969 lines
37 KiB
C
969 lines
37 KiB
C
|
/**
|
||
|
******************************************************************************
|
||
|
* @file py32f0xx_ll_system.h
|
||
|
* @author MCU Application Team
|
||
|
* @brief Header file of SYSTEM LL module.
|
||
|
******************************************************************************
|
||
|
* @attention
|
||
|
*
|
||
|
* <h2><center>© Copyright (c) Puya Semiconductor Co.
|
||
|
* All rights reserved.</center></h2>
|
||
|
*
|
||
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||
|
* All rights reserved.</center></h2>
|
||
|
*
|
||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||
|
* the "License"; You may not use this file except in compliance with the
|
||
|
* License. You may obtain a copy of the License at:
|
||
|
* opensource.org/licenses/BSD-3-Clause
|
||
|
*
|
||
|
******************************************************************************
|
||
|
*/
|
||
|
|
||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||
|
#ifndef PY32F0XX_LL_SYSTEM_H
|
||
|
#define PY32F0XX_LL_SYSTEM_H
|
||
|
|
||
|
#ifdef __cplusplus
|
||
|
extern "C" {
|
||
|
#endif
|
||
|
|
||
|
/* Includes ------------------------------------------------------------------*/
|
||
|
#include "py32f0xx.h"
|
||
|
|
||
|
/** @addtogroup PY32F0XX_LL_Driver
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU)
|
||
|
|
||
|
/** @defgroup SYSTEM_LL SYSTEM
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
/* Private types -------------------------------------------------------------*/
|
||
|
/* Private variables ---------------------------------------------------------*/
|
||
|
|
||
|
/* Private constants ---------------------------------------------------------*/
|
||
|
/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/* Private macros ------------------------------------------------------------*/
|
||
|
|
||
|
/* Exported types ------------------------------------------------------------*/
|
||
|
/* Exported constants --------------------------------------------------------*/
|
||
|
/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP
|
||
|
* @{
|
||
|
*/
|
||
|
#define LL_SYSCFG_REMAP_FLASH 0x00000000U /*!< Main Flash memory mapped at 0x00000000 */
|
||
|
#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */
|
||
|
#define LL_SYSCFG_REMAP_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x00000000 */
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/** @defgroup SYSTEM_LL_EC_I2C_ANF I2C ANALOG FILTER ENABLE CONTORL
|
||
|
* @{
|
||
|
*/
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PA2_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PA2 SYSCFG_CFGR1_I2C_PA2_ANF
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PA3_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PA3 SYSCFG_CFGR1_I2C_PA3_ANF
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PA7_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PA7 SYSCFG_CFGR1_I2C_PA7_ANF
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PA8_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PA8 SYSCFG_CFGR1_I2C_PA8_ANF
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PA9_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PA9 SYSCFG_CFGR1_I2C_PA9_ANF
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PA10_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PA10 SYSCFG_CFGR1_I2C_PA10_ANF
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PA11_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PA11 SYSCFG_CFGR1_I2C_PA11_ANF
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PA12_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PA12 SYSCFG_CFGR1_I2C_PA12_ANF
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PB6_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PB6 SYSCFG_CFGR1_I2C_PB6_ANF
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PB7_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PB7 SYSCFG_CFGR1_I2C_PB7_ANF
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PB8_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PB8 SYSCFG_CFGR1_I2C_PB8_ANF
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PF0_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PF0 SYSCFG_CFGR1_I2C_PF0_ANF
