dc32-retro-tech-addon/firmware/retro_tech_fw/periph/inc/ch32v00x.h

2408 lines
166 KiB
C
Raw Normal View History

/********************************** (C) COPYRIGHT *******************************
* File Name : ch32v00x.h
* Author : WCH
* Version : V1.0.0
* Date : 2022/08/08
* Description : CH32V00x Device Peripheral Access Layer Header File.
*********************************************************************************
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* Attention: This software (modified or not) and binary are used for
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
*******************************************************************************/
#ifndef __CH32V00x_H
#define __CH32V00x_H
#ifdef __cplusplus
extern "C" {
#endif
#define __MPU_PRESENT 0 /* Other CH32 devices does not provide an MPU */
#define __Vendor_SysTickConfig 0 /* Set to 1 if different SysTick Config is used */
#define HSE_VALUE ((uint32_t)24000000) /* Value of the External oscillator in Hz */
/* In the following line adjust the External High Speed oscillator (HSE) Startup Timeout value */
#define HSE_STARTUP_TIMEOUT ((uint16_t)0x2000) /* Time out for HSE start up */
#define HSI_VALUE ((uint32_t)24000000) /* Value of the Internal oscillator in Hz */
/* CH32V00x Standard Peripheral Library version number */
#define __CH32V00x_STDPERIPH_VERSION_MAIN (0x01) /* [15:8] main version */
#define __CH32V00x_STDPERIPH_VERSION_SUB (0x06) /* [7:0] sub version */
#define __CH32V00x_STDPERIPH_VERSION ( (__CH32V00x_STDPERIPH_VERSION_MAIN << 8)\
|(__CH32V00x_STDPERIPH_VERSION_SUB << 0))
/* Interrupt Number Definition, according to the selected device */
typedef enum IRQn
{
/****** RISC-V Processor Exceptions Numbers *******************************************************/
NonMaskableInt_IRQn = 2, /* 2 Non Maskable Interrupt */
EXC_IRQn = 3, /* 3 Exception Interrupt */
SysTicK_IRQn = 12, /* 12 System timer Interrupt */
Software_IRQn = 14, /* 14 software Interrupt */
/****** RISC-V specific Interrupt Numbers *********************************************************/
WWDG_IRQn = 16, /* Window WatchDog Interrupt */
PVD_IRQn = 17, /* PVD through EXTI Line detection Interrupt */
FLASH_IRQn = 18, /* FLASH global Interrupt */
RCC_IRQn = 19, /* RCC global Interrupt */
EXTI7_0_IRQn = 20, /* External Line[7:0] Interrupts */
AWU_IRQn = 21, /* AWU global Interrupt */
DMA1_Channel1_IRQn = 22, /* DMA1 Channel 1 global Interrupt */
DMA1_Channel2_IRQn = 23, /* DMA1 Channel 2 global Interrupt */
DMA1_Channel3_IRQn = 24, /* DMA1 Channel 3 global Interrupt */
DMA1_Channel4_IRQn = 25, /* DMA1 Channel 4 global Interrupt */
DMA1_Channel5_IRQn = 26, /* DMA1 Channel 5 global Interrupt */
DMA1_Channel6_IRQn = 27, /* DMA1 Channel 6 global Interrupt */
DMA1_Channel7_IRQn = 28, /* DMA1 Channel 7 global Interrupt */
ADC_IRQn = 29, /* ADC global Interrupt */
I2C1_EV_IRQn = 30, /* I2C1 Event Interrupt */
I2C1_ER_IRQn = 31, /* I2C1 Error Interrupt */
USART1_IRQn = 32, /* USART1 global Interrupt */
SPI1_IRQn = 33, /* SPI1 global Interrupt */
TIM1_BRK_IRQn = 34, /* TIM1 Break Interrupt */
TIM1_UP_IRQn = 35, /* TIM1 Update Interrupt */
TIM1_TRG_COM_IRQn = 36, /* TIM1 Trigger and Commutation Interrupt */
TIM1_CC_IRQn = 37, /* TIM1 Capture Compare Interrupt */
TIM2_IRQn = 38, /* TIM2 global Interrupt */
} IRQn_Type;
#define HardFault_IRQn EXC_IRQn
#include <stdint.h>
#include <core_riscv.h>
#include <system_ch32v00x.h>
/* Standard Peripheral Library old definitions (maintained for legacy purpose) */
#define HSI_Value HSI_VALUE
#define HSE_Value HSE_VALUE
#define HSEStartUp_TimeOut HSE_STARTUP_TIMEOUT
/* Analog to Digital Converter */
typedef struct
{
__IO uint32_t STATR;
__IO uint32_t CTLR1;
__IO uint32_t CTLR2;
__IO uint32_t SAMPTR1;
__IO uint32_t SAMPTR2;
__IO uint32_t IOFR1;
__IO uint32_t IOFR2;
__IO uint32_t IOFR3;
__IO uint32_t IOFR4;
__IO uint32_t WDHTR;
__IO uint32_t WDLTR;
__IO uint32_t RSQR1;
__IO uint32_t RSQR2;
__IO uint32_t RSQR3;
__IO uint32_t ISQR;
__IO uint32_t IDATAR1;
__IO uint32_t IDATAR2;
__IO uint32_t IDATAR3;
__IO uint32_t IDATAR4;
__IO uint32_t RDATAR;
__IO uint32_t DLYR;
} ADC_TypeDef;
/* Debug MCU */
typedef struct
{
__IO uint32_t CFGR0;
__IO uint32_t CFGR1;
} DBGMCU_TypeDef;
/* DMA Controller */
typedef struct
{
__IO uint32_t CFGR;
__IO uint32_t CNTR;
__IO uint32_t PADDR;
__IO uint32_t MADDR;
} DMA_Channel_TypeDef;
typedef struct
{
__IO uint32_t INTFR;
__IO uint32_t INTFCR;
} DMA_TypeDef;
/* External Interrupt/Event Controller */
typedef struct
{
__IO uint32_t INTENR;
__IO uint32_t EVENR;
__IO uint32_t RTENR;
__IO uint32_t FTENR;
__IO uint32_t SWIEVR;
__IO uint32_t INTFR;
} EXTI_TypeDef;
/* FLASH Registers */
typedef struct
{
__IO uint32_t ACTLR;
__IO uint32_t KEYR;
__IO uint32_t OBKEYR;
__IO uint32_t STATR;
__IO uint32_t CTLR;
__IO uint32_t ADDR;
__IO uint32_t RESERVED;
__IO uint32_t OBR;
__IO uint32_t WPR;
__IO uint32_t MODEKEYR;
__IO uint32_t BOOT_MODEKEYR;
} FLASH_TypeDef;
/* Option Bytes Registers */
typedef struct
{
__IO uint16_t RDPR;
__IO uint16_t USER;
__IO uint16_t Data0;
__IO uint16_t Data1;
__IO uint16_t WRPR0;
__IO uint16_t WRPR1;
} OB_TypeDef;
/* General Purpose I/O */
typedef struct
{
__IO uint32_t CFGLR;
__IO uint32_t CFGHR;
__IO uint32_t INDR;
__IO uint32_t OUTDR;
__IO uint32_t BSHR;
__IO uint32_t BCR;
__IO uint32_t LCKR;
} GPIO_TypeDef;
/* Alternate Function I/O */
typedef struct
{
uint32_t RESERVED0;
__IO uint32_t PCFR1;
__IO uint32_t EXTICR;
} AFIO_TypeDef;
/* Inter Integrated Circuit Interface */
typedef struct
{
__IO uint16_t CTLR1;
uint16_t RESERVED0;
__IO uint16_t CTLR2;
uint16_t RESERVED1;
__IO uint16_t OADDR1;
uint16_t RESERVED2;
__IO uint16_t OADDR2;
uint16_t RESERVED3;
__IO uint16_t DATAR;
uint16_t RESERVED4;
__IO uint16_t STAR1;
uint16_t RESERVED5;
__IO uint16_t STAR2;
uint16_t RESERVED6;
__IO uint16_t CKCFGR;
uint16_t RESERVED7;
} I2C_TypeDef;
/* Independent WatchDog */
typedef struct
{
__IO uint32_t CTLR;
__IO uint32_t PSCR;
__IO uint32_t RLDR;
__IO uint32_t STATR;
} IWDG_TypeDef;
/* Power Control */
typedef struct
{
__IO uint32_t CTLR;
__IO uint32_t CSR;
__IO uint32_t AWUCSR;
__IO uint32_t AWUWR;
__IO uint32_t AWUPSC;
} PWR_TypeDef;
/* Reset and Clock Control */
typedef struct
{
__IO uint32_t CTLR;
__IO uint32_t CFGR0;
__IO uint32_t INTR;
__IO uint32_t APB2PRSTR;
__IO uint32_t APB1PRSTR;
__IO uint32_t AHBPCENR;
__IO uint32_t APB2PCENR;
__IO uint32_t APB1PCENR;
__IO uint32_t RESERVED0;
__IO uint32_t RSTSCKR;
} RCC_TypeDef;
/* Serial Peripheral Interface */
typedef struct
{
__IO uint16_t CTLR1;
uint16_t RESERVED0;
__IO uint16_t CTLR2;
uint16_t RESERVED1;
__IO uint16_t STATR;
uint16_t RESERVED2;
__IO uint16_t DATAR;
uint16_t RESERVED3;
__IO uint16_t CRCR;
uint16_t RESERVED4;
__IO uint16_t RCRCR;
uint16_t RESERVED5;
__IO uint16_t TCRCR;
uint16_t RESERVED6;
uint32_t RESERVED7;
uint32_t RESERVED8;
__IO uint16_t HSCR;
uint16_t RESERVED9;
} SPI_TypeDef;
/* TIM */
typedef struct
{
__IO uint16_t CTLR1;
uint16_t RESERVED0;
__IO uint16_t CTLR2;
uint16_t RESERVED1;
__IO uint16_t SMCFGR;
uint16_t RESERVED2;
__IO uint16_t DMAINTENR;
uint16_t RESERVED3;
__IO uint16_t INTFR;
uint16_t RESERVED4;
__IO uint16_t SWEVGR;
uint16_t RESERVED5;
__IO uint16_t CHCTLR1;
uint16_t RESERVED6;
__IO uint16_t CHCTLR2;
uint16_t RESERVED7;
__IO uint16_t CCER;
uint16_t RESERVED8;
__IO uint16_t CNT;
uint16_t RESERVED9;
__IO uint16_t PSC;
uint16_t RESERVED10;
__IO uint16_t ATRLR;
uint16_t RESERVED11;
__IO uint16_t RPTCR;
uint16_t RESERVED12;
__IO uint32_t CH1CVR;
__IO uint32_t CH2CVR;
__IO uint32_t CH3CVR;
__IO uint32_t CH4CVR;
__IO uint16_t BDTR;
uint16_t RESERVED13;
__IO uint16_t DMACFGR;
uint16_t RESERVED14;
__IO uint16_t DMAADR;
uint16_t RESERVED15;
} TIM_TypeDef;
/* Universal Synchronous Asynchronous Receiver Transmitter */
typedef struct
{
__IO uint16_t STATR;
uint16_t RESERVED0;
__IO uint16_t DATAR;
uint16_t RESERVED1;
__IO uint16_t BRR;
uint16_t RESERVED2;
__IO uint16_t CTLR1;
uint16_t RESERVED3;
__IO uint16_t CTLR2;
uint16_t RESERVED4;
__IO uint16_t CTLR3;
uint16_t RESERVED5;
__IO uint16_t GPR;
uint16_t RESERVED6;
} USART_TypeDef;
/* Window WatchDog */
typedef struct
{
__IO uint32_t CTLR;
__IO uint32_t CFGR;
__IO uint32_t STATR;
} WWDG_TypeDef;
/* Enhanced Registers */
typedef struct
{
__IO uint32_t EXTEN_CTR;
} EXTEN_TypeDef;
/* Peripheral memory map */
#define FLASH_BASE ((uint32_t)0x08000000) /* FLASH base address in the alias region */
#define SRAM_BASE ((uint32_t)0x20000000) /* SRAM base address in the alias region */
#define PERIPH_BASE ((uint32_t)0x40000000) /* Peripheral base address in the alias region */
#define APB1PERIPH_BASE (PERIPH_BASE)
#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000)
#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000)
#define TIM2_BASE (APB1PERIPH_BASE + 0x0000)
#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00)
#define IWDG_BASE (APB1PERIPH_BASE + 0x3000)
#define I2C1_BASE (APB1PERIPH_BASE + 0x5400)
#define PWR_BASE (APB1PERIPH_BASE + 0x7000)
#define AFIO_BASE (APB2PERIPH_BASE + 0x0000)
#define EXTI_BASE (APB2PERIPH_BASE + 0x0400)
#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800)
#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000)
#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400)
#define ADC1_BASE (APB2PERIPH_BASE + 0x2400)
#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00)
#define SPI1_BASE (APB2PERIPH_BASE + 0x3000)
#define USART1_BASE (APB2PERIPH_BASE + 0x3800)
#define DMA1_BASE (AHBPERIPH_BASE + 0x0000)
#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008)
#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C)
#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030)
#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044)
#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058)
#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C)
#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080)
#define RCC_BASE (AHBPERIPH_BASE + 0x1000)
#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /* Flash registers base address */
#define OB_BASE ((uint32_t)0x1FFFF800) /* Flash Option Bytes base address */
#define EXTEN_BASE ((uint32_t)0x40023800)
/* Peripheral declaration */
#define TIM2 ((TIM_TypeDef *)TIM2_BASE)
#define WWDG ((WWDG_TypeDef *)WWDG_BASE)
#define IWDG ((IWDG_TypeDef *)IWDG_BASE)
#define I2C1 ((I2C_TypeDef *)I2C1_BASE)
#define PWR ((PWR_TypeDef *)PWR_BASE)
#define AFIO ((AFIO_TypeDef *)AFIO_BASE)
#define EXTI ((EXTI_TypeDef *)EXTI_BASE)
#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE)
#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE)
#define GPIOD ((GPIO_TypeDef *)GPIOD_BASE)
#define ADC1 ((ADC_TypeDef *)ADC1_BASE)
#define TIM1 ((TIM_TypeDef *)TIM1_BASE)
#define SPI1 ((SPI_TypeDef *)SPI1_BASE)
#define USART1 ((USART_TypeDef *)USART1_BASE)
#define DMA1 ((DMA_TypeDef *)DMA1_BASE)
#define DMA1_Channel1 ((DMA_Channel_TypeDef *)DMA1_Channel1_BASE)
#define DMA1_Channel2 ((DMA_Channel_TypeDef *)DMA1_Channel2_BASE)
#define DMA1_Channel3 ((DMA_Channel_TypeDef *)DMA1_Channel3_BASE)
#define DMA1_Channel4 ((DMA_Channel_TypeDef *)DMA1_Channel4_BASE)
#define DMA1_Channel5 ((DMA_Channel_TypeDef *)DMA1_Channel5_BASE)
#define DMA1_Channel6 ((DMA_Channel_TypeDef *)DMA1_Channel6_BASE)
#define DMA1_Channel7 ((DMA_Channel_TypeDef *)DMA1_Channel7_BASE)
#define RCC ((RCC_TypeDef *)RCC_BASE)
#define FLASH ((FLASH_TypeDef *)FLASH_R_BASE)
#define OB ((OB_TypeDef *)OB_BASE)
#define EXTEN ((EXTEN_TypeDef *)EXTEN_BASE)
/******************************************************************************/
/* Peripheral Registers Bits Definition */
/******************************************************************************/
/******************************************************************************/
/* Analog to Digital Converter */
/******************************************************************************/
/******************** Bit definition for ADC_STATR register ********************/
#define ADC_AWD ((uint8_t)0x01) /* Analog watchdog flag */
#define ADC_EOC ((uint8_t)0x02) /* End of conversion */
#define ADC_JEOC ((uint8_t)0x04) /* Injected channel end of conversion */
#define ADC_JSTRT ((uint8_t)0x08) /* Injected channel Start flag */
#define ADC_STRT ((uint8_t)0x10) /* Regular channel Start flag */
/******************* Bit definition for ADC_CTLR1 register ********************/
#define ADC_AWDCH ((uint32_t)0x0000001F) /* AWDCH[4:0] bits (Analog watchdog channel select bits) */
#define ADC_AWDCH_0 ((uint32_t)0x00000001) /* Bit 0 */
#define ADC_AWDCH_1 ((uint32_t)0x00000002) /* Bit 1 */
#define ADC_AWDCH_2 ((uint32_t)0x00000004) /* Bit 2 */
#define ADC_AWDCH_3 ((uint32_t)0x00000008) /* Bit 3 */
#define ADC_AWDCH_4 ((uint32_t)0x00000010) /* Bit 4 */
#define ADC_EOCIE ((uint32_t)0x00000020) /* Interrupt enable for EOC */
#define ADC_AWDIE ((uint32_t)0x00000040) /* Analog Watchdog interrupt enable */
#define ADC_JEOCIE ((uint32_t)0x00000080) /* Interrupt enable for injected channels */
#define ADC_SCAN ((uint32_t)0x00000100) /* Scan mode */
#define ADC_AWDSGL ((uint32_t)0x00000200) /* Enable the watchdog on a single channel in scan mode */
#define ADC_JAUTO ((uint32_t)0x00000400) /* Automatic injected group conversion */
#define ADC_DISCEN ((uint32_t)0x00000800) /* Discontinuous mode on regular channels */
#define ADC_JDISCEN ((uint32_t)0x00001000) /* Discontinuous mode on injected channels */
#define ADC_DISCNUM ((uint32_t)0x0000E000) /* DISCNUM[2:0] bits (Discontinuous mode channel count) */
#define ADC_DISCNUM_0 ((uint32_t)0x00002000) /* Bit 0 */
#define ADC_DISCNUM_1 ((uint32_t)0x00004000) /* Bit 1 */
#define ADC_DISCNUM_2 ((uint32_t)0x00008000) /* Bit 2 */
#define ADC_DUALMOD ((uint32_t)0x000F0000) /* DUALMOD[3:0] bits (Dual mode selection) */
#define ADC_DUALMOD_0 ((uint32_t)0x00010000) /* Bit 0 */
#define ADC_DUALMOD_1 ((uint32_t)0x00020000) /* Bit 1 */
#define ADC_DUALMOD_2 ((uint32_t)0x00040000) /* Bit 2 */
#define ADC_DUALMOD_3 ((uint32_t)0x00080000) /* Bit 3 */
#define ADC_JAWDEN ((uint32_t)0x00400000) /* Analog watchdog enable on injected channels */
#define ADC_AWDEN ((uint32_t)0x00800000) /* Analog watchdog enable on regular channels */
/******************* Bit definition for ADC_CTLR2 register ********************/
#define ADC_ADON ((uint32_t)0x00000001) /* A/D Converter ON / OFF */
#define ADC_CONT ((uint32_t)0x00000002) /* Continuous Conversion */
#define ADC_CAL ((uint32_t)0x00000004) /* A/D Calibration */
#define ADC_RSTCAL ((uint32_t)0x00000008) /* Reset Calibration */
#define ADC_DMA ((uint32_t)0x00000100) /* Direct Memory access mode */
#define ADC_ALIGN ((uint32_t)0x00000800) /* Data Alignment */
#define ADC_JEXTSEL ((uint32_t)0x00007000) /* JEXTSEL[2:0] bits (External event select for injected group) */
#define ADC_JEXTSEL_0 ((uint32_t)0x00001000) /* Bit 0 */
#define ADC_JEXTSEL_1 ((uint32_t)0x00002000) /* Bit 1 */
#define ADC_JEXTSEL_2 ((uint32_t)0x00004000) /* Bit 2 */
#define ADC_JEXTTRIG ((uint32_t)0x00008000) /* External Trigger Conversion mode for injected channels */
#define ADC_EXTSEL ((uint32_t)0x000E0000) /* EXTSEL[2:0] bits (External Event Select for regular group) */
#define ADC_EXTSEL_0 ((uint32_t)0x00020000) /* Bit 0 */
#define ADC_EXTSEL_1 ((uint32_t)0x00040000) /* Bit 1 */
#define ADC_EXTSEL_2 ((uint32_t)0x00080000) /* Bit 2 */
#define ADC_EXTTRIG ((uint32_t)0x00100000) /* External Trigger Conversion mode for regular channels */
#define ADC_JSWSTART ((uint32_t)0x00200000) /* Start Conversion of injected channels */
#define ADC_SWSTART ((uint32_t)0x00400000) /* Start Conversion of regular channels */
#define ADC_TSVREFE ((uint32_t)0x00800000) /* Temperature Sensor and VREFINT Enable */
/****************** Bit definition for ADC_SAMPTR1 register *******************/
#define ADC_SMP10 ((uint32_t)0x00000007) /* SMP10[2:0] bits (Channel 10 Sample time selection) */
#define ADC_SMP10_0 ((uint32_t)0x00000001) /* Bit 0 */
#define ADC_SMP10_1 ((uint32_t)0x00000002) /* Bit 1 */
#define ADC_SMP10_2 ((uint32_t)0x00000004) /* Bit 2 */
#define ADC_SMP11 ((uint32_t)0x00000038) /* SMP11[2:0] bits (Channel 11 Sample time selection) */
#define ADC_SMP11_0 ((uint32_t)0x00000008) /* Bit 0 */
#define ADC_SMP11_1 ((uint32_t)0x00000010) /* Bit 1 */
#define ADC_SMP11_2 ((uint32_t)0x00000020) /* Bit 2 */
#define ADC_SMP12 ((uint32_t)0x000001C0) /* SMP12[2:0] bits (Channel 12 Sample time selection) */
#define ADC_SMP12_0 ((uint32_t)0x00000040) /* Bit 0 */
#define ADC_SMP12_1 ((uint32_t)0x00000080) /* Bit 1 */
#define ADC_SMP12_2 ((uint32_t)0x00000100) /* Bit 2 */
#define ADC_SMP13 ((uint32_t)0x00000E00) /* SMP13[2:0] bits (Channel 13 Sample time selection) */
#define ADC_SMP13_0 ((uint32_t)0x00000200) /* Bit 0 */
#define ADC_SMP13_1 ((uint32_t)0x00000400) /* Bit 1 */
#define ADC_SMP13_2 ((uint32_t)0x00000800) /* Bit 2 */
#define ADC_SMP14 ((uint32_t)0x00007000) /* SMP14[2:0] bits (Channel 14 Sample time selection) */
#define ADC_SMP14_0 ((uint32_t)0x00001000) /* Bit 0 */
#define ADC_SMP14_1 ((uint32_t)0x00002000) /* Bit 1 */
#define ADC_SMP14_2 ((uint32_t)0x00004000) /* Bit 2 */
#define ADC_SMP15 ((uint32_t)0x00038000) /* SMP15[2:0] bits (Channel 15 Sample time selection) */
#define ADC_SMP15_0 ((uint32_t)0x00008000) /* Bit 0 */
#define ADC_SMP15_1 ((uint32_t)0x00010000) /* Bit 1 */
#define ADC_SMP15_2 ((uint32_t)0x00020000) /* Bit 2 */
#define ADC_SMP16 ((uint32_t)0x001C0000) /* SMP16[2:0] bits (Channel 16 Sample time selection) */
#define ADC_SMP16_0 ((uint32_t)0x00040000) /* Bit 0 */
#define ADC_SMP16_1 ((uint32_t)0x00080000) /* Bit 1 */
#define ADC_SMP16_2 ((uint32_t)0x00100000) /* Bit 2 */
#define ADC_SMP17 ((uint32_t)0x00E00000) /* SMP17[2:0] bits (Channel 17 Sample time selection) */
#define ADC_SMP17_0 ((uint32_t)0x00200000) /* Bit 0 */
#define ADC_SMP17_1 ((uint32_t)0x00400000) /* Bit 1 */
#define ADC_SMP17_2 ((uint32_t)0x00800000) /* Bit 2 */
/****************** Bit definition for ADC_SAMPTR2 register *******************/
#define ADC_SMP0 ((uint32_t)0x00000007) /* SMP0[2:0] bits (Channel 0 Sample time selection) */
#define ADC_SMP0_0 ((uint32_t)0x00000001) /* Bit 0 */
#define ADC_SMP0_1 ((uint32_t)0x00000002) /* Bit 1 */
#define ADC_SMP0_2 ((uint32_t)0x00000004) /* Bit 2 */
#define ADC_SMP1 ((uint32_t)0x00000038) /* SMP1[2:0] bits (Channel 1 Sample time selection) */
#define ADC_SMP1_0 ((uint32_t)0x00000008) /* Bit 0 */
#define ADC_SMP1_1 ((uint32_t)0x00000010) /* Bit 1 */
#define ADC_SMP1_2 ((uint32_t)0x00000020) /* Bit 2 */
#define ADC_SMP2 ((uint32_t)0x000001C0) /* SMP2[2:0] bits (Channel 2 Sample time selection) */
#define ADC_SMP2_0 ((uint32_t)0x00000040) /* Bit 0 */
#define ADC_SMP2_1 ((uint32_t)0x00000080) /* Bit 1 */
#define ADC_SMP2_2 ((uint32_t)0x00000100) /* Bit 2 */
#define ADC_SMP3 ((uint32_t)0x00000E00) /* SMP3[2:0] bits (Channel 3 Sample time selection) */
#define ADC_SMP3_0 ((uint32_t)0x00000200) /* Bit 0 */
#define ADC_SMP3_1 ((uint32_t)0x00000400) /* Bit 1 */
#define ADC_SMP3_2 ((uint32_t)0x00000800) /* Bit 2 */
#define ADC_SMP4 ((uint32_t)0x00007000) /* SMP4[2:0] bits (Channel 4 Sample time selection) */
#define ADC_SMP4_0 ((uint32_t)0x00001000) /* Bit 0 */
#define ADC_SMP4_1 ((uint32_t)0x00002000) /* Bit 1 */
#define ADC_SMP4_2 ((uint32_t)0x00004000) /* Bit 2 */
#define ADC_SMP5 ((uint32_t)0x00038000) /* SMP5[2:0] bits (Channel 5 Sample time selection) */
#define ADC_SMP5_0 ((uint32_t)0x00008000) /* Bit 0 */
#define ADC_SMP5_1 ((uint32_t)0x00010000) /* Bit 1 */
#define ADC_SMP5_2 ((uint32_t)0x00020000) /* Bit 2 */
#define ADC_SMP6 ((uint32_t)0x001C0000) /* SMP6[2:0] bits (Channel 6 Sample time selection) */
#define ADC_SMP6_0 ((uint32_t)0x00040000) /* Bit 0 */
#define ADC_SMP6_1 ((uint32_t)0x00080000) /* Bit 1 */
#define ADC_SMP6_2 ((uint32_t)0x00100000) /* Bit 2 */
#define ADC_SMP7 ((uint32_t)0x00E00000) /* SMP7[2:0] bits (Channel 7 Sample time selection) */
#define ADC_SMP7_0 ((uint32_t)0x00200000) /* Bit 0 */
#define ADC_SMP7_1 ((uint32_t)0x00400000) /* Bit 1 */
#define ADC_SMP7_2 ((uint32_t)0x00800000) /* Bit 2 */
#define ADC_SMP8 ((uint32_t)0x07000000) /* SMP8[2:0] bits (Channel 8 Sample time selection) */
#define ADC_SMP8_0 ((uint32_t)0x01000000) /* Bit 0 */
#define ADC_SMP8_1 ((uint32_t)0x02000000) /* Bit 1 */
#define ADC_SMP8_2 ((uint32_t)0x04000000) /* Bit 2 */
#define ADC_SMP9 ((uint32_t)0x38000000) /* SMP9[2:0] bits (Channel 9 Sample time selection) */
#define ADC_SMP9_0 ((uint32_t)0x08000000) /* Bit 0 */
#define ADC_SMP9_1 ((uint32_t)0x10000000) /* Bit 1 */
#define ADC_SMP9_2 ((uint32_t)0x20000000) /* Bit 2 */
/****************** Bit definition for ADC_IOFR1 register *******************/
#define ADC_JOFFSET1 ((uint16_t)0x0FFF) /* Data offset for injected channel 1 */
/****************** Bit definition for ADC_IOFR2 register *******************/
#define ADC_JOFFSET2 ((uint16_t)0x0FFF) /* Data offset for injected channel 2 */
/****************** Bit definition for ADC_IOFR3 register *******************/
#define ADC_JOFFSET3 ((uint16_t)0x0FFF) /* Data offset for injected channel 3 */
/****************** Bit definition for ADC_IOFR4 register *******************/
#define ADC_JOFFSET4 ((uint16_t)0x0FFF) /* Data offset for injected channel 4 */
/******************* Bit definition for ADC_WDHTR register ********************/
#define ADC_HT ((uint16_t)0x0FFF) /* Analog watchdog high threshold */
/******************* Bit definition for ADC_WDLTR register ********************/
#define ADC_LT ((uint16_t)0x0FFF) /* Analog watchdog low threshold */
/******************* Bit definition for ADC_RSQR1 register *******************/
#define ADC_SQ13 ((uint32_t)0x0000001F) /* SQ13[4:0] bits (13th conversion in regular sequence) */
#define ADC_SQ13_0 ((uint32_t)0x00000001) /* Bit 0 */
#define ADC_SQ13_1 ((uint32_t)0x00000002) /* Bit 1 */
#define ADC_SQ13_2 ((uint32_t)0x00000004) /* Bit 2 */
#define ADC_SQ13_3 ((uint32_t)0x00000008) /* Bit 3 */
#define ADC_SQ13_4 ((uint32_t)0x00000010) /* Bit 4 */
#define ADC_SQ14 ((uint32_t)0x000003E0) /* SQ14[4:0] bits (14th conversion in regular sequence) */
#define ADC_SQ14_0 ((uint32_t)0x00000020) /* Bit 0 */
#define ADC_SQ14_1 ((uint32_t)0x00000040) /* Bit 1 */
#define ADC_SQ14_2 ((uint32_t)0x00000080) /* Bit 2 */
#define ADC_SQ14_3 ((uint32_t)0x00000100) /* Bit 3 */
#define ADC_SQ14_4 ((uint32_t)0x00000200) /* Bit 4 */
#define ADC_SQ15 ((uint32_t)0x00007C00) /* SQ15[4:0] bits (15th conversion in regular sequence) */
#define ADC_SQ15_0 ((uint32_t)0x00000400) /* Bit 0 */
#define ADC_SQ15_1 ((uint32_t)0x00000800) /* Bit 1 */
#define ADC_SQ15_2 ((uint32_t)0x00001000) /* Bit 2 */
#define ADC_SQ15_3 ((uint32_t)0x00002000) /* Bit 3 */
#define ADC_SQ15_4 ((uint32_t)0x00004000) /* Bit 4 */
#define ADC_SQ16 ((uint32_t)0x000F8000) /* SQ16[4:0] bits (16th conversion in regular sequence) */
#define ADC_SQ16_0 ((uint32_t)0x00008000) /* Bit 0 */
#define ADC_SQ16_1 ((uint32_t)0x00010000) /* Bit 1 */
#define ADC_SQ16_2 ((uint32_t)0x00020000) /* Bit 2 */
#define ADC_SQ16_3 ((uint32_t)0x00040000) /* Bit 3 */
#define ADC_SQ16_4 ((uint32_t)0x00080000) /* Bit 4 */
#define ADC_L ((uint32_t)0x00F00000) /* L[3:0] bits (Regular channel sequence length) */
#define ADC_L_0 ((uint32_t)0x00100000) /* Bit 0 */
#define ADC_L_1 ((uint32_t)0x00200000) /* Bit 1 */
#define ADC_L_2 ((uint32_t)0x00400000) /* Bit 2 */
#define ADC_L_3 ((uint32_t)0x00800000) /* Bit 3 */
/******************* Bit definition for ADC_RSQR2 register *******************/
#define ADC_SQ7 ((uint32_t)0x0000001F) /* SQ7[4:0] bits (7th conversion in regular sequence) */
#define ADC_SQ7_0 ((uint32_t)0x00000001) /* Bit 0 */
#define ADC_SQ7_1 ((uint32_t)0x00000002) /* Bit 1 */
#define ADC_SQ7_2 ((uint32_t)0x00000004) /* Bit 2 */
#define ADC_SQ7_3 ((uint32_t)0x00000008) /* Bit 3 */
#define ADC_SQ7_4 ((uint32_t)0x00000010) /* Bit 4 */
#define ADC_SQ8 ((uint32_t)0x000003E0) /* SQ8[4:0] bits (8th conversion in regular sequence) */
#define ADC_SQ8_0 ((uint32_t)0x00000020) /* Bit 0 */
#define ADC_SQ8_1 ((uint32_t)0x00000040) /* Bit 1 */
#define ADC_SQ8_2 ((uint32_t)0x00000080) /* Bit 2 */
#define ADC_SQ8_3 ((uint32_t)0x00000100) /* Bit 3 */
#define ADC_SQ8_4 ((uint32_t)0x00000200) /* Bit 4 */
#define ADC_SQ9 ((uint32_t)0x00007C00) /* SQ9[4:0] bits (9th conversion in regular sequence) */
#define ADC_SQ9_0 ((uint32_t)0x00000400) /* Bit 0 */
#define ADC_SQ9_1 ((uint32_t)0x00000800) /* Bit 1 */
#define ADC_SQ9_2 ((uint32_t)0x00001000) /* Bit 2 */
#define ADC_SQ9_3 ((uint32_t)0x00002000) /* Bit 3 */
#define ADC_SQ9_4 ((uint32_t)0x00004000) /* Bit 4 */
#define ADC_SQ10 ((uint32_t)0x000F8000) /* SQ10[4:0] bits (10th conversion in regular sequence) */
#define ADC_SQ10_0 ((uint32_t)0x00008000) /* Bit 0 */
#define ADC_SQ10_1 ((uint32_t)0x00010000) /* Bit 1 */
#define ADC_SQ10_2 ((uint32_t)0x00020000) /* Bit 2 */
#define ADC_SQ10_3 ((uint32_t)0x00040000) /* Bit 3 */
#define ADC_SQ10_4 ((uint32_t)0x00080000) /* Bit 4 */
#define ADC_SQ11 ((uint32_t)0x01F00000) /* SQ11[4:0] bits (11th conversion in regular sequence) */
#define ADC_SQ11_0 ((uint32_t)0x00100000) /* Bit 0 */
#define ADC_SQ11_1 ((uint32_t)0x00200000) /* Bit 1 */
#define ADC_SQ11_2 ((uint32_t)0x00400000) /* Bit 2 */
#define ADC_SQ11_3 ((uint32_t)0x00800000) /* Bit 3 */
#define ADC_SQ11_4 ((uint32_t)0x01000000) /* Bit 4 */
#define ADC_SQ12 ((uint32_t)0x3E000000) /* SQ12[4:0] bits (12th conversion in regular sequence) */
#define ADC_SQ12_0 ((uint32_t)0x02000000) /* Bit 0 */
#define ADC_SQ12_1 ((uint32_t)0x04000000) /* Bit 1 */
#define ADC_SQ12_2 ((uint32_t)0x08000000) /* Bit 2 */
#define ADC_SQ12_3 ((uint32_t)0x10000000) /* Bit 3 */
#define ADC_SQ12_4 ((uint32_t)0x20000000) /* Bit 4 */
/******************* Bit definition for ADC_RSQR3 register *******************/
#define ADC_SQ1 ((uint32_t)0x0000001F) /* SQ1[4:0] bits (1st conversion in regular sequence) */
#define ADC_SQ1_0 ((uint32_t)0x00000001) /* Bit 0 */
#define ADC_SQ1_1 ((uint32_t)0x00000002) /* Bit 1 */
#define ADC_SQ1_2 ((uint32_t)0x00000004) /* Bit 2 */
#define ADC_SQ1_3 ((uint32_t)0x00000008) /* Bit 3 */
#define ADC_SQ1_4 ((uint32_t)0x00000010) /* Bit 4 */
#define ADC_SQ2 ((uint32_t)0x000003E0) /* SQ2[4:0] bits (2nd conversion in regular sequence) */
#define ADC_SQ2_0 ((uint32_t)0x00000020) /* Bit 0 */
#define ADC_SQ2_1 ((uint32_t)0x00000040) /* Bit 1 */
#define ADC_SQ2_2 ((uint32_t)0x00000080) /* Bit 2 */
#define ADC_SQ2_3 ((uint32_t)0x00000100) /* Bit 3 */
#define ADC_SQ2_4 ((uint32_t)0x00000200) /* Bit 4 */
#define ADC_SQ3 ((uint32_t)0x00007C00) /* SQ3[4:0] bits (3rd conversion in regular sequence) */
#define ADC_SQ3_0 ((uint32_t)0x00000400) /* Bit 0 */
#define ADC_SQ3_1 ((uint32_t)0x00000800) /* Bit 1 */
#define ADC_SQ3_2 ((uint32_t)0x00001000) /* Bit 2 */
#define ADC_SQ3_3 ((uint32_t)0x00002000) /* Bit 3 */
#define ADC_SQ3_4 ((uint32_t)0x00004000) /* Bit 4 */
#define ADC_SQ4 ((uint32_t)0x000F8000) /* SQ4[4:0] bits (4th conversion in regular sequence) */
#define ADC_SQ4_0 ((uint32_t)0x00008000) /* Bit 0 */
#define ADC_SQ4_1 ((uint32_t)0x00010000) /* Bit 1 */
#define ADC_SQ4_2 ((uint32_t)0x00020000) /* Bit 2 */
#define ADC_SQ4_3 ((uint32_t)0x00040000) /* Bit 3 */
#define ADC_SQ4_4 ((uint32_t)0x00080000) /* Bit 4 */
#define ADC_SQ5 ((uint32_t)0x01F00000) /* SQ5[4:0] bits (5th conversion in regular sequence) */
#define ADC_SQ5_0 ((uint32_t)0x00100000) /* Bit 0 */
#define ADC_SQ5_1 ((uint32_t)0x00200000) /* Bit 1 */
#define ADC_SQ5_2 ((uint32_t)0x00400000) /* Bit 2 */
#define ADC_SQ5_3 ((uint32_t)0x00800000) /* Bit 3 */
#define ADC_SQ5_4 ((uint32_t)0x01000000) /* Bit 4 */
#define ADC_SQ6 ((uint32_t)0x3E000000) /* SQ6[4:0] bits (6th conversion in regular sequence) */
#define ADC_SQ6_0 ((uint32_t)0x02000000) /* Bit 0 */
#define ADC_SQ6_1 ((uint32_t)0x04000000) /* Bit 1 */
#define ADC_SQ6_2 ((uint32_t)0x08000000) /* Bit 2 */
#define ADC_SQ6_3 ((uint32_t)0x10000000) /* Bit 3 */
#define ADC_SQ6_4 ((uint32_t)0x20000000) /* Bit 4 */
/******************* Bit definition for ADC_ISQR register *******************/
#define ADC_JSQ1 ((uint32_t)0x0000001F) /* JSQ1[4:0] bits (1st conversion in injected sequence) */
#define ADC_JSQ1_0 ((uint32_t)0x00000001) /* Bit 0 */
#define ADC_JSQ1_1 ((uint32_t)0x00000002) /* Bit 1 */
#define ADC_JSQ1_2 ((uint32_t)0x00000004) /* Bit 2 */
#define ADC_JSQ1_3 ((uint32_t)0x00000008) /* Bit 3 */
#define ADC_JSQ1_4 ((uint32_t)0x00000010) /* Bit 4 */
#define ADC_JSQ2 ((uint32_t)0x000003E0) /* JSQ2[4:0] bits (2nd conversion in injected sequence) */
#define ADC_JSQ2_0 ((uint32_t)0x00000020) /* Bit 0 */
#define ADC_JSQ2_1 ((uint32_t)0x00000040) /* Bit 1 */
#define ADC_JSQ2_2 ((uint32_t)0x00000080) /* Bit 2 */
#define ADC_JSQ2_3 ((uint32_t)0x00000100) /* Bit 3 */
#define ADC_JSQ2_4 ((uint32_t)0x00000200) /* Bit 4 */
#define ADC_JSQ3 ((uint32_t)0x00007C00) /* JSQ3[4:0] bits (3rd conversion in injected sequence) */
#define ADC_JSQ3_0 ((uint32_t)0x00000400) /* Bit 0 */
#define ADC_JSQ3_1 ((uint32_t)0x00000800) /* Bit 1 */
#define ADC_JSQ3_2 ((uint32_t)0x00001000) /* Bit 2 */
#define ADC_JSQ3_3 ((uint32_t)0x00002000) /* Bit 3 */
#define ADC_JSQ3_4 ((uint32_t)0x00004000) /* Bit 4 */
#define ADC_JSQ4 ((uint32_t)0x000F8000) /* JSQ4[4:0] bits (4th conversion in injected sequence) */
#define ADC_JSQ4_0 ((uint32_t)0x00008000) /* Bit 0 */
#define ADC_JSQ4_1 ((uint32_t)0x00010000) /* Bit 1 */
#define ADC_JSQ4_2 ((uint32_t)0x00020000) /* Bit 2 */
#define ADC_JSQ4_3 ((uint32_t)0x00040000) /* Bit 3 */
#define ADC_JSQ4_4 ((uint32_t)0x00080000) /* Bit 4 */
#define ADC_JL ((uint32_t)0x00300000) /* JL[1:0] bits (Injected Sequence length) */
#define ADC_JL_0 ((uint32_t)0x00100000) /* Bit 0 */
#define ADC_JL_1 ((uint32_t)0x00200000) /* Bit 1 */
/******************* Bit definition for ADC_IDATAR1 register *******************/
#define ADC_IDATAR1_JDATA ((uint16_t)0xFFFF) /* Injected data */
/******************* Bit definition for ADC_IDATAR2 register *******************/
#define ADC_IDATAR2_JDATA ((uint16_t)0xFFFF) /* Injected data */
/******************* Bit definition for ADC_IDATAR3 register *******************/
#define ADC_IDATAR3_JDATA ((uint16_t)0xFFFF) /* Injected data */
/******************* Bit definition for ADC_IDATAR4 register *******************/
#define ADC_IDATAR4_JDATA ((uint16_t)0xFFFF) /* Injected data */
/******************** Bit definition for ADC_RDATAR register ********************/
#define ADC_RDATAR_DATA ((uint32_t)0x0000FFFF) /* Regular data */
#define ADC_RDATAR_ADC2DATA ((uint32_t)0xFFFF0000) /* ADC2 data */
/******************************************************************************/
/* DMA Controller */
/******************************************************************************/
/******************* Bit definition for DMA_INTFR register ********************/
#define DMA_GIF1 ((uint32_t)0x00000001) /* Channel 1 Global interrupt flag */
#define DMA_TCIF1 ((uint32_t)0x00000002) /* Channel 1 Transfer Complete flag */
#define DMA_HTIF1 ((uint32_t)0x00000004) /* Channel 1 Half Transfer flag */
#define DMA_TEIF1 ((uint32_t)0x00000008) /* Channel 1 Transfer Error flag */
#define DMA_GIF2 ((uint32_t)0x00000010) /* Channel 2 Global interrupt flag */
#define DMA_TCIF2 ((uint32_t)0x00000020) /* Channel 2 Transfer Complete flag */
#define DMA_HTIF2 ((uint32_t)0x00000040) /* Channel 2 Half Transfer flag */
#define DMA_TEIF2 ((uint32_t)0x00000080) /* Channel 2 Transfer Error flag */
#define DMA_GIF3 ((uint32_t)0x00000100) /* Channel 3 Global interrupt flag */
#define DMA_TCIF3 ((uint32_t)0x00000200) /* Channel 3 Transfer Complete flag */
#define DMA_HTIF3 ((uint32_t)0x00000400) /* Channel 3 Half Transfer flag */
#define DMA_TEIF3 ((uint32_t)0x00000800) /* Channel 3 Transfer Error flag */
#define DMA_GIF4 ((uint32_t)0x00001000) /* Channel 4 Global interrupt flag */
#define DMA_TCIF4 ((uint32_t)0x00002000) /* Channel 4 Transfer Complete flag */
#define DMA_HTIF4 ((uint32_t)0x00004000) /* Channel 4 Half Transfer flag */
#define DMA_TEIF4 ((uint32_t)0x00008000) /* Channel 4 Transfer Error flag */
#define DMA_GIF5 ((uint32_t)0x00010000) /* Channel 5 Global interrupt flag */
#define DMA_TCIF5 ((uint32_t)0x00020000) /* Channel 5 Transfer Complete flag */
#define DMA_HTIF5 ((uint32_t)0x00040000) /* Channel 5 Half Transfer flag */
#define DMA_TEIF5 ((uint32_t)0x00080000) /* Channel 5 Transfer Error flag */
#define DMA_GIF6 ((uint32_t)0x00100000) /* Channel 6 Global interrupt flag */
#define DMA_TCIF6 ((uint32_t)0x00200000) /* Channel 6 Transfer Complete flag */
#define DMA_HTIF6 ((uint32_t)0x00400000) /* Channel 6 Half Transfer flag */
#define DMA_TEIF6 ((uint32_t)0x00800000) /* Channel 6 Transfer Error flag */
#define DMA_GIF7 ((uint32_t)0x01000000) /* Channel 7 Global interrupt flag */
#define DMA_TCIF7 ((uint32_t)0x02000000) /* Channel 7 Transfer Complete flag */
#define DMA_HTIF7 ((uint32_t)0x04000000) /* Channel 7 Half Transfer flag */
#define DMA_TEIF7 ((uint32_t)0x08000000) /* Channel 7 Transfer Error flag */
/******************* Bit definition for DMA_INTFCR register *******************/
#define DMA_CGIF1 ((uint32_t)0x00000001) /* Channel 1 Global interrupt clear */
#define DMA_CTCIF1 ((uint32_t)0x00000002) /* Channel 1 Transfer Complete clear */
#define DMA_CHTIF1 ((uint32_t)0x00000004) /* Channel 1 Half Transfer clear */
#define DMA_CTEIF1 ((uint32_t)0x00000008) /* Channel 1 Transfer Error clear */
#define DMA_CGIF2 ((uint32_t)0x00000010) /* Channel 2 Global interrupt clear */
#define DMA_CTCIF2 ((uint32_t)0x00000020) /* Channel 2 Transfer Complete clear */
#define DMA_CHTIF2 ((uint32_t)0x00000040) /* Channel 2 Half Transfer clear */
#define DMA_CTEIF2 ((uint32_t)0x00000080) /* Channel 2 Transfer Error clear */
#define DMA_CGIF3 ((uint32_t)0x00000100) /* Channel 3 Global interrupt clear */
#define DMA_CTCIF3 ((uint32_t)0x00000200) /* Channel 3 Transfer Complete clear */
#define DMA_CHTIF3 ((uint32_t)0x00000400) /* Channel 3 Half Transfer clear */
#define DMA_CTEIF3 ((uint32_t)0x00000800) /* Channel 3 Transfer Error clear */
#define DMA_CGIF4 ((uint32_t)0x00001000) /* Channel 4 Global interrupt clear */
#define DMA_CTCIF4 ((uint32_t)0x00002000) /* Channel 4 Transfer Complete clear */
#define DMA_CHTIF4 ((uint32_t)0x00004000) /* Channel 4 Half Transfer clear */
#define DMA_CTEIF4 ((uint32_t)0x00008000) /* Channel 4 Transfer Error clear */
#define DMA_CGIF5 ((uint32_t)0x00010000) /* Channel 5 Global interrupt clear */
#define DMA_CTCIF5 ((uint32_t)0x00020000) /* Channel 5 Transfer Complete clear */
#define DMA_CHTIF5 ((uint32_t)0x00040000) /* Channel 5 Half Transfer clear */
#define DMA_CTEIF5 ((uint32_t)0x00080000) /* Channel 5 Transfer Error clear */
#define DMA_CGIF6 ((uint32_t)0x00100000) /* Channel 6 Global interrupt clear */
#define DMA_CTCIF6 ((uint32_t)0x00200000) /* Channel 6 Transfer Complete clear */
#define DMA_CHTIF6 ((uint32_t)0x00400000) /* Channel 6 Half Transfer clear */
#define DMA_CTEIF6 ((uint32_t)0x00800000) /* Channel 6 Transfer Error clear */
#define DMA_CGIF7 ((uint32_t)0x01000000) /* Channel 7 Global interrupt clear */
#define DMA_CTCIF7 ((uint32_t)0x02000000) /* Channel 7 Transfer Complete clear */
#define DMA_CHTIF7 ((uint32_t)0x04000000) /* Channel 7 Half Transfer clear */
#define DMA_CTEIF7 ((uint32_t)0x08000000) /* Channel 7 Transfer Error clear */
/******************* Bit definition for DMA_CFGR1 register *******************/
#define DMA_CFGR1_EN ((uint16_t)0x0001) /* Channel enable*/
#define DMA_CFGR1_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */
#define DMA_CFGR1_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */
#define DMA_CFGR1_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */
#define DMA_CFGR1_DIR ((uint16_t)0x0010) /* Data transfer direction */
#define DMA_CFGR1_CIRC ((uint16_t)0x0020) /* Circular mode */
#define DMA_CFGR1_PINC ((uint16_t)0x0040) /* Peripheral increment mode */
#define DMA_CFGR1_MINC ((uint16_t)0x0080) /* Memory increment mode */
#define DMA_CFGR1_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */
#define DMA_CFGR1_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */
#define DMA_CFGR1_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */
#define DMA_CFGR1_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */
#define DMA_CFGR1_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */
#define DMA_CFGR1_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */
#define DMA_CFGR1_PL ((uint16_t)0x3000) /* PL[1:0] bits(Channel Priority level) */
#define DMA_CFGR1_PL_0 ((uint16_t)0x1000) /* Bit 0 */
#define DMA_CFGR1_PL_1 ((uint16_t)0x2000) /* Bit 1 */
#define DMA_CFGR1_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode */
/******************* Bit definition for DMA_CFGR2 register *******************/
#define DMA_CFGR2_EN ((uint16_t)0x0001) /* Channel enable */
#define DMA_CFGR2_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */
#define DMA_CFGR2_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */
#define DMA_CFGR2_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */
#define DMA_CFGR2_DIR ((uint16_t)0x0010) /* Data transfer direction */
#define DMA_CFGR2_CIRC ((uint16_t)0x0020) /* Circular mode */
#define DMA_CFGR2_PINC ((uint16_t)0x0040) /* Peripheral increment mode */
#define DMA_CFGR2_MINC ((uint16_t)0x0080) /* Memory increment mode */
#define DMA_CFGR2_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */
#define DMA_CFGR2_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */
#define DMA_CFGR2_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */
#define DMA_CFGR2_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */
#define DMA_CFGR2_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */
#define DMA_CFGR2_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */
#define DMA_CFGR2_PL ((uint16_t)0x3000) /* PL[1:0] bits (Channel Priority level) */
#define DMA_CFGR2_PL_0 ((uint16_t)0x1000) /* Bit 0 */
#define DMA_CFGR2_PL_1 ((uint16_t)0x2000) /* Bit 1 */
#define DMA_CFGR2_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode */
/******************* Bit definition for DMA_CFGR3 register *******************/
#define DMA_CFGR3_EN ((uint16_t)0x0001) /* Channel enable */
#define DMA_CFGR3_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */
#define DMA_CFGR3_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */
#define DMA_CFGR3_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */
#define DMA_CFGR3_DIR ((uint16_t)0x0010) /* Data transfer direction */
#define DMA_CFGR3_CIRC ((uint16_t)0x0020) /* Circular mode */
#define DMA_CFGR3_PINC ((uint16_t)0x0040) /* Peripheral increment mode */
#define DMA_CFGR3_MINC ((uint16_t)0x0080) /* Memory increment mode */
#define DMA_CFGR3_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */
#define DMA_CFGR3_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */
#define DMA_CFGR3_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */
#define DMA_CFGR3_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */
#define DMA_CFGR3_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */
#define DMA_CFGR3_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */
#define DMA_CFGR3_PL ((uint16_t)0x3000) /* PL[1:0] bits (Channel Priority level) */
#define DMA_CFGR3_PL_0 ((uint16_t)0x1000) /* Bit 0 */
#define DMA_CFGR3_PL_1 ((uint16_t)0x2000) /* Bit 1 */
#define DMA_CFGR3_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode */
/******************* Bit definition for DMA_CFG4 register *******************/
#define DMA_CFG4_EN ((uint16_t)0x0001) /* Channel enable */
#define DMA_CFG4_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */
#define DMA_CFG4_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */
#define DMA_CFG4_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */
#define DMA_CFG4_DIR ((uint16_t)0x0010) /* Data transfer direction */
#define DMA_CFG4_CIRC ((uint16_t)0x0020) /* Circular mode */
#define DMA_CFG4_PINC ((uint16_t)0x0040) /* Peripheral increment mode */
#define DMA_CFG4_MINC ((uint16_t)0x0080) /* Memory increment mode */
#define DMA_CFG4_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */
#define DMA_CFG4_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */
#define DMA_CFG4_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */
#define DMA_CFG4_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */
#define DMA_CFG4_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */
#define DMA_CFG4_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */
#define DMA_CFG4_PL ((uint16_t)0x3000) /* PL[1:0] bits (Channel Priority level) */
#define DMA_CFG4_PL_0 ((uint16_t)0x1000) /* Bit 0 */
#define DMA_CFG4_PL_1 ((uint16_t)0x2000) /* Bit 1 */
#define DMA_CFG4_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode */
/****************** Bit definition for DMA_CFG5 register *******************/
#define DMA_CFG5_EN ((uint16_t)0x0001) /* Channel enable */
#define DMA_CFG5_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */
#define DMA_CFG5_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */
#define DMA_CFG5_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */
#define DMA_CFG5_DIR ((uint16_t)0x0010) /* Data transfer direction */
#define DMA_CFG5_CIRC ((uint16_t)0x0020) /* Circular mode */
#define DMA_CFG5_PINC ((uint16_t)0x0040) /* Peripheral increment mode */
#define DMA_CFG5_MINC ((uint16_t)0x0080) /* Memory increment mode */
#define DMA_CFG5_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */
#define DMA_CFG5_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */
#define DMA_CFG5_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */
#define DMA_CFG5_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */
#define DMA_CFG5_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */
#define DMA_CFG5_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */
#define DMA_CFG5_PL ((uint16_t)0x3000) /* PL[1:0] bits (Channel Priority level) */
#define DMA_CFG5_PL_0 ((uint16_t)0x1000) /* Bit 0 */
#define DMA_CFG5_PL_1 ((uint16_t)0x2000) /* Bit 1 */
#define DMA_CFG5_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode enable */
/******************* Bit definition for DMA_CFG6 register *******************/
#define DMA_CFG6_EN ((uint16_t)0x0001) /* Channel enable */
#define DMA_CFG6_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */
#define DMA_CFG6_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */
#define DMA_CFG6_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */
#define DMA_CFG6_DIR ((uint16_t)0x0010) /* Data transfer direction */
#define DMA_CFG6_CIRC ((uint16_t)0x0020) /* Circular mode */
#define DMA_CFG6_PINC ((uint16_t)0x0040) /* Peripheral increment mode */
#define DMA_CFG6_MINC ((uint16_t)0x0080) /* Memory increment mode */
#define DMA_CFG6_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */
#define DMA_CFG6_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */
#define DMA_CFG6_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */
#define DMA_CFG6_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */
#define DMA_CFG6_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */
#define DMA_CFG6_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */
#define DMA_CFG6_PL ((uint16_t)0x3000) /* PL[1:0] bits (Channel Priority level) */
#define DMA_CFG6_PL_0 ((uint16_t)0x1000) /* Bit 0 */
#define DMA_CFG6_PL_1 ((uint16_t)0x2000) /* Bit 1 */
#define DMA_CFG6_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode */
/******************* Bit definition for DMA_CFG7 register *******************/
#define DMA_CFG7_EN ((uint16_t)0x0001) /* Channel enable */
#define DMA_CFG7_TCIE ((uint16_t)0x0002) /* Transfer complete interrupt enable */
#define DMA_CFG7_HTIE ((uint16_t)0x0004) /* Half Transfer interrupt enable */
#define DMA_CFG7_TEIE ((uint16_t)0x0008) /* Transfer error interrupt enable */
#define DMA_CFG7_DIR ((uint16_t)0x0010) /* Data transfer direction */
#define DMA_CFG7_CIRC ((uint16_t)0x0020) /* Circular mode */
#define DMA_CFG7_PINC ((uint16_t)0x0040) /* Peripheral increment mode */
#define DMA_CFG7_MINC ((uint16_t)0x0080) /* Memory increment mode */
#define DMA_CFG7_PSIZE ((uint16_t)0x0300) /* PSIZE[1:0] bits (Peripheral size) */
#define DMA_CFG7_PSIZE_0 ((uint16_t)0x0100) /* Bit 0 */
#define DMA_CFG7_PSIZE_1 ((uint16_t)0x0200) /* Bit 1 */
#define DMA_CFG7_MSIZE ((uint16_t)0x0C00) /* MSIZE[1:0] bits (Memory size) */
#define DMA_CFG7_MSIZE_0 ((uint16_t)0x0400) /* Bit 0 */
#define DMA_CFG7_MSIZE_1 ((uint16_t)0x0800) /* Bit 1 */
#define DMA_CFG7_PL ((uint16_t)0x3000) /* PL[1:0] bits (Channel Priority level) */
#define DMA_CFG7_PL_0 ((uint16_t)0x1000) /* Bit 0 */
#define DMA_CFG7_PL_1 ((uint16_t)0x2000) /* Bit 1 */
#define DMA_CFG7_MEM2MEM ((uint16_t)0x4000) /* Memory to memory mode enable */
/****************** Bit definition for DMA_CNTR1 register ******************/
#define DMA_CNTR1_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */
/****************** Bit definition for DMA_CNTR2 register ******************/
#define DMA_CNTR2_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */
/****************** Bit definition for DMA_CNTR3 register ******************/
#define DMA_CNTR3_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */
/****************** Bit definition for DMA_CNTR4 register ******************/
#define DMA_CNTR4_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */
/****************** Bit definition for DMA_CNTR5 register ******************/
#define DMA_CNTR5_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */
/****************** Bit definition for DMA_CNTR6 register ******************/
#define DMA_CNTR6_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */
/****************** Bit definition for DMA_CNTR7 register ******************/
#define DMA_CNTR7_NDT ((uint16_t)0xFFFF) /* Number of data to Transfer */
/****************** Bit definition for DMA_PADDR1 register *******************/
#define DMA_PADDR1_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */
/****************** Bit definition for DMA_PADDR2 register *******************/
#define DMA_PADDR2_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */
/****************** Bit definition for DMA_PADDR3 register *******************/
#define DMA_PADDR3_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */
/****************** Bit definition for DMA_PADDR4 register *******************/
#define DMA_PADDR4_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */
/****************** Bit definition for DMA_PADDR5 register *******************/
#define DMA_PADDR5_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */
/****************** Bit definition for DMA_PADDR6 register *******************/
#define DMA_PADDR6_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */
/****************** Bit definition for DMA_PADDR7 register *******************/
#define DMA_PADDR7_PA ((uint32_t)0xFFFFFFFF) /* Peripheral Address */
/****************** Bit definition for DMA_MADDR1 register *******************/
#define DMA_MADDR1_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */
/****************** Bit definition for DMA_MADDR2 register *******************/
#define DMA_MADDR2_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */
/****************** Bit definition for DMA_MADDR3 register *******************/
#define DMA_MADDR3_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */
/****************** Bit definition for DMA_MADDR4 register *******************/
#define DMA_MADDR4_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */
/****************** Bit definition for DMA_MADDR5 register *******************/
#define DMA_MADDR5_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */
/****************** Bit definition for DMA_MADDR6 register *******************/
#define DMA_MADDR6_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */
/****************** Bit definition for DMA_MADDR7 register *******************/
#define DMA_MADDR7_MA ((uint32_t)0xFFFFFFFF) /* Memory Address */
/******************************************************************************/
/* External Interrupt/Event Controller */
/******************************************************************************/
/******************* Bit definition for EXTI_INTENR register *******************/
#define EXTI_INTENR_MR0 ((uint32_t)0x00000001) /* Interrupt Mask on line 0 */
#define EXTI_INTENR_MR1 ((uint32_t)0x00000002) /* Interrupt Mask on line 1 */
#define EXTI_INTENR_MR2 ((uint32_t)0x00000004) /* Interrupt Mask on line 2 */
#define EXTI_INTENR_MR3 ((uint32_t)0x00000008) /* Interrupt Mask on line 3 */
#define EXTI_INTENR_MR4 ((uint32_t)0x00000010) /* Interrupt Mask on line 4 */
#define EXTI_INTENR_MR5 ((uint32_t)0x00000020) /* Interrupt Mask on line 5 */
#define EXTI_INTENR_MR6 ((uint32_t)0x00000040) /* Interrupt Mask on line 6 */
#define EXTI_INTENR_MR7 ((uint32_t)0x00000080) /* Interrupt Mask on line 7 */
#define EXTI_INTENR_MR8 ((uint32_t)0x00000100) /* Interrupt Mask on line 8 */
#define EXTI_INTENR_MR9 ((uint32_t)0x00000200) /* Interrupt Mask on line 9 */
/******************* Bit definition for EXTI_EVENR register *******************/
#define EXTI_EVENR_MR0 ((uint32_t)0x00000001) /* Event Mask on line 0 */
#define EXTI_EVENR_MR1 ((uint32_t)0x00000002) /* Event Mask on line 1 */
#define EXTI_EVENR_MR2 ((uint32_t)0x00000004) /* Event Mask on line 2 */
#define EXTI_EVENR_MR3 ((uint32_t)0x00000008) /* Event Mask on line 3 */
#define EXTI_EVENR_MR4 ((uint32_t)0x00000010) /* Event Mask on line 4 */
#define EXTI_EVENR_MR5 ((uint32_t)0x00000020) /* Event Mask on line 5 */
#define EXTI_EVENR_MR6 ((uint32_t)0x00000040) /* Event Mask on line 6 */
#define EXTI_EVENR_MR7 ((uint32_t)0x00000080) /* Event Mask on line 7 */
#define EXTI_EVENR_MR8 ((uint32_t)0x00000100) /* Event Mask on line 8 */
#define EXTI_EVENR_MR9 ((uint32_t)0x00000200) /* Event Mask on line 9 */
/****************** Bit definition for EXTI_RTENR register *******************/
#define EXTI_RTENR_TR0 ((uint32_t)0x00000001) /* Rising trigger event configuration bit of line 0 */
#define EXTI_RTENR_TR1 ((uint32_t)0x00000002) /* Rising trigger event configuration bit of line 1 */
#define EXTI_RTENR_TR2 ((uint32_t)0x00000004) /* Rising trigger event configuration bit of line 2 */
#define EXTI_RTENR_TR3 ((uint32_t)0x00000008) /* Rising trigger event configuration bit of line 3 */
#define EXTI_RTENR_TR4 ((uint32_t)0x00000010) /* Rising trigger event configuration bit of line 4 */
#define EXTI_RTENR_TR5 ((uint32_t)0x00000020) /* Rising trigger event configuration bit of line 5 */
#define EXTI_RTENR_TR6 ((uint32_t)0x00000040) /* Rising trigger event configuration bit of line 6 */
#define EXTI_RTENR_TR7 ((uint32_t)0x00000080) /* Rising trigger event configuration bit of line 7 */
#define EXTI_RTENR_TR8 ((uint32_t)0x00000100) /* Rising trigger event configuration bit of line 8 */
#define EXTI_RTENR_TR9 ((uint32_t)0x00000200) /* Rising trigger event configuration bit of line 9 */
/****************** Bit definition for EXTI_FTENR register *******************/
#define EXTI_FTENR_TR0 ((uint32_t)0x00000001) /* Falling trigger event configuration bit of line 0 */
#define EXTI_FTENR_TR1 ((uint32_t)0x00000002) /* Falling trigger event configuration bit of line 1 */
#define EXTI_FTENR_TR2 ((uint32_t)0x00000004) /* Falling trigger event configuration bit of line 2 */
#define EXTI_FTENR_TR3 ((uint32_t)0x00000008) /* Falling trigger event configuration bit of line 3 */
#define EXTI_FTENR_TR4 ((uint32_t)0x00000010) /* Falling trigger event configuration bit of line 4 */
#define EXTI_FTENR_TR5 ((uint32_t)0x00000020) /* Falling trigger event configuration bit of line 5 */
#define EXTI_FTENR_TR6 ((uint32_t)0x00000040) /* Falling trigger event configuration bit of line 6 */
#define EXTI_FTENR_TR7 ((uint32_t)0x00000080) /* Falling trigger event configuration bit of line 7 */
#define EXTI_FTENR_TR8 ((uint32_t)0x00000100) /* Falling trigger event configuration bit of line 8 */
#define EXTI_FTENR_TR9 ((uint32_t)0x00000200) /* Falling trigger event configuration bit of line 9 */
/****************** Bit definition for EXTI_SWIEVR register ******************/
#define EXTI_SWIEVR_SWIEVR0 ((uint32_t)0x00000001) /* Software Interrupt on line 0 */
#define EXTI_SWIEVR_SWIEVR1 ((uint32_t)0x00000002) /* Software Interrupt on line 1 */
#define EXTI_SWIEVR_SWIEVR2 ((uint32_t)0x00000004) /* Software Interrupt on line 2 */
#define EXTI_SWIEVR_SWIEVR3 ((uint32_t)0x00000008) /* Software Interrupt on line 3 */
#define EXTI_SWIEVR_SWIEVR4 ((uint32_t)0x00000010) /* Software Interrupt on line 4 */
#define EXTI_SWIEVR_SWIEVR5 ((uint32_t)0x00000020) /* Software Interrupt on line 5 */
#define EXTI_SWIEVR_SWIEVR6 ((uint32_t)0x00000040) /* Software Interrupt on line 6 */
#define EXTI_SWIEVR_SWIEVR7 ((uint32_t)0x00000080) /* Software Interrupt on line 7 */
#define EXTI_SWIEVR_SWIEVR8 ((uint32_t)0x00000100) /* Software Interrupt on line 8 */
#define EXTI_SWIEVR_SWIEVR9 ((uint32_t)0x00000200) /* Software Interrupt on line 9 */
/******************* Bit definition for EXTI_INTFR register ********************/
#define EXTI_INTF_INTF0 ((uint32_t)0x00000001) /* Pending bit for line 0 */
#define EXTI_INTF_INTF1 ((uint32_t)0x00000002) /* Pending bit for line 1 */
#define EXTI_INTF_INTF2 ((uint32_t)0x00000004) /* Pending bit for line 2 */
#define EXTI_INTF_INTF3 ((uint32_t)0x00000008) /* Pending bit for line 3 */
#define EXTI_INTF_INTF4 ((uint32_t)0x00000010) /* Pending bit for line 4 */
#define EXTI_INTF_INTF5 ((uint32_t)0x00000020) /* Pending bit for line 5 */
#define EXTI_INTF_INTF6 ((uint32_t)0x00000040) /* Pending bit for line 6 */
#define EXTI_INTF_INTF7 ((uint32_t)0x00000080) /* Pending bit for line 7 */
#define EXTI_INTF_INTF8 ((uint32_t)0x00000100) /* Pending bit for line 8 */
#define EXTI_INTF_INTF9 ((uint32_t)0x00000200) /* Pending bit for line 9 */
/******************************************************************************/
/* FLASH and Option Bytes Registers */
/******************************************************************************/
/******************* Bit definition for FLASH_ACTLR register ******************/
#define FLASH_ACTLR_LATENCY ((uint8_t)0x03) /* LATENCY[2:0] bits (Latency) */
#define FLASH_ACTLR_LATENCY_0 ((uint8_t)0x00) /* Bit 0 */
#define FLASH_ACTLR_LATENCY_1 ((uint8_t)0x01) /* Bit 0 */
#define FLASH_ACTLR_LATENCY_2 ((uint8_t)0x02) /* Bit 1 */
/****************** Bit definition for FLASH_KEYR register ******************/
#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /* FPEC Key */
/***************** Bit definition for FLASH_OBKEYR register ****************/
#define FLASH_OBKEYR_OBKEYR ((uint32_t)0xFFFFFFFF) /* Option Byte Key */
/****************** Bit definition for FLASH_STATR register *******************/
#define FLASH_STATR_BSY ((uint8_t)0x01) /* Busy */
#define FLASH_STATR_WRPRTERR ((uint8_t)0x10) /* Write Protection Error */
#define FLASH_STATR_EOP ((uint8_t)0x20) /* End of operation */
/******************* Bit definition for FLASH_CTLR register *******************/
#define FLASH_CTLR_PG ((uint16_t)0x0001) /* Programming */
#define FLASH_CTLR_PER ((uint16_t)0x0002) /* Page Erase 1KByte*/
#define FLASH_CTLR_MER ((uint16_t)0x0004) /* Mass Erase */
#define FLASH_CTLR_OPTPG ((uint16_t)0x0010) /* Option Byte Programming */
#define FLASH_CTLR_OPTER ((uint16_t)0x0020) /* Option Byte Erase */
#define FLASH_CTLR_STRT ((uint16_t)0x0040) /* Start */
#define FLASH_CTLR_LOCK ((uint16_t)0x0080) /* Lock */
#define FLASH_CTLR_OPTWRE ((uint16_t)0x0200) /* Option Bytes Write Enable */
#define FLASH_CTLR_ERRIE ((uint16_t)0x0400) /* Error Interrupt Enable */
#define FLASH_CTLR_EOPIE ((uint16_t)0x1000) /* End of operation interrupt enable */
#define FLASH_CTLR_PAGE_PG ((uint16_t)0x00010000) /* Page Programming 64Byte */
#define FLASH_CTLR_PAGE_ER ((uint16_t)0x00020000) /* Page Erase 64Byte */
#define FLASH_CTLR_BUF_LOAD ((uint16_t)0x00040000) /* Buffer Load */
#define FLASH_CTLR_BUF_RST ((uint16_t)0x00080000) /* Buffer Reset */
/******************* Bit definition for FLASH_ADDR register *******************/
#define FLASH_ADDR_FAR ((uint32_t)0xFFFFFFFF) /* Flash Address */
/****************** Bit definition for FLASH_OBR register *******************/
#define FLASH_OBR_OPTERR ((uint16_t)0x0001) /* Option Byte Error */
#define FLASH_OBR_RDPRT ((uint16_t)0x0002) /* Read protection */
#define FLASH_OBR_USER ((uint16_t)0x03FC) /* User Option Bytes */
#define FLASH_OBR_WDG_SW ((uint16_t)0x0004) /* WDG_SW */
#define FLASH_OBR_nRST_STOP ((uint16_t)0x0008) /* nRST_STOP */
#define FLASH_OBR_nRST_STDBY ((uint16_t)0x0010) /* nRST_STDBY */
#define FLASH_OBR_RST_MODE ((uint16_t)0x0060) /* RST_MODE */
/****************** Bit definition for FLASH_WPR register ******************/
#define FLASH_WPR_WRP ((uint32_t)0xFFFFFFFF) /* Write Protect */
/****************** Bit definition for FLASH_RDPR register *******************/
#define FLASH_RDPR_RDPR ((uint32_t)0x000000FF) /* Read protection option byte */
#define FLASH_RDPR_nRDPR ((uint32_t)0x0000FF00) /* Read protection complemented option byte */
/****************** Bit definition for FLASH_USER register ******************/
#define FLASH_USER_USER ((uint32_t)0x00FF0000) /* User option byte */
#define FLASH_USER_nUSER ((uint32_t)0xFF000000) /* User complemented option byte */
/****************** Bit definition for FLASH_Data0 register *****************/
#define FLASH_Data0_Data0 ((uint32_t)0x000000FF) /* User data storage option byte */
#define FLASH_Data0_nData0 ((uint32_t)0x0000FF00) /* User data storage complemented option byte */
/****************** Bit definition for FLASH_Data1 register *****************/
#define FLASH_Data1_Data1 ((uint32_t)0x00FF0000) /* User data storage option byte */
#define FLASH_Data1_nData1 ((uint32_t)0xFF000000) /* User data storage complemented option byte */
/****************** Bit definition for FLASH_WRPR0 register ******************/
#define FLASH_WRPR0_WRPR0 ((uint32_t)0x000000FF) /* Flash memory write protection option bytes */
#define FLASH_WRPR0_nWRPR0 ((uint32_t)0x0000FF00) /* Flash memory write protection complemented option bytes */
/****************** Bit definition for FLASH_WRPR1 register ******************/
#define FLASH_WRPR1_WRPR1 ((uint32_t)0x00FF0000) /* Flash memory write protection option bytes */
#define FLASH_WRPR1_nWRPR1 ((uint32_t)0xFF000000) /* Flash memory write protection complemented option bytes */
/******************************************************************************/
/* General Purpose and Alternate Function I/O */
/******************************************************************************/
/******************* Bit definition for GPIO_CFGLR register *******************/
#define GPIO_CFGLR_MODE ((uint32_t)0x33333333) /* Port x mode bits */
#define GPIO_CFGLR_MODE0 ((uint32_t)0x00000003) /* MODE0[1:0] bits (Port x mode bits, pin 0) */
#define GPIO_CFGLR_MODE0_0 ((uint32_t)0x00000001) /* Bit 0 */
#define GPIO_CFGLR_MODE0_1 ((uint32_t)0x00000002) /* Bit 1 */
#define GPIO_CFGLR_MODE1 ((uint32_t)0x00000030) /* MODE1[1:0] bits (Port x mode bits, pin 1) */
#define GPIO_CFGLR_MODE1_0 ((uint32_t)0x00000010) /* Bit 0 */
#define GPIO_CFGLR_MODE1_1 ((uint32_t)0x00000020) /* Bit 1 */
#define GPIO_CFGLR_MODE2 ((uint32_t)0x00000300) /* MODE2[1:0] bits (Port x mode bits, pin 2) */
#define GPIO_CFGLR_MODE2_0 ((uint32_t)0x00000100) /* Bit 0 */
#define GPIO_CFGLR_MODE2_1 ((uint32_t)0x00000200) /* Bit 1 */
#define GPIO_CFGLR_MODE3 ((uint32_t)0x00003000) /* MODE3[1:0] bits (Port x mode bits, pin 3) */
#define GPIO_CFGLR_MODE3_0 ((uint32_t)0x00001000) /* Bit 0 */
#define GPIO_CFGLR_MODE3_1 ((uint32_t)0x00002000) /* Bit 1 */
#define GPIO_CFGLR_MODE4 ((uint32_t)0x00030000) /* MODE4[1:0] bits (Port x mode bits, pin 4) */
#define GPIO_CFGLR_MODE4_0 ((uint32_t)0x00010000) /* Bit 0 */
#define GPIO_CFGLR_MODE4_1 ((uint32_t)0x00020000) /* Bit 1 */
#define GPIO_CFGLR_MODE5 ((uint32_t)0x00300000) /* MODE5[1:0] bits (Port x mode bits, pin 5) */
#define GPIO_CFGLR_MODE5_0 ((uint32_t)0x00100000) /* Bit 0 */
#define GPIO_CFGLR_MODE5_1 ((uint32_t)0x00200000) /* Bit 1 */
#define GPIO_CFGLR_MODE6 ((uint32_t)0x03000000) /* MODE6[1:0] bits (Port x mode bits, pin 6) */
#define GPIO_CFGLR_MODE6_0 ((uint32_t)0x01000000) /* Bit 0 */
#define GPIO_CFGLR_MODE6_1 ((uint32_t)0x02000000) /* Bit 1 */
#define GPIO_CFGLR_MODE7 ((uint32_t)0x30000000) /* MODE7[1:0] bits (Port x mode bits, pin 7) */
#define GPIO_CFGLR_MODE7_0 ((uint32_t)0x10000000) /* Bit 0 */
#define GPIO_CFGLR_MODE7_1 ((uint32_t)0x20000000) /* Bit 1 */
#define GPIO_CFGLR_CNF ((uint32_t)0xCCCCCCCC) /* Port x configuration bits */
#define GPIO_CFGLR_CNF0 ((uint32_t)0x0000000C) /* CNF0[1:0] bits (Port x configuration bits, pin 0) */
#define GPIO_CFGLR_CNF0_0 ((uint32_t)0x00000004) /* Bit 0 */
#define GPIO_CFGLR_CNF0_1 ((uint32_t)0x00000008) /* Bit 1 */
#define GPIO_CFGLR_CNF1 ((uint32_t)0x000000C0) /* CNF1[1:0] bits (Port x configuration bits, pin 1) */
#define GPIO_CFGLR_CNF1_0 ((uint32_t)0x00000040) /* Bit 0 */
#define GPIO_CFGLR_CNF1_1 ((uint32_t)0x00000080) /* Bit 1 */
#define GPIO_CFGLR_CNF2 ((uint32_t)0x00000C00) /* CNF2[1:0] bits (Port x configuration bits, pin 2) */
#define GPIO_CFGLR_CNF2_0 ((uint32_t)0x00000400) /* Bit 0 */
#define GPIO_CFGLR_CNF2_1 ((uint32_t)0x00000800) /* Bit 1 */
#define GPIO_CFGLR_CNF3 ((uint32_t)0x0000C000) /* CNF3[1:0] bits (Port x configuration bits, pin 3) */
#define GPIO_CFGLR_CNF3_0 ((uint32_t)0x00004000) /* Bit 0 */
#define GPIO_CFGLR_CNF3_1 ((uint32_t)0x00008000) /* Bit 1 */
#define GPIO_CFGLR_CNF4 ((uint32_t)0x000C0000) /* CNF4[1:0] bits (Port x configuration bits, pin 4) */
#define GPIO_CFGLR_CNF4_0 ((uint32_t)0x00040000) /* Bit 0 */
#define GPIO_CFGLR_CNF4_1 ((uint32_t)0x00080000) /* Bit 1 */
#define GPIO_CFGLR_CNF5 ((uint32_t)0x00C00000) /* CNF5[1:0] bits (Port x configuration bits, pin 5) */
#define GPIO_CFGLR_CNF5_0 ((uint32_t)0x00400000) /* Bit 0 */
#define GPIO_CFGLR_CNF5_1 ((uint32_t)0x00800000) /* Bit 1 */
#define GPIO_CFGLR_CNF6 ((uint32_t)0x0C000000) /* CNF6[1:0] bits (Port x configuration bits, pin 6) */
#define GPIO_CFGLR_CNF6_0 ((uint32_t)0x04000000) /* Bit 0 */
#define GPIO_CFGLR_CNF6_1 ((uint32_t)0x08000000) /* Bit 1 */
#define GPIO_CFGLR_CNF7 ((uint32_t)0xC0000000) /* CNF7[1:0] bits (Port x configuration bits, pin 7) */
#define GPIO_CFGLR_CNF7_0 ((uint32_t)0x40000000) /* Bit 0 */
#define GPIO_CFGLR_CNF7_1 ((uint32_t)0x80000000) /* Bit 1 */
/******************* Bit definition for GPIO_CFGHR register *******************/
#define GPIO_CFGHR_MODE ((uint32_t)0x33333333) /* Port x mode bits */
#define GPIO_CFGHR_MODE8 ((uint32_t)0x00000003) /* MODE8[1:0] bits (Port x mode bits, pin 8) */
#define GPIO_CFGHR_MODE8_0 ((uint32_t)0x00000001) /* Bit 0 */
#define GPIO_CFGHR_MODE8_1 ((uint32_t)0x00000002) /* Bit 1 */
#define GPIO_CFGHR_MODE9 ((uint32_t)0x00000030) /* MODE9[1:0] bits (Port x mode bits, pin 9) */
#define GPIO_CFGHR_MODE9_0 ((uint32_t)0x00000010) /* Bit 0 */
#define GPIO_CFGHR_MODE9_1 ((uint32_t)0x00000020) /* Bit 1 */
#define GPIO_CFGHR_MODE10 ((uint32_t)0x00000300) /* MODE10[1:0] bits (Port x mode bits, pin 10) */
#define GPIO_CFGHR_MODE10_0 ((uint32_t)0x00000100) /* Bit 0 */
#define GPIO_CFGHR_MODE10_1 ((uint32_t)0x00000200) /* Bit 1 */
#define GPIO_CFGHR_MODE11 ((uint32_t)0x00003000) /* MODE11[1:0] bits (Port x mode bits, pin 11) */
#define GPIO_CFGHR_MODE11_0 ((uint32_t)0x00001000) /* Bit 0 */
#define GPIO_CFGHR_MODE11_1 ((uint32_t)0x00002000) /* Bit 1 */
#define GPIO_CFGHR_MODE12 ((uint32_t)0x00030000) /* MODE12[1:0] bits (Port x mode bits, pin 12) */
#define GPIO_CFGHR_MODE12_0 ((uint32_t)0x00010000) /* Bit 0 */
#define GPIO_CFGHR_MODE12_1 ((uint32_t)0x00020000) /* Bit 1 */
#define GPIO_CFGHR_MODE13 ((uint32_t)0x00300000) /* MODE13[1:0] bits (Port x mode bits, pin 13) */
#define GPIO_CFGHR_MODE13_0 ((uint32_t)0x00100000) /* Bit 0 */
#define GPIO_CFGHR_MODE13_1 ((uint32_t)0x00200000) /* Bit 1 */
#define GPIO_CFGHR_MODE14 ((uint32_t)0x03000000) /* MODE14[1:0] bits (Port x mode bits, pin 14) */
#define GPIO_CFGHR_MODE14_0 ((uint32_t)0x01000000) /* Bit 0 */
#define GPIO_CFGHR_MODE14_1 ((uint32_t)0x02000000) /* Bit 1 */
#define GPIO_CFGHR_MODE15 ((uint32_t)0x30000000) /* MODE15[1:0] bits (Port x mode bits, pin 15) */
#define GPIO_CFGHR_MODE15_0 ((uint32_t)0x10000000) /* Bit 0 */
#define GPIO_CFGHR_MODE15_1 ((uint32_t)0x20000000) /* Bit 1 */
#define GPIO_CFGHR_CNF ((uint32_t)0xCCCCCCCC) /* Port x configuration bits */
#define GPIO_CFGHR_CNF8 ((uint32_t)0x0000000C) /* CNF8[1:0] bits (Port x configuration bits, pin 8) */
#define GPIO_CFGHR_CNF8_0 ((uint32_t)0x00000004) /* Bit 0 */
#define GPIO_CFGHR_CNF8_1 ((uint32_t)0x00000008) /* Bit 1 */
#define GPIO_CFGHR_CNF9 ((uint32_t)0x000000C0) /* CNF9[1:0] bits (Port x configuration bits, pin 9) */
#define GPIO_CFGHR_CNF9_0 ((uint32_t)0x00000040) /* Bit 0 */
#define GPIO_CFGHR_CNF9_1 ((uint32_t)0x00000080) /* Bit 1 */
#define GPIO_CFGHR_CNF10 ((uint32_t)0x00000C00) /* CNF10[1:0] bits (Port x configuration bits, pin 10) */
#define GPIO_CFGHR_CNF10_0 ((uint32_t)0x00000400) /* Bit 0 */
#define GPIO_CFGHR_CNF10_1 ((uint32_t)0x00000800) /* Bit 1 */
#define GPIO_CFGHR_CNF11 ((uint32_t)0x0000C000) /* CNF11[1:0] bits (Port x configuration bits, pin 11) */
#define GPIO_CFGHR_CNF11_0 ((uint32_t)0x00004000) /* Bit 0 */
#define GPIO_CFGHR_CNF11_1 ((uint32_t)0x00008000) /* Bit 1 */
#define GPIO_CFGHR_CNF12 ((uint32_t)0x000C0000) /* CNF12[1:0] bits (Port x configuration bits, pin 12) */
#define GPIO_CFGHR_CNF12_0 ((uint32_t)0x00040000) /* Bit 0 */
#define GPIO_CFGHR_CNF12_1 ((uint32_t)0x00080000) /* Bit 1 */
#define GPIO_CFGHR_CNF13 ((uint32_t)0x00C00000) /* CNF13[1:0] bits (Port x configuration bits, pin 13) */
#define GPIO_CFGHR_CNF13_0 ((uint32_t)0x00400000) /* Bit 0 */
#define GPIO_CFGHR_CNF13_1 ((uint32_t)0x00800000) /* Bit 1 */
#define GPIO_CFGHR_CNF14 ((uint32_t)0x0C000000) /* CNF14[1:0] bits (Port x configuration bits, pin 14) */
#define GPIO_CFGHR_CNF14_0 ((uint32_t)0x04000000) /* Bit 0 */
#define GPIO_CFGHR_CNF14_1 ((uint32_t)0x08000000) /* Bit 1 */
#define GPIO_CFGHR_CNF15 ((uint32_t)0xC0000000) /* CNF15[1:0] bits (Port x configuration bits, pin 15) */
#define GPIO_CFGHR_CNF15_0 ((uint32_t)0x40000000) /* Bit 0 */
#define GPIO_CFGHR_CNF15_1 ((uint32_t)0x80000000) /* Bit 1 */
/******************* Bit definition for GPIO_INDR register *******************/
#define GPIO_INDR_IDR0 ((uint16_t)0x0001) /* Port input data, bit 0 */
#define GPIO_INDR_IDR1 ((uint16_t)0x0002) /* Port input data, bit 1 */
#define GPIO_INDR_IDR2 ((uint16_t)0x0004) /* Port input data, bit 2 */
#define GPIO_INDR_IDR3 ((uint16_t)0x0008) /* Port input data, bit 3 */
#define GPIO_INDR_IDR4 ((uint16_t)0x0010) /* Port input data, bit 4 */
#define GPIO_INDR_IDR5 ((uint16_t)0x0020) /* Port input data, bit 5 */
#define GPIO_INDR_IDR6 ((uint16_t)0x0040) /* Port input data, bit 6 */
#define GPIO_INDR_IDR7 ((uint16_t)0x0080) /* Port input data, bit 7 */
#define GPIO_INDR_IDR8 ((uint16_t)0x0100) /* Port input data, bit 8 */
#define GPIO_INDR_IDR9 ((uint16_t)0x0200) /* Port input data, bit 9 */
#define GPIO_INDR_IDR10 ((uint16_t)0x0400) /* Port input data, bit 10 */
#define GPIO_INDR_IDR11 ((uint16_t)0x0800) /* Port input data, bit 11 */
#define GPIO_INDR_IDR12 ((uint16_t)0x1000) /* Port input data, bit 12 */
#define GPIO_INDR_IDR13 ((uint16_t)0x2000) /* Port input data, bit 13 */
#define GPIO_INDR_IDR14 ((uint16_t)0x4000) /* Port input data, bit 14 */
#define GPIO_INDR_IDR15 ((uint16_t)0x8000) /* Port input data, bit 15 */
/******************* Bit definition for GPIO_OUTDR register *******************/
#define GPIO_OUTDR_ODR0 ((uint16_t)0x0001) /* Port output data, bit 0 */
#define GPIO_OUTDR_ODR1 ((uint16_t)0x0002) /* Port output data, bit 1 */
#define GPIO_OUTDR_ODR2 ((uint16_t)0x0004) /* Port output data, bit 2 */
#define GPIO_OUTDR_ODR3 ((uint16_t)0x0008) /* Port output data, bit 3 */
#define GPIO_OUTDR_ODR4 ((uint16_t)0x0010) /* Port output data, bit 4 */
#define GPIO_OUTDR_ODR5 ((uint16_t)0x0020) /* Port output data, bit 5 */
#define GPIO_OUTDR_ODR6 ((uint16_t)0x0040) /* Port output data, bit 6 */
#define GPIO_OUTDR_ODR7 ((uint16_t)0x0080) /* Port output data, bit 7 */
#define GPIO_OUTDR_ODR8 ((uint16_t)0x0100) /* Port output data, bit 8 */
#define GPIO_OUTDR_ODR9 ((uint16_t)0x0200) /* Port output data, bit 9 */
#define GPIO_OUTDR_ODR10 ((uint16_t)0x0400) /* Port output data, bit 10 */
#define GPIO_OUTDR_ODR11 ((uint16_t)0x0800) /* Port output data, bit 11 */
#define GPIO_OUTDR_ODR12 ((uint16_t)0x1000) /* Port output data, bit 12 */
#define GPIO_OUTDR_ODR13 ((uint16_t)0x2000) /* Port output data, bit 13 */
#define GPIO_OUTDR_ODR14 ((uint16_t)0x4000) /* Port output data, bit 14 */
#define GPIO_OUTDR_ODR15 ((uint16_t)0x8000) /* Port output data, bit 15 */
/****************** Bit definition for GPIO_BSHR register *******************/
#define GPIO_BSHR_BS0 ((uint32_t)0x00000001) /* Port x Set bit 0 */
#define GPIO_BSHR_BS1 ((uint32_t)0x00000002) /* Port x Set bit 1 */
#define GPIO_BSHR_BS2 ((uint32_t)0x00000004) /* Port x Set bit 2 */
#define GPIO_BSHR_BS3 ((uint32_t)0x00000008) /* Port x Set bit 3 */
#define GPIO_BSHR_BS4 ((uint32_t)0x00000010) /* Port x Set bit 4 */
#define GPIO_BSHR_BS5 ((uint32_t)0x00000020) /* Port x Set bit 5 */
#define GPIO_BSHR_BS6 ((uint32_t)0x00000040) /* Port x Set bit 6 */
#define GPIO_BSHR_BS7 ((uint32_t)0x00000080) /* Port x Set bit 7 */
#define GPIO_BSHR_BS8 ((uint32_t)0x00000100) /* Port x Set bit 8 */
#define GPIO_BSHR_BS9 ((uint32_t)0x00000200) /* Port x Set bit 9 */
#define GPIO_BSHR_BS10 ((uint32_t)0x00000400) /* Port x Set bit 10 */
#define GPIO_BSHR_BS11 ((uint32_t)0x00000800) /* Port x Set bit 11 */
#define GPIO_BSHR_BS12 ((uint32_t)0x00001000) /* Port x Set bit 12 */
#define GPIO_BSHR_BS13 ((uint32_t)0x00002000) /* Port x Set bit 13 */
#define GPIO_BSHR_BS14 ((uint32_t)0x00004000) /* Port x Set bit 14 */
#define GPIO_BSHR_BS15 ((uint32_t)0x00008000) /* Port x Set bit 15 */
#define GPIO_BSHR_BR0 ((uint32_t)0x00010000) /* Port x Reset bit 0 */
#define GPIO_BSHR_BR1 ((uint32_t)0x00020000) /* Port x Reset bit 1 */
#define GPIO_BSHR_BR2 ((uint32_t)0x00040000) /* Port x Reset bit 2 */
#define GPIO_BSHR_BR3 ((uint32_t)0x00080000) /* Port x Reset bit 3 */
#define GPIO_BSHR_BR4 ((uint32_t)0x00100000) /* Port x Reset bit 4 */
#define GPIO_BSHR_BR5 ((uint32_t)0x00200000) /* Port x Reset bit 5 */
#define GPIO_BSHR_BR6 ((uint32_t)0x00400000) /* Port x Reset bit 6 */
#define GPIO_BSHR_BR7 ((uint32_t)0x00800000) /* Port x Reset bit 7 */
#define GPIO_BSHR_BR8 ((uint32_t)0x01000000) /* Port x Reset bit 8 */
#define GPIO_BSHR_BR9 ((uint32_t)0x02000000) /* Port x Reset bit 9 */
#define GPIO_BSHR_BR10 ((uint32_t)0x04000000) /* Port x Reset bit 10 */
#define GPIO_BSHR_BR11 ((uint32_t)0x08000000) /* Port x Reset bit 11 */
#define GPIO_BSHR_BR12 ((uint32_t)0x10000000) /* Port x Reset bit 12 */
#define GPIO_BSHR_BR13 ((uint32_t)0x20000000) /* Port x Reset bit 13 */
#define GPIO_BSHR_BR14 ((uint32_t)0x40000000) /* Port x Reset bit 14 */
#define GPIO_BSHR_BR15 ((uint32_t)0x80000000) /* Port x Reset bit 15 */
/******************* Bit definition for GPIO_BCR register *******************/
#define GPIO_BCR_BR0 ((uint16_t)0x0001) /* Port x Reset bit 0 */
#define GPIO_BCR_BR1 ((uint16_t)0x0002) /* Port x Reset bit 1 */
#define GPIO_BCR_BR2 ((uint16_t)0x0004) /* Port x Reset bit 2 */
#define GPIO_BCR_BR3 ((uint16_t)0x0008) /* Port x Reset bit 3 */
#define GPIO_BCR_BR4 ((uint16_t)0x0010) /* Port x Reset bit 4 */
#define GPIO_BCR_BR5 ((uint16_t)0x0020) /* Port x Reset bit 5 */
#define GPIO_BCR_BR6 ((uint16_t)0x0040) /* Port x Reset bit 6 */
#define GPIO_BCR_BR7 ((uint16_t)0x0080) /* Port x Reset bit 7 */
#define GPIO_BCR_BR8 ((uint16_t)0x0100) /* Port x Reset bit 8 */
#define GPIO_BCR_BR9 ((uint16_t)0x0200) /* Port x Reset bit 9 */
#define GPIO_BCR_BR10 ((uint16_t)0x0400) /* Port x Reset bit 10 */
#define GPIO_BCR_BR11 ((uint16_t)0x0800) /* Port x Reset bit 11 */
#define GPIO_BCR_BR12 ((uint16_t)0x1000) /* Port x Reset bit 12 */
#define GPIO_BCR_BR13 ((uint16_t)0x2000) /* Port x Reset bit 13 */
#define GPIO_BCR_BR14 ((uint16_t)0x4000) /* Port x Reset bit 14 */
#define GPIO_BCR_BR15 ((uint16_t)0x8000) /* Port x Reset bit 15 */
/****************** Bit definition for GPIO_LCKR register *******************/
#define GPIO_LCK0 ((uint32_t)0x00000001) /* Port x Lock bit 0 */
#define GPIO_LCK1 ((uint32_t)0x00000002) /* Port x Lock bit 1 */
#define GPIO_LCK2 ((uint32_t)0x00000004) /* Port x Lock bit 2 */
#define GPIO_LCK3 ((uint32_t)0x00000008) /* Port x Lock bit 3 */
#define GPIO_LCK4 ((uint32_t)0x00000010) /* Port x Lock bit 4 */
#define GPIO_LCK5 ((uint32_t)0x00000020) /* Port x Lock bit 5 */
#define GPIO_LCK6 ((uint32_t)0x00000040) /* Port x Lock bit 6 */
#define GPIO_LCK7 ((uint32_t)0x00000080) /* Port x Lock bit 7 */
#define GPIO_LCK8 ((uint32_t)0x00000100) /* Port x Lock bit 8 */
#define GPIO_LCK9 ((uint32_t)0x00000200) /* Port x Lock bit 9 */
#define GPIO_LCK10 ((uint32_t)0x00000400) /* Port x Lock bit 10 */
#define GPIO_LCK11 ((uint32_t)0x00000800) /* Port x Lock bit 11 */
#define GPIO_LCK12 ((uint32_t)0x00001000) /* Port x Lock bit 12 */
#define GPIO_LCK13 ((uint32_t)0x00002000) /* Port x Lock bit 13 */
#define GPIO_LCK14 ((uint32_t)0x00004000) /* Port x Lock bit 14 */
#define GPIO_LCK15 ((uint32_t)0x00008000) /* Port x Lock bit 15 */
#define GPIO_LCKK ((uint32_t)0x00010000) /* Lock key */
/****************** Bit definition for AFIO_PCFR1register *******************/
#define AFIO_PCFR1_SPI1_REMAP ((uint32_t)0x00000001) /* SPI1 remapping */
#define AFIO_PCFR1_I2C1_REMAP ((uint32_t)0x00000002) /* I2C1 remapping */
#define AFIO_PCFR1_USART1_REMAP ((uint32_t)0x00000004) /* USART1 remapping */
#define AFIO_PCFR1_USART2_REMAP ((uint32_t)0x00000008) /* USART2 remapping */
#define AFIO_PCFR1_USART3_REMAP ((uint32_t)0x00000030) /* USART3_REMAP[1:0] bits (USART3 remapping) */
#define AFIO_PCFR1_USART3_REMAP_0 ((uint32_t)0x00000010) /* Bit 0 */
#define AFIO_PCFR1_USART3_REMAP_1 ((uint32_t)0x00000020) /* Bit 1 */
#define AFIO_PCFR1_USART3_REMAP_NOREMAP ((uint32_t)0x00000000) /* No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */
#define AFIO_PCFR1_USART3_REMAP_PARTIALREMAP ((uint32_t)0x00000010) /* Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */
#define AFIO_PCFR1_USART3_REMAP_FULLREMAP ((uint32_t)0x00000030) /* Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */
#define AFIO_PCFR1_TIM1_REMAP ((uint32_t)0x000000C0) /* TIM1_REMAP[1:0] bits (TIM1 remapping) */
#define AFIO_PCFR1_TIM1_REMAP_0 ((uint32_t)0x00000040) /* Bit 0 */
#define AFIO_PCFR1_TIM1_REMAP_1 ((uint32_t)0x00000080) /* Bit 1 */
#define AFIO_PCFR1_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /* No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */
#define AFIO_PCFR1_TIM1_REMAP_PARTIALREMAP ((uint32_t)0x00000040) /* Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */
#define AFIO_PCFR1_TIM1_REMAP_FULLREMAP ((uint32_t)0x000000C0) /* Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */
#define AFIO_PCFR1_TIM2_REMAP ((uint32_t)0x00000300) /* TIM2_REMAP[1:0] bits (TIM2 remapping) */
#define AFIO_PCFR1_TIM2_REMAP_0 ((uint32_t)0x00000100) /* Bit 0 */
#define AFIO_PCFR1_TIM2_REMAP_1 ((uint32_t)0x00000200) /* Bit 1 */
#define AFIO_PCFR1_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /* No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */
#define AFIO_PCFR1_TIM2_REMAP_PARTIALREMAP1 ((uint32_t)0x00000100) /* Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */
#define AFIO_PCFR1_TIM2_REMAP_PARTIALREMAP2 ((uint32_t)0x00000200) /* Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */
#define AFIO_PCFR1_TIM2_REMAP_FULLREMAP ((uint32_t)0x00000300) /* Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */
#define AFIO_PCFR1_TIM3_REMAP ((uint32_t)0x00000C00) /* TIM3_REMAP[1:0] bits (TIM3 remapping) */
#define AFIO_PCFR1_TIM3_REMAP_0 ((uint32_t)0x00000400) /* Bit 0 */
#define AFIO_PCFR1_TIM3_REMAP_1 ((uint32_t)0x00000800) /* Bit 1 */
#define AFIO_PCFR1_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /* No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */
#define AFIO_PCFR1_TIM3_REMAP_PARTIALREMAP ((uint32_t)0x00000800) /* Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */
#define AFIO_PCFR1_TIM3_REMAP_FULLREMAP ((uint32_t)0x00000C00) /* Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */
#define AFIO_PCFR1_TIM4_REMAP ((uint32_t)0x00001000) /* TIM4_REMAP bit (TIM4 remapping) */
#define AFIO_PCFR1_CAN_REMAP ((uint32_t)0x00006000) /* CAN_REMAP[1:0] bits (CAN Alternate function remapping) */
#define AFIO_PCFR1_CAN_REMAP_0 ((uint32_t)0x00002000) /* Bit 0 */
#define AFIO_PCFR1_CAN_REMAP_1 ((uint32_t)0x00004000) /* Bit 1 */
#define AFIO_PCFR1_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /* CANRX mapped to PA11, CANTX mapped to PA12 */
#define AFIO_PCFR1_CAN_REMAP_REMAP2 ((uint32_t)0x00004000) /* CANRX mapped to PB8, CANTX mapped to PB9 */
#define AFIO_PCFR1_CAN_REMAP_REMAP3 ((uint32_t)0x00006000) /* CANRX mapped to PD0, CANTX mapped to PD1 */
#define AFIO_PCFR1_PA12_REMAP ((uint32_t)0x00008000) /* Port D0/Port D1 mapping on OSC_IN/OSC_OUT */
#define AFIO_PCFR1_TIM5CH4_IREMAP ((uint32_t)0x00010000) /* TIM5 Channel4 Internal Remap */
#define AFIO_PCFR1_ADC1_ETRGINJ_REMAP ((uint32_t)0x00020000) /* ADC 1 External Trigger Injected Conversion remapping */
#define AFIO_PCFR1_ADC1_ETRGREG_REMAP ((uint32_t)0x00040000) /* ADC 1 External Trigger Regular Conversion remapping */
#define AFIO_PCFR1_ADC2_ETRGINJ_REMAP ((uint32_t)0x00080000) /* ADC 2 External Trigger Injected Conversion remapping */
#define AFIO_PCFR1_ADC2_ETRGREG_REMAP ((uint32_t)0x00100000) /* ADC 2 External Trigger Regular Conversion remapping */
#define AFIO_PCFR1_SWJ_CFG ((uint32_t)0x07000000) /* SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */
#define AFIO_PCFR1_SWJ_CFG_0 ((uint32_t)0x01000000) /* Bit 0 */
#define AFIO_PCFR1_SWJ_CFG_1 ((uint32_t)0x02000000) /* Bit 1 */
#define AFIO_PCFR1_SWJ_CFG_2 ((uint32_t)0x04000000) /* Bit 2 */
#define AFIO_PCFR1_SWJ_CFG_RESET ((uint32_t)0x00000000) /* Full SWJ (JTAG-DP + SW-DP) : Reset State */
#define AFIO_PCFR1_SWJ_CFG_NOJNTRST ((uint32_t)0x01000000) /* Full SWJ (JTAG-DP + SW-DP) but without JNTRST */
#define AFIO_PCFR1_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) /* JTAG-DP Disabled and SW-DP Enabled */
#define AFIO_PCFR1_SWJ_CFG_DISABLE ((uint32_t)0x04000000) /* JTAG-DP Disabled and SW-DP Disabled */
/***************** Bit definition for AFIO_EXTICR1 register *****************/
#define AFIO_EXTICR1_EXTI0 ((uint16_t)0x000F) /* EXTI 0 configuration */
#define AFIO_EXTICR1_EXTI1 ((uint16_t)0x00F0) /* EXTI 1 configuration */
#define AFIO_EXTICR1_EXTI2 ((uint16_t)0x0F00) /* EXTI 2 configuration */
#define AFIO_EXTICR1_EXTI3 ((uint16_t)0xF000) /* EXTI 3 configuration */
#define AFIO_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /* PA[0] pin */
#define AFIO_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /* PB[0] pin */
#define AFIO_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /* PC[0] pin */
#define AFIO_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /* PD[0] pin */
#define AFIO_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /* PE[0] pin */
#define AFIO_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /* PF[0] pin */
#define AFIO_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /* PG[0] pin */
#define AFIO_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /* PA[1] pin */
#define AFIO_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /* PB[1] pin */
#define AFIO_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /* PC[1] pin */
#define AFIO_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /* PD[1] pin */
#define AFIO_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /* PE[1] pin */
#define AFIO_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /* PF[1] pin */
#define AFIO_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /* PG[1] pin */
#define AFIO_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /* PA[2] pin */
#define AFIO_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /* PB[2] pin */
#define AFIO_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /* PC[2] pin */
#define AFIO_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /* PD[2] pin */
#define AFIO_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /* PE[2] pin */
#define AFIO_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /* PF[2] pin */
#define AFIO_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /* PG[2] pin */
#define AFIO_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /* PA[3] pin */
#define AFIO_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /* PB[3] pin */
#define AFIO_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /* PC[3] pin */
#define AFIO_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /* PD[3] pin */
#define AFIO_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /* PE[3] pin */
#define AFIO_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /* PF[3] pin */
#define AFIO_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /* PG[3] pin */
/******************************************************************************/
/* Independent WATCHDOG */
/******************************************************************************/
/******************* Bit definition for IWDG_CTLR register ********************/
#define IWDG_KEY ((uint16_t)0xFFFF) /* Key value (write only, read 0000h) */
/******************* Bit definition for IWDG_PSCR register ********************/
#define IWDG_PR ((uint8_t)0x07) /* PR[2:0] (Prescaler divider) */
#define IWDG_PR_0 ((uint8_t)0x01) /* Bit 0 */
#define IWDG_PR_1 ((uint8_t)0x02) /* Bit 1 */
#define IWDG_PR_2 ((uint8_t)0x04) /* Bit 2 */
/******************* Bit definition for IWDG_RLDR register *******************/
#define IWDG_RL ((uint16_t)0x0FFF) /* Watchdog counter reload value */
/******************* Bit definition for IWDG_STATR register ********************/
#define IWDG_PVU ((uint8_t)0x01) /* Watchdog prescaler value update */
#define IWDG_RVU ((uint8_t)0x02) /* Watchdog counter reload value update */
/******************************************************************************/
/* Inter-integrated Circuit Interface */
/******************************************************************************/
/******************* Bit definition for I2C_CTLR1 register ********************/
#define I2C_CTLR1_PE ((uint16_t)0x0001) /* Peripheral Enable */
#define I2C_CTLR1_SMBUS ((uint16_t)0x0002) /* SMBus Mode */
#define I2C_CTLR1_SMBTYPE ((uint16_t)0x0008) /* SMBus Type */
#define I2C_CTLR1_ENARP ((uint16_t)0x0010) /* ARP Enable */
#define I2C_CTLR1_ENPEC ((uint16_t)0x0020) /* PEC Enable */
#define I2C_CTLR1_ENGC ((uint16_t)0x0040) /* General Call Enable */
#define I2C_CTLR1_NOSTRETCH ((uint16_t)0x0080) /* Clock Stretching Disable (Slave mode) */
#define I2C_CTLR1_START ((uint16_t)0x0100) /* Start Generation */
#define I2C_CTLR1_STOP ((uint16_t)0x0200) /* Stop Generation */
#define I2C_CTLR1_ACK ((uint16_t)0x0400) /* Acknowledge Enable */
#define I2C_CTLR1_POS ((uint16_t)0x0800) /* Acknowledge/PEC Position (for data reception) */
#define I2C_CTLR1_PEC ((uint16_t)0x1000) /* Packet Error Checking */
#define I2C_CTLR1_ALERT ((uint16_t)0x2000) /* SMBus Alert */
#define I2C_CTLR1_SWRST ((uint16_t)0x8000) /* Software Reset */
/******************* Bit definition for I2C_CTLR2 register ********************/
#define I2C_CTLR2_FREQ ((uint16_t)0x003F) /* FREQ[5:0] bits (Peripheral Clock Frequency) */
#define I2C_CTLR2_FREQ_0 ((uint16_t)0x0001) /* Bit 0 */
#define I2C_CTLR2_FREQ_1 ((uint16_t)0x0002) /* Bit 1 */
#define I2C_CTLR2_FREQ_2 ((uint16_t)0x0004) /* Bit 2 */
#define I2C_CTLR2_FREQ_3 ((uint16_t)0x0008) /* Bit 3 */
#define I2C_CTLR2_FREQ_4 ((uint16_t)0x0010) /* Bit 4 */
#define I2C_CTLR2_FREQ_5 ((uint16_t)0x0020) /* Bit 5 */
#define I2C_CTLR2_ITERREN ((uint16_t)0x0100) /* Error Interrupt Enable */
#define I2C_CTLR2_ITEVTEN ((uint16_t)0x0200) /* Event Interrupt Enable */
#define I2C_CTLR2_ITBUFEN ((uint16_t)0x0400) /* Buffer Interrupt Enable */
#define I2C_CTLR2_DMAEN ((uint16_t)0x0800) /* DMA Requests Enable */
#define I2C_CTLR2_LAST ((uint16_t)0x1000) /* DMA Last Transfer */
/******************* Bit definition for I2C_OADDR1 register *******************/
#define I2C_OADDR1_ADD1_7 ((uint16_t)0x00FE) /* Interface Address */
#define I2C_OADDR1_ADD8_9 ((uint16_t)0x0300) /* Interface Address */
#define I2C_OADDR1_ADD0 ((uint16_t)0x0001) /* Bit 0 */
#define I2C_OADDR1_ADD1 ((uint16_t)0x0002) /* Bit 1 */
#define I2C_OADDR1_ADD2 ((uint16_t)0x0004) /* Bit 2 */
#define I2C_OADDR1_ADD3 ((uint16_t)0x0008) /* Bit 3 */
#define I2C_OADDR1_ADD4 ((uint16_t)0x0010) /* Bit 4 */
#define I2C_OADDR1_ADD5 ((uint16_t)0x0020) /* Bit 5 */
#define I2C_OADDR1_ADD6 ((uint16_t)0x0040) /* Bit 6 */
#define I2C_OADDR1_ADD7 ((uint16_t)0x0080) /* Bit 7 */
#define I2C_OADDR1_ADD8 ((uint16_t)0x0100) /* Bit 8 */
#define I2C_OADDR1_ADD9 ((uint16_t)0x0200) /* Bit 9 */
#define I2C_OADDR1_ADDMODE ((uint16_t)0x8000) /* Addressing Mode (Slave mode) */
/******************* Bit definition for I2C_OADDR2 register *******************/
#define I2C_OADDR2_ENDUAL ((uint8_t)0x01) /* Dual addressing mode enable */
#define I2C_OADDR2_ADD2 ((uint8_t)0xFE) /* Interface address */
/******************** Bit definition for I2C_DATAR register ********************/
#define I2C_DR_DATAR ((uint8_t)0xFF) /* 8-bit Data Register */
/******************* Bit definition for I2C_STAR1 register ********************/
#define I2C_STAR1_SB ((uint16_t)0x0001) /* Start Bit (Master mode) */
#define I2C_STAR1_ADDR ((uint16_t)0x0002) /* Address sent (master mode)/matched (slave mode) */
#define I2C_STAR1_BTF ((uint16_t)0x0004) /* Byte Transfer Finished */
#define I2C_STAR1_ADD10 ((uint16_t)0x0008) /* 10-bit header sent (Master mode) */
#define I2C_STAR1_STOPF ((uint16_t)0x0010) /* Stop detection (Slave mode) */
#define I2C_STAR1_RXNE ((uint16_t)0x0040) /* Data Register not Empty (receivers) */
#define I2C_STAR1_TXE ((uint16_t)0x0080) /* Data Register Empty (transmitters) */
#define I2C_STAR1_BERR ((uint16_t)0x0100) /* Bus Error */
#define I2C_STAR1_ARLO ((uint16_t)0x0200) /* Arbitration Lost (master mode) */
#define I2C_STAR1_AF ((uint16_t)0x0400) /* Acknowledge Failure */
#define I2C_STAR1_OVR ((uint16_t)0x0800) /* Overrun/Underrun */
#define I2C_STAR1_PECERR ((uint16_t)0x1000) /* PEC Error in reception */
#define I2C_STAR1_TIMEOUT ((uint16_t)0x4000) /* Timeout or Tlow Error */
#define I2C_STAR1_SMBALERT ((uint16_t)0x8000) /* SMBus Alert */
/******************* Bit definition for I2C_STAR2 register ********************/
#define I2C_STAR2_MSL ((uint16_t)0x0001) /* Master/Slave */
#define I2C_STAR2_BUSY ((uint16_t)0x0002) /* Bus Busy */
#define I2C_STAR2_TRA ((uint16_t)0x0004) /* Transmitter/Receiver */
#define I2C_STAR2_GENCALL ((uint16_t)0x0010) /* General Call Address (Slave mode) */
#define I2C_STAR2_SMBDEFAULT ((uint16_t)0x0020) /* SMBus Device Default Address (Slave mode) */
#define I2C_STAR2_SMBHOST ((uint16_t)0x0040) /* SMBus Host Header (Slave mode) */
#define I2C_STAR2_DUALF ((uint16_t)0x0080) /* Dual Flag (Slave mode) */
#define I2C_STAR2_PEC ((uint16_t)0xFF00) /* Packet Error Checking Register */
/******************* Bit definition for I2C_CKCFGR register ********************/
#define I2C_CKCFGR_CCR ((uint16_t)0x0FFF) /* Clock Control Register in Fast/Standard mode (Master mode) */
#define I2C_CKCFGR_DUTY ((uint16_t)0x4000) /* Fast Mode Duty Cycle */
#define I2C_CKCFGR_FS ((uint16_t)0x8000) /* I2C Master Mode Selection */
/******************************************************************************/
/* Power Control */
/******************************************************************************/
/******************** Bit definition for PWR_CTLR register ********************/
#define PWR_CTLR_LPDS ((uint16_t)0x0001) /* Low-Power Deepsleep */
#define PWR_CTLR_PDDS ((uint16_t)0x0002) /* Power Down Deepsleep */
#define PWR_CTLR_CWUF ((uint16_t)0x0004) /* Clear Wakeup Flag */
#define PWR_CTLR_CSBF ((uint16_t)0x0008) /* Clear Standby Flag */
#define PWR_CTLR_PVDE ((uint16_t)0x0010) /* Power Voltage Detector Enable */
#define PWR_CTLR_PLS ((uint16_t)0x00E0) /* PLS[2:0] bits (PVD Level Selection) */
#define PWR_CTLR_PLS_0 ((uint16_t)0x0020) /* Bit 0 */
#define PWR_CTLR_PLS_1 ((uint16_t)0x0040) /* Bit 1 */
#define PWR_CTLR_PLS_2 ((uint16_t)0x0080) /* Bit 2 */
#define PWR_CTLR_PLS_2V2 ((uint16_t)0x0000) /* PVD level 2.2V */
#define PWR_CTLR_PLS_2V3 ((uint16_t)0x0020) /* PVD level 2.3V */
#define PWR_CTLR_PLS_2V4 ((uint16_t)0x0040) /* PVD level 2.4V */
#define PWR_CTLR_PLS_2V5 ((uint16_t)0x0060) /* PVD level 2.5V */
#define PWR_CTLR_PLS_2V6 ((uint16_t)0x0080) /* PVD level 2.6V */
#define PWR_CTLR_PLS_2V7 ((uint16_t)0x00A0) /* PVD level 2.7V */
#define PWR_CTLR_PLS_2V8 ((uint16_t)0x00C0) /* PVD level 2.8V */
#define PWR_CTLR_PLS_2V9 ((uint16_t)0x00E0) /* PVD level 2.9V */
#define PWR_CTLR_DBP ((uint16_t)0x0100) /* Disable Backup Domain write protection */
/******************* Bit definition for PWR_CSR register ********************/
#define PWR_CSR_WUF ((uint16_t)0x0001) /* Wakeup Flag */
#define PWR_CSR_SBF ((uint16_t)0x0002) /* Standby Flag */
#define PWR_CSR_PVDO ((uint16_t)0x0004) /* PVD Output */
#define PWR_CSR_EWUP ((uint16_t)0x0100) /* Enable WKUP pin */
/******************************************************************************/
/* Reset and Clock Control */
/******************************************************************************/
/******************** Bit definition for RCC_CTLR register ********************/
#define RCC_HSION ((uint32_t)0x00000001) /* Internal High Speed clock enable */
#define RCC_HSIRDY ((uint32_t)0x00000002) /* Internal High Speed clock ready flag */
#define RCC_HSITRIM ((uint32_t)0x000000F8) /* Internal High Speed clock trimming */
#define RCC_HSICAL ((uint32_t)0x0000FF00) /* Internal High Speed clock Calibration */
#define RCC_HSEON ((uint32_t)0x00010000) /* External High Speed clock enable */
#define RCC_HSERDY ((uint32_t)0x00020000) /* External High Speed clock ready flag */
#define RCC_HSEBYP ((uint32_t)0x00040000) /* External High Speed clock Bypass */
#define RCC_CSSON ((uint32_t)0x00080000) /* Clock Security System enable */
#define RCC_PLLON ((uint32_t)0x01000000) /* PLL enable */
#define RCC_PLLRDY ((uint32_t)0x02000000) /* PLL clock ready flag */
/******************* Bit definition for RCC_CFGR0 register *******************/
#define RCC_SW ((uint32_t)0x00000003) /* SW[1:0] bits (System clock Switch) */
#define RCC_SW_0 ((uint32_t)0x00000001) /* Bit 0 */
#define RCC_SW_1 ((uint32_t)0x00000002) /* Bit 1 */
#define RCC_SW_HSI ((uint32_t)0x00000000) /* HSI selected as system clock */
#define RCC_SW_HSE ((uint32_t)0x00000001) /* HSE selected as system clock */
#define RCC_SW_PLL ((uint32_t)0x00000002) /* PLL selected as system clock */
#define RCC_SWS ((uint32_t)0x0000000C) /* SWS[1:0] bits (System Clock Switch Status) */
#define RCC_SWS_0 ((uint32_t)0x00000004) /* Bit 0 */
#define RCC_SWS_1 ((uint32_t)0x00000008) /* Bit 1 */
#define RCC_SWS_HSI ((uint32_t)0x00000000) /* HSI oscillator used as system clock */
#define RCC_SWS_HSE ((uint32_t)0x00000004) /* HSE oscillator used as system clock */
#define RCC_SWS_PLL ((uint32_t)0x00000008) /* PLL used as system clock */
#define RCC_HPRE ((uint32_t)0x000000F0) /* HPRE[3:0] bits (AHB prescaler) */
#define RCC_HPRE_0 ((uint32_t)0x00000010) /* Bit 0 */
#define RCC_HPRE_1 ((uint32_t)0x00000020) /* Bit 1 */
#define RCC_HPRE_2 ((uint32_t)0x00000040) /* Bit 2 */
#define RCC_HPRE_3 ((uint32_t)0x00000080) /* Bit 3 */
#define RCC_HPRE_DIV1 ((uint32_t)0x00000000) /* SYSCLK not divided */
#define RCC_HPRE_DIV2 ((uint32_t)0x00000010) /* SYSCLK divided by 2 */
#define RCC_HPRE_DIV3 ((uint32_t)0x00000020) /* SYSCLK divided by 3 */
#define RCC_HPRE_DIV4 ((uint32_t)0x00000030) /* SYSCLK divided by 4 */
#define RCC_HPRE_DIV5 ((uint32_t)0x00000040) /* SYSCLK divided by 5 */
#define RCC_HPRE_DIV6 ((uint32_t)0x00000050) /* SYSCLK divided by 6 */
#define RCC_HPRE_DIV7 ((uint32_t)0x00000060) /* SYSCLK divided by 7 */
#define RCC_HPRE_DIV8 ((uint32_t)0x00000070) /* SYSCLK divided by 8 */
#define RCC_HPRE_DIV16 ((uint32_t)0x000000B0) /* SYSCLK divided by 16 */
#define RCC_HPRE_DIV32 ((uint32_t)0x000000C0) /* SYSCLK divided by 32 */
#define RCC_HPRE_DIV64 ((uint32_t)0x000000D0) /* SYSCLK divided by 64 */
#define RCC_HPRE_DIV128 ((uint32_t)0x000000E0) /* SYSCLK divided by 128 */
#define RCC_HPRE_DIV256 ((uint32_t)0x000000F0) /* SYSCLK divided by 256 */
#define RCC_PPRE1 ((uint32_t)0x00000700) /* PRE1[2:0] bits (APB1 prescaler) */
#define RCC_PPRE1_0 ((uint32_t)0x00000100) /* Bit 0 */
#define RCC_PPRE1_1 ((uint32_t)0x00000200) /* Bit 1 */
#define RCC_PPRE1_2 ((uint32_t)0x00000400) /* Bit 2 */
#define RCC_PPRE1_DIV1 ((uint32_t)0x00000000) /* HCLK not divided */
#define RCC_PPRE1_DIV2 ((uint32_t)0x00000400) /* HCLK divided by 2 */
#define RCC_PPRE1_DIV4 ((uint32_t)0x00000500) /* HCLK divided by 4 */
#define RCC_PPRE1_DIV8 ((uint32_t)0x00000600) /* HCLK divided by 8 */
#define RCC_PPRE1_DIV16 ((uint32_t)0x00000700) /* HCLK divided by 16 */
#define RCC_PPRE2 ((uint32_t)0x00003800) /* PRE2[2:0] bits (APB2 prescaler) */
#define RCC_PPRE2_0 ((uint32_t)0x00000800) /* Bit 0 */
#define RCC_PPRE2_1 ((uint32_t)0x00001000) /* Bit 1 */
#define RCC_PPRE2_2 ((uint32_t)0x00002000) /* Bit 2 */
#define RCC_PPRE2_DIV1 ((uint32_t)0x00000000) /* HCLK not divided */
#define RCC_PPRE2_DIV2 ((uint32_t)0x00002000) /* HCLK divided by 2 */
#define RCC_PPRE2_DIV4 ((uint32_t)0x00002800) /* HCLK divided by 4 */
#define RCC_PPRE2_DIV8 ((uint32_t)0x00003000) /* HCLK divided by 8 */
#define RCC_PPRE2_DIV16 ((uint32_t)0x00003800) /* HCLK divided by 16 */
#define RCC_ADCPRE ((uint32_t)0x0000C000) /* ADCPRE[1:0] bits (ADC prescaler) */
#define RCC_ADCPRE_0 ((uint32_t)0x00004000) /* Bit 0 */
#define RCC_ADCPRE_1 ((uint32_t)0x00008000) /* Bit 1 */
#define RCC_ADCPRE_DIV2 ((uint32_t)0x00000000) /* PCLK2 divided by 2 */
#define RCC_ADCPRE_DIV4 ((uint32_t)0x00004000) /* PCLK2 divided by 4 */
#define RCC_ADCPRE_DIV6 ((uint32_t)0x00008000) /* PCLK2 divided by 6 */
#define RCC_ADCPRE_DIV8 ((uint32_t)0x0000C000) /* PCLK2 divided by 8 */
#define RCC_PLLSRC ((uint32_t)0x00010000) /* PLL entry clock source */
#define RCC_PLLXTPRE ((uint32_t)0x00020000) /* HSE divider for PLL entry */
#define RCC_PLLMULL ((uint32_t)0x003C0000) /* PLLMUL[3:0] bits (PLL multiplication factor) */
#define RCC_PLLMULL_0 ((uint32_t)0x00040000) /* Bit 0 */
#define RCC_PLLMULL_1 ((uint32_t)0x00080000) /* Bit 1 */
#define RCC_PLLMULL_2 ((uint32_t)0x00100000) /* Bit 2 */
#define RCC_PLLMULL_3 ((uint32_t)0x00200000) /* Bit 3 */
#define RCC_PLLSRC_HSI_Mul2 ((uint32_t)0x00000000) /* HSI clock*2 selected as PLL entry clock source */
#define RCC_PLLSRC_HSE_Mul2 ((uint32_t)0x00010000) /* HSE clock*2 selected as PLL entry clock source */
#define RCC_PLLXTPRE_HSE ((uint32_t)0x00000000) /* HSE clock not divided for PLL entry */
#define RCC_PLLXTPRE_HSE_Div2 ((uint32_t)0x00020000) /* HSE clock divided by 2 for PLL entry */
#define RCC_PLLMULL2 ((uint32_t)0x00000000) /* PLL input clock*2 */
#define RCC_PLLMULL3 ((uint32_t)0x00040000) /* PLL input clock*3 */
#define RCC_PLLMULL4 ((uint32_t)0x00080000) /* PLL input clock*4 */
#define RCC_PLLMULL5 ((uint32_t)0x000C0000) /* PLL input clock*5 */
#define RCC_PLLMULL6 ((uint32_t)0x00100000) /* PLL input clock*6 */
#define RCC_PLLMULL7 ((uint32_t)0x00140000) /* PLL input clock*7 */
#define RCC_PLLMULL8 ((uint32_t)0x00180000) /* PLL input clock*8 */
#define RCC_PLLMULL9 ((uint32_t)0x001C0000) /* PLL input clock*9 */
#define RCC_PLLMULL10 ((uint32_t)0x00200000) /* PLL input clock10 */
#define RCC_PLLMULL11 ((uint32_t)0x00240000) /* PLL input clock*11 */
#define RCC_PLLMULL12 ((uint32_t)0x00280000) /* PLL input clock*12 */
#define RCC_PLLMULL13 ((uint32_t)0x002C0000) /* PLL input clock*13 */
#define RCC_PLLMULL14 ((uint32_t)0x00300000) /* PLL input clock*14 */
#define RCC_PLLMULL15 ((uint32_t)0x00340000) /* PLL input clock*15 */
#define RCC_PLLMULL16 ((uint32_t)0x00380000) /* PLL input clock*16 */
#define RCC_USBPRE ((uint32_t)0x00400000) /* USB Device prescaler */
#define RCC_CFGR0_MCO ((uint32_t)0x07000000) /* MCO[2:0] bits (Microcontroller Clock Output) */
#define RCC_MCO_0 ((uint32_t)0x01000000) /* Bit 0 */
#define RCC_MCO_1 ((uint32_t)0x02000000) /* Bit 1 */
#define RCC_MCO_2 ((uint32_t)0x04000000) /* Bit 2 */
#define RCC_MCO_NOCLOCK ((uint32_t)0x00000000) /* No clock */
#define RCC_CFGR0_MCO_SYSCLK ((uint32_t)0x04000000) /* System clock selected as MCO source */
#define RCC_CFGR0_MCO_HSI ((uint32_t)0x05000000) /* HSI clock selected as MCO source */
#define RCC_CFGR0_MCO_HSE ((uint32_t)0x06000000) /* HSE clock selected as MCO source */
#define RCC_CFGR0_MCO_PLL ((uint32_t)0x07000000) /* PLL clock divided by 2 selected as MCO source */
/******************* Bit definition for RCC_INTR register ********************/
#define RCC_LSIRDYF ((uint32_t)0x00000001) /* LSI Ready Interrupt flag */
#define RCC_LSERDYF ((uint32_t)0x00000002) /* LSE Ready Interrupt flag */
#define RCC_HSIRDYF ((uint32_t)0x00000004) /* HSI Ready Interrupt flag */
#define RCC_HSERDYF ((uint32_t)0x00000008) /* HSE Ready Interrupt flag */
#define RCC_PLLRDYF ((uint32_t)0x00000010) /* PLL Ready Interrupt flag */
#define RCC_CSSF ((uint32_t)0x00000080) /* Clock Security System Interrupt flag */
#define RCC_LSIRDYIE ((uint32_t)0x00000100) /* LSI Ready Interrupt Enable */
#define RCC_LSERDYIE ((uint32_t)0x00000200) /* LSE Ready Interrupt Enable */
#define RCC_HSIRDYIE ((uint32_t)0x00000400) /* HSI Ready Interrupt Enable */
#define RCC_HSERDYIE ((uint32_t)0x00000800) /* HSE Ready Interrupt Enable */
#define RCC_PLLRDYIE ((uint32_t)0x00001000) /* PLL Ready Interrupt Enable */
#define RCC_LSIRDYC ((uint32_t)0x00010000) /* LSI Ready Interrupt Clear */
#define RCC_LSERDYC ((uint32_t)0x00020000) /* LSE Ready Interrupt Clear */
#define RCC_HSIRDYC ((uint32_t)0x00040000) /* HSI Ready Interrupt Clear */
#define RCC_HSERDYC ((uint32_t)0x00080000) /* HSE Ready Interrupt Clear */
#define RCC_PLLRDYC ((uint32_t)0x00100000) /* PLL Ready Interrupt Clear */
#define RCC_CSSC ((uint32_t)0x00800000) /* Clock Security System Interrupt Clear */
/***************** Bit definition for RCC_APB2PRSTR register *****************/
#define RCC_AFIORST ((uint32_t)0x00000001) /* Alternate Function I/O reset */
#define RCC_IOPARST ((uint32_t)0x00000004) /* I/O port A reset */
#define RCC_IOPBRST ((uint32_t)0x00000008) /* I/O port B reset */
#define RCC_IOPCRST ((uint32_t)0x00000010) /* I/O port C reset */
#define RCC_IOPDRST ((uint32_t)0x00000020) /* I/O port D reset */
#define RCC_ADC1RST ((uint32_t)0x00000200) /* ADC 1 interface reset */
#define RCC_ADC2RST ((uint32_t)0x00000400) /* ADC 2 interface reset */
#define RCC_TIM1RST ((uint32_t)0x00000800) /* TIM1 Timer reset */
#define RCC_SPI1RST ((uint32_t)0x00001000) /* SPI 1 reset */
#define RCC_USART1RST ((uint32_t)0x00004000) /* USART1 reset */
#define RCC_IOPERST ((uint32_t)0x00000040) /* I/O port E reset */
/***************** Bit definition for RCC_APB1PRSTR register *****************/
#define RCC_TIM2RST ((uint32_t)0x00000001) /* Timer 2 reset */
#define RCC_TIM3RST ((uint32_t)0x00000002) /* Timer 3 reset */
#define RCC_WWDGRST ((uint32_t)0x00000800) /* Window Watchdog reset */
#define RCC_USART2RST ((uint32_t)0x00020000) /* USART 2 reset */
#define RCC_I2C1RST ((uint32_t)0x00200000) /* I2C 1 reset */
#define RCC_CAN1RST ((uint32_t)0x02000000) /* CAN1 reset */
#define RCC_BKPRST ((uint32_t)0x08000000) /* Backup interface reset */
#define RCC_PWRRST ((uint32_t)0x10000000) /* Power interface reset */
#define RCC_TIM4RST ((uint32_t)0x00000004) /* Timer 4 reset */
#define RCC_SPI2RST ((uint32_t)0x00004000) /* SPI 2 reset */
#define RCC_USART3RST ((uint32_t)0x00040000) /* USART 3 reset */
#define RCC_I2C2RST ((uint32_t)0x00400000) /* I2C 2 reset */
#define RCC_USBRST ((uint32_t)0x00800000) /* USB Device reset */
/****************** Bit definition for RCC_AHBPCENR register ******************/
#define RCC_DMA1EN ((uint16_t)0x0001) /* DMA1 clock enable */
#define RCC_SRAMEN ((uint16_t)0x0004) /* SRAM interface clock enable */
#define RCC_FLITFEN ((uint16_t)0x0010) /* FLITF clock enable */
#define RCC_CRCEN ((uint16_t)0x0040) /* CRC clock enable */
#define RCC_USBHD ((uint16_t)0x1000)
/****************** Bit definition for RCC_APB2PCENR register *****************/
#define RCC_AFIOEN ((uint32_t)0x00000001) /* Alternate Function I/O clock enable */
#define RCC_IOPAEN ((uint32_t)0x00000004) /* I/O port A clock enable */
#define RCC_IOPBEN ((uint32_t)0x00000008) /* I/O port B clock enable */
#define RCC_IOPCEN ((uint32_t)0x00000010) /* I/O port C clock enable */
#define RCC_IOPDEN ((uint32_t)0x00000020) /* I/O port D clock enable */
#define RCC_ADC1EN ((uint32_t)0x00000200) /* ADC 1 interface clock enable */
#define RCC_ADC2EN ((uint32_t)0x00000400) /* ADC 2 interface clock enable */
#define RCC_TIM1EN ((uint32_t)0x00000800) /* TIM1 Timer clock enable */
#define RCC_SPI1EN ((uint32_t)0x00001000) /* SPI 1 clock enable */
#define RCC_USART1EN ((uint32_t)0x00004000) /* USART1 clock enable */
/***************** Bit definition for RCC_APB1PCENR register ******************/
#define RCC_TIM2EN ((uint32_t)0x00000001) /* Timer 2 clock enabled*/
#define RCC_TIM3EN ((uint32_t)0x00000002) /* Timer 3 clock enable */
#define RCC_WWDGEN ((uint32_t)0x00000800) /* Window Watchdog clock enable */
#define RCC_USART2EN ((uint32_t)0x00020000) /* USART 2 clock enable */
#define RCC_I2C1EN ((uint32_t)0x00200000) /* I2C 1 clock enable */
#define RCC_BKPEN ((uint32_t)0x08000000) /* Backup interface clock enable */
#define RCC_PWREN ((uint32_t)0x10000000) /* Power interface clock enable */
#define RCC_USBEN ((uint32_t)0x00800000) /* USB Device clock enable */
/******************* Bit definition for RCC_RSTSCKR register ********************/
#define RCC_LSION ((uint32_t)0x00000001) /* Internal Low Speed oscillator enable */
#define RCC_LSIRDY ((uint32_t)0x00000002) /* Internal Low Speed oscillator Ready */
#define RCC_RMVF ((uint32_t)0x01000000) /* Remove reset flag */
#define RCC_PINRSTF ((uint32_t)0x04000000) /* PIN reset flag */
#define RCC_PORRSTF ((uint32_t)0x08000000) /* POR/PDR reset flag */
#define RCC_SFTRSTF ((uint32_t)0x10000000) /* Software Reset flag */
#define RCC_IWDGRSTF ((uint32_t)0x20000000) /* Independent Watchdog reset flag */
#define RCC_WWDGRSTF ((uint32_t)0x40000000) /* Window watchdog reset flag */
#define RCC_LPWRRSTF ((uint32_t)0x80000000) /* Low-Power reset flag */
/******************************************************************************/
/* Serial Peripheral Interface */
/******************************************************************************/
/******************* Bit definition for SPI_CTLR1 register ********************/
#define SPI_CTLR1_CPHA ((uint16_t)0x0001) /* Clock Phase */
#define SPI_CTLR1_CPOL ((uint16_t)0x0002) /* Clock Polarity */
#define SPI_CTLR1_MSTR ((uint16_t)0x0004) /* Master Selection */
#define SPI_CTLR1_BR ((uint16_t)0x0038) /* BR[2:0] bits (Baud Rate Control) */
#define SPI_CTLR1_BR_0 ((uint16_t)0x0008) /* Bit 0 */
#define SPI_CTLR1_BR_1 ((uint16_t)0x0010) /* Bit 1 */
#define SPI_CTLR1_BR_2 ((uint16_t)0x0020) /* Bit 2 */
#define SPI_CTLR1_SPE ((uint16_t)0x0040) /* SPI Enable */
#define SPI_CTLR1_SSI ((uint16_t)0x0100) /* Internal slave select */
#define SPI_CTLR1_SSM ((uint16_t)0x0200) /* Software slave management */
#define SPI_CTLR1_RXONLY ((uint16_t)0x0400) /* Receive only */
#define SPI_CTLR1_DFF ((uint16_t)0x0800) /* Data Frame Format */
#define SPI_CTLR1_CRCNEXT ((uint16_t)0x1000) /* Transmit CRC next */
#define SPI_CTLR1_CRCEN ((uint16_t)0x2000) /* Hardware CRC calculation enable */
#define SPI_CTLR1_BIDIOE ((uint16_t)0x4000) /* Output enable in bidirectional mode */
#define SPI_CTLR1_BIDIMODE ((uint16_t)0x8000) /* Bidirectional data mode enable */
/******************* Bit definition for SPI_CTLR2 register ********************/
#define SPI_CTLR2_RXDMAEN ((uint8_t)0x01) /* Rx Buffer DMA Enable */
#define SPI_CTLR2_TXDMAEN ((uint8_t)0x02) /* Tx Buffer DMA Enable */
#define SPI_CTLR2_SSOE ((uint8_t)0x04) /* SS Output Enable */
#define SPI_CTLR2_ERRIE ((uint8_t)0x20) /* Error Interrupt Enable */
#define SPI_CTLR2_RXNEIE ((uint8_t)0x40) /* RX buffer Not Empty Interrupt Enable */
#define SPI_CTLR2_TXEIE ((uint8_t)0x80) /* Tx buffer Empty Interrupt Enable */
/******************** Bit definition for SPI_STATR register ********************/
#define SPI_STATR_RXNE ((uint8_t)0x01) /* Receive buffer Not Empty */
#define SPI_STATR_TXE ((uint8_t)0x02) /* Transmit buffer Empty */
#define SPI_STATR_CHSIDE ((uint8_t)0x04) /* Channel side */
#define SPI_STATR_UDR ((uint8_t)0x08) /* Underrun flag */
#define SPI_STATR_CRCERR ((uint8_t)0x10) /* CRC Error flag */
#define SPI_STATR_MODF ((uint8_t)0x20) /* Mode fault */
#define SPI_STATR_OVR ((uint8_t)0x40) /* Overrun flag */
#define SPI_STATR_BSY ((uint8_t)0x80) /* Busy flag */
/******************** Bit definition for SPI_DATAR register ********************/
#define SPI_DATAR_DR ((uint16_t)0xFFFF) /* Data Register */
/******************* Bit definition for SPI_CRCR register ******************/
#define SPI_CRCR_CRCPOLY ((uint16_t)0xFFFF) /* CRC polynomial register */
/****************** Bit definition for SPI_RCRCR register ******************/
#define SPI_RCRCR_RXCRC ((uint16_t)0xFFFF) /* Rx CRC Register */
/****************** Bit definition for SPI_TCRCR register ******************/
#define SPI_TCRCR_TXCRC ((uint16_t)0xFFFF) /* Tx CRC Register */
/******************************************************************************/
/* TIM */
/******************************************************************************/
/******************* Bit definition for TIM_CTLR1 register ********************/
#define TIM_CEN ((uint16_t)0x0001) /* Counter enable */
#define TIM_UDIS ((uint16_t)0x0002) /* Update disable */
#define TIM_URS ((uint16_t)0x0004) /* Update request source */
#define TIM_OPM ((uint16_t)0x0008) /* One pulse mode */
#define TIM_DIR ((uint16_t)0x0010) /* Direction */
#define TIM_CMS ((uint16_t)0x0060) /* CMS[1:0] bits (Center-aligned mode selection) */
#define TIM_CMS_0 ((uint16_t)0x0020) /* Bit 0 */
#define TIM_CMS_1 ((uint16_t)0x0040) /* Bit 1 */
#define TIM_ARPE ((uint16_t)0x0080) /* Auto-reload preload enable */
#define TIM_CTLR1_CKD ((uint16_t)0x0300) /* CKD[1:0] bits (clock division) */
#define TIM_CKD_0 ((uint16_t)0x0100) /* Bit 0 */
#define TIM_CKD_1 ((uint16_t)0x0200) /* Bit 1 */
/******************* Bit definition for TIM_CTLR2 register ********************/
#define TIM_CCPC ((uint16_t)0x0001) /* Capture/Compare Preloaded Control */
#define TIM_CCUS ((uint16_t)0x0004) /* Capture/Compare Control Update Selection */
#define TIM_CCDS ((uint16_t)0x0008) /* Capture/Compare DMA Selection */
#define TIM_MMS ((uint16_t)0x0070) /* MMS[2:0] bits (Master Mode Selection) */
#define TIM_MMS_0 ((uint16_t)0x0010) /* Bit 0 */
#define TIM_MMS_1 ((uint16_t)0x0020) /* Bit 1 */
#define TIM_MMS_2 ((uint16_t)0x0040) /* Bit 2 */
#define TIM_TI1S ((uint16_t)0x0080) /* TI1 Selection */
#define TIM_OIS1 ((uint16_t)0x0100) /* Output Idle state 1 (OC1 output) */
#define TIM_OIS1N ((uint16_t)0x0200) /* Output Idle state 1 (OC1N output) */
#define TIM_OIS2 ((uint16_t)0x0400) /* Output Idle state 2 (OC2 output) */
#define TIM_OIS2N ((uint16_t)0x0800) /* Output Idle state 2 (OC2N output) */
#define TIM_OIS3 ((uint16_t)0x1000) /* Output Idle state 3 (OC3 output) */
#define TIM_OIS3N ((uint16_t)0x2000) /* Output Idle state 3 (OC3N output) */
#define TIM_OIS4 ((uint16_t)0x4000) /* Output Idle state 4 (OC4 output) */
/******************* Bit definition for TIM_SMCFGR register *******************/
#define TIM_SMS ((uint16_t)0x0007) /* SMS[2:0] bits (Slave mode selection) */
#define TIM_SMS_0 ((uint16_t)0x0001) /* Bit 0 */
#define TIM_SMS_1 ((uint16_t)0x0002) /* Bit 1 */
#define TIM_SMS_2 ((uint16_t)0x0004) /* Bit 2 */
#define TIM_TS ((uint16_t)0x0070) /* TS[2:0] bits (Trigger selection) */
#define TIM_TS_0 ((uint16_t)0x0010) /* Bit 0 */
#define TIM_TS_1 ((uint16_t)0x0020) /* Bit 1 */
#define TIM_TS_2 ((uint16_t)0x0040) /* Bit 2 */
#define TIM_MSM ((uint16_t)0x0080) /* Master/slave mode */
#define TIM_ETF ((uint16_t)0x0F00) /* ETF[3:0] bits (External trigger filter) */
#define TIM_ETF_0 ((uint16_t)0x0100) /* Bit 0 */
#define TIM_ETF_1 ((uint16_t)0x0200) /* Bit 1 */
#define TIM_ETF_2 ((uint16_t)0x0400) /* Bit 2 */
#define TIM_ETF_3 ((uint16_t)0x0800) /* Bit 3 */
#define TIM_ETPS ((uint16_t)0x3000) /* ETPS[1:0] bits (External trigger prescaler) */
#define TIM_ETPS_0 ((uint16_t)0x1000) /* Bit 0 */
#define TIM_ETPS_1 ((uint16_t)0x2000) /* Bit 1 */
#define TIM_ECE ((uint16_t)0x4000) /* External clock enable */
#define TIM_ETP ((uint16_t)0x8000) /* External trigger polarity */
/******************* Bit definition for TIM_DMAINTENR register *******************/
#define TIM_UIE ((uint16_t)0x0001) /* Update interrupt enable */
#define TIM_CC1IE ((uint16_t)0x0002) /* Capture/Compare 1 interrupt enable */
#define TIM_CC2IE ((uint16_t)0x0004) /* Capture/Compare 2 interrupt enable */
#define TIM_CC3IE ((uint16_t)0x0008) /* Capture/Compare 3 interrupt enable */
#define TIM_CC4IE ((uint16_t)0x0010) /* Capture/Compare 4 interrupt enable */
#define TIM_COMIE ((uint16_t)0x0020) /* COM interrupt enable */
#define TIM_TIE ((uint16_t)0x0040) /* Trigger interrupt enable */
#define TIM_BIE ((uint16_t)0x0080) /* Break interrupt enable */
#define TIM_UDE ((uint16_t)0x0100) /* Update DMA request enable */
#define TIM_CC1DE ((uint16_t)0x0200) /* Capture/Compare 1 DMA request enable */
#define TIM_CC2DE ((uint16_t)0x0400) /* Capture/Compare 2 DMA request enable */
#define TIM_CC3DE ((uint16_t)0x0800) /* Capture/Compare 3 DMA request enable */
#define TIM_CC4DE ((uint16_t)0x1000) /* Capture/Compare 4 DMA request enable */
#define TIM_COMDE ((uint16_t)0x2000) /* COM DMA request enable */
#define TIM_TDE ((uint16_t)0x4000) /* Trigger DMA request enable */
/******************** Bit definition for TIM_INTFR register ********************/
#define TIM_UIF ((uint16_t)0x0001) /* Update interrupt Flag */
#define TIM_CC1IF ((uint16_t)0x0002) /* Capture/Compare 1 interrupt Flag */
#define TIM_CC2IF ((uint16_t)0x0004) /* Capture/Compare 2 interrupt Flag */
#define TIM_CC3IF ((uint16_t)0x0008) /* Capture/Compare 3 interrupt Flag */
#define TIM_CC4IF ((uint16_t)0x0010) /* Capture/Compare 4 interrupt Flag */
#define TIM_COMIF ((uint16_t)0x0020) /* COM interrupt Flag */
#define TIM_TIF ((uint16_t)0x0040) /* Trigger interrupt Flag */
#define TIM_BIF ((uint16_t)0x0080) /* Break interrupt Flag */
#define TIM_CC1OF ((uint16_t)0x0200) /* Capture/Compare 1 Overcapture Flag */
#define TIM_CC2OF ((uint16_t)0x0400) /* Capture/Compare 2 Overcapture Flag */
#define TIM_CC3OF ((uint16_t)0x0800) /* Capture/Compare 3 Overcapture Flag */
#define TIM_CC4OF ((uint16_t)0x1000) /* Capture/Compare 4 Overcapture Flag */
/******************* Bit definition for TIM_SWEVGR register ********************/
#define TIM_UG ((uint8_t)0x01) /* Update Generation */
#define TIM_CC1G ((uint8_t)0x02) /* Capture/Compare 1 Generation */
#define TIM_CC2G ((uint8_t)0x04) /* Capture/Compare 2 Generation */
#define TIM_CC3G ((uint8_t)0x08) /* Capture/Compare 3 Generation */
#define TIM_CC4G ((uint8_t)0x10) /* Capture/Compare 4 Generation */
#define TIM_COMG ((uint8_t)0x20) /* Capture/Compare Control Update Generation */
#define TIM_TG ((uint8_t)0x40) /* Trigger Generation */
#define TIM_BG ((uint8_t)0x80) /* Break Generation */
/****************** Bit definition for TIM_CHCTLR1 register *******************/
#define TIM_CC1S ((uint16_t)0x0003) /* CC1S[1:0] bits (Capture/Compare 1 Selection) */
#define TIM_CC1S_0 ((uint16_t)0x0001) /* Bit 0 */
#define TIM_CC1S_1 ((uint16_t)0x0002) /* Bit 1 */
#define TIM_OC1FE ((uint16_t)0x0004) /* Output Compare 1 Fast enable */
#define TIM_OC1PE ((uint16_t)0x0008) /* Output Compare 1 Preload enable */
#define TIM_OC1M ((uint16_t)0x0070) /* OC1M[2:0] bits (Output Compare 1 Mode) */
#define TIM_OC1M_0 ((uint16_t)0x0010) /* Bit 0 */
#define TIM_OC1M_1 ((uint16_t)0x0020) /* Bit 1 */
#define TIM_OC1M_2 ((uint16_t)0x0040) /* Bit 2 */
#define TIM_OC1CE ((uint16_t)0x0080) /* Output Compare 1Clear Enable */
#define TIM_CC2S ((uint16_t)0x0300) /* CC2S[1:0] bits (Capture/Compare 2 Selection) */
#define TIM_CC2S_0 ((uint16_t)0x0100) /* Bit 0 */
#define TIM_CC2S_1 ((uint16_t)0x0200) /* Bit 1 */
#define TIM_OC2FE ((uint16_t)0x0400) /* Output Compare 2 Fast enable */
#define TIM_OC2PE ((uint16_t)0x0800) /* Output Compare 2 Preload enable */
#define TIM_OC2M ((uint16_t)0x7000) /* OC2M[2:0] bits (Output Compare 2 Mode) */
#define TIM_OC2M_0 ((uint16_t)0x1000) /* Bit 0 */
#define TIM_OC2M_1 ((uint16_t)0x2000) /* Bit 1 */
#define TIM_OC2M_2 ((uint16_t)0x4000) /* Bit 2 */
#define TIM_OC2CE ((uint16_t)0x8000) /* Output Compare 2 Clear Enable */
#define TIM_IC1PSC ((uint16_t)0x000C) /* IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
#define TIM_IC1PSC_0 ((uint16_t)0x0004) /* Bit 0 */
#define TIM_IC1PSC_1 ((uint16_t)0x0008) /* Bit 1 */
#define TIM_IC1F ((uint16_t)0x00F0) /* IC1F[3:0] bits (Input Capture 1 Filter) */
#define TIM_IC1F_0 ((uint16_t)0x0010) /* Bit 0 */
#define TIM_IC1F_1 ((uint16_t)0x0020) /* Bit 1 */
#define TIM_IC1F_2 ((uint16_t)0x0040) /* Bit 2 */
#define TIM_IC1F_3 ((uint16_t)0x0080) /* Bit 3 */
#define TIM_IC2PSC ((uint16_t)0x0C00) /* IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
#define TIM_IC2PSC_0 ((uint16_t)0x0400) /* Bit 0 */
#define TIM_IC2PSC_1 ((uint16_t)0x0800) /* Bit 1 */
#define TIM_IC2F ((uint16_t)0xF000) /* IC2F[3:0] bits (Input Capture 2 Filter) */
#define TIM_IC2F_0 ((uint16_t)0x1000) /* Bit 0 */
#define TIM_IC2F_1 ((uint16_t)0x2000) /* Bit 1 */
#define TIM_IC2F_2 ((uint16_t)0x4000) /* Bit 2 */
#define TIM_IC2F_3 ((uint16_t)0x8000) /* Bit 3 */
/****************** Bit definition for TIM_CHCTLR2 register *******************/
#define TIM_CC3S ((uint16_t)0x0003) /* CC3S[1:0] bits (Capture/Compare 3 Selection) */
#define TIM_CC3S_0 ((uint16_t)0x0001) /* Bit 0 */
#define TIM_CC3S_1 ((uint16_t)0x0002) /* Bit 1 */
#define TIM_OC3FE ((uint16_t)0x0004) /* Output Compare 3 Fast enable */
#define TIM_OC3PE ((uint16_t)0x0008) /* Output Compare 3 Preload enable */
#define TIM_OC3M ((uint16_t)0x0070) /* OC3M[2:0] bits (Output Compare 3 Mode) */
#define TIM_OC3M_0 ((uint16_t)0x0010) /* Bit 0 */
#define TIM_OC3M_1 ((uint16_t)0x0020) /* Bit 1 */
#define TIM_OC3M_2 ((uint16_t)0x0040) /* Bit 2 */
#define TIM_OC3CE ((uint16_t)0x0080) /* Output Compare 3 Clear Enable */
#define TIM_CC4S ((uint16_t)0x0300) /* CC4S[1:0] bits (Capture/Compare 4 Selection) */
#define TIM_CC4S_0 ((uint16_t)0x0100) /* Bit 0 */
#define TIM_CC4S_1 ((uint16_t)0x0200) /* Bit 1 */
#define TIM_OC4FE ((uint16_t)0x0400) /* Output Compare 4 Fast enable */
#define TIM_OC4PE ((uint16_t)0x0800) /* Output Compare 4 Preload enable */
#define TIM_OC4M ((uint16_t)0x7000) /* OC4M[2:0] bits (Output Compare 4 Mode) */
#define TIM_OC4M_0 ((uint16_t)0x1000) /* Bit 0 */
#define TIM_OC4M_1 ((uint16_t)0x2000) /* Bit 1 */
#define TIM_OC4M_2 ((uint16_t)0x4000) /* Bit 2 */
#define TIM_OC4CE ((uint16_t)0x8000) /* Output Compare 4 Clear Enable */
#define TIM_IC3PSC ((uint16_t)0x000C) /* IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
#define TIM_IC3PSC_0 ((uint16_t)0x0004) /* Bit 0 */
#define TIM_IC3PSC_1 ((uint16_t)0x0008) /* Bit 1 */
#define TIM_IC3F ((uint16_t)0x00F0) /* IC3F[3:0] bits (Input Capture 3 Filter) */
#define TIM_IC3F_0 ((uint16_t)0x0010) /* Bit 0 */
#define TIM_IC3F_1 ((uint16_t)0x0020) /* Bit 1 */
#define TIM_IC3F_2 ((uint16_t)0x0040) /* Bit 2 */
#define TIM_IC3F_3 ((uint16_t)0x0080) /* Bit 3 */
#define TIM_IC4PSC ((uint16_t)0x0C00) /* IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
#define TIM_IC4PSC_0 ((uint16_t)0x0400) /* Bit 0 */
#define TIM_IC4PSC_1 ((uint16_t)0x0800) /* Bit 1 */
#define TIM_IC4F ((uint16_t)0xF000) /* IC4F[3:0] bits (Input Capture 4 Filter) */
#define TIM_IC4F_0 ((uint16_t)0x1000) /* Bit 0 */
#define TIM_IC4F_1 ((uint16_t)0x2000) /* Bit 1 */
#define TIM_IC4F_2 ((uint16_t)0x4000) /* Bit 2 */
#define TIM_IC4F_3 ((uint16_t)0x8000) /* Bit 3 */
/******************* Bit definition for TIM_CCER register *******************/
#define TIM_CC1E ((uint16_t)0x0001) /* Capture/Compare 1 output enable */
#define TIM_CC1P ((uint16_t)0x0002) /* Capture/Compare 1 output Polarity */
#define TIM_CC1NE ((uint16_t)0x0004) /* Capture/Compare 1 Complementary output enable */
#define TIM_CC1NP ((uint16_t)0x0008) /* Capture/Compare 1 Complementary output Polarity */
#define TIM_CC2E ((uint16_t)0x0010) /* Capture/Compare 2 output enable */
#define TIM_CC2P ((uint16_t)0x0020) /* Capture/Compare 2 output Polarity */
#define TIM_CC2NE ((uint16_t)0x0040) /* Capture/Compare 2 Complementary output enable */
#define TIM_CC2NP ((uint16_t)0x0080) /* Capture/Compare 2 Complementary output Polarity */
#define TIM_CC3E ((uint16_t)0x0100) /* Capture/Compare 3 output enable */
#define TIM_CC3P ((uint16_t)0x0200) /* Capture/Compare 3 output Polarity */
#define TIM_CC3NE ((uint16_t)0x0400) /* Capture/Compare 3 Complementary output enable */
#define TIM_CC3NP ((uint16_t)0x0800) /* Capture/Compare 3 Complementary output Polarity */
#define TIM_CC4E ((uint16_t)0x1000) /* Capture/Compare 4 output enable */
#define TIM_CC4P ((uint16_t)0x2000) /* Capture/Compare 4 output Polarity */
#define TIM_CC4NP ((uint16_t)0x8000) /* Capture/Compare 4 Complementary output Polarity */
/******************* Bit definition for TIM_CNT register ********************/
#define TIM_CNT ((uint16_t)0xFFFF) /* Counter Value */
/******************* Bit definition for TIM_PSC register ********************/
#define TIM_PSC ((uint16_t)0xFFFF) /* Prescaler Value */
/******************* Bit definition for TIM_ATRLR register ********************/
#define TIM_ARR ((uint16_t)0xFFFF) /* