bootloader now functions

several issues with the bootloader, from gpio config, UART baud, etc.

bootloader now does the following:
- enters bootloader mode upon holding BTN2 at power-up
- flashes LED4 rapidly to indicate in bootloader mode
- operates WCH ISP bootloader at 115200 baud on the UART pins on GAT header

firmware/ch32v003_bootloader/.cproject

@@ -147,5 +147,5 @@
 	</storageModule>
 	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
 	<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
-	<storageModule moduleId="refreshScope"/>
+	
 </cproject>

firmware/ch32v003_bootloader/.settings/language.settings.xml

@@ -5,7 +5,7 @@
 			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
 			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
 			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
-			<provider class="org.eclipse.cdt.managedbuilder.language.settings.providers.GCCBuiltinSpecsDetector" console="false" env-hash="-1665227271106920866" id="ilg.gnumcueclipse.managedbuild.cross.riscv.GCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT RISC-V Cross GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} ${cross_toolchain_flags} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
+			<provider class="org.eclipse.cdt.managedbuilder.language.settings.providers.GCCBuiltinSpecsDetector" console="false" env-hash="-90729660781185971" id="ilg.gnumcueclipse.managedbuild.cross.riscv.GCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT RISC-V Cross GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} ${cross_toolchain_flags} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
 				<language-scope id="org.eclipse.cdt.core.gcc"/>
 				<language-scope id="org.eclipse.cdt.core.g++"/>
 			</provider>

firmware/ch32v003_bootloader/.settings/org.eclipse.core.resources.prefs

@@ -3,12 +3,21 @@ encoding//core/core_riscv.h=GBK
 encoding//ld/ch32v003_bl.ld=GBK
 encoding//periph/inc/ch32v00x.h=GBK
 encoding//periph/inc/ch32v00x_gpio.h=GBK
+encoding//periph/inc/ch32v00x_rcc.h=GBK
+encoding//periph/inc/ch32v00x_tim.h=GBK
 encoding//periph/inc/ch32v00x_usart.h=GBK
 encoding//periph/src/ch32v00x_adc.c=GBK
+encoding//periph/src/ch32v00x_flash.c=GBK
 encoding//periph/src/ch32v00x_gpio.c=GBK
 encoding//periph/src/ch32v00x_pwr.c=GBK
 encoding//periph/src/ch32v00x_rcc.c=GBK
+encoding//periph/src/ch32v00x_tim.c=GBK
 encoding//periph/src/ch32v00x_usart.c=GBK
+encoding//startup/startup_ch32v00x.S=GBK
+encoding//user/ch32v00x_conf.h=GBK
+encoding//user/ch32v00x_it.c=GBK
+encoding//user/ch32v00x_it.h=GBK
+encoding//user/flash.c=GBK
 encoding//user/iap.c=GBK
 encoding//user/iap.h=GBK
 encoding//user/main.c=GBK

firmware/ch32v003_bootloader/user/iap.c

@@ -38,17 +38,18 @@ u8 EP2_Rx_Buffer[USBD_DATA_SIZE];
 
 void USART1_CFG(u32 baudrate)
 {
-
+    uint32_t w;
     // configure GPIO pins for USART mode
-    GPIOD->CFGLR   = 0x48B44444;                // Set GPIOD Mode, Speed
+    GPIOD->BCR     = (((uint32_t)0x01) << 6);   // pull down RX line
-    GPIOD->BCR     = (((uint32_t)0x01) << 6);
+    w              = GPIOD->CFGLR & ~(0x0ff00000);
+    GPIOD->CFGLR   = w | 0x08a00000;            // Set GPIOD Mode, Speed
 
     // configure USART
-    USART1->CTLR2 |= USART_StopBits_1;
+    USART1->CTLR2  = USART_StopBits_1;
     USART1->CTLR1  = USART_Parity_No | USART_Mode_Rx | USART_Mode_Tx; // Set USART mode, Parity
-    USART1->CTLR3 |= USART_HardwareFlowControl_None;
+    USART1->CTLR3  = USART_HardwareFlowControl_None;
 
-    USART1->BRR    = (8 << 4) | 11;             // 115200; use 0x34 for 460800
+    USART1->BRR    = (13 << 4);                 // 115200; was originally 0x34 for 460800 supposedly?
 
     USART1->CTLR1 |= ((uint16_t)0x2000);        // enable USART
 }
@@ -151,27 +152,6 @@ void GPIO_Cfg_init(void)
 
 }
 
-/*********************************************************************
- * @fn      PC0_Check
- *
- * @brief   Check PC0 state
- *
- * @return  1 - IAP
- *          0 - APP
- */
-u8 btn2_pushed(void)
-{
-    // configure GPIOC
-    GPIOC->BCR     = GPIO_Pin_4;            // configure pull-down
-    GPIOC->CFGLR  &= ~(0x04 << (4 * 4));    // clear PC4 config
-    GPIOC->CFGLR  |=   0x08 << (4 * 4);     // configure PC4 as pullup/down input
-    // GPIOC->BSHR   = ((uint32_t)0x01);
-
-    // is button pushed (active high)?
-    return (GPIOC->INDR & GPIO_Pin_4); // ^ GPIO_Pin_4;
-}
-
-
 /*********************************************************************
  * @fn      UART3_SendMultiyData
  *
@@ -218,8 +198,10 @@ void UART1_SendData(u8 data)
  */
 u8 Uart1_Rx(void)
 {
-    while( USART_GetFlagStatus(USART1, USART_FLAG_RXNE) == RESET);
+    // todo: rewrite the whole receive routine to not depend
-    return USART_ReceiveData( USART1);
+    // on this easily breakable code.
+    while(USART_GetFlagStatus(USART1, USART_FLAG_RXNE) == RESET);
+    return USART_ReceiveData(USART1);
 }
 
 /*********************************************************************

firmware/ch32v003_bootloader/user/iap.h

@@ -52,7 +52,7 @@ void GPIO_Cfg_init(void);
 void USART1_CFG(u32 baudrate);
 void UART_Rx_Deal(void);
 
-u8 btn2_pushed(void);
+
 
 #endif
 

firmware/ch32v003_bootloader/user/main.c

@@ -25,6 +25,8 @@
 #include "string.h"
 #include "iap.h"
 
+#define RSTSCKR_RMVF_Set           ((uint32_t)0x01000000)       // from ch32v00x_rcc.c
+
 /*********************************************************************
  * @fn      IAP_2_APP
  *
@@ -34,11 +36,46 @@
  */
 void IAP_2_APP(void)
 {
-    RCC_ClearFlag();
+    RCC->RSTSCKR |= RSTSCKR_RMVF_Set;   // RCC_ClearFlag();
+
     SystemReset_StartMode(Start_Mode_USER);
+
+    //TIM1->BDTR = 0;         // disable PWM outputs
+    //TIM1->CCER = 0;         // disable PWM selects
+    //TIM1->CHCTLR1 = 0;      // disable PWM mappings
+    //TIM1->CTLR1 = 0;        // disable TIM1
+
+    //RCC->APB2PCENR = 0;     // disable peripheral clocks
+
     NVIC_SystemReset();
 }
 
+static inline void bootloader_led_flash()
+{
+    uint32_t w;
+
+    // configure bootloader LED pins
+    GPIOA->BCR    = GPIO_Pin_2;            // LSENS_K
+    GPIOD->BSHR   = GPIO_Pin_0;            // LSENS_A
+
+    w = GPIOA->CFGLR & ~(0x0f << (4 * 2)); // clear PA2 config
+    GPIOA->CFGLR = w | 0x0a << (4 * 2);    // and configure as AF_PP output
+
+    w = GPIOD->CFGLR & ~(0x0f << (4 * 0)); // clear PD0 config
+    GPIOD->CFGLR = w | 0x02 << (4 * 0);    // and configure as PP output
+
+    TIM1->ATRLR   = 40 - 1;       // period
+    TIM1->PSC     = 65535;        // prescaler
+    TIM1->SWEVGR  = TIM_PSCReloadMode_Immediate;
+
+    TIM1->CCER    = TIM_CC2NE;
+    TIM1->CH2CVR  = 30;
+    TIM1->CHCTLR1 = 0x60 << 8;  // output enabled, PWM mode 1
+
+    TIM1->BDTR    = TIM_MOE;      // enable PWM outputs
+    TIM1->CTLR1   = TIM_CKD_1 | TIM_ARPE | TIM_CEN;
+}
+
 /*********************************************************************
  * @fn      main
  *
@@ -48,15 +85,32 @@ void IAP_2_APP(void)
  */
 int main(void)
 {
-    // Enable GPIOD,USART1, GPIOC  clock
+    uint8_t w;
-    RCC->APB2PCENR |= (RCC_APB2Periph_GPIOD | RCC_APB2Periph_USART1|RCC_APB2Periph_GPIOC);
-    USART1_CFG(115200);
 
-    if(!btn2_pushed()) {
+    RCC->APB2PCENR = RCC_APB2Periph_GPIOC;
+
+    // configure GPIOC
+    GPIOC->BCR     = GPIO_Pin_4;            // configure pull-down
+    w = GPIOC->CFGLR & ~(0x0f << (4 * 4));  // clear PC4 config
+    GPIOC->CFGLR = w | 0x08 << (4 * 4);     // configure PC4 as input with PU/PD
+
+    // had some issues with spurious activation happening,
+    // so spin a little bit. seems to help?
+    while (TIM1->CNT) __asm("nop");
+
+    // is button NOT pushed (active high)?
+    if (!(GPIOC->INDR & GPIO_Pin_4)) {
         IAP_2_APP();
         while(1);
     }
 
+    RCC->APB2PCENR = (RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOC |
+                      RCC_APB2Periph_GPIOD | RCC_APB2Periph_TIM1  |
+                      RCC_APB2Periph_AFIO  | RCC_APB2Periph_USART1);
+
+    bootloader_led_flash();
+    USART1_CFG(115200);
+
     while(1) {
         if(USART_GetFlagStatus(USART1, USART_FLAG_RXNE) == RESET) {
             UART_Rx_Deal();