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR1_I2C_PF1_ANF)
|
||
|
#define LL_SYSCFG_I2C_ANF_PF1 SYSCFG_CFGR1_I2C_PF1_ANF
|
||
|
#endif
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/** @defgroup SYSTEM_LL_EC_TIMBREAK TIMER BREAK INPUT
|
||
|
* @{
|
||
|
*/
|
||
|
#if defined(SYSCFG_CFGR2_LOCKUP_LOCK)
|
||
|
#define LL_SYSCFG_TIMBREAK_LOCKUP_TO_ALL SYSCFG_CFGR2_LOCKUP_LOCK
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR2_PVD_LOCK)
|
||
|
#define LL_SYSCFG_TIMBREAK_PVD_TO_ALL SYSCFG_CFGR2_PVD_LOCK
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR2_COMP1_BRK_TIM1)
|
||
|
#define LL_SYSCFG_TIMBREAK_COMP1_TO_TIM1 SYSCFG_CFGR2_COMP1_BRK_TIM1
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR2_COMP2_BRK_TIM1)
|
||
|
#define LL_SYSCFG_TIMBREAK_COMP2_TO_TIM1 SYSCFG_CFGR2_COMP2_BRK_TIM1
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR2_COMP1_BRK_TIM16)
|
||
|
#define LL_SYSCFG_TIMBREAK_COMP1_TO_TIM16 SYSCFG_CFGR2_COMP1_BRK_TIM16
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR2_COMP2_BRK_TIM16)
|
||
|
#define LL_SYSCFG_TIMBREAK_COMP2_TO_TIM16 SYSCFG_CFGR2_COMP2_BRK_TIM16
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR2_COMP1_BRK_TIM17)
|
||
|
#define LL_SYSCFG_TIMBREAK_COMP1_TO_TIM17 SYSCFG_CFGR2_COMP1_BRK_TIM17
|
||
|
#endif
|
||
|
#if defined(SYSCFG_CFGR2_COMP2_BRK_TIM17)
|
||
|
#define LL_SYSCFG_TIMBREAK_COMP2_TO_TIM17 SYSCFG_CFGR2_COMP2_BRK_TIM17
|
||
|
#endif
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/** @defgroup SYSTEM_LL_EC_ETR_SRC ETR SOURCE
|
||
|
*/
|
||
|
#define LL_SYSCFG_ETR_SRC_TIM1_GPIO 0x00000000U
|
||
|
#if defined(COMP1)
|
||
|
#define LL_SYSCFG_ETR_SRC_TIM1_COMP1 SYSCFG_CFGR2_ETR_SRC_TIM1_0
|
||
|
#endif
|
||
|
#if defined(COMP2)
|
||
|
#define LL_SYSCFG_ETR_SRC_TIM1_COMP2 SYSCFG_CFGR2_ETR_SRC_TIM1_1
|
||
|
#endif
|
||
|
#define LL_SYSCFG_ETR_SRC_TIM1_ADC (SYSCFG_CFGR2_ETR_SRC_TIM1_1 | SYSCFG_CFGR2_ETR_SRC_TIM1_0)
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
#if (defined(DMA) || defined(DMA1))
|
||
|
/** @defgroup SYSTEM_LL_EC_DMA_MAP DMA MAP
|
||
|
*/
|
||
|
#define LL_SYSCFG_DMA_MAP_ADC 0x00000000U
|
||
|
#define LL_SYSCFG_DMA_MAP_SPI1_TX SYSCFG_CFGR3_DMA1_MAP_0
|
||
|
#define LL_SYSCFG_DMA_MAP_SPI1_RX SYSCFG_CFGR3_DMA1_MAP_1
|
||
|
#define LL_SYSCFG_DMA_MAP_SPI2_TX (SYSCFG_CFGR3_DMA1_MAP_1 | SYSCFG_CFGR3_DMA1_MAP_0)
|
||
|
#define LL_SYSCFG_DMA_MAP_SPI2_RX SYSCFG_CFGR3_DMA1_MAP_2
|
||
|
#define LL_SYSCFG_DMA_MAP_USART1_TX (SYSCFG_CFGR3_DMA1_MAP_2 | SYSCFG_CFGR3_DMA1_MAP_0)
|
||
|
#define LL_SYSCFG_DMA_MAP_USART1_RX (SYSCFG_CFGR3_DMA1_MAP_2 | SYSCFG_CFGR3_DMA1_MAP_1)
|
||
|
#define LL_SYSCFG_DMA_MAP_USART2_TX (SYSCFG_CFGR3_DMA1_MAP_2 | SYSCFG_CFGR3_DMA1_MAP_1 | SYSCFG_CFGR3_DMA1_MAP_0)
|
||
|
#define LL_SYSCFG_DMA_MAP_USART2_RX SYSCFG_CFGR3_DMA1_MAP_3
|
||
|
#define LL_SYSCFG_DMA_MAP_I2C_TX (SYSCFG_CFGR3_DMA1_MAP_3 | SYSCFG_CFGR3_DMA1_MAP_0)
|
||
|
#define LL_SYSCFG_DMA_MAP_I2C_RX (SYSCFG_CFGR3_DMA1_MAP_3 | SYSCFG_CFGR3_DMA1_MAP_1)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM1_CH1 (SYSCFG_CFGR3_DMA1_MAP_3 | SYSCFG_CFGR3_DMA1_MAP_1 | SYSCFG_CFGR3_DMA1_MAP_0)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM1_CH2 (SYSCFG_CFGR3_DMA1_MAP_3 | SYSCFG_CFGR3_DMA1_MAP_2)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM1_CH3 (SYSCFG_CFGR3_DMA1_MAP_3 | SYSCFG_CFGR3_DMA1_MAP_2 | SYSCFG_CFGR3_DMA1_MAP_0)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM1_CH4 (SYSCFG_CFGR3_DMA1_MAP_3 | SYSCFG_CFGR3_DMA1_MAP_2 | SYSCFG_CFGR3_DMA1_MAP_1)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM1_COM (SYSCFG_CFGR3_DMA1_MAP_3 | SYSCFG_CFGR3_DMA1_MAP_2 | SYSCFG_CFGR3_DMA1_MAP_1 | SYSCFG_CFGR3_DMA1_MAP_0)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM1_UP SYSCFG_CFGR3_DMA1_MAP_4
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM1_TRIG (SYSCFG_CFGR3_DMA1_MAP_4 | SYSCFG_CFGR3_DMA1_MAP_0)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM3_CH1 (SYSCFG_CFGR3_DMA1_MAP_4 | SYSCFG_CFGR3_DMA1_MAP_1)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM3_CH3 (SYSCFG_CFGR3_DMA1_MAP_4 | SYSCFG_CFGR3_DMA1_MAP_1 | SYSCFG_CFGR3_DMA1_MAP_0)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM3_CH4 (SYSCFG_CFGR3_DMA1_MAP_4 | SYSCFG_CFGR3_DMA1_MAP_2)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM3_TRG (SYSCFG_CFGR3_DMA1_MAP_4 | SYSCFG_CFGR3_DMA1_MAP_2 | SYSCFG_CFGR3_DMA1_MAP_0)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM3_UP (SYSCFG_CFGR3_DMA1_MAP_4 | SYSCFG_CFGR3_DMA1_MAP_2 | SYSCFG_CFGR3_DMA1_MAP_1)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM16_CH1 (SYSCFG_CFGR3_DMA1_MAP_4 | SYSCFG_CFGR3_DMA1_MAP_3)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM16_UP (SYSCFG_CFGR3_DMA1_MAP_4 | SYSCFG_CFGR3_DMA1_MAP_3 | SYSCFG_CFGR3_DMA1_MAP_0)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM17_CH1 (SYSCFG_CFGR3_DMA1_MAP_4 | SYSCFG_CFGR3_DMA1_MAP_3 | SYSCFG_CFGR3_DMA1_MAP_1)
|
||
|
#define LL_SYSCFG_DMA_MAP_TIM17_UP (SYSCFG_CFGR3_DMA1_MAP_4 | SYSCFG_CFGR3_DMA1_MAP_3 | SYSCFG_CFGR3_DMA1_MAP_1 | SYSCFG_CFGR3_DMA1_MAP_0)
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/** @defgroup SYSTEM_LL_EC_DMA_ACKLVL DMA SPEED ENABLE
|
||
|
*/
|
||
|
#define LL_SYSCFG_DMA_ACKLVL_NORM 0x00000000U
|
||
|
#define LL_SYSCFG_DMA_ACKLVL_FAST SYSCFG_CFGR3_DMA1_ACKLVL
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/** @defgroup SYSTEM_LL_EC_DMA_CHNNEL_SHIFT DMA CHNNEL SHIFT ADDRESS
|
||
|
*/
|
||
|
#define LL_SYSCFG_DMA_CH2_SHIFT (8U)
|
||
|
#define LL_SYSCFG_DMA_CH3_SHIFT (16U)
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
#endif
|
||
|
|
||
|
/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY
|
||
|
* @{
|
||
|
*/
|
||
|
#define LL_FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero Latency cycle */
|
||
|
#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY /*!< FLASH One Latency cycle */
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
|
||
|
/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP
|
||
|
* @{
|
||
|
*/
|
||
|
#if defined(DBGMCU_APB_FZ1_DBG_TIM3_STOP)
|
||
|
#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB_FZ1_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */
|
||
|
#endif
|
||
|
#if defined(DBGMCU_APB_FZ1_DBG_RTC_STOP)
|
||
|
#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB_FZ1_DBG_RTC_STOP /*!< RTC Calendar frozen when core is halted */
|
||
|
#endif
|
||
|
#if defined(DBGMCU_APB_FZ1_DBG_WWDG_STOP)
|
||
|
#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB_FZ1_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */
|
||
|
#endif
|
||
|
#if defined(DBGMCU_APB_FZ1_DBG_IWDG_STOP)
|
||
|
#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB_FZ1_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */
|
||
|
#endif
|
||
|
#if defined(DBGMCU_APB_FZ1_DBG_LPTIM_STOP)
|
||
|
#define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP DBGMCU_APB_FZ1_DBG_LPTIM_STOP /*!< LPTIM1 counter stopped when Core is halted */
|
||
|
#endif
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP
|
||
|
* @{
|
||
|
*/
|
||
|
#if defined(DBGMCU_APB_FZ2_DBG_TIM1_STOP)
|
||
|
#define LL_DBGMCU_APB1_GRP2_TIM1_STOP DBGMCU_APB_FZ2_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */
|
||
|
#endif
|
||
|
#if defined(DBGMCU_APB_FZ2_DBG_TIM14_STOP)
|
||
|
#define LL_DBGMCU_APB1_GRP2_TIM14_STOP DBGMCU_APB_FZ2_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */
|
||
|
#endif
|
||
|
#if defined(DBGMCU_APB_FZ2_DBG_TIM16_STOP)
|
||
|
#define LL_DBGMCU_APB1_GRP2_TIM16_STOP DBGMCU_APB_FZ2_DBG_TIM16_STOP /*!< TIM16 counter stopped when core is halted */
|
||
|
#endif
|
||
|
#if defined(DBGMCU_APB_FZ2_DBG_TIM17_STOP)
|
||
|
#define LL_DBGMCU_APB1_GRP2_TIM17_STOP DBGMCU_APB_FZ2_DBG_TIM17_STOP /*!< TIM17 counter stopped when core is halted */
|
||
|
#endif
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/* Exported macro ------------------------------------------------------------*/
|
||
|
|
||
|
/* Exported functions --------------------------------------------------------*/
|
||
|
/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
/**
|
||
|
* @brief Set memory mapping at address 0x00000000
|
||
|
* @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_SetRemapMemory
|
||
|
* @param Memory This parameter can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_REMAP_FLASH
|
||
|
* @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
|
||
|
* @arg @ref LL_SYSCFG_REMAP_SRAM
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory)
|
||
|
{
|
||
|
MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, Memory);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Get memory mapping at address 0x00000000
|
||
|
* @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_GetRemapMemory
|
||
|
* @retval Returned value can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_REMAP_FLASH
|
||
|
* @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
|
||
|
* @arg @ref LL_SYSCFG_REMAP_SRAM
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void)
|
||
|
{
|
||
|
return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE));
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Enable analog filtering of I2C related IO
|
||
|
* @note Depending on devices and packages, some IOs may not be available.
|
||
|
* Refer to device datasheet for IOs availability.
|
||
|
* @param I2CAnalogFilter This parameter can be a combination of the following values:
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA2
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA3
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA7
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA8
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA9
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA10
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA11
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA12
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PB6
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PB7
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PB8
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PF0
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PF1
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_SYSCFG_EnableI2CAnalogFilter(uint32_t I2CAnalogFilter)
|
||
|
{
|
||
|
SET_BIT(SYSCFG->CFGR1, I2CAnalogFilter);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Disable analog filtering of I2C related IO
|
||
|
* @note Depending on devices and packages, some IOs may not be available.
|
||
|
* Refer to device datasheet for IOs availability.
|
||
|
* @param I2CAnalogFilter This parameter can be a combination of the following values:
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA2
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA3
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA7
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA8
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA9
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA10
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA11
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA12
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PB6
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PB7
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PB8
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PF0
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PF1
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_SYSCFG_DisableI2CAnalogFilter(uint32_t I2CAnalogFilter)
|
||
|
{
|
||
|
CLEAR_BIT(SYSCFG->CFGR1, I2CAnalogFilter);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Indicate if enable analog filtering of I2C related IO
|
||
|
* @note Depending on devices and packages, some IOs may not be available.
|
||
|
* Refer to device datasheet for IOs availability.
|
||
|
* @param I2CAnalogFilter This parameter can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA2
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA3
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA7
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA8
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA9
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA10
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA11
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PA12
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PB6
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PB7
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PB8
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PF0
|
||
|
* @arg @ref LL_SYSCFG_I2C_ANF_PF1
|
||
|
* @retval State of bit (1 or 0).
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledI2CAnalogFilter(uint32_t I2CAnalogFilter)
|
||
|
{
|
||
|
return ((READ_BIT(SYSCFG->CFGR1, I2CAnalogFilter) == (I2CAnalogFilter)) ? 1UL : 0UL);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Enables COMPx as TIMx break input
|
||
|
* @note Depending on devices and packages, some Peripherals may not be available.
|
||
|
* Refer to device datasheet for Peripherals availability.
|
||
|
* @param TIMBreakInputs This parameter can be a combination of the following values:
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP_TO_ALL
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_PVD_TO_ALL
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP1_TO_TIM1
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP2_TO_TIM1
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP1_TO_TIM16
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP2_TO_TIM16
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP1_TO_TIM17
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP2_TO_TIM17
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_SYSCFG_EnableTIMBreakInputs(uint32_t TIMBreakInputs)
|
||
|
{
|
||
|
SET_BIT(SYSCFG->CFGR2, TIMBreakInputs);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Disables COMPx as TIMx break input
|
||
|
* @note Depending on devices and packages, some Peripherals may not be available.
|
||
|
* Refer to device datasheet for Peripherals availability.
|
||
|
* @param TIMBreakInputs This parameter can be a combination of the following values:
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP_TO_ALL
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_PVD_TO_ALL
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP1_TO_TIM1
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP2_TO_TIM1
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP1_TO_TIM16
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP2_TO_TIM16
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP1_TO_TIM17
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP2_TO_TIM17
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_SYSCFG_DisableTIMBreakInputs(uint32_t TIMBreakInputs)
|
||
|
{
|
||
|
CLEAR_BIT(SYSCFG->CFGR2, TIMBreakInputs);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Indicate if COMPx as TIMx break input
|
||
|
* @note Depending on devices and packages, some Peripherals may not be available.
|
||
|
* Refer to device datasheet for Peripherals availability.
|
||
|
* @param TIMBreakInputs This parameter can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP_TO_ALL
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_PVD_TO_ALL
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP1_TO_TIM1
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP2_TO_TIM1
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP1_TO_TIM16
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP2_TO_TIM16
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP1_TO_TIM17
|
||
|
* @arg @ref LL_SYSCFG_TIMBREAK_COMP2_TO_TIM17
|
||
|
* @retval State of bit (1 or 0).
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledTIMBreakInputs(uint32_t TIMBreakInputs)
|
||
|
{
|
||
|
return ((READ_BIT(SYSCFG->CFGR2, TIMBreakInputs) == (TIMBreakInputs)) ? 1UL : 0UL);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Set the TIMER1 ETR input source
|
||
|
* @note Depending on devices and packages, some Peripherals may not be available.
|
||
|
* Refer to device datasheet for Peripherals availability.
|
||
|
* @param source This parameter can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_ETR_SRC_TIM1_GPIO
|
||
|
* @arg @ref LL_SYSCFG_ETR_SRC_TIM1_COMP1
|
||
|
* @arg @ref LL_SYSCFG_ETR_SRC_TIM1_COMP2
|
||
|
* @arg @ref LL_SYSCFG_ETR_SRC_TIM1_ADC
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_SYSCFG_SetTIM1ETRSource(uint32_t source)
|
||
|
{
|
||
|
MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_ETR_SRC_TIM1, source);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Get the TIMER1 ETR input source
|
||
|
* @note Depending on devices and packages, some Peripherals may not be available.
|
||
|
* Refer to device datasheet for Peripherals availability.
|
||
|
* @retval Returned value can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_ETR_SRC_TIM1_GPIO
|
||
|
* @arg @ref LL_SYSCFG_ETR_SRC_TIM1_COMP1
|
||
|
* @arg @ref LL_SYSCFG_ETR_SRC_TIM1_COMP2
|
||
|
* @arg @ref LL_SYSCFG_ETR_SRC_TIM1_ADC
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_SYSCFG_GetTIM1ETRSource(void)
|
||
|
{
|
||
|
return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_ETR_SRC_TIM1));
|
||
|
}
|
||
|
|
||
|
#if (defined(DMA) || defined(DMA1))
|
||
|
/**
|
||
|
* @brief Set the request image for DMA channel 1
|
||
|
* @param Requset This parameter can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_ADC
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI1_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI1_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI2_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI2_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART1_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART1_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART2_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART2_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_I2C_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_I2C_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH2
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH3
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH4
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_COM
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_TRIG
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH3
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH4
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_TRG
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM16_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM16_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM17_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM17_UP
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_SYSCFG_SetDMARemap_CH1(uint32_t Requset)
|
||
|
{
|
||
|
MODIFY_REG(SYSCFG->CFGR3, SYSCFG_CFGR3_DMA1_MAP_Msk, Requset);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Gett the request image for DMA channel 1
|
||
|
* @retval Returned value can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_ADC
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI1_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI1_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI2_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI2_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART1_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART1_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART2_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART2_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_I2C_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_I2C_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH2
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH3
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH4
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_COM
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_TRIG
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH3
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH4
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_TRG
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM16_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM16_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM17_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM17_UP
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_SYSCFG_GetDMARemap_CH1(void)
|
||
|
{
|
||
|
return (uint32_t)(READ_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_DMA1_MAP_Msk));
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Set the response speed of DMA channel 1
|
||
|
* @param Requset This parameter can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_DMA_ACKLVL_NORM
|
||
|
* @arg @ref LL_SYSCFG_DMA_ACKLVL_FAST
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_SYSCFG_SetDMAResponseSpeed_CH1(uint32_t ResponseSpeed)
|
||
|
{
|
||
|
MODIFY_REG(SYSCFG->CFGR3, SYSCFG_CFGR3_DMA1_ACKLVL, ResponseSpeed);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Get the response speed of DMA channel 1
|
||
|
* @retval Returned value can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_DMA_ACKLVL_NORM
|
||
|
* @arg @ref LL_SYSCFG_DMA_ACKLVL_FAST
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_SYSCFG_GetDMAResponseSpeed_CH1(void)
|
||
|
{
|
||
|
return (uint32_t)(READ_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_DMA1_ACKLVL));
|
||
|
}
|
||
|
|
||
|
|
||
|
/**
|
||
|
* @brief Set the request image for DMA channel 2
|
||
|
* @param Requset This parameter can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_ADC
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI1_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI1_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI2_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI2_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART1_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART1_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART2_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART2_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_I2C_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_I2C_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH2
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH3
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH4
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_COM
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_TRIG
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH3
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH4
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_TRG
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM16_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM16_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM17_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM17_UP
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_SYSCFG_SetDMARemap_CH2(uint32_t Requset)
|
||
|
{
|
||
|
MODIFY_REG(SYSCFG->CFGR3, SYSCFG_CFGR3_DMA2_MAP_Msk, (Requset << LL_SYSCFG_DMA_CH2_SHIFT));
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Gett the request image for DMA channel 2
|
||
|
* @retval Returned value can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_ADC
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI1_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI1_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI2_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI2_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART1_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART1_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART2_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART2_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_I2C_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_I2C_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH2
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH3
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH4
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_COM
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_TRIG
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH3
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH4
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_TRG
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM16_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM16_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM17_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM17_UP
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_SYSCFG_GetDMARemap_CH2(void)
|
||
|
{
|
||
|
return (uint32_t)((READ_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_DMA2_MAP_Msk)) >> LL_SYSCFG_DMA_CH2_SHIFT);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Set the response speed of DMA channel 2
|
||
|
* @param Requset This parameter can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_DMA_ACKLVL_NORM
|
||
|
* @arg @ref LL_SYSCFG_DMA_ACKLVL_FAST
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_SYSCFG_SetDMAResponseSpeed_CH2(uint32_t ResponseSpeed)
|
||
|
{
|
||
|
MODIFY_REG(SYSCFG->CFGR3, SYSCFG_CFGR3_DMA2_ACKLVL, (ResponseSpeed << LL_SYSCFG_DMA_CH2_SHIFT));
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Get the response speed of DMA channel 2
|
||
|
* @retval Returned value can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_DMA_ACKLVL_NORM
|
||
|
* @arg @ref LL_SYSCFG_DMA_ACKLVL_FAST
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_SYSCFG_GetDMAResponseSpeed_CH2(void)
|
||
|
{
|
||
|
return (uint32_t)((READ_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_DMA2_ACKLVL)) >> LL_SYSCFG_DMA_CH2_SHIFT);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Set the request image for DMA channel 3
|
||
|
* @param Requset This parameter can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_ADC
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI1_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI1_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI2_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI2_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART1_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART1_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART2_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART2_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_I2C_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_I2C_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH2
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH3
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH4
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_COM
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_TRIG
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH3
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH4
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_TRG
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM16_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM16_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM17_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM17_UP
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_SYSCFG_SetDMARemap_CH3(uint32_t Requset)
|
||
|
{
|
||
|
MODIFY_REG(SYSCFG->CFGR3, SYSCFG_CFGR3_DMA3_MAP_Msk, (Requset << LL_SYSCFG_DMA_CH3_SHIFT));
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Gett the request image for DMA channel 3
|
||
|
* @retval Returned value can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_ADC
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI1_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI1_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI2_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_SPI2_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART1_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART1_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART2_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_USART2_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_I2C_TX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_I2C_RX
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH2
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH3
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_CH4
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_COM
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM1_TRIG
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH3
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_CH4
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_TRG
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM3_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM16_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM16_UP
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM17_CH1
|
||
|
* @arg @ref LL_SYSCFG_DMA_MAP_TIM17_UP
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_SYSCFG_GetDMARemap_CH3(void)
|
||
|
{
|
||
|
return (uint32_t)((READ_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_DMA3_MAP_Msk)) >> LL_SYSCFG_DMA_CH3_SHIFT);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Set the response speed of DMA channel 3
|
||
|
* @param Requset This parameter can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_DMA_ACKLVL_NORM
|
||
|
* @arg @ref LL_SYSCFG_DMA_ACKLVL_FAST
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_SYSCFG_SetDMAResponseSpeed_CH3(uint32_t ResponseSpeed)
|
||
|
{
|
||
|
MODIFY_REG(SYSCFG->CFGR3, SYSCFG_CFGR3_DMA3_ACKLVL, (ResponseSpeed << LL_SYSCFG_DMA_CH3_SHIFT));
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Get the response speed of DMA channel 3
|
||
|
* @retval Returned value can be one of the following values:
|
||
|
* @arg @ref LL_SYSCFG_DMA_ACKLVL_NORM
|
||
|
* @arg @ref LL_SYSCFG_DMA_ACKLVL_FAST
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_SYSCFG_GetDMAResponseSpeed_CH3(void)
|
||
|
{
|
||
|
return (uint32_t)((READ_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_DMA3_ACKLVL)) >> LL_SYSCFG_DMA_CH3_SHIFT);
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/** @defgroup SYSTEM_LL_EF_FLASH FLASH
|
||
|
* @{
|
||
|
*/
|
||
|
|
||
|
/**
|
||
|
* @brief Set FLASH Latency
|
||
|
* @rmtoll FLASH_ACR FLASH_ACR_LATENCY LL_FLASH_SetLatency
|
||
|
* @param Latency This parameter can be one of the following values:
|
||
|
* @arg @ref LL_FLASH_LATENCY_0
|
||
|
* @arg @ref LL_FLASH_LATENCY_1
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
|
||
|
{
|
||
|
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Get FLASH Latency
|
||
|
* @rmtoll FLASH_ACR FLASH_ACR_LATENCY LL_FLASH_GetLatency
|
||
|
* @retval Returned value can be one of the following values:
|
||
|
* @arg @ref LL_FLASH_LATENCY_0
|
||
|
* @arg @ref LL_FLASH_LATENCY_1
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
|
||
|
{
|
||
|
return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
|
||
|
/**
|
||
|
* @brief Return the device identifier
|
||
|
* @retval Values between Min_Data=0x00 and Max_Data=0xFFF
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void)
|
||
|
{
|
||
|
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID));
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Return the device revision identifier
|
||
|
* @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
|
||
|
{
|
||
|
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos);
|
||
|
}
|
||
|
|
||
|
|
||
|
/**
|
||
|
* @brief Enable the Debug Module during STOP mode
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
|
||
|
{
|
||
|
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Disable the Debug Module during STOP mode
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
|
||
|
{
|
||
|
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Indicate if enable the Debug Module during STOP mode
|
||
|
* @retval State of bit (1 or 0).
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_DBGMCU_IsEnabledDBGStopMode(void)
|
||
|
{
|
||
|
return ((READ_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP) == (DBGMCU_CR_DBG_STOP)) ? 1UL : 0UL);
|
||
|
}
|
||
|
/**
|
||
|
* @brief Freeze APB1 peripherals (group1 peripherals)
|
||
|
* @note Depending on devices and packages, some Peripherals may not be available.
|
||
|
* Refer to device datasheet for Peripherals availability.
|
||
|
* @param Periphs This parameter can be a combination of the following values:
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs)
|
||
|
{
|
||
|
SET_BIT(DBGMCU->APBFZ1, Periphs);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Unfreeze APB1 peripherals (group1 peripherals)
|
||
|
* @note Depending on devices and packages, some Peripherals may not be available.
|
||
|
* Refer to device datasheet for Peripherals availability.
|
||
|
* @param Periphs This parameter can be a combination of the following values:
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs)
|
||
|
{
|
||
|
CLEAR_BIT(DBGMCU->APBFZ1, Periphs);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Indicate if Freeze APB1 peripherals (group1 peripherals)
|
||
|
* @note Depending on devices and packages, some Peripherals may not be available.
|
||
|
* Refer to device datasheet for Peripherals availability.
|
||
|
* @param Periphs This parameter can be one of the following values:
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
|
||
|
* @retval State of bit (1 or 0).
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_DBGMCU_APB1_GRP1_IsFreezePeriph(uint32_t Periphs)
|
||
|
{
|
||
|
return ((READ_BIT(DBGMCU->APBFZ1, Periphs) == (Periphs)) ? 1UL : 0UL);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Freeze APB1 peripherals(group2 peripherals)
|
||
|
* @note Depending on devices and packages, some Peripherals may not be available.
|
||
|
* Refer to device datasheet for Peripherals availability.
|
||
|
* @param Periphs This parameter can be a combination of the following values:
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP2_TIM1_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP2_TIM14_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP2_TIM16_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP2_TIM17_STOP
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_FreezePeriph(uint32_t Periphs)
|
||
|
{
|
||
|
SET_BIT(DBGMCU->APBFZ2, Periphs);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Unfreeze APB1 peripherals(group2 peripherals)
|
||
|
* @note Depending on devices and packages, some Peripherals may not be available.
|
||
|
* Refer to device datasheet for Peripherals availability.
|
||
|
* @param Periphs This parameter can be a combination of the following values:
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP2_TIM1_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP2_TIM14_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP2_TIM16_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP2_TIM17_STOP
|
||
|
* @retval None
|
||
|
*/
|
||
|
__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_UnFreezePeriph(uint32_t Periphs)
|
||
|
{
|
||
|
CLEAR_BIT(DBGMCU->APBFZ2, Periphs);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief Indicate if Freeze APB1 peripherals (group2 peripherals)
|
||
|
* @note Depending on devices and packages, some Peripherals may not be available.
|
||
|
* Refer to device datasheet for Peripherals availability.
|
||
|
* @param Periphs This parameter can be one of the following values:
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP2_TIM1_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP2_TIM14_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP2_TIM16_STOP
|
||
|
* @arg @ref LL_DBGMCU_APB1_GRP2_TIM17_STOP
|
||
|
* @retval State of bit (1 or 0).
|
||
|
*/
|
||
|
__STATIC_INLINE uint32_t LL_DBGMCU_APB1_GRP2_IsFreezePeriph(uint32_t Periphs)
|
||
|
{
|
||
|
return ((READ_BIT(DBGMCU->APBFZ2, Periphs) == (Periphs)) ? 1UL : 0UL);
|
||
|
}
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */
|
||
|
|
||
|
/**
|
||
|
* @}
|
||
|
*/
|
||
|
|
||
|
#ifdef __cplusplus
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
#endif /* PY32F0XX_LL_SYSTEM_H */
|
||
|
|
||
|
/************************ (C) COPYRIGHT Puya *****END OF FILE****/
|