeDef structure that + * contains the configuration information for the specified ADC + * peripheral. + * + * @return none + */ +void ADC_StructInit(ADC_InitTypeDef *ADC_InitStruct) +{ + ADC_InitStruct->ADC_Mode = ADC_Mode_Independent; + ADC_InitStruct->ADC_ScanConvMode = DISABLE; + ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; + ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1; + ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; + ADC_InitStruct->ADC_NbrOfChannel = 1; +} + +/********************************************************************* + * @fn ADC_Cmd + * + * @brief Enables or disables the specified ADC peripheral. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void ADC_Cmd(ADC_TypeDef *ADCx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + ADCx->CTLR2 |= CTLR2_ADON_Set; + } + else + { + ADCx->CTLR2 &= CTLR2_ADON_Reset; + } +} + +/********************************************************************* + * @fn ADC_DMACmd + * + * @brief Enables or disables the specified ADC DMA request. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void ADC_DMACmd(ADC_TypeDef *ADCx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + ADCx->CTLR2 |= CTLR2_DMA_Set; + } + else + { + ADCx->CTLR2 &= CTLR2_DMA_Reset; + } +} + +/********************************************************************* + * @fn ADC_ITConfig + * + * @brief Enables or disables the specified ADC interrupts. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_IT - specifies the ADC interrupt sources to be enabled or disabled. + * ADC_IT_EOC - End of conversion interrupt mask. + * ADC_IT_AWD - Analog watchdog interrupt mask. + * ADC_IT_JEOC - End of injected conversion interrupt mask. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void ADC_ITConfig(ADC_TypeDef *ADCx, uint16_t ADC_IT, FunctionalState NewState) +{ + uint8_t itmask = 0; + + itmask = (uint8_t)ADC_IT; + + if(NewState != DISABLE) + { + ADCx->CTLR1 |= itmask; + } + else + { + ADCx->CTLR1 &= (~(uint32_t)itmask); + } +} + +/********************************************************************* + * @fn ADC_ResetCalibration + * + * @brief Resets the selected ADC calibration registers. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * + * @return none + */ +void ADC_ResetCalibration(ADC_TypeDef *ADCx) +{ + ADCx->CTLR2 |= CTLR2_RSTCAL_Set; +} + +/********************************************************************* + * @fn ADC_GetResetCalibrationStatus + * + * @brief Gets the selected ADC reset calibration registers status. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * + * @return FlagStatus: SET or RESET. + */ +FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef *ADCx) +{ + FlagStatus bitstatus = RESET; + + if((ADCx->CTLR2 & CTLR2_RSTCAL_Set) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn ADC_StartCalibration + * + * @brief Starts the selected ADC calibration process. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * + * @return None + */ +void ADC_StartCalibration(ADC_TypeDef *ADCx) +{ + ADCx->CTLR2 |= CTLR2_CAL_Set; +} + +/********************************************************************* + * @fn ADC_GetCalibrationStatus + * + * @brief Gets the selected ADC calibration status. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * + * @return FlagStatus: SET or RESET. + */ +FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef *ADCx) +{ + FlagStatus bitstatus = RESET; + + if((ADCx->CTLR2 & CTLR2_CAL_Set) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn ADC_SoftwareStartConvCmd + * + * @brief Enables or disables the selected ADC software start conversion. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * NewState - ENABLE or DISABLE. + * + * @return None + */ +void ADC_SoftwareStartConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + ADCx->CTLR2 |= CTLR2_EXTTRIG_SWSTART_Set; + } + else + { + ADCx->CTLR2 &= CTLR2_EXTTRIG_SWSTART_Reset; + } +} + +/********************************************************************* + * @fn ADC_GetSoftwareStartConvStatus + * + * @brief Gets the selected ADC Software start conversion Status. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * + * @return FlagStatus - SET or RESET. + */ + +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef *ADCx) +{ + FlagStatus bitstatus = RESET; + + if((ADCx->CTLR2 & CTLR2_SWSTART_Set) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn ADC_DiscModeChannelCountConfig + * + * @brief Configures the discontinuous mode for the selected ADC regular + * group channel. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * Number - specifies the discontinuous mode regular channel + * count value(1-8). + * + * @return None + */ +void ADC_DiscModeChannelCountConfig(ADC_TypeDef *ADCx, uint8_t Number) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + + tmpreg1 = ADCx->CTLR1; + tmpreg1 &= CTLR1_DISCNUM_Reset; + tmpreg2 = Number - 1; + tmpreg1 |= tmpreg2 << 13; + ADCx->CTLR1 = tmpreg1; +} + +/********************************************************************* + * @fn ADC_DiscModeCmd + * + * @brief Enables or disables the discontinuous mode on regular group + * channel for the specified ADC. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * NewState - ENABLE or DISABLE. + * + * @return None + */ +void ADC_DiscModeCmd(ADC_TypeDef *ADCx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + ADCx->CTLR1 |= CTLR1_DISCEN_Set; + } + else + { + ADCx->CTLR1 &= CTLR1_DISCEN_Reset; + } +} + +/********************************************************************* + * @fn ADC_RegularChannelConfig + * + * @brief Configures for the selected ADC regular channel its corresponding + * rank in the sequencer and its sample time. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_Channel - the ADC channel to configure. + * ADC_Channel_0 - ADC Channel0 selected. + * ADC_Channel_1 - ADC Channel1 selected. + * ADC_Channel_2 - ADC Channel2 selected. + * ADC_Channel_3 - ADC Channel3 selected. + * ADC_Channel_4 - ADC Channel4 selected. + * ADC_Channel_5 - ADC Channel5 selected. + * ADC_Channel_6 - ADC Channel6 selected. + * ADC_Channel_7 - ADC Channel7 selected. + * ADC_Channel_8 - ADC Channel8 selected. + * ADC_Channel_9 - ADC Channel9 selected. + * ADC_Channel_10 - ADC Channel10 selected. + * ADC_Channel_11 - ADC Channel11 selected. + * ADC_Channel_12 - ADC Channel12 selected. + * ADC_Channel_13 - ADC Channel13 selected. + * ADC_Channel_14 - ADC Channel14 selected. + * ADC_Channel_15 - ADC Channel15 selected. + * ADC_Channel_16 - ADC Channel16 selected. + * ADC_Channel_17 - ADC Channel17 selected. + * Rank - The rank in the regular group sequencer. + * This parameter must be between 1 to 16. + * ADC_SampleTime - The sample time value to be set for the selected channel. + * ADC_SampleTime_1Cycles5 - Sample time equal to 1.5 cycles. + * ADC_SampleTime_7Cycles5 - Sample time equal to 7.5 cycles. + * ADC_SampleTime_13Cycles5 - Sample time equal to 13.5 cycles. + * ADC_SampleTime_28Cycles5 - Sample time equal to 28.5 cycles. + * ADC_SampleTime_41Cycles5 - Sample time equal to 41.5 cycles. + * ADC_SampleTime_55Cycles5 - Sample time equal to 55.5 cycles. + * ADC_SampleTime_71Cycles5 - Sample time equal to 71.5 cycles. + * ADC_SampleTime_239Cycles5 - Sample time equal to 239.5 cycles. + * + * @return None + */ +void ADC_RegularChannelConfig(ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0; + + if(ADC_Channel > ADC_Channel_9) + { + tmpreg1 = ADCx->SAMPTR1; + tmpreg2 = SAMPTR1_SMP_Set << (3 * (ADC_Channel - 10)); + tmpreg1 &= ~tmpreg2; + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10)); + tmpreg1 |= tmpreg2; + ADCx->SAMPTR1 = tmpreg1; + } + else + { + tmpreg1 = ADCx->SAMPTR2; + tmpreg2 = SAMPTR2_SMP_Set << (3 * ADC_Channel); + tmpreg1 &= ~tmpreg2; + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + tmpreg1 |= tmpreg2; + ADCx->SAMPTR2 = tmpreg1; + } + + if(Rank < 7) + { + tmpreg1 = ADCx->RSQR3; + tmpreg2 = RSQR3_SQ_Set << (5 * (Rank - 1)); + tmpreg1 &= ~tmpreg2; + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1)); + tmpreg1 |= tmpreg2; + ADCx->RSQR3 = tmpreg1; + } + else if(Rank < 13) + { + tmpreg1 = ADCx->RSQR2; + tmpreg2 = RSQR2_SQ_Set << (5 * (Rank - 7)); + tmpreg1 &= ~tmpreg2; + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7)); + tmpreg1 |= tmpreg2; + ADCx->RSQR2 = tmpreg1; + } + else + { + tmpreg1 = ADCx->RSQR1; + tmpreg2 = RSQR1_SQ_Set << (5 * (Rank - 13)); + tmpreg1 &= ~tmpreg2; + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13)); + tmpreg1 |= tmpreg2; + ADCx->RSQR1 = tmpreg1; + } +} + +/********************************************************************* + * @fn ADC_ExternalTrigConvCmd + * + * @brief Enables or disables the ADCx conversion through external trigger. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * NewState - ENABLE or DISABLE. + * + * @return None + */ +void ADC_ExternalTrigConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + ADCx->CTLR2 |= CTLR2_EXTTRIG_Set; + } + else + { + ADCx->CTLR2 &= CTLR2_EXTTRIG_Reset; + } +} + +/********************************************************************* + * @fn ADC_GetConversionValue + * + * @brief Returns the last ADCx conversion result data for regular channel. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * + * @return ADCx->RDATAR - The Data conversion value. + */ +uint16_t ADC_GetConversionValue(ADC_TypeDef *ADCx) +{ + return (uint16_t)ADCx->RDATAR; +} + +/********************************************************************* + * @fn ADC_GetDualModeConversionValue + * + * @brief Returns the last ADC1 and ADC2 conversion result data in dual mode. + * + * @return RDATAR_ADDRESS - The Data conversion value. + */ +uint32_t ADC_GetDualModeConversionValue(void) +{ + return (*(__IO uint32_t *)RDATAR_ADDRESS); +} + +/********************************************************************* + * @fn ADC_AutoInjectedConvCmd + * + * @brief Enables or disables the selected ADC automatic injected group + * conversion after regular one. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * NewState - ENABLE or DISABLE. + * + * @return None + */ +void ADC_AutoInjectedConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + ADCx->CTLR1 |= CTLR1_JAUTO_Set; + } + else + { + ADCx->CTLR1 &= CTLR1_JAUTO_Reset; + } +} + +/********************************************************************* + * @fn ADC_InjectedDiscModeCmd + * + * @brief Enables or disables the discontinuous mode for injected group + * channel for the specified ADC. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * NewState - ENABLE or DISABLE. + * + * @return None + */ +void ADC_InjectedDiscModeCmd(ADC_TypeDef *ADCx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + ADCx->CTLR1 |= CTLR1_JDISCEN_Set; + } + else + { + ADCx->CTLR1 &= CTLR1_JDISCEN_Reset; + } +} + +/********************************************************************* + * @fn ADC_ExternalTrigInjectedConvConfig + * + * @brief Configures the ADCx external trigger for injected channels conversion. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_ExternalTrigInjecConv - specifies the ADC trigger to start + * injected conversion. + * ADC_ExternalTrigInjecConv_T1_TRGO - Timer1 TRGO event selected. + * ADC_ExternalTrigInjecConv_T1_CC4 - Timer1 capture compare4 selected. + * ADC_ExternalTrigInjecConv_T2_TRGO - Timer2 TRGO event selected. + * ADC_ExternalTrigInjecConv_T2_CC1 - Timer2 capture compare1 selected. + * ADC_ExternalTrigInjecConv_T3_CC4 - Timer3 capture compare4 selected. + * ADC_ExternalTrigInjecConv_T4_TRGO - Timer4 TRGO event selected. + * ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 - External interrupt + * line 15 event selected. + * ADC_ExternalTrigInjecConv_None: Injected conversion started + * by software and not by external trigger. + * + * @return None + */ +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef *ADCx, uint32_t ADC_ExternalTrigInjecConv) +{ + uint32_t tmpreg = 0; + + tmpreg = ADCx->CTLR2; + tmpreg &= CTLR2_JEXTSEL_Reset; + tmpreg |= ADC_ExternalTrigInjecConv; + ADCx->CTLR2 = tmpreg; +} + +/********************************************************************* + * @fn ADC_ExternalTrigInjectedConvCmd + * + * @brief Enables or disables the ADCx injected channels conversion through + * external trigger. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * NewState - ENABLE or DISABLE. + * + * @return None + */ +void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + ADCx->CTLR2 |= CTLR2_JEXTTRIG_Set; + } + else + { + ADCx->CTLR2 &= CTLR2_JEXTTRIG_Reset; + } +} + +/********************************************************************* + * @fn ADC_SoftwareStartInjectedConvCmd + * + * @brief Enables or disables the selected ADC start of the injected + * channels conversion. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * NewState - ENABLE or DISABLE. + * + * @return None + */ +void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef *ADCx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + ADCx->CTLR2 |= CTLR2_JEXTTRIG_JSWSTART_Set; + } + else + { + ADCx->CTLR2 &= CTLR2_JEXTTRIG_JSWSTART_Reset; + } +} + +/********************************************************************* + * @fn ADC_GetSoftwareStartInjectedConvCmdStatus + * + * @brief Gets the selected ADC Software start injected conversion Status. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * + * @return FlagStatus: SET or RESET. + */ +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef *ADCx) +{ + FlagStatus bitstatus = RESET; + + if((ADCx->CTLR2 & CTLR2_JSWSTART_Set) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn ADC_InjectedChannelConfig + * + * @brief Configures for the selected ADC injected channel its corresponding + * rank in the sequencer and its sample time. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_Channel - the ADC channel to configure. + * ADC_Channel_0 - ADC Channel0 selected. + * ADC_Channel_1 - ADC Channel1 selected. + * ADC_Channel_2 - ADC Channel2 selected. + * ADC_Channel_3 - ADC Channel3 selected. + * ADC_Channel_4 - ADC Channel4 selected. + * ADC_Channel_5 - ADC Channel5 selected. + * ADC_Channel_6 - ADC Channel6 selected. + * ADC_Channel_7 - ADC Channel7 selected. + * ADC_Channel_8 - ADC Channel8 selected. + * ADC_Channel_9 - ADC Channel9 selected. + * ADC_Channel_10 - ADC Channel10 selected. + * ADC_Channel_11 - ADC Channel11 selected. + * ADC_Channel_12 - ADC Channel12 selected. + * ADC_Channel_13 - ADC Channel13 selected. + * ADC_Channel_14 - ADC Channel14 selected. + * ADC_Channel_15 - ADC Channel15 selected. + * ADC_Channel_16 - ADC Channel16 selected. + * ADC_Channel_17 - ADC Channel17 selected. + * Rank - The rank in the regular group sequencer. + * This parameter must be between 1 to 4. + * ADC_SampleTime - The sample time value to be set for the selected channel. + * ADC_SampleTime_1Cycles5 - Sample time equal to 1.5 cycles. + * ADC_SampleTime_7Cycles5 - Sample time equal to 7.5 cycles. + * ADC_SampleTime_13Cycles5 - Sample time equal to 13.5 cycles. + * ADC_SampleTime_28Cycles5 - Sample time equal to 28.5 cycles. + * ADC_SampleTime_41Cycles5 - Sample time equal to 41.5 cycles. + * ADC_SampleTime_55Cycles5 - Sample time equal to 55.5 cycles. + * ADC_SampleTime_71Cycles5 - Sample time equal to 71.5 cycles. + * ADC_SampleTime_239Cycles5 - Sample time equal to 239.5 cycles. + * + * @return None + */ +void ADC_InjectedChannelConfig(ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0; + + if(ADC_Channel > ADC_Channel_9) + { + tmpreg1 = ADCx->SAMPTR1; + tmpreg2 = SAMPTR1_SMP_Set << (3 * (ADC_Channel - 10)); + tmpreg1 &= ~tmpreg2; + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10)); + tmpreg1 |= tmpreg2; + ADCx->SAMPTR1 = tmpreg1; + } + else + { + tmpreg1 = ADCx->SAMPTR2; + tmpreg2 = SAMPTR2_SMP_Set << (3 * ADC_Channel); + tmpreg1 &= ~tmpreg2; + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + tmpreg1 |= tmpreg2; + ADCx->SAMPTR2 = tmpreg1; + } + + tmpreg1 = ADCx->ISQR; + tmpreg3 = (tmpreg1 & ISQR_JL_Set) >> 20; + tmpreg2 = ISQR_JSQ_Set << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); + tmpreg1 &= ~tmpreg2; + tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); + tmpreg1 |= tmpreg2; + ADCx->ISQR = tmpreg1; +} + +/********************************************************************* + * @fn ADC_InjectedSequencerLengthConfig + * + * @brief Configures the sequencer length for injected channels. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * Length - The sequencer length. + * This parameter must be a number between 1 to 4. + * + * @return None + */ +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef *ADCx, uint8_t Length) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + + tmpreg1 = ADCx->ISQR; + tmpreg1 &= ISQR_JL_Reset; + tmpreg2 = Length - 1; + tmpreg1 |= tmpreg2 << 20; + ADCx->ISQR = tmpreg1; +} + +/********************************************************************* + * @fn ADC_SetInjectedOffset + * + * @brief Set the injected channels conversion value offset. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_InjectedChannel: the ADC injected channel to set its offset. + * ADC_InjectedChannel_1 - Injected Channel1 selected. + * ADC_InjectedChannel_2 - Injected Channel2 selected. + * ADC_InjectedChannel_3 - Injected Channel3 selected. + * ADC_InjectedChannel_4 - Injected Channel4 selected. + * Offset - the offset value for the selected ADC injected channel. + * This parameter must be a 12bit value. + * + * @return None + */ +void ADC_SetInjectedOffset(ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset) +{ + __IO uint32_t tmp = 0; + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel; + + *(__IO uint32_t *)tmp = (uint32_t)Offset; +} + +/********************************************************************* + * @fn ADC_GetInjectedConversionValue + * + * @brief Returns the ADC injected channel conversion result. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_InjectedChannel - the ADC injected channel to set its offset. + * ADC_InjectedChannel_1 - Injected Channel1 selected. + * ADC_InjectedChannel_2 - Injected Channel2 selected. + * ADC_InjectedChannel_3 - Injected Channel3 selected. + * ADC_InjectedChannel_4 - Injected Channel4 selected. + * + * @return tmp - The Data conversion value. + */ +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel) +{ + __IO uint32_t tmp = 0; + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel + IDATAR_Offset; + + return (uint16_t)(*(__IO uint32_t *)tmp); +} + +/********************************************************************* + * @fn ADC_AnalogWatchdogCmd + * + * @brief Enables or disables the analog watchdog on single/all regular + * or injected channels. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_AnalogWatchdog - the ADC analog watchdog configuration. + * ADC_AnalogWatchdog_SingleRegEnable - Analog watchdog on a + * single regular channel. + * ADC_AnalogWatchdog_SingleInjecEnable - Analog watchdog on a + * single injected channel. + * ADC_AnalogWatchdog_SingleRegOrInjecEnable - Analog watchdog + * on a single regular or injected channel. + * ADC_AnalogWatchdog_AllRegEnable - Analog watchdog on all + * regular channel. + * ADC_AnalogWatchdog_AllInjecEnable - Analog watchdog on all + * injected channel. + * ADC_AnalogWatchdog_AllRegAllInjecEnable - Analog watchdog on + * all regular and injected channels. + * ADC_AnalogWatchdog_None - No channel guarded by the analog + * watchdog. + * + * @return none + */ +void ADC_AnalogWatchdogCmd(ADC_TypeDef *ADCx, uint32_t ADC_AnalogWatchdog) +{ + uint32_t tmpreg = 0; + + tmpreg = ADCx->CTLR1; + tmpreg &= CTLR1_AWDMode_Reset; + tmpreg |= ADC_AnalogWatchdog; + ADCx->CTLR1 = tmpreg; +} + +/********************************************************************* + * @fn ADC_AnalogWatchdogThresholdsConfig + * + * @brief Configures the high and low thresholds of the analog watchdog. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * HighThreshold - the ADC analog watchdog High threshold value. + * This parameter must be a 12bit value. + * LowThreshold - the ADC analog watchdog Low threshold value. + * This parameter must be a 12bit value. + * + * @return none + */ +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef *ADCx, uint16_t HighThreshold, + uint16_t LowThreshold) +{ + ADCx->WDHTR = HighThreshold; + ADCx->WDLTR = LowThreshold; +} + +/********************************************************************* + * @fn ADC_AnalogWatchdogSingleChannelConfig + * + * @brief Configures the analog watchdog guarded single channel. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_Channel - the ADC channel to configure. + * ADC_Channel_0 - ADC Channel0 selected. + * ADC_Channel_1 - ADC Channel1 selected. + * ADC_Channel_2 - ADC Channel2 selected. + * ADC_Channel_3 - ADC Channel3 selected. + * ADC_Channel_4 - ADC Channel4 selected. + * ADC_Channel_5 - ADC Channel5 selected. + * ADC_Channel_6 - ADC Channel6 selected. + * ADC_Channel_7 - ADC Channel7 selected. + * ADC_Channel_8 - ADC Channel8 selected. + * ADC_Channel_9 - ADC Channel9 selected. + * ADC_Channel_10 - ADC Channel10 selected. + * ADC_Channel_11 - ADC Channel11 selected. + * ADC_Channel_12 - ADC Channel12 selected. + * ADC_Channel_13 - ADC Channel13 selected. + * ADC_Channel_14 - ADC Channel14 selected. + * ADC_Channel_15 - ADC Channel15 selected. + * ADC_Channel_16 - ADC Channel16 selected. + * ADC_Channel_17 - ADC Channel17 selected. + * + * @return None + */ +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef *ADCx, uint8_t ADC_Channel) +{ + uint32_t tmpreg = 0; + + tmpreg = ADCx->CTLR1; + tmpreg &= CTLR1_AWDCH_Reset; + tmpreg |= ADC_Channel; + ADCx->CTLR1 = tmpreg; +} + +/********************************************************************* + * @fn ADC_TempSensorVrefintCmd + * + * @brief Enables or disables the temperature sensor and Vrefint channel. + * + * @param NewState - ENABLE or DISABLE. + * + * @return none + */ +void ADC_TempSensorVrefintCmd(FunctionalState NewState) +{ + if(NewState != DISABLE) + { + ADC1->CTLR2 |= CTLR2_TSVREFE_Set; + } + else + { + ADC1->CTLR2 &= CTLR2_TSVREFE_Reset; + } +} + +/********************************************************************* + * @fn ADC_GetFlagStatus + * + * @brief Checks whether the specified ADC flag is set or not. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_FLAG - specifies the flag to check. + * ADC_FLAG_AWD - Analog watchdog flag. + * ADC_FLAG_EOC - End of conversion flag. + * ADC_FLAG_JEOC - End of injected group conversion flag. + * ADC_FLAG_JSTRT - Start of injected group conversion flag. + * ADC_FLAG_STRT - Start of regular group conversion flag. + * + * @return FlagStatus: SET or RESET. + */ +FlagStatus ADC_GetFlagStatus(ADC_TypeDef *ADCx, uint8_t ADC_FLAG) +{ + FlagStatus bitstatus = RESET; + + if((ADCx->STATR & ADC_FLAG) != (uint8_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn ADC_ClearFlag + * + * @brief Clears the ADCx's pending flags. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_FLAG - specifies the flag to clear. + * ADC_FLAG_AWD - Analog watchdog flag. + * ADC_FLAG_EOC - End of conversion flag. + * ADC_FLAG_JEOC - End of injected group conversion flag. + * ADC_FLAG_JSTRT - Start of injected group conversion flag. + * ADC_FLAG_STRT - Start of regular group conversion flag. + * + * @return none + */ +void ADC_ClearFlag(ADC_TypeDef *ADCx, uint8_t ADC_FLAG) +{ + ADCx->STATR = ~(uint32_t)ADC_FLAG; +} + +/********************************************************************* + * @fn ADC_GetITStatus + * + * @brief Checks whether the specified ADC interrupt has occurred or not. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_IT - specifies the ADC interrupt source to check. + * ADC_IT_EOC - End of conversion interrupt mask. + * ADC_IT_AWD - Analog watchdog interrupt mask. + * ADC_IT_JEOC - End of injected conversion interrupt mask. + * + * @return FlagStatus: SET or RESET. + */ +ITStatus ADC_GetITStatus(ADC_TypeDef *ADCx, uint16_t ADC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t itmask = 0, enablestatus = 0; + + itmask = ADC_IT >> 8; + enablestatus = (ADCx->CTLR1 & (uint8_t)ADC_IT); + + if(((ADCx->STATR & itmask) != (uint32_t)RESET) && enablestatus) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn ADC_ClearITPendingBit + * + * @brief Clears the ADCx's interrupt pending bits. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * ADC_IT - specifies the ADC interrupt pending bit to clear. + * ADC_IT_EOC - End of conversion interrupt mask. + * ADC_IT_AWD - Analog watchdog interrupt mask. + * ADC_IT_JEOC - End of injected conversion interrupt mask. + * + * @return none + */ +void ADC_ClearITPendingBit(ADC_TypeDef *ADCx, uint16_t ADC_IT) +{ + uint8_t itmask = 0; + + itmask = (uint8_t)(ADC_IT >> 8); + ADCx->STATR = ~(uint32_t)itmask; +} + +/********************************************************************* + * @fn TempSensor_Volt_To_Temper + * + * @brief Internal Temperature Sensor Voltage to temperature. + * + * @param Value - Voltage Value(mv). + * + * @return Temper - Temperature Value. + */ +s32 TempSensor_Volt_To_Temper(s32 Value) +{ + s32 Temper, Refer_Volt, Refer_Temper; + s32 k = 43; + + Refer_Volt = (s32)((*(u32 *)0x1FFFF720) & 0x0000FFFF); + Refer_Temper = (s32)(((*(u32 *)0x1FFFF720) >> 16) & 0x0000FFFF); + + Temper = Refer_Temper - ((Value - Refer_Volt) * 10 + (k >> 1)) / k; + + return Temper; +} + +/********************************************************************* + * @fn ADC_BufferCmd + * + * @brief Enables or disables the ADCx buffer. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void ADC_BufferCmd(ADC_TypeDef *ADCx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + ADCx->CTLR1 |= (1 << 26); + } + else + { + ADCx->CTLR1 &= ~(1 << 26); + } +} + +/********************************************************************* + * @fn Get_CalibrationValue + * + * @brief Get ADCx Calibration Value. + * + * @param ADCx - where x can be 1 or 2 to select the ADC peripheral. + * + * @return CalibrationValue + */ +int16_t Get_CalibrationValue(ADC_TypeDef *ADCx) +{ + __IO uint8_t i, j; + uint16_t buf[10]; + __IO uint16_t t; +#if defined (CH32V20x_D6) + __IO uint16_t p; +#endif + + for(i = 0; i < 10; i++){ + ADC_ResetCalibration(ADCx); + while(ADC_GetResetCalibrationStatus(ADCx)); + ADC_StartCalibration(ADCx); + while(ADC_GetCalibrationStatus(ADCx)); + buf[i] = ADCx->RDATAR; + } + + for(i = 0; i < 10; i++){ + for(j = 0; j < 9; j++){ + if(buf[j] > buf[j + 1]) + { + t = buf[j]; + buf[j] = buf[j + 1]; + buf[j + 1] = t; + } + } + } + +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + t = 0; + for( i = 0; i < 6; i++ ) { + t += buf[i + 2]; + } + + t = ( t / 6 ) + ( ( t % 6 ) / 3 ); + + return ( int16_t )( 2048 - ( int16_t )t ); +#else + t = 0; + p = 0; + /* 1024 */ + for(i = 0; i < 6; i++ ){ + if(buf[i+2] > 1536) break; + t += buf[i+2]; + } + + if(i > 0){ + t = ( t / i ) + ( (( t % i )*2) / i ); + } + else t = 1024; + + /* 2048 */ + j = 6-i; + if(j > 0){ + for(; i < 6; i++ ){ + p += buf[i+2]; + } + + p = ( p / j ) + ( (( p % j )*2) / j ); + } + else p = 2048; + + return ( int16_t )(((( int16_t )( 1024 - ( int16_t )t ) + ( int16_t )( 2048 - ( int16_t )p ))/2) + ((( int16_t )( 1024 - ( int16_t )t ) + ( int16_t )( 2048 - ( int16_t )p ))%2)); + + +#endif +} diff --git a/gat_stand_fw/periph/src/ch32v20x_bkp.c b/gat_stand_fw/periph/src/ch32v20x_bkp.c new file mode 100644 index 0000000..91ad498 --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_bkp.c @@ -0,0 +1,244 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_bkp.c + * Author : WCH + * Version : V1.0.0 + * Date : 2023/01/06 + * Description : This file provides all the BKP firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_bkp.h" +#include "ch32v20x_rcc.h" + +/* BKP registers bit mask */ + +/* OCTLR register bit mask */ +#define OCTLR_CAL_MASK ((uint16_t)0xFF80) +#define OCTLR_MASK ((uint16_t)0xFC7F) + +/********************************************************************* + * @fn BKP_DeInit + * + * @brief Deinitializes the BKP peripheral registers to their default reset values. + * + * @return none + */ +void BKP_DeInit(void) +{ + RCC_BackupResetCmd(ENABLE); + RCC_BackupResetCmd(DISABLE); +} + +/********************************************************************* + * @fn BKP_TamperPinLevelConfig + * + * @brief Configures the Tamper Pin active level. + * + * @param BKP_TamperPinLevel: specifies the Tamper Pin active level. + * BKP_TamperPinLevel_High - Tamper pin active on high level. + * BKP_TamperPinLevel_Low - Tamper pin active on low level. + * + * @return none + */ +void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel) +{ + if(BKP_TamperPinLevel) + { + BKP->TPCTLR |= (1 << 1); + } + else + { + BKP->TPCTLR &= ~(1 << 1); + } +} + +/********************************************************************* + * @fn BKP_TamperPinCmd + * + * @brief Enables or disables the Tamper Pin activation. + * + * @param NewState - ENABLE or DISABLE. + * + * @return none + */ +void BKP_TamperPinCmd(FunctionalState NewState) +{ + if(NewState) + { + BKP->TPCTLR |= (1 << 0); + } + else + { + BKP->TPCTLR &= ~(1 << 0); + } +} + +/********************************************************************* + * @fn BKP_ITConfig + * + * @brief Enables or disables the Tamper Pin Interrupt. + * + * @param NewState - ENABLE or DISABLE. + * + * @return none + */ +void BKP_ITConfig(FunctionalState NewState) +{ + if(NewState) + { + BKP->TPCSR |= (1 << 2); + } + else + { + BKP->TPCSR &= ~(1 << 2); + } +} + +/********************************************************************* + * @fn BKP_RTCOutputConfig + * + * @brief Select the RTC output source to output on the Tamper pin. + * + * @param BKP_RTCOutputSource - specifies the RTC output source. + * BKP_RTCOutputSource_None - no RTC output on the Tamper pin. + * BKP_RTCOutputSource_CalibClock - output the RTC clock with + * frequency divided by 64 on the Tamper pin. + * BKP_RTCOutputSource_Alarm - output the RTC Alarm pulse signal + * on the Tamper pin. + * BKP_RTCOutputSource_Second - output the RTC Second pulse + * signal on the Tamper pin. + * + * @return none + */ +void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource) +{ + uint16_t tmpreg = 0; + + tmpreg = BKP->OCTLR; + tmpreg &= OCTLR_MASK; + tmpreg |= BKP_RTCOutputSource; + BKP->OCTLR = tmpreg; +} + +/********************************************************************* + * @fn BKP_SetRTCCalibrationValue + * + * @brief Sets RTC Clock Calibration value. + * + * @param CalibrationValue - specifies the RTC Clock Calibration value. + * This parameter must be a number between 0 and 0x7F. + * + * @return none + */ +void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue) +{ + uint16_t tmpreg = 0; + + tmpreg = BKP->OCTLR; + tmpreg &= OCTLR_CAL_MASK; + tmpreg |= CalibrationValue; + BKP->OCTLR = tmpreg; +} + +/********************************************************************* + * @fn BKP_WriteBackupRegister + * + * @brief Writes user data to the specified Data Backup Register. + * + * @param BKP_DR - specifies the Data Backup Register. + * Data - data to write. + * + * @return none + */ +void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + tmp = (uint32_t)BKP_BASE; + tmp += BKP_DR; + *(__IO uint32_t *)tmp = Data; +} + +/********************************************************************* + * @fn BKP_ReadBackupRegister + * + * @brief Reads data from the specified Data Backup Register. + * + * @param BKP_DR - specifies the Data Backup Register. + * This parameter can be BKP_DRx where x=[1, 42]. + * + * @return none + */ +uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR) +{ + __IO uint32_t tmp = 0; + + tmp = (uint32_t)BKP_BASE; + tmp += BKP_DR; + + return (*(__IO uint16_t *)tmp); +} + +/********************************************************************* + * @fn BKP_GetFlagStatus + * + * @brief Checks whether the Tamper Pin Event flag is set or not. + * + * @return FlagStatus - SET or RESET. + */ +FlagStatus BKP_GetFlagStatus(void) +{ + if(BKP->TPCSR & (1 << 8)) + { + return SET; + } + else + { + return RESET; + } +} + +/********************************************************************* + * @fn BKP_ClearFlag + * + * @brief Clears Tamper Pin Event pending flag. + * + * @return none + */ +void BKP_ClearFlag(void) +{ + BKP->TPCSR |= BKP_CTE; +} + +/********************************************************************* + * @fn BKP_GetITStatus + * + * @brief Checks whether the Tamper Pin Interrupt has occurred or not. + * + * @return ITStatus - SET or RESET. + */ +ITStatus BKP_GetITStatus(void) +{ + if(BKP->TPCSR & (1 << 9)) + { + return SET; + } + else + { + return RESET; + } +} + +/********************************************************************* + * @fn BKP_ClearITPendingBit + * + * @brief Clears Tamper Pin Interrupt pending bit. + * + * @return none + */ +void BKP_ClearITPendingBit(void) +{ + BKP->TPCSR |= BKP_CTI; +} diff --git a/gat_stand_fw/periph/src/ch32v20x_can.c b/gat_stand_fw/periph/src/ch32v20x_can.c new file mode 100644 index 0000000..983e93d --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_can.c @@ -0,0 +1,1261 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_can.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the CAN firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_can.h" +#include "ch32v20x_rcc.h" + +/* CAN CTLR Register bits */ +#define CTLR_DBF ((uint32_t)0x00010000) + +/* CAN Mailbox Transmit Request */ +#define TMIDxR_TXRQ ((uint32_t)0x00000001) + +/* CAN FCTLR Register bits */ +#define FCTLR_FINIT ((uint32_t)0x00000001) + +/* Time out for INAK bit */ +#define INAK_TIMEOUT ((uint32_t)0x0000FFFF) +/* Time out for SLAK bit */ +#define SLAK_TIMEOUT ((uint32_t)0x0000FFFF) + + +/* Flags in TSTATR register */ +#define CAN_FLAGS_TSTATR ((uint32_t)0x08000000) +/* Flags in RFIFO1 register */ +#define CAN_FLAGS_RFIFO1 ((uint32_t)0x04000000) +/* Flags in RFIFO0 register */ +#define CAN_FLAGS_RFIFO0 ((uint32_t)0x02000000) +/* Flags in STATR register */ +#define CAN_FLAGS_STATR ((uint32_t)0x01000000) +/* Flags in ERRSR register */ +#define CAN_FLAGS_ERRSR ((uint32_t)0x00F00000) + +/* Mailboxes definition */ +#define CAN_TXMAILBOX_0 ((uint8_t)0x00) +#define CAN_TXMAILBOX_1 ((uint8_t)0x01) +#define CAN_TXMAILBOX_2 ((uint8_t)0x02) + + +#define CAN_MODE_MASK ((uint32_t) 0x00000003) + +static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit); + + +/********************************************************************* + * @fn CAN_DeInit + * + * @brief Deinitializes the CAN peripheral registers to their default reset + * values. + * + * @param CANx - where x can be 1 or 2 to select the CAN peripheral. + * + * @return none + */ +void CAN_DeInit(CAN_TypeDef* CANx) +{ + if (CANx == CAN1) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, DISABLE); + } + else + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, DISABLE); + } +} + +/********************************************************************* + * @fn CAN_Init + * + * @brief Initializes the CAN peripheral according to the specified + * parameters in the CAN_InitStruct. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * CAN_InitStruct - pointer to a CAN_InitTypeDef structure that + * contains the configuration information for the CAN peripheral. + * + * @return InitStatus - CAN InitStatus state. +* CAN_InitStatus_Failed. +* CAN_InitStatus_Success. + */ +uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct) +{ + uint8_t InitStatus = CAN_InitStatus_Failed; + uint32_t wait_ack = 0x00000000; + + CANx->CTLR &= (~(uint32_t)CAN_CTLR_SLEEP); + CANx->CTLR |= CAN_CTLR_INRQ ; + + while (((CANx->STATR & CAN_STATR_INAK) != CAN_STATR_INAK) && (wait_ack != INAK_TIMEOUT)) + { + wait_ack++; + } + + if ((CANx->STATR & CAN_STATR_INAK) != CAN_STATR_INAK) + { + InitStatus = CAN_InitStatus_Failed; + } + else + { + if (CAN_InitStruct->CAN_TTCM == ENABLE) + { + CANx->CTLR |= CAN_CTLR_TTCM; + } + else + { + CANx->CTLR &= ~(uint32_t)CAN_CTLR_TTCM; + } + + if (CAN_InitStruct->CAN_ABOM == ENABLE) + { + CANx->CTLR |= CAN_CTLR_ABOM; + } + else + { + CANx->CTLR &= ~(uint32_t)CAN_CTLR_ABOM; + } + + if (CAN_InitStruct->CAN_AWUM == ENABLE) + { + CANx->CTLR |= CAN_CTLR_AWUM; + } + else + { + CANx->CTLR &= ~(uint32_t)CAN_CTLR_AWUM; + } + + if (CAN_InitStruct->CAN_NART == ENABLE) + { + CANx->CTLR |= CAN_CTLR_NART; + } + else + { + CANx->CTLR &= ~(uint32_t)CAN_CTLR_NART; + } + + if (CAN_InitStruct->CAN_RFLM == ENABLE) + { + CANx->CTLR |= CAN_CTLR_RFLM; + } + else + { + CANx->CTLR &= ~(uint32_t)CAN_CTLR_RFLM; + } + + if (CAN_InitStruct->CAN_TXFP == ENABLE) + { + CANx->CTLR |= CAN_CTLR_TXFP; + } + else + { + CANx->CTLR &= ~(uint32_t)CAN_CTLR_TXFP; + } + + CANx->BTIMR = (uint32_t)((uint32_t)CAN_InitStruct->CAN_Mode << 30) | \ + ((uint32_t)CAN_InitStruct->CAN_SJW << 24) | \ + ((uint32_t)CAN_InitStruct->CAN_BS1 << 16) | \ + ((uint32_t)CAN_InitStruct->CAN_BS2 << 20) | \ + ((uint32_t)CAN_InitStruct->CAN_Prescaler - 1); + CANx->CTLR &= ~(uint32_t)CAN_CTLR_INRQ; + wait_ack = 0; + + while (((CANx->STATR & CAN_STATR_INAK) == CAN_STATR_INAK) && (wait_ack != INAK_TIMEOUT)) + { + wait_ack++; + } + + if ((CANx->STATR & CAN_STATR_INAK) == CAN_STATR_INAK) + { + InitStatus = CAN_InitStatus_Failed; + } + else + { + InitStatus = CAN_InitStatus_Success ; + } + } + + return InitStatus; +} + +/********************************************************************* + * @fn CAN_FilterInit + * + * @brief Initializes the CAN peripheral according to the specified + * parameters in the CAN_FilterInitStruct. + * + * @param CAN_FilterInitStruct - pointer to a CAN_FilterInitTypeDef + * structure that contains the configuration information. + * + * @return none + */ +void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct) +{ + uint32_t filter_number_bit_pos = 0; + + filter_number_bit_pos = ((uint32_t)1) << CAN_FilterInitStruct->CAN_FilterNumber; + CAN1->FCTLR |= FCTLR_FINIT; + CAN1->FWR &= ~(uint32_t)filter_number_bit_pos; + + if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit) + { + CAN1->FSCFGR &= ~(uint32_t)filter_number_bit_pos; + + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); + + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh); + } + + if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit) + { + CAN1->FSCFGR |= filter_number_bit_pos; + + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); + + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow); + } + +#if defined (CH32V20x_D6) + if(((*(uint32_t *) 0x40022030) & 0x0F000000) == 0) + { + uint32_t i; + + for(i = 0; i < 64; i++) + { + *(__IO uint16_t *)(0x40006000 + 512 + 4 * i) = *(__IO uint16_t *)(0x40006000 + 768 + 4 * i); + } + } + +#endif + + +#if defined (CH32V20x_D8) + RCC->AHBPCENR |= (1<<17); + *(vu32*)0x400250A0 = 0x55aaaa55; + + if(*(vu32*)0x400250A0 != 0x55aaaa55) + { + uint32_t i; + + for(i = 0; i < 64; i++) + { + *(__IO uint16_t *)(0x40006000 + 512 + 4 * i) = *(__IO uint16_t *)(0x40006000 + 768 + 4 * i); + } + } + + RCC->AHBPCENR &= ~(1<<17); + +#endif + + + + if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask) + { + CAN1->FMCFGR &= ~(uint32_t)filter_number_bit_pos; + } + else + { + CAN1->FMCFGR |= (uint32_t)filter_number_bit_pos; + } + + if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO0) + { + CAN1->FAFIFOR &= ~(uint32_t)filter_number_bit_pos; + } + + if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO1) + { + CAN1->FAFIFOR |= (uint32_t)filter_number_bit_pos; + } + + if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE) + { + CAN1->FWR |= filter_number_bit_pos; + } + + CAN1->FCTLR &= ~FCTLR_FINIT; +} + +/********************************************************************* + * @fn CAN_StructInit + * + * @brief Fills each CAN_InitStruct member with its default value. + * + * @param CAN_InitStruct - pointer to a CAN_InitTypeDef structure which + * will be initialized. + * + * @return none + */ +void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct) +{ + CAN_InitStruct->CAN_TTCM = DISABLE; + CAN_InitStruct->CAN_ABOM = DISABLE; + CAN_InitStruct->CAN_AWUM = DISABLE; + CAN_InitStruct->CAN_NART = DISABLE; + CAN_InitStruct->CAN_RFLM = DISABLE; + CAN_InitStruct->CAN_TXFP = DISABLE; + CAN_InitStruct->CAN_Mode = CAN_Mode_Normal; + CAN_InitStruct->CAN_SJW = CAN_SJW_1tq; + CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq; + CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq; + CAN_InitStruct->CAN_Prescaler = 1; +} + +/********************************************************************* + * @fn CAN_SlaveStartBank + * + * @brief This function applies only to CH32 Connectivity line devices. + * + * @param CAN_BankNumber - Select the start slave bank filter from 1..27. + * + * @return none + */ +void CAN_SlaveStartBank(uint8_t CAN_BankNumber) +{ + CAN1->FCTLR |= FCTLR_FINIT; + CAN1->FCTLR &= (uint32_t)0xFFFFC0F1 ; + CAN1->FCTLR |= (uint32_t)(CAN_BankNumber)<<8; + CAN1->FCTLR &= ~FCTLR_FINIT; +} + +/********************************************************************* + * @fn CAN_DBGFreeze + * + * @brief Enables or disables the DBG Freeze for CAN. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState) +{ + if (NewState != DISABLE) + { + CANx->CTLR |= CTLR_DBF; + } + else + { + CANx->CTLR &= ~CTLR_DBF; + } +} + +/********************************************************************* + * @fn CAN_TTComModeCmd + * + * @brief Enables or disabes the CAN Time TriggerOperation communication mode. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * NewState - ENABLE or DISABLE. + * Note- + * DLC must be programmed as 8 in order Time Stamp (2 bytes) to be + * sent over the CAN bus. + * + * @return none + */ +void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState) +{ + if (NewState != DISABLE) + { + CANx->CTLR |= CAN_CTLR_TTCM; + + CANx->sTxMailBox[0].TXMDTR |= ((uint32_t)CAN_TXMDT0R_TGT); + CANx->sTxMailBox[1].TXMDTR |= ((uint32_t)CAN_TXMDT1R_TGT); + CANx->sTxMailBox[2].TXMDTR |= ((uint32_t)CAN_TXMDT2R_TGT); + } + else + { + CANx->CTLR &= (uint32_t)(~(uint32_t)CAN_CTLR_TTCM); + + CANx->sTxMailBox[0].TXMDTR &= ((uint32_t)~CAN_TXMDT0R_TGT); + CANx->sTxMailBox[1].TXMDTR &= ((uint32_t)~CAN_TXMDT1R_TGT); + CANx->sTxMailBox[2].TXMDTR &= ((uint32_t)~CAN_TXMDT2R_TGT); + } +} + +/********************************************************************* + * @fn CAN_Transmit + * + * @brief Initiates the transmission of a message. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * TxMessage - pointer to a structure which contains CAN Id, CAN + * DLC and CAN data. + * + * @return transmit_mailbox - The number of the mailbox that is used for + * transmission or CAN_TxStatus_NoMailBox if there is no empty mailbox. + */ +uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage) +{ + uint8_t transmit_mailbox = 0; + + if ((CANx->TSTATR&CAN_TSTATR_TME0) == CAN_TSTATR_TME0) + { + transmit_mailbox = 0; + } + else if ((CANx->TSTATR&CAN_TSTATR_TME1) == CAN_TSTATR_TME1) + { + transmit_mailbox = 1; + } + else if ((CANx->TSTATR&CAN_TSTATR_TME2) == CAN_TSTATR_TME2) + { + transmit_mailbox = 2; + } + else + { + transmit_mailbox = CAN_TxStatus_NoMailBox; + } + + if (transmit_mailbox != CAN_TxStatus_NoMailBox) + { + CANx->sTxMailBox[transmit_mailbox].TXMIR &= TMIDxR_TXRQ; + if (TxMessage->IDE == CAN_Id_Standard) + { + CANx->sTxMailBox[transmit_mailbox].TXMIR |= ((TxMessage->StdId << 21) | \ + TxMessage->RTR); + } + else + { + CANx->sTxMailBox[transmit_mailbox].TXMIR |= ((TxMessage->ExtId << 3) | \ + TxMessage->IDE | \ + TxMessage->RTR); + } + + TxMessage->DLC &= (uint8_t)0x0000000F; + CANx->sTxMailBox[transmit_mailbox].TXMDTR &= (uint32_t)0xFFFFFFF0; + CANx->sTxMailBox[transmit_mailbox].TXMDTR |= TxMessage->DLC; + + CANx->sTxMailBox[transmit_mailbox].TXMDLR = (((uint32_t)TxMessage->Data[3] << 24) | + ((uint32_t)TxMessage->Data[2] << 16) | + ((uint32_t)TxMessage->Data[1] << 8) | + ((uint32_t)TxMessage->Data[0])); + CANx->sTxMailBox[transmit_mailbox].TXMDHR = (((uint32_t)TxMessage->Data[7] << 24) | + ((uint32_t)TxMessage->Data[6] << 16) | + ((uint32_t)TxMessage->Data[5] << 8) | + ((uint32_t)TxMessage->Data[4])); + CANx->sTxMailBox[transmit_mailbox].TXMIR |= TMIDxR_TXRQ; + } + + return transmit_mailbox; +} + +/********************************************************************* + * @fn CAN_TransmitStatus + * + * @brief Checks the transmission of a message. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * TransmitMailbox - the number of the mailbox that is used for + * transmission. + * + * @return state - + * CAN_TxStatus_Ok. + * CAN_TxStatus_Failed. + */ +uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox) +{ + uint32_t state = 0; + + switch (TransmitMailbox) + { + case (CAN_TXMAILBOX_0): + state = CANx->TSTATR & (CAN_TSTATR_RQCP0 | CAN_TSTATR_TXOK0 | CAN_TSTATR_TME0); + break; + + case (CAN_TXMAILBOX_1): + state = CANx->TSTATR & (CAN_TSTATR_RQCP1 | CAN_TSTATR_TXOK1 | CAN_TSTATR_TME1); + break; + + case (CAN_TXMAILBOX_2): + state = CANx->TSTATR & (CAN_TSTATR_RQCP2 | CAN_TSTATR_TXOK2 | CAN_TSTATR_TME2); + break; + + default: + state = CAN_TxStatus_Failed; + break; + } + + switch (state) + { + case (0x0): + state = CAN_TxStatus_Pending; + break; + + case (CAN_TSTATR_RQCP0 | CAN_TSTATR_TME0): + state = CAN_TxStatus_Failed; + break; + + case (CAN_TSTATR_RQCP1 | CAN_TSTATR_TME1): + state = CAN_TxStatus_Failed; + break; + + case (CAN_TSTATR_RQCP2 | CAN_TSTATR_TME2): + state = CAN_TxStatus_Failed; + break; + + case (CAN_TSTATR_RQCP0 | CAN_TSTATR_TXOK0 | CAN_TSTATR_TME0): + state = CAN_TxStatus_Ok; + break; + + case (CAN_TSTATR_RQCP1 | CAN_TSTATR_TXOK1 | CAN_TSTATR_TME1): + state = CAN_TxStatus_Ok; + break; + + case (CAN_TSTATR_RQCP2 | CAN_TSTATR_TXOK2 | CAN_TSTATR_TME2): + state = CAN_TxStatus_Ok; + break; + + default: + state = CAN_TxStatus_Failed; + break; + } + + return (uint8_t) state; +} + +/********************************************************************* + * @fn CAN_CancelTransmit + * + * @brief Cancels a transmit request. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * Mailbox - Mailbox number. + * CAN_TXMAILBOX_0. + * CAN_TXMAILBOX_1. + * CAN_TXMAILBOX_2. + * + * @return none + */ +void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox) +{ + switch (Mailbox) + { + case (CAN_TXMAILBOX_0): + CANx->TSTATR |= CAN_TSTATR_ABRQ0; + break; + + case (CAN_TXMAILBOX_1): + CANx->TSTATR |= CAN_TSTATR_ABRQ1; + break; + + case (CAN_TXMAILBOX_2): + CANx->TSTATR |= CAN_TSTATR_ABRQ2; + break; + + default: + break; + } +} + +/********************************************************************* + * @fn CAN_Receive + * + * @brief Receives a message. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * FIFONumber - Receive FIFO number. + * CAN_FIFO0. + * CAN_FIFO1. + * RxMessage - pointer to a structure receive message which contains + * CAN Id, CAN DLC, CAN datas and FMI number. + * + * @return none + */ +void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage) +{ + RxMessage->IDE = (uint8_t)0x04 & CANx->sFIFOMailBox[FIFONumber].RXMIR; + + if (RxMessage->IDE == CAN_Id_Standard) + { + RxMessage->StdId = (uint32_t)0x000007FF & (CANx->sFIFOMailBox[FIFONumber].RXMIR >> 21); + } + else + { + RxMessage->ExtId = (uint32_t)0x1FFFFFFF & (CANx->sFIFOMailBox[FIFONumber].RXMIR >> 3); + } + + RxMessage->RTR = (uint8_t)0x02 & CANx->sFIFOMailBox[FIFONumber].RXMIR; + RxMessage->DLC = (uint8_t)0x0F & CANx->sFIFOMailBox[FIFONumber].RXMDTR; + RxMessage->FMI = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RXMDTR >> 8); + RxMessage->Data[0] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RXMDLR; + RxMessage->Data[1] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RXMDLR >> 8); + RxMessage->Data[2] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RXMDLR >> 16); + RxMessage->Data[3] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RXMDLR >> 24); + RxMessage->Data[4] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RXMDHR; + RxMessage->Data[5] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RXMDHR >> 8); + RxMessage->Data[6] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RXMDHR >> 16); + RxMessage->Data[7] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RXMDHR >> 24); + + if (FIFONumber == CAN_FIFO0) + { + CANx->RFIFO0 |= CAN_RFIFO0_RFOM0; + } + else + { + CANx->RFIFO1 |= CAN_RFIFO1_RFOM1; + } +} + +/********************************************************************* + * @fn CAN_FIFORelease + * + * @brief Releases the specified FIFO. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * FIFONumber - Receive FIFO number. + * CAN_FIFO0. + * CAN_FIFO1. + * + * @return none + */ +void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber) +{ + if (FIFONumber == CAN_FIFO0) + { + CANx->RFIFO0 |= CAN_RFIFO0_RFOM0; + } + else + { + CANx->RFIFO1 |= CAN_RFIFO1_RFOM1; + } +} + +/********************************************************************* + * @fn CAN_MessagePending + * + * @brief Returns the number of pending messages. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * FIFONumber - Receive FIFO number. + * CAN_FIFO0. + * CAN_FIFO1. + * + * @return message_pending: which is the number of pending message. + */ +uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber) +{ + uint8_t message_pending=0; + + if (FIFONumber == CAN_FIFO0) + { + message_pending = (uint8_t)(CANx->RFIFO0&(uint32_t)0x03); + } + else if (FIFONumber == CAN_FIFO1) + { + message_pending = (uint8_t)(CANx->RFIFO1&(uint32_t)0x03); + } + else + { + message_pending = 0; + } + + return message_pending; +} + +/********************************************************************* + * @fn CAN_OperatingModeRequest + * + * @brief Select the CAN Operation mode. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * CAN_OperatingMode - CAN Operating Mode. + * CAN_OperatingMode_Initialization. + * CAN_OperatingMode_Normal. + * CAN_OperatingMode_Sleep. + * + * @return status - + * CAN_ModeStatus_Failed - CAN failed entering the specific mode. + * CAN_ModeStatus_Success - CAN Succeed entering the specific mode. + */ +uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode) +{ + uint8_t status = CAN_ModeStatus_Failed; + uint32_t timeout = INAK_TIMEOUT; + + if (CAN_OperatingMode == CAN_OperatingMode_Initialization) + { + CANx->CTLR = (uint32_t)((CANx->CTLR & (uint32_t)(~(uint32_t)CAN_CTLR_SLEEP)) | CAN_CTLR_INRQ); + + while (((CANx->STATR & CAN_MODE_MASK) != CAN_STATR_INAK) && (timeout != 0)) + { + timeout--; + } + if ((CANx->STATR & CAN_MODE_MASK) != CAN_STATR_INAK) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else if (CAN_OperatingMode == CAN_OperatingMode_Normal) + { + CANx->CTLR &= (uint32_t)(~(CAN_CTLR_SLEEP|CAN_CTLR_INRQ)); + + while (((CANx->STATR & CAN_MODE_MASK) != 0) && (timeout!=0)) + { + timeout--; + } + if ((CANx->STATR & CAN_MODE_MASK) != 0) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else if (CAN_OperatingMode == CAN_OperatingMode_Sleep) + { + CANx->CTLR = (uint32_t)((CANx->CTLR & (uint32_t)(~(uint32_t)CAN_CTLR_INRQ)) | CAN_CTLR_SLEEP); + + while (((CANx->STATR & CAN_MODE_MASK) != CAN_STATR_SLAK) && (timeout!=0)) + { + timeout--; + } + if ((CANx->STATR & CAN_MODE_MASK) != CAN_STATR_SLAK) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else + { + status = CAN_ModeStatus_Failed; + } + + return (uint8_t) status; +} + +/********************************************************************* + * @fn CAN_Sleep + * + * @brief Enters the low power mode. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * + * @return sleepstatus - + * CAN_Sleep_Ok. + * CAN_Sleep_Failed. + */ +uint8_t CAN_Sleep(CAN_TypeDef* CANx) +{ + uint8_t sleepstatus = CAN_Sleep_Failed; + + CANx->CTLR = (((CANx->CTLR) & (uint32_t)(~(uint32_t)CAN_CTLR_INRQ)) | CAN_CTLR_SLEEP); + + if ((CANx->STATR & (CAN_STATR_SLAK|CAN_STATR_INAK)) == CAN_STATR_SLAK) + { + sleepstatus = CAN_Sleep_Ok; + } + + return (uint8_t)sleepstatus; +} + +/********************************************************************* + * @fn CAN_WakeUp + * + * @brief Wakes the CAN up. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * + * @return wakeupstatus - + * CAN_WakeUp_Ok. + * CAN_WakeUp_Failed. + */ +uint8_t CAN_WakeUp(CAN_TypeDef* CANx) +{ + uint32_t wait_slak = SLAK_TIMEOUT; + uint8_t wakeupstatus = CAN_WakeUp_Failed; + + CANx->CTLR &= ~(uint32_t)CAN_CTLR_SLEEP; + + while(((CANx->STATR & CAN_STATR_SLAK) == CAN_STATR_SLAK)&&(wait_slak!=0x00)) + { + wait_slak--; + } + if((CANx->STATR & CAN_STATR_SLAK) != CAN_STATR_SLAK) + { + wakeupstatus = CAN_WakeUp_Ok; + } + + return (uint8_t)wakeupstatus; +} + +/********************************************************************* + * @fn CAN_GetLastErrorCode + * + * @brief Returns the CANx's last error code (LEC). + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * + * @return errorcode - specifies the Error code. + * CAN_ErrorCode_NoErr - No Error. + * CAN_ErrorCode_StuffErr - Stuff Error. + * CAN_ErrorCode_FormErr - Form Error. + * CAN_ErrorCode_ACKErr - Acknowledgment Error. + * CAN_ErrorCode_BitRecessiveErr - Bit Recessive Error. + * CAN_ErrorCode_BitDominantErr - Bit Dominant Error. + * CAN_ErrorCode_CRCErr - CRC Error. + * CAN_ErrorCode_SoftwareSetErr - Software Set Error. + */ +uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx) +{ + uint8_t errorcode=0; + + errorcode = (((uint8_t)CANx->ERRSR) & (uint8_t)CAN_ERRSR_LEC); + + return errorcode; +} + +/********************************************************************* + * @fn CAN_GetReceiveErrorCounter + * + * @brief Returns the CANx Receive Error Counter (REC). + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * Note- + * In case of an error during reception, this counter is incremented + * by 1 or by 8 depending on the error condition as defined by the CAN + * standard. After every successful reception, the counter is + * decremented by 1 or reset to 120 if its value was higher than 128. + * When the counter value exceeds 127, the CAN controller enters the + * error passive state. + * @return counter - CAN Receive Error Counter. + */ +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx) +{ + uint8_t counter=0; + + counter = (uint8_t)((CANx->ERRSR & CAN_ERRSR_REC)>> 24); + + return counter; +} + +/********************************************************************* + * @fn CAN_GetLSBTransmitErrorCounter + * + * @brief Returns the LSB of the 9-bit CANx Transmit Error Counter(TEC). + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * + * @return counter - LSB of the 9-bit CAN Transmit Error Counter. + */ +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx) +{ + uint8_t counter=0; + + counter = (uint8_t)((CANx->ERRSR & CAN_ERRSR_TEC)>> 16); + + return counter; +} + +/********************************************************************* + * @fn CAN_ITConfig + * + * @brief Enables or disables the specified CANx interrupts. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * CAN_IT - specifies the CAN interrupt sources to be enabled or disabled. + * CAN_IT_TME. + * CAN_IT_FMP0. + * CAN_IT_FF0. + * CAN_IT_FOV0. + * CAN_IT_FMP1. + * CAN_IT_FF1. + * CAN_IT_FOV1. + * CAN_IT_EWG. + * CAN_IT_EPV. + * CAN_IT_LEC. + * CAN_IT_ERR. + * CAN_IT_WKU. + * CAN_IT_SLK. + * NewState - ENABLE or DISABLE. + * + * @return counter - LSB of the 9-bit CAN Transmit Error Counter. + */ +void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState) +{ + if (NewState != DISABLE) + { + CANx->INTENR |= CAN_IT; + } + else + { + CANx->INTENR &= ~CAN_IT; + } +} + +/********************************************************************* + * @fn CAN_GetFlagStatus + * + * @brief Checks whether the specified CAN flag is set or not. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * CAN_FLAG - specifies the flag to check. + * CAN_FLAG_EWG. + * CAN_FLAG_EPV. + * CAN_FLAG_BOF. + * CAN_FLAG_RQCP0. + * CAN_FLAG_RQCP1. + * CAN_FLAG_RQCP2. + * CAN_FLAG_FMP1. + * CAN_FLAG_FF1. + * CAN_FLAG_FOV1. + * CAN_FLAG_FMP0. + * CAN_FLAG_FF0. + * CAN_FLAG_FOV0. + * CAN_FLAG_WKU. + * CAN_FLAG_SLAK. + * CAN_FLAG_LEC. + * NewState - ENABLE or DISABLE. + * + * @return FlagStatus - SET or RESET. + */ +FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG) +{ + FlagStatus bitstatus = RESET; + + if((CAN_FLAG & CAN_FLAGS_ERRSR) != (uint32_t)RESET) + { + if ((CANx->ERRSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_STATR) != (uint32_t)RESET) + { + if ((CANx->STATR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_TSTATR) != (uint32_t)RESET) + { + if ((CANx->TSTATR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_RFIFO0) != (uint32_t)RESET) + { + if ((CANx->RFIFO0 & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if ((uint32_t)(CANx->RFIFO1 & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + + return bitstatus; +} + +/********************************************************************* + * @fn CAN_ClearFlag + * + * @brief Clears the CAN's pending flags. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * CAN_FLAG - specifies the flag to clear. + * CAN_FLAG_RQCP0. + * CAN_FLAG_RQCP1. + * CAN_FLAG_RQCP2. + * CAN_FLAG_FF1. + * CAN_FLAG_FOV1. + * CAN_FLAG_FF0. + * CAN_FLAG_FOV0. + * CAN_FLAG_WKU. + * CAN_FLAG_SLAK. + * CAN_FLAG_LEC. + * + * @return none + */ +void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG) +{ + uint32_t flagtmp=0; + + if (CAN_FLAG == CAN_FLAG_LEC) + { + CANx->ERRSR = (uint32_t)RESET; + } + else + { + flagtmp = CAN_FLAG & 0x000FFFFF; + + if ((CAN_FLAG & CAN_FLAGS_RFIFO0)!=(uint32_t)RESET) + { + CANx->RFIFO0 = (uint32_t)(flagtmp); + } + else if ((CAN_FLAG & CAN_FLAGS_RFIFO1)!=(uint32_t)RESET) + { + CANx->RFIFO1 = (uint32_t)(flagtmp); + } + else if ((CAN_FLAG & CAN_FLAGS_TSTATR)!=(uint32_t)RESET) + { + CANx->TSTATR = (uint32_t)(flagtmp); + } + else + { + CANx->STATR = (uint32_t)(flagtmp); + } + } +} + +/********************************************************************* + * @fn CAN_GetITStatus + * + * @brief Checks whether the specified CANx interrupt has occurred or not. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * CAN_IT - specifies the CAN interrupt source to check. + * CAN_IT_TME. + * CAN_IT_FMP0. + * CAN_IT_FF0. + * CAN_IT_FOV0. + * CAN_IT_FMP1. + * CAN_IT_FF1. + * CAN_IT_FOV1. + * CAN_IT_WKU. + * CAN_IT_SLK. + * CAN_IT_EWG. + * CAN_IT_EPV. + * CAN_IT_BOF. + * CAN_IT_LEC. + * CAN_IT_ERR. + * + * @return ITStatus - SET or RESET. + */ +ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT) +{ + ITStatus itstatus = RESET; + + if((CANx->INTENR & CAN_IT) != RESET) + { + switch (CAN_IT) + { + case CAN_IT_TME: + itstatus = CheckITStatus(CANx->TSTATR, CAN_TSTATR_RQCP0|CAN_TSTATR_RQCP1|CAN_TSTATR_RQCP2); + break; + + case CAN_IT_FMP0: + itstatus = CheckITStatus(CANx->RFIFO0, CAN_RFIFO0_FMP0); + break; + + case CAN_IT_FF0: + itstatus = CheckITStatus(CANx->RFIFO0, CAN_RFIFO0_FULL0); + break; + + case CAN_IT_FOV0: + itstatus = CheckITStatus(CANx->RFIFO0, CAN_RFIFO0_FOVR0); + break; + + case CAN_IT_FMP1: + itstatus = CheckITStatus(CANx->RFIFO1, CAN_RFIFO1_FMP1); + break; + + case CAN_IT_FF1: + itstatus = CheckITStatus(CANx->RFIFO1, CAN_RFIFO1_FULL1); + break; + + case CAN_IT_FOV1: + itstatus = CheckITStatus(CANx->RFIFO1, CAN_RFIFO1_FOVR1); + break; + + case CAN_IT_WKU: + itstatus = CheckITStatus(CANx->STATR, CAN_STATR_WKUI); + break; + + case CAN_IT_SLK: + itstatus = CheckITStatus(CANx->STATR, CAN_STATR_SLAKI); + break; + + case CAN_IT_EWG: + itstatus = CheckITStatus(CANx->ERRSR, CAN_ERRSR_EWGF); + break; + + case CAN_IT_EPV: + itstatus = CheckITStatus(CANx->ERRSR, CAN_ERRSR_EPVF); + break; + + case CAN_IT_BOF: + itstatus = CheckITStatus(CANx->ERRSR, CAN_ERRSR_BOFF); + break; + + case CAN_IT_LEC: + itstatus = CheckITStatus(CANx->ERRSR, CAN_ERRSR_LEC); + break; + + case CAN_IT_ERR: + itstatus = CheckITStatus(CANx->STATR, CAN_STATR_ERRI); + break; + + default : + itstatus = RESET; + break; + } + } + else + { + itstatus = RESET; + } + + return itstatus; +} + +/********************************************************************* + * @fn CAN_ClearITPendingBit + * + * @brief Clears the CANx's interrupt pending bits. + * + * @param CANx - where x can be 1 to select the CAN peripheral. + * CAN_IT - specifies the interrupt pending bit to clear. + * CAN_IT_TME. + * CAN_IT_FF0. + * CAN_IT_FOV0. + * CAN_IT_FF1. + * CAN_IT_FOV1. + * CAN_IT_WKU. + * CAN_IT_SLK. + * CAN_IT_EWG. + * CAN_IT_EPV. + * CAN_IT_BOF. + * CAN_IT_LEC. + * CAN_IT_ERR. + * + * @return none + */ +void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT) +{ + switch (CAN_IT) + { + case CAN_IT_TME: + CANx->TSTATR = CAN_TSTATR_RQCP0|CAN_TSTATR_RQCP1|CAN_TSTATR_RQCP2; + break; + + case CAN_IT_FF0: + CANx->RFIFO0 = CAN_RFIFO0_FULL0; + break; + + case CAN_IT_FOV0: + CANx->RFIFO0 = CAN_RFIFO0_FOVR0; + break; + + case CAN_IT_FF1: + CANx->RFIFO1 = CAN_RFIFO1_FULL1; + break; + + case CAN_IT_FOV1: + CANx->RFIFO1 = CAN_RFIFO1_FOVR1; + break; + + case CAN_IT_WKU: + CANx->STATR = CAN_STATR_WKUI; + break; + + case CAN_IT_SLK: + CANx->STATR = CAN_STATR_SLAKI; + break; + + case CAN_IT_EWG: + CANx->STATR = CAN_STATR_ERRI; + break; + + case CAN_IT_EPV: + CANx->STATR = CAN_STATR_ERRI; + break; + + case CAN_IT_BOF: + CANx->STATR = CAN_STATR_ERRI; + break; + + case CAN_IT_LEC: + CANx->ERRSR = RESET; + CANx->STATR = CAN_STATR_ERRI; + break; + + case CAN_IT_ERR: + CANx->ERRSR = RESET; + CANx->STATR = CAN_STATR_ERRI; + break; + + default : + break; + } +} + +/********************************************************************* + * @fn CheckITStatus + * + * @brief Checks whether the CAN interrupt has occurred or not. + * + * @param CAN_Reg - specifies the CAN interrupt register to check + * It_Bit - specifies the interrupt source bit to check. + * + * @return ITStatus - SET or RESET. + */ +static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit) +{ + ITStatus pendingbitstatus = RESET; + + if ((CAN_Reg & It_Bit) != (uint32_t)RESET) + { + pendingbitstatus = SET; + } + else + { + pendingbitstatus = RESET; + } + + return pendingbitstatus; +} + + + + + + diff --git a/gat_stand_fw/periph/src/ch32v20x_crc.c b/gat_stand_fw/periph/src/ch32v20x_crc.c new file mode 100644 index 0000000..9119710 --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_crc.c @@ -0,0 +1,99 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_crc.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the CRC firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_crc.h" + +/********************************************************************* + * @fn CRC_ResetDR + * + * @brief Resets the CRC Data register (DR). + * + * @return none + */ +void CRC_ResetDR(void) +{ + CRC->CTLR = CRC_CTLR_RESET; +} + +/********************************************************************* + * @fn CRC_CalcCRC + * + * @brief Computes the 32-bit CRC of a given data word(32-bit). + * + * @param Data - data word(32-bit) to compute its CRC. + * + * @return 32-bit CRC. + */ +uint32_t CRC_CalcCRC(uint32_t Data) +{ + CRC->DATAR = Data; + + return (CRC->DATAR); +} + +/********************************************************************* + * @fn CRC_CalcBlockCRC + * + * @brief Computes the 32-bit CRC of a given buffer of data word(32-bit). + * + * @param pBuffer - pointer to the buffer containing the data to be computed. + * BufferLength - length of the buffer to be computed. + * + * @return 32-bit CRC. + */ +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index = 0; + + for(index = 0; index < BufferLength; index++){ + CRC->DATAR = pBuffer[index]; + } + + return (CRC->DATAR); +} + +/********************************************************************* + * @fn CRC_GetCRC + * + * @brief Returns the current CRC value. + * + * @return 32-bit CRC. + */ +uint32_t CRC_GetCRC(void) +{ + return (CRC->DATAR); +} + +/********************************************************************* + * @fn CRC_SetIDRegister + * + * @brief Stores a 8-bit data in the Independent Data(ID) register. + * + * @param IDValue - 8-bit value to be stored in the ID register. + * + * @return none + */ +void CRC_SetIDRegister(uint8_t IDValue) +{ + CRC->IDATAR = IDValue; +} + +/********************************************************************* + * @fn CRC_GetIDRegister + * + * @brief Returns the 8-bit data stored in the Independent Data(ID) register. + * + * @return 8-bit value of the ID register. + */ +uint8_t CRC_GetIDRegister(void) +{ + return (CRC->IDATAR); +} diff --git a/gat_stand_fw/periph/src/ch32v20x_dbgmcu.c b/gat_stand_fw/periph/src/ch32v20x_dbgmcu.c new file mode 100644 index 0000000..13f08d7 --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_dbgmcu.c @@ -0,0 +1,127 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_dbgmcu.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the DBGMCU firmware functions. + ********************************************************************************* + * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. + * Attention: This software (modified or not) and binary are used for + * microcontroller manufactured by Nanjing Qinheng Microelectronics. + *******************************************************************************/ +#include "ch32v20x_dbgmcu.h" + +#define IDCODE_DEVID_MASK ((uint32_t)0x0000FFFF) + +/********************************************************************* + * @fn DBGMCU_GetREVID + * + * @brief Returns the device revision identifier. + * + * @return Revision identifier. + */ +uint32_t DBGMCU_GetREVID(void) +{ + return ((*(uint32_t *)0x1FFFF704) >> 16); +} + +/********************************************************************* + * @fn DBGMCU_GetDEVID + * + * @brief Returns the device identifier. + * + * @return Device identifier. + */ +uint32_t DBGMCU_GetDEVID(void) +{ + return ((*(uint32_t *)0x1FFFF704) & IDCODE_DEVID_MASK); +} + +/********************************************************************* + * @fn __get_DEBUG_CR + * + * @brief Return the DEBUGE Control Register + * + * @return DEBUGE Control value + */ +uint32_t __get_DEBUG_CR(void) +{ + uint32_t result; + + __asm volatile("csrr %0,""0x7C0" : "=r"(result)); + return (result); +} + +/********************************************************************* + * @fn __set_DEBUG_CR + * + * @brief Set the DEBUGE Control Register + * + * @param value - set DEBUGE Control value + * + * @return none + */ +void __set_DEBUG_CR(uint32_t value) +{ + __asm volatile("csrw 0x7C0, %0" : : "r"(value)); +} + + +/********************************************************************* + * @fn DBGMCU_Config + * + * @brief Configures the specified peripheral and low power mode behavior + * when the MCU under Debug mode. + * + * @param DBGMCU_Periph - specifies the peripheral and low power mode. + * DBGMCU_IWDG_STOP - Debug IWDG stopped when Core is halted + * DBGMCU_WWDG_STOP - Debug WWDG stopped when Core is halted + * DBGMCU_TIM1_STOP - TIM1 counter stopped when Core is halted + * DBGMCU_TIM2_STOP - TIM2 counter stopped when Core is halted + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + uint32_t val; + + if(NewState != DISABLE) + { + __set_DEBUG_CR(DBGMCU_Periph); + } + else + { + val = __get_DEBUG_CR(); + val &= ~(uint32_t)DBGMCU_Periph; + __set_DEBUG_CR(val); + } + +} +/********************************************************************* + * @fn DBGMCU_GetCHIPID + * + * @brief Returns the CHIP identifier. + * + * @return Device identifier. + * ChipID List- + * CH32V203C8U6-0x203005x0 + * CH32V203C8T6-0x203105x0 + * CH32V203K8T6-0x203205x0 + * CH32V203C6T6-0x203305x0 + * CH32V203K6T6-0x203505x0 + * CH32V203G6U6-0x203605x0 + * CH32V203G8R6-0x203B05x0 + * CH32V203F8U6-0x203E05x0 + * CH32V203F6P6-0x203705x0-0x203905x0 + * CH32V203F8P6-0x203A05x0 + * CH32V203RBT6-0x203405xC + * CH32V208WBU6-0x208005xC + * CH32V208RBT6-0x208105xC + * CH32V208CBU6-0x208205xC + * CH32V208GBU6-0x208305xC + */ +uint32_t DBGMCU_GetCHIPID( void ) +{ + return( *( uint32_t * )0x1FFFF704 ); +} diff --git a/gat_stand_fw/periph/src/ch32v20x_dma.c b/gat_stand_fw/periph/src/ch32v20x_dma.c new file mode 100644 index 0000000..8aa8dc1 --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_dma.c @@ -0,0 +1,432 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_dma.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the DMA firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_dma.h" +#include "ch32v20x_rcc.h" + +/* DMA1 Channelx interrupt pending bit masks */ +#define DMA1_Channel1_IT_Mask ((uint32_t)(DMA_GIF1 | DMA_TCIF1 | DMA_HTIF1 | DMA_TEIF1)) +#define DMA1_Channel2_IT_Mask ((uint32_t)(DMA_GIF2 | DMA_TCIF2 | DMA_HTIF2 | DMA_TEIF2)) +#define DMA1_Channel3_IT_Mask ((uint32_t)(DMA_GIF3 | DMA_TCIF3 | DMA_HTIF3 | DMA_TEIF3)) +#define DMA1_Channel4_IT_Mask ((uint32_t)(DMA_GIF4 | DMA_TCIF4 | DMA_HTIF4 | DMA_TEIF4)) +#define DMA1_Channel5_IT_Mask ((uint32_t)(DMA_GIF5 | DMA_TCIF5 | DMA_HTIF5 | DMA_TEIF5)) +#define DMA1_Channel6_IT_Mask ((uint32_t)(DMA_GIF6 | DMA_TCIF6 | DMA_HTIF6 | DMA_TEIF6)) +#define DMA1_Channel7_IT_Mask ((uint32_t)(DMA_GIF7 | DMA_TCIF7 | DMA_HTIF7 | DMA_TEIF7)) +#define DMA1_Channel8_IT_Mask ((uint32_t)(DMA_GIF8 | DMA_TCIF8 | DMA_HTIF8 | DMA_TEIF8)) + +/* DMA2 FLAG mask */ +#define FLAG_Mask ((uint32_t)0x10000000) + +/* DMA registers Masks */ +#define CFGR_CLEAR_Mask ((uint32_t)0xFFFF800F) + +/********************************************************************* + * @fn DMA_DeInit + * + * @brief Deinitializes the DMAy Channelx registers to their default + * reset values. + * + * @param DMAy_Channelx - here y can be 1 or 2 to select the DMA and x can be + * 1 to 7 for DMA1 and 1 to 11 for DMA2 to select the DMA Channel. + * + * @return none + */ +void DMA_DeInit(DMA_Channel_TypeDef *DMAy_Channelx) +{ + DMAy_Channelx->CFGR &= (uint16_t)(~DMA_CFGR1_EN); + DMAy_Channelx->CFGR = 0; + DMAy_Channelx->CNTR = 0; + DMAy_Channelx->PADDR = 0; + DMAy_Channelx->MADDR = 0; + if(DMAy_Channelx == DMA1_Channel1) + { + DMA1->INTFCR |= DMA1_Channel1_IT_Mask; + } + else if(DMAy_Channelx == DMA1_Channel2) + { + DMA1->INTFCR |= DMA1_Channel2_IT_Mask; + } + else if(DMAy_Channelx == DMA1_Channel3) + { + DMA1->INTFCR |= DMA1_Channel3_IT_Mask; + } + else if(DMAy_Channelx == DMA1_Channel4) + { + DMA1->INTFCR |= DMA1_Channel4_IT_Mask; + } + else if(DMAy_Channelx == DMA1_Channel5) + { + DMA1->INTFCR |= DMA1_Channel5_IT_Mask; + } + else if(DMAy_Channelx == DMA1_Channel6) + { + DMA1->INTFCR |= DMA1_Channel6_IT_Mask; + } + else if(DMAy_Channelx == DMA1_Channel7) + { + DMA1->INTFCR |= DMA1_Channel7_IT_Mask; + } + else if(DMAy_Channelx == DMA1_Channel8) + { + DMA1->INTFCR |= DMA1_Channel8_IT_Mask; + } +} + +/********************************************************************* + * @fn DMA_Init + * + * @brief Initializes the DMAy Channelx according to the specified + * parameters in the DMA_InitStruct. + * + * @param DMAy_Channelx - here y can be 1 or 2 to select the DMA and x can be + * 1 to 7 for DMA1 and 1 to 11 for DMA2 to select the DMA Channel. + * DMA_InitStruct - pointer to a DMA_InitTypeDef structure that contains + * contains the configuration information for the specified DMA Channel. + * + * @return none + */ +void DMA_Init(DMA_Channel_TypeDef *DMAy_Channelx, DMA_InitTypeDef *DMA_InitStruct) +{ + uint32_t tmpreg = 0; + + tmpreg = DMAy_Channelx->CFGR; + tmpreg &= CFGR_CLEAR_Mask; + tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode | + DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc | + DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize | + DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M; + + DMAy_Channelx->CFGR = tmpreg; + DMAy_Channelx->CNTR = DMA_InitStruct->DMA_BufferSize; + DMAy_Channelx->PADDR = DMA_InitStruct->DMA_PeripheralBaseAddr; + DMAy_Channelx->MADDR = DMA_InitStruct->DMA_MemoryBaseAddr; +} + +/********************************************************************* + * @fn DMA_StructInit + * + * @brief Fills each DMA_InitStruct member with its default value. + * + * @param DMAy_Channelx - here y can be 1 or 2 to select the DMA and x can be + * 1 to 7 for DMA1 and 1 to 11 for DMA2 to select the DMA Channel. + * DMA_InitStruct - pointer to a DMA_InitTypeDef structure that contains + * contains the configuration information for the specified DMA Channel. + * + * @return none + */ +void DMA_StructInit(DMA_InitTypeDef *DMA_InitStruct) +{ + DMA_InitStruct->DMA_PeripheralBaseAddr = 0; + DMA_InitStruct->DMA_MemoryBaseAddr = 0; + DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC; + DMA_InitStruct->DMA_BufferSize = 0; + DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable; + DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable; + DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; + DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; + DMA_InitStruct->DMA_Mode = DMA_Mode_Normal; + DMA_InitStruct->DMA_Priority = DMA_Priority_Low; + DMA_InitStruct->DMA_M2M = DMA_M2M_Disable; +} + +/********************************************************************* + * @fn DMA_Cmd + * + * @brief Enables or disables the specified DMAy Channelx. + * + * @param DMAy_Channelx - here y can be 1 or 2 to select the DMA and x can be + * 1 to 7 for DMA1 and 1 to 11 for DMA2 to select the DMA Channel. + * NewState - new state of the DMAy Channelx(ENABLE or DISABLE). + * + * @return none + */ +void DMA_Cmd(DMA_Channel_TypeDef *DMAy_Channelx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + DMAy_Channelx->CFGR |= DMA_CFGR1_EN; + } + else + { + DMAy_Channelx->CFGR &= (uint16_t)(~DMA_CFGR1_EN); + } +} + +/********************************************************************* + * @fn DMA_ITConfig + * + * @brief Enables or disables the specified DMAy Channelx interrupts. + * + * @param DMAy_Channelx - here y can be 1 or 2 to select the DMA and x can be + * 1 to 7 for DMA1 and 1 to 11 for DMA2 to select the DMA Channel. + * DMA_IT - specifies the DMA interrupts sources to be enabled + * or disabled. + * DMA_IT_TC - Transfer complete interrupt mask + * DMA_IT_HT - Half transfer interrupt mask + * DMA_IT_TE - Transfer error interrupt mask + * NewState - new state of the DMAy Channelx(ENABLE or DISABLE). + * + * @return none + */ +void DMA_ITConfig(DMA_Channel_TypeDef *DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + DMAy_Channelx->CFGR |= DMA_IT; + } + else + { + DMAy_Channelx->CFGR &= ~DMA_IT; + } +} + +/********************************************************************* + * @fn DMA_SetCurrDataCounter + * + * @brief Sets the number of data units in the current DMAy Channelx transfer. + * + * @param DMAy_Channelx - here y can be 1 or 2 to select the DMA and x can be + * 1 to 7 for DMA1 and 1 to 11 for DMA2 to select the DMA Channel. + * DataNumber - The number of data units in the current DMAy Channelx + * transfer. + * + * @return none + */ +void DMA_SetCurrDataCounter(DMA_Channel_TypeDef *DMAy_Channelx, uint16_t DataNumber) +{ + DMAy_Channelx->CNTR = DataNumber; +} + +/********************************************************************* + * @fn DMA_GetCurrDataCounter + * + * @brief Returns the number of remaining data units in the current + * DMAy Channelx transfer. + * + * @param DMAy_Channelx - here y can be 1 or 2 to select the DMA and x can be + * 1 to 7 for DMA1 and 1 to 11 for DMA2 to select the DMA Channel. + * + * @return DataNumber - The number of remaining data units in the current + * DMAy Channelx transfer. + */ +uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef *DMAy_Channelx) +{ + return ((uint16_t)(DMAy_Channelx->CNTR)); +} + +/********************************************************************* + * @fn DMA_GetFlagStatus + * + * @brief Checks whether the specified DMAy Channelx flag is set or not. + * + * @param DMAy_FLAG - specifies the flag to check. + * DMA1_FLAG_GL1 - DMA1 Channel1 global flag. + * DMA1_FLAG_TC1 - DMA1 Channel1 transfer complete flag. + * DMA1_FLAG_HT1 - DMA1 Channel1 half transfer flag. + * DMA1_FLAG_TE1 - DMA1 Channel1 transfer error flag. + * DMA1_FLAG_GL2 - DMA1 Channel2 global flag. + * DMA1_FLAG_TC2 - DMA1 Channel2 transfer complete flag. + * DMA1_FLAG_HT2 - DMA1 Channel2 half transfer flag. + * DMA1_FLAG_TE2 - DMA1 Channel2 transfer error flag. + * DMA1_FLAG_GL3 - DMA1 Channel3 global flag. + * DMA1_FLAG_TC3 - DMA1 Channel3 transfer complete flag. + * DMA1_FLAG_HT3 - DMA1 Channel3 half transfer flag. + * DMA1_FLAG_TE3 - DMA1 Channel3 transfer error flag. + * DMA1_FLAG_GL4 - DMA1 Channel4 global flag. + * DMA1_FLAG_TC4 - DMA1 Channel4 transfer complete flag. + * DMA1_FLAG_HT4 - DMA1 Channel4 half transfer flag. + * DMA1_FLAG_TE4 - DMA1 Channel4 transfer error flag. + * DMA1_FLAG_GL5 - DMA1 Channel5 global flag. + * DMA1_FLAG_TC5 - DMA1 Channel5 transfer complete flag. + * DMA1_FLAG_HT5 - DMA1 Channel5 half transfer flag. + * DMA1_FLAG_TE5 - DMA1 Channel5 transfer error flag. + * DMA1_FLAG_GL6 - DMA1 Channel6 global flag. + * DMA1_FLAG_TC6 - DMA1 Channel6 transfer complete flag. + * DMA1_FLAG_HT6 - DMA1 Channel6 half transfer flag. + * DMA1_FLAG_TE6 - DMA1 Channel6 transfer error flag. + * DMA1_FLAG_GL7 - DMA1 Channel7 global flag. + * DMA1_FLAG_TC7 - DMA1 Channel7 transfer complete flag. + * DMA1_FLAG_HT7 - DMA1 Channel7 half transfer flag. + * DMA1_FLAG_TE7 - DMA1 Channel7 transfer error flag. + * DMA2_FLAG_GL1 - DMA2 Channel1 global flag. + * DMA2_FLAG_TC1 - DMA2 Channel1 transfer complete flag. + * DMA2_FLAG_HT1 - DMA2 Channel1 half transfer flag. + * DMA2_FLAG_TE1 - DMA2 Channel1 transfer error flag. + + * @return The new state of DMAy_FLAG (SET or RESET). + */ +FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + tmpreg = DMA1->INTFR; + + if((tmpreg & DMAy_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn DMA_ClearFlag + * + * @brief Clears the DMAy Channelx's pending flags. + * + * @param DMAy_FLAG - specifies the flag to check. + * DMA1_FLAG_GL1 - DMA1 Channel1 global flag. + * DMA1_FLAG_TC1 - DMA1 Channel1 transfer complete flag. + * DMA1_FLAG_HT1 - DMA1 Channel1 half transfer flag. + * DMA1_FLAG_TE1 - DMA1 Channel1 transfer error flag. + * DMA1_FLAG_GL2 - DMA1 Channel2 global flag. + * DMA1_FLAG_TC2 - DMA1 Channel2 transfer complete flag. + * DMA1_FLAG_HT2 - DMA1 Channel2 half transfer flag. + * DMA1_FLAG_TE2 - DMA1 Channel2 transfer error flag. + * DMA1_FLAG_GL3 - DMA1 Channel3 global flag. + * DMA1_FLAG_TC3 - DMA1 Channel3 transfer complete flag. + * DMA1_FLAG_HT3 - DMA1 Channel3 half transfer flag. + * DMA1_FLAG_TE3 - DMA1 Channel3 transfer error flag. + * DMA1_FLAG_GL4 - DMA1 Channel4 global flag. + * DMA1_FLAG_TC4 - DMA1 Channel4 transfer complete flag. + * DMA1_FLAG_HT4 - DMA1 Channel4 half transfer flag. + * DMA1_FLAG_TE4 - DMA1 Channel4 transfer error flag. + * DMA1_FLAG_GL5 - DMA1 Channel5 global flag. + * DMA1_FLAG_TC5 - DMA1 Channel5 transfer complete flag. + * DMA1_FLAG_HT5 - DMA1 Channel5 half transfer flag. + * DMA1_FLAG_TE5 - DMA1 Channel5 transfer error flag. + * DMA1_FLAG_GL6 - DMA1 Channel6 global flag. + * DMA1_FLAG_TC6 - DMA1 Channel6 transfer complete flag. + * DMA1_FLAG_HT6 - DMA1 Channel6 half transfer flag. + * DMA1_FLAG_TE6 - DMA1 Channel6 transfer error flag. + * DMA1_FLAG_GL7 - DMA1 Channel7 global flag. + * DMA1_FLAG_TC7 - DMA1 Channel7 transfer complete flag. + * DMA1_FLAG_HT7 - DMA1 Channel7 half transfer flag. + * DMA1_FLAG_TE7 - DMA1 Channel7 transfer error flag. + * DMA2_FLAG_GL1 - DMA2 Channel1 global flag. + * DMA2_FLAG_TC1 - DMA2 Channel1 transfer complete flag. + * DMA2_FLAG_HT1 - DMA2 Channel1 half transfer flag. + * DMA2_FLAG_TE1 - DMA2 Channel1 transfer error flag. + * @return none + */ +void DMA_ClearFlag(uint32_t DMAy_FLAG) +{ + DMA1->INTFCR = DMAy_FLAG; +} + +/********************************************************************* + * @fn DMA_GetITStatus + * + * @brief Checks whether the specified DMAy Channelx interrupt has + * occurred or not. + * + * @param DMAy_IT - specifies the DMAy interrupt source to check. + * DMA1_IT_GL1 - DMA1 Channel1 global flag. + * DMA1_IT_TC1 - DMA1 Channel1 transfer complete flag. + * DMA1_IT_HT1 - DMA1 Channel1 half transfer flag. + * DMA1_IT_TE1 - DMA1 Channel1 transfer error flag. + * DMA1_IT_GL2 - DMA1 Channel2 global flag. + * DMA1_IT_TC2 - DMA1 Channel2 transfer complete flag. + * DMA1_IT_HT2 - DMA1 Channel2 half transfer flag. + * DMA1_IT_TE2 - DMA1 Channel2 transfer error flag. + * DMA1_IT_GL3 - DMA1 Channel3 global flag. + * DMA1_IT_TC3 - DMA1 Channel3 transfer complete flag. + * DMA1_IT_HT3 - DMA1 Channel3 half transfer flag. + * DMA1_IT_TE3 - DMA1 Channel3 transfer error flag. + * DMA1_IT_GL4 - DMA1 Channel4 global flag. + * DMA1_IT_TC4 - DMA1 Channel4 transfer complete flag. + * DMA1_IT_HT4 - DMA1 Channel4 half transfer flag. + * DMA1_IT_TE4 - DMA1 Channel4 transfer error flag. + * DMA1_IT_GL5 - DMA1 Channel5 global flag. + * DMA1_IT_TC5 - DMA1 Channel5 transfer complete flag. + * DMA1_IT_HT5 - DMA1 Channel5 half transfer flag. + * DMA1_IT_TE5 - DMA1 Channel5 transfer error flag. + * DMA1_IT_GL6 - DMA1 Channel6 global flag. + * DMA1_IT_TC6 - DMA1 Channel6 transfer complete flag. + * DMA1_IT_HT6 - DMA1 Channel6 half transfer flag. + * DMA1_IT_TE6 - DMA1 Channel6 transfer error flag. + * DMA1_IT_GL7 - DMA1 Channel7 global flag. + * DMA1_IT_TC7 - DMA1 Channel7 transfer complete flag. + * DMA1_IT_HT7 - DMA1 Channel7 half transfer flag. + * DMA1_IT_TE7 - DMA1 Channel7 transfer error flag. + * DMA2_IT_GL1 - DMA2 Channel1 global flag. + * DMA2_IT_TC1 - DMA2 Channel1 transfer complete flag. + * DMA2_IT_HT1 - DMA2 Channel1 half transfer flag. + * DMA2_IT_TE1 - DMA2 Channel1 transfer error flag. + * @return The new state of DMAy_IT (SET or RESET). + */ +ITStatus DMA_GetITStatus(uint32_t DMAy_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + tmpreg = DMA1->INTFR; + + if((tmpreg & DMAy_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/********************************************************************* + * @fn DMA_ClearITPendingBit + * + * @brief Clears the DMAy Channelx's interrupt pending bits. + * + * @param DMAy_IT - specifies the DMAy interrupt source to check. + * DMA1_IT_GL1 - DMA1 Channel1 global flag. + * DMA1_IT_TC1 - DMA1 Channel1 transfer complete flag. + * DMA1_IT_HT1 - DMA1 Channel1 half transfer flag. + * DMA1_IT_TE1 - DMA1 Channel1 transfer error flag. + * DMA1_IT_GL2 - DMA1 Channel2 global flag. + * DMA1_IT_TC2 - DMA1 Channel2 transfer complete flag. + * DMA1_IT_HT2 - DMA1 Channel2 half transfer flag. + * DMA1_IT_TE2 - DMA1 Channel2 transfer error flag. + * DMA1_IT_GL3 - DMA1 Channel3 global flag. + * DMA1_IT_TC3 - DMA1 Channel3 transfer complete flag. + * DMA1_IT_HT3 - DMA1 Channel3 half transfer flag. + * DMA1_IT_TE3 - DMA1 Channel3 transfer error flag. + * DMA1_IT_GL4 - DMA1 Channel4 global flag. + * DMA1_IT_TC4 - DMA1 Channel4 transfer complete flag. + * DMA1_IT_HT4 - DMA1 Channel4 half transfer flag. + * DMA1_IT_TE4 - DMA1 Channel4 transfer error flag. + * DMA1_IT_GL5 - DMA1 Channel5 global flag. + * DMA1_IT_TC5 - DMA1 Channel5 transfer complete flag. + * DMA1_IT_HT5 - DMA1 Channel5 half transfer flag. + * DMA1_IT_TE5 - DMA1 Channel5 transfer error flag. + * DMA1_IT_GL6 - DMA1 Channel6 global flag. + * DMA1_IT_TC6 - DMA1 Channel6 transfer complete flag. + * DMA1_IT_HT6 - DMA1 Channel6 half transfer flag. + * DMA1_IT_TE6 - DMA1 Channel6 transfer error flag. + * DMA1_IT_GL7 - DMA1 Channel7 global flag. + * DMA1_IT_TC7 - DMA1 Channel7 transfer complete flag. + * DMA1_IT_HT7 - DMA1 Channel7 half transfer flag. + * DMA1_IT_TE7 - DMA1 Channel7 transfer error flag. + * DMA2_IT_GL1 - DMA2 Channel1 global flag. + * DMA2_IT_TC1 - DMA2 Channel1 transfer complete flag. + * DMA2_IT_HT1 - DMA2 Channel1 half transfer flag. + * DMA2_IT_TE1 - DMA2 Channel1 transfer error flag. + * @return none + */ +void DMA_ClearITPendingBit(uint32_t DMAy_IT) +{ + DMA1->INTFCR = DMAy_IT; +} diff --git a/gat_stand_fw/periph/src/ch32v20x_exti.c b/gat_stand_fw/periph/src/ch32v20x_exti.c new file mode 100644 index 0000000..413fce7 --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_exti.c @@ -0,0 +1,182 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_exti.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the EXTI firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_exti.h" + +/* No interrupt selected */ +#define EXTI_LINENONE ((uint32_t)0x00000) + +/********************************************************************* + * @fn EXTI_DeInit + * + * @brief Deinitializes the EXTI peripheral registers to their default + * reset values. + * + * @return none. + */ +void EXTI_DeInit(void) +{ + EXTI->INTENR = 0x00000000; + EXTI->EVENR = 0x00000000; + EXTI->RTENR = 0x00000000; + EXTI->FTENR = 0x00000000; + EXTI->INTFR = 0x000FFFFF; +} + +/********************************************************************* + * @fn EXTI_Init + * + * @brief Initializes the EXTI peripheral according to the specified + * parameters in the EXTI_InitStruct. + * + * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure + * + * @return none. + */ +void EXTI_Init(EXTI_InitTypeDef *EXTI_InitStruct) +{ + uint32_t tmp = 0; + + tmp = (uint32_t)EXTI_BASE; + if(EXTI_InitStruct->EXTI_LineCmd != DISABLE) + { + EXTI->INTENR &= ~EXTI_InitStruct->EXTI_Line; + EXTI->EVENR &= ~EXTI_InitStruct->EXTI_Line; + tmp += EXTI_InitStruct->EXTI_Mode; + *(__IO uint32_t *)tmp |= EXTI_InitStruct->EXTI_Line; + EXTI->RTENR &= ~EXTI_InitStruct->EXTI_Line; + EXTI->FTENR &= ~EXTI_InitStruct->EXTI_Line; + if(EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) + { + EXTI->RTENR |= EXTI_InitStruct->EXTI_Line; + EXTI->FTENR |= EXTI_InitStruct->EXTI_Line; + } + else + { + tmp = (uint32_t)EXTI_BASE; + tmp += EXTI_InitStruct->EXTI_Trigger; + *(__IO uint32_t *)tmp |= EXTI_InitStruct->EXTI_Line; + } + } + else + { + tmp += EXTI_InitStruct->EXTI_Mode; + *(__IO uint32_t *)tmp &= ~EXTI_InitStruct->EXTI_Line; + } +} + +/********************************************************************* + * @fn EXTI_StructInit + * + * @brief Fills each EXTI_InitStruct member with its reset value. + * + * @param EXTI_InitStruct - pointer to a EXTI_InitTypeDef structure + * + * @return none. + */ +void EXTI_StructInit(EXTI_InitTypeDef *EXTI_InitStruct) +{ + EXTI_InitStruct->EXTI_Line = EXTI_LINENONE; + EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt; + EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling; + EXTI_InitStruct->EXTI_LineCmd = DISABLE; +} + +/********************************************************************* + * @fn EXTI_GenerateSWInterrupt + * + * @brief Generates a Software interrupt. + * + * @param EXTI_Line - specifies the EXTI lines to be enabled or disabled. + * + * @return none. + */ +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) +{ + EXTI->SWIEVR |= EXTI_Line; +} + +/********************************************************************* + * @fn EXTI_GetFlagStatus + * + * @brief Checks whether the specified EXTI line flag is set or not. + * + * @param EXTI_Line - specifies the EXTI lines to be enabled or disabled. + * + * @return The new state of EXTI_Line (SET or RESET). + */ +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line) +{ + FlagStatus bitstatus = RESET; + if((EXTI->INTFR & EXTI_Line) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/********************************************************************* + * @fn EXTI_ClearFlag + * + * @brief Clears the EXTI's line pending flags. + * + * @param EXTI_Line - specifies the EXTI lines to be enabled or disabled. + * + * @return None + */ +void EXTI_ClearFlag(uint32_t EXTI_Line) +{ + EXTI->INTFR = EXTI_Line; +} + +/********************************************************************* + * @fn EXTI_GetITStatus + * + * @brief Checks whether the specified EXTI line is asserted or not. + * + * @param EXTI_Line - specifies the EXTI lines to be enabled or disabled. + * + * @return The new state of EXTI_Line (SET or RESET). + */ +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + enablestatus = EXTI->INTENR & EXTI_Line; + if(((EXTI->INTFR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/********************************************************************* + * @fn EXTI_ClearITPendingBit + * + * @brief Clears the EXTI's line pending bits. + * + * @param EXTI_Line - specifies the EXTI lines to be enabled or disabled. + * + * @return none + */ +void EXTI_ClearITPendingBit(uint32_t EXTI_Line) +{ + EXTI->INTFR = EXTI_Line; +} diff --git a/gat_stand_fw/periph/src/ch32v20x_flash.c b/gat_stand_fw/periph/src/ch32v20x_flash.c new file mode 100644 index 0000000..c5e3182 --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_flash.c @@ -0,0 +1,1250 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_flash.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the FLASH firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_flash.h" + +/* Flash Control Register bits */ +#define CR_PG_Set ((uint32_t)0x00000001) +#define CR_PG_Reset ((uint32_t)0xFFFFFFFE) +#define CR_PER_Set ((uint32_t)0x00000002) +#define CR_PER_Reset ((uint32_t)0xFFFFFFFD) +#define CR_MER_Set ((uint32_t)0x00000004) +#define CR_MER_Reset ((uint32_t)0xFFFFFFFB) +#define CR_OPTPG_Set ((uint32_t)0x00000010) +#define CR_OPTPG_Reset ((uint32_t)0xFFFFFFEF) +#define CR_OPTER_Set ((uint32_t)0x00000020) +#define CR_OPTER_Reset ((uint32_t)0xFFFFFFDF) +#define CR_STRT_Set ((uint32_t)0x00000040) +#define CR_LOCK_Set ((uint32_t)0x00000080) +#define CR_FLOCK_Set ((uint32_t)0x00008000) +#define CR_PAGE_PG ((uint32_t)0x00010000) +#define CR_PAGE_ER ((uint32_t)0x00020000) +#define CR_BER32 ((uint32_t)0x00040000) +#define CR_BER64 ((uint32_t)0x00080000) +#define CR_PG_STRT ((uint32_t)0x00200000) + +/* FLASH Status Register bits */ +#define SR_BSY ((uint32_t)0x00000001) +#define SR_WR_BSY ((uint32_t)0x00000002) +#define SR_WRPRTERR ((uint32_t)0x00000010) +#define SR_EOP ((uint32_t)0x00000020) + +/* FLASH Mask */ +#define RDPRT_Mask ((uint32_t)0x00000002) +#define WRP0_Mask ((uint32_t)0x000000FF) +#define WRP1_Mask ((uint32_t)0x0000FF00) +#define WRP2_Mask ((uint32_t)0x00FF0000) +#define WRP3_Mask ((uint32_t)0xFF000000) +#define OB_USER_BFB2 ((uint16_t)0x0008) + +/* FLASH Keys */ +#define RDP_Key ((uint16_t)0x00A5) +#define FLASH_KEY1 ((uint32_t)0x45670123) +#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) + +/* FLASH BANK address */ +#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF) + +/* EEPROM address */ +#define EEPROM_ADDRESS ((uint32_t)0x8070000) + +/* Delay definition */ +#define EraseTimeout ((uint32_t)0x000B0000) +#define ProgramTimeout ((uint32_t)0x00005000) + +/* Flash Program Valid Address */ +#define ValidAddrStart (FLASH_BASE) + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) +#define ValidAddrEnd (FLASH_BASE + 0x78000) +#else +#define ValidAddrEnd (FLASH_BASE + 0x38000) +#endif + +/* FLASH Size */ +#define Size_256B 0x100 +#define Size_4KB 0x1000 +#define Size_32KB 0x8000 + +/********************************************************************* + * @fn FLASH_Unlock + * + * @brief Unlocks the FLASH Program Erase Controller. + * + * @return none + */ +void FLASH_Unlock(void) +{ + /* Authorize the FPEC of Bank1 Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; +} + +/********************************************************************* + * @fn FLASH_UnlockBank1 + * + * @brief Unlocks the FLASH Bank1 Program Erase Controller. + * equivalent to FLASH_Unlock function. + * + * @return none + */ +void FLASH_UnlockBank1(void) +{ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; +} + +/********************************************************************* + * @fn FLASH_Lock + * + * @brief Locks the FLASH Program Erase Controller. + * + * @return none + */ +void FLASH_Lock(void) +{ + FLASH->CTLR |= CR_LOCK_Set; +} + +/********************************************************************* + * @fn FLASH_LockBank1 + * + * @brief Locks the FLASH Bank1 Program Erase Controller. + * + * @return none + */ +void FLASH_LockBank1(void) +{ + FLASH->CTLR |= CR_LOCK_Set; +} + +/********************************************************************* + * @fn FLASH_ErasePage + * + * @brief Erases a specified FLASH page(page size 4KB). + * + * @param Page_Address - The page address to be erased. + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ErasePage(uint32_t Page_Address) +{ + FLASH_Status status = FLASH_COMPLETE; + + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + FLASH->CTLR |= CR_PER_Set; + FLASH->ADDR = Page_Address; + FLASH->CTLR |= CR_STRT_Set; + + status = FLASH_WaitForLastOperation(EraseTimeout); + + FLASH->CTLR &= CR_PER_Reset; + } + + return status; +} + +/********************************************************************* + * @fn FLASH_EraseAllPages + * + * @brief Erases all FLASH pages. + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllPages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + FLASH->CTLR |= CR_MER_Set; + FLASH->CTLR |= CR_STRT_Set; + + status = FLASH_WaitForLastOperation(EraseTimeout); + + FLASH->CTLR &= CR_MER_Reset; + } + + return status; +} + +/********************************************************************* + * @fn FLASH_EraseAllBank1Pages + * + * @brief Erases all Bank1 FLASH pages. + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllBank1Pages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + FLASH->CTLR |= CR_MER_Set; + FLASH->CTLR |= CR_STRT_Set; + + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + FLASH->CTLR &= CR_MER_Reset; + } + return status; +} + +/********************************************************************* + * @fn FLASH_EraseOptionBytes + * + * @brief Erases the FLASH option bytes. + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseOptionBytes(void) +{ + uint16_t rdptmp = RDP_Key; + uint32_t Address = 0x1FFFF800; + __IO uint8_t i; + + FLASH_Status status = FLASH_COMPLETE; + if(FLASH_GetReadOutProtectionStatus() != RESET) + { + rdptmp = 0x00; + } + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + FLASH->OBKEYR = FLASH_KEY1; + FLASH->OBKEYR = FLASH_KEY2; + + FLASH->CTLR |= CR_OPTER_Set; + FLASH->CTLR |= CR_STRT_Set; + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + FLASH->CTLR &= CR_OPTER_Reset; + FLASH->CTLR |= CR_OPTPG_Set; + OB->RDPR = (uint16_t)rdptmp; + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status != FLASH_TIMEOUT) + { + FLASH->CTLR &= CR_OPTPG_Reset; + } + } + else + { + if(status != FLASH_TIMEOUT) + { + FLASH->CTLR &= CR_OPTPG_Reset; + } + } + + /* Write 0xFF */ + FLASH->CTLR |= CR_OPTPG_Set; + + for(i = 0; i < 8; i++){ + *(uint16_t *)(Address + 2 * i) = 0x00FF; + while(FLASH->STATR & SR_BSY); + } + + FLASH->CTLR &= ~CR_OPTPG_Set; + } + return status; +} + +/********************************************************************* + * @fn FLASH_ProgramWord + * + * @brief Programs a word at a specified address. + * + * @param Address - specifies the address to be programmed. + * Data - specifies the data to be programmed. + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + __IO uint32_t tmp = 0; + + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + FLASH->CTLR |= CR_PG_Set; + + *(__IO uint16_t *)Address = (uint16_t)Data; + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + tmp = Address + 2; + *(__IO uint16_t *)tmp = Data >> 16; + status = FLASH_WaitForLastOperation(ProgramTimeout); + FLASH->CTLR &= CR_PG_Reset; + } + else + { + FLASH->CTLR &= CR_PG_Reset; + } + } + + return status; +} + +/********************************************************************* + * @fn FLASH_ProgramHalfWord + * + * @brief Programs a half word at a specified address. + * + * @param Address - specifies the address to be programmed. + * Data - specifies the data to be programmed. + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + FLASH->CTLR |= CR_PG_Set; + *(__IO uint16_t *)Address = Data; + status = FLASH_WaitForLastOperation(ProgramTimeout); + FLASH->CTLR &= CR_PG_Reset; + } + + return status; +} + +/********************************************************************* + * @fn FLASH_ProgramOptionByteData + * + * @brief Programs a half word at a specified Option Byte Data address. + * + * @param Address - specifies the address to be programmed. + * Data - specifies the data to be programmed. + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + uint32_t Addr = 0x1FFFF800; + __IO uint8_t i; + uint16_t pbuf[8]; + + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status == FLASH_COMPLETE) + { + FLASH->OBKEYR = FLASH_KEY1; + FLASH->OBKEYR = FLASH_KEY2; + + /* Read optionbytes */ + for(i = 0; i < 8; i++){ + pbuf[i] = *(uint16_t *)(Addr + 2 * i); + } + + /* Erase optionbytes */ + FLASH->CTLR |= CR_OPTER_Set; + FLASH->CTLR |= CR_STRT_Set; + while(FLASH->STATR & SR_BSY); + FLASH->CTLR &= ~CR_OPTER_Set; + + /* Write optionbytes */ + pbuf[((Address - 0x1FFFF800) / 2)] = ((((uint16_t) ~(Data)) << 8) | ((uint16_t)Data)); + + FLASH->CTLR |= CR_OPTPG_Set; + + for(i = 0; i < 8; i++){ + *(uint16_t *)(Addr + 2 * i) = pbuf[i]; + while(FLASH->STATR & SR_BSY) ; + } + + FLASH->CTLR &= ~CR_OPTPG_Set; + } + + return status; +} + +/********************************************************************* + * @fn FLASH_EnableWriteProtection + * + * @brief Write protects the desired sectors + * + * @param FLASH_Sectors - specifies the address of the pages to be write protected. + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Sectors) +{ + uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF; + FLASH_Status status = FLASH_COMPLETE; + uint32_t Addr = 0x1FFFF800; + __IO uint8_t i; + uint16_t pbuf[8]; + + FLASH_Sectors = (uint32_t)(~FLASH_Sectors); + WRP0_Data = (uint16_t)(FLASH_Sectors & WRP0_Mask); + WRP1_Data = (uint16_t)((FLASH_Sectors & WRP1_Mask) >> 8); + WRP2_Data = (uint16_t)((FLASH_Sectors & WRP2_Mask) >> 16); + WRP3_Data = (uint16_t)((FLASH_Sectors & WRP3_Mask) >> 24); + + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + FLASH->OBKEYR = FLASH_KEY1; + FLASH->OBKEYR = FLASH_KEY2; + + /* Read optionbytes */ + for(i = 0; i < 8; i++){ + pbuf[i] = *(uint16_t *)(Addr + 2 * i); + } + + /* Erase optionbytes */ + FLASH->CTLR |= CR_OPTER_Set; + FLASH->CTLR |= CR_STRT_Set; + while(FLASH->STATR & SR_BSY); + FLASH->CTLR &= ~CR_OPTER_Set; + + /* Write optionbytes */ + pbuf[4] = WRP0_Data; + pbuf[5] = WRP1_Data; + pbuf[6] = WRP2_Data; + pbuf[7] = WRP3_Data; + + FLASH->CTLR |= CR_OPTPG_Set; + for(i = 0; i < 8; i++){ + *(uint16_t *)(Addr + 2 * i) = pbuf[i]; + while(FLASH->STATR & SR_BSY); + } + FLASH->CTLR &= ~CR_OPTPG_Set; + } + return status; +} + +/********************************************************************* + * @fn FLASH_ReadOutProtection + * + * @brief Enables or disables the read out protection. + * + * @param Newstate - new state of the ReadOut Protection(ENABLE or DISABLE). + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState) +{ + FLASH_Status status = FLASH_COMPLETE; + uint32_t Addr = 0x1FFFF800; + __IO uint8_t i; + uint16_t pbuf[8]; + + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + FLASH->OBKEYR = FLASH_KEY1; + FLASH->OBKEYR = FLASH_KEY2; + + /* Read optionbytes */ + for(i = 0; i < 8; i++){ + pbuf[i] = *(uint16_t *)(Addr + 2 * i); + } + + /* Erase optionbytes */ + FLASH->CTLR |= CR_OPTER_Set; + FLASH->CTLR |= CR_STRT_Set; + while(FLASH->STATR & SR_BSY); + FLASH->CTLR &= ~CR_OPTER_Set; + + /* Write optionbytes */ + if(NewState == DISABLE) + pbuf[0] = 0x5AA5; + else + pbuf[0] = 0x00FF; + + FLASH->CTLR |= CR_OPTPG_Set; + for(i = 0; i < 8; i++){ + *(uint16_t *)(Addr + 2 * i) = pbuf[i]; + while(FLASH->STATR & SR_BSY); + } + FLASH->CTLR &= ~CR_OPTPG_Set; + } + return status; +} + +/********************************************************************* + * @fn FLASH_UserOptionByteConfig + * + * @brief Programs the FLASH User Option Byte - IWDG_SW / RST_STOP / RST_STDBY. + * + * @param OB_IWDG - Selects the IWDG mode + * OB_IWDG_SW - Software IWDG selected + * OB_IWDG_HW - Hardware IWDG selected + * OB_STOP - Reset event when entering STOP mode. + * OB_STOP_NoRST - No reset generated when entering in STOP + * OB_STOP_RST - Reset generated when entering in STOP + * OB_STDBY - Reset event when entering Standby mode. + * OB_STDBY_NoRST - No reset generated when entering in STANDBY + * OB_STDBY_RST - Reset generated when entering in STANDBY + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY) +{ + FLASH_Status status = FLASH_COMPLETE; + uint32_t Addr = 0x1FFFF800; + __IO uint8_t i; + uint16_t pbuf[8]; + + FLASH->OBKEYR = FLASH_KEY1; + FLASH->OBKEYR = FLASH_KEY2; + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Read optionbytes */ + for(i = 0; i < 8; i++){ + pbuf[i] = *(uint16_t *)(Addr + 2 * i); + } + + /* Erase optionbytes */ + FLASH->CTLR |= CR_OPTER_Set; + FLASH->CTLR |= CR_STRT_Set; + while(FLASH->STATR & SR_BSY); + FLASH->CTLR &= ~CR_OPTER_Set; + + /* Write optionbytes */ + pbuf[1] = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8))); + + FLASH->CTLR |= CR_OPTPG_Set; + for(i = 0; i < 8; i++){ + *(uint16_t *)(Addr + 2 * i) = pbuf[i]; + while(FLASH->STATR & SR_BSY); + } + FLASH->CTLR &= ~CR_OPTPG_Set; + } + return status; +} + +/********************************************************************* + * @fn FLASH_GetUserOptionByte + * + * @brief Returns the FLASH User Option Bytes values. + * + * @return The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1) + * and RST_STDBY(Bit2). + */ +uint32_t FLASH_GetUserOptionByte(void) +{ + return (uint32_t)(FLASH->OBR >> 2); +} + +/********************************************************************* + * @fn FLASH_GetWriteProtectionOptionByte + * + * @brief Returns the FLASH Write Protection Option Bytes Register value. + * + * @return The FLASH Write Protection Option Bytes Register value. + */ +uint32_t FLASH_GetWriteProtectionOptionByte(void) +{ + return (uint32_t)(FLASH->WPR); +} + +/********************************************************************* + * @fn FLASH_GetReadOutProtectionStatus + * + * @brief Checks whether the FLASH Read Out Protection Status is set or not. + * + * @return FLASH ReadOut Protection Status(SET or RESET) + */ +FlagStatus FLASH_GetReadOutProtectionStatus(void) +{ + FlagStatus readoutstatus = RESET; + if((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET) + { + readoutstatus = SET; + } + else + { + readoutstatus = RESET; + } + return readoutstatus; +} + +/********************************************************************* + * @fn FLASH_ITConfig + * + * @brief Enables or disables the specified FLASH interrupts. + * + * @param FLASH_IT - specifies the FLASH interrupt sources to be enabled or disabled. + * FLASH_IT_ERROR - FLASH Error Interrupt + * FLASH_IT_EOP - FLASH end of operation Interrupt + * NewState - new state of the specified Flash interrupts(ENABLE or DISABLE). + * + * @return FLASH Prefetch Buffer Status (SET or RESET). + */ +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + FLASH->CTLR |= FLASH_IT; + } + else + { + FLASH->CTLR &= ~(uint32_t)FLASH_IT; + } +} + +/********************************************************************* + * @fn FLASH_GetFlagStatus + * + * @brief Checks whether the specified FLASH flag is set or not. + * + * @param FLASH_FLAG - specifies the FLASH flag to check. + * FLASH_FLAG_BSY - FLASH Busy flag + * FLASH_FLAG_WRPRTERR - FLASH Write protected error flag + * FLASH_FLAG_EOP - FLASH End of Operation flag + * FLASH_FLAG_OPTERR - FLASH Option Byte error flag + * + * @return The new state of FLASH_FLAG (SET or RESET). + */ +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG) +{ + FlagStatus bitstatus = RESET; + + if(FLASH_FLAG == FLASH_FLAG_OPTERR) + { + if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH->STATR & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + return bitstatus; +} + +/********************************************************************* + * @fn FLASH_ClearFlag + * + * @brief Clears the FLASH's pending flags. + * + * @param FLASH_FLAG - specifies the FLASH flags to clear. + * FLASH_FLAG_WRPRTERR - FLASH Write protected error flag + * FLASH_FLAG_EOP - FLASH End of Operation flag + * + * @return none + */ +void FLASH_ClearFlag(uint32_t FLASH_FLAG) +{ + FLASH->STATR = FLASH_FLAG; +} + +/********************************************************************* + * @fn FLASH_GetStatus + * + * @brief Returns the FLASH Status. + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE. + */ +FLASH_Status FLASH_GetStatus(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->STATR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->STATR & FLASH_FLAG_WRPRTERR) != 0) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + return flashstatus; +} + +/********************************************************************* + * @fn FLASH_GetBank1Status + * + * @brief Returns the FLASH Bank1 Status. + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE. + */ +FLASH_Status FLASH_GetBank1Status(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->STATR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->STATR & FLASH_FLAG_BANK1_WRPRTERR) != 0) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + return flashstatus; +} + +/********************************************************************* + * @fn FLASH_WaitForLastOperation + * + * @brief Waits for a Flash operation to complete or a TIMEOUT to occur. + * + * @param Timeout - FLASH programming Timeout + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE. + */ +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + status = FLASH_GetBank1Status(); + while((status == FLASH_BUSY) && (Timeout != 0x00)) + { + status = FLASH_GetBank1Status(); + Timeout--; + } + if(Timeout == 0x00) + { + status = FLASH_TIMEOUT; + } + return status; +} + +/********************************************************************* + * @fn FLASH_WaitForLastBank1Operation + * + * @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur. + * + * @param Timeout - FLASH programming Timeout + * + * @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE. + */ +FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + status = FLASH_GetBank1Status(); + while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00)) + { + status = FLASH_GetBank1Status(); + Timeout--; + } + if(Timeout == 0x00) + { + status = FLASH_TIMEOUT; + } + return status; +} + +/********************************************************************* + * @fn FLASH_Unlock_Fast + * + * @brief Unlocks the Fast Program Erase Mode. + * + * @return none + */ +void FLASH_Unlock_Fast(void) +{ + /* Authorize the FPEC of Bank1 Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; + + /* Fast program mode unlock */ + FLASH->MODEKEYR = FLASH_KEY1; + FLASH->MODEKEYR = FLASH_KEY2; +} + +/********************************************************************* + * @fn FLASH_Lock_Fast + * + * @brief Locks the Fast Program Erase Mode. + * + * @return none + */ +void FLASH_Lock_Fast(void) +{ + FLASH->CTLR |= CR_FLOCK_Set; +} + +/********************************************************************* + * @fn FLASH_ErasePage_Fast + * + * @brief Erases a specified FLASH page (1page = 256Byte). + * + * @param Page_Address - The page address to be erased. + * + * @return none + */ +void FLASH_ErasePage_Fast(uint32_t Page_Address) +{ + Page_Address &= 0xFFFFFF00; + + FLASH->CTLR |= CR_PAGE_ER; + FLASH->ADDR = Page_Address; + FLASH->CTLR |= CR_STRT_Set; + while(FLASH->STATR & SR_BSY); + FLASH->CTLR &= ~CR_PAGE_ER; +} + +/********************************************************************* + * @fn FLASH_EraseBlock_32K_Fast + * + * @brief Erases a specified FLASH Block (1Block = 32KByte). + * + * @param Block_Address - The block address to be erased. + * + * @return none + */ +void FLASH_EraseBlock_32K_Fast(uint32_t Block_Address) +{ + Block_Address &= 0xFFFF8000; + + FLASH->CTLR |= CR_BER32; + FLASH->ADDR = Block_Address; + FLASH->CTLR |= CR_STRT_Set; + while(FLASH->STATR & SR_BSY); + FLASH->CTLR &= ~CR_BER32; +} + +/********************************************************************* + * @fn FLASH_EraseBlock_64K_Fast + * + * @brief Erases a specified FLASH Block (1Block = 64KByte). + * + * @param Block_Address - The block address to be erased. + * + * @return none + */ +void FLASH_EraseBlock_64K_Fast(uint32_t Block_Address) +{ + Block_Address &= 0xFFFF0000; + + FLASH->CTLR |= CR_BER64; + FLASH->ADDR = Block_Address; + FLASH->CTLR |= CR_STRT_Set; + while(FLASH->STATR & SR_BSY); + FLASH->CTLR &= ~CR_BER64; +} + +/********************************************************************* + * @fn FLASH_ProgramPage_Fast + * + * @brief Program a specified FLASH page (1page = 256Byte). + * + * @param Page_Address - The page address to be programed. + * + * @return none + */ +void FLASH_ProgramPage_Fast(uint32_t Page_Address, uint32_t *pbuf) +{ + uint8_t size = 64; + + Page_Address &= 0xFFFFFF00; + + FLASH->CTLR |= CR_PAGE_PG; + while(FLASH->STATR & SR_BSY); + while(FLASH->STATR & SR_WR_BSY); + + while(size) + { + *(uint32_t *)Page_Address = *(uint32_t *)pbuf; + Page_Address += 4; + pbuf += 1; + size -= 1; + while(FLASH->STATR & SR_WR_BSY); + } + + FLASH->CTLR |= CR_PG_STRT; + while(FLASH->STATR & SR_BSY); + FLASH->CTLR &= ~CR_PAGE_PG; +} + +/********************************************************************* + * @fn FLASH_Access_Clock_Cfg + * + * @brief Config FLASH Access Clock(Need to unlock ) + * + * @param FLASH_Access_CLK - + * FLASH_Access_SYSTEM_HALF - System clock/2 + * FLASH_Access_SYSTEM - System clock + * + * @return none + */ +void FLASH_Access_Clock_Cfg(uint32_t FLASH_Access_CLK) +{ + FLASH->CTLR &= ~(1 << 25); + FLASH->CTLR |= FLASH_Access_CLK; +} + +/********************************************************************* + * @fn FLASH_Enhance_Mode + * + * @brief Read FLASH Enhance Mode + * + * @param + * Newstate - new state of the ReadOut Protection(ENABLE or DISABLE). + * + * @return none + */ +void FLASH_Enhance_Mode(FunctionalState NewState) +{ + if(NewState) + { + FLASH->CTLR |= (1 << 24); + } + else + { + FLASH->CTLR &= ~(1 << 24); + FLASH->CTLR |= (1 << 22); + } +} + +/******************************************************************************** + * @fn FLASH_GetMACAddress + * + * @brief Get MAC address + * + * @param *Buffer: Mac address + * + * @return None + */ +void FLASH_GetMACAddress(uint8_t *Buffer) +{ + uint32_t value; + + value = *(uint32_t *)(0x1FFFF7E8); + Buffer[0] = value & 0xFF; + Buffer[1] = (value >> 8) & 0xFF; + Buffer[2] = (value >> 16) & 0xFF; + Buffer[3] = (value >> 24) & 0xFF; + value = *(uint32_t *)(0x1FFFF7EC); + Buffer[4] = value & 0xFF; + Buffer[5] = (value >> 8) & 0xFF; +} + +/********************************************************************* + * @fn ROM_ERASE + * + * @brief Select erases a specified FLASH . + * + * @param StartAddr - Erases Flash start address(StartAddr%256 == 0). + * Cnt - Erases count. + * Erase_Size - Erases size select.The returned value can be: + * Size_32KB, Size_4KB, Size_256B. + * + * @return none. + */ +static void ROM_ERASE(uint32_t StartAddr, uint32_t Cnt, uint32_t Erase_Size) +{ + do{ + if(Erase_Size == Size_32KB) + { + FLASH->CTLR |= CR_BER32; + } + else if(Erase_Size == Size_4KB) + { + FLASH->CTLR |= CR_PER_Set; + } + else if(Erase_Size == Size_256B) + { + FLASH->CTLR |= CR_PAGE_ER; + } + + FLASH->ADDR = StartAddr; + FLASH->CTLR |= CR_STRT_Set; + while(FLASH->STATR & SR_BSY) + ; + + if(Erase_Size == Size_32KB) + { + FLASH->CTLR &= ~CR_BER32; + StartAddr += Size_32KB; + } + else if(Erase_Size == Size_4KB) + { + FLASH->CTLR &= ~CR_PER_Set; + StartAddr += Size_4KB; + } + else if(Erase_Size == Size_256B) + { + FLASH->CTLR &= ~CR_PAGE_ER; + StartAddr += Size_256B; + } + }while(--Cnt); +} + +/********************************************************************* + * @fn FLASH_ROM_ERASE + * + * @brief Erases a specified FLASH . + * + * @param StartAddr - Erases Flash start address(StartAddr%256 == 0). + * Length - Erases Flash start Length(Length%256 == 0). + * + * @return FLASH Status - The returned value can be: FLASH_ADR_RANGE_ERROR, + * FLASH_ALIGN_ERROR, FLASH_OP_RANGE_ERROR or FLASH_COMPLETE. + */ +FLASH_Status FLASH_ROM_ERASE(uint32_t StartAddr, uint32_t Length) +{ + uint32_t Addr0 = 0, Addr1 = 0, Length0 = 0, Length1 = 0; + + FLASH_Status status = FLASH_COMPLETE; + + if((StartAddr < ValidAddrStart) || (StartAddr >= ValidAddrEnd)) + { + return FLASH_ADR_RANGE_ERROR; + } + + if((StartAddr + Length) > ValidAddrEnd) + { + return FLASH_OP_RANGE_ERROR; + } + + if((StartAddr & (Size_256B-1)) || (Length & (Size_256B-1)) || (Length == 0)) + { + return FLASH_ALIGN_ERROR; + } + + /* Authorize the FPEC of Bank1 Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; + + /* Fast mode unlock */ + FLASH->MODEKEYR = FLASH_KEY1; + FLASH->MODEKEYR = FLASH_KEY2; + + Addr0 = StartAddr; + + if(Length >= Size_32KB) + { + Length0 = Size_32KB - (Addr0 & (Size_32KB - 1)); + Addr1 = StartAddr + Length0; + Length1 = Length - Length0; + } + else if(Length >= Size_4KB) + { + Length0 = Size_4KB - (Addr0 & (Size_4KB - 1)); + Addr1 = StartAddr + Length0; + Length1 = Length - Length0; + } + else if(Length >= Size_256B) + { + Length0 = Length; + } + + /* Erase 32KB */ + if(Length0 >= Size_32KB)//front + { + Length = Length0; + if(Addr0 & (Size_32KB - 1)) + { + Length0 = Size_32KB - (Addr0 & (Size_32KB - 1)); + } + else + { + Length0 = 0; + } + + ROM_ERASE((Addr0 + Length0), ((Length - Length0) >> 15), Size_32KB); + } + + if(Length1 >= Size_32KB)//back + { + StartAddr = Addr1; + Length = Length1; + + if((Addr1 + Length1) & (Size_32KB - 1)) + { + Addr1 = ((StartAddr + Length1) & (~(Size_32KB - 1))); + Length1 = (StartAddr + Length1) & (Size_32KB - 1); + } + else + { + Length1 = 0; + } + + ROM_ERASE(StartAddr, ((Length - Length1) >> 15), Size_32KB); + } + + /* Erase 4KB */ + if(Length0 >= Size_4KB) //front + { + Length = Length0; + if(Addr0 & (Size_4KB - 1)) + { + Length0 = Size_4KB - (Addr0 & (Size_4KB - 1)); + } + else + { + Length0 = 0; + } + + ROM_ERASE((Addr0 + Length0), ((Length - Length0) >> 12), Size_4KB); + } + + if(Length1 >= Size_4KB) //back + { + StartAddr = Addr1; + Length = Length1; + + if((Addr1 + Length1) & (Size_4KB - 1)) + { + Addr1 = ((StartAddr + Length1) & (~(Size_4KB - 1))); + Length1 = (StartAddr + Length1) & (Size_4KB - 1); + } + else + { + Length1 = 0; + } + + ROM_ERASE(StartAddr, ((Length - Length1) >> 12), Size_4KB); + } + + /* Erase 256B */ + if(Length0)//front + { + ROM_ERASE(Addr0, (Length0 >> 8), Size_256B); + } + + if(Length1)//back + { + ROM_ERASE(Addr1, (Length1 >> 8), Size_256B); + } + + FLASH->CTLR |= CR_FLOCK_Set; + FLASH->CTLR |= CR_LOCK_Set; + + return status; +} + +/********************************************************************* + * @fn FLASH_ROM_WRITE + * + * @brief Writes a specified FLASH . + * + * @param StartAddr - Writes Flash start address(StartAddr%256 == 0). + * Length - Writes Flash start Length(Length%256 == 0). + * pbuf - Writes Flash value buffer. + * + * @return FLASH Status - The returned value can be: FLASH_ADR_RANGE_ERROR, + * FLASH_ALIGN_ERROR, FLASH_OP_RANGE_ERROR or FLASH_COMPLETE. + */ +FLASH_Status FLASH_ROM_WRITE(uint32_t StartAddr, uint32_t *pbuf, uint32_t Length) +{ + uint32_t i; + uint8_t size; + + FLASH_Status status = FLASH_COMPLETE; + + if((StartAddr < ValidAddrStart) || (StartAddr >= ValidAddrEnd)) + { + return FLASH_ADR_RANGE_ERROR; + } + + if((StartAddr + Length) > ValidAddrEnd) + { + return FLASH_OP_RANGE_ERROR; + } + + if((StartAddr & (Size_256B-1)) || (Length & (Size_256B-1)) || (Length == 0)) + { + return FLASH_ALIGN_ERROR; + } + + i = Length >> 8; + + /* Authorize the FPEC of Bank1 Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; + + /* Fast program mode unlock */ + FLASH->MODEKEYR = FLASH_KEY1; + FLASH->MODEKEYR = FLASH_KEY2; + + do{ + FLASH->CTLR |= CR_PAGE_PG; + while(FLASH->STATR & SR_BSY) + ; + while(FLASH->STATR & SR_WR_BSY) + ; + size = 64; + while(size) + { + *(uint32_t *)StartAddr = *(uint32_t *)pbuf; + StartAddr += 4; + pbuf += 1; + size -= 1; + while(FLASH->STATR & SR_WR_BSY) + ; + } + + FLASH->CTLR |= CR_PG_STRT; + while(FLASH->STATR & SR_BSY) + ; + FLASH->CTLR &= ~CR_PAGE_PG; + }while(--i); + + FLASH->CTLR |= CR_FLOCK_Set; + FLASH->CTLR |= CR_LOCK_Set; + + return status; +} + diff --git a/gat_stand_fw/periph/src/ch32v20x_gpio.c b/gat_stand_fw/periph/src/ch32v20x_gpio.c new file mode 100644 index 0000000..675552e --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_gpio.c @@ -0,0 +1,1027 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_gpio.c + * Author : WCH + * Version : V1.0.0 + * Date : 2024/05/06 + * Description : This file provides all the GPIO firmware functions. + ********************************************************************************* + * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. + * Attention: This software (modified or not) and binary are used for + * microcontroller manufactured by Nanjing Qinheng Microelectronics. + *******************************************************************************/ +#include "ch32v20x_gpio.h" +#include "ch32v20x_rcc.h" + +/* MASK */ +#define ECR_PORTPINCONFIG_MASK ((uint16_t)0xFF80) +#define LSB_MASK ((uint16_t)0xFFFF) +#define DBGAFR_POSITION_MASK ((uint32_t)0x000F0000) +#define DBGAFR_SWJCFG_MASK ((uint32_t)0xF0FFFFFF) +#define DBGAFR_LOCATION_MASK ((uint32_t)0x00200000) +#define DBGAFR_NUMBITS_MASK ((uint32_t)0x00100000) + +#if defined (CH32V20x_D6) +uint8_t MCU_Version = 0; +#endif + +/********************************************************************* + * @fn GPIO_DeInit + * + * @brief Deinitializes the GPIOx peripheral registers to their default + * reset values. + * + * @param GPIOx - where x can be (A..G) to select the GPIO peripheral. + * + * @return none + */ +void GPIO_DeInit(GPIO_TypeDef *GPIOx) +{ + if(GPIOx == GPIOA) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE); + } + else if(GPIOx == GPIOB) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE); + } + else if(GPIOx == GPIOC) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE); + } + else if(GPIOx == GPIOD) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE); + } + else if(GPIOx == GPIOE) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE); + } +} + +/********************************************************************* + * @fn GPIO_AFIODeInit + * + * @brief Deinitializes the Alternate Functions (remap, event control + * and EXTI configuration) registers to their default reset values. + * + * @return none + */ +void GPIO_AFIODeInit(void) +{ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE); +} + +/********************************************************************* + * @fn GPIO_Init + * + * @brief GPIOx - where x can be (A..G) to select the GPIO peripheral. + * + * @param GPIO_InitStruct - pointer to a GPIO_InitTypeDef structure that + * contains the configuration information for the specified GPIO peripheral. + * + * @return none + */ +void GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_InitStruct) +{ + uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00; + uint32_t tmpreg = 0x00, pinmask = 0x00; + + currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F); + + if((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00) + { + currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed; + } +#if defined (CH32V20x_D6) + if(((*(uint32_t *) 0x40022030) & 0x0F000000) == 0) + { + MCU_Version = 1; + } + + if((GPIOx == GPIOC) && MCU_Version){ + GPIO_InitStruct->GPIO_Pin = GPIO_InitStruct->GPIO_Pin >> 13; + } + +#endif + if(((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00) + { + tmpreg = GPIOx->CFGLR; + + for(pinpos = 0x00; pinpos < 0x08; pinpos++) + { + pos = ((uint32_t)0x01) << pinpos; + currentpin = (GPIO_InitStruct->GPIO_Pin) & pos; + + if(currentpin == pos) + { + pos = pinpos << 2; + pinmask = ((uint32_t)0x0F) << pos; + tmpreg &= ~pinmask; + tmpreg |= (currentmode << pos); + + if(GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) + { + GPIOx->BCR = (((uint32_t)0x01) << pinpos); + } + else + { + if(GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) + { + GPIOx->BSHR = (((uint32_t)0x01) << pinpos); + } + } + } + } + GPIOx->CFGLR = tmpreg; + } + + if(GPIO_InitStruct->GPIO_Pin > 0x00FF) + { + tmpreg = GPIOx->CFGHR; + + for(pinpos = 0x00; pinpos < 0x08; pinpos++) + { + pos = (((uint32_t)0x01) << (pinpos + 0x08)); + currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos); + + if(currentpin == pos) + { + pos = pinpos << 2; + pinmask = ((uint32_t)0x0F) << pos; + tmpreg &= ~pinmask; + tmpreg |= (currentmode << pos); + + if(GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) + { + GPIOx->BCR = (((uint32_t)0x01) << (pinpos + 0x08)); + } + + if(GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) + { + GPIOx->BSHR = (((uint32_t)0x01) << (pinpos + 0x08)); + } + } + } + GPIOx->CFGHR = tmpreg; + } +} + +/********************************************************************* + * @fn GPIO_StructInit + * + * @brief Fills each GPIO_InitStruct member with its default + * + * @param GPIO_InitStruct - pointer to a GPIO_InitTypeDef structure + * which will be initialized. + * + * @return none + */ +void GPIO_StructInit(GPIO_InitTypeDef *GPIO_InitStruct) +{ + GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All; + GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING; +} + +/********************************************************************* + * @fn GPIO_ReadInputDataBit + * + * @brief GPIOx - where x can be (A..G) to select the GPIO peripheral. + * + * @param GPIO_Pin - specifies the port bit to read. + * This parameter can be GPIO_Pin_x where x can be (0..15). + * + * @return The input port pin value. + */ +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + +#if defined (CH32V20x_D6) + if((GPIOx == GPIOC) && MCU_Version){ + GPIO_Pin = GPIO_Pin >> 13; + } + +#endif + + if((GPIOx->INDR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn GPIO_ReadInputData + * + * @brief Reads the specified GPIO input data port. + * + * @param GPIOx - where x can be (A..G) to select the GPIO peripheral. + * + * @return The output port pin value. + */ +uint16_t GPIO_ReadInputData(GPIO_TypeDef *GPIOx) +{ + uint16_t val; + +#if defined (CH32V20x_D6) + if((GPIOx == GPIOC) && MCU_Version){ + val = ( uint16_t )(GPIOx->INDR << 13); + } + else{ + val = ( uint16_t )GPIOx->INDR; + } + +#else + val = ( uint16_t )GPIOx->INDR; +#endif + +return ( val ); +} + +/********************************************************************* + * @fn GPIO_ReadOutputDataBit + * + * @brief Reads the specified output data port bit. + * + * @param GPIOx - where x can be (A..G) to select the GPIO peripheral. + * GPIO_Pin - specifies the port bit to read. + * This parameter can be GPIO_Pin_x where x can be (0..15). + * + * @return none + */ +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + +#if defined (CH32V20x_D6) + if((GPIOx == GPIOC) && MCU_Version){ + GPIO_Pin = GPIO_Pin >> 13; + } + +#endif + + if((GPIOx->OUTDR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn GPIO_ReadOutputData + * + * @brief Reads the specified GPIO output data port. + * + * @param GPIOx - where x can be (A..G) to select the GPIO peripheral. + * + * @return GPIO output port pin value. + */ +uint16_t GPIO_ReadOutputData(GPIO_TypeDef *GPIOx) +{ + uint16_t val; + +#if defined (CH32V20x_D6) + if((GPIOx == GPIOC) && MCU_Version){ + val = ( uint16_t )(GPIOx->OUTDR << 13); + } + else{ + val = ( uint16_t )GPIOx->OUTDR; + } + +#else + val = ( uint16_t )GPIOx->OUTDR; +#endif + + return ( val ); +} + +/********************************************************************* + * @fn GPIO_SetBits + * + * @brief Sets the selected data port bits. + * + * @param GPIOx - where x can be (A..G) to select the GPIO peripheral. + * GPIO_Pin - specifies the port bits to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * + * @return none + */ +void GPIO_SetBits(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ +#if defined (CH32V20x_D6) + if((GPIOx == GPIOC) && MCU_Version){ + GPIO_Pin = GPIO_Pin >> 13; + } + +#endif + + GPIOx->BSHR = GPIO_Pin; +} + +/********************************************************************* + * @fn GPIO_ResetBits + * + * @brief Clears the selected data port bits. + * + * @param GPIOx - where x can be (A..G) to select the GPIO peripheral. + * GPIO_Pin - specifies the port bits to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * + * @return none + */ +void GPIO_ResetBits(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ +#if defined (CH32V20x_D6) + if((GPIOx == GPIOC) && MCU_Version){ + GPIO_Pin = GPIO_Pin >> 13; + } + +#endif + + GPIOx->BCR = GPIO_Pin; +} + +/********************************************************************* + * @fn GPIO_WriteBit + * + * @brief Sets or clears the selected data port bit. + * + * @param GPIO_Pin - specifies the port bit to be written. + * This parameter can be one of GPIO_Pin_x where x can be (0..15). + * BitVal - specifies the value to be written to the selected bit. + * Bit_RESET - to clear the port pin. + * Bit_SET - to set the port pin. + * + * @return none + */ +void GPIO_WriteBit(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, BitAction BitVal) +{ +#if defined (CH32V20x_D6) + if((GPIOx == GPIOC) && MCU_Version){ + GPIO_Pin = GPIO_Pin >> 13; + } + +#endif + + if(BitVal != Bit_RESET) + { + GPIOx->BSHR = GPIO_Pin; + } + else + { + GPIOx->BCR = GPIO_Pin; + } +} + +/********************************************************************* + * @fn GPIO_Write + * + * @brief Writes data to the specified GPIO data port. + * + * @param GPIOx - where x can be (A..G) to select the GPIO peripheral. + * PortVal - specifies the value to be written to the port output data register. + * + * @return none + */ +void GPIO_Write(GPIO_TypeDef *GPIOx, uint16_t PortVal) +{ +#if defined (CH32V20x_D6) + if((GPIOx == GPIOC) && MCU_Version){ + PortVal = PortVal >> 13; + } + +#endif + + GPIOx->OUTDR = PortVal; +} + +/********************************************************************* + * @fn GPIO_PinLockConfig + * + * @brief Locks GPIO Pins configuration registers. + * + * @param GPIOx - where x can be (A..G) to select the GPIO peripheral. + * GPIO_Pin - specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * + * @return none + */ +void GPIO_PinLockConfig(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint32_t tmp = 0x00010000; + +#if defined (CH32V20x_D6) + if((GPIOx == GPIOC) && MCU_Version){ + GPIO_Pin = GPIO_Pin >> 13; + } + +#endif + + tmp |= GPIO_Pin; + GPIOx->LCKR = tmp; + GPIOx->LCKR = GPIO_Pin; + GPIOx->LCKR = tmp; + tmp = GPIOx->LCKR; + tmp = GPIOx->LCKR; +} + +/********************************************************************* + * @fn GPIO_EventOutputConfig + * + * @brief Selects the GPIO pin used as Event output. + * + * @param GPIO_PortSource - selects the GPIO port to be used as source + * for Event output. + * This parameter can be GPIO_PortSourceGPIOx where x can be (A..E). + * GPIO_PinSource - specifies the pin for the Event output. + * This parameter can be GPIO_PinSourcex where x can be (0..15). + * + * @return none + */ +void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) +{ + uint32_t tmpreg = 0x00; + + tmpreg = AFIO->ECR; + tmpreg &= ECR_PORTPINCONFIG_MASK; + tmpreg |= (uint32_t)GPIO_PortSource << 0x04; + tmpreg |= GPIO_PinSource; + AFIO->ECR = tmpreg; +} + +/********************************************************************* + * @fn GPIO_EventOutputCmd + * + * @brief Enables or disables the Event Output. + * + * @param NewState - ENABLE or DISABLE. + * + * @return none + */ +void GPIO_EventOutputCmd(FunctionalState NewState) +{ + if(NewState) + { + AFIO->ECR |= (1 << 7); + } + else + { + AFIO->ECR &= ~(1 << 7); + } +} + +/********************************************************************* + * @fn GPIO_PinRemapConfig + * + * @brief Changes the mapping of the specified pin. + * + * @param GPIO_Remap - selects the pin to remap. + * GPIO_Remap_SPI1 - SPI1 Alternate Function mapping + * GPIO_Remap_I2C1 - I2C1 Alternate Function mapping + * GPIO_Remap_USART1 - USART1 Alternate Function mapping + * GPIO_Remap_USART2 - USART2 Alternate Function mapping + * GPIO_PartialRemap_USART3 - USART3 Partial Alternate Function mapping + * GPIO_FullRemap_USART3 - USART3 Full Alternate Function mapping + * GPIO_PartialRemap_TIM1 - TIM1 Partial Alternate Function mapping + * GPIO_FullRemap_TIM1 - TIM1 Full Alternate Function mapping + * GPIO_PartialRemap1_TIM2 - TIM2 Partial1 Alternate Function mapping + * GPIO_PartialRemap2_TIM2 - TIM2 Partial2 Alternate Function mapping + * GPIO_FullRemap_TIM2 - TIM2 Full Alternate Function mapping + * GPIO_PartialRemap_TIM3 - TIM3 Partial Alternate Function mapping + * GPIO_FullRemap_TIM3 - TIM3 Full Alternate Function mapping + * GPIO_Remap_TIM4 - TIM4 Alternate Function mapping + * GPIO_Remap1_CAN1 - CAN1 Alternate Function mapping + * GPIO_Remap2_CAN1 - CAN1 Alternate Function mapping + * GPIO_Remap_PD01 - PD01 Alternate Function mapping + * GPIO_Remap_ADC1_ETRGINJ - ADC1 External Trigger Injected Conversion remapping + * GPIO_Remap_ADC1_ETRGREG - ADC1 External Trigger Regular Conversion remapping + * GPIO_Remap_ADC2_ETRGINJ - ADC2 External Trigger Injected Conversion remapping + * GPIO_Remap_ADC2_ETRGREG - ADC2 External Trigger Regular Conversion remapping + * GPIO_Remap_ETH - Ethernet remapping + * GPIO_Remap_CAN2 - CAN2 remapping + * GPIO_Remap_MII_RMII_SEL - MII or RMII selection + * GPIO_Remap_SWJ_Disable - Full SWJ Disabled + * GPIO_Remap_TIM2ITR1_PTP_SOF - Ethernet PTP output or USB OTG SOF (Start of Frame) connected + * to TIM2 Internal Trigger 1 for calibration + * GPIO_Remap_TIM2ITR1_PTP_SOF - Ethernet PTP output or USB OTG SOF (Start of Frame) + * GPIO_Remap_TIM8 - TIM8 Alternate Function mapping + * GPIO_PartialRemap_TIM9 - TIM9 Partial Alternate Function mapping + * GPIO_FullRemap_TIM9 - TIM9 Full Alternate Function mapping + * GPIO_PartialRemap_TIM10 - TIM10 Partial Alternate Function mapping + * GPIO_FullRemap_TIM10 - TIM10 Full Alternate Function mapping + * GPIO_Remap_FSMC_NADV - FSMC_NADV Alternate Function mapping + * GPIO_PartialRemap_USART4 - USART4 Partial Alternate Function mapping + * GPIO_FullRemap_USART4 - USART4 Full Alternate Function mapping + * GPIO_PartialRemap_USART5 - USART5 Partial Alternate Function mapping + * GPIO_FullRemap_USART5 - USART5 Full Alternate Function mapping + * GPIO_PartialRemap_USART6 - USART6 Partial Alternate Function mapping + * GPIO_FullRemap_USART6 - USART6 Full Alternate Function mapping + * GPIO_PartialRemap_USART7 - USART7 Partial Alternate Function mapping + * GPIO_FullRemap_USART7 - USART7 Full Alternate Function mapping + * GPIO_PartialRemap_USART8 - USART8 Partial Alternate Function mapping + * GPIO_FullRemap_USART8 - USART8 Full Alternate Function mapping + * GPIO_Remap_USART1_HighBit - USART1 Alternate Function mapping high bit + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState) +{ + uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00; + + if((GPIO_Remap & 0x80000000) == 0x80000000) + { + tmpreg = AFIO->PCFR2; + } + else + { + tmpreg = AFIO->PCFR1; + + if(((*(uint32_t *) 0x40022030) & 0x0F000000) == 0){ + tmpreg = ((tmpreg>>1)&0xFFFFE000)|(tmpreg&0x00001FFF); + } + + } + + tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10; + tmp = GPIO_Remap & LSB_MASK; + + /* Clear bit */ + if((GPIO_Remap & 0x80000000) == 0x80000000) + { /* PCFR2 */ + if((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) /* [31:16] 2bit */ + { + tmp1 = ((uint32_t)0x03) << (tmpmask + 0x10); + tmpreg &= ~tmp1; + } + else if((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK) /* [15:0] 2bit */ + { + tmp1 = ((uint32_t)0x03) << tmpmask; + tmpreg &= ~tmp1; + } + else /* [31:0] 1bit */ + { + tmpreg &= ~(tmp << (((GPIO_Remap & 0x7FFFFFFF ) >> 0x15) * 0x10)); + } + } + else + { /* PCFR1 */ + if((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) /* [26:24] 3bit SWD_JTAG */ + { + tmpreg &= DBGAFR_SWJCFG_MASK; + AFIO->PCFR1 &= DBGAFR_SWJCFG_MASK; + } + else if((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK) /* [15:0] 2bit */ + { + tmp1 = ((uint32_t)0x03) << tmpmask; + tmpreg &= ~tmp1; + tmpreg |= ~DBGAFR_SWJCFG_MASK; + } + else /* [31:0] 1bit */ + { + tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15) * 0x10)); + tmpreg |= ~DBGAFR_SWJCFG_MASK; + } + } + + /* Set bit */ + if(NewState != DISABLE) + { + tmpreg |= (tmp << (((GPIO_Remap & 0x7FFFFFFF )>> 0x15) * 0x10)); + } + + if((GPIO_Remap & 0x80000000) == 0x80000000) + { + AFIO->PCFR2 = tmpreg; + } + else + { + AFIO->PCFR1 = tmpreg; + } +} + +/********************************************************************* + * @fn GPIO_EXTILineConfig + * + * @brief Selects the GPIO pin used as EXTI Line. + * + * @param GPIO_PortSource - selects the GPIO port to be used as source for EXTI lines. + * This parameter can be GPIO_PortSourceGPIOx where x can be (A..G). + * GPIO_PinSource - specifies the EXTI line to be configured. + * This parameter can be GPIO_PinSourcex where x can be (0..15). + * + * @return none + */ +void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) +{ + uint32_t tmp = 0x00; + + tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)); + AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp; + AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03))); +} + +/********************************************************************* + * @fn GPIO_ETH_MediaInterfaceConfig + * + * @brief Selects the Ethernet media interface. + * + * @param GPIO_ETH_MediaInterface - specifies the Media Interface mode. + * GPIO_ETH_MediaInterface_MII - MII mode + * GPIO_ETH_MediaInterface_RMII - RMII mode + * + * @return none + */ +void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface) +{ + if(GPIO_ETH_MediaInterface) + { + AFIO->PCFR1 |= (1 << 23); + } + else + { + AFIO->PCFR1 &= ~(1 << 23); + } +} + +/********************************************************************* + * @fn GPIO_IPD_Unused + * + * @brief Configure unused GPIO as input pull-up. + * + * @param none + * + * @return none + */ +void GPIO_IPD_Unused(void) +{ + GPIO_InitTypeDef GPIO_InitStructure = {0}; + uint32_t chip = 0; + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB \ + | RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOD|RCC_APB2Periph_AFIO,ENABLE); + chip = *( uint32_t * )0x1FFFF704 & (~0x000000F0); + switch(chip) + { +#ifdef CH32V20x_D6 + case 0x20370500: //CH32V203F6P6 + { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOA, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0\ + |GPIO_Pin_3|GPIO_Pin_4\ + |GPIO_Pin_5|GPIO_Pin_6\ + |GPIO_Pin_7|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12|GPIO_Pin_13\ + |GPIO_Pin_14|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6|GPIO_Pin_7\ + |GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12|GPIO_Pin_13\ + |GPIO_Pin_14|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOC, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } + case 0x203A0500: //CH32V203F8P6 + { + GPIO_PinRemapConfig(GPIO_Remap_PD01, ENABLE); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11|GPIO_Pin_12\ + |GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOA, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1\ + |GPIO_Pin_3|GPIO_Pin_4\ + |GPIO_Pin_5|GPIO_Pin_8\ + |GPIO_Pin_9|GPIO_Pin_10\ + |GPIO_Pin_11|GPIO_Pin_12; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6|GPIO_Pin_7\ + |GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12|GPIO_Pin_13\ + |GPIO_Pin_14|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOC, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } + case 0x203E0500: //CH32V203F8U6 + { + GPIO_PinRemapConfig(GPIO_Remap_PD01, ENABLE); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOA, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6|GPIO_Pin_7\ + |GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_12|GPIO_Pin_13; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6|GPIO_Pin_7\ + |GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12|GPIO_Pin_13\ + |GPIO_Pin_14|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOC, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } + case 0x20360500: //CH32V203G6U6 + { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOA, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12|GPIO_Pin_13\ + |GPIO_Pin_14|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6|GPIO_Pin_7\ + |GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12|GPIO_Pin_13\ + |GPIO_Pin_14|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOC, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } + case 0x203B0500: //CH32V203G8R6 + { + GPIO_PinRemapConfig(GPIO_Remap_PD01, ENABLE); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOA, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_9; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6|GPIO_Pin_7\ + |GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12|GPIO_Pin_13\ + |GPIO_Pin_14|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOC, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } + case 0x20350500: //CH32V203K6T6 + { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12|GPIO_Pin_13\ + |GPIO_Pin_14|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6|GPIO_Pin_7\ + |GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12|GPIO_Pin_13\ + |GPIO_Pin_14|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOC, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } + case 0x20320500: //CH32V203K8T6 + { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12|GPIO_Pin_13\ + |GPIO_Pin_14|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6|GPIO_Pin_7\ + |GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12|GPIO_Pin_13\ + |GPIO_Pin_14|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOC, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } + case 0x20330500: //CH32V203C6T6 + { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6|GPIO_Pin_7\ + |GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOC, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } + case 0x20310500: //CH32V203C8T6 + { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6|GPIO_Pin_7\ + |GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOC, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } + case 0x20300500: //CH32V203C8U6 + { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6|GPIO_Pin_7\ + |GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOC, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } +#elif defined(CH32V20x_D8) + case 0x2034050C: //CH32V203RBT6 + { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3|GPIO_Pin_4\ + |GPIO_Pin_5|GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } +#elif defined(CH32V20x_D8W) + case 0x2083050C: //CH32V208GBU6 + { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOA, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_9|GPIO_Pin_10\ + |GPIO_Pin_11|GPIO_Pin_12\ + |GPIO_Pin_13|GPIO_Pin_14\ + |GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOB, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12|GPIO_Pin_13; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOC, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } + case 0x2082050C: //CH32V208CBU6 + { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1\ + |GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6|GPIO_Pin_7\ + |GPIO_Pin_8|GPIO_Pin_9\ + |GPIO_Pin_10|GPIO_Pin_11\ + |GPIO_Pin_12; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOC, &GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2|GPIO_Pin_3\ + |GPIO_Pin_4|GPIO_Pin_5\ + |GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } + case 0x2081050C: //CH32V208RBT6 + { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3|GPIO_Pin_4\ + |GPIO_Pin_5|GPIO_Pin_6; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(GPIOD, &GPIO_InitStructure); + break; + } +#endif + default: + { + break; + } + } +} \ No newline at end of file diff --git a/gat_stand_fw/periph/src/ch32v20x_i2c.c b/gat_stand_fw/periph/src/ch32v20x_i2c.c new file mode 100644 index 0000000..547ef8e --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_i2c.c @@ -0,0 +1,1012 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_i2c.c + * Author : WCH + * Version : V1.0.0 + * Date : 2023/12/29 + * Description : This file provides all the I2C firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_i2c.h" +#include "ch32v20x_rcc.h" + +/* I2C SPE mask */ +#define CTLR1_PE_Set ((uint16_t)0x0001) +#define CTLR1_PE_Reset ((uint16_t)0xFFFE) + +/* I2C START mask */ +#define CTLR1_START_Set ((uint16_t)0x0100) +#define CTLR1_START_Reset ((uint16_t)0xFEFF) + +/* I2C STOP mask */ +#define CTLR1_STOP_Set ((uint16_t)0x0200) +#define CTLR1_STOP_Reset ((uint16_t)0xFDFF) + +/* I2C ACK mask */ +#define CTLR1_ACK_Set ((uint16_t)0x0400) +#define CTLR1_ACK_Reset ((uint16_t)0xFBFF) + +/* I2C ENGC mask */ +#define CTLR1_ENGC_Set ((uint16_t)0x0040) +#define CTLR1_ENGC_Reset ((uint16_t)0xFFBF) + +/* I2C SWRST mask */ +#define CTLR1_SWRST_Set ((uint16_t)0x8000) +#define CTLR1_SWRST_Reset ((uint16_t)0x7FFF) + +/* I2C PEC mask */ +#define CTLR1_PEC_Set ((uint16_t)0x1000) +#define CTLR1_PEC_Reset ((uint16_t)0xEFFF) + +/* I2C ENPEC mask */ +#define CTLR1_ENPEC_Set ((uint16_t)0x0020) +#define CTLR1_ENPEC_Reset ((uint16_t)0xFFDF) + +/* I2C ENARP mask */ +#define CTLR1_ENARP_Set ((uint16_t)0x0010) +#define CTLR1_ENARP_Reset ((uint16_t)0xFFEF) + +/* I2C NOSTRETCH mask */ +#define CTLR1_NOSTRETCH_Set ((uint16_t)0x0080) +#define CTLR1_NOSTRETCH_Reset ((uint16_t)0xFF7F) + +/* I2C registers Masks */ +#define CTLR1_CLEAR_Mask ((uint16_t)0xFBF5) + +/* I2C DMAEN mask */ +#define CTLR2_DMAEN_Set ((uint16_t)0x0800) +#define CTLR2_DMAEN_Reset ((uint16_t)0xF7FF) + +/* I2C LAST mask */ +#define CTLR2_LAST_Set ((uint16_t)0x1000) +#define CTLR2_LAST_Reset ((uint16_t)0xEFFF) + +/* I2C FREQ mask */ +#define CTLR2_FREQ_Reset ((uint16_t)0xFFC0) + +/* I2C ADD0 mask */ +#define OADDR1_ADD0_Set ((uint16_t)0x0001) +#define OADDR1_ADD0_Reset ((uint16_t)0xFFFE) + +/* I2C ENDUAL mask */ +#define OADDR2_ENDUAL_Set ((uint16_t)0x0001) +#define OADDR2_ENDUAL_Reset ((uint16_t)0xFFFE) + +/* I2C ADD2 mask */ +#define OADDR2_ADD2_Reset ((uint16_t)0xFF01) + +/* I2C F/S mask */ +#define CKCFGR_FS_Set ((uint16_t)0x8000) + +/* I2C CCR mask */ +#define CKCFGR_CCR_Set ((uint16_t)0x0FFF) + +/* I2C FLAG mask */ +#define FLAG_Mask ((uint32_t)0x00FFFFFF) + +/* I2C Interrupt Enable mask */ +#define ITEN_Mask ((uint32_t)0x07000000) + +/********************************************************************* + * @fn I2C_DeInit + * + * @brief Deinitializes the I2Cx peripheral registers to their default + * reset values. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * + * @return none + */ +void I2C_DeInit(I2C_TypeDef *I2Cx) +{ + if(I2Cx == I2C1) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE); + } + else + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE); + } +} + +/********************************************************************* + * @fn I2C_Init + * + * @brief Initializes the I2Cx peripheral according to the specified + * parameters in the I2C_InitStruct. + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * I2C_InitStruct - pointer to a I2C_InitTypeDef structure that + * contains the configuration information for the specified I2C peripheral. + * + * @return none + */ +void I2C_Init(I2C_TypeDef *I2Cx, I2C_InitTypeDef *I2C_InitStruct) +{ + uint16_t tmpreg = 0, freqrange = 0; + uint16_t result = 0x04; + uint32_t pclk1 = 8000000; + + RCC_ClocksTypeDef rcc_clocks; + + tmpreg = I2Cx->CTLR2; + tmpreg &= CTLR2_FREQ_Reset; + RCC_GetClocksFreq(&rcc_clocks); + pclk1 = rcc_clocks.PCLK1_Frequency; + freqrange = (uint16_t)(pclk1 / 1000000); + tmpreg |= freqrange; + if(freqrange >= 60) + { + freqrange = 60; + } + I2Cx->CTLR2 = tmpreg; + + I2Cx->CTLR1 &= CTLR1_PE_Reset; + tmpreg = 0; + + if(I2C_InitStruct->I2C_ClockSpeed <= 100000) + { + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1)); + + if(result < 0x04) + { + result = 0x04; + } + + tmpreg |= result; + I2Cx->RTR = freqrange + 1; + } + else + { + if(I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2) + { + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3)); + } + else + { + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25)); + result |= I2C_DutyCycle_16_9; + } + + if((result & CKCFGR_CCR_Set) == 0) + { + result |= (uint16_t)0x0001; + } + + tmpreg |= (uint16_t)(result | CKCFGR_FS_Set); + I2Cx->RTR = (uint16_t)(((freqrange * (uint16_t)300) / (uint16_t)1000) + (uint16_t)1); + } + + I2Cx->CKCFGR = tmpreg; + I2Cx->CTLR1 |= CTLR1_PE_Set; + + tmpreg = I2Cx->CTLR1; + tmpreg &= CTLR1_CLEAR_Mask; + tmpreg |= (uint16_t)((uint32_t)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack); + I2Cx->CTLR1 = tmpreg; + + I2Cx->OADDR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1); +} + +/********************************************************************* + * @fn I2C_StructInit + * + * @brief Fills each I2C_InitStruct member with its default value. + * + * @param I2C_InitStruct - pointer to an I2C_InitTypeDef structure which + * will be initialized. + * + * @return none + */ +void I2C_StructInit(I2C_InitTypeDef *I2C_InitStruct) +{ + I2C_InitStruct->I2C_ClockSpeed = 5000; + I2C_InitStruct->I2C_Mode = I2C_Mode_I2C; + I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2; + I2C_InitStruct->I2C_OwnAddress1 = 0; + I2C_InitStruct->I2C_Ack = I2C_Ack_Disable; + I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; +} + +/********************************************************************* + * @fn I2C_Cmd + * + * @brief Enables or disables the specified I2C peripheral. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_Cmd(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->CTLR1 |= CTLR1_PE_Set; + } + else + { + I2Cx->CTLR1 &= CTLR1_PE_Reset; + } +} + +/********************************************************************* + * @fn I2C_DMACmd + * + * @brief Enables or disables the specified I2C DMA requests. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_DMACmd(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->CTLR2 |= CTLR2_DMAEN_Set; + } + else + { + I2Cx->CTLR2 &= CTLR2_DMAEN_Reset; + } +} + +/********************************************************************* + * @fn I2C_DMALastTransferCmd + * + * @brief Specifies if the next DMA transfer will be the last one. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_DMALastTransferCmd(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->CTLR2 |= CTLR2_LAST_Set; + } + else + { + I2Cx->CTLR2 &= CTLR2_LAST_Reset; + } +} + +/********************************************************************* + * @fn I2C_GenerateSTART + * + * @brief Generates I2Cx communication START condition. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_GenerateSTART(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->CTLR1 |= CTLR1_START_Set; + } + else + { + I2Cx->CTLR1 &= CTLR1_START_Reset; + } +} + +/********************************************************************* + * @fn I2C_GenerateSTOP + * + * @brief Generates I2Cx communication STOP condition. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_GenerateSTOP(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->CTLR1 |= CTLR1_STOP_Set; + } + else + { + I2Cx->CTLR1 &= CTLR1_STOP_Reset; + } +} + +/********************************************************************* + * @fn I2C_AcknowledgeConfig + * + * @brief Enables or disables the specified I2C acknowledge feature. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_AcknowledgeConfig(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->CTLR1 |= CTLR1_ACK_Set; + } + else + { + I2Cx->CTLR1 &= CTLR1_ACK_Reset; + } +} + +/********************************************************************* + * @fn I2C_OwnAddress2Config + * + * @brief Configures the specified I2C own address2. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * Address - specifies the 7bit I2C own address2. + * + * @return none + */ +void I2C_OwnAddress2Config(I2C_TypeDef *I2Cx, uint8_t Address) +{ + uint16_t tmpreg = 0; + + tmpreg = I2Cx->OADDR2; + tmpreg &= OADDR2_ADD2_Reset; + tmpreg |= (uint16_t)((uint16_t)Address & (uint16_t)0x00FE); + I2Cx->OADDR2 = tmpreg; +} + +/********************************************************************* + * @fn I2C_DualAddressCmd + * + * @brief Enables or disables the specified I2C dual addressing mode. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_DualAddressCmd(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->OADDR2 |= OADDR2_ENDUAL_Set; + } + else + { + I2Cx->OADDR2 &= OADDR2_ENDUAL_Reset; + } +} + +/********************************************************************* + * @fn I2C_GeneralCallCmd + * + * @brief Enables or disables the specified I2C general call feature. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_GeneralCallCmd(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->CTLR1 |= CTLR1_ENGC_Set; + } + else + { + I2Cx->CTLR1 &= CTLR1_ENGC_Reset; + } +} + +/********************************************************************* + * @fn I2C_ITConfig + * + * @brief Enables or disables the specified I2C interrupts. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * I2C_IT - specifies the I2C interrupts sources to be enabled or disabled. + * I2C_IT_BUF - Buffer interrupt mask. + * I2C_IT_EVT - Event interrupt mask. + * I2C_IT_ERR - Error interrupt mask. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_ITConfig(I2C_TypeDef *I2Cx, uint16_t I2C_IT, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->CTLR2 |= I2C_IT; + } + else + { + I2Cx->CTLR2 &= (uint16_t)~I2C_IT; + } +} + +/********************************************************************* + * @fn I2C_SendData + * + * @brief Sends a data byte through the I2Cx peripheral. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * Data - Byte to be transmitted. + * + * @return none + */ +void I2C_SendData(I2C_TypeDef *I2Cx, uint8_t Data) +{ + I2Cx->DATAR = Data; +} + +/********************************************************************* + * @fn I2C_ReceiveData + * + * @brief Returns the most recent received data by the I2Cx peripheral. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * + * @return The value of the received data. + */ +uint8_t I2C_ReceiveData(I2C_TypeDef *I2Cx) +{ + return (uint8_t)I2Cx->DATAR; +} + +/********************************************************************* + * @fn I2C_Send7bitAddress + * + * @brief Transmits the address byte to select the slave device. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * Address - specifies the slave address which will be transmitted. + * I2C_Direction - specifies whether the I2C device will be a + * Transmitter or a Receiver. + * I2C_Direction_Transmitter - Transmitter mode. + * I2C_Direction_Receiver - Receiver mode. + * + * @return none + */ +void I2C_Send7bitAddress(I2C_TypeDef *I2Cx, uint8_t Address, uint8_t I2C_Direction) +{ + if(I2C_Direction != I2C_Direction_Transmitter) + { + Address |= OADDR1_ADD0_Set; + } + else + { + Address &= OADDR1_ADD0_Reset; + } + + I2Cx->DATAR = Address; +} + +/********************************************************************* + * @fn I2C_ReadRegister + * + * @brief Reads the specified I2C register and returns its value. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * I2C_Register - specifies the register to read. + * I2C_Register_CTLR1. + * I2C_Register_CTLR2. + * I2C_Register_OADDR1. + * I2C_Register_OADDR2. + * I2C_Register_DATAR. + * I2C_Register_STAR1. + * I2C_Register_STAR2. + * I2C_Register_CKCFGR. + * I2C_Register_RTR. + * + * @return none + */ +uint16_t I2C_ReadRegister(I2C_TypeDef *I2Cx, uint8_t I2C_Register) +{ + __IO uint32_t tmp = 0; + + tmp = (uint32_t)I2Cx; + tmp += I2C_Register; + + return (*(__IO uint16_t *)tmp); +} + +/********************************************************************* + * @fn I2C_SoftwareResetCmd + * + * @brief Enables or disables the specified I2C software reset. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_SoftwareResetCmd(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->CTLR1 |= CTLR1_SWRST_Set; + } + else + { + I2Cx->CTLR1 &= CTLR1_SWRST_Reset; + } +} + +/********************************************************************* + * @fn I2C_NACKPositionConfig + * + * @brief Selects the specified I2C NACK position in master receiver mode. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * I2C_NACKPosition - specifies the NACK position. + * I2C_NACKPosition_Next - indicates that the next byte will be + * the last received byte. + * I2C_NACKPosition_Current - indicates that current byte is the + * last received byte. + * Note- + * This function configures the same bit (POS) as I2C_PECPositionConfig() + * but is intended to be used in I2C mode while I2C_PECPositionConfig() + * is intended to used in SMBUS mode. + * @return none + */ +void I2C_NACKPositionConfig(I2C_TypeDef *I2Cx, uint16_t I2C_NACKPosition) +{ + if(I2C_NACKPosition == I2C_NACKPosition_Next) + { + I2Cx->CTLR1 |= I2C_NACKPosition_Next; + } + else + { + I2Cx->CTLR1 &= I2C_NACKPosition_Current; + } +} + +/********************************************************************* + * @fn I2C_SMBusAlertConfig + * + * @brief Drives the SMBusAlert pin high or low for the specified I2C. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * I2C_SMBusAlert - specifies SMBAlert pin level. + * I2C_SMBusAlert_Low - SMBAlert pin driven low. + * I2C_SMBusAlert_High - SMBAlert pin driven high. + * + * @return none + */ +void I2C_SMBusAlertConfig(I2C_TypeDef *I2Cx, uint16_t I2C_SMBusAlert) +{ + if(I2C_SMBusAlert == I2C_SMBusAlert_Low) + { + I2Cx->CTLR1 |= I2C_SMBusAlert_Low; + } + else + { + I2Cx->CTLR1 &= I2C_SMBusAlert_High; + } +} + +/********************************************************************* + * @fn I2C_TransmitPEC + * + * @brief Enables or disables the specified I2C PEC transfer. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_TransmitPEC(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->CTLR1 |= CTLR1_PEC_Set; + } + else + { + I2Cx->CTLR1 &= CTLR1_PEC_Reset; + } +} + +/********************************************************************* + * @fn I2C_PECPositionConfig + * + * @brief Selects the specified I2C PEC position. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * I2C_PECPosition - specifies the PEC position. + * I2C_PECPosition_Next - indicates that the next byte is PEC. + * I2C_PECPosition_Current - indicates that current byte is PEC. + * + * @return none + */ +void I2C_PECPositionConfig(I2C_TypeDef *I2Cx, uint16_t I2C_PECPosition) +{ + if(I2C_PECPosition == I2C_PECPosition_Next) + { + I2Cx->CTLR1 |= I2C_PECPosition_Next; + } + else + { + I2Cx->CTLR1 &= I2C_PECPosition_Current; + } +} + +/********************************************************************* + * @fn I2C_CalculatePEC + * + * @brief Enables or disables the PEC value calculation of the transferred bytes. + * + * @param I2Cx- where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_CalculatePEC(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->CTLR1 |= CTLR1_ENPEC_Set; + } + else + { + I2Cx->CTLR1 &= CTLR1_ENPEC_Reset; + } +} + +/********************************************************************* + * @fn I2C_GetPEC + * + * @brief Returns the PEC value for the specified I2C. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * + * @return The PEC value. + */ +uint8_t I2C_GetPEC(I2C_TypeDef *I2Cx) +{ + return ((I2Cx->STAR2) >> 8); +} + +/********************************************************************* + * @fn I2C_ARPCmd + * + * @brief Enables or disables the specified I2C ARP. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return The PEC value. + */ +void I2C_ARPCmd(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + I2Cx->CTLR1 |= CTLR1_ENARP_Set; + } + else + { + I2Cx->CTLR1 &= CTLR1_ENARP_Reset; + } +} + +/********************************************************************* + * @fn I2C_StretchClockCmd + * + * @brief Enables or disables the specified I2C Clock stretching. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2C_StretchClockCmd(I2C_TypeDef *I2Cx, FunctionalState NewState) +{ + if(NewState == DISABLE) + { + I2Cx->CTLR1 |= CTLR1_NOSTRETCH_Set; + } + else + { + I2Cx->CTLR1 &= CTLR1_NOSTRETCH_Reset; + } +} + +/********************************************************************* + * @fn I2C_FastModeDutyCycleConfig + * + * @brief Selects the specified I2C fast mode duty cycle. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * I2C_DutyCycle - specifies the fast mode duty cycle. + * I2C_DutyCycle_2 - I2C fast mode Tlow/Thigh = 2. + * I2C_DutyCycle_16_9 - I2C fast mode Tlow/Thigh = 16/9. + * + * @return none + */ +void I2C_FastModeDutyCycleConfig(I2C_TypeDef *I2Cx, uint16_t I2C_DutyCycle) +{ + if(I2C_DutyCycle != I2C_DutyCycle_16_9) + { + I2Cx->CKCFGR &= I2C_DutyCycle_2; + } + else + { + I2Cx->CKCFGR |= I2C_DutyCycle_16_9; + } +} + +/********************************************************************* + * @fn I2C_CheckEvent + * + * @brief Checks whether the last I2Cx Event is equal to the one passed + * as parameter. + * + * @param I2Cx- where x can be 1 or 2 to select the I2C peripheral. + * I2C_EVENT: specifies the event to be checked. + * I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED - EVT1. + * I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED - EVT1. + * I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED - EVT1. + * I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED - EVT1. + * I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED - EVT1. + * I2C_EVENT_SLAVE_BYTE_RECEIVED - EVT2. + * (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF) - EVT2. + * (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL) - EVT2. + * I2C_EVENT_SLAVE_BYTE_TRANSMITTED - EVT3. + * (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF) - EVT3. + * (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL) - EVT3. + * I2C_EVENT_SLAVE_ACK_FAILURE - EVT3_2. + * I2C_EVENT_SLAVE_STOP_DETECTED - EVT4. + * I2C_EVENT_MASTER_MODE_SELECT - EVT5. + * I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED - EVT6. + * I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED - EVT6. + * I2C_EVENT_MASTER_BYTE_RECEIVED - EVT7. + * I2C_EVENT_MASTER_BYTE_TRANSMITTING - EVT8. + * I2C_EVENT_MASTER_BYTE_TRANSMITTED - EVT8_2. + * I2C_EVENT_MASTER_MODE_ADDRESS10 - EVT9. + * + * @return ErrorStatus - READY or NoREADY. + */ +ErrorStatus I2C_CheckEvent(I2C_TypeDef *I2Cx, uint32_t I2C_EVENT) +{ + uint32_t lastevent = 0; + uint32_t flag1 = 0, flag2 = 0; + ErrorStatus status = NoREADY; + + flag1 = I2Cx->STAR1; + flag2 = I2Cx->STAR2; + flag2 = flag2 << 16; + + lastevent = (flag1 | flag2) & FLAG_Mask; + + if((lastevent & I2C_EVENT) == I2C_EVENT) + { + status = READY; + } + else + { + status = NoREADY; + } + + return status; +} + +/********************************************************************* + * @fn I2C_GetLastEvent + * + * @brief Returns the last I2Cx Event. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * + * @return none + */ +uint32_t I2C_GetLastEvent(I2C_TypeDef *I2Cx) +{ + uint32_t lastevent = 0; + uint32_t flag1 = 0, flag2 = 0; + + flag1 = I2Cx->STAR1; + flag2 = I2Cx->STAR2; + flag2 = flag2 << 16; + lastevent = (flag1 | flag2) & FLAG_Mask; + + return lastevent; +} + +/********************************************************************* + * @fn I2C_GetFlagStatus + * + * @brief Checks whether the last I2Cx Event is equal to the one passed + * as parameter. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * I2C_FLAG - specifies the flag to check. + * I2C_FLAG_DUALF - Dual flag (Slave mode). + * I2C_FLAG_SMBHOST - SMBus host header (Slave mode). + * I2C_FLAG_SMBDEFAULT - SMBus default header (Slave mode). + * I2C_FLAG_GENCALL - General call header flag (Slave mode). + * I2C_FLAG_TRA - Transmitter/Receiver flag. + * I2C_FLAG_BUSY - Bus busy flag. + * I2C_FLAG_MSL - Master/Slave flag. + * I2C_FLAG_SMBALERT - SMBus Alert flag. + * I2C_FLAG_TIMEOUT - Timeout or Tlow error flag. + * I2C_FLAG_PECERR - PEC error in reception flag. + * I2C_FLAG_OVR - Overrun/Underrun flag (Slave mode). + * I2C_FLAG_AF - Acknowledge failure flag. + * I2C_FLAG_ARLO - Arbitration lost flag (Master mode). + * I2C_FLAG_BERR - Bus error flag. + * I2C_FLAG_TXE - Data register empty flag (Transmitter). + * I2C_FLAG_RXNE- Data register not empty (Receiver) flag. + * I2C_FLAG_STOPF - Stop detection flag (Slave mode). + * I2C_FLAG_ADD10 - 10-bit header sent flag (Master mode). + * I2C_FLAG_BTF - Byte transfer finished flag. + * I2C_FLAG_ADDR - Address sent flag (Master mode) "ADSL" + * Address matched flag (Slave mode)"ENDA". + * I2C_FLAG_SB - Start bit flag (Master mode). + * + * @return FlagStatus - SET or RESET. + */ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef *I2Cx, uint32_t I2C_FLAG) +{ + FlagStatus bitstatus = RESET; + __IO uint32_t i2creg = 0, i2cxbase = 0; + + i2cxbase = (uint32_t)I2Cx; + i2creg = I2C_FLAG >> 28; + I2C_FLAG &= FLAG_Mask; + + if(i2creg != 0) + { + i2cxbase += 0x14; + } + else + { + I2C_FLAG = (uint32_t)(I2C_FLAG >> 16); + i2cxbase += 0x18; + } + + if(((*(__IO uint32_t *)i2cxbase) & I2C_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn I2C_ClearFlag + * + * @brief Clears the I2Cx's pending flags. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * I2C_FLAG - specifies the flag to clear. + * I2C_FLAG_SMBALERT - SMBus Alert flag. + * I2C_FLAG_TIMEOUT - Timeout or Tlow error flag. + * I2C_FLAG_PECERR - PEC error in reception flag. + * I2C_FLAG_OVR - Overrun/Underrun flag (Slave mode). + * I2C_FLAG_AF - Acknowledge failure flag. + * I2C_FLAG_ARLO - Arbitration lost flag (Master mode). + * I2C_FLAG_BERR - Bus error flag. + * Note- + * - STOPF (STOP detection) is cleared by software sequence: a read operation + * to I2C_STAR1 register (I2C_GetFlagStatus()) followed by a write operation + * to I2C_CTLR1 register (I2C_Cmd() to re-enable the I2C peripheral). + * - ADD10 (10-bit header sent) is cleared by software sequence: a read + * operation to I2C_SATR1 (I2C_GetFlagStatus()) followed by writing the + * second byte of the address in DATAR register. + * - BTF (Byte Transfer Finished) is cleared by software sequence: a read + * operation to I2C_SATR1 register (I2C_GetFlagStatus()) followed by a + * read/write to I2C_DATAR register (I2C_SendData()). + * - ADDR (Address sent) is cleared by software sequence: a read operation to + * I2C_SATR1 register (I2C_GetFlagStatus()) followed by a read operation to + * I2C_SATR2 register ((void)(I2Cx->SR2)). + * - SB (Start Bit) is cleared software sequence: a read operation to I2C_STAR1 + * register (I2C_GetFlagStatus()) followed by a write operation to I2C_DATAR + * register (I2C_SendData()). + * @return none + */ +void I2C_ClearFlag(I2C_TypeDef *I2Cx, uint32_t I2C_FLAG) +{ + uint32_t flagpos = 0; + + flagpos = I2C_FLAG & FLAG_Mask; + I2Cx->STAR1 = (uint16_t)~flagpos; +} + +/********************************************************************* + * @fn I2C_GetITStatus + * + * @brief Checks whether the specified I2C interrupt has occurred or not. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * II2C_IT - specifies the interrupt source to check. + * I2C_IT_SMBALERT - SMBus Alert flag. + * I2C_IT_TIMEOUT - Timeout or Tlow error flag. + * I2C_IT_PECERR - PEC error in reception flag. + * I2C_IT_OVR - Overrun/Underrun flag (Slave mode). + * I2C_IT_AF - Acknowledge failure flag. + * I2C_IT_ARLO - Arbitration lost flag (Master mode). + * I2C_IT_BERR - Bus error flag. + * I2C_IT_TXE - Data register empty flag (Transmitter). + * I2C_IT_RXNE - Data register not empty (Receiver) flag. + * I2C_IT_STOPF - Stop detection flag (Slave mode). + * I2C_IT_ADD10 - 10-bit header sent flag (Master mode). + * I2C_IT_BTF - Byte transfer finished flag. + * I2C_IT_ADDR - Address sent flag (Master mode) "ADSL" Address matched + * flag (Slave mode)"ENDAD". + * I2C_IT_SB - Start bit flag (Master mode). + * + * @return none + */ +ITStatus I2C_GetITStatus(I2C_TypeDef *I2Cx, uint32_t I2C_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + enablestatus = (uint32_t)(((I2C_IT & ITEN_Mask) >> 16) & (I2Cx->CTLR2)); + I2C_IT &= FLAG_Mask; + + if(((I2Cx->STAR1 & I2C_IT) != (uint32_t)RESET) && enablestatus) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn I2C_ClearITPendingBit + * + * @brief Clears the I2Cx interrupt pending bits. + * + * @param I2Cx - where x can be 1 or 2 to select the I2C peripheral. + * I2C_IT - specifies the interrupt pending bit to clear. + * I2C_IT_SMBALERT - SMBus Alert interrupt. + * I2C_IT_TIMEOUT - Timeout or Tlow error interrupt. + * I2C_IT_PECERR - PEC error in reception interrupt. + * I2C_IT_OVR - Overrun/Underrun interrupt (Slave mode). + * I2C_IT_AF - Acknowledge failure interrupt. + * I2C_IT_ARLO - Arbitration lost interrupt (Master mode). + * I2C_IT_BERR - Bus error interrupt. + * Note- + * - STOPF (STOP detection) is cleared by software sequence: a read operation + * to I2C_STAR1 register (I2C_GetITStatus()) followed by a write operation to + * I2C_CTLR1 register (I2C_Cmd() to re-enable the I2C peripheral). + * - ADD10 (10-bit header sent) is cleared by software sequence: a read + * operation to I2C_STAR1 (I2C_GetITStatus()) followed by writing the second + * byte of the address in I2C_DATAR register. + * - BTF (Byte Transfer Finished) is cleared by software sequence: a read + * operation to I2C_STAR1 register (I2C_GetITStatus()) followed by a + * read/write to I2C_DATAR register (I2C_SendData()). + * - ADDR (Address sent) is cleared by software sequence: a read operation to + * I2C_STAR1 register (I2C_GetITStatus()) followed by a read operation to + * I2C_STAR2 register ((void)(I2Cx->SR2)). + * - SB (Start Bit) is cleared by software sequence: a read operation to + * I2C_STAR1 register (I2C_GetITStatus()) followed by a write operation to + * I2C_DATAR register (I2C_SendData()). + * + * @return none + */ +void I2C_ClearITPendingBit(I2C_TypeDef *I2Cx, uint32_t I2C_IT) +{ + uint32_t flagpos = 0; + + flagpos = I2C_IT & FLAG_Mask; + I2Cx->STAR1 = (uint16_t)~flagpos; +} diff --git a/gat_stand_fw/periph/src/ch32v20x_iwdg.c b/gat_stand_fw/periph/src/ch32v20x_iwdg.c new file mode 100644 index 0000000..cc7f2f7 --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_iwdg.c @@ -0,0 +1,123 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_iwdg.c + * Author : WCH + * Version : V1.0.0 + * Date : 2023/12/29 + * Description : This file provides all the IWDG firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_iwdg.h" + +/* CTLR register bit mask */ +#define CTLR_KEY_Reload ((uint16_t)0xAAAA) +#define CTLR_KEY_Enable ((uint16_t)0xCCCC) + +/********************************************************************* + * @fn IWDG_WriteAccessCmd + * + * @brief Enables or disables write access to IWDG_PSCR and IWDG_RLDR registers. + * + * @param WDG_WriteAccess - new state of write access to IWDG_PSCR and + * IWDG_RLDR registers. + * IWDG_WriteAccess_Enable - Enable write access to IWDG_PSCR and + * IWDG_RLDR registers. + * IWDG_WriteAccess_Disable - Disable write access to IWDG_PSCR + * and IWDG_RLDR registers. + * + * @return none + */ +void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess) +{ + IWDG->CTLR = IWDG_WriteAccess; +} + +/********************************************************************* + * @fn IWDG_SetPrescaler + * + * @brief Sets IWDG Prescaler value. + * + * @param IWDG_Prescaler - specifies the IWDG Prescaler value. + * IWDG_Prescaler_4 - IWDG prescaler set to 4. + * IWDG_Prescaler_8 - IWDG prescaler set to 8. + * IWDG_Prescaler_16 - IWDG prescaler set to 16. + * IWDG_Prescaler_32 - IWDG prescaler set to 32. + * IWDG_Prescaler_64 - IWDG prescaler set to 64. + * IWDG_Prescaler_128 - IWDG prescaler set to 128. + * IWDG_Prescaler_256 - IWDG prescaler set to 256. + * + * @return none + */ +void IWDG_SetPrescaler(uint8_t IWDG_Prescaler) +{ + IWDG->PSCR = IWDG_Prescaler; +} + +/********************************************************************* + * @fn IWDG_SetReload + * + * @brief Sets IWDG Reload value. + * + * @param Reload - specifies the IWDG Reload value. + * This parameter must be a number between 0 and 0x0FFF. + * + * @return none + */ +void IWDG_SetReload(uint16_t Reload) +{ + IWDG->RLDR = Reload; +} + +/********************************************************************* + * @fn IWDG_ReloadCounter + * + * @brief Reloads IWDG counter with value defined in the reload register. + * + * @return none + */ +void IWDG_ReloadCounter(void) +{ + IWDG->CTLR = CTLR_KEY_Reload; +} + +/********************************************************************* + * @fn IWDG_Enable + * + * @brief Enables IWDG (write access to IWDG_PSCR and IWDG_RLDR registers disabled). + * + * @return none + */ +void IWDG_Enable(void) +{ + IWDG->CTLR = CTLR_KEY_Enable; + while((RCC->RSTSCKR & 0x2)==RESET); +} + +/********************************************************************* + * @fn IWDG_GetFlagStatus + * + * @brief Checks whether the specified IWDG flag is set or not. + * + * @param IWDG_FLAG - specifies the flag to check. + * IWDG_FLAG_PVU - Prescaler Value Update on going. + * IWDG_FLAG_RVU - Reload Value Update on going. + * + * @return none + */ +FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG) +{ + FlagStatus bitstatus = RESET; + + if((IWDG->STATR & IWDG_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} diff --git a/gat_stand_fw/periph/src/ch32v20x_misc.c b/gat_stand_fw/periph/src/ch32v20x_misc.c new file mode 100644 index 0000000..c1d495a --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_misc.c @@ -0,0 +1,81 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_misc.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the miscellaneous firmware functions . +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_misc.h" + +__IO uint32_t NVIC_Priority_Group = 0; + +/********************************************************************* + * @fn NVIC_PriorityGroupConfig + * + * @brief Configures the priority grouping - pre-emption priority and subpriority. + * + * @param NVIC_PriorityGroup - specifies the priority grouping bits length. + * NVIC_PriorityGroup_0 - 0 bits for pre-emption priority + * 3 bits for subpriority + * NVIC_PriorityGroup_1 - 1 bits for pre-emption priority + * 2 bits for subpriority + * + * @return none + */ +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup) +{ + NVIC_Priority_Group = NVIC_PriorityGroup; +} + +/********************************************************************* + * @fn NVIC_Init + * + * @brief Initializes the NVIC peripheral according to the specified parameters in + * the NVIC_InitStruct. + * + * @param NVIC_InitStruct - pointer to a NVIC_InitTypeDef structure that contains the + * configuration information for the specified NVIC peripheral. + * interrupt nesting enable(CSR-0x804 bit1 = 1) + * NVIC_IRQChannelPreemptionPriority - range from 0 to 1. + * NVIC_IRQChannelSubPriority - range from 0 to 3. + * + * interrupt nesting disable(CSR-0x804 bit1 = 0) + * NVIC_IRQChannelPreemptionPriority - range is 0. + * NVIC_IRQChannelSubPriority - range from 0 to 7. + * + * @return none + */ +void NVIC_Init(NVIC_InitTypeDef *NVIC_InitStruct) +{ +#if (INTSYSCR_INEST == INTSYSCR_INEST_NoEN) + if(NVIC_Priority_Group == NVIC_PriorityGroup_0) + { + NVIC_SetPriority(NVIC_InitStruct->NVIC_IRQChannel, NVIC_InitStruct->NVIC_IRQChannelSubPriority << 4); + } +#else + if(NVIC_Priority_Group == NVIC_PriorityGroup_1) + { + if(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority == 1) + { + NVIC_SetPriority(NVIC_InitStruct->NVIC_IRQChannel, (1 << 7) | (NVIC_InitStruct->NVIC_IRQChannelSubPriority << 5)); + } + else if(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority == 0) + { + NVIC_SetPriority(NVIC_InitStruct->NVIC_IRQChannel, (0 << 7) | (NVIC_InitStruct->NVIC_IRQChannelSubPriority << 5)); + } + } +#endif + + if(NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) + { + NVIC_EnableIRQ(NVIC_InitStruct->NVIC_IRQChannel); + } + else + { + NVIC_DisableIRQ(NVIC_InitStruct->NVIC_IRQChannel); + } +} diff --git a/gat_stand_fw/periph/src/ch32v20x_opa.c b/gat_stand_fw/periph/src/ch32v20x_opa.c new file mode 100644 index 0000000..172f084 --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_opa.c @@ -0,0 +1,86 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_opa.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the OPA firmware functions. + ********************************************************************************* + * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. + * Attention: This software (modified or not) and binary are used for + * microcontroller manufactured by Nanjing Qinheng Microelectronics. + *******************************************************************************/ +#include "ch32v20x_opa.h" + +#define OPA_MASK ((uint32_t)0x000F) +#define OPA_Total_NUM 4 + +/********************************************************************* + * @fn OPA_DeInit + * + * @brief Deinitializes the OPA peripheral registers to their default + * reset values. + * + * @return none + */ +void OPA_DeInit(void) +{ + OPA->CR = 0; +} + +/********************************************************************* + * @fn OPA_Init + * + * @brief Initializes the OPA peripheral according to the specified + * parameters in the OPA_InitStruct. + * + * @param OPA_InitStruct - pointer to a OPA_InitTypeDef structure + * + * @return none + */ +void OPA_Init(OPA_InitTypeDef *OPA_InitStruct) +{ + uint32_t tmp = 0; + tmp = OPA->CR; + tmp &= ~(OPA_MASK << (OPA_InitStruct->OPA_NUM * OPA_Total_NUM)); + tmp |= (((OPA_InitStruct->PSEL << OPA_PSEL_OFFSET) | (OPA_InitStruct->NSEL << OPA_NSEL_OFFSET) | (OPA_InitStruct->Mode << OPA_MODE_OFFSET)) << (OPA_InitStruct->OPA_NUM * OPA_Total_NUM)); + OPA->CR = tmp; +} + +/********************************************************************* + * @fn OPA_StructInit + * + * @brief Fills each OPA_StructInit member with its reset value. + * + * @param OPA_StructInit - pointer to a OPA_InitTypeDef structure + * + * @return none + */ +void OPA_StructInit(OPA_InitTypeDef *OPA_InitStruct) +{ + OPA_InitStruct->Mode = OUT_IO_OUT1; + OPA_InitStruct->PSEL = CHP0; + OPA_InitStruct->NSEL = CHN0; + OPA_InitStruct->OPA_NUM = OPA1; +} + +/********************************************************************* + * @fn OPA_Cmd + * + * @brief Enables or disables the specified OPA peripheral. + * + * @param OPA_NUM - Select OPA + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void OPA_Cmd(OPA_Num_TypeDef OPA_NUM, FunctionalState NewState) +{ + if(NewState == ENABLE) + { + OPA->CR |= (1 << (OPA_NUM * OPA_Total_NUM)); + } + else + { + OPA->CR &= ~(1 << (OPA_NUM * OPA_Total_NUM)); + } +} diff --git a/gat_stand_fw/periph/src/ch32v20x_pwr.c b/gat_stand_fw/periph/src/ch32v20x_pwr.c new file mode 100644 index 0000000..e97c6ba --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_pwr.c @@ -0,0 +1,398 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_pwr.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the PWR firmware functions. + ********************************************************************************* + * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. + * Attention: This software (modified or not) and binary are used for + * microcontroller manufactured by Nanjing Qinheng Microelectronics. + *******************************************************************************/ +#include "ch32v20x_pwr.h" +#include "ch32v20x_rcc.h" + +/* PWR registers bit mask */ +/* CTLR register bit mask */ +#define CTLR_DS_MASK ((uint32_t)0xFFFFFFFC) +#define CTLR_PLS_MASK ((uint32_t)0xFFFFFF1F) + +/********************************************************************* + * @fn PWR_DeInit + * + * @brief Deinitializes the PWR peripheral registers to their default + * reset values. + * + * @return none + */ +void PWR_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE); +} + +/********************************************************************* + * @fn PWR_BackupAccessCmd + * + * @brief Enables or disables access to the RTC and backup registers. + * + * @param NewState - new state of the access to the RTC and backup registers, + * This parameter can be: ENABLE or DISABLE. + * + * @return none + */ +void PWR_BackupAccessCmd(FunctionalState NewState) +{ + if(NewState) + { + PWR->CTLR |= (1 << 8); + } + else + { + PWR->CTLR &= ~(1 << 8); + } +} + +/********************************************************************* + * @fn PWR_PVDCmd + * + * @brief Enables or disables the Power Voltage Detector(PVD). + * + * @param NewState - new state of the PVD(ENABLE or DISABLE). + * + * @return none + */ +void PWR_PVDCmd(FunctionalState NewState) +{ + if(NewState) + { + PWR->CTLR |= (1 << 4); + } + else + { + PWR->CTLR &= ~(1 << 4); + } +} + +/********************************************************************* + * @fn PWR_PVDLevelConfig + * + * @brief Configures the voltage threshold detected by the Power Voltage + * Detector(PVD). + * + * @param PWR_PVDLevel - specifies the PVD detection level + * PWR_PVDLevel_2V2 - PVD detection level set to 2.2V + * PWR_PVDLevel_2V3 - PVD detection level set to 2.3V + * PWR_PVDLevel_2V4 - PVD detection level set to 2.4V + * PWR_PVDLevel_2V5 - PVD detection level set to 2.5V + * PWR_PVDLevel_2V6 - PVD detection level set to 2.6V + * PWR_PVDLevel_2V7 - PVD detection level set to 2.7V + * PWR_PVDLevel_2V8 - PVD detection level set to 2.8V + * PWR_PVDLevel_2V9 - PVD detection level set to 2.9V + * + * @return none + */ +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel) +{ + uint32_t tmpreg = 0; + tmpreg = PWR->CTLR; + tmpreg &= CTLR_PLS_MASK; + tmpreg |= PWR_PVDLevel; + PWR->CTLR = tmpreg; +} + +/********************************************************************* + * @fn PWR_WakeUpPinCmd + * + * @brief Enables or disables the WakeUp Pin functionality. + * + * @param NewState - new state of the WakeUp Pin functionality + * (ENABLE or DISABLE). + * + * @return none + */ +void PWR_WakeUpPinCmd(FunctionalState NewState) +{ + if(NewState) + { + PWR->CSR |= (1 << 8); + } + else + { + PWR->CSR &= ~(1 << 8); + } +} + +/********************************************************************* + * @fn PWR_EnterSTOPMode + * + * @brief Enters STOP mode. + * + * @param PWR_Regulator - specifies the regulator state in STOP mode. + * PWR_Regulator_ON - STOP mode with regulator ON + * PWR_Regulator_LowPower - STOP mode with regulator in low power mode + * PWR_STOPEntry - specifies if STOP mode in entered with WFI or WFE instruction. + * PWR_STOPEntry_WFI - enter STOP mode with WFI instruction + * PWR_STOPEntry_WFE - enter STOP mode with WFE instruction + * + * @return none + */ +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry) +{ + uint32_t tmpreg = 0; + tmpreg = PWR->CTLR; + tmpreg &= CTLR_DS_MASK; + tmpreg |= PWR_Regulator; + PWR->CTLR = tmpreg; + + NVIC->SCTLR |= (1 << 2); + + if(PWR_STOPEntry == PWR_STOPEntry_WFI) + { + __WFI(); + } + else + { + __WFE(); + } + + NVIC->SCTLR &= ~(1 << 2); +} + +/********************************************************************* + * @fn PWR_EnterSTANDBYMode + * + * @brief Enters STANDBY mode. + * + * @return none + */ +void PWR_EnterSTANDBYMode(void) +{ + PWR->CTLR |= PWR_CTLR_CWUF; + PWR->CTLR |= PWR_CTLR_PDDS; + NVIC->SCTLR |= (1 << 2); + + __WFI(); +} + +/********************************************************************* + * @fn PWR_GetFlagStatus + * + * @brief Checks whether the specified PWR flag is set or not. + * + * @param PWR_FLAG - specifies the flag to check. + * PWR_FLAG_WU - Wake Up flag + * PWR_FLAG_SB - StandBy flag + * PWR_FLAG_PVDO - PVD Output + * + * @return The new state of PWR_FLAG (SET or RESET). + */ +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG) +{ + FlagStatus bitstatus = RESET; + + if((PWR->CSR & PWR_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/********************************************************************* + * @fn PWR_ClearFlag + * + * @brief Clears the PWR's pending flags. + * + * @param PWR_FLAG - specifies the flag to clear. + * PWR_FLAG_WU - Wake Up flag + * PWR_FLAG_SB - StandBy flag + * + * @return none + */ +void PWR_ClearFlag(uint32_t PWR_FLAG) +{ + PWR->CTLR |= PWR_FLAG << 2; +} + +/********************************************************************* + * @fn PWR_EnterSTANDBYMode_RAM + * + * @brief Enters STANDBY mode with RAM data retention function on. + * + * @return none + */ +void PWR_EnterSTANDBYMode_RAM(void) +{ + uint32_t tmpreg = 0; + tmpreg = PWR->CTLR; + + tmpreg |= PWR_CTLR_CWUF; + tmpreg |= PWR_CTLR_PDDS; + +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + //2K+30K in standby w power. + tmpreg |= (0x1 << 16) | (0x1 << 17); +#else + //RAM in standby power. + tmpreg |= ( ( uint32_t )1 << 16 ); + +#endif + + PWR->CTLR = tmpreg; + + NVIC->SCTLR |= (1 << 2); + + __WFI(); +} + +/********************************************************************* + * @fn PWR_EnterSTANDBYMode_RAM_LV + * + * @brief Enters STANDBY mode with RAM data retention function and LV mode on. + * + * @return none + */ +void PWR_EnterSTANDBYMode_RAM_LV(void) +{ + uint32_t tmpreg = 0; + tmpreg = PWR->CTLR; + + tmpreg |= PWR_CTLR_CWUF; + tmpreg |= PWR_CTLR_PDDS; + +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + //2K+30K in standby power. + tmpreg |= (0x1 << 16) | (0x1 << 17); + //2K+30K in standby LV . + tmpreg |= (0x1 << 20); +#else + //RAM in standby power. + tmpreg |= ( ( uint32_t )1 << 16 ); + //RAM in standby LV . + tmpreg |= ( ( uint32_t )1 << 20 ); + +#endif + + PWR->CTLR = tmpreg; + + NVIC->SCTLR |= (1 << 2); + + __WFI(); +} + +/********************************************************************* + * @fn PWR_EnterSTANDBYMode_RAM_VBAT_EN + * + * @brief Enters STANDBY mode with RAM data retention function on (VBAT Enable). + * + * @return none + */ +void PWR_EnterSTANDBYMode_RAM_VBAT_EN(void) +{ + uint32_t tmpreg = 0; + tmpreg = PWR->CTLR; + + tmpreg |= PWR_CTLR_CWUF; + tmpreg |= PWR_CTLR_PDDS; + +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + //2K+30K in standby power (VBAT Enable). + tmpreg |= (0x1 << 18) | (0x1 << 19); +#else + //RAM in standby w power. + tmpreg |= ( ( uint32_t )1 << 18 ); + +#endif + + PWR->CTLR = tmpreg; + + NVIC->SCTLR |= (1 << 2); + + __WFI(); +} + +/********************************************************************* + * @fn PWR_EnterSTANDBYMode_RAM_LV_VBAT_EN + * + * @brief Enters STANDBY mode with RAM data retention function and LV mode on(VBAT Enable). + * + * @return none + */ +void PWR_EnterSTANDBYMode_RAM_LV_VBAT_EN(void) +{ + uint32_t tmpreg = 0; + tmpreg = PWR->CTLR; + + tmpreg |= PWR_CTLR_CWUF; + tmpreg |= PWR_CTLR_PDDS; + +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + //2K+30K in standby power (VBAT Enable). + tmpreg |= (0x1 << 18) | (0x1 << 19); + //2K+30K in standby LV . + tmpreg |= (0x1 << 20); +#else + //RAM in standby w power. + tmpreg |= ( ( uint32_t )1 << 18 ); + //RAM in standby LV . + tmpreg |= ( ( uint32_t )1 << 20 ); + +#endif + + PWR->CTLR = tmpreg; + + NVIC->SCTLR |= (1 << 2); + + __WFI(); +} + + +/********************************************************************* + * @fn PWR_EnterSTOPMode_RAM_LV + * + * @brief Enters STOP mode with RAM data retention function and LV mode on. + * + * @param PWR_Regulator - specifies the regulator state in STOP mode. + * PWR_Regulator_ON - STOP mode with regulator ON + * PWR_Regulator_LowPower - STOP mode with regulator in low power mode + * PWR_STOPEntry - specifies if STOP mode in entered with WFI or WFE instruction. + * PWR_STOPEntry_WFI - enter STOP mode with WFI instruction + * PWR_STOPEntry_WFE - enter STOP mode with WFE instruction + * + * @return none + */ +void PWR_EnterSTOPMode_RAM_LV(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry) +{ + uint32_t tmpreg = 0; + tmpreg = PWR->CTLR; + tmpreg &= CTLR_DS_MASK; + tmpreg |= PWR_Regulator; + +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + + tmpreg |= (0x1 << 20); +#else + + tmpreg |= ( ( uint32_t )1 << 20 ); + +#endif + + PWR->CTLR = tmpreg; + + NVIC->SCTLR |= (1 << 2); + + if(PWR_STOPEntry == PWR_STOPEntry_WFI) + { + __WFI(); + } + else + { + __WFE(); + } + + NVIC->SCTLR &= ~(1 << 2); +} diff --git a/gat_stand_fw/periph/src/ch32v20x_rcc.c b/gat_stand_fw/periph/src/ch32v20x_rcc.c new file mode 100644 index 0000000..12bb140 --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_rcc.c @@ -0,0 +1,1032 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_rcc.c + * Author : WCH + * Version : V1.0.0 + * Date : 2024/01/30 + * Description : This file provides all the RCC firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_rcc.h" + +/* RCC registers bit address in the alias region */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) + +/* BDCTLR Register */ +#define BDCTLR_OFFSET (RCC_OFFSET + 0x20) + +/* RCC registers bit mask */ + +/* CTLR register bit mask */ +#define CTLR_HSEBYP_Reset ((uint32_t)0xFFFBFFFF) +#define CTLR_HSEBYP_Set ((uint32_t)0x00040000) +#define CTLR_HSEON_Reset ((uint32_t)0xFFFEFFFF) +#define CTLR_HSEON_Set ((uint32_t)0x00010000) +#define CTLR_HSITRIM_Mask ((uint32_t)0xFFFFFF07) + +#define CFGR0_PLL_Mask ((uint32_t)0xFFC0FFFF) + +#define CFGR0_PLLMull_Mask ((uint32_t)0x003C0000) +#define CFGR0_PLLSRC_Mask ((uint32_t)0x00010000) +#define CFGR0_PLLXTPRE_Mask ((uint32_t)0x00020000) +#define CFGR0_SWS_Mask ((uint32_t)0x0000000C) +#define CFGR0_SW_Mask ((uint32_t)0xFFFFFFFC) +#define CFGR0_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F) +#define CFGR0_HPRE_Set_Mask ((uint32_t)0x000000F0) +#define CFGR0_PPRE1_Reset_Mask ((uint32_t)0xFFFFF8FF) +#define CFGR0_PPRE1_Set_Mask ((uint32_t)0x00000700) +#define CFGR0_PPRE2_Reset_Mask ((uint32_t)0xFFFFC7FF) +#define CFGR0_PPRE2_Set_Mask ((uint32_t)0x00003800) +#define CFGR0_ADCPRE_Reset_Mask ((uint32_t)0xFFFF3FFF) +#define CFGR0_ADCPRE_Set_Mask ((uint32_t)0x0000C000) + +/* RSTSCKR register bit mask */ +#define RSTSCKR_RMVF_Set ((uint32_t)0x01000000) + +/* CFGR2 register bit mask */ +#define CFGR2_PREDIV1SRC ((uint32_t)0x00010000) +#define CFGR2_PREDIV1 ((uint32_t)0x0000000F) +#define CFGR2_PREDIV2 ((uint32_t)0x000000F0) +#define CFGR2_PLL2MUL ((uint32_t)0x00000F00) +#define CFGR2_PLL3MUL ((uint32_t)0x0000F000) + +/* RCC Flag Mask */ +#define FLAG_Mask ((uint8_t)0x1F) + +/* INTR register byte 2 (Bits[15:8]) base address */ +#define INTR_BYTE2_ADDRESS ((uint32_t)0x40021009) + +/* INTR register byte 3 (Bits[23:16]) base address */ +#define INTR_BYTE3_ADDRESS ((uint32_t)0x4002100A) + +/* CFGR0 register byte 4 (Bits[31:24]) base address */ +#define CFGR0_BYTE4_ADDRESS ((uint32_t)0x40021007) + +/* BDCTLR register base address */ +#define BDCTLR_ADDRESS (PERIPH_BASE + BDCTLR_OFFSET) + + +static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; +static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8}; + +/********************************************************************* + * @fn RCC_DeInit + * + * @brief Resets the RCC clock configuration to the default reset state. + * Note- + * HSE can not be stopped if it is used directly or through the PLL as system clock. + * @return none + */ +void RCC_DeInit(void) +{ + RCC->CTLR |= (uint32_t)0x00000001; + RCC->CFGR0 &= (uint32_t)0xF0FF0000; + RCC->CTLR &= (uint32_t)0xFEF6FFFF; + RCC->CTLR &= (uint32_t)0xFFFBFFFF; + RCC->CFGR0 &= (uint32_t)0xFF00FFFF; + RCC->INTR = 0x009F0000; +} + +/********************************************************************* + * @fn RCC_HSEConfig + * + * @brief Configures the External High Speed oscillator (HSE). + * + * @param RCC_HSE - + * RCC_HSE_OFF - HSE oscillator OFF. + * RCC_HSE_ON - HSE oscillator ON. + * RCC_HSE_Bypass - HSE oscillator bypassed with external clock. + * Note- + * HSE can not be stopped if it is used directly or through the PLL as system clock. + * @return none + */ +void RCC_HSEConfig(uint32_t RCC_HSE) +{ + RCC->CTLR &= CTLR_HSEON_Reset; + RCC->CTLR &= CTLR_HSEBYP_Reset; + + switch(RCC_HSE) + { + case RCC_HSE_ON: + RCC->CTLR |= CTLR_HSEON_Set; + break; + + case RCC_HSE_Bypass: + RCC->CTLR |= CTLR_HSEBYP_Set | CTLR_HSEON_Set; + break; + + default: + break; + } +} + +/********************************************************************* + * @fn RCC_WaitForHSEStartUp + * + * @brief Waits for HSE start-up. + * + * @return READY - HSE oscillator is stable and ready to use. + * NoREADY - HSE oscillator not yet ready. + */ +ErrorStatus RCC_WaitForHSEStartUp(void) +{ + __IO uint32_t StartUpCounter = 0; + + ErrorStatus status = NoREADY; + FlagStatus HSEStatus = RESET; + + do + { + HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); + StartUpCounter++; + } while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET)); + + if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) + { + status = READY; + } + else + { + status = NoREADY; + } + + return (status); +} + +/********************************************************************* + * @fn RCC_AdjustHSICalibrationValue + * + * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value. + * + * @param HSICalibrationValue - specifies the calibration trimming value. + * This parameter must be a number between 0 and 0x1F. + * + * @return none + */ +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue) +{ + uint32_t tmpreg = 0; + + tmpreg = RCC->CTLR; + tmpreg &= CTLR_HSITRIM_Mask; + tmpreg |= (uint32_t)HSICalibrationValue << 3; + RCC->CTLR = tmpreg; +} + +/********************************************************************* + * @fn RCC_HSICmd + * + * @brief Enables or disables the Internal High Speed oscillator (HSI). + * + * @param NewState - ENABLE or DISABLE. + * + * @return none + */ +void RCC_HSICmd(FunctionalState NewState) +{ + if(NewState) + { + RCC->CTLR |= (1<<0); + } + else{ + RCC->CTLR &= ~(1<<0); + } +} + +/********************************************************************* + * @fn RCC_PLLConfig + * + * @brief Configures the PLL clock source and multiplication factor. + * + * @param RCC_PLLSource - specifies the PLL entry clock source. + * RCC_PLLSource_HSI_Div2 - HSI oscillator clock divided by 2 + * selected as PLL clock entry. + * RCC_PLLSource_PREDIV1 - PREDIV1 clock selected as PLL clock + * entry. + * RCC_PLLMul - specifies the PLL multiplication factor. + * This parameter can be RCC_PLLMul_x where x:[2,16]. + * RCC_PLLMul_2 + * RCC_PLLMul_3 + * RCC_PLLMul_4 + * RCC_PLLMul_5 + * RCC_PLLMul_6 + * RCC_PLLMul_7 + * RCC_PLLMul_8 + * RCC_PLLMul_9 + * RCC_PLLMul_10 + * RCC_PLLMul_11 + * RCC_PLLMul_12 + * RCC_PLLMul_13 + * RCC_PLLMul_14 + * RCC_PLLMul_15 + * RCC_PLLMul_16 + * RCC_PLLMul_18 + * + * @return none + */ +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul) +{ + uint32_t tmpreg = 0; + + tmpreg = RCC->CFGR0; + + tmpreg &= CFGR0_PLL_Mask; + tmpreg |= RCC_PLLSource | RCC_PLLMul; + RCC->CFGR0 = tmpreg; +} + +/********************************************************************* + * @fn RCC_PLLCmd + * + * @brief Enables or disables the PLL. + * Note-The PLL can not be disabled if it is used as system clock. + * + * + * @param NewState - ENABLE or DISABLE. + * + * @return none + */ +void RCC_PLLCmd(FunctionalState NewState) +{ + if(NewState) + { + RCC->CTLR |= (1<<24); + } + else{ + RCC->CTLR &= ~(1<<24); + } +} + +/********************************************************************* + * @fn RCC_SYSCLKConfig + * + * @brief Configures the system clock (SYSCLK). + * + * @param RCC_SYSCLKSource - specifies the clock source used as system clock. + * RCC_SYSCLKSource_HSI - HSI selected as system clock. + * RCC_SYSCLKSource_HSE - HSE selected as system clock. + * RCC_SYSCLKSource_PLLCLK - PLL selected as system clock. + * + * @return none + */ +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource) +{ + uint32_t tmpreg = 0; + + tmpreg = RCC->CFGR0; + tmpreg &= CFGR0_SW_Mask; + tmpreg |= RCC_SYSCLKSource; + RCC->CFGR0 = tmpreg; +} + +/********************************************************************* + * @fn RCC_GetSYSCLKSource + * + * @brief Returns the clock source used as system clock. + * + * @return 0x00 - HSI used as system clock. + * 0x04 - HSE used as system clock. + * 0x08 - PLL used as system clock. + */ +uint8_t RCC_GetSYSCLKSource(void) +{ + return ((uint8_t)(RCC->CFGR0 & CFGR0_SWS_Mask)); +} + +/********************************************************************* + * @fn RCC_HCLKConfig + * + * @brief Configures the AHB clock (HCLK). + * + * @param RCC_SYSCLK - defines the AHB clock divider. This clock is derived from + * the system clock (SYSCLK). + * RCC_SYSCLK_Div1 - AHB clock = SYSCLK. + * RCC_SYSCLK_Div2 - AHB clock = SYSCLK/2. + * RCC_SYSCLK_Div4 - AHB clock = SYSCLK/4. + * RCC_SYSCLK_Div8 - AHB clock = SYSCLK/8. + * RCC_SYSCLK_Div16 - AHB clock = SYSCLK/16. + * RCC_SYSCLK_Div64 - AHB clock = SYSCLK/64. + * RCC_SYSCLK_Div128 - AHB clock = SYSCLK/128. + * RCC_SYSCLK_Div256 - AHB clock = SYSCLK/256. + * RCC_SYSCLK_Div512 - AHB clock = SYSCLK/512. + * + * @return none + */ +void RCC_HCLKConfig(uint32_t RCC_SYSCLK) +{ + uint32_t tmpreg = 0; + + tmpreg = RCC->CFGR0; + tmpreg &= CFGR0_HPRE_Reset_Mask; + tmpreg |= RCC_SYSCLK; + RCC->CFGR0 = tmpreg; +} + +/********************************************************************* + * @fn RCC_PCLK1Config + * + * @brief Configures the Low Speed APB clock (PCLK1). + * + * @param RCC_HCLK - defines the APB1 clock divider. This clock is derived from + * the AHB clock (HCLK). + * RCC_HCLK_Div1 - APB1 clock = HCLK. + * RCC_HCLK_Div2 - APB1 clock = HCLK/2. + * RCC_HCLK_Div4 - APB1 clock = HCLK/4. + * RCC_HCLK_Div8 - APB1 clock = HCLK/8. + * RCC_HCLK_Div16 - APB1 clock = HCLK/16. + * + * @return none + */ +void RCC_PCLK1Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + + tmpreg = RCC->CFGR0; + tmpreg &= CFGR0_PPRE1_Reset_Mask; + tmpreg |= RCC_HCLK; + RCC->CFGR0 = tmpreg; +} + +/********************************************************************* + * @fn RCC_PCLK2Config + * + * @brief Configures the High Speed APB clock (PCLK2). + * + * @param RCC_HCLK - defines the APB2 clock divider. This clock is derived from + * the AHB clock (HCLK). + * RCC_HCLK_Div1 - APB2 clock = HCLK. + * RCC_HCLK_Div2 - APB2 clock = HCLK/2. + * RCC_HCLK_Div4 - APB2 clock = HCLK/4. + * RCC_HCLK_Div8 - APB2 clock = HCLK/8. + * RCC_HCLK_Div16 - APB2 clock = HCLK/16. + * @return none + */ +void RCC_PCLK2Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + + tmpreg = RCC->CFGR0; + tmpreg &= CFGR0_PPRE2_Reset_Mask; + tmpreg |= RCC_HCLK << 3; + RCC->CFGR0 = tmpreg; +} + +/********************************************************************* + * @fn RCC_ITConfig + * + * @brief Enables or disables the specified RCC interrupts. + * + * @param RCC_IT - specifies the RCC interrupt sources to be enabled or disabled. + * RCC_IT_LSIRDY - LSI ready interrupt. + * RCC_IT_LSERDY - LSE ready interrupt. + * RCC_IT_HSIRDY - HSI ready interrupt. + * RCC_IT_HSERDY - HSE ready interrupt. + * RCC_IT_PLLRDY - PLL ready interrupt. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState) +{ + if (NewState != DISABLE) + { + *(__IO uint8_t *) INTR_BYTE2_ADDRESS |= RCC_IT; + } + else + { + *(__IO uint8_t *) INTR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT; + } +} + +/********************************************************************* + * @fn RCC_USBCLKConfig + * + * @brief Configures the USB clock (USBCLK). + * + * @param RCC_USBCLKSource: specifies the USB clock source. This clock is + * derived from the PLL output. + * RCC_USBCLKSource_PLLCLK_Div1 - PLL clock selected as USB clock source(48Mhz). + * RCC_USBCLKSource_PLLCLK_Div2 - PLL clock selected as USB clock source(96MHz). + * RCC_USBCLKSource_PLLCLK_Div3 - PLL clock selected as USB clock source(144MHz). + * RCC_USBCLKSource_PLLCLK_Div5 - PLL clock selected as USB clock source(240MHz). + * + * @return none + */ +void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource) +{ + RCC->CFGR0 &= ~((uint32_t)3<<22); + RCC->CFGR0 |= RCC_USBCLKSource<<22; +} + +/********************************************************************* + * @fn RCC_ADCCLKConfig + * + * @brief Configures the ADC clock (ADCCLK). + * + * @param RCC_PCLK2 - defines the ADC clock divider. This clock is derived from + * the APB2 clock (PCLK2). + * RCC_PCLK2_Div2 - ADC clock = PCLK2/2. + * RCC_PCLK2_Div4 - ADC clock = PCLK2/4. + * RCC_PCLK2_Div6 - ADC clock = PCLK2/6. + * RCC_PCLK2_Div8 - ADC clock = PCLK2/8. + * + * @return none + */ +void RCC_ADCCLKConfig(uint32_t RCC_PCLK2) +{ + uint32_t tmpreg = 0; + + tmpreg = RCC->CFGR0; + tmpreg &= CFGR0_ADCPRE_Reset_Mask; + tmpreg |= RCC_PCLK2; + RCC->CFGR0 = tmpreg; +} + +/********************************************************************* + * @fn RCC_LSEConfig + * + * @brief Configures the External Low Speed oscillator (LSE). + * + * @param RCC_LSE - specifies the new state of the LSE. + * RCC_LSE_OFF - LSE oscillator OFF. + * RCC_LSE_ON - LSE oscillator ON. + * RCC_LSE_Bypass - LSE oscillator bypassed with external clock. + * + * @return none + */ +void RCC_LSEConfig(uint8_t RCC_LSE) +{ + *(__IO uint8_t *) BDCTLR_ADDRESS = RCC_LSE_OFF; + *(__IO uint8_t *) BDCTLR_ADDRESS = RCC_LSE_OFF; + + switch(RCC_LSE) + { + case RCC_LSE_ON: + *(__IO uint8_t *) BDCTLR_ADDRESS = RCC_LSE_ON; + break; + + case RCC_LSE_Bypass: + *(__IO uint8_t *) BDCTLR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON; + break; + + default: + break; + } +} + +/********************************************************************* + * @fn RCC_LSICmd + * + * @brief Enables or disables the Internal Low Speed oscillator (LSI). + * Note- + * LSI can not be disabled if the IWDG is running. + * + * @param NewState - ENABLE or DISABLE. + * + * @return none + */ +void RCC_LSICmd(FunctionalState NewState) +{ + if(NewState) + { + RCC->RSTSCKR |= (1<<0); + } + else{ + RCC->RSTSCKR &= ~(1<<0); + } +} + +/********************************************************************* + * @fn RCC_RTCCLKConfig + * + * @brief Once the RTC clock is selected it can't be changed unless the Backup domain is reset. + * + * @param RCC_RTCCLKSource - specifies the RTC clock source. + * RCC_RTCCLKSource_LSE - LSE selected as RTC clock. + * RCC_RTCCLKSource_LSI - LSI selected as RTC clock. + * RCC_RTCCLKSource_HSE_Div128 - HSE clock divided by 128 selected as RTC clock(CH32V20x_D6) + * RCC_RTCCLKSource_HSE_Div512 - HSE clock divided by 512 selected as RTC clock(CH32V20x_D8,CH32V20x_D8W) + * Note- + * Once the RTC clock is selected it can't be changed unless the Backup domain is reset. + * @return none + */ +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource) +{ + RCC->BDCTLR |= RCC_RTCCLKSource; +} + +/********************************************************************* + * @fn RCC_RTCCLKCmd + * + * @brief This function must be used only after the RTC clock was selected + * using the RCC_RTCCLKConfig function. + * + * @param NewState - ENABLE or DISABLE. + * + * @return none + */ +void RCC_RTCCLKCmd(FunctionalState NewState) +{ + if(NewState) + { + RCC->BDCTLR |= (1<<15); + } + else{ + RCC->BDCTLR &= ~(1<<15); + } +} + +/********************************************************************* + * @fn RCC_GetClocksFreq + * + * @brief The result of this function could be not correct when using + * fractional value for HSE crystal. + * + * @param RCC_Clocks - pointer to a RCC_ClocksTypeDef structure which will hold + * the clocks frequencies. + * + * @return none + */ +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0; + + tmp = RCC->CFGR0 & CFGR0_SWS_Mask; + + switch (tmp) + { + case 0x00: + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + + case 0x04: + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE; + break; + + case 0x08: + pllmull = RCC->CFGR0 & CFGR0_PLLMull_Mask; + pllsource = RCC->CFGR0 & CFGR0_PLLSRC_Mask; + + pllmull = ( pllmull >> 18) + 2; + + if(pllmull == 17) pllmull = 18; + + + if (pllsource == 0x00) + { + if(EXTEN->EXTEN_CTR & EXTEN_PLL_HSI_PRE){ + RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE) * pllmull; + } + else{ + RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >>1) * pllmull; + } + } + else + { +#if defined (CH32V20x_D8W) + if((RCC->CFGR0 & (3<<22)) == (3<<22)) + { + RCC_Clocks->SYSCLK_Frequency = ((HSE_VALUE>>1)) * pllmull; + } + else +#endif + if ((RCC->CFGR0 & CFGR0_PLLXTPRE_Mask) != (uint32_t)RESET) + { +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + RCC_Clocks->SYSCLK_Frequency = ((HSE_VALUE>>2) >> 1) * pllmull; +#else + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE >> 1) * pllmull; +#endif + } + else + { +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE>>2) * pllmull; +#else + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE * pllmull; +#endif + + } + } + + break; + + default: + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + } + + tmp = RCC->CFGR0 & CFGR0_HPRE_Set_Mask; + tmp = tmp >> 4; + presc = APBAHBPrescTable[tmp]; + RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; + tmp = RCC->CFGR0 & CFGR0_PPRE1_Set_Mask; + tmp = tmp >> 8; + presc = APBAHBPrescTable[tmp]; + RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + tmp = RCC->CFGR0 & CFGR0_PPRE2_Set_Mask; + tmp = tmp >> 11; + presc = APBAHBPrescTable[tmp]; + RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + tmp = RCC->CFGR0 & CFGR0_ADCPRE_Set_Mask; + tmp = tmp >> 14; + presc = ADCPrescTable[tmp]; + RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc; +} + +/********************************************************************* + * @fn RCC_AHBPeriphClockCmd + * + * @brief Enables or disables the AHB peripheral clock. + * + * @param RCC_AHBPeriph - specifies the AHB peripheral to gates its clock. + * RCC_AHBPeriph_DMA1. + * RCC_AHBPeriph_DMA2. + * RCC_AHBPeriph_SRAM. + * RCC_AHBPeriph_CRC. + * RCC_AHBPeriph_USBFS + * Note- + * SRAM clock can be disabled only during sleep mode. + * NewState: ENABLE or DISABLE. + * + * @return none + */ +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + if (NewState != DISABLE) + { + RCC->AHBPCENR |= RCC_AHBPeriph; + } + else + { + RCC->AHBPCENR &= ~RCC_AHBPeriph; + } +} + +/********************************************************************* + * @fn RCC_APB2PeriphClockCmd + * + * @brief Enables or disables the High Speed APB (APB2) peripheral clock. + * + * @param RCC_APB2Periph - specifies the APB2 peripheral to gates its clock. + * RCC_APB2Periph_AFIO. + * RCC_APB2Periph_GPIOA. + * RCC_APB2Periph_GPIOB. + * RCC_APB2Periph_GPIOC. + * RCC_APB2Periph_GPIOD. + * RCC_APB2Periph_GPIOE + * RCC_APB2Periph_ADC1. + * RCC_APB2Periph_ADC2 + * RCC_APB2Periph_TIM1. + * RCC_APB2Periph_SPI1. + * RCC_APB2Periph_TIM8 + * RCC_APB2Periph_USART1. + * NewState - ENABLE or DISABLE + * + * @return none + */ +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + if (NewState != DISABLE) + { + RCC->APB2PCENR |= RCC_APB2Periph; + } + else + { + RCC->APB2PCENR &= ~RCC_APB2Periph; + } +} + +/********************************************************************* + * @fn RCC_APB1PeriphClockCmd + * + * @brief Enables or disables the Low Speed APB (APB1) peripheral clock. + * + * @param RCC_APB1Periph - specifies the APB1 peripheral to gates its clock. + * RCC_APB1Periph_TIM2. + * RCC_APB1Periph_TIM3. + * RCC_APB1Periph_TIM4. + * RCC_APB1Periph_TIM5 + * RCC_APB1Periph_WWDG. + * RCC_APB1Periph_SPI2. + * RCC_APB1Periph_USART2. + * RCC_APB1Periph_USART3. + * RCC_APB1Periph_UART4 + * RCC_APB1Periph_I2C1. + * RCC_APB1Periph_I2C2. + * RCC_APB1Periph_USB. + * RCC_APB1Periph_CAN1. + * RCC_APB1Periph_BKP. + * RCC_APB1Periph_PWR. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + if (NewState != DISABLE) + { + RCC->APB1PCENR |= RCC_APB1Periph; + } + else + { + RCC->APB1PCENR &= ~RCC_APB1Periph; + } +} + +/********************************************************************* + * @fn RCC_APB2PeriphResetCmd + * + * @brief Forces or releases High Speed APB (APB2) peripheral reset. + * + * @param RCC_APB2Periph - specifies the APB2 peripheral to reset. + * RCC_APB2Periph_AFIO. + * RCC_APB2Periph_GPIOA. + * RCC_APB2Periph_GPIOB. + * RCC_APB2Periph_GPIOC. + * RCC_APB2Periph_GPIOD. + * RCC_APB2Periph_GPIOE + * RCC_APB2Periph_ADC1. + * RCC_APB2Periph_ADC2 + * RCC_APB2Periph_TIM1. + * RCC_APB2Periph_SPI1. + * RCC_APB2Periph_TIM8 + * RCC_APB2Periph_USART1. + * NewState - ENABLE or DISABLE + * + * @return none + */ +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + if (NewState != DISABLE) + { + RCC->APB2PRSTR |= RCC_APB2Periph; + } + else + { + RCC->APB2PRSTR &= ~RCC_APB2Periph; + } +} + +/********************************************************************* + * @fn RCC_APB1PeriphResetCmd + * + * @brief Forces or releases Low Speed APB (APB1) peripheral reset. + * + * @param RCC_APB1Periph - specifies the APB1 peripheral to reset. + * RCC_APB1Periph_TIM2. + * RCC_APB1Periph_TIM3. + * RCC_APB1Periph_TIM4. + * RCC_APB1Periph_TIM5 + * RCC_APB1Periph_WWDG. + * RCC_APB1Periph_SPI2. + * RCC_APB1Periph_USART2. + * RCC_APB1Periph_USART3. + * RCC_APB1Periph_UART4 + * RCC_APB1Periph_I2C1. + * RCC_APB1Periph_I2C2. + * RCC_APB1Periph_USB. + * RCC_APB1Periph_CAN1. + * RCC_APB1Periph_BKP. + * RCC_APB1Periph_PWR. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + if (NewState != DISABLE) + { + RCC->APB1PRSTR |= RCC_APB1Periph; + } + else + { + RCC->APB1PRSTR &= ~RCC_APB1Periph; + } +} + +/********************************************************************* + * @fn RCC_BackupResetCmd + * + * @brief Forces or releases the Backup domain reset. + * + * @param NewState - ENABLE or DISABLE. + * + * @return none + */ +void RCC_BackupResetCmd(FunctionalState NewState) +{ + if(NewState) + { + RCC->BDCTLR |= (1<<16); + } + else{ + RCC->BDCTLR &= ~(1<<16); + } +} + +/******************************************************************************* +* Function Name : RCC_ClockSecuritySystemCmd +* Description : Enables or disables the Clock Security System. +* Input : NewState: ENABLE or DISABLE. +* Return : None +*******************************************************************************/ +void RCC_ClockSecuritySystemCmd(FunctionalState NewState) +{ + if(NewState) + { + RCC->CTLR |= (1<<19); + } + else{ + RCC->CTLR &= ~(1<<19); + } +} + +/********************************************************************* + * @fn RCC_MCOConfig + * + * @brief Selects the clock source to output on MCO pin. + * + * @param RCC_MCO - specifies the clock source to output. + * RCC_MCO_NoClock - No clock selected. + * RCC_MCO_SYSCLK - System clock selected. + * RCC_MCO_HSI - HSI oscillator clock selected. + * RCC_MCO_HSE - HSE oscillator clock selected. + * RCC_MCO_PLLCLK_Div2 - PLL clock divided by 2 selected. + * + * @return none + */ +void RCC_MCOConfig(uint8_t RCC_MCO) +{ + *(__IO uint8_t *) CFGR0_BYTE4_ADDRESS = RCC_MCO; +} + +/********************************************************************* + * @fn RCC_GetFlagStatus + * + * @brief Checks whether the specified RCC flag is set or not. + * + * @param RCC_FLAG - specifies the flag to check. + * RCC_FLAG_HSIRDY - HSI oscillator clock ready. + * RCC_FLAG_HSERDY - HSE oscillator clock ready. + * RCC_FLAG_PLLRDY - PLL clock ready. + * RCC_FLAG_PLL2RDY - PLL2 clock ready. + * RCC_FLAG_PLL3RDY - PLL3 clock ready. + * RCC_FLAG_LSERDY - LSE oscillator clock ready. + * RCC_FLAG_LSIRDY - LSI oscillator clock ready. + * RCC_FLAG_PINRST - Pin reset. + * RCC_FLAG_PORRST - POR/PDR reset. + * RCC_FLAG_SFTRST - Software reset. + * RCC_FLAG_IWDGRST - Independent Watchdog reset. + * RCC_FLAG_WWDGRST - Window Watchdog reset. + * RCC_FLAG_LPWRRST - Low Power reset. + * + * @return FlagStatus - SET or RESET. + */ +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG) +{ + uint32_t tmp = 0; + uint32_t statusreg = 0; + + FlagStatus bitstatus = RESET; + tmp = RCC_FLAG >> 5; + + if (tmp == 1) + { + statusreg = RCC->CTLR; + } + else if (tmp == 2) + { + statusreg = RCC->BDCTLR; + } + else + { + statusreg = RCC->RSTSCKR; + } + + tmp = RCC_FLAG & FLAG_Mask; + + if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn RCC_ClearFlag + * + * @brief Clears the RCC reset flags. + * Note- + * The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + * @return none + */ +void RCC_ClearFlag(void) +{ + RCC->RSTSCKR |= RSTSCKR_RMVF_Set; +} + +/********************************************************************* + * @fn RCC_GetITStatus + * + * @brief Checks whether the specified RCC interrupt has occurred or not. + * + * @param RCC_IT - specifies the RCC interrupt source to check. + * RCC_IT_LSIRDY - LSI ready interrupt. + * RCC_IT_LSERDY - LSE ready interrupt. + * RCC_IT_HSIRDY - HSI ready interrupt. + * RCC_IT_HSERDY - HSE ready interrupt. + * RCC_IT_PLLRDY - PLL ready interrupt. + * RCC_IT_PLL2RDY - PLL2 ready interrupt. + * RCC_IT_PLL3RDY - PLL3 ready interrupt. + * RCC_IT_CSS - Clock Security System interrupt. + * + * @return ITStatus - SET or RESET. + */ + +ITStatus RCC_GetITStatus(uint8_t RCC_IT) +{ + ITStatus bitstatus = RESET; + + if ((RCC->INTR & RCC_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn RCC_ClearITPendingBit + * + * @brief Clears the RCC's interrupt pending bits. + * + * @param RCC_IT - specifies the interrupt pending bit to clear. + * RCC_IT_LSIRDY - LSI ready interrupt. + * RCC_IT_LSERDY - LSE ready interrupt. + * RCC_IT_HSIRDY - HSI ready interrupt. + * RCC_IT_HSERDY - HSE ready interrupt. + * RCC_IT_PLLRDY - PLL ready interrupt. + * RCC_IT_PLL2RDY - PLL2 ready interrupt. + * RCC_IT_PLL3RDY - PLL3 ready interrupt. + * RCC_IT_CSS - Clock Security System interrupt. + * + * @return none + */ +void RCC_ClearITPendingBit(uint8_t RCC_IT) +{ + *(__IO uint8_t *) INTR_BYTE3_ADDRESS = RCC_IT; +} + +/********************************************************************* + * @fn RCC_ADCCLKADJcmd + * + * @brief Enable ADC clock duty cycle adjustment. + * + * @param NewState - ENABLE or DISABLE. + * + * @return none + */ +void RCC_ADCCLKADJcmd(FunctionalState NewState) +{ + if (NewState != DISABLE) + { + RCC->CFGR0 |= (1<<31); + } + else + { + RCC->CFGR0 &= ~(1<<31); + } +} + +/********************************************************************* + * @fn RCC_ETHDIVConfig + * + * @brief Configures the ETH clock. + * + * @param RCC_ETHPRE_Div - defines the USBHS clock divider. + * RCC_ETHCLK_Div1 - ETH clock = AHB/1. + * RCC_ETHCLK_Div2 - ETH clock = AHB/2. + * + * @return none + */ +void RCC_ETHDIVConfig(uint32_t RCC_ETHPRE_Div) +{ + RCC->CFGR0 &= ~((uint32_t)1<<28); + RCC->CFGR0 |= RCC_ETHPRE_Div<<28; +} + + + diff --git a/gat_stand_fw/periph/src/ch32v20x_rtc.c b/gat_stand_fw/periph/src/ch32v20x_rtc.c new file mode 100644 index 0000000..bc3d899 --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_rtc.c @@ -0,0 +1,478 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_rtc.c + * Author : WCH + * Version : V1.0.0 + * Date : 2024/01/06 + * Description : This file provides all the RTC firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_rtc.h" + +/* RTC_Private_Defines */ +#define RTC_LSB_MASK ((uint32_t)0x0000FFFF) /* RTC LSB Mask */ +#define PRLH_MSB_MASK ((uint32_t)0x000F0000) /* RTC Prescaler MSB Mask */ + +/********************************************************************* + * @fn RTC_ITConfig + * + * @brief Enables or disables the specified RTC interrupts. + * + * @param RTC_IT - specifies the RTC interrupts sources to be enabled or disabled. + * RTC_IT_OW - Overflow interrupt + * RTC_IT_ALR - Alarm interrupt + * RTC_IT_SEC - Second interrupt + * + * @return NewState - new state of the specified RTC interrupts(ENABLE or DISABLE). + */ +void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + RTC->CTLRH |= RTC_IT; + } + else + { + RTC->CTLRH &= (uint16_t)~RTC_IT; + } +} + +/********************************************************************* + * @fn RTC_EnterConfigMode + * + * @brief Enters the RTC configuration mode. + * + * @return none + */ +void RTC_EnterConfigMode(void) +{ + RTC->CTLRL |= RTC_CTLRL_CNF; +} + +/********************************************************************* + * @fn RTC_ExitConfigMode + * + * @brief Exits from the RTC configuration mode. + * + * @return none + */ +void RTC_ExitConfigMode(void) +{ + RTC->CTLRL &= (uint16_t) ~((uint16_t)RTC_CTLRL_CNF); +} + +/********************************************************************* + * @fn RTC_GetCounter + * + * @brief Gets the RTC counter value + * + * @return RTC counter value + */ +uint32_t RTC_GetCounter(void) +{ + uint16_t high1a = 0, high1b = 0, high2a = 0, high2b = 0; + uint16_t low1 = 0, low2 = 0; + + do{ + high1a = RTC->CNTH; + high1b = RTC->CNTH; + }while( high1a != high1b ); + + do{ + low1 = RTC->CNTL; + low2 = RTC->CNTL; + }while( low1 != low2 ); + + do{ + high2a = RTC->CNTH; + high2b = RTC->CNTH; + }while( high2a != high2b ); + + if(high1b != high2b) + { + do{ + low1 = RTC->CNTL; + low2 = RTC->CNTL; + }while( low1 != low2 ); + } + + return (((uint32_t)high2b << 16) | low2); +} + + +/********************************************************************* + * @fn RTC_SetCounter + * + * @brief Sets the RTC counter value. + * + * @param CounterValue - RTC counter new value. + * + * @return RTC counter value + */ +void RTC_SetCounter(uint32_t CounterValue) +{ + RTC_EnterConfigMode(); + RTC->CNTH = CounterValue >> 16; + RTC->CNTL = (CounterValue & RTC_LSB_MASK); + RTC_ExitConfigMode(); +} + +/********************************************************************* + * @fn RTC_SetPrescaler + * + * @brief Sets the RTC prescaler value + * + * @param PrescalerValue - RTC prescaler new value + * + * @return none + */ +void RTC_SetPrescaler(uint32_t PrescalerValue) +{ + RTC_EnterConfigMode(); + RTC->PSCRH = (PrescalerValue & PRLH_MSB_MASK) >> 16; + RTC->PSCRL = (PrescalerValue & RTC_LSB_MASK); + RTC_ExitConfigMode(); +} + +/********************************************************************* + * @fn RTC_SetAlarm + * + * @brief Sets the RTC alarm value + * + * @param AlarmValue - RTC alarm new value + * + * @return none + */ +void RTC_SetAlarm(uint32_t AlarmValue) +{ + RTC_EnterConfigMode(); + RTC->ALRMH = AlarmValue >> 16; + RTC->ALRML = (AlarmValue & RTC_LSB_MASK); + RTC_ExitConfigMode(); +} + +/********************************************************************* + * @fn RTC_GetDivider + * + * @brief Gets the RTC divider value + * + * @return RTC Divider value + */ +uint32_t RTC_GetDivider(void) +{ + uint16_t high1a = 0, high1b = 0, high2a = 0, high2b = 0; + uint16_t low1 = 0, low2 = 0; + + do{ + high1a = RTC->DIVH; + high1b = RTC->DIVH; + }while( high1a != high1b ); + + do{ + low1 = RTC->DIVL; + low2 = RTC->DIVL; + }while( low1 != low2 ); + + do{ + high2a = RTC->DIVH; + high2b = RTC->DIVH; + }while( high2a != high2b ); + + if(high1b != high2b) + { + do{ + low1 = RTC->DIVL; + low2 = RTC->DIVL; + }while( low1 != low2 ); + } + + return ((((uint32_t)high2b & (uint32_t)0x000F) << 16) | low2); +} + +/********************************************************************* + * @fn RTC_WaitForLastTask + * + * @brief Waits until last write operation on RTC registers has finished + * Note- + * This function must be called before any write to RTC registers. + * @return none + */ +void RTC_WaitForLastTask(void) +{ + while((RTC->CTLRL & RTC_FLAG_RTOFF) == (uint16_t)RESET) + { + } +} + +/********************************************************************* + * @fn RTC_WaitForSynchro + * + * @brief Waits until the RTC registers are synchronized with RTC APB clock + * Note- + * This function must be called before any read operation after an APB reset + * or an APB clock stop. + * + * @return none + */ +void RTC_WaitForSynchro(void) +{ + RTC->CTLRL &= (uint16_t)~RTC_FLAG_RSF; + while((RTC->CTLRL & RTC_FLAG_RSF) == (uint16_t)RESET) + { + } +} + +/********************************************************************* + * @fn RTC_GetFlagStatus + * + * @brief Checks whether the specified RTC flag is set or not + * + * @param RTC_FLAG- specifies the flag to check + * RTC_FLAG_RTOFF - RTC Operation OFF flag + * RTC_FLAG_RSF - Registers Synchronized flag + * RTC_FLAG_OW - Overflow flag + * RTC_FLAG_ALR - Alarm flag + * RTC_FLAG_SEC - Second flag + * + * @return The new state of RTC_FLAG (SET or RESET) + */ +FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG) +{ + FlagStatus bitstatus = RESET; + if((RTC->CTLRL & RTC_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/********************************************************************* + * @fn RTC_ClearFlag + * + * @brief Clears the RTC's pending flags + * + * @param RTC_FLAG - specifies the flag to clear + * RTC_FLAG_RSF - Registers Synchronized flag + * RTC_FLAG_OW - Overflow flag + * RTC_FLAG_ALR - Alarm flag + * RTC_FLAG_SEC - Second flag + * + * @return none + */ +void RTC_ClearFlag(uint16_t RTC_FLAG) +{ + RTC->CTLRL &= (uint16_t)~RTC_FLAG; +} + +/********************************************************************* + * @fn RTC_GetITStatus + * + * @brief Checks whether the specified RTC interrupt has occurred or not + * + * @param RTC_IT - specifies the RTC interrupts sources to check + * RTC_FLAG_OW - Overflow interrupt + * RTC_FLAG_ALR - Alarm interrupt + * RTC_FLAG_SEC - Second interrupt + * + * @return The new state of the RTC_IT (SET or RESET) + */ +ITStatus RTC_GetITStatus(uint16_t RTC_IT) +{ + ITStatus bitstatus = RESET; + + bitstatus = (ITStatus)(RTC->CTLRL & RTC_IT); + if(((RTC->CTLRH & RTC_IT) != (uint16_t)RESET) && (bitstatus != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/********************************************************************* + * @fn RTC_ClearITPendingBit + * + * @brief Clears the RTC's interrupt pending bits + * + * @param RTC_IT - specifies the interrupt pending bit to clear + * RTC_FLAG_OW - Overflow interrupt + * RTC_FLAG_ALR - Alarm interrupt + * RTC_FLAG_SEC - Second interrupt + * + * @return none + */ +void RTC_ClearITPendingBit(uint16_t RTC_IT) +{ + RTC->CTLRL &= (uint16_t)~RTC_IT; +} + +#if defined(CH32V20x_D8) || defined(CH32V20x_D8W) +/******************************************************************************* + * @fn Calibration_LSI + * + * @brief LSI calibration + * + * @param cali_Lv : calibration level + * Level_32 - 1.2ms 1100ppm + * Level_64 - 2.2ms 1000ppm + * Level_128 - 4.2ms 800ppm + * + * @return None + */ +void Calibration_LSI(Cali_LevelTypeDef cali_Lv) +{ + uint32_t i; + int32_t cnt_offset; + int32_t Freq = 0; + uint8_t retry = 0; + uint8_t retry_all = 0; + uint32_t cnt_32k = 0; + Freq = SystemCoreClock; + // Coarse tuning + OSC->LSI32K_CAL_CFG &= ~RB_OSC_CNT_VLU; + OSC->LSI32K_CAL_CFG |= 0; + while(1) + { + retry_all++; + while(1) + { + OSC->LSI32K_CAL_CTRL |= RB_OSC_CAL_EN; + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_CNT_OV; + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_IF_END; + while(!(OSC->LSI32K_CAL_STATR & RB_OSC_CAL_IF_END)); + i = OSC->LSI32K_CAL_STATR; + OSC->LSI32K_CAL_CTRL &= ~RB_OSC_CAL_EN; + OSC->LSI32K_CAL_CTRL |= RB_OSC_CAL_EN; + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_CNT_OV; + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_IF_END; + cnt_32k = RTC_GetCounter(); + while(RTC_GetCounter() == cnt_32k); + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_CNT_OV; + while(OSC->LSI32K_CAL_STATR & RB_OSC_CAL_IF_END); + while(!(OSC->LSI32K_CAL_STATR & RB_OSC_CAL_IF_END)); + i = OSC->LSI32K_CAL_STATR; + cnt_offset = (i & 0x3FFF) + OSC->LSI32K_CAL_OV_CNT * 0x3FFF - 2000 * (Freq / 1000) / CAB_LSIFQ; + if(((cnt_offset > -(20 * (Freq / 1000) / 36000)) && (cnt_offset < (20 * (Freq / 1000) / 36000))) || retry > 2) + break; + retry++; + cnt_offset = (cnt_offset > 0) ? (((cnt_offset * 2) / (40 * (Freq / 1000) / 36000)) + 1) / 2 : (((cnt_offset * 2) / (40 * (Freq / 1000) / 36000)) - 1) / 2; + OSC->LSI32K_TUNE += cnt_offset; + } + OSC->LSI32K_CAL_CFG &= ~RB_OSC_CNT_VLU; + OSC->LSI32K_CAL_CFG |= 2; + OSC->LSI32K_CAL_CTRL &= ~RB_OSC_CAL_EN; + OSC->LSI32K_CAL_CTRL |= RB_OSC_CAL_EN; + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_IF_END; + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_CNT_OV; + + // Fine tuning + // After configuring the fine-tuning parameters, discard the two captured values (software behavior) and judge once, only one time is left here + while(!(OSC->LSI32K_CAL_STATR & RB_OSC_CAL_IF_END)); + i = OSC->LSI32K_CAL_STATR; + OSC->LSI32K_CAL_CTRL &= ~RB_OSC_CAL_EN; + OSC->LSI32K_CAL_CTRL |= RB_OSC_CAL_EN; + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_IF_END; + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_CNT_OV; + cnt_32k = RTC_GetCounter(); + while(RTC_GetCounter() == cnt_32k); + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_CNT_OV; + while(OSC->LSI32K_CAL_STATR & RB_OSC_CAL_IF_END); + while(!(OSC->LSI32K_CAL_STATR & RB_OSC_CAL_IF_END)); + i = OSC->LSI32K_CAL_STATR; + cnt_offset = (i & 0x3FFF) + OSC->LSI32K_CAL_OV_CNT * 0x3FFF - 8000 * (1 << 2) * (Freq / 1000000) / 256 * 1000 / (CAB_LSIFQ / 256); + cnt_offset = (cnt_offset > 0) ? ((((cnt_offset * 2 * 100) / (748 * ((1 << 2) / 4) * (Freq / 1000) / 36000)) + 1) / 2) : ((((cnt_offset * 2 * 100) / (748 * ((1 << 2) / 4) * (Freq / 1000) / 36000)) - 1) / 2); + if((cnt_offset > 0)&&(((OSC->LSI32K_TUNE>>5)+cnt_offset)>0x7FF)) + { + if(retry_all>2) + { + OSC->LSI32K_TUNE |= (0xFF<<5); + } + else + { + OSC->LSI32K_TUNE = (OSC->LSI32K_TUNE&0x1F)|(0x3FF<<5); + continue; + } + } + else if((cnt_offset < 0)&&((OSC->LSI32K_TUNE>>5)<(-cnt_offset))) + { + if(retry_all>2) + { + OSC->LSI32K_TUNE &= 0x1F; + } + else + { + OSC->LSI32K_TUNE = (OSC->LSI32K_TUNE&0x1F)|(0x7F<<5); + continue; + } + } + else + { + OSC->LSI32K_TUNE += (cnt_offset<<5); + } + OSC->LSI32K_CAL_CFG &= ~RB_OSC_CNT_VLU; + OSC->LSI32K_CAL_CFG |= cali_Lv; + OSC->LSI32K_CAL_CTRL &= ~RB_OSC_CAL_EN; + OSC->LSI32K_CAL_CTRL |= RB_OSC_CAL_EN; + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_IF_END; + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_CNT_OV; + // Fine tuning + // After configuring the fine-tuning parameters, discard the two captured values (software behavior) and judge once, only one time is left here + while(!(OSC->LSI32K_CAL_STATR & RB_OSC_CAL_IF_END)); + i = OSC->LSI32K_CAL_STATR; + OSC->LSI32K_CAL_CTRL &= ~RB_OSC_CAL_EN; + OSC->LSI32K_CAL_CTRL |= RB_OSC_CAL_EN; + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_IF_END; + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_CNT_OV; + cnt_32k = RTC_GetCounter(); + while(RTC_GetCounter() == cnt_32k); + OSC->LSI32K_CAL_STATR |= RB_OSC_CAL_CNT_OV; + while(OSC->LSI32K_CAL_STATR & RB_OSC_CAL_IF_END); + while(!(OSC->LSI32K_CAL_STATR & RB_OSC_CAL_IF_END)); + OSC->LSI32K_CAL_CTRL &= ~RB_OSC_CAL_EN; + i = OSC->LSI32K_CAL_STATR; + cnt_offset = (i & 0x3FFF) + OSC->LSI32K_CAL_OV_CNT * 0x3FFF - 8000 * (1 << cali_Lv) * (Freq / 1000000) / 256 * 1000 / (CAB_LSIFQ / 256); + cnt_offset = (cnt_offset > 0) ? ((((cnt_offset * 2 * 100) / (748 * ((1 << cali_Lv) / 4) * (Freq / 1000) / 36000)) + 1) / 2) : ((((cnt_offset * 2 * 100) / (748 * ((1 << cali_Lv) / 4) * (Freq / 1000) / 36000)) - 1) / 2); + if((cnt_offset > 0)&&(((OSC->LSI32K_TUNE>>5)+cnt_offset)>0x7FF)) + { + if(retry_all>2) + { + OSC->LSI32K_TUNE |= (0xFF<<5); + return; + } + else + { + OSC->LSI32K_TUNE = (OSC->LSI32K_TUNE&0x1F)|(0x3FF<<5); + continue; + } + } + else if((cnt_offset < 0)&&((OSC->LSI32K_TUNE>>5)<(-cnt_offset))) + { + if(retry_all>2) + { + OSC->LSI32K_TUNE &= 0x1F; + return; + } + else + { + OSC->LSI32K_TUNE = (OSC->LSI32K_TUNE&0x1F)|(0x3F<<5); + continue; + } + } + else + { + OSC->LSI32K_TUNE += (cnt_offset<<5); + return; + } + } +} + +#endif diff --git a/gat_stand_fw/periph/src/ch32v20x_spi.c b/gat_stand_fw/periph/src/ch32v20x_spi.c new file mode 100644 index 0000000..8b845a5 --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_spi.c @@ -0,0 +1,660 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_spi.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the SPI firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_spi.h" +#include "ch32v20x_rcc.h" + +/* SPI SPE mask */ +#define CTLR1_SPE_Set ((uint16_t)0x0040) +#define CTLR1_SPE_Reset ((uint16_t)0xFFBF) + +/* I2S I2SE mask */ +#define I2SCFGR_I2SE_Set ((uint16_t)0x0400) +#define I2SCFGR_I2SE_Reset ((uint16_t)0xFBFF) + +/* SPI CRCNext mask */ +#define CTLR1_CRCNext_Set ((uint16_t)0x1000) + +/* SPI CRCEN mask */ +#define CTLR1_CRCEN_Set ((uint16_t)0x2000) +#define CTLR1_CRCEN_Reset ((uint16_t)0xDFFF) + +/* SPI SSOE mask */ +#define CTLR2_SSOE_Set ((uint16_t)0x0004) +#define CTLR2_SSOE_Reset ((uint16_t)0xFFFB) + +/* SPI registers Masks */ +#define CTLR1_CLEAR_Mask ((uint16_t)0x3040) +#define I2SCFGR_CLEAR_Mask ((uint16_t)0xF040) + +/* SPI or I2S mode selection masks */ +#define SPI_Mode_Select ((uint16_t)0xF7FF) +#define I2S_Mode_Select ((uint16_t)0x0800) + +/* I2S clock source selection masks */ +#define I2S2_CLOCK_SRC ((uint32_t)(0x00020000)) +#define I2S3_CLOCK_SRC ((uint32_t)(0x00040000)) +#define I2S_MUL_MASK ((uint32_t)(0x0000F000)) +#define I2S_DIV_MASK ((uint32_t)(0x000000F0)) + +/********************************************************************* + * @fn SPI_I2S_DeInit + * + * @brief Deinitializes the SPIx peripheral registers to their default + * reset values (Affects also the I2Ss). + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * + * @return none + */ +void SPI_I2S_DeInit(SPI_TypeDef *SPIx) +{ + if(SPIx == SPI1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE); + } + else if(SPIx == SPI2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE); + } +} + +/********************************************************************* + * @fn SPI_Init + * + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the SPI_InitStruct. + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * SPI_InitStruct - pointer to a SPI_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral. + * + * @return none + */ +void SPI_Init(SPI_TypeDef *SPIx, SPI_InitTypeDef *SPI_InitStruct) +{ + uint16_t tmpreg = 0; + + tmpreg = SPIx->CTLR1; + tmpreg &= CTLR1_CLEAR_Mask; + tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode | + SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL | + SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS | + SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit); + + SPIx->CTLR1 = tmpreg; + SPIx->I2SCFGR &= SPI_Mode_Select; + SPIx->CRCR = SPI_InitStruct->SPI_CRCPolynomial; +} + +/********************************************************************* + * @fn I2S_Init + * + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the I2S_InitStruct. + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * (configured in I2S mode). + * I2S_InitStruct - pointer to an I2S_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral + * configured in I2S mode. + * + * @return none + */ +void I2S_Init(SPI_TypeDef *SPIx, I2S_InitTypeDef *I2S_InitStruct) +{ + uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1; + uint32_t tmp = 0; + RCC_ClocksTypeDef RCC_Clocks; + uint32_t sourceclock = 0; + + SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask; + SPIx->I2SPR = 0x0002; + tmpreg = SPIx->I2SCFGR; + + if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) + { + i2sodd = (uint16_t)0; + i2sdiv = (uint16_t)2; + } + else + { + if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) + { + packetlength = 1; + } + else + { + packetlength = 2; + } + + if(((uint32_t)SPIx) == SPI2_BASE) + { + tmp = I2S2_CLOCK_SRC; + } + else + { + tmp = I2S3_CLOCK_SRC; + } + + RCC_GetClocksFreq(&RCC_Clocks); + + sourceclock = RCC_Clocks.SYSCLK_Frequency; + + if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) + { + tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + else + { + tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + + tmp = tmp / 10; + i2sodd = (uint16_t)(tmp & (uint16_t)0x0001); + i2sdiv = (uint16_t)((tmp - i2sodd) / 2); + i2sodd = (uint16_t)(i2sodd << 8); + } + + if((i2sdiv < 2) || (i2sdiv > 0xFF)) + { + i2sdiv = 2; + i2sodd = 0; + } + + SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput)); + tmpreg |= (uint16_t)(I2S_Mode_Select | (uint16_t)(I2S_InitStruct->I2S_Mode | + (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | + (uint16_t)I2S_InitStruct->I2S_CPOL)))); + SPIx->I2SCFGR = tmpreg; +} + +/********************************************************************* + * @fn SPI_StructInit + * + * @brief Fills each SPI_InitStruct member with its default value. + * + * @param SPI_InitStruct - pointer to a SPI_InitTypeDef structure which + * will be initialized. + * + * @return none + */ +void SPI_StructInit(SPI_InitTypeDef *SPI_InitStruct) +{ + SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex; + SPI_InitStruct->SPI_Mode = SPI_Mode_Slave; + SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b; + SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low; + SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge; + SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; + SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB; + SPI_InitStruct->SPI_CRCPolynomial = 7; +} + +/********************************************************************* + * @fn I2S_StructInit + * + * @brief Fills each I2S_InitStruct member with its default value. + * + * @param I2S_InitStruct - pointer to a I2S_InitTypeDef structure which + * will be initialized. + * + * @return none + */ +void I2S_StructInit(I2S_InitTypeDef *I2S_InitStruct) +{ + I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx; + I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips; + I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b; + I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable; + I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default; + I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low; +} + +/********************************************************************* + * @fn SPI_Cmd + * + * @brief Enables or disables the specified SPI peripheral. + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void SPI_Cmd(SPI_TypeDef *SPIx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + SPIx->CTLR1 |= CTLR1_SPE_Set; + } + else + { + SPIx->CTLR1 &= CTLR1_SPE_Reset; + } +} + +/********************************************************************* + * @fn I2S_Cmd + * + * @brief Enables or disables the specified SPI peripheral (in I2S mode). + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void I2S_Cmd(SPI_TypeDef *SPIx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + SPIx->I2SCFGR |= I2SCFGR_I2SE_Set; + } + else + { + SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset; + } +} + +/********************************************************************* + * @fn SPI_I2S_ITConfig + * + * @brief Enables or disables the specified SPI/I2S interrupts. + * + * @param SPIx - where x can be + * - 1, 2 or 3 in SPI mode. + * - 2 or 3 in I2S mode. + * SPI_I2S_IT - specifies the SPI/I2S interrupt source to be + * enabled or disabled. + * SPI_I2S_IT_TXE - Tx buffer empty interrupt mask. + * SPI_I2S_IT_RXNE - Rx buffer not empty interrupt mask. + * SPI_I2S_IT_ERR - Error interrupt mask. + * NewState: ENABLE or DISABLE. + * @return none + */ +void SPI_I2S_ITConfig(SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState) +{ + uint16_t itpos = 0, itmask = 0; + + itpos = SPI_I2S_IT >> 4; + itmask = (uint16_t)1 << (uint16_t)itpos; + + if(NewState != DISABLE) + { + SPIx->CTLR2 |= itmask; + } + else + { + SPIx->CTLR2 &= (uint16_t)~itmask; + } +} + +/********************************************************************* + * @fn SPI_I2S_DMACmd + * + * @brief Enables or disables the SPIx/I2Sx DMA interface. + * + * @param SPIx - where x can be + * - 1, 2 or 3 in SPI mode. + * - 2 or 3 in I2S mode. + * SPI_I2S_DMAReq - specifies the SPI/I2S DMA transfer request to + * be enabled or disabled. + * SPI_I2S_DMAReq_Tx - Tx buffer DMA transfer request. + * SPI_I2S_DMAReq_Rx - Rx buffer DMA transfer request. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void SPI_I2S_DMACmd(SPI_TypeDef *SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + SPIx->CTLR2 |= SPI_I2S_DMAReq; + } + else + { + SPIx->CTLR2 &= (uint16_t)~SPI_I2S_DMAReq; + } +} + +/********************************************************************* + * @fn SPI_I2S_SendData + * + * @brief Transmits a Data through the SPIx/I2Sx peripheral. + * + * @param SPIx - where x can be + * - 1, 2 or 3 in SPI mode. + * - 2 or 3 in I2S mode. + * Data - Data to be transmitted. + * + * @return none + */ +void SPI_I2S_SendData(SPI_TypeDef *SPIx, uint16_t Data) +{ + SPIx->DATAR = Data; +} + +/********************************************************************* + * @fn SPI_I2S_ReceiveData + * + * @brief Returns the most recent received data by the SPIx/I2Sx peripheral. + * + * @param SPIx - where x can be + * - 1, 2 or 3 in SPI mode. + * - 2 or 3 in I2S mode. + * Data - Data to be transmitted. + * + * @return SPIx->DATAR - The value of the received data. + */ +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef *SPIx) +{ + return SPIx->DATAR; +} + +/********************************************************************* + * @fn SPI_NSSInternalSoftwareConfig + * + * @brief Configures internally by software the NSS pin for the selected SPI. + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * SPI_NSSInternalSoft - + * SPI_NSSInternalSoft_Set - Set NSS pin internally. + * SPI_NSSInternalSoft_Reset - Reset NSS pin internally. + * + * @return none + */ +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef *SPIx, uint16_t SPI_NSSInternalSoft) +{ + if(SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset) + { + SPIx->CTLR1 |= SPI_NSSInternalSoft_Set; + } + else + { + SPIx->CTLR1 &= SPI_NSSInternalSoft_Reset; + } +} + +/********************************************************************* + * @fn SPI_SSOutputCmd + * + * @brief Enables or disables the SS output for the selected SPI. + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * NewState - new state of the SPIx SS output. + * + * @return none + */ +void SPI_SSOutputCmd(SPI_TypeDef *SPIx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + SPIx->CTLR2 |= CTLR2_SSOE_Set; + } + else + { + SPIx->CTLR2 &= CTLR2_SSOE_Reset; + } +} + +/********************************************************************* + * @fn SPI_DataSizeConfig + * + * @brief Configures the data size for the selected SPI. + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * SPI_DataSize - specifies the SPI data size. + * SPI_DataSize_16b - Set data frame format to 16bit. + * SPI_DataSize_8b - Set data frame format to 8bit. + * + * @return none + */ +void SPI_DataSizeConfig(SPI_TypeDef *SPIx, uint16_t SPI_DataSize) +{ + SPIx->CTLR1 &= (uint16_t)~SPI_DataSize_16b; + SPIx->CTLR1 |= SPI_DataSize; +} + +/********************************************************************* + * @fn SPI_TransmitCRC + * + * @brief Transmit the SPIx CRC value. + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * + * @return none + */ +void SPI_TransmitCRC(SPI_TypeDef *SPIx) +{ + SPIx->CTLR1 |= CTLR1_CRCNext_Set; +} + +/********************************************************************* + * @fn SPI_CalculateCRC + * + * @brief Enables or disables the CRC value calculation of the transferred bytes. + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * NewState - new state of the SPIx CRC value calculation. + * + * @return none + */ +void SPI_CalculateCRC(SPI_TypeDef *SPIx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + SPIx->CTLR1 |= CTLR1_CRCEN_Set; + } + else + { + SPIx->CTLR1 &= CTLR1_CRCEN_Reset; + } +} + +/********************************************************************* + * @fn SPI_GetCRC + * + * @brief Returns the transmit or the receive CRC register value for the specified SPI. + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * SPI_CRC - specifies the CRC register to be read. + * SPI_CRC_Tx - Selects Tx CRC register. + * SPI_CRC_Rx - Selects Rx CRC register. + * + * @return crcreg: The selected CRC register value. + */ +uint16_t SPI_GetCRC(SPI_TypeDef *SPIx, uint8_t SPI_CRC) +{ + uint16_t crcreg = 0; + + if(SPI_CRC != SPI_CRC_Rx) + { + crcreg = SPIx->TCRCR; + } + else + { + crcreg = SPIx->RCRCR; + } + + return crcreg; +} + +/********************************************************************* + * @fn SPI_GetCRCPolynomial + * + * @brief Returns the CRC Polynomial register value for the specified SPI. + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * + * @return SPIx->CRCR - The CRC Polynomial register value. + */ +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef *SPIx) +{ + return SPIx->CRCR; +} + +/********************************************************************* + * @fn SPI_BiDirectionalLineConfig + * + * @brief Selects the data transfer direction in bi-directional mode + * for the specified SPI. + * + * @param SPIx - where x can be 1, 2 or 3 to select the SPI peripheral. + * SPI_Direction - specifies the data transfer direction in + * bi-directional mode. + * SPI_Direction_Tx - Selects Tx transmission direction. + * SPI_Direction_Rx - Selects Rx receive direction. + * + * @return none + */ +void SPI_BiDirectionalLineConfig(SPI_TypeDef *SPIx, uint16_t SPI_Direction) +{ + if(SPI_Direction == SPI_Direction_Tx) + { + SPIx->CTLR1 |= SPI_Direction_Tx; + } + else + { + SPIx->CTLR1 &= SPI_Direction_Rx; + } +} + +/********************************************************************* + * @fn SPI_I2S_GetFlagStatus + * + * @brief Checks whether the specified SPI/I2S flag is set or not. + * + * @param SPIx - where x can be + * - 1, 2 or 3 in SPI mode. + * - 2 or 3 in I2S mode. + * SPI_I2S_FLAG - specifies the SPI/I2S flag to check. + * SPI_I2S_FLAG_TXE - Transmit buffer empty flag. + * SPI_I2S_FLAG_RXNE - Receive buffer not empty flag. + * SPI_I2S_FLAG_BSY - Busy flag. + * SPI_I2S_FLAG_OVR - Overrun flag. + * SPI_FLAG_MODF - Mode Fault flag. + * SPI_FLAG_CRCERR - CRC Error flag. + * I2S_FLAG_UDR - Underrun Error flag. + * I2S_FLAG_CHSIDE - Channel Side flag. + * + * @return FlagStatus: SET or RESET. + */ +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef *SPIx, uint16_t SPI_I2S_FLAG) +{ + FlagStatus bitstatus = RESET; + + if((SPIx->STATR & SPI_I2S_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn SPI_I2S_ClearFlag + * + * @brief Clears the SPIx CRC Error (CRCERR) flag. + * + * @param SPIx - where x can be + * - 1, 2 or 3 in SPI mode. + * - 2 or 3 in I2S mode. + * SPI_I2S_FLAG - specifies the SPI flag to clear. + * SPI_FLAG_CRCERR - CRC Error flag. + * Note- + * - OVR (OverRun error) flag is cleared by software sequence: a read + * operation to SPI_DATAR register (SPI_I2S_ReceiveData()) followed by a read + * operation to SPI_STATR register (SPI_I2S_GetFlagStatus()). + * - UDR (UnderRun error) flag is cleared by a read operation to + * SPI_STATR register (SPI_I2S_GetFlagStatus()). + * - MODF (Mode Fault) flag is cleared by software sequence: a read/write + * operation to SPI_STATR register (SPI_I2S_GetFlagStatus()) followed by a + * write operation to SPI_CTLR1 register (SPI_Cmd() to enable the SPI). + * @return FlagStatus: SET or RESET. + */ +void SPI_I2S_ClearFlag(SPI_TypeDef *SPIx, uint16_t SPI_I2S_FLAG) +{ + SPIx->STATR = (uint16_t)~SPI_I2S_FLAG; +} + +/********************************************************************* + * @fn SPI_I2S_GetITStatus + * + * @brief Checks whether the specified SPI/I2S interrupt has occurred or not. + * + * @param SPIx - where x can be + * - 1, 2 or 3 in SPI mode. + * - 2 or 3 in I2S mode. + * SPI_I2S_IT - specifies the SPI/I2S interrupt source to check.. + * SPI_I2S_IT_TXE - Transmit buffer empty interrupt. + * SPI_I2S_IT_RXNE - Receive buffer not empty interrupt. + * SPI_I2S_IT_OVR - Overrun interrupt. + * SPI_IT_MODF - Mode Fault interrupt. + * SPI_IT_CRCERR - CRC Error interrupt. + * I2S_IT_UDR - Underrun Error interrupt. + * + * @return FlagStatus: SET or RESET. + */ +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itpos = 0, itmask = 0, enablestatus = 0; + + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + itmask = SPI_I2S_IT >> 4; + itmask = 0x01 << itmask; + enablestatus = (SPIx->CTLR2 & itmask); + + if(((SPIx->STATR & itpos) != (uint16_t)RESET) && enablestatus) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn SPI_I2S_ClearITPendingBit + * + * @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit. + * + * @param SPIx - where x can be + * - 1, 2 or 3 in SPI mode. + * SPI_I2S_IT - specifies the SPI interrupt pending bit to clear. + * SPI_IT_CRCERR - CRC Error interrupt. + * Note- + * - OVR (OverRun Error) interrupt pending bit is cleared by software + * sequence: a read operation to SPI_DATAR register (SPI_I2S_ReceiveData()) + * followed by a read operation to SPI_STATR register (SPI_I2S_GetITStatus()). + * - UDR (UnderRun Error) interrupt pending bit is cleared by a read + * operation to SPI_STATR register (SPI_I2S_GetITStatus()). + * - MODF (Mode Fault) interrupt pending bit is cleared by software sequence: + * a read/write operation to SPI_STATR register (SPI_I2S_GetITStatus()) + * followed by a write operation to SPI_CTLR1 register (SPI_Cmd() to enable + * the SPI). + * @return none + */ +void SPI_I2S_ClearITPendingBit(SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT) +{ + uint16_t itpos = 0; + + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + SPIx->STATR = (uint16_t)~itpos; +} diff --git a/gat_stand_fw/periph/src/ch32v20x_tim.c b/gat_stand_fw/periph/src/ch32v20x_tim.c new file mode 100644 index 0000000..e0e4b52 --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_tim.c @@ -0,0 +1,2353 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_tim.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the TIM firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_tim.h" +#include "ch32v20x_rcc.h" + +/* TIM registers bit mask */ +#define SMCFGR_ETR_Mask ((uint16_t)0x00FF) +#define CHCTLR_Offset ((uint16_t)0x0018) +#define CCER_CCE_Set ((uint16_t)0x0001) +#define CCER_CCNE_Set ((uint16_t)0x0004) + +static void TI1_Config(TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI2_Config(TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI3_Config(TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI4_Config(TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); + +/********************************************************************* + * @fn TIM_DeInit + * + * @brief Deinitializes the TIMx peripheral registers to their default + * reset values. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * + * @return none + */ +void TIM_DeInit(TIM_TypeDef *TIMx) +{ + if(TIMx == TIM1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); + } + else if(TIMx == TIM2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); + } + else if(TIMx == TIM3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); + } + else if(TIMx == TIM4) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); + } + else if(TIMx == TIM5) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE); + } +} + +/********************************************************************* + * @fn TIM_TimeBaseInit + * + * @brief Initializes the TIMx Time Base Unit peripheral according to + * the specified parameters in the TIM_TimeBaseInitStruct. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_TimeBaseInitStruct - pointer to a TIM_TimeBaseInitTypeDef + * structure. + * + * @return none + */ +void TIM_TimeBaseInit(TIM_TypeDef *TIMx, TIM_TimeBaseInitTypeDef *TIM_TimeBaseInitStruct) +{ + uint16_t tmpcr1 = 0; + + tmpcr1 = TIMx->CTLR1; + + if((TIMx == TIM1) || (TIMx == TIM2) || (TIMx == TIM3) || (TIMx == TIM4) || (TIMx == TIM5)) + { + tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_DIR | TIM_CMS))); + tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode; + } + + tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CTLR1_CKD)); + tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision; + + TIMx->CTLR1 = tmpcr1; + TIMx->ATRLR = TIM_TimeBaseInitStruct->TIM_Period; + TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; + + if((TIMx == TIM1)) + { + TIMx->RPTCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; + } + + TIMx->SWEVGR = TIM_PSCReloadMode_Immediate; +} + +/********************************************************************* + * @fn TIM_OC1Init + * + * @brief Initializes the TIMx Channel1 according to the specified + * parameters in the TIM_OCInitStruct. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCInitStruct - pointer to a TIM_OCInitTypeDef structure. + * + * @return none + */ +void TIM_OC1Init(TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + TIMx->CCER &= (uint16_t)(~(uint16_t)TIM_CC1E); + tmpccer = TIMx->CCER; + tmpcr2 = TIMx->CTLR2; + tmpccmrx = TIMx->CHCTLR1; + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_OC1M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CC1S)); + tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; + tmpccer &= (uint16_t)(~((uint16_t)TIM_CC1P)); + tmpccer |= TIM_OCInitStruct->TIM_OCPolarity; + tmpccer |= TIM_OCInitStruct->TIM_OutputState; + + if((TIMx == TIM1)) + { + tmpccer &= (uint16_t)(~((uint16_t)TIM_CC1NP)); + tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity; + + tmpccer &= (uint16_t)(~((uint16_t)TIM_CC1NE)); + tmpccer |= TIM_OCInitStruct->TIM_OutputNState; + + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_OIS1)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_OIS1N)); + + tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState; + tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState; + } + + TIMx->CTLR2 = tmpcr2; + TIMx->CHCTLR1 = tmpccmrx; + TIMx->CH1CVR = TIM_OCInitStruct->TIM_Pulse; + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TIM_OC2Init + * + * @brief Initializes the TIMx Channel2 according to the specified + * parameters in the TIM_OCInitStruct. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCInitStruct - pointer to a TIM_OCInitTypeDef structure. + * + * @return none + */ +void TIM_OC2Init(TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CC2E)); + tmpccer = TIMx->CCER; + tmpcr2 = TIMx->CTLR2; + tmpccmrx = TIMx->CHCTLR1; + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_OC2M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CC2S)); + tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); + tmpccer &= (uint16_t)(~((uint16_t)TIM_CC2P)); + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4); + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4); + + if((TIMx == TIM1)) + { + tmpccer &= (uint16_t)(~((uint16_t)TIM_CC2NP)); + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4); + tmpccer &= (uint16_t)(~((uint16_t)TIM_CC2NE)); + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4); + + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_OIS2)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_OIS2N)); + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2); + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2); + } + + TIMx->CTLR2 = tmpcr2; + TIMx->CHCTLR1 = tmpccmrx; + TIMx->CH2CVR = TIM_OCInitStruct->TIM_Pulse; + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TIM_OC3Init + * + * @brief Initializes the TIMx Channel3 according to the specified + * parameters in the TIM_OCInitStruct. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCInitStruct - pointer to a TIM_OCInitTypeDef structure. + * + * @return none + */ +void TIM_OC3Init(TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CC3E)); + tmpccer = TIMx->CCER; + tmpcr2 = TIMx->CTLR2; + tmpccmrx = TIMx->CHCTLR2; + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_OC3M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CC3S)); + tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; + tmpccer &= (uint16_t)(~((uint16_t)TIM_CC3P)); + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8); + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8); + + if((TIMx == TIM1)) + { + tmpccer &= (uint16_t)(~((uint16_t)TIM_CC3NP)); + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8); + tmpccer &= (uint16_t)(~((uint16_t)TIM_CC3NE)); + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_OIS3)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_OIS3N)); + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4); + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4); + } + + TIMx->CTLR2 = tmpcr2; + TIMx->CHCTLR2 = tmpccmrx; + TIMx->CH3CVR = TIM_OCInitStruct->TIM_Pulse; + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TIM_OC4Init + * + * @brief Initializes the TIMx Channel4 according to the specified + * parameters in the TIM_OCInitStruct. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCInitStruct - pointer to a TIM_OCInitTypeDef structure. + * + * @return none + */ +void TIM_OC4Init(TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CC4E)); + tmpccer = TIMx->CCER; + tmpcr2 = TIMx->CTLR2; + tmpccmrx = TIMx->CHCTLR2; + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_OC4M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CC4S)); + tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); + tmpccer &= (uint16_t)(~((uint16_t)TIM_CC4P)); + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12); + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12); + + if((TIMx == TIM1)) + { + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_OIS4)); + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6); + } + + TIMx->CTLR2 = tmpcr2; + TIMx->CHCTLR2 = tmpccmrx; + TIMx->CH4CVR = TIM_OCInitStruct->TIM_Pulse; + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TIM_ICInit + * + * @brief IInitializes the TIM peripheral according to the specified + * parameters in the TIM_ICInitStruct. + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_ICInitStruct - pointer to a TIM_ICInitTypeDef structure. + * + * @return none + */ +void TIM_ICInit(TIM_TypeDef *TIMx, TIM_ICInitTypeDef *TIM_ICInitStruct) +{ + if(TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) + { + TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else if(TIM_ICInitStruct->TIM_Channel == TIM_Channel_2) + { + TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else if(TIM_ICInitStruct->TIM_Channel == TIM_Channel_3) + { + TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else + { + TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } +} + +/********************************************************************* + * @fn TIM_PWMIConfig + * + * @brief Configures the TIM peripheral according to the specified + * parameters in the TIM_ICInitStruct to measure an external + * PWM signal. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_ICInitStruct - pointer to a TIM_ICInitTypeDef structure. + * + * @return none + */ +void TIM_PWMIConfig(TIM_TypeDef *TIMx, TIM_ICInitTypeDef *TIM_ICInitStruct) +{ + uint16_t icoppositepolarity = TIM_ICPolarity_Rising; + uint16_t icoppositeselection = TIM_ICSelection_DirectTI; + + if(TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising) + { + icoppositepolarity = TIM_ICPolarity_Falling; + } + else + { + icoppositepolarity = TIM_ICPolarity_Rising; + } + + if(TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI) + { + icoppositeselection = TIM_ICSelection_IndirectTI; + } + else + { + icoppositeselection = TIM_ICSelection_DirectTI; + } + + if(TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) + { + TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else + { + TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } +} + +/********************************************************************* + * @fn TIM_BDTRConfig + * + * @brief Configures the: Break feature, dead time, Lock level, the OSSI, + * the OSSR State and the AOE(automatic output enable). + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_BDTRInitStruct - pointer to a TIM_BDTRInitTypeDef structure. + * + * @return none + */ +void TIM_BDTRConfig(TIM_TypeDef *TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct) +{ + TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState | + TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime | + TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity | + TIM_BDTRInitStruct->TIM_AutomaticOutput; +} + +/********************************************************************* + * @fn TIM_TimeBaseStructInit + * + * @brief Fills each TIM_TimeBaseInitStruct member with its default value. + * + * @param TIM_TimeBaseInitStruct - pointer to a TIM_TimeBaseInitTypeDef structure. + * + * @return none + */ +void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef *TIM_TimeBaseInitStruct) +{ + TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF; + TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000; + TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1; + TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up; + TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000; +} + +/********************************************************************* + * @fn TIM_OCStructInit + * + * @brief Fills each TIM_OCInitStruct member with its default value. + * + * @param TIM_OCInitStruct - pointer to a TIM_OCInitTypeDef structure. + * + * @return none + */ +void TIM_OCStructInit(TIM_OCInitTypeDef *TIM_OCInitStruct) +{ + TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing; + TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable; + TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable; + TIM_OCInitStruct->TIM_Pulse = 0x0000; + TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High; + TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High; + TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset; + TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset; +} + +/********************************************************************* + * @fn TIM_ICStructInit + * + * @brief Fills each TIM_ICInitStruct member with its default value. + * + * @param TIM_ICInitStruct - pointer to a TIM_ICInitTypeDef structure. + * + * @return none + */ +void TIM_ICStructInit(TIM_ICInitTypeDef *TIM_ICInitStruct) +{ + TIM_ICInitStruct->TIM_Channel = TIM_Channel_1; + TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising; + TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI; + TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1; + TIM_ICInitStruct->TIM_ICFilter = 0x00; +} + +/********************************************************************* + * @fn TIM_BDTRStructInit + * + * @brief Fills each TIM_BDTRInitStruct member with its default value. + * + * @param TIM_BDTRInitStruct - pointer to a TIM_BDTRInitTypeDef structure. + * + * @return none + */ +void TIM_BDTRStructInit(TIM_BDTRInitTypeDef *TIM_BDTRInitStruct) +{ + TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable; + TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable; + TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF; + TIM_BDTRInitStruct->TIM_DeadTime = 0x00; + TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable; + TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low; + TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable; +} + +/********************************************************************* + * @fn TIM_Cmd + * + * @brief Enables or disables the specified TIM peripheral. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void TIM_Cmd(TIM_TypeDef *TIMx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + TIMx->CTLR1 |= TIM_CEN; + } + else + { + TIMx->CTLR1 &= (uint16_t)(~((uint16_t)TIM_CEN)); + } +} + +/********************************************************************* + * @fn TIM_CtrlPWMOutputs + * + * @brief Enables or disables the TIM peripheral Main Outputs. + * + * @param TIMx - where x can be 1/8/9/10 to select the TIM peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void TIM_CtrlPWMOutputs(TIM_TypeDef *TIMx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + TIMx->BDTR |= TIM_MOE; + } + else + { + TIMx->BDTR &= (uint16_t)(~((uint16_t)TIM_MOE)); + } +} + +/********************************************************************* + * @fn TIM_ITConfig + * + * @brief Enables or disables the specified TIM interrupts. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_IT - specifies the TIM interrupts sources to be enabled or disabled. + * TIM_IT_Update - TIM update Interrupt source. + * TIM_IT_CC1 - TIM Capture Compare 1 Interrupt source. + * TIM_IT_CC2 - TIM Capture Compare 2 Interrupt source + * TIM_IT_CC3 - TIM Capture Compare 3 Interrupt source. + * TIM_IT_CC4 - TIM Capture Compare 4 Interrupt source. + * TIM_IT_COM - TIM Commutation Interrupt source. + * TIM_IT_Trigger - TIM Trigger Interrupt source. + * TIM_IT_Break - TIM Break Interrupt source. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void TIM_ITConfig(TIM_TypeDef *TIMx, uint16_t TIM_IT, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + TIMx->DMAINTENR |= TIM_IT; + } + else + { + TIMx->DMAINTENR &= (uint16_t)~TIM_IT; + } +} + +/******************************************************************************* + * @fn TIM_GenerateEvent + * + * @brief Configures the TIMx event to be generate by software. + * + * @param TIMx: where x can be 1 to 4 to select the TIM peripheral. + * TIM_EventSource: specifies the event source. + * TIM_EventSource_Update: Timer update Event source. + * TIM_EventSource_CC1: Timer Capture Compare 1 Event source. + * TIM_EventSource_CC2: Timer Capture Compare 2 Event source. + * TIM_EventSource_CC3: Timer Capture Compare 3 Event source. + * TIM_EventSource_CC4: Timer Capture Compare 4 Event source. + * TIM_EventSource_COM: Timer COM event source. + * TIM_EventSource_Trigger: Timer Trigger Event source. + * TIM_EventSource_Break: Timer Break event source. + * + * @return None + */ +void TIM_GenerateEvent(TIM_TypeDef *TIMx, uint16_t TIM_EventSource) +{ + TIMx->SWEVGR = TIM_EventSource; +} + +/********************************************************************* + * @fn TIM_DMAConfig + * + * @brief Configures the TIMx's DMA interface. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_DMABase: DMA Base address. + * TIM_DMABase_CR. + * TIM_DMABase_CR2. + * TIM_DMABase_SMCR. + * TIM_DMABase_DIER. + * TIM1_DMABase_SR. + * TIM_DMABase_EGR. + * TIM_DMABase_CCMR1. + * TIM_DMABase_CCMR2. + * TIM_DMABase_CCER. + * TIM_DMABase_CNT. + * TIM_DMABase_PSC. + * TIM_DMABase_CCR1. + * TIM_DMABase_CCR2. + * TIM_DMABase_CCR3. + * TIM_DMABase_CCR4. + * TIM_DMABase_BDTR. + * TIM_DMABase_DCR. + * TIM_DMABurstLength - DMA Burst length. + * TIM_DMABurstLength_1Transfer. + * TIM_DMABurstLength_18Transfers. + * + * @return none + */ +void TIM_DMAConfig(TIM_TypeDef *TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength) +{ + TIMx->DMACFGR = TIM_DMABase | TIM_DMABurstLength; +} + +/********************************************************************* + * @fn TIM_DMACmd + * + * @brief Enables or disables the TIMx's DMA Requests. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_DMASource - specifies the DMA Request sources. + * TIM_DMA_Update - TIM update Interrupt source. + * TIM_DMA_CC1 - TIM Capture Compare 1 DMA source. + * TIM_DMA_CC2 - TIM Capture Compare 2 DMA source. + * TIM_DMA_CC3 - TIM Capture Compare 3 DMA source. + * TIM_DMA_CC4 - TIM Capture Compare 4 DMA source. + * TIM_DMA_COM - TIM Commutation DMA source. + * TIM_DMA_Trigger - TIM Trigger DMA source. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void TIM_DMACmd(TIM_TypeDef *TIMx, uint16_t TIM_DMASource, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + TIMx->DMAINTENR |= TIM_DMASource; + } + else + { + TIMx->DMAINTENR &= (uint16_t)~TIM_DMASource; + } +} + +/********************************************************************* + * @fn TIM_InternalClockConfig + * + * @brief Configures the TIMx internal Clock. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * + * @return none + */ +void TIM_InternalClockConfig(TIM_TypeDef *TIMx) +{ + TIMx->SMCFGR &= (uint16_t)(~((uint16_t)TIM_SMS)); +} + +/********************************************************************* + * @fn TIM_ITRxExternalClockConfig + * + * @brief Configures the TIMx Internal Trigger as External Clock. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_InputTriggerSource: Trigger source. + * TIM_TS_ITR0 - Internal Trigger 0. + * TIM_TS_ITR1 - Internal Trigger 1. + * TIM_TS_ITR2 - Internal Trigger 2. + * TIM_TS_ITR3 - Internal Trigger 3. + * + * @return none + */ +void TIM_ITRxExternalClockConfig(TIM_TypeDef *TIMx, uint16_t TIM_InputTriggerSource) +{ + TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource); + TIMx->SMCFGR |= TIM_SlaveMode_External1; +} + +/********************************************************************* + * @fn TIM_TIxExternalClockConfig + * + * @brief Configures the TIMx Trigger as External Clock. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_TIxExternalCLKSource - Trigger source. + * TIM_TIxExternalCLK1Source_TI1ED - TI1 Edge Detector. + * TIM_TIxExternalCLK1Source_TI1 - Filtered Timer Input 1. + * TIM_TIxExternalCLK1Source_TI2 - Filtered Timer Input 2. + * TIM_ICPolarity - specifies the TIx Polarity. + * TIM_ICPolarity_Rising. + * TIM_ICPolarity_Falling. + * TIM_DMA_COM - TIM Commutation DMA source. + * TIM_DMA_Trigger - TIM Trigger DMA source. + * ICFilter - specifies the filter value. + * This parameter must be a value between 0x0 and 0xF. + * + * @return none + */ +void TIM_TIxExternalClockConfig(TIM_TypeDef *TIMx, uint16_t TIM_TIxExternalCLKSource, + uint16_t TIM_ICPolarity, uint16_t ICFilter) +{ + if(TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2) + { + TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); + } + else + { + TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); + } + + TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource); + TIMx->SMCFGR |= TIM_SlaveMode_External1; +} + +/********************************************************************* + * @fn TIM_ETRClockMode1Config + * + * @brief Configures the External clock Mode1. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_ExtTRGPrescaler - The external Trigger Prescaler. + * TIM_ExtTRGPSC_OFF - ETRP Prescaler OFF. + * TIM_ExtTRGPSC_DIV2 - ETRP frequency divided by 2. + * TIM_ExtTRGPSC_DIV4 - ETRP frequency divided by 4. + * TIM_ExtTRGPSC_DIV8 - ETRP frequency divided by 8. + * TIM_ExtTRGPolarity - The external Trigger Polarity. + * TIM_ExtTRGPolarity_Inverted - active low or falling edge active. + * TIM_ExtTRGPolarity_NonInverted - active high or rising edge active. + * ExtTRGFilter - External Trigger Filter. + * This parameter must be a value between 0x0 and 0xF. + * + * @return none + */ +void TIM_ETRClockMode1Config(TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter) +{ + uint16_t tmpsmcr = 0; + + TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); + tmpsmcr = TIMx->SMCFGR; + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMS)); + tmpsmcr |= TIM_SlaveMode_External1; + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_TS)); + tmpsmcr |= TIM_TS_ETRF; + TIMx->SMCFGR = tmpsmcr; +} + +/********************************************************************* + * @fn TIM_ETRClockMode2Config + * + * @brief Configures the External clock Mode2. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_ExtTRGPrescaler - The external Trigger Prescaler. + * TIM_ExtTRGPSC_OFF - ETRP Prescaler OFF. + * TIM_ExtTRGPSC_DIV2 - ETRP frequency divided by 2. + * TIM_ExtTRGPSC_DIV4 - ETRP frequency divided by 4. + * TIM_ExtTRGPSC_DIV8 - ETRP frequency divided by 8. + * TIM_ExtTRGPolarity - The external Trigger Polarity. + * TIM_ExtTRGPolarity_Inverted - active low or falling edge active. + * TIM_ExtTRGPolarity_NonInverted - active high or rising edge active. + * ExtTRGFilter - External Trigger Filter. + * This parameter must be a value between 0x0 and 0xF. + * + * @return none + */ +void TIM_ETRClockMode2Config(TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) +{ + TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); + TIMx->SMCFGR |= TIM_ECE; +} + +/********************************************************************* + * @fn TIM_ETRConfig + * + * @brief Configures the TIMx External Trigger (ETR). + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_ExtTRGPrescaler - The external Trigger Prescaler. + * TIM_ExtTRGPSC_OFF - ETRP Prescaler OFF. + * TIM_ExtTRGPSC_DIV2 - ETRP frequency divided by 2. + * TIM_ExtTRGPSC_DIV4 - ETRP frequency divided by 4. + * TIM_ExtTRGPSC_DIV8 - ETRP frequency divided by 8. + * TIM_ExtTRGPolarity - The external Trigger Polarity. + * TIM_ExtTRGPolarity_Inverted - active low or falling edge active. + * TIM_ExtTRGPolarity_NonInverted - active high or rising edge active. + * ExtTRGFilter - External Trigger Filter. + * This parameter must be a value between 0x0 and 0xF. + * + * @return none + */ +void TIM_ETRConfig(TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter) +{ + uint16_t tmpsmcr = 0; + + tmpsmcr = TIMx->SMCFGR; + tmpsmcr &= SMCFGR_ETR_Mask; + tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8))); + TIMx->SMCFGR = tmpsmcr; +} + +/********************************************************************* + * @fn TIM_PrescalerConfig + * + * @brief Configures the TIMx Prescaler. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * Prescaler - specifies the Prescaler Register value. + * TIM_PSCReloadMode - specifies the TIM Prescaler Reload mode. + * TIM_PSCReloadMode - specifies the TIM Prescaler Reload mode. + * TIM_PSCReloadMode_Update - The Prescaler is loaded at the update event. + * TIM_PSCReloadMode_Immediate - The Prescaler is loaded immediately. + * + * @return none + */ +void TIM_PrescalerConfig(TIM_TypeDef *TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode) +{ + TIMx->PSC = Prescaler; + TIMx->SWEVGR = TIM_PSCReloadMode; +} + +/********************************************************************* + * @fn TIM_CounterModeConfig + * + * @brief Specifies the TIMx Counter Mode to be used. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_CounterMode - specifies the Counter Mode to be used. + * TIM_CounterMode_Up - TIM Up Counting Mode. + * TIM_CounterMode_Down - TIM Down Counting Mode. + * TIM_CounterMode_CenterAligned1 - TIM Center Aligned Mode1. + * TIM_CounterMode_CenterAligned2 - TIM Center Aligned Mode2. + * TIM_CounterMode_CenterAligned3 - TIM Center Aligned Mode3. + * + * @return none + */ +void TIM_CounterModeConfig(TIM_TypeDef *TIMx, uint16_t TIM_CounterMode) +{ + uint16_t tmpcr1 = 0; + + tmpcr1 = TIMx->CTLR1; + tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_DIR | TIM_CMS))); + tmpcr1 |= TIM_CounterMode; + TIMx->CTLR1 = tmpcr1; +} + +/********************************************************************* + * @fn TIM_SelectInputTrigger + * + * @brief Selects the Input Trigger source. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_InputTriggerSource - The Input Trigger source. + * TIM_TS_ITR0 - Internal Trigger 0. + * TIM_TS_ITR1 - Internal Trigger 1. + * TIM_TS_ITR2 - Internal Trigger 2. + * TIM_TS_ITR3 - Internal Trigger 3. + * TIM_TS_TI1F_ED - TI1 Edge Detector. + * TIM_TS_TI1FP1 - Filtered Timer Input 1. + * TIM_TS_TI2FP2 - Filtered Timer Input 2. + * TIM_TS_ETRF - External Trigger input. + * + * @return none + */ +void TIM_SelectInputTrigger(TIM_TypeDef *TIMx, uint16_t TIM_InputTriggerSource) +{ + uint16_t tmpsmcr = 0; + + tmpsmcr = TIMx->SMCFGR; + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_TS)); + tmpsmcr |= TIM_InputTriggerSource; + TIMx->SMCFGR = tmpsmcr; +} + +/********************************************************************* + * @fn TIM_EncoderInterfaceConfig + * + * @brief Configures the TIMx Encoder Interface. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_EncoderMode - specifies the TIMx Encoder Mode. + * TIM_EncoderMode_TI1 - Counter counts on TI1FP1 edge depending + * on TI2FP2 level. + * TIM_EncoderMode_TI2 - Counter counts on TI2FP2 edge depending + * on TI1FP1 level. + * TIM_EncoderMode_TI12 - Counter counts on both TI1FP1 and + * TI2FP2 edges depending. + * TIM_IC1Polarity - specifies the IC1 Polarity. + * TIM_ICPolarity_Falling - IC Falling edge. + * TTIM_ICPolarity_Rising - IC Rising edge. + * TIM_IC2Polarity - specifies the IC2 Polarity. + * TIM_ICPolarity_Falling - IC Falling edge. + * TIM_ICPolarity_Rising - IC Rising edge. + * + * @return none + */ +void TIM_EncoderInterfaceConfig(TIM_TypeDef *TIMx, uint16_t TIM_EncoderMode, + uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity) +{ + uint16_t tmpsmcr = 0; + uint16_t tmpccmr1 = 0; + uint16_t tmpccer = 0; + + tmpsmcr = TIMx->SMCFGR; + tmpccmr1 = TIMx->CHCTLR1; + tmpccer = TIMx->CCER; + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMS)); + tmpsmcr |= TIM_EncoderMode; + tmpccmr1 &= (uint16_t)(((uint16_t) ~((uint16_t)TIM_CC1S)) & (uint16_t)(~((uint16_t)TIM_CC2S))); + tmpccmr1 |= TIM_CC1S_0 | TIM_CC2S_0; + tmpccer &= (uint16_t)(((uint16_t) ~((uint16_t)TIM_CC1P)) & ((uint16_t) ~((uint16_t)TIM_CC2P))); + tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4)); + TIMx->SMCFGR = tmpsmcr; + TIMx->CHCTLR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TIM_ForcedOC1Config + * + * @brief Forces the TIMx output 1 waveform to active or inactive level. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_ForcedAction - specifies the forced Action to be set to the + * output waveform. + * TIM_ForcedAction_Active - Force active level on OC1REF. + * TIM_ForcedAction_InActive - Force inactive level on OC1REF. + * + * @return none + */ +void TIM_ForcedOC1Config(TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr1 = 0; + + tmpccmr1 = TIMx->CHCTLR1; + tmpccmr1 &= (uint16_t) ~((uint16_t)TIM_OC1M); + tmpccmr1 |= TIM_ForcedAction; + TIMx->CHCTLR1 = tmpccmr1; +} + +/********************************************************************* + * @fn TIM_ForcedOC2Config + * + * @brief Forces the TIMx output 2 waveform to active or inactive level. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_ForcedAction - specifies the forced Action to be set to the + * output waveform. + * TIM_ForcedAction_Active - Force active level on OC2REF. + * TIM_ForcedAction_InActive - Force inactive level on OC2REF. + * + * @return none + */ +void TIM_ForcedOC2Config(TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr1 = 0; + + tmpccmr1 = TIMx->CHCTLR1; + tmpccmr1 &= (uint16_t) ~((uint16_t)TIM_OC2M); + tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8); + TIMx->CHCTLR1 = tmpccmr1; +} + +/********************************************************************* + * @fn TIM_ForcedOC3Config + * + * @brief Forces the TIMx output 3 waveform to active or inactive level. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_ForcedAction - specifies the forced Action to be set to the + * output waveform. + * TIM_ForcedAction_Active - Force active level on OC3REF. + * TIM_ForcedAction_InActive - Force inactive level on OC3REF. + * + * @return none + */ +void TIM_ForcedOC3Config(TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr2 = 0; + + tmpccmr2 = TIMx->CHCTLR2; + tmpccmr2 &= (uint16_t) ~((uint16_t)TIM_OC3M); + tmpccmr2 |= TIM_ForcedAction; + TIMx->CHCTLR2 = tmpccmr2; +} + +/********************************************************************* + * @fn TIM_ForcedOC4Config + * + * @brief Forces the TIMx output 4 waveform to active or inactive level. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_ForcedAction - specifies the forced Action to be set to the + * output waveform. + * TIM_ForcedAction_Active - Force active level on OC4REF. + * TIM_ForcedAction_InActive - Force inactive level on OC4REF. + * + * @return none + */ +void TIM_ForcedOC4Config(TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr2 = 0; + + tmpccmr2 = TIMx->CHCTLR2; + tmpccmr2 &= (uint16_t) ~((uint16_t)TIM_OC4M); + tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8); + TIMx->CHCTLR2 = tmpccmr2; +} + +/********************************************************************* + * @fn TIM_ARRPreloadConfig + * + * @brief Enables or disables TIMx peripheral Preload register on ARR. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void TIM_ARRPreloadConfig(TIM_TypeDef *TIMx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + TIMx->CTLR1 |= TIM_ARPE; + } + else + { + TIMx->CTLR1 &= (uint16_t) ~((uint16_t)TIM_ARPE); + } +} + +/********************************************************************* + * @fn TIM_SelectCOM + * + * @brief Selects the TIM peripheral Commutation event. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void TIM_SelectCOM(TIM_TypeDef *TIMx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + TIMx->CTLR2 |= TIM_CCUS; + } + else + { + TIMx->CTLR2 &= (uint16_t) ~((uint16_t)TIM_CCUS); + } +} + +/********************************************************************* + * @fn TIM_SelectCCDMA + * + * @brief Selects the TIMx peripheral Capture Compare DMA source. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void TIM_SelectCCDMA(TIM_TypeDef *TIMx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + TIMx->CTLR2 |= TIM_CCDS; + } + else + { + TIMx->CTLR2 &= (uint16_t) ~((uint16_t)TIM_CCDS); + } +} + +/********************************************************************* + * @fn TIM_CCPreloadControl + * + * @brief DSets or Resets the TIM peripheral Capture Compare Preload Control bit. + * reset values (Affects also the I2Ss). + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void TIM_CCPreloadControl(TIM_TypeDef *TIMx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + TIMx->CTLR2 |= TIM_CCPC; + } + else + { + TIMx->CTLR2 &= (uint16_t) ~((uint16_t)TIM_CCPC); + } +} + +/********************************************************************* + * @fn TIM_OC1PreloadConfig + * + * @brief Enables or disables the TIMx peripheral Preload register on CCR1. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCPreload - new state of the TIMx peripheral Preload register. + * TIM_OCPreload_Enable. + * TIM_OCPreload_Disable. + * + * @return none + */ +void TIM_OC1PreloadConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr1 = 0; + + tmpccmr1 = TIMx->CHCTLR1; + tmpccmr1 &= (uint16_t) ~((uint16_t)TIM_OC1PE); + tmpccmr1 |= TIM_OCPreload; + TIMx->CHCTLR1 = tmpccmr1; +} + +/********************************************************************* + * @fn TIM_OC2PreloadConfig + * + * @brief Enables or disables the TIMx peripheral Preload register on CCR2. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCPreload - new state of the TIMx peripheral Preload register. + * TIM_OCPreload_Enable. + * TIM_OCPreload_Disable. + * + * @return none + */ +void TIM_OC2PreloadConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr1 = 0; + + tmpccmr1 = TIMx->CHCTLR1; + tmpccmr1 &= (uint16_t) ~((uint16_t)TIM_OC2PE); + tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8); + TIMx->CHCTLR1 = tmpccmr1; +} + +/********************************************************************* + * @fn TIM_OC3PreloadConfig + * + * @brief Enables or disables the TIMx peripheral Preload register on CCR3. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCPreload - new state of the TIMx peripheral Preload register. + * TIM_OCPreload_Enable. + * TIM_OCPreload_Disable. + * + * @return none + */ +void TIM_OC3PreloadConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr2 = 0; + + tmpccmr2 = TIMx->CHCTLR2; + tmpccmr2 &= (uint16_t) ~((uint16_t)TIM_OC3PE); + tmpccmr2 |= TIM_OCPreload; + TIMx->CHCTLR2 = tmpccmr2; +} + +/********************************************************************* + * @fn TIM_OC4PreloadConfig + * + * @brief Enables or disables the TIMx peripheral Preload register on CCR4. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCPreload - new state of the TIMx peripheral Preload register. + * TIM_OCPreload_Enable. + * TIM_OCPreload_Disable. + * + * @return none + */ +void TIM_OC4PreloadConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr2 = 0; + + tmpccmr2 = TIMx->CHCTLR2; + tmpccmr2 &= (uint16_t) ~((uint16_t)TIM_OC4PE); + tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8); + TIMx->CHCTLR2 = tmpccmr2; +} + +/********************************************************************* + * @fn TIM_OC1FastConfig + * + * @brief Configures the TIMx Output Compare 1 Fast feature. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCFast - new state of the Output Compare Fast Enable Bit. + * TIM_OCFast_Enable - TIM output compare fast enable. + * TIM_OCFast_Disable - TIM output compare fast disable. + * + * @return none + */ +void TIM_OC1FastConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr1 = 0; + + tmpccmr1 = TIMx->CHCTLR1; + tmpccmr1 &= (uint16_t) ~((uint16_t)TIM_OC1FE); + tmpccmr1 |= TIM_OCFast; + TIMx->CHCTLR1 = tmpccmr1; +} + +/********************************************************************* + * @fn TIM_OC2FastConfig + * + * @brief Configures the TIMx Output Compare 2 Fast feature. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCFast - new state of the Output Compare Fast Enable Bit. + * TIM_OCFast_Enable - TIM output compare fast enable. + * TIM_OCFast_Disable - TIM output compare fast disable. + * + * @return none + */ +void TIM_OC2FastConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr1 = 0; + + tmpccmr1 = TIMx->CHCTLR1; + tmpccmr1 &= (uint16_t) ~((uint16_t)TIM_OC2FE); + tmpccmr1 |= (uint16_t)(TIM_OCFast << 8); + TIMx->CHCTLR1 = tmpccmr1; +} + +/********************************************************************* + * @fn TIM_OC3FastConfig + * + * @brief Configures the TIMx Output Compare 3 Fast feature. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCFast - new state of the Output Compare Fast Enable Bit. + * TIM_OCFast_Enable - TIM output compare fast enable. + * TIM_OCFast_Disable - TIM output compare fast disable. + * + * @return none + */ +void TIM_OC3FastConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr2 = 0; + + tmpccmr2 = TIMx->CHCTLR2; + tmpccmr2 &= (uint16_t) ~((uint16_t)TIM_OC3FE); + tmpccmr2 |= TIM_OCFast; + TIMx->CHCTLR2 = tmpccmr2; +} + +/********************************************************************* + * @fn TIM_OC4FastConfig + * + * @brief Configures the TIMx Output Compare 4 Fast feature. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCFast - new state of the Output Compare Fast Enable Bit. + * TIM_OCFast_Enable - TIM output compare fast enable. + * TIM_OCFast_Disable - TIM output compare fast disable. + * + * @return none + */ +void TIM_OC4FastConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr2 = 0; + + tmpccmr2 = TIMx->CHCTLR2; + tmpccmr2 &= (uint16_t) ~((uint16_t)TIM_OC4FE); + tmpccmr2 |= (uint16_t)(TIM_OCFast << 8); + TIMx->CHCTLR2 = tmpccmr2; +} + +/********************************************************************* + * @fn TIM_ClearOC1Ref + * + * @brief Clears or safeguards the OCREF1 signal on an external event. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCClear - new state of the Output Compare Clear Enable Bit. + * TIM_OCClear_Enable - TIM Output clear enable. + * TIM_OCClear_Disable - TIM Output clear disable. + * + * @return none + */ +void TIM_ClearOC1Ref(TIM_TypeDef *TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr1 = 0; + + tmpccmr1 = TIMx->CHCTLR1; + tmpccmr1 &= (uint16_t) ~((uint16_t)TIM_OC1CE); + tmpccmr1 |= TIM_OCClear; + TIMx->CHCTLR1 = tmpccmr1; +} + +/********************************************************************* + * @fn TIM_ClearOC2Ref + * + * @brief Clears or safeguards the OCREF2 signal on an external event. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCClear - new state of the Output Compare Clear Enable Bit. + * TIM_OCClear_Enable - TIM Output clear enable. + * TIM_OCClear_Disable - TIM Output clear disable. + * + * @return none + */ +void TIM_ClearOC2Ref(TIM_TypeDef *TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr1 = 0; + + tmpccmr1 = TIMx->CHCTLR1; + tmpccmr1 &= (uint16_t) ~((uint16_t)TIM_OC2CE); + tmpccmr1 |= (uint16_t)(TIM_OCClear << 8); + TIMx->CHCTLR1 = tmpccmr1; +} + +/********************************************************************* + * @fn TIM_ClearOC3Ref + * + * @brief Clears or safeguards the OCREF3 signal on an external event. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCClear - new state of the Output Compare Clear Enable Bit. + * TIM_OCClear_Enable - TIM Output clear enable. + * TIM_OCClear_Disable - TIM Output clear disable. + * + * @return none + */ +void TIM_ClearOC3Ref(TIM_TypeDef *TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr2 = 0; + + tmpccmr2 = TIMx->CHCTLR2; + tmpccmr2 &= (uint16_t) ~((uint16_t)TIM_OC3CE); + tmpccmr2 |= TIM_OCClear; + TIMx->CHCTLR2 = tmpccmr2; +} + +/********************************************************************* + * @fn TIM_ClearOC4Ref + * + * @brief Clears or safeguards the OCREF4 signal on an external event. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCClear - new state of the Output Compare Clear Enable Bit. + * TIM_OCClear_Enable - TIM Output clear enable. + * TIM_OCClear_Disable - TIM Output clear disable. + * + * @return none + */ +void TIM_ClearOC4Ref(TIM_TypeDef *TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr2 = 0; + + tmpccmr2 = TIMx->CHCTLR2; + tmpccmr2 &= (uint16_t) ~((uint16_t)TIM_OC4CE); + tmpccmr2 |= (uint16_t)(TIM_OCClear << 8); + TIMx->CHCTLR2 = tmpccmr2; +} + +/********************************************************************* + * @fn TIM_OC1PolarityConfig + * + * @brief Configures the TIMx channel 1 polarity. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCPolarity - specifies the OC1 Polarity. + * TIM_OCPolarity_High - Output Compare active high. + * TIM_OCPolarity_Low - Output Compare active low. + * + * @return none + */ +void TIM_OC1PolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + + tmpccer = TIMx->CCER; + tmpccer &= (uint16_t) ~((uint16_t)TIM_CC1P); + tmpccer |= TIM_OCPolarity; + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TIM_OC1NPolarityConfig + * + * @brief Configures the TIMx channel 1 polarity. + * + * @param TIMx - where x can be 1 to select the TIM peripheral. + * TIM_OCNPolarity - specifies the OC1N Polarity. + * TIM_OCNPolarity_High - Output Compare active high. + * TIM_OCNPolarity_Low - Output Compare active low. + * + * @return none + */ +void TIM_OC1NPolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + + tmpccer = TIMx->CCER; + tmpccer &= (uint16_t) ~((uint16_t)TIM_CC1NP); + tmpccer |= TIM_OCNPolarity; + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TIM_OC2PolarityConfig + * + * @brief Configures the TIMx channel 2 polarity. + * + * @param TIMx - where x can be 1 to 4 to select the TIM peripheral. + * TIM_OCPolarity - specifies the OC2 Polarity. + * TIM_OCPolarity_High - Output Compare active high. + * TIM_OCPolarity_Low - Output Compare active low. + * + * @return none + */ +void TIM_OC2PolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + + tmpccer = TIMx->CCER; + tmpccer &= (uint16_t) ~((uint16_t)TIM_CC2P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 4); + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TIM_OC2NPolarityConfig + * + * @brief Configures the TIMx channel 2 polarity. + * + * @param TIMx - where x can be 1 to select the TIM peripheral. + * TIM_OCNPolarity - specifies the OC1N Polarity. + * TIM_OCNPolarity_High - Output Compare active high. + * TIM_OCNPolarity_Low - Output Compare active low. + * + * @return none + */ +void TIM_OC2NPolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + + tmpccer = TIMx->CCER; + tmpccer &= (uint16_t) ~((uint16_t)TIM_CC2NP); + tmpccer |= (uint16_t)(TIM_OCNPolarity << 4); + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TIM_OC3PolarityConfig + * + * @brief Configures the TIMx Channel 3 polarity. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_OCPolarit - specifies the OC3 Polarity. + * TIM_OCPolarity_High - Output Compare active high. + * TIM_OCPolarity_Low - Output Compare active low. + * + * @return none + */ +void TIM_OC3PolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + + tmpccer = TIMx->CCER; + tmpccer &= (uint16_t) ~((uint16_t)TIM_CC3P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 8); + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TIM_OC3NPolarityConfig + * + * @brief Configures the TIMx Channel 3N polarity. + * + * @param TIMx - where x can be 1 to select the TIM peripheral. + * TIM_OCNPolarity - specifies the OC2N Polarity. + * TIM_OCNPolarity_High - Output Compare active high. + * TIM_OCNPolarity_Low - Output Compare active low. + * + * @return none + */ +void TIM_OC3NPolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + + tmpccer = TIMx->CCER; + tmpccer &= (uint16_t) ~((uint16_t)TIM_CC3NP); + tmpccer |= (uint16_t)(TIM_OCNPolarity << 8); + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TIM_OC4PolarityConfig + * + * @brief Configures the TIMx Channel 4 polarity. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_OCPolarit - specifies the OC3 Polarity. + * TIM_OCPolarity_High - Output Compare active high. + * TIM_OCPolarity_Low - Output Compare active low. + * + * @return none + */ +void TIM_OC4PolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + + tmpccer = TIMx->CCER; + tmpccer &= (uint16_t) ~((uint16_t)TIM_CC4P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 12); + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TIM_CCxCmd + * + * @brief Enables or disables the TIM Capture Compare Channel x. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_Channel - specifies the TIM Channel. + * TIM_Channel_1 - TIM Channel 1. + * TIM_Channel_2 - TIM Channel 2. + * TIM_Channel_3 - TIM Channel 3. + * TIM_Channel_4 - TIM Channel 4. + * TIM_CCx - specifies the TIM Channel CCxE bit new state. + * TIM_CCx_Enable. + * TIM_CCx_Disable. + * + * @return none + */ +void TIM_CCxCmd(TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx) +{ + uint16_t tmp = 0; + + tmp = CCER_CCE_Set << TIM_Channel; + TIMx->CCER &= (uint16_t)~tmp; + TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel); +} + +/********************************************************************* + * @fn TIM_CCxNCmd + * + * @brief Enables or disables the TIM Capture Compare Channel xN. + * + * @param TIMx - where x can be 1 select the TIM peripheral. + * TIM_Channel - specifies the TIM Channel. + * TIM_Channel_1 - TIM Channel 1. + * TIM_Channel_2 - TIM Channel 2. + * TIM_Channel_3 - TIM Channel 3. + * TIM_CCxN - specifies the TIM Channel CCxNE bit new state. + * TIM_CCxN_Enable. + * TIM_CCxN_Disable. + * + * @return none + */ +void TIM_CCxNCmd(TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN) +{ + uint16_t tmp = 0; + + tmp = CCER_CCNE_Set << TIM_Channel; + TIMx->CCER &= (uint16_t)~tmp; + TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel); +} + +/********************************************************************* + * @fn TIM_SelectOCxM + * + * @brief Selects the TIM Output Compare Mode. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_Channel - specifies the TIM Channel. + * TIM_Channel_1 - TIM Channel 1. + * TIM_Channel_2 - TIM Channel 2. + * TIM_Channel_3 - TIM Channel 3. + * TIM_Channel_4 - TIM Channel 4. + * TIM_OCMode - specifies the TIM Output Compare Mode. + * TIM_OCMode_Timing. + * TIM_OCMode_Active. + * TIM_OCMode_Toggle. + * TIM_OCMode_PWM1. + * TIM_OCMode_PWM2. + * TIM_ForcedAction_Active. + * TIM_ForcedAction_InActive. + * + * @return none + */ +void TIM_SelectOCxM(TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode) +{ + uint32_t tmp = 0; + uint16_t tmp1 = 0; + + tmp = (uint32_t)TIMx; + tmp += CHCTLR_Offset; + tmp1 = CCER_CCE_Set << (uint16_t)TIM_Channel; + TIMx->CCER &= (uint16_t)~tmp1; + + if((TIM_Channel == TIM_Channel_1) || (TIM_Channel == TIM_Channel_3)) + { + tmp += (TIM_Channel >> 1); + *(__IO uint32_t *)tmp &= (uint32_t) ~((uint32_t)TIM_OC1M); + *(__IO uint32_t *)tmp |= TIM_OCMode; + } + else + { + tmp += (uint16_t)(TIM_Channel - (uint16_t)4) >> (uint16_t)1; + *(__IO uint32_t *)tmp &= (uint32_t) ~((uint32_t)TIM_OC2M); + *(__IO uint32_t *)tmp |= (uint16_t)(TIM_OCMode << 8); + } +} + +/********************************************************************* + * @fn TIM_UpdateDisableConfig + * + * @brief Enables or Disables the TIMx Update event. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void TIM_UpdateDisableConfig(TIM_TypeDef *TIMx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + TIMx->CTLR1 |= TIM_UDIS; + } + else + { + TIMx->CTLR1 &= (uint16_t) ~((uint16_t)TIM_UDIS); + } +} + +/********************************************************************* + * @fn TIM_UpdateRequestConfig + * + * @brief Configures the TIMx Update Request Interrupt source. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_UpdateSource - specifies the Update source. + * TIM_UpdateSource_Regular. + * TIM_UpdateSource_Global. + * + * @return none + */ +void TIM_UpdateRequestConfig(TIM_TypeDef *TIMx, uint16_t TIM_UpdateSource) +{ + if(TIM_UpdateSource != TIM_UpdateSource_Global) + { + TIMx->CTLR1 |= TIM_URS; + } + else + { + TIMx->CTLR1 &= (uint16_t) ~((uint16_t)TIM_URS); + } +} + +/********************************************************************* + * @fn TIM_SelectHallSensor + * + * @brief Enables or disables the TIMx's Hall sensor interface. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void TIM_SelectHallSensor(TIM_TypeDef *TIMx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + TIMx->CTLR2 |= TIM_TI1S; + } + else + { + TIMx->CTLR2 &= (uint16_t) ~((uint16_t)TIM_TI1S); + } +} + +/********************************************************************* + * @fn TIM_SelectOnePulseMode + * + * @brief Selects the TIMx's One Pulse Mode. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_OPMode - specifies the OPM Mode to be used. + * TIM_OPMode_Single. + * TIM_OPMode_Repetitive. + * + * @return none + */ +void TIM_SelectOnePulseMode(TIM_TypeDef *TIMx, uint16_t TIM_OPMode) +{ + TIMx->CTLR1 &= (uint16_t) ~((uint16_t)TIM_OPM); + TIMx->CTLR1 |= TIM_OPMode; +} + +/********************************************************************* + * @fn TIM_SelectOutputTrigger + * + * @brief Selects the TIMx Trigger Output Mode. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_TRGOSource - specifies the Trigger Output source. + * TIM_TRGOSource_Reset - The UG bit in the TIM_EGR register is + * used as the trigger output (TRGO). + * TIM_TRGOSource_Enable - The Counter Enable CEN is used as the + * trigger output (TRGO). + * TIM_TRGOSource_Update - The update event is selected as the + * trigger output (TRGO). + * TIM_TRGOSource_OC1 - The trigger output sends a positive pulse + * when the CC1IF flag is to be set, as soon as a capture or compare match occurs (TRGO). + * TIM_TRGOSource_OC1Ref - OC1REF signal is used as the trigger output (TRGO). + * TIM_TRGOSource_OC2Ref - OC2REF signal is used as the trigger output (TRGO). + * TIM_TRGOSource_OC3Ref - OC3REF signal is used as the trigger output (TRGO). + * TIM_TRGOSource_OC4Ref - OC4REF signal is used as the trigger output (TRGO). + * + * @return none + */ +void TIM_SelectOutputTrigger(TIM_TypeDef *TIMx, uint16_t TIM_TRGOSource) +{ + TIMx->CTLR2 &= (uint16_t) ~((uint16_t)TIM_MMS); + TIMx->CTLR2 |= TIM_TRGOSource; +} + +/********************************************************************* + * @fn TIM_SelectSlaveMode + * + * @brief Selects the TIMx Slave Mode. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_SlaveMode - specifies the Timer Slave Mode. + * TIM_SlaveMode_Reset - Rising edge of the selected trigger + * signal (TRGI) re-initializes. + * TIM_SlaveMode_Gated - The counter clock is enabled when the + * trigger signal (TRGI) is high. + * TIM_SlaveMode_Trigger - The counter starts at a rising edge + * of the trigger TRGI. + * TIM_SlaveMode_External1 - Rising edges of the selected trigger + * (TRGI) clock the counter. + * + * @return none + */ +void TIM_SelectSlaveMode(TIM_TypeDef *TIMx, uint16_t TIM_SlaveMode) +{ + TIMx->SMCFGR &= (uint16_t) ~((uint16_t)TIM_SMS); + TIMx->SMCFGR |= TIM_SlaveMode; +} + +/********************************************************************* + * @fn TIM_SelectMasterSlaveMode + * + * @brief Sets or Resets the TIMx Master/Slave Mode. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_MasterSlaveMode - specifies the Timer Master Slave Mode. + * TIM_MasterSlaveMode_Enable - synchronization between the current + * timer and its slaves (through TRGO). + * TIM_MasterSlaveMode_Disable - No action. + * + * @return none + */ +void TIM_SelectMasterSlaveMode(TIM_TypeDef *TIMx, uint16_t TIM_MasterSlaveMode) +{ + TIMx->SMCFGR &= (uint16_t) ~((uint16_t)TIM_MSM); + TIMx->SMCFGR |= TIM_MasterSlaveMode; +} + +/********************************************************************* + * @fn TIM_SetCounter + * + * @brief Sets the TIMx Counter Register value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * Counter - specifies the Counter register new value. + * + * @return none + */ +void TIM_SetCounter(TIM_TypeDef *TIMx, uint16_t Counter) +{ + TIMx->CNT = Counter; +} + +/********************************************************************* + * @fn TIM_SetAutoreload + * + * @brief Sets the TIMx Autoreload Register value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * Autoreload - specifies the Autoreload register new value. + * + * @return none + */ +void TIM_SetAutoreload(TIM_TypeDef *TIMx, uint16_t Autoreload) +{ + TIMx->ATRLR = Autoreload; +} + +/********************************************************************* + * @fn TIM_SetCompare1 + * + * @brief Sets the TIMx Capture Compare1 Register value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * Compare1 - specifies the Capture Compare1 register new value. + * + * @return none + */ +void TIM_SetCompare1(TIM_TypeDef *TIMx, uint16_t Compare1) +{ + TIMx->CH1CVR = Compare1; +} + +/********************************************************************* + * @fn TIM_SetCompare2 + * + * @brief Sets the TIMx Capture Compare2 Register value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * Compare1 - specifies the Capture Compare1 register new value. + * + * @return none + */ +void TIM_SetCompare2(TIM_TypeDef *TIMx, uint16_t Compare2) +{ + TIMx->CH2CVR = Compare2; +} + +/********************************************************************* + * @fn TIM_SetCompare3 + * + * @brief Sets the TIMx Capture Compare3 Register value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * Compare1 - specifies the Capture Compare1 register new value. + * + * @return none + */ +void TIM_SetCompare3(TIM_TypeDef *TIMx, uint16_t Compare3) +{ + TIMx->CH3CVR = Compare3; +} + +/********************************************************************* + * @fn TIM_SetCompare4 + * + * @brief Sets the TIMx Capture Compare4 Register value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * Compare1 - specifies the Capture Compare1 register new value. + * + * @return none + */ +void TIM_SetCompare4(TIM_TypeDef *TIMx, uint16_t Compare4) +{ + TIMx->CH4CVR = Compare4; +} + +/********************************************************************* + * @fn TIM_SetIC1Prescaler + * + * @brief Sets the TIMx Input Capture 1 prescaler. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_ICPSC - specifies the Input Capture1 prescaler new value. + * TIM_ICPSC_DIV1 - no prescaler. + * TIM_ICPSC_DIV2 - capture is done once every 2 events. + * TIM_ICPSC_DIV4 - capture is done once every 4 events. + * TIM_ICPSC_DIV8 - capture is done once every 8 events. + * + * @return none + */ +void TIM_SetIC1Prescaler(TIM_TypeDef *TIMx, uint16_t TIM_ICPSC) +{ + TIMx->CHCTLR1 &= (uint16_t) ~((uint16_t)TIM_IC1PSC); + TIMx->CHCTLR1 |= TIM_ICPSC; +} + +/********************************************************************* + * @fn TIM_SetIC2Prescaler + * + * @brief Sets the TIMx Input Capture 2 prescaler. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_ICPSC - specifies the Input Capture1 prescaler new value. + * TIM_ICPSC_DIV1 - no prescaler. + * TIM_ICPSC_DIV2 - capture is done once every 2 events. + * TIM_ICPSC_DIV4 - capture is done once every 4 events. + * TIM_ICPSC_DIV8 - capture is done once every 8 events. + * + * @return none + */ +void TIM_SetIC2Prescaler(TIM_TypeDef *TIMx, uint16_t TIM_ICPSC) +{ + TIMx->CHCTLR1 &= (uint16_t) ~((uint16_t)TIM_IC2PSC); + TIMx->CHCTLR1 |= (uint16_t)(TIM_ICPSC << 8); +} + +/********************************************************************* + * @fn TIM_SetIC3Prescaler + * + * @brief Sets the TIMx Input Capture 3 prescaler. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_ICPSC - specifies the Input Capture1 prescaler new value. + * TIM_ICPSC_DIV1 - no prescaler. + * TIM_ICPSC_DIV2 - capture is done once every 2 events. + * TIM_ICPSC_DIV4 - capture is done once every 4 events. + * TIM_ICPSC_DIV8 - capture is done once every 8 events. + * + * @return none + */ +void TIM_SetIC3Prescaler(TIM_TypeDef *TIMx, uint16_t TIM_ICPSC) +{ + TIMx->CHCTLR2 &= (uint16_t) ~((uint16_t)TIM_IC3PSC); + TIMx->CHCTLR2 |= TIM_ICPSC; +} + +/********************************************************************* + * @fn TIM_SetIC4Prescaler + * + * @brief Sets the TIMx Input Capture 4 prescaler. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_ICPSC - specifies the Input Capture1 prescaler new value. + * TIM_ICPSC_DIV1 - no prescaler. + * TIM_ICPSC_DIV2 - capture is done once every 2 events. + * TIM_ICPSC_DIV4 - capture is done once every 4 events. + * TIM_ICPSC_DIV8 - capture is done once every 8 events. + * + * @return none + */ +void TIM_SetIC4Prescaler(TIM_TypeDef *TIMx, uint16_t TIM_ICPSC) +{ + TIMx->CHCTLR2 &= (uint16_t) ~((uint16_t)TIM_IC4PSC); + TIMx->CHCTLR2 |= (uint16_t)(TIM_ICPSC << 8); +} + +/********************************************************************* + * @fn TIM_SetClockDivision + * + * @brief Sets the TIMx Clock Division value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_CKD - specifies the clock division value. + * TIM_CKD_DIV1 - TDTS = Tck_tim. + * TIM_CKD_DIV2 - TDTS = 2*Tck_tim. + * TIM_CKD_DIV4 - TDTS = 4*Tck_tim. + * + * @return none + */ +void TIM_SetClockDivision(TIM_TypeDef *TIMx, uint16_t TIM_CKD) +{ + TIMx->CTLR1 &= (uint16_t) ~((uint16_t)TIM_CTLR1_CKD); + TIMx->CTLR1 |= TIM_CKD; +} + +/********************************************************************* + * @fn TIM_GetCapture1 + * + * @brief Gets the TIMx Input Capture 1 value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * + * @return TIMx->CH1CVR - Capture Compare 1 Register value. + */ +uint16_t TIM_GetCapture1(TIM_TypeDef *TIMx) +{ + return TIMx->CH1CVR; +} + +/********************************************************************* + * @fn TIM_GetCapture2 + * + * @brief Gets the TIMx Input Capture 2 value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * + * @return TIMx->CH2CVR - Capture Compare 2 Register value. + */ +uint16_t TIM_GetCapture2(TIM_TypeDef *TIMx) +{ + return TIMx->CH2CVR; +} + +/********************************************************************* + * @fn TIM_GetCapture3 + * + * @brief Gets the TIMx Input Capture 3 value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * + * @return TIMx->CH3CVR - Capture Compare 3 Register value. + */ +uint16_t TIM_GetCapture3(TIM_TypeDef *TIMx) +{ + return TIMx->CH3CVR; +} + +/********************************************************************* + * @fn TIM_GetCapture4 + * + * @brief Gets the TIMx Input Capture 4 value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * + * @return TIMx->CH4CVR - Capture Compare 4 Register value. + */ +uint16_t TIM_GetCapture4(TIM_TypeDef *TIMx) +{ + return TIMx->CH4CVR; +} + +/********************************************************************* + * @fn TIM_GetCounter + * + * @brief Gets the TIMx Counter value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * + * @return TIMx->CNT - Counter Register value. + */ +uint16_t TIM_GetCounter(TIM_TypeDef *TIMx) +{ + return TIMx->CNT; +} + +/********************************************************************* + * @fn TIM_GetPrescaler + * + * @brief Gets the TIMx Prescaler value. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * + * @return TIMx->PSC - Prescaler Register value. + */ +uint16_t TIM_GetPrescaler(TIM_TypeDef *TIMx) +{ + return TIMx->PSC; +} + +/********************************************************************* + * @fn TIM_GetFlagStatus + * + * @brief Checks whether the specified TIM flag is set or not. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_FLAG - specifies the flag to check. + * TIM_FLAG_Update - TIM update Flag. + * TIM_FLAG_CC1 - TIM Capture Compare 1 Flag. + * TIM_FLAG_CC2 - TIM Capture Compare 2 Flag. + * TIM_FLAG_CC3 - TIM Capture Compare 3 Flag. + * TIM_FLAG_CC4 - TIM Capture Compare 4 Flag. + * TIM_FLAG_COM - TIM Commutation Flag. + * TIM_FLAG_Trigger - TIM Trigger Flag. + * TIM_FLAG_Break - TIM Break Flag. + * TIM_FLAG_CC1OF - TIM Capture Compare 1 overcapture Flag. + * TIM_FLAG_CC2OF - TIM Capture Compare 2 overcapture Flag. + * TIM_FLAG_CC3OF - TIM Capture Compare 3 overcapture Flag. + * TIM_FLAG_CC4OF - TIM Capture Compare 4 overcapture Flag. + * + * @return none + */ +FlagStatus TIM_GetFlagStatus(TIM_TypeDef *TIMx, uint16_t TIM_FLAG) +{ + ITStatus bitstatus = RESET; + + if((TIMx->INTFR & TIM_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn TIM_ClearFlag + * + * @brief Clears the TIMx's pending flags. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_FLAG - specifies the flag to check. + * TIM_FLAG_Update - TIM update Flag. + * TIM_FLAG_CC1 - TIM Capture Compare 1 Flag. + * TIM_FLAG_CC2 - TIM Capture Compare 2 Flag. + * TIM_FLAG_CC3 - TIM Capture Compare 3 Flag. + * TIM_FLAG_CC4 - TIM Capture Compare 4 Flag. + * TIM_FLAG_COM - TIM Commutation Flag. + * TIM_FLAG_Trigger - TIM Trigger Flag. + * TIM_FLAG_Break - TIM Break Flag. + * TIM_FLAG_CC1OF - TIM Capture Compare 1 overcapture Flag. + * TIM_FLAG_CC2OF - TIM Capture Compare 2 overcapture Flag. + * TIM_FLAG_CC3OF - TIM Capture Compare 3 overcapture Flag. + * TIM_FLAG_CC4OF - TIM Capture Compare 4 overcapture Flag. + * + * @return none + */ +void TIM_ClearFlag(TIM_TypeDef *TIMx, uint16_t TIM_FLAG) +{ + TIMx->INTFR = (uint16_t)~TIM_FLAG; +} + +/********************************************************************* + * @fn TIM_GetITStatus + * + * @brief Checks whether the TIM interrupt has occurred or not. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_IT - specifies the TIM interrupt source to check. + * TIM_IT_Update - TIM update Interrupt source. + * TIM_IT_CC1 - TIM Capture Compare 1 Interrupt source. + * TIM_IT_CC2 - TIM Capture Compare 2 Interrupt source. + * TIM_IT_CC3 - TIM Capture Compare 3 Interrupt source. + * TIM_IT_CC4 - TIM Capture Compare 4 Interrupt source. + * TIM_IT_COM - TIM Commutation Interrupt source. + * TIM_IT_Trigger - TIM Trigger Interrupt source. + * TIM_IT_Break - TIM Break Interrupt source. + * + * @return none + */ +ITStatus TIM_GetITStatus(TIM_TypeDef *TIMx, uint16_t TIM_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itstatus = 0x0, itenable = 0x0; + + itstatus = TIMx->INTFR & TIM_IT; + + itenable = TIMx->DMAINTENR & TIM_IT; + if((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn TIM_ClearITPendingBit + * + * @brief Clears the TIMx's interrupt pending bits. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * TIM_IT - specifies the TIM interrupt source to check. + * TIM_IT_Update - TIM update Interrupt source. + * TIM_IT_CC1 - TIM Capture Compare 1 Interrupt source. + * TIM_IT_CC2 - TIM Capture Compare 2 Interrupt source. + * TIM_IT_CC3 - TIM Capture Compare 3 Interrupt source. + * TIM_IT_CC4 - TIM Capture Compare 4 Interrupt source. + * TIM_IT_COM - TIM Commutation Interrupt source. + * TIM_IT_Trigger - TIM Trigger Interrupt source. + * TIM_IT_Break - TIM Break Interrupt source. + * + * @return none + */ +void TIM_ClearITPendingBit(TIM_TypeDef *TIMx, uint16_t TIM_IT) +{ + TIMx->INTFR = (uint16_t)~TIM_IT; +} + +/********************************************************************* + * @fn TI1_Config + * + * @brief Configure the TI1 as Input. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * IM_ICPolarity - The Input Polarity. + * TIM_ICPolarity_Rising. + * TIM_ICPolarity_Falling. + * TIM_ICSelection - specifies the input to be used. + * TIM_ICSelection_DirectTI - TIM Input 1 is selected to be + * connected to IC1. + * TIM_ICSelection_IndirectTI - TIM Input 1 is selected to be + * connected to IC2. + * TIM_ICSelection_TRC - TIM Input 1 is selected to be connected + * to TRC. + * TIM_ICFilter - Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * + * @return none + */ +static void TI1_Config(TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr1 = 0, tmpccer = 0; + + TIMx->CCER &= (uint16_t) ~((uint16_t)TIM_CC1E); + tmpccmr1 = TIMx->CHCTLR1; + tmpccer = TIMx->CCER; + tmpccmr1 &= (uint16_t)(((uint16_t) ~((uint16_t)TIM_CC1S)) & ((uint16_t) ~((uint16_t)TIM_IC1F))); + tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); + + if((TIMx == TIM1) || (TIMx == TIM2) || (TIMx == TIM3) || (TIMx == TIM4) || (TIMx == TIM5)) + { + tmpccer &= (uint16_t) ~((uint16_t)(TIM_CC1P)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CC1E); + } + else + { + tmpccer &= (uint16_t) ~((uint16_t)(TIM_CC1P | TIM_CC1NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CC1E); + } + + TIMx->CHCTLR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TI2_Config + * + * @brief Configure the TI2 as Input. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * IM_ICPolarity - The Input Polarity. + * TIM_ICPolarity_Rising. + * TIM_ICPolarity_Falling. + * TIM_ICSelection - specifies the input to be used. + * TIM_ICSelection_DirectTI - TIM Input 1 is selected to be + * connected to IC1. + * TIM_ICSelection_IndirectTI - TIM Input 1 is selected to be + * connected to IC2. + * TIM_ICSelection_TRC - TIM Input 1 is selected to be connected + * to TRC. + * TIM_ICFilter - Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * + * @return none + */ +static void TI2_Config(TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0; + + TIMx->CCER &= (uint16_t) ~((uint16_t)TIM_CC2E); + tmpccmr1 = TIMx->CHCTLR1; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 4); + tmpccmr1 &= (uint16_t)(((uint16_t) ~((uint16_t)TIM_CC2S)) & ((uint16_t) ~((uint16_t)TIM_IC2F))); + tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12); + tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8); + + if((TIMx == TIM1) || (TIMx == TIM2) || (TIMx == TIM3) || (TIMx == TIM4) || (TIMx == TIM5)) + { + tmpccer &= (uint16_t) ~((uint16_t)(TIM_CC2P)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CC2E); + } + else + { + tmpccer &= (uint16_t) ~((uint16_t)(TIM_CC2P | TIM_CC2NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CC2E); + } + + TIMx->CHCTLR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TI3_Config + * + * @brief Configure the TI3 as Input. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * IM_ICPolarity - The Input Polarity. + * TIM_ICPolarity_Rising. + * TIM_ICPolarity_Falling. + * TIM_ICSelection - specifies the input to be used. + * TIM_ICSelection_DirectTI - TIM Input 1 is selected to be + * connected to IC1. + * TIM_ICSelection_IndirectTI - TIM Input 1 is selected to be + * connected to IC2. + * TIM_ICSelection_TRC - TIM Input 1 is selected to be connected + * to TRC. + * TIM_ICFilter - Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * + * @return none + */ +static void TI3_Config(TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; + + TIMx->CCER &= (uint16_t) ~((uint16_t)TIM_CC3E); + tmpccmr2 = TIMx->CHCTLR2; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 8); + tmpccmr2 &= (uint16_t)(((uint16_t) ~((uint16_t)TIM_CC3S)) & ((uint16_t) ~((uint16_t)TIM_IC3F))); + tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); + + if((TIMx == TIM1) || (TIMx == TIM2) || (TIMx == TIM3) || (TIMx == TIM4) || (TIMx == TIM5)) + { + tmpccer &= (uint16_t) ~((uint16_t)(TIM_CC3P)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CC3E); + } + else + { + tmpccer &= (uint16_t) ~((uint16_t)(TIM_CC3P | TIM_CC3NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CC3E); + } + + TIMx->CHCTLR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/********************************************************************* + * @fn TI4_Config + * + * @brief Configure the TI4 as Input. + * + * @param TIMx - where x can be 1 to 4 select the TIM peripheral. + * IM_ICPolarity - The Input Polarity. + * TIM_ICPolarity_Rising. + * TIM_ICPolarity_Falling. + * TIM_ICSelection - specifies the input to be used. + * TIM_ICSelection_DirectTI - TIM Input 1 is selected to be + * connected to IC1. + * TIM_ICSelection_IndirectTI - TIM Input 1 is selected to be + * connected to IC2. + * TIM_ICSelection_TRC - TIM Input 1 is selected to be connected + * to TRC. + * TIM_ICFilter - Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * + * @return none + */ +static void TI4_Config(TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; + + TIMx->CCER &= (uint16_t) ~((uint16_t)TIM_CC4E); + tmpccmr2 = TIMx->CHCTLR2; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 12); + tmpccmr2 &= (uint16_t)((uint16_t)(~(uint16_t)TIM_CC4S) & ((uint16_t) ~((uint16_t)TIM_IC4F))); + tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8); + tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12); + + if((TIMx == TIM1) || (TIMx == TIM2) || (TIMx == TIM3) || (TIMx == TIM4) || (TIMx == TIM5)) + { + tmpccer &= (uint16_t) ~((uint16_t)(TIM_CC4P)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CC4E); + } + else + { + tmpccer &= (uint16_t) ~((uint16_t)(TIM_CC3P )); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CC4E); + } + + TIMx->CHCTLR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} diff --git a/gat_stand_fw/periph/src/ch32v20x_usart.c b/gat_stand_fw/periph/src/ch32v20x_usart.c new file mode 100644 index 0000000..6c89fed --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_usart.c @@ -0,0 +1,740 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_usart.c + * Author : WCH + * Version : V1.0.0 + * Date : 2024/01/06 + * Description : This file provides all the USART firmware functions. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_usart.h" +#include "ch32v20x_rcc.h" + +/* USART_Private_Defines */ +#define CTLR1_UE_Set ((uint16_t)0x2000) /* USART Enable Mask */ +#define CTLR1_UE_Reset ((uint16_t)0xDFFF) /* USART Disable Mask */ + +#define CTLR1_WAKE_Mask ((uint16_t)0xF7FF) /* USART WakeUp Method Mask */ + +#define CTLR1_RWU_Set ((uint16_t)0x0002) /* USART mute mode Enable Mask */ +#define CTLR1_RWU_Reset ((uint16_t)0xFFFD) /* USART mute mode Enable Mask */ +#define CTLR1_SBK_Set ((uint16_t)0x0001) /* USART Break Character send Mask */ +#define CTLR1_CLEAR_Mask ((uint16_t)0xE9F3) /* USART CTLR1 Mask */ +#define CTLR2_Address_Mask ((uint16_t)0xFFF0) /* USART address Mask */ + +#define CTLR2_LINEN_Set ((uint16_t)0x4000) /* USART LIN Enable Mask */ +#define CTLR2_LINEN_Reset ((uint16_t)0xBFFF) /* USART LIN Disable Mask */ + +#define CTLR2_LBDL_Mask ((uint16_t)0xFFDF) /* USART LIN Break detection Mask */ +#define CTLR2_STOP_CLEAR_Mask ((uint16_t)0xCFFF) /* USART CTLR2 STOP Bits Mask */ +#define CTLR2_CLOCK_CLEAR_Mask ((uint16_t)0xF0FF) /* USART CTLR2 Clock Mask */ + +#define CTLR3_SCEN_Set ((uint16_t)0x0020) /* USART SC Enable Mask */ +#define CTLR3_SCEN_Reset ((uint16_t)0xFFDF) /* USART SC Disable Mask */ + +#define CTLR3_NACK_Set ((uint16_t)0x0010) /* USART SC NACK Enable Mask */ +#define CTLR3_NACK_Reset ((uint16_t)0xFFEF) /* USART SC NACK Disable Mask */ + +#define CTLR3_HDSEL_Set ((uint16_t)0x0008) /* USART Half-Duplex Enable Mask */ +#define CTLR3_HDSEL_Reset ((uint16_t)0xFFF7) /* USART Half-Duplex Disable Mask */ + +#define CTLR3_IRLP_Mask ((uint16_t)0xFFFB) /* USART IrDA LowPower mode Mask */ +#define CTLR3_CLEAR_Mask ((uint16_t)0xFCFF) /* USART CTLR3 Mask */ + +#define CTLR3_IREN_Set ((uint16_t)0x0002) /* USART IrDA Enable Mask */ +#define CTLR3_IREN_Reset ((uint16_t)0xFFFD) /* USART IrDA Disable Mask */ +#define GPR_LSB_Mask ((uint16_t)0x00FF) /* Guard Time Register LSB Mask */ +#define GPR_MSB_Mask ((uint16_t)0xFF00) /* Guard Time Register MSB Mask */ +#define IT_Mask ((uint16_t)0x001F) /* USART Interrupt Mask */ + +/********************************************************************* + * @fn USART_DeInit + * + * @brief Deinitializes the USARTx peripheral registers to their default + * reset values. + * + * @param USARTx - where x can be 1, 2 or 3 to select the UART peripheral. + * + * @return none + */ +void USART_DeInit(USART_TypeDef *USARTx) +{ + if(USARTx == USART1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); + } + else if(USARTx == USART2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); + } + else if(USARTx == USART3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); + } + else if(USARTx == UART4) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); + } +} + +/********************************************************************* + * @fn USART_Init + * + * @brief Initializes the USARTx peripheral according to the specified + * parameters in the USART_InitStruct. + * + * @param USARTx - where x can be 1, 2 or 3 to select the UART peripheral. + * USART_InitStruct - pointer to a USART_InitTypeDef structure + * that contains the configuration information for the specified + * USART peripheral. + * + * @return none + */ +void USART_Init(USART_TypeDef *USARTx, USART_InitTypeDef *USART_InitStruct) +{ + uint32_t tmpreg = 0x00, apbclock = 0x00; + uint32_t integerdivider = 0x00; + uint32_t fractionaldivider = 0x00; + uint32_t usartxbase = 0; + RCC_ClocksTypeDef RCC_ClocksStatus; + + if(USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None) + { + } + + usartxbase = (uint32_t)USARTx; + tmpreg = USARTx->CTLR2; + tmpreg &= CTLR2_STOP_CLEAR_Mask; + tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits; + + USARTx->CTLR2 = (uint16_t)tmpreg; + tmpreg = USARTx->CTLR1; + tmpreg &= CTLR1_CLEAR_Mask; + tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | + USART_InitStruct->USART_Mode; + USARTx->CTLR1 = (uint16_t)tmpreg; + + tmpreg = USARTx->CTLR3; + tmpreg &= CTLR3_CLEAR_Mask; + tmpreg |= USART_InitStruct->USART_HardwareFlowControl; + USARTx->CTLR3 = (uint16_t)tmpreg; + + RCC_GetClocksFreq(&RCC_ClocksStatus); + + if(usartxbase == USART1_BASE) + { + apbclock = RCC_ClocksStatus.PCLK2_Frequency; + } + else + { + apbclock = RCC_ClocksStatus.PCLK1_Frequency; + } + integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate))); + tmpreg = (integerdivider / 100) << 4; + fractionaldivider = integerdivider - (100 * (tmpreg >> 4)); + tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F); + USARTx->BRR = (uint16_t)tmpreg; +} + +/********************************************************************* + * @fn USART_StructInit + * + * @brief Fills each USART_InitStruct member with its default value. + * + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure + * which will be initialized. + * + * @return none + */ +void USART_StructInit(USART_InitTypeDef *USART_InitStruct) +{ + USART_InitStruct->USART_BaudRate = 9600; + USART_InitStruct->USART_WordLength = USART_WordLength_8b; + USART_InitStruct->USART_StopBits = USART_StopBits_1; + USART_InitStruct->USART_Parity = USART_Parity_No; + USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; +} + +/********************************************************************* + * @fn USART_ClockInit + * + * @brief Initializes the USARTx peripheral Clock according to the + * specified parameters in the USART_ClockInitStruct . + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_ClockInitStruct - pointer to a USART_ClockInitTypeDef + * structure that contains the configuration information for the specified + * USART peripheral. + * + * @return none + */ +void USART_ClockInit(USART_TypeDef *USARTx, USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + uint32_t tmpreg = 0x00; + + tmpreg = USARTx->CTLR2; + tmpreg &= CTLR2_CLOCK_CLEAR_Mask; + tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | + USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; + USARTx->CTLR2 = (uint16_t)tmpreg; +} + +/********************************************************************* + * @fn USART_ClockStructInit + * + * @brief Fills each USART_ClockStructInit member with its default value. + * + * @param USART_ClockInitStruct - pointer to a USART_ClockInitTypeDef + * structure which will be initialized. + * + * @return none + */ +void USART_ClockStructInit(USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; + USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; + USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; + USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; +} + +/********************************************************************* + * @fn USART_Cmd + * + * @brief Enables or disables the specified USART peripheral. + * reset values (Affects also the I2Ss). + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * NewState: ENABLE or DISABLE. + * + * @return none + */ +void USART_Cmd(USART_TypeDef *USARTx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + USARTx->CTLR1 |= CTLR1_UE_Set; + } + else + { + USARTx->CTLR1 &= CTLR1_UE_Reset; + } +} + +/********************************************************************* + * @fn USART_ITConfig + * + * @brief Enables or disables the specified USART interrupts. + * reset values (Affects also the I2Ss). + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_IT - specifies the USART interrupt sources to be enabled or disabled. + * USART_IT_LBD - LIN Break detection interrupt. + * USART_IT_TXE - Transmit Data Register empty interrupt. + * USART_IT_TC - Transmission complete interrupt. + * USART_IT_RXNE - Receive Data register not empty interrupt. + * USART_IT_IDLE - Idle line detection interrupt. + * USART_IT_PE - Parity Error interrupt. + * USART_IT_ERR - Error interrupt. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void USART_ITConfig(USART_TypeDef *USARTx, uint16_t USART_IT, FunctionalState NewState) +{ + uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00; + uint32_t usartxbase = 0x00; + + + usartxbase = (uint32_t)USARTx; + usartreg = (((uint8_t)USART_IT) >> 0x05); + itpos = USART_IT & IT_Mask; + itmask = (((uint32_t)0x01) << itpos); + + if(usartreg == 0x01) + { + usartxbase += 0x0C; + } + else if(usartreg == 0x02) + { + usartxbase += 0x10; + } + else + { + usartxbase += 0x14; + } + + if(NewState != DISABLE) + { + *(__IO uint32_t *)usartxbase |= itmask; + } + else + { + *(__IO uint32_t *)usartxbase &= ~itmask; + } +} + +/********************************************************************* + * @fn USART_DMACmd + * + * @brief Enables or disables the USART DMA interface. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_DMAReq - specifies the DMA request. + * USART_DMAReq_Tx - USART DMA transmit request. + * USART_DMAReq_Rx - USART DMA receive request. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void USART_DMACmd(USART_TypeDef *USARTx, uint16_t USART_DMAReq, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + USARTx->CTLR3 |= USART_DMAReq; + } + else + { + USARTx->CTLR3 &= (uint16_t)~USART_DMAReq; + } +} + +/********************************************************************* + * @fn USART_SetAddress + * + * @brief Sets the address of the USART node. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_Address - Indicates the address of the USART node. + * + * @return none + */ +void USART_SetAddress(USART_TypeDef *USARTx, uint8_t USART_Address) +{ + USARTx->CTLR2 &= CTLR2_Address_Mask; + USARTx->CTLR2 |= USART_Address; +} + +/********************************************************************* + * @fn USART_WakeUpConfig + * + * @brief Selects the USART WakeUp method. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_WakeUp - specifies the USART wakeup method. + * USART_WakeUp_IdleLine - WakeUp by an idle line detection. + * USART_WakeUp_AddressMark - WakeUp by an address mark. + * + * @return none + */ +void USART_WakeUpConfig(USART_TypeDef *USARTx, uint16_t USART_WakeUp) +{ + USARTx->CTLR1 &= CTLR1_WAKE_Mask; + USARTx->CTLR1 |= USART_WakeUp; +} + +/********************************************************************* + * @fn USART_ReceiverWakeUpCmd + * + * @brief Determines if the USART is in mute mode or not. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void USART_ReceiverWakeUpCmd(USART_TypeDef *USARTx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + USARTx->CTLR1 |= CTLR1_RWU_Set; + } + else + { + USARTx->CTLR1 &= CTLR1_RWU_Reset; + } +} + +/********************************************************************* + * @fn USART_LINBreakDetectLengthConfig + * + * @brief Sets the USART LIN Break detection length. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_LINBreakDetectLength - specifies the LIN break detection length. + * USART_LINBreakDetectLength_10b - 10-bit break detection. + * USART_LINBreakDetectLength_11b - 11-bit break detection. + * + * @return none + */ +void USART_LINBreakDetectLengthConfig(USART_TypeDef *USARTx, uint16_t USART_LINBreakDetectLength) +{ + USARTx->CTLR2 &= CTLR2_LBDL_Mask; + USARTx->CTLR2 |= USART_LINBreakDetectLength; +} + +/********************************************************************* + * @fn USART_LINCmd + * + * @brief Enables or disables the USART LIN mode. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void USART_LINCmd(USART_TypeDef *USARTx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + USARTx->CTLR2 |= CTLR2_LINEN_Set; + } + else + { + USARTx->CTLR2 &= CTLR2_LINEN_Reset; + } +} + +/********************************************************************* + * @fn USART_SendData + * + * @brief Transmits single data through the USARTx peripheral. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * Data - the data to transmit. + * + * @return none + */ +void USART_SendData(USART_TypeDef *USARTx, uint16_t Data) +{ + USARTx->DATAR = (Data & (uint16_t)0x01FF); +} + +/********************************************************************* + * @fn USART_ReceiveData + * + * @brief Returns the most recent received data by the USARTx peripheral. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * + * @return The received data. + */ +uint16_t USART_ReceiveData(USART_TypeDef *USARTx) +{ + return (uint16_t)(USARTx->DATAR & (uint16_t)0x01FF); +} + +/********************************************************************* + * @fn USART_SendBreak + * + * @brief Transmits break characters. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * + * @return none + */ +void USART_SendBreak(USART_TypeDef *USARTx) +{ + USARTx->CTLR1 |= CTLR1_SBK_Set; +} + +/********************************************************************* + * @fn USART_SetGuardTime + * + * @brief Sets the specified USART guard time. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_GuardTime - specifies the guard time. + * + * @return none + */ +void USART_SetGuardTime(USART_TypeDef *USARTx, uint8_t USART_GuardTime) +{ + USARTx->GPR &= GPR_LSB_Mask; + USARTx->GPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08); +} + +/********************************************************************* + * @fn USART_SetPrescaler + * + * @brief Sets the system clock prescaler. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_Prescaler - specifies the prescaler clock. + * + * @return none + */ +void USART_SetPrescaler(USART_TypeDef *USARTx, uint8_t USART_Prescaler) +{ + USARTx->GPR &= GPR_MSB_Mask; + USARTx->GPR |= USART_Prescaler; +} + +/********************************************************************* + * @fn USART_SmartCardCmd + * + * @brief Enables or disables the USART Smart Card mode. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void USART_SmartCardCmd(USART_TypeDef *USARTx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + USARTx->CTLR3 |= CTLR3_SCEN_Set; + } + else + { + USARTx->CTLR3 &= CTLR3_SCEN_Reset; + } +} + +/********************************************************************* + * @fn USART_SmartCardNACKCmd + * + * @brief Enables or disables NACK transmission. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void USART_SmartCardNACKCmd(USART_TypeDef *USARTx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + USARTx->CTLR3 |= CTLR3_NACK_Set; + } + else + { + USARTx->CTLR3 &= CTLR3_NACK_Reset; + } +} + +/********************************************************************* + * @fn USART_HalfDuplexCmd + * + * @brief Enables or disables the USART Half Duplex communication. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void USART_HalfDuplexCmd(USART_TypeDef *USARTx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + USARTx->CTLR3 |= CTLR3_HDSEL_Set; + } + else + { + USARTx->CTLR3 &= CTLR3_HDSEL_Reset; + } +} + +/********************************************************************* + * @fn USART_IrDAConfig + * + * @brief Configures the USART's IrDA interface. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_IrDAMode - specifies the IrDA mode. + * USART_IrDAMode_LowPower. + * USART_IrDAMode_Normal. + * + * @return none + */ +void USART_IrDAConfig(USART_TypeDef *USARTx, uint16_t USART_IrDAMode) +{ + USARTx->CTLR3 &= CTLR3_IRLP_Mask; + USARTx->CTLR3 |= USART_IrDAMode; +} + +/********************************************************************* + * @fn USART_IrDACmd + * + * @brief Enables or disables the USART's IrDA interface. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * NewState - ENABLE or DISABLE. + * + * @return none + */ +void USART_IrDACmd(USART_TypeDef *USARTx, FunctionalState NewState) +{ + if(NewState != DISABLE) + { + USARTx->CTLR3 |= CTLR3_IREN_Set; + } + else + { + USARTx->CTLR3 &= CTLR3_IREN_Reset; + } +} + +/********************************************************************* + * @fn USART_GetFlagStatus + * + * @brief Checks whether the specified USART flag is set or not. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_FLAG - specifies the flag to check. + * USART_FLAG_LBD - LIN Break detection flag. + * USART_FLAG_TXE - Transmit data register empty flag. + * USART_FLAG_TC - Transmission Complete flag. + * USART_FLAG_RXNE - Receive data register not empty flag. + * USART_FLAG_IDLE - Idle Line detection flag. + * USART_FLAG_ORE - OverRun Error flag. + * USART_FLAG_NE - Noise Error flag. + * USART_FLAG_FE - Framing Error flag. + * USART_FLAG_PE - Parity Error flag. + * + * @return bitstatus: SET or RESET + */ +FlagStatus USART_GetFlagStatus(USART_TypeDef *USARTx, uint16_t USART_FLAG) +{ + FlagStatus bitstatus = RESET; + + + if((USARTx->STATR & USART_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/********************************************************************* + * @fn USART_ClearFlag + * + * @brief Clears the USARTx's pending flags. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_FLAG - specifies the flag to clear. + * USART_FLAG_LBD - LIN Break detection flag. + * USART_FLAG_TC - Transmission Complete flag. + * USART_FLAG_RXNE - Receive data register not empty flag. + * Note- + * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) flags are cleared by software + * sequence: a read operation to USART_STATR register (USART_GetFlagStatus()) + * followed by a read operation to USART_DATAR register (USART_ReceiveData()). + * - RXNE flag can be also cleared by a read to the USART_DATAR register + * (USART_ReceiveData()). + * - TC flag can be also cleared by software sequence: a read operation to + * USART_STATR register (USART_GetFlagStatus()) followed by a write operation + * to USART_DATAR register (USART_SendData()). + * - TXE flag is cleared only by a write to the USART_DATAR register + * (USART_SendData()). + * @return none + */ +void USART_ClearFlag(USART_TypeDef *USARTx, uint16_t USART_FLAG) +{ + + USARTx->STATR = (uint16_t)~USART_FLAG; +} + +/********************************************************************* + * @fn USART_GetITStatus + * + * @brief Checks whether the specified USART interrupt has occurred or not. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_IT - specifies the USART interrupt source to check. + * USART_IT_LBD - LIN Break detection interrupt. + * USART_IT_TXE - Tansmit Data Register empty interrupt. + * USART_IT_TC - Transmission complete interrupt. + * USART_IT_RXNE - Receive Data register not empty interrupt. + * USART_IT_IDLE - Idle line detection interrupt. + * USART_IT_ORE_RX - OverRun Error interrupt if the RXNEIE bit is set. + * USART_IT_ORE_ER - OverRun Error interrupt if the EIE bit is set. + * USART_IT_NE - Noise Error interrupt. + * USART_IT_FE - Framing Error interrupt. + * USART_IT_PE - Parity Error interrupt. + * + * @return bitstatus: SET or RESET. + */ +ITStatus USART_GetITStatus(USART_TypeDef *USARTx, uint16_t USART_IT) +{ + uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00; + ITStatus bitstatus = RESET; + + usartreg = (((uint8_t)USART_IT) >> 0x05); + itmask = USART_IT & IT_Mask; + itmask = (uint32_t)0x01 << itmask; + + if(usartreg == 0x01) + { + itmask &= USARTx->CTLR1; + } + else if(usartreg == 0x02) + { + itmask &= USARTx->CTLR2; + } + else + { + itmask &= USARTx->CTLR3; + } + + bitpos = USART_IT >> 0x08; + bitpos = (uint32_t)0x01 << bitpos; + bitpos &= USARTx->STATR; + + if((itmask != (uint16_t)RESET) && (bitpos != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/********************************************************************* + * @fn USART_ClearITPendingBit + * + * @brief Clears the USARTx's interrupt pending bits. + * + * @param USARTx - where x can be 1, 2, 3 to select the USART peripheral. + * USART_IT - specifies the interrupt pending bit to clear. + * USART_IT_LBD - LIN Break detection interrupt. + * USART_IT_TC - Transmission complete interrupt. + * USART_IT_RXNE - Receive Data register not empty interrupt. + * Note- + * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) pending bits are cleared by + * software sequence: a read operation to USART_STATR register + * (USART_GetITStatus()) followed by a read operation to USART_DATAR register + * (USART_ReceiveData()). + * - RXNE pending bit can be also cleared by a read to the USART_DATAR register + * (USART_ReceiveData()). + * - TC pending bit can be also cleared by software sequence: a read + * operation to USART_STATR register (USART_GetITStatus()) followed by a write + * operation to USART_DATAR register (USART_SendData()). + * - TXE pending bit is cleared only by a write to the USART_DATAR register + * (USART_SendData()). + * @return none + */ +void USART_ClearITPendingBit(USART_TypeDef *USARTx, uint16_t USART_IT) +{ + uint16_t bitpos = 0x00, itmask = 0x00; + + bitpos = USART_IT >> 0x08; + itmask = ((uint16_t)0x01 << (uint16_t)bitpos); + USARTx->STATR = (uint16_t)~itmask; +} diff --git a/gat_stand_fw/periph/src/ch32v20x_wwdg.c b/gat_stand_fw/periph/src/ch32v20x_wwdg.c new file mode 100644 index 0000000..730f55c --- /dev/null +++ b/gat_stand_fw/periph/src/ch32v20x_wwdg.c @@ -0,0 +1,141 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_wwdg.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file provides all the WWDG firmware functions. + ********************************************************************************* + * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. + * Attention: This software (modified or not) and binary are used for + * microcontroller manufactured by Nanjing Qinheng Microelectronics. + *******************************************************************************/ +#include "ch32v20x_wwdg.h" +#include "ch32v20x_rcc.h" + +/* CTLR register bit mask */ +#define CTLR_WDGA_Set ((uint32_t)0x00000080) + +/* CFGR register bit mask */ +#define CFGR_WDGTB_Mask ((uint32_t)0xFFFFFE7F) +#define CFGR_W_Mask ((uint32_t)0xFFFFFF80) +#define BIT_Mask ((uint8_t)0x7F) + +/********************************************************************* + * @fn WWDG_DeInit + * + * @brief Deinitializes the WWDG peripheral registers to their default reset values + * + * @return none + */ +void WWDG_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE); +} + +/********************************************************************* + * @fn WWDG_SetPrescaler + * + * @brief Sets the WWDG Prescaler + * + * @param WWDG_Prescaler - specifies the WWDG Prescaler + * WWDG_Prescaler_1 - WWDG counter clock = (PCLK1/4096)/1 + * WWDG_Prescaler_2 - WWDG counter clock = (PCLK1/4096)/2 + * WWDG_Prescaler_4 - WWDG counter clock = (PCLK1/4096)/4 + * WWDG_Prescaler_8 - WWDG counter clock = (PCLK1/4096)/8 + * + * @return none + */ +void WWDG_SetPrescaler(uint32_t WWDG_Prescaler) +{ + uint32_t tmpreg = 0; + tmpreg = WWDG->CFGR & CFGR_WDGTB_Mask; + tmpreg |= WWDG_Prescaler; + WWDG->CFGR = tmpreg; +} + +/********************************************************************* + * @fn WWDG_SetWindowValue + * + * @brief Sets the WWDG window value + * + * @param WindowValue - specifies the window value to be compared to the + * downcounter,which must be lower than 0x80 + * + * @return none + */ +void WWDG_SetWindowValue(uint8_t WindowValue) +{ + __IO uint32_t tmpreg = 0; + + tmpreg = WWDG->CFGR & CFGR_W_Mask; + + tmpreg |= WindowValue & (uint32_t)BIT_Mask; + + WWDG->CFGR = tmpreg; +} + +/********************************************************************* + * @fn WWDG_EnableIT + * + * @brief Enables the WWDG Early Wakeup interrupt(EWI) + * + * @return none + */ +void WWDG_EnableIT(void) +{ + WWDG->CFGR |= (1 << 9); +} + +/********************************************************************* + * @fn WWDG_SetCounter + * + * @brief Sets the WWDG counter value + * + * @param Counter - specifies the watchdog counter value,which must be a + * number between 0x40 and 0x7F + * + * @return none + */ +void WWDG_SetCounter(uint8_t Counter) +{ + WWDG->CTLR = Counter & BIT_Mask; +} + +/********************************************************************* + * @fn WWDG_Enable + * + * @brief Enables WWDG and load the counter value + * + * @param Counter - specifies the watchdog counter value,which must be a + * number between 0x40 and 0x7F + * @return none + */ +void WWDG_Enable(uint8_t Counter) +{ + WWDG->CTLR = CTLR_WDGA_Set | Counter; +} + +/********************************************************************* + * @fn WWDG_GetFlagStatus + * + * @brief Checks whether the Early Wakeup interrupt flag is set or not + * + * @return The new state of the Early Wakeup interrupt flag (SET or RESET) + */ +FlagStatus WWDG_GetFlagStatus(void) +{ + return (FlagStatus)(WWDG->STATR); +} + +/********************************************************************* + * @fn WWDG_ClearFlag + * + * @brief Clears Early Wakeup interrupt flag + * + * @return none + */ +void WWDG_ClearFlag(void) +{ + WWDG->STATR = (uint32_t)RESET; +} diff --git a/gat_stand_fw/startup/startup_ch32v20x_D6.S b/gat_stand_fw/startup/startup_ch32v20x_D6.S new file mode 100644 index 0000000..f0895e2 --- /dev/null +++ b/gat_stand_fw/startup/startup_ch32v20x_D6.S @@ -0,0 +1,254 @@ +;/********************************** (C) COPYRIGHT ******************************* +;* File Name : startup_ch32v20x_D6.s +;* Author : WCH +;* Version : V1.0.1 +;* Date : 2024/01/31 +;* Description : CH32V203F6-CH32V203F8-CH32V203G6-CH32V203G8-CH32V203K6-CH32V203K8-CH32V203C6-CH32V203C8-CH32V203G8 +;* vector table for eclipse toolchain. +;********************************************************************************* +;* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +;* Attention: This software (modified or not) and binary are used for +;* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ + + .section .init,"ax",@progbits + .global _start + .align 1 +_start: + j handle_reset + + .section .vector,"ax",@progbits + .align 1 +_vector_base: + .option norvc; + .word _start + .word 0 + .word NMI_Handler /* NMI */ + .word HardFault_Handler /* Hard Fault */ + .word 0 + .word Ecall_M_Mode_Handler /* Ecall M Mode */ + .word 0 + .word 0 + .word Ecall_U_Mode_Handler /* Ecall U Mode */ + .word Break_Point_Handler /* Break Point */ + .word 0 + .word 0 + .word SysTick_Handler /* SysTick */ + .word 0 + .word SW_Handler /* SW */ + .word 0 + /* External Interrupts */ + .word WWDG_IRQHandler /* Window Watchdog */ + .word PVD_IRQHandler /* PVD through EXTI Line detect */ + .word TAMPER_IRQHandler /* TAMPER */ + .word RTC_IRQHandler /* RTC */ + .word FLASH_IRQHandler /* Flash */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line 0 */ + .word EXTI1_IRQHandler /* EXTI Line 1 */ + .word EXTI2_IRQHandler /* EXTI Line 2 */ + .word EXTI3_IRQHandler /* EXTI Line 3 */ + .word EXTI4_IRQHandler /* EXTI Line 4 */ + .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .word DMA1_Channel2_IRQHandler /* DMA1 Channel 2 */ + .word DMA1_Channel3_IRQHandler /* DMA1 Channel 3 */ + .word DMA1_Channel4_IRQHandler /* DMA1 Channel 4 */ + .word DMA1_Channel5_IRQHandler /* DMA1 Channel 5 */ + .word DMA1_Channel6_IRQHandler /* DMA1 Channel 6 */ + .word DMA1_Channel7_IRQHandler /* DMA1 Channel 7 */ + .word ADC1_2_IRQHandler /* ADC1_2 */ + .word USB_HP_CAN1_TX_IRQHandler /* USB HP and CAN1 TX */ + .word USB_LP_CAN1_RX0_IRQHandler /* USB LP and CAN1RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* EXTI Line 9..5 */ + .word TIM1_BRK_IRQHandler /* TIM1 Break */ + .word TIM1_UP_IRQHandler /* TIM1 Update */ + .word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* EXTI Line 15..10 */ + .word RTCAlarm_IRQHandler /* RTC Alarm through EXTI Line */ + .word USBWakeUp_IRQHandler /* USB Wake up from suspend */ + .word USBFS_IRQHandler /* USBFS Break */ + .word USBFSWakeUp_IRQHandler /* USBFS Wake up from suspend */ + .word UART4_IRQHandler /* UART4 */ + .word DMA1_Channel8_IRQHandler /* DMA1 Channel8 */ + + .option rvc; + .section .text.vector_handler, "ax", @progbits + .weak NMI_Handler /* NMI */ + .weak HardFault_Handler /* Hard Fault */ + .weak Ecall_M_Mode_Handler /* Ecall M Mode */ + .weak Ecall_U_Mode_Handler /* Ecall U Mode */ + .weak Break_Point_Handler /* Break Point */ + .weak SysTick_Handler /* SysTick */ + .weak SW_Handler /* SW */ + .weak WWDG_IRQHandler /* Window Watchdog */ + .weak PVD_IRQHandler /* PVD through EXTI Line detect */ + .weak TAMPER_IRQHandler /* TAMPER */ + .weak RTC_IRQHandler /* RTC */ + .weak FLASH_IRQHandler /* Flash */ + .weak RCC_IRQHandler /* RCC */ + .weak EXTI0_IRQHandler /* EXTI Line 0 */ + .weak EXTI1_IRQHandler /* EXTI Line 1 */ + .weak EXTI2_IRQHandler /* EXTI Line 2 */ + .weak EXTI3_IRQHandler /* EXTI Line 3 */ + .weak EXTI4_IRQHandler /* EXTI Line 4 */ + .weak DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .weak DMA1_Channel2_IRQHandler /* DMA1 Channel 2 */ + .weak DMA1_Channel3_IRQHandler /* DMA1 Channel 3 */ + .weak DMA1_Channel4_IRQHandler /* DMA1 Channel 4 */ + .weak DMA1_Channel5_IRQHandler /* DMA1 Channel 5 */ + .weak DMA1_Channel6_IRQHandler /* DMA1 Channel 6 */ + .weak DMA1_Channel7_IRQHandler /* DMA1 Channel 7 */ + .weak ADC1_2_IRQHandler /* ADC1_2 */ + .weak USB_HP_CAN1_TX_IRQHandler /* USB HP and CAN1 TX */ + .weak USB_LP_CAN1_RX0_IRQHandler /* USB LP and CAN1RX0 */ + .weak CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .weak CAN1_SCE_IRQHandler /* CAN1 SCE */ + .weak EXTI9_5_IRQHandler /* EXTI Line 9..5 */ + .weak TIM1_BRK_IRQHandler /* TIM1 Break */ + .weak TIM1_UP_IRQHandler /* TIM1 Update */ + .weak TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation */ + .weak TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .weak TIM2_IRQHandler /* TIM2 */ + .weak TIM3_IRQHandler /* TIM3 */ + .weak TIM4_IRQHandler /* TIM4 */ + .weak I2C1_EV_IRQHandler /* I2C1 Event */ + .weak I2C1_ER_IRQHandler /* I2C1 Error */ + .weak I2C2_EV_IRQHandler /* I2C2 Event */ + .weak I2C2_ER_IRQHandler /* I2C2 Error */ + .weak SPI1_IRQHandler /* SPI1 */ + .weak SPI2_IRQHandler /* SPI2 */ + .weak USART1_IRQHandler /* USART1 */ + .weak USART2_IRQHandler /* USART2 */ + .weak USART3_IRQHandler /* USART3 */ + .weak EXTI15_10_IRQHandler /* EXTI Line 15..10 */ + .weak RTCAlarm_IRQHandler /* RTC Alarm through EXTI Line */ + .weak USBWakeUp_IRQHandler /* USB Wakeup from suspend */ + .weak USBFS_IRQHandler /* USBFS */ + .weak USBFSWakeUp_IRQHandler /* USBFS Wake Up */ + .weak UART4_IRQHandler /* UART4 */ + .weak DMA1_Channel8_IRQHandler /* DMA1 Channel8 */ + +NMI_Handler: +HardFault_Handler: +Ecall_M_Mode_Handler: +Ecall_U_Mode_Handler: +Break_Point_Handler: +SysTick_Handler: +SW_Handler: +WWDG_IRQHandler: +PVD_IRQHandler: +TAMPER_IRQHandler: +RTC_IRQHandler: +FLASH_IRQHandler: +RCC_IRQHandler: +EXTI0_IRQHandler: +EXTI1_IRQHandler: +EXTI2_IRQHandler: +EXTI3_IRQHandler: +EXTI4_IRQHandler: +DMA1_Channel1_IRQHandler: +DMA1_Channel2_IRQHandler: +DMA1_Channel3_IRQHandler: +DMA1_Channel4_IRQHandler: +DMA1_Channel5_IRQHandler: +DMA1_Channel6_IRQHandler: +DMA1_Channel7_IRQHandler: +ADC1_2_IRQHandler: +USB_HP_CAN1_TX_IRQHandler: +USB_LP_CAN1_RX0_IRQHandler: +CAN1_RX1_IRQHandler: +CAN1_SCE_IRQHandler: +EXTI9_5_IRQHandler: +TIM1_BRK_IRQHandler: +TIM1_UP_IRQHandler: +TIM1_TRG_COM_IRQHandler: +TIM1_CC_IRQHandler: +TIM2_IRQHandler: +TIM3_IRQHandler: +TIM4_IRQHandler: +I2C1_EV_IRQHandler: +I2C1_ER_IRQHandler: +I2C2_EV_IRQHandler: +I2C2_ER_IRQHandler: +SPI1_IRQHandler: +SPI2_IRQHandler: +USART1_IRQHandler: +USART2_IRQHandler: +USART3_IRQHandler: +EXTI15_10_IRQHandler: +RTCAlarm_IRQHandler: +USBWakeUp_IRQHandler: +USBFS_IRQHandler: +USBFSWakeUp_IRQHandler: +UART4_IRQHandler: +DMA1_Channel8_IRQHandler: +1: + j 1b + + .section .text.handle_reset,"ax",@progbits + .weak handle_reset + .align 1 +handle_reset: +.option push +.option norelax + la gp, __global_pointer$ +.option pop +1: + la sp, _eusrstack +2: +/* Load data section from flash to RAM */ + la a0, _data_lma + la a1, _data_vma + la a2, _edata + bgeu a1, a2, 2f +1: + lw t0, (a0) + sw t0, (a1) + addi a0, a0, 4 + addi a1, a1, 4 + bltu a1, a2, 1b +2: +/* Clear bss section */ + la a0, _sbss + la a1, _ebss + bgeu a0, a1, 2f +1: + sw zero, (a0) + addi a0, a0, 4 + bltu a0, a1, 1b +2: +/* Configure pipelining and instruction prediction */ + li t0, 0x1f + csrw 0xbc0, t0 +/* Enable interrupt nesting and hardware stack */ + li t0, 0x3 + csrw 0x804, t0 +/* Enable global interrupt and configure privileged mode */ + li t0, 0x88 + csrw mstatus, t0 +/* Configure the interrupt vector table recognition mode and entry address mode */ + la t0, _vector_base + ori t0, t0, 3 + csrw mtvec, t0 + + jal SystemInit + la t0, main + csrw mepc, t0 + mret + + diff --git a/gat_stand_fw/startup/startup_ch32v20x_D8.S b/gat_stand_fw/startup/startup_ch32v20x_D8.S new file mode 100644 index 0000000..a22ff1a --- /dev/null +++ b/gat_stand_fw/startup/startup_ch32v20x_D8.S @@ -0,0 +1,269 @@ +;/********************************** (C) COPYRIGHT ******************************* +;* File Name : startup_ch32v20x_D8.s +;* Author : WCH +;* Version : V1.0.1 +;* Date : 2024/01/31 +;* Description : CH32V203RB +;* vector table for eclipse toolchain. +;********************************************************************************* +;* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +;* Attention: This software (modified or not) and binary are used for +;* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ + + .section .init,"ax",@progbits + .global _start + .align 1 +_start: + j handle_reset + + .section .vector,"ax",@progbits + .align 1 +_vector_base: + .option norvc; + .word _start + .word 0 + .word NMI_Handler /* NMI */ + .word HardFault_Handler /* Hard Fault */ + .word 0 + .word Ecall_M_Mode_Handler /* Ecall M Mode */ + .word 0 + .word 0 + .word Ecall_U_Mode_Handler /* Ecall U Mode */ + .word Break_Point_Handler /* Break Point */ + .word 0 + .word 0 + .word SysTick_Handler /* SysTick */ + .word 0 + .word SW_Handler /* SW */ + .word 0 + /* External Interrupts */ + .word WWDG_IRQHandler /* Window Watchdog */ + .word PVD_IRQHandler /* PVD through EXTI Line detect */ + .word TAMPER_IRQHandler /* TAMPER */ + .word RTC_IRQHandler /* RTC */ + .word FLASH_IRQHandler /* Flash */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line 0 */ + .word EXTI1_IRQHandler /* EXTI Line 1 */ + .word EXTI2_IRQHandler /* EXTI Line 2 */ + .word EXTI3_IRQHandler /* EXTI Line 3 */ + .word EXTI4_IRQHandler /* EXTI Line 4 */ + .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .word DMA1_Channel2_IRQHandler /* DMA1 Channel 2 */ + .word DMA1_Channel3_IRQHandler /* DMA1 Channel 3 */ + .word DMA1_Channel4_IRQHandler /* DMA1 Channel 4 */ + .word DMA1_Channel5_IRQHandler /* DMA1 Channel 5 */ + .word DMA1_Channel6_IRQHandler /* DMA1 Channel 6 */ + .word DMA1_Channel7_IRQHandler /* DMA1 Channel 7 */ + .word ADC1_2_IRQHandler /* ADC1_2 */ + .word USB_HP_CAN1_TX_IRQHandler /* USB HP and CAN1 TX */ + .word USB_LP_CAN1_RX0_IRQHandler /* USB LP and CAN1RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* EXTI Line 9..5 */ + .word TIM1_BRK_IRQHandler /* TIM1 Break */ + .word TIM1_UP_IRQHandler /* TIM1 Update */ + .word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* EXTI Line 15..10 */ + .word RTCAlarm_IRQHandler /* RTC Alarm through EXTI Line */ + .word USBWakeUp_IRQHandler /* USB Wake up from suspend */ + .word USBFS_IRQHandler /* USBFS Break */ + .word USBFSWakeUp_IRQHandler /* USBFS Wake up from suspend */ + .word ETH_IRQHandler /* ETH global */ + .word ETHWakeUp_IRQHandler /* ETH Wake up */ + .word 0 /* BLE BB */ + .word 0 /* BLE LLE */ + .word TIM5_IRQHandler /* TIM5 */ + .word UART4_IRQHandler /* UART4 */ + .word DMA1_Channel8_IRQHandler /* DMA1 Channel8 */ + .word OSC32KCal_IRQHandler /* OSC32KCal */ + .word OSCWakeUp_IRQHandler /* OSC Wake Up */ + + .option rvc; + .section .text.vector_handler, "ax", @progbits + .weak NMI_Handler /* NMI */ + .weak HardFault_Handler /* Hard Fault */ + .weak Ecall_M_Mode_Handler /* Ecall M Mode */ + .weak Ecall_U_Mode_Handler /* Ecall U Mode */ + .weak Break_Point_Handler /* Break Point */ + .weak SysTick_Handler /* SysTick */ + .weak SW_Handler /* SW */ + .weak WWDG_IRQHandler /* Window Watchdog */ + .weak PVD_IRQHandler /* PVD through EXTI Line detect */ + .weak TAMPER_IRQHandler /* TAMPER */ + .weak RTC_IRQHandler /* RTC */ + .weak FLASH_IRQHandler /* Flash */ + .weak RCC_IRQHandler /* RCC */ + .weak EXTI0_IRQHandler /* EXTI Line 0 */ + .weak EXTI1_IRQHandler /* EXTI Line 1 */ + .weak EXTI2_IRQHandler /* EXTI Line 2 */ + .weak EXTI3_IRQHandler /* EXTI Line 3 */ + .weak EXTI4_IRQHandler /* EXTI Line 4 */ + .weak DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .weak DMA1_Channel2_IRQHandler /* DMA1 Channel 2 */ + .weak DMA1_Channel3_IRQHandler /* DMA1 Channel 3 */ + .weak DMA1_Channel4_IRQHandler /* DMA1 Channel 4 */ + .weak DMA1_Channel5_IRQHandler /* DMA1 Channel 5 */ + .weak DMA1_Channel6_IRQHandler /* DMA1 Channel 6 */ + .weak DMA1_Channel7_IRQHandler /* DMA1 Channel 7 */ + .weak ADC1_2_IRQHandler /* ADC1_2 */ + .weak USB_HP_CAN1_TX_IRQHandler /* USB HP and CAN1 TX */ + .weak USB_LP_CAN1_RX0_IRQHandler /* USB LP and CAN1RX0 */ + .weak CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .weak CAN1_SCE_IRQHandler /* CAN1 SCE */ + .weak EXTI9_5_IRQHandler /* EXTI Line 9..5 */ + .weak TIM1_BRK_IRQHandler /* TIM1 Break */ + .weak TIM1_UP_IRQHandler /* TIM1 Update */ + .weak TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation */ + .weak TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .weak TIM2_IRQHandler /* TIM2 */ + .weak TIM3_IRQHandler /* TIM3 */ + .weak TIM4_IRQHandler /* TIM4 */ + .weak I2C1_EV_IRQHandler /* I2C1 Event */ + .weak I2C1_ER_IRQHandler /* I2C1 Error */ + .weak I2C2_EV_IRQHandler /* I2C2 Event */ + .weak I2C2_ER_IRQHandler /* I2C2 Error */ + .weak SPI1_IRQHandler /* SPI1 */ + .weak SPI2_IRQHandler /* SPI2 */ + .weak USART1_IRQHandler /* USART1 */ + .weak USART2_IRQHandler /* USART2 */ + .weak USART3_IRQHandler /* USART3 */ + .weak EXTI15_10_IRQHandler /* EXTI Line 15..10 */ + .weak RTCAlarm_IRQHandler /* RTC Alarm through EXTI Line */ + .weak USBWakeUp_IRQHandler /* USB Wakeup from suspend */ + .weak USBFS_IRQHandler /* USBFS */ + .weak USBFSWakeUp_IRQHandler /* USBFS Wake Up */ + .weak ETH_IRQHandler /* ETH global */ + .weak ETHWakeUp_IRQHandler /* ETHWakeUp */ + .weak TIM5_IRQHandler /* TIM5 */ + .weak UART4_IRQHandler /* UART4 */ + .weak DMA1_Channel8_IRQHandler /* DMA1 Channel8 */ + .weak OSC32KCal_IRQHandler /* OSC32 KCal */ + .weak OSCWakeUp_IRQHandler /* OSC Wake Up */ + +NMI_Handler: +HardFault_Handler: +Ecall_M_Mode_Handler: +Ecall_U_Mode_Handler: +Break_Point_Handler: +SysTick_Handler: +SW_Handler: +WWDG_IRQHandler: +PVD_IRQHandler: +TAMPER_IRQHandler: +RTC_IRQHandler: +FLASH_IRQHandler: +RCC_IRQHandler: +EXTI0_IRQHandler: +EXTI1_IRQHandler: +EXTI2_IRQHandler: +EXTI3_IRQHandler: +EXTI4_IRQHandler: +DMA1_Channel1_IRQHandler: +DMA1_Channel2_IRQHandler: +DMA1_Channel3_IRQHandler: +DMA1_Channel4_IRQHandler: +DMA1_Channel5_IRQHandler: +DMA1_Channel6_IRQHandler: +DMA1_Channel7_IRQHandler: +ADC1_2_IRQHandler: +USB_HP_CAN1_TX_IRQHandler: +USB_LP_CAN1_RX0_IRQHandler: +CAN1_RX1_IRQHandler: +CAN1_SCE_IRQHandler: +EXTI9_5_IRQHandler: +TIM1_BRK_IRQHandler: +TIM1_UP_IRQHandler: +TIM1_TRG_COM_IRQHandler: +TIM1_CC_IRQHandler: +TIM2_IRQHandler: +TIM3_IRQHandler: +TIM4_IRQHandler: +I2C1_EV_IRQHandler: +I2C1_ER_IRQHandler: +I2C2_EV_IRQHandler: +I2C2_ER_IRQHandler: +SPI1_IRQHandler: +SPI2_IRQHandler: +USART1_IRQHandler: +USART2_IRQHandler: +USART3_IRQHandler: +EXTI15_10_IRQHandler: +RTCAlarm_IRQHandler: +USBWakeUp_IRQHandler: +USBFS_IRQHandler: +USBFSWakeUp_IRQHandler: +ETH_IRQHandler: +ETHWakeUp_IRQHandler: +TIM5_IRQHandler: +OSC32KCal_IRQHandler: +OSCWakeUp_IRQHandler: +UART4_IRQHandler: +DMA1_Channel8_IRQHandler: +1: + j 1b + + .section .text.handle_reset,"ax",@progbits + .weak handle_reset + .align 1 +handle_reset: +.option push +.option norelax + la gp, __global_pointer$ +.option pop +1: + la sp, _eusrstack +2: +/* Load data section from flash to RAM */ + la a0, _data_lma + la a1, _data_vma + la a2, _edata + bgeu a1, a2, 2f +1: + lw t0, (a0) + sw t0, (a1) + addi a0, a0, 4 + addi a1, a1, 4 + bltu a1, a2, 1b +2: +/* Clear bss section */ + la a0, _sbss + la a1, _ebss + bgeu a0, a1, 2f +1: + sw zero, (a0) + addi a0, a0, 4 + bltu a0, a1, 1b +2: +/* Configure pipelining and instruction prediction */ + li t0, 0x1f + csrw 0xbc0, t0 +/* Enable interrupt nesting and hardware stack */ + li t0, 0x3 + csrw 0x804, t0 +/* Enable global interrupt and configure privileged mode */ + li t0, 0x88 + csrw mstatus, t0 +/* Configure the interrupt vector table recognition mode and entry address mode */ + la t0, _vector_base + ori t0, t0, 3 + csrw mtvec, t0 + + jal SystemInit + la t0, main + csrw mepc, t0 + mret diff --git a/gat_stand_fw/startup/startup_ch32v20x_D8W.S b/gat_stand_fw/startup/startup_ch32v20x_D8W.S new file mode 100644 index 0000000..8c63101 --- /dev/null +++ b/gat_stand_fw/startup/startup_ch32v20x_D8W.S @@ -0,0 +1,275 @@ +;/********************************** (C) COPYRIGHT ******************************* +;* File Name : startup_ch32v20x_D8W.s +;* Author : WCH +;* Version : V1.0.1 +;* Date : 2023/11/11 +;* Description : CH32V208x +;* vector table for eclipse toolchain. +;********************************************************************************* +;* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +;* Attention: This software (modified or not) and binary are used for +;* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ + + .section .init,"ax",@progbits + .global _start + .align 1 +_start: + j handle_reset + + .section .vector,"ax",@progbits + .align 1 +_vector_base: + .option norvc; + .word _start + .word 0 + .word NMI_Handler /* NMI */ + .word HardFault_Handler /* Hard Fault */ + .word 0 + .word Ecall_M_Mode_Handler /* Ecall M Mode */ + .word 0 + .word 0 + .word Ecall_U_Mode_Handler /* Ecall U Mode */ + .word Break_Point_Handler /* Break Point */ + .word 0 + .word 0 + .word SysTick_Handler /* SysTick */ + .word 0 + .word SW_Handler /* SW */ + .word 0 + /* External Interrupts */ + .word WWDG_IRQHandler /* Window Watchdog */ + .word PVD_IRQHandler /* PVD through EXTI Line detect */ + .word TAMPER_IRQHandler /* TAMPER */ + .word RTC_IRQHandler /* RTC */ + .word FLASH_IRQHandler /* Flash */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line 0 */ + .word EXTI1_IRQHandler /* EXTI Line 1 */ + .word EXTI2_IRQHandler /* EXTI Line 2 */ + .word EXTI3_IRQHandler /* EXTI Line 3 */ + .word EXTI4_IRQHandler /* EXTI Line 4 */ + .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .word DMA1_Channel2_IRQHandler /* DMA1 Channel 2 */ + .word DMA1_Channel3_IRQHandler /* DMA1 Channel 3 */ + .word DMA1_Channel4_IRQHandler /* DMA1 Channel 4 */ + .word DMA1_Channel5_IRQHandler /* DMA1 Channel 5 */ + .word DMA1_Channel6_IRQHandler /* DMA1 Channel 6 */ + .word DMA1_Channel7_IRQHandler /* DMA1 Channel 7 */ + .word ADC1_2_IRQHandler /* ADC1_2 */ + .word USB_HP_CAN1_TX_IRQHandler /* USB HP and CAN1 TX */ + .word USB_LP_CAN1_RX0_IRQHandler /* USB LP and CAN1RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* EXTI Line 9..5 */ + .word TIM1_BRK_IRQHandler /* TIM1 Break */ + .word TIM1_UP_IRQHandler /* TIM1 Update */ + .word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* EXTI Line 15..10 */ + .word RTCAlarm_IRQHandler /* RTC Alarm through EXTI Line */ + .word USBWakeUp_IRQHandler /* USB Wake up from suspend */ + .word USBFS_IRQHandler /* USBFS Break */ + .word USBFSWakeUp_IRQHandler /* USBFS Wake up from suspend */ + .word ETH_IRQHandler /* ETH global */ + .word ETHWakeUp_IRQHandler /* ETH Wake up */ + .word BB_IRQHandler /* BLE BB */ + .word LLE_IRQHandler /* BLE LLE */ + .word TIM5_IRQHandler /* TIM5 */ + .word UART4_IRQHandler /* UART4 */ + .word DMA1_Channel8_IRQHandler /* DMA1 Channel8 */ + .word OSC32KCal_IRQHandler /* OSC32KCal */ + .word OSCWakeUp_IRQHandler /* OSC Wake Up */ + + .option rvc; + .section .text.vector_handler, "ax", @progbits + .weak NMI_Handler /* NMI */ + .weak HardFault_Handler /* Hard Fault */ + .weak Ecall_M_Mode_Handler /* Ecall M Mode */ + .weak Ecall_U_Mode_Handler /* Ecall U Mode */ + .weak Break_Point_Handler /* Break Point */ + .weak SysTick_Handler /* SysTick */ + .weak SW_Handler /* SW */ + .weak WWDG_IRQHandler /* Window Watchdog */ + .weak PVD_IRQHandler /* PVD through EXTI Line detect */ + .weak TAMPER_IRQHandler /* TAMPER */ + .weak RTC_IRQHandler /* RTC */ + .weak FLASH_IRQHandler /* Flash */ + .weak RCC_IRQHandler /* RCC */ + .weak EXTI0_IRQHandler /* EXTI Line 0 */ + .weak EXTI1_IRQHandler /* EXTI Line 1 */ + .weak EXTI2_IRQHandler /* EXTI Line 2 */ + .weak EXTI3_IRQHandler /* EXTI Line 3 */ + .weak EXTI4_IRQHandler /* EXTI Line 4 */ + .weak DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .weak DMA1_Channel2_IRQHandler /* DMA1 Channel 2 */ + .weak DMA1_Channel3_IRQHandler /* DMA1 Channel 3 */ + .weak DMA1_Channel4_IRQHandler /* DMA1 Channel 4 */ + .weak DMA1_Channel5_IRQHandler /* DMA1 Channel 5 */ + .weak DMA1_Channel6_IRQHandler /* DMA1 Channel 6 */ + .weak DMA1_Channel7_IRQHandler /* DMA1 Channel 7 */ + .weak ADC1_2_IRQHandler /* ADC1_2 */ + .weak USB_HP_CAN1_TX_IRQHandler /* USB HP and CAN1 TX */ + .weak USB_LP_CAN1_RX0_IRQHandler /* USB LP and CAN1RX0 */ + .weak CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .weak CAN1_SCE_IRQHandler /* CAN1 SCE */ + .weak EXTI9_5_IRQHandler /* EXTI Line 9..5 */ + .weak TIM1_BRK_IRQHandler /* TIM1 Break */ + .weak TIM1_UP_IRQHandler /* TIM1 Update */ + .weak TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation */ + .weak TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .weak TIM2_IRQHandler /* TIM2 */ + .weak TIM3_IRQHandler /* TIM3 */ + .weak TIM4_IRQHandler /* TIM4 */ + .weak I2C1_EV_IRQHandler /* I2C1 Event */ + .weak I2C1_ER_IRQHandler /* I2C1 Error */ + .weak I2C2_EV_IRQHandler /* I2C2 Event */ + .weak I2C2_ER_IRQHandler /* I2C2 Error */ + .weak SPI1_IRQHandler /* SPI1 */ + .weak SPI2_IRQHandler /* SPI2 */ + .weak USART1_IRQHandler /* USART1 */ + .weak USART2_IRQHandler /* USART2 */ + .weak USART3_IRQHandler /* USART3 */ + .weak EXTI15_10_IRQHandler /* EXTI Line 15..10 */ + .weak RTCAlarm_IRQHandler /* RTC Alarm through EXTI Line */ + .weak USBWakeUp_IRQHandler /* USB Wakeup from suspend */ + .weak USBFS_IRQHandler /* USBFS */ + .weak USBFSWakeUp_IRQHandler /* USBFS Wake Up */ + .weak ETH_IRQHandler /* ETH global */ + .weak ETHWakeUp_IRQHandler /* ETHWakeUp */ + .weak BB_IRQHandler /* BLE BB */ + .weak LLE_IRQHandler /* BLE LLE */ + .weak TIM5_IRQHandler /* TIM5 */ + .weak UART4_IRQHandler /* UART4 */ + .weak DMA1_Channel8_IRQHandler /* DMA1 Channel8 */ + .weak OSC32KCal_IRQHandler /* OSC32 KCal */ + .weak OSCWakeUp_IRQHandler /* OSC Wake Up */ + +NMI_Handler: +HardFault_Handler: +Ecall_M_Mode_Handler: +Ecall_U_Mode_Handler: +Break_Point_Handler: +SysTick_Handler: +SW_Handler: +WWDG_IRQHandler: +PVD_IRQHandler: +TAMPER_IRQHandler: +RTC_IRQHandler: +FLASH_IRQHandler: +RCC_IRQHandler: +EXTI0_IRQHandler: +EXTI1_IRQHandler: +EXTI2_IRQHandler: +EXTI3_IRQHandler: +EXTI4_IRQHandler: +DMA1_Channel1_IRQHandler: +DMA1_Channel2_IRQHandler: +DMA1_Channel3_IRQHandler: +DMA1_Channel4_IRQHandler: +DMA1_Channel5_IRQHandler: +DMA1_Channel6_IRQHandler: +DMA1_Channel7_IRQHandler: +ADC1_2_IRQHandler: +USB_HP_CAN1_TX_IRQHandler: +USB_LP_CAN1_RX0_IRQHandler: +CAN1_RX1_IRQHandler: +CAN1_SCE_IRQHandler: +EXTI9_5_IRQHandler: +TIM1_BRK_IRQHandler: +TIM1_UP_IRQHandler: +TIM1_TRG_COM_IRQHandler: +TIM1_CC_IRQHandler: +TIM2_IRQHandler: +TIM3_IRQHandler: +TIM4_IRQHandler: +I2C1_EV_IRQHandler: +I2C1_ER_IRQHandler: +I2C2_EV_IRQHandler: +I2C2_ER_IRQHandler: +SPI1_IRQHandler: +SPI2_IRQHandler: +USART1_IRQHandler: +USART2_IRQHandler: +USART3_IRQHandler: +EXTI15_10_IRQHandler: +RTCAlarm_IRQHandler: +USBWakeUp_IRQHandler: +USBFS_IRQHandler: +USBFSWakeUp_IRQHandler: +ETH_IRQHandler: +ETHWakeUp_IRQHandler: +BB_IRQHandler: +LLE_IRQHandler: +TIM5_IRQHandler: +UART4_IRQHandler: +DMA1_Channel8_IRQHandler: +OSC32KCal_IRQHandler: +OSCWakeUp_IRQHandler: +1: + j 1b + + .section .text.handle_reset,"ax",@progbits + .weak handle_reset + .align 1 +handle_reset: +.option push +.option norelax + la gp, __global_pointer$ +.option pop +1: + la sp, _eusrstack +2: +/* Load data section from flash to RAM */ + la a0, _data_lma + la a1, _data_vma + la a2, _edata + bgeu a1, a2, 2f +1: + lw t0, (a0) + sw t0, (a1) + addi a0, a0, 4 + addi a1, a1, 4 + bltu a1, a2, 1b +2: +/* Clear bss section */ + la a0, _sbss + la a1, _ebss + bgeu a0, a1, 2f +1: + sw zero, (a0) + addi a0, a0, 4 + bltu a0, a1, 1b +2: +/* Configure pipelining and instruction prediction */ + li t0, 0x1f + csrw 0xbc0, t0 +/* Enable interrupt nesting and hardware stack */ + li t0, 0x3 + csrw 0x804, t0 +/* Enable global interrupt and configure privileged mode */ + li t0, 0x88 + csrw mstatus, t0 +/* Configure the interrupt vector table recognition mode and entry address mode */ + la t0, _vector_base + ori t0, t0, 3 + csrw mtvec, t0 + + jal SystemInit + la t0, main + csrw mepc, t0 + mret + + diff --git a/gat_stand_fw/user/ch32v20x_conf.h b/gat_stand_fw/user/ch32v20x_conf.h new file mode 100644 index 0000000..d1eeb38 --- /dev/null +++ b/gat_stand_fw/user/ch32v20x_conf.h @@ -0,0 +1,42 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_conf.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : Library configuration file. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_CONF_H +#define __CH32V20x_CONF_H + +#include "ch32v20x_adc.h" +#include "ch32v20x_bkp.h" +#include "ch32v20x_can.h" +#include "ch32v20x_crc.h" +#include "ch32v20x_dbgmcu.h" +#include "ch32v20x_dma.h" +#include "ch32v20x_exti.h" +#include "ch32v20x_flash.h" +#include "ch32v20x_gpio.h" +#include "ch32v20x_i2c.h" +#include "ch32v20x_iwdg.h" +#include "ch32v20x_pwr.h" +#include "ch32v20x_rcc.h" +#include "ch32v20x_rtc.h" +#include "ch32v20x_spi.h" +#include "ch32v20x_tim.h" +#include "ch32v20x_usart.h" +#include "ch32v20x_wwdg.h" +#include "ch32v20x_it.h" +#include "ch32v20x_misc.h" + + +#endif /* __CH32V20x_CONF_H */ + + + + + diff --git a/gat_stand_fw/user/ch32v20x_it.c b/gat_stand_fw/user/ch32v20x_it.c new file mode 100644 index 0000000..13c75eb --- /dev/null +++ b/gat_stand_fw/user/ch32v20x_it.c @@ -0,0 +1,45 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_it.c + * Author : WCH + * Version : V1.0.0 + * Date : 2023/12/29 + * Description : Main Interrupt Service Routines. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x_it.h" + +void NMI_Handler(void) __attribute__((interrupt("WCH-Interrupt-fast"))); +void HardFault_Handler(void) __attribute__((interrupt("WCH-Interrupt-fast"))); + +/********************************************************************* + * @fn NMI_Handler + * + * @brief This function handles NMI exception. + * + * @return none + */ +void NMI_Handler(void) +{ + while (1) + { + } +} + +/********************************************************************* + * @fn HardFault_Handler + * + * @brief This function handles Hard Fault exception. + * + * @return none + */ +void HardFault_Handler(void) +{ + while (1) + { + } +} + + diff --git a/gat_stand_fw/user/ch32v20x_it.h b/gat_stand_fw/user/ch32v20x_it.h new file mode 100644 index 0000000..f68b203 --- /dev/null +++ b/gat_stand_fw/user/ch32v20x_it.h @@ -0,0 +1,20 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_it.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains the headers of the interrupt handlers. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_IT_H +#define __CH32V20x_IT_H + +#include "debug.h" + + +#endif /* __CH32V20x_IT_H */ + + diff --git a/gat_stand_fw/user/main.c b/gat_stand_fw/user/main.c new file mode 100644 index 0000000..67ec1fc --- /dev/null +++ b/gat_stand_fw/user/main.c @@ -0,0 +1,171 @@ +/* + * The GAT Stand + * GAT Host Firmware + * by true + * + * version 0.0.1 + * + * notes: + * + * - last 2K of flash memory is reserved for configuration storage + */ + +#include + +#include "src/btn.h" +#include "src/gat_gpio.h" +#include "src/port_pwr.h" +#include "src/rgbled.h" +#include "src/rtc.h" + + + +void btn_top_push_cb(uint8_t idx) +{ + gat_toggle(); +} + +void btn_bot_push_cb(uint8_t idx) +{ + usb2_toggle(); +} + +static inline void systick_init(void) +{ + SysTick->CMP = (SystemCoreClock / 256 / 8) - 1; // we want a 256Hz interrupt + SysTick->CNT = 0; // clear counter + SysTick->CTLR = 0xB; // start counter in /8 mode, enable interrupts, auto-reset counter + SysTick->SR = 0; // clear count comparison flag + + NVIC_EnableIRQ(SysTicK_IRQn); // enable interrupt +} + +static void gpio_init() +{ + GPIO_InitTypeDef gpio = {0}; + + gpio.GPIO_Speed = GPIO_Speed_2MHz; + + // unused pins + gpio.GPIO_Mode = GPIO_Mode_IPD; + gpio.GPIO_Pin = GPIO_Pin_13; + GPIO_Init(GPIOC, &gpio); + + gpio.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1; + GPIO_Init(GPIOD, &gpio); + + gpio.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8; + GPIO_Init(GPIOA, &gpio); + + gpio.GPIO_Pin = GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_5 | GPIO_Pin_15; + GPIO_Init(GPIOB, &gpio); + + // OSC32K: don't need to configure these pins from defaults + // enabling RTC does whatever is needed for these pins (assumed from example) + + // RGBLED (PA0, PA1, PA2) + RGBLED_PORT->BSHR = RGBLED_PIN_R | RGBLED_PIN_G | RGBLED_PIN_B; + gpio.GPIO_Mode = GPIO_Mode_Out_PP; + gpio.GPIO_Pin = RGBLED_PIN_R | RGBLED_PIN_G | RGBLED_PIN_B; + GPIO_Init(RGBLED_PORT, &gpio); + + // GAT power enable (PA3) + GAT_EN_PORT->BCR = GAT_EN_PIN; + gpio.GPIO_Pin = GAT_EN_PIN; + GPIO_Init(GAT_EN_PORT, &gpio); + + // GAT overcurrent detect (PA4) + gpio.GPIO_Mode = GPIO_Mode_IPU; + gpio.GPIO_Pin = GAT_OC_PIN; + GPIO_Init(GAT_EN_PORT, &gpio); + + // buttons (PB10, PB11) and DIP switches (PB12, PB13, PB14) + gpio.GPIO_Pin = GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14; + GPIO_Init(GPIOB, &gpio); + + // GAT GPIO will be configured later + + // USB PA11, PA12 will be configured later + + // USB2 power enable (PB4) + gpio.GPIO_Mode = GPIO_Mode_Out_PP; + gpio.GPIO_Pin = USB2_EN_PIN; + GPIO_Init(USB2_EN_PORT, &gpio); + + // unused pins that are used for I2C passthrough + gpio.GPIO_Mode = GPIO_Mode_IN_FLOATING; + gpio.GPIO_Pin = GPIO_Pin_15; + GPIO_Init(GPIOA, &gpio); + gpio.GPIO_Pin = GPIO_Pin_3; + GPIO_Init(GPIOB, &gpio); + + // USB PB6, PB7 will be configured later + + // I2C (PB8, PB9) - remapped + GPIO_PinRemapConfig(GPIO_Remap_I2C1, ENABLE); + gpio.GPIO_Speed = GPIO_Speed_10MHz; + gpio.GPIO_Mode = GPIO_Mode_AF_OD; + gpio.GPIO_Mode = GPIO_Pin_8 | GPIO_Pin_9; + GPIO_Init(GPIOB, &gpio); +} + +int main(void) +{ + // configure core + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1); + SystemCoreClockUpdate(); + + // enable peripheral clocks + RCC_APB1PeriphClockCmd( RCC_APB1Periph_PWR | RCC_APB1Periph_BKP | + RCC_APB1Periph_I2C1, ENABLE); + RCC_APB2PeriphClockCmd( RCC_APB2Periph_AFIO | RCC_APB2Periph_GPIOA | + RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOD | + RCC_APB2Periph_ADC1, ENABLE); + + // configure gpio pins + gpio_init(); + + // configure RTC + if (rtc_init()) { + // rtc failed to initialize. let the end user know. + // todo + } + + // initialize buttons + btn_init(); + btn[0].cb_push = btn_top_push_cb; + btn[1].cb_push = btn_bot_push_cb; + + // set GAT GP pins weak pull to address the addon + gat_gpio_init(); + + // set output ports to saved state, or on if no batt / first boot + port_pwr_init(); + + // start up rgbled + rgbled_init(); + + // finally, get the system tick interrupt going + systick_init(); + + // let's do this + while (1) { + __WFI(); + } +} + + +uint8_t st_tick; +volatile uint32_t uptime; + +void SysTick_Handler(void) +{ + st_tick++; + if (!st_tick) uptime++; + + btn_poll(); + + if (!(st_tick & 0x3)) { + rgbled_update(); + } +} diff --git a/gat_stand_fw/user/src/btn.c b/gat_stand_fw/user/src/btn.c new file mode 100644 index 0000000..45f9785 --- /dev/null +++ b/gat_stand_fw/user/src/btn.c @@ -0,0 +1,106 @@ +/* + * btn.c + * + * handles buttons as well as the + * DIP switches (in case action is desired by hot-switching) + */ + + +#include + +#include "btn.h" + + + +struct Btn btn[BTN_COUNT] = {0}; + + + +void btn_init() +{ + uint8_t i; + + // this function assumes GPIO has been configured already + + // initialize default setup + btn[0]._pintype = BTN1_PIN; + btn[1]._pintype = BTN2_PIN; + + btn[2]._pintype = DIP1_PIN; + btn[3]._pintype = DIP2_PIN; + btn[4]._pintype = DIP3_PIN; + + for (i = 0; i < BTN_COUNT; i++) { + btn[i]._mask = BTN_RELEASE; + + // ignore any currently pressed buttons + if (!(BTN_PORT->INDR & (1 << (btn[i]._pintype & BTN_PIN_MASK)))) { + btn[0]._mask |= BTN_IGNORE; + } + } +} + +void btn_poll() +{ + uint8_t i; + uint8_t r; + uint8_t ignore; + + uint8_t pushed; + + for (i = 0; i < BTN_COUNT; i++) { + pushed = 0; + + ignore = btn[i]._mask & BTN_IGNORE; + r = BTN_PORT->INDR & (1 << (btn[i]._pintype & BTN_PIN_MASK)); + + // active low type buttons + if (!r) pushed = 1; + + if (pushed) { + // hold counter + if (btn[i]._count < 0xffff) btn[i]._count++; + + // pushed long enough? + if (btn[i]._count < BTN_DEBOUNCE) continue; + + // first push? + if (!(btn[i]._mask & BTN_PUSH)) { + btn[i]._mask = BTN_PUSH | ignore; + if (btn[i].cb_push && !ignore) { + btn[i].cb_push(i); + btn[i]._mask |= (BTN_PUSH << 4); + } + } else if (btn[i]._count >= btn[i].hold) { + // held to count limit + + // if button is not repeatable, do not retrigger + if ((btn[i]._mask & BTN_HOLD) && !btn[i].repeat) continue; + + btn[i]._mask |= BTN_HOLD; + // call callback only if not in ignore state + if (btn[i].cb_hold && !ignore) { + btn[i].cb_hold(i); + btn[i]._mask |= (BTN_HOLD << 4); + } + + // apply repeat rate to count + if (btn[i].repeat > btn[i]._count) { + btn[i]._count = 0; + } else btn[i]._count -= btn[i].repeat; + } + } else { + // is not pushed + if (!(btn[i]._mask & BTN_RELEASE)) { + // note: release will remove ignore status + btn[i]._mask = BTN_RELEASE; + btn[i]._count = 0; + // call callback only if not in ignore state + if (btn[i].cb_release && !ignore) { + btn[i].cb_release(i); + btn[i]._mask |= (BTN_RELEASE << 4); + } + } + } + } +} diff --git a/gat_stand_fw/user/src/btn.h b/gat_stand_fw/user/src/btn.h new file mode 100644 index 0000000..22ba6c6 --- /dev/null +++ b/gat_stand_fw/user/src/btn.h @@ -0,0 +1,58 @@ +/* + * btn.h + */ + +#ifndef USER_SRC_BTN_H_ +#define USER_SRC_BTN_H_ + + + +#include + + + +#define BTN_COUNT 5 +#define BTN_DEBOUNCE (24 / 4) // debounce time in ~4ms increments + +#define BTN_PORT GPIOB + +#define BTN1_PIN 10 +#define BTN2_PIN 11 + +#define DIP1_PIN 12 +#define DIP2_PIN 13 +#define DIP3_PIN 14 + +#define BTN_PIN_MASK 0xf + + +#define BTN_PUSH (1 << 0) +#define BTN_HOLD (1 << 1) +#define BTN_RELEASE (1 << 2) +#define BTN_IGNORE (1 << 3) + + + +typedef struct Btn { + uint8_t _pintype; + uint8_t _mask; + uint16_t _count; // held counts + uint16_t hold; // initial hold + uint16_t repeat; // repeated hold + void (*cb_push)(uint8_t); + void (*cb_hold)(uint8_t); + void (*cb_release)(uint8_t); +} Btn; + + + +extern struct Btn btn[BTN_COUNT]; + + + +void btn_init(); +void btn_poll(); + + + +#endif /* USER_SRC_BTN_H_ */ diff --git a/gat_stand_fw/user/src/gat_gpio.c b/gat_stand_fw/user/src/gat_gpio.c new file mode 100644 index 0000000..a03da4a --- /dev/null +++ b/gat_stand_fw/user/src/gat_gpio.c @@ -0,0 +1,24 @@ +/* + * gat_gpio.c + * + * Created on: Oct 16, 2024 + * Author: true + */ + + +#include "gat_gpio.h" + + + +static GPIO_InitTypeDef gpio; + + + +void gat_gpio_init() +{ + // set the ID to 0 on GP pins. + gpio.GPIO_Speed = GPIO_Speed_2MHz; + gpio.GPIO_Mode = GPIO_Mode_IPD; + gpio.GPIO_Pin = (1 << GAT_GP1_PIN) | (1 << GAT_GP2_PIN); + GPIO_Init(GAT_GPIO_PORT, &gpio); +} diff --git a/gat_stand_fw/user/src/gat_gpio.h b/gat_stand_fw/user/src/gat_gpio.h new file mode 100644 index 0000000..5560bb6 --- /dev/null +++ b/gat_stand_fw/user/src/gat_gpio.h @@ -0,0 +1,28 @@ +/* + * gat_gpio.h + * + * Created on: Oct 16, 2024 + * Author: true + */ + +#ifndef USER_SRC_GAT_GPIO_H_ +#define USER_SRC_GAT_GPIO_H_ + + + +#include + + + +#define GAT_GPIO_PORT GPIOA + +#define GAT_GP1_PIN 9 +#define GAT_GP2_PIN 10 + + + +void gat_gpio_init(); + + + +#endif /* USER_SRC_GAT_GPIO_H_ */ diff --git a/gat_stand_fw/user/src/port_pwr.c b/gat_stand_fw/user/src/port_pwr.c new file mode 100644 index 0000000..e1ede7d --- /dev/null +++ b/gat_stand_fw/user/src/port_pwr.c @@ -0,0 +1,103 @@ +/* + * port_pwr.c + * + * Created Oct 16, 2024 + * + * power control for GAT and USB ports. + */ + + +#include +#include "port_pwr.h" + + + +#define PORT_PWR_STATE_DR BKP_DR3 + +#define GAT_ON_FLAG (1 << 0) +#define USB2_ON_FLAG (1 << 1) + +#define INIT_FLAG (0xa0 << 8) + + + +static uint8_t port_pwr_state; +static uint8_t gat_oc_state_latch = 0; + + + +void gat_on() +{ + if (gat_oc_state_latch) return; + + GAT_EN_PORT->BSHR = GAT_EN_PIN; + + port_pwr_state |= GAT_ON_FLAG; + BKP_WriteBackupRegister(PORT_PWR_STATE_DR, port_pwr_state); +} + +void gat_off() +{ + GAT_EN_PORT->BCR = GAT_EN_PIN; + + port_pwr_state &= ~GAT_ON_FLAG; + BKP_WriteBackupRegister(PORT_PWR_STATE_DR, port_pwr_state); +} + +uint8_t gat_pwr_state() +{ + return (GAT_EN_PORT->OUTDR & GAT_EN_PIN) ? 1 : 0; +} + +uint8_t gat_oc_state() +{ + if (!(GAT_OC_PORT->INDR & GAT_OC_PIN)) { + gat_oc_state_latch = 1; + gat_off(); + } + + return gat_oc_state_latch; +} + +void gat_toggle() +{ + if (gat_pwr_state()) gat_off(); + else gat_on(); +} + +void usb2_on() +{ + port_pwr_state |= USB2_ON_FLAG; + BKP_WriteBackupRegister(PORT_PWR_STATE_DR, port_pwr_state); +} + +void usb2_off() +{ + port_pwr_state &= ~USB2_ON_FLAG; + BKP_WriteBackupRegister(PORT_PWR_STATE_DR, port_pwr_state); +} + +uint8_t usb2_pwr_state() +{ + return (USB2_EN_PORT->OUTDR & USB2_EN_PIN) ? 1 : 0; +} + +void usb2_toggle() +{ + if (usb2_pwr_state()) gat_off(); + else gat_on(); +} + + +void port_pwr_init() +{ + port_pwr_state = BKP_ReadBackupRegister(PORT_PWR_STATE_DR); + + if ((port_pwr_state & INIT_FLAG) != INIT_FLAG) { + // no battery retention. + // automatically turn on all outputs + port_pwr_state |= INIT_FLAG; + gat_on(); + usb2_on(); + } +} diff --git a/gat_stand_fw/user/src/port_pwr.h b/gat_stand_fw/user/src/port_pwr.h new file mode 100644 index 0000000..f407a28 --- /dev/null +++ b/gat_stand_fw/user/src/port_pwr.h @@ -0,0 +1,46 @@ +/* + * port_pwr.h + * + * Created on: Oct 16, 2024 + * Author: true + */ + +#ifndef USER_SRC_PORT_PWR_H_ +#define USER_SRC_PORT_PWR_H_ + + + +#include + + + +// GAT port enable pin +#define GAT_EN_PORT GPIOA +#define GAT_EN_PIN GPIO_Pin_3 + +// overcurrent detect pin, active low +#define GAT_OC_PORT GPIOA +#define GAT_OC_PIN GPIO_Pin_4 + +#define USB2_EN_PORT GPIOB +#define USB2_EN_PIN GPIO_Pin_4 + + + +void port_pwr_init(); + +uint8_t gat_oc_state(); + +void gat_on(); +void gat_off(); +void gat_toggle(); +uint8_t gat_pwr_state(); + +void usb2_on(); +void usb2_off(); +void usb2_toggle(); +uint8_t usb2_pwr_state(); + + + +#endif /* USER_SRC_PORT_PWR_H_ */ diff --git a/gat_stand_fw/user/src/rgbled.c b/gat_stand_fw/user/src/rgbled.c new file mode 100644 index 0000000..9b573d6 --- /dev/null +++ b/gat_stand_fw/user/src/rgbled.c @@ -0,0 +1,119 @@ +/* + * rgbled.c + * + * using TIM2 CH1-CH3 + */ + +#include +#include + +#include "rtc.h" + +#include "port_pwr.h" + + + +#define RED 0 +#define GRN 1 +#define BLU 2 + +#define BRT_RED 200 +#define BRT_GRN 100 +#define BRT_BLU 200 + +#define RGBLED_TIM TIM2 + + + +static uint8_t flash_timeout[3]; +static uint8_t flash[3] = {0}; +static uint8_t state[3] = {0}; + + + +void rgbled_set() +{ + uint8_t i; + + // flash counters + for (i = 0; i < 3; i++) { + if (!flash[i]) { + flash[i] = flash_timeout[i]; + } else flash[i]--; + + switch (flash_timeout[i]) { + // always on + case 0x00: { + state[i] = 1; + break; + } + + // always off + case 0xff: { + state[i] = 0; + break; + } + + // standard + default: { + if (flash[i] == flash_timeout[i]) { + state[i] ^= 1; + } + } + } + } + + RGBLED_TIM->CH1CVR = state[RED] ? BRT_RED : 0; + RGBLED_TIM->CH2CVR = state[GRN] ? BRT_GRN : 0; + RGBLED_TIM->CH3CVR = state[BLU] ? BRT_BLU : 0; +} + +void rgbled_update() +{ + uint16_t w; + + // VCR flash if clock isn't set + w = BKP_ReadBackupRegister(RTC_STATE_DR); + switch (w) { + case RTC_STATE_UNINITIALIZED: { + flash_timeout[BLU] = 254; + break; + } + default: { + flash_timeout[BLU] = 0; + break; + } + } + + flash_timeout[GRN] = gat_pwr_state() ? 0 : 0xff; + flash_timeout[RED] = gat_oc_state() ? 50 : 0xff; +} + +void rgbled_init() +{ + TIM_TimeBaseInitTypeDef timer ={0}; + TIM_OCInitTypeDef pwm = {0}; + + timer.TIM_Period = (1 << 10) - 1; // 10-bit + timer.TIM_Prescaler = 0; + timer.TIM_ClockDivision = TIM_CKD_DIV1; + timer.TIM_CounterMode = TIM_CounterMode_Up; + TIM_TimeBaseInit(RGBLED_TIM, &timer); + + pwm.TIM_OCMode = TIM_OCMode_PWM1; + pwm.TIM_OutputState = TIM_OutputState_Enable; + pwm.TIM_Pulse = 0; + pwm.TIM_OCPolarity = TIM_OCPolarity_High; + TIM_OC1Init(RGBLED_TIM, &pwm); + TIM_OC2Init(RGBLED_TIM, &pwm); + TIM_OC3Init(RGBLED_TIM, &pwm); + + TIM_CtrlPWMOutputs(RGBLED_TIM, ENABLE); + TIM_OC1PreloadConfig(RGBLED_TIM, TIM_OCPreload_Disable); + TIM_ARRPreloadConfig(RGBLED_TIM, ENABLE); + TIM_Cmd(RGBLED_TIM, ENABLE); + + RGBLED_TIM->CH1CVR = 0; + RGBLED_TIM->CH2CVR = 0; + RGBLED_TIM->CH3CVR = 0; +} diff --git a/gat_stand_fw/user/src/rgbled.h b/gat_stand_fw/user/src/rgbled.h new file mode 100644 index 0000000..3db5707 --- /dev/null +++ b/gat_stand_fw/user/src/rgbled.h @@ -0,0 +1,24 @@ +/* + * rgbled.h + * + * Created on: Oct 16, 2024 + * Author: true + */ + +#ifndef USER_SRC_RGBLED_H_ +#define USER_SRC_RGBLED_H_ + + + +#define RGBLED_PORT GPIOA +#define RGBLED_PIN_R GPIO_Pin_0 +#define RGBLED_PIN_G GPIO_Pin_1 +#define RGBLED_PIN_B GPIO_Pin_2 + + + +void rgbled_update(); + + + +#endif /* USER_SRC_RGBLED_H_ */ diff --git a/gat_stand_fw/user/src/rtc.c b/gat_stand_fw/user/src/rtc.c new file mode 100644 index 0000000..02c093c --- /dev/null +++ b/gat_stand_fw/user/src/rtc.c @@ -0,0 +1,160 @@ +/* + * rtc.c + * + * Created on: Oct 16, 2024 + * Author: true + */ + + +#include +#include + +#include "rtc.h" + + + +#define RTC_INIT_PATTERN 0x1337 + + + +static const uint8_t days_per_mon[12] = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; + + + +uint8_t rtc_state; + + + +void rtc_set_state(uint16_t state) +{ + rtc_state = state; +} + +/* + * @fn rtc_is_leapyear + * @brief Returns true if year is a leap year. + * + * @param year + * + * @return 1 - Yes + * 0 - No + */ +uint8_t rtc_is_leapyear(u16 year) +{ + if (year % 4 == 0) { + if (year % 100 == 0) { + if (year % 400 == 0) { + return 1; + } else { + return 0; + } + } + else return 1; + } + else return 0; +} + +/* + * @fn rtc_set_clock + * @brief Set Time. + * + * @param Struct of RTClock + * + * @return 1 - error + * 0 - success + */ +int8_t rtc_set_clock(struct RTClock *c) +{ + uint16_t x; + uint8_t m; + uint32_t count = 0; + + if(c->year < 1970 || c->year > 2099) + return -1; + + for(x = 1970; x < c->year; x++) { + if (rtc_is_leapyear(x)) + count += 31622400; + else + count += 31536000; + } + + m = c->mon - 1; + for(x = 0; x < m; x++){ + count += (u32)days_per_mon[x] * 86400; + if(rtc_is_leapyear(c->year) && x == 1) + count += 86400; + } + + count += (u32)(c->day - 1) * 86400; + count += (u32)c->h * 3600; + count += (u32)c->m * 60; + count += c->s; + + PWR_BackupAccessCmd(ENABLE); + RTC_SetCounter(count); + RTC_WaitForLastTask(); + + return 0; +} + +int8_t rtc_init() +{ + uint32_t timeout; + static const struct RTClock clock = { + .year = 2024, + .mon = 11, + .day = 1, + .h = 8, + .m = 0, + .s = 0 + }; + + // enable access to RTC registers + PWR_BackupAccessCmd(ENABLE); + + // get RTC state + // if things aren't configured it'll be initialized in a moment + rtc_state = BKP_ReadBackupRegister(RTC_STATE_DR); + + // is RTC already configured? + if (BKP_ReadBackupRegister(RTC_INIT_DR) != RTC_INIT_PATTERN) { + // must not be. initialize rtc + BKP_DeInit(); + + RCC_LSEConfig(RCC_LSE_ON); + + timeout = SystemCoreClock / 2; + while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET && timeout--); + + // if crystal didn't start in time, let the application know + if (!timeout) return -1; + + // use crystal for RTC and enable it + RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE); + RCC_RTCCLKCmd(ENABLE); + RTC_WaitForLastTask(); + RTC_WaitForSynchro(); + // RTC_ITConfig(RTC_IT_ALR, ENABLE); + // RTC_ITConfig(RTC_IT_SEC, ENABLE); + // RTC_WaitForLastTask(); + + RTC_EnterConfigMode(); + RTC_SetPrescaler(32767); + RTC_WaitForLastTask(); + + // set an initial time + + rtc_set_clock((struct RTClock *)&clock); + RTC_ExitConfigMode(); + + rtc_state = RTC_STATE_CLOCK_NOT_SET; + BKP_WriteBackupRegister(RTC_STATE_DR, rtc_state); + BKP_WriteBackupRegister(RTC_INIT_DR, RTC_INIT_PATTERN); + + // RTC_NVIC_Config(); + // RTC_Get(); + } + + return 0; +} diff --git a/gat_stand_fw/user/src/rtc.h b/gat_stand_fw/user/src/rtc.h new file mode 100644 index 0000000..9c7bd75 --- /dev/null +++ b/gat_stand_fw/user/src/rtc.h @@ -0,0 +1,44 @@ +/* + * rtc.h + * + * Created on: Oct 16, 2024 + * Author: true + */ + +#ifndef USER_SRC_RTC_H_ +#define USER_SRC_RTC_H_ + + +#include + + + +#define RTC_INIT_DR BKP_DR1 +#define RTC_STATE_DR BKP_DR2 + + + +enum RTCState { + RTC_STATE_UNINITIALIZED = 0, + RTC_STATE_CLOCK_NOT_SET, + RTC_STATE_OK = 0x7f +}; + +typedef struct RTClock { + uint16_t year; + uint8_t mon; + uint8_t day; + uint8_t h; + uint8_t m; + uint8_t s; +} RTClock; + + + +int8_t rtc_init(); + +int8_t rtc_set_clock(struct RTClock *c); + + + +#endif /* USER_SRC_RTC_H_ */ diff --git a/gat_stand_fw/user/system_ch32v20x.c b/gat_stand_fw/user/system_ch32v20x.c new file mode 100644 index 0000000..baf28f5 --- /dev/null +++ b/gat_stand_fw/user/system_ch32v20x.c @@ -0,0 +1,987 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : system_ch32v20x.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : CH32V20x Device Peripheral Access Layer System Source File. + * For HSE = 32Mhz (CH32V208x/CH32V203RBT6) + * For HSE = 8Mhz (other CH32V203x) +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x.h" + +/* +* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after +* reset the HSI is used as SYSCLK source). +* If none of the define below is enabled, the HSI is used as System clock source. +*/ +//#define SYSCLK_FREQ_HSE HSE_VALUE +//#define SYSCLK_FREQ_48MHz_HSE 48000000 +//#define SYSCLK_FREQ_56MHz_HSE 56000000 +//#define SYSCLK_FREQ_72MHz_HSE 72000000 +//#define SYSCLK_FREQ_96MHz_HSE 96000000 +//#define SYSCLK_FREQ_120MHz_HSE 120000000 +//#define SYSCLK_FREQ_144MHz_HSE 144000000 +//#define SYSCLK_FREQ_HSI HSI_VALUE +//#define SYSCLK_FREQ_48MHz_HSI 48000000 +//#define SYSCLK_FREQ_56MHz_HSI 56000000 +#define SYSCLK_FREQ_72MHz_HSI 72000000 +//#define SYSCLK_FREQ_96MHz_HSI 96000000 +//#define SYSCLK_FREQ_120MHz_HSI 120000000 +//#define SYSCLK_FREQ_144MHz_HSI 144000000 + +/* Clock Definitions */ +#ifdef SYSCLK_FREQ_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_96MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_120MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_144MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_96MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_120MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_144MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSI; /* System Clock Frequency (Core Clock) */ +#else +uint32_t SystemCoreClock = HSI_VALUE; /* System Clock Frequency (Core Clock) */ + +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + + +/* system_private_function_proto_types */ +static void SetSysClock(void); + +#ifdef SYSCLK_FREQ_HSE +static void SetSysClockToHSE( void ); +#elif defined SYSCLK_FREQ_48MHz_HSE +static void SetSysClockTo48_HSE( void ); +#elif defined SYSCLK_FREQ_56MHz_HSE +static void SetSysClockTo56_HSE( void ); +#elif defined SYSCLK_FREQ_72MHz_HSE +static void SetSysClockTo72_HSE( void ); +#elif defined SYSCLK_FREQ_96MHz_HSE +static void SetSysClockTo96_HSE( void ); +#elif defined SYSCLK_FREQ_120MHz_HSE +static void SetSysClockTo120_HSE( void ); +#elif defined SYSCLK_FREQ_144MHz_HSE +static void SetSysClockTo144_HSE( void ); +#elif defined SYSCLK_FREQ_48MHz_HSI +static void SetSysClockTo48_HSI( void ); +#elif defined SYSCLK_FREQ_56MHz_HSI +static void SetSysClockTo56_HSI( void ); +#elif defined SYSCLK_FREQ_72MHz_HSI +static void SetSysClockTo72_HSI( void ); +#elif defined SYSCLK_FREQ_96MHz_HSI +static void SetSysClockTo96_HSI( void ); +#elif defined SYSCLK_FREQ_120MHz_HSI +static void SetSysClockTo120_HSI( void ); +#elif defined SYSCLK_FREQ_144MHz_HSI +static void SetSysClockTo144_HSI( void ); + +#endif + +/********************************************************************* + * @fn SystemInit + * + * @brief Setup the microcontroller system Initialize the Embedded Flash Interface, + * the PLL and update the SystemCoreClock variable. + * + * @return none + */ +void SystemInit (void) +{ + RCC->CTLR |= (uint32_t)0x00000001; + RCC->CFGR0 &= (uint32_t)0xF0FF0000; + RCC->CTLR &= (uint32_t)0xFEF6FFFF; + RCC->CTLR &= (uint32_t)0xFFFBFFFF; + RCC->CFGR0 &= (uint32_t)0xFF00FFFF; + RCC->INTR = 0x009F0000; + SetSysClock(); +} + + +/********************************************************************* + * @fn SystemCoreClockUpdate + * + * @brief Update SystemCoreClock variable according to Clock Register Values. + * + * @return none + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, Pll_6_5 = 0; + + tmp = RCC->CFGR0 & RCC_SWS; + + switch (tmp) + { + case 0x00: + SystemCoreClock = HSI_VALUE; + break; + case 0x04: + SystemCoreClock = HSE_VALUE; + break; + case 0x08: + pllmull = RCC->CFGR0 & RCC_PLLMULL; + pllsource = RCC->CFGR0 & RCC_PLLSRC; + pllmull = ( pllmull >> 18) + 2; + + if(pllmull == 17) pllmull = 18; + + if (pllsource == 0x00) + { + if(EXTEN->EXTEN_CTR & EXTEN_PLL_HSI_PRE){ + SystemCoreClock = HSI_VALUE * pllmull; + } + else{ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + } + else + { +#if defined (CH32V20x_D8W) + if((RCC->CFGR0 & (3<<22)) == (3<<22)) + { + SystemCoreClock = ((HSE_VALUE>>1)) * pllmull; + } + else +#endif + if ((RCC->CFGR0 & RCC_PLLXTPRE) != (uint32_t)RESET) + { +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + SystemCoreClock = ((HSE_VALUE>>2) >> 1) * pllmull; +#else + SystemCoreClock = (HSE_VALUE >> 1) * pllmull; +#endif + } + else + { +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + SystemCoreClock = (HSE_VALUE>>2) * pllmull; +#else + SystemCoreClock = HSE_VALUE * pllmull; +#endif + } + } + + if(Pll_6_5 == 1) SystemCoreClock = (SystemCoreClock / 2); + + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + + tmp = AHBPrescTable[((RCC->CFGR0 & RCC_HPRE) >> 4)]; + SystemCoreClock >>= tmp; +} + +/********************************************************************* + * @fn SetSysClock + * + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClock(void) +{ + //GPIO_IPD_Unused(); +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_48MHz_HSE + SetSysClockTo48_HSE(); +#elif defined SYSCLK_FREQ_56MHz_HSE + SetSysClockTo56_HSE(); +#elif defined SYSCLK_FREQ_72MHz_HSE + SetSysClockTo72_HSE(); +#elif defined SYSCLK_FREQ_96MHz_HSE + SetSysClockTo96_HSE(); +#elif defined SYSCLK_FREQ_120MHz_HSE + SetSysClockTo120_HSE(); +#elif defined SYSCLK_FREQ_144MHz_HSE + SetSysClockTo144_HSE(); +#elif defined SYSCLK_FREQ_48MHz_HSI + SetSysClockTo48_HSI(); +#elif defined SYSCLK_FREQ_56MHz_HSI + SetSysClockTo56_HSI(); +#elif defined SYSCLK_FREQ_72MHz_HSI + SetSysClockTo72_HSI(); +#elif defined SYSCLK_FREQ_96MHz_HSI + SetSysClockTo96_HSI(); +#elif defined SYSCLK_FREQ_120MHz_HSI + SetSysClockTo120_HSI(); +#elif defined SYSCLK_FREQ_144MHz_HSI + SetSysClockTo144_HSI(); + +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + * source (default after reset) + */ +} + + +#ifdef SYSCLK_FREQ_HSE + +/********************************************************************* + * @fn SetSysClockToHSE + * + * @brief Sets HSE as System clock source and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockToHSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1; + + /* Select HSE as system clock source + * CH32V20x_D6 (HSE=8MHZ) + * CH32V20x_D8 (HSE=32MHZ) + * CH32V20x_D8W (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x04) + { + } + } + else + { + /* If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_48MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo48_HSE + * + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo48_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 6 = 48 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL6); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_56MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo56_HSE + * + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo56_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 7 = 56 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL7); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_72MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo72_HSE + * + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo72_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 9 = 72 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL9); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + + +#elif defined SYSCLK_FREQ_96MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo96_HSE + * + * @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo96_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 12 = 96 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL12); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + + +#elif defined SYSCLK_FREQ_120MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo120_HSE + * + * @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo120_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if(HSEStatus == (uint32_t)0x01) + { +#if defined (CH32V20x_D8W) + RCC->CFGR0 |= (uint32_t)(3<<22); + /* HCLK = SYSCLK/2 */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV2; +#else + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; +#endif + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 15 = 120 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 15 = 120 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/2 * 15 = 240 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL15); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} +#elif defined SYSCLK_FREQ_144MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo144_HSE + * + * @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo144_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 18 = 144 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL18); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_48MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo48_HSI + * + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo48_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 6 = 48 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL6); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_56MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo56_HSI + * + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo56_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 7 = 48 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL7); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_72MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo72_HSI + * + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo72_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 9 = 72 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL9); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + + +#elif defined SYSCLK_FREQ_96MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo96_HSI + * + * @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo96_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 12 = 96 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL12); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + + +#elif defined SYSCLK_FREQ_120MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo120_HSI + * + * @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo120_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 15 = 120 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL15); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} +#elif defined SYSCLK_FREQ_144MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo144_HSI + * + * @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo144_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 18 = 144 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL18); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + + +#endif diff --git a/gat_stand_fw/user/system_ch32v20x.h b/gat_stand_fw/user/system_ch32v20x.h new file mode 100644 index 0000000..9c8a3f7 --- /dev/null +++ b/gat_stand_fw/user/system_ch32v20x.h @@ -0,0 +1,32 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : system_ch32v20x.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : CH32V20x Device Peripheral Access Layer System Header File. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __SYSTEM_ch32v20x_H +#define __SYSTEM_ch32v20x_H + +#ifdef __cplusplus + extern "C" { +#endif + +extern uint32_t SystemCoreClock; /* System Clock Frequency (Core Clock) */ + +/* System_Exported_Functions */ +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); + +#ifdef __cplusplus +} +#endif + +#endif /*__CH32V20x_SYSTEM_H */ + + +