sc7-testo-firmware/include/testo.h

86 lines
1.9 KiB
C
Raw Normal View History

/*
* testo.h: test-o hardware configuration
*
* file creation: 20231015 0021
*/
#ifndef _INC_TESTO_H
#define _INC_TESTO_H
#include "py32f0xx_conf.h"
#define CONF_SET1_PORT GPIOA
#define CONF_SET1_PIN 0 // analog-input
#define CONF_SET1_AN ADC_CHSELR_CHSEL0
#define VREF_IN_PORT GPIOA
#define VREF_IN_PIN 0 // anlog-input
#define VREF_IN_AN ADC_CHSELR_CHSEL0
#define PROBE_PORT GPIOA
#define PROBE_PIN 1 // analog-input
#define PROBE_AN ADC_CHSELR_CHSEL1
#define I2C_PORT GPIOA
#define I2C_DEV I2C1
#define I2C_AF LL_GPIO_AF12_I2C
#define I2C_IRQn I2C1_IRQn
#define I2C_SDA_PIN 2 // alt-func
#define I2C_SCL_PIN 3 // alt-func
#define RGB_PORT GPIOA
#define RGB_B_PIN 4 // alt-func
#define RGB_G_PIN 5 // alt-func
#define RGB_R_PIN 6 // alt-func
#define TIM_RGB TIM3
#define TIM_RGB_B_CH LL_TIM_CHANNEL_CH3
#define TIM_RGB_G_CH LL_TIM_CHANNEL_CH2
#define TIM_RGB_R_CH LL_TIM_CHANNEL_CH1
#define PWM_RGB_B TIM_RGB->CCR3
#define PWM_RGB_G TIM_RGB->CCR2
#define PWM_RGB_R TIM_RGB->CCR1
#define CONF_MODE_PORT GPIOA
#define CONF_MODE_PIN 7 // analog-input
#define CONF_MODE_AN ADC_CHSELR_CHSEL7
#define RGBSEL0_PORT GPIOA
#define RGBSEL0_PIN 12 // output, default high
#define UART_PORT GPIOA
#define UART_DEV USART1
#define UART_IRQN USART1_IRQn
#define UART_RX_PIN 13 // alt-func (if used)
#define UART_RX_AF LL_GPIO_AF8_USART1
#define UART_TX_PIN 14 // alt-func (if used)
#define UART_TX_AF LL_GPIO_AF1_USART1
#define CONF_SET0_PORT GPIOB
#define CONF_SET0_PIN 0 // analog-input
#define CONF_SET0_AN ADC_CHSELR_CHSEL8
#define RGBSEL1_PORT GPIOB
#define RGBSEL1_PIN 1 // output, default high
#define PROBESEL_PORT GPIOF
#define PROBESEL_PIN 2 // output, default high
#define ADC_SET0 3
#define ADC_SET1 0
#define ADC_SET_MODE 2
#define ADC_PROBE 1
#define ADC_VREF_INT 5
#define ADC_VREF_EXT 0
#define ADC_THERM 4
#endif /* _INC_TESTO_H */