trueControl
/
dc32-retro-tech-addon
1
0
Fork 0
Code Issues Pull Requests Releases 3 Activity

buttons operate properly now 

what the buttons actually _do_ does not necessarily operate properly, except the cursor. that's been fixed
This commit is contained in:
true 2024-08-05 13:04:54 -07:00
parent 9d00b8daa1
commit 6785261d08
4 changed files with 49 additions and 39 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
firmware/retro_tech_fw/user/src/btn.c
View File

@ -19,15 +19,15 @@ void btn_init()
// configure GPIO
BTN_PORT->BSHR = (BTN1_PUPD << BTN1_PIN) | (BTN2_PUPD << BTN2_PIN);
BTN_PORT->CFGLR &= ~((0xff << (BTN1_PIN*4)) | ((0xff << (BTN2_PIN*4))));
BTN_PORT->CFGLR |= (0x80 << (BTN1_PIN*4)) | (0x80 << (BTN2_PIN*4));
BTN_PORT->CFGLR &= ~((0xf << (BTN1_PIN*4)) | ((0xf << (BTN2_PIN*4))));
BTN_PORT->CFGLR |= (0x8 << (BTN1_PIN*4)) | (0x8 << (BTN2_PIN*4));
// configure default setup
for (i = 0; i < BTN_COUNT; i++) {
btn[i]._mask = 0;
btn[i]._mask = BTN_RELEASE;
}
btn[0]._pintype = BTN1_PIN | 0x10;
btn[0]._pintype = BTN1_PIN | BTN_ACTIVE_LO;
btn[1]._pintype = BTN2_PIN;
}
@ -37,19 +37,28 @@ void btn_poll()
uint8_t r;
uint8_t ignore;
uint8_t pushed;
for (i = 0; i < BTN_COUNT; i++) {
pushed = 0;
ignore = btn[i]._mask & BTN_IGNORE;
r = BTN_PORT->INDR & (1 << (btn[i]._pintype & 0xf));
r = BTN_PORT->INDR & (1 << (btn[i]._pintype & BTN_PIN_MASK));
if ((!r && (btn[i]._pintype & 0x10)) || (r && !(btn[i]._pintype & 0x10))) {
// is pushed
if (btn[i]._count < BTN_DEBOUNCE) continue;
// active low type buttons
if (!r && (btn[i]._pintype & BTN_ACTIVE_LO)) pushed = 1;
// active high type buttons
if (r && !(btn[i]._pintype & BTN_ACTIVE_LO)) pushed = 1;
if (pushed) {
// hold counter
if (btn[i]._count < 0xffff) btn[i]._count++;
// pushed long ennough?
if (btn[i]._count < BTN_DEBOUNCE) continue;
// first push?
if (!btn[i]._mask & BTN_PUSH) {
if (!(btn[i]._mask & BTN_PUSH)) {
btn[i]._mask = BTN_PUSH;
if (btn[i].cb_push) {
btn[i].cb_push(i);
@ -59,7 +68,7 @@ void btn_poll()
// held to count limit
// if button is not repeatable, do not retrigger
if ((btn[i]._mask && BTN_HOLD) && !btn[i].repeat) continue;
if ((btn[i]._mask & BTN_HOLD) && !btn[i].repeat) continue;
btn[i]._mask |= BTN_HOLD;
// call callback only if not in ignore state
@ -69,11 +78,13 @@ void btn_poll()
}
// apply repeat rate to count
btn[i]._count -= btn[i].repeat;
if (btn[i].repeat > btn[i]._count) {
btn[i]._count = 0;
} else btn[i]._count -= btn[i].repeat;
}
} else {
// is not pushed
if (!btn[i]._mask & BTN_RELEASE) {
if (!(btn[i]._mask & BTN_RELEASE)) {
btn[i]._mask = BTN_RELEASE;
btn[i]._count = 0;
// call callback only if not in ignore state

3
firmware/retro_tech_fw/user/src/btn.h
View File

@ -19,6 +19,9 @@
#define BTN_PULL_UP (1 << 0)
#define BTN_PULL_DOWN (1 << 16)
#define BTN_ACTIVE_LO 0x10
#define BTN_PIN_MASK 0x0f
#define BTN1_PIN 5
#define BTN1_PUPD BTN_PULL_UP

2
firmware/retro_tech_fw/user/src/led_rgbprog.c
View File

@ -434,7 +434,7 @@ void led_rgb_4_typing(uint8_t preview, uint8_t tick)
if (typing_flash_delay <= 8) {
w = 8 - typing_flash_delay;
cursor[color] >>= w;
if (cursor[color] < 12) cursor[color] = 12;
if (cursor[color] < 12) cursor[color] = 0; // idle value
}
}

46
firmware/retro_tech_fw/user/src/ui.c
View File

@ -37,7 +37,7 @@ static uint16_t editor_timeout_timer = 0;
static uint8_t target_gc = 0;
static uint8_t cursor_flash = 0;
static uint8_t cursor_state = 0xff;
static uint8_t cursor_state = 0;
const uint16_t cursor_flash_rates[8] = { // off-to-on flash rates in 1/256 second increments
255, // (0.5 on-off/second)
191, // (0.75 on-off/second)
@ -189,6 +189,9 @@ void ui_btn_release_cb(uint8_t idx)
userconf.cursor_color++;
userconf.cursor_color &= 0x3;
// force cursor to change immediately
cursor_flash = 0;
config_save_timer = UI_CONF_SAVE_TIMEOUT;
break;
@ -302,10 +305,16 @@ static void ui_cursor_flash()
switch (mode) {
case MODE_RUN: {
if (rgb_prog_idx != 4) {
// initial setup
if (cursor_state == 0xff) {
cursor_state = 0;
goto ui_cursor_flash_setup;
if (!cursor_flash) {
// toggle on/off
cursor_state++;
cursor_state &= 1;
// set new cursor rate
cursor_flash = cursor_flash_rates[flash] >> 1;
// set all colors off
cursor[0] = cursor[1] = cursor[2] = 0;
}
// wind down counter
@ -317,8 +326,8 @@ static void ui_cursor_flash()
level = (cursor_flash == cursor_flash_rates[flash] - 1) ? 160 : 255;
// at final frames, dim
if (cursor_flash < 4) {
level >>= (cursor_flash << 1);
if (cursor_flash <= 4) {
level >>= (4 - cursor_flash);
}
}
@ -327,32 +336,19 @@ static void ui_cursor_flash()
cursor[color] = led_gamma(level);
led_is_updated();
}
if (!cursor_flash) {
// toggle on/off
cursor_state++;
cursor_state &= 1;
ui_cursor_flash_setup:
// set new cursor rate
cursor_flash = cursor_flash_rates[flash] >> 1;
// set all colors off
cursor[0] = cursor[1] = cursor[2] = 0;
}
}
break;
}
case MODE_PROGRAM: {
// cursor is always on bright
cursor[color] = 255;
// cursor is always off
cursor[color] = 0;
break;
}
case MODE_PARAMETER: {
// cursor is always on dim
cursor[color] = 16;
// cursor is always off
cursor[color] = 0;
break;
}
@ -490,7 +486,7 @@ void ui_render()
}
// temp: remove me once buttons are tested and working
rgb_prog_idx = 4;
rgb_prog_idx = 0;
led_rgbprog[rgb_prog_idx](LED_RGBPROG_NORMAL, tick);
break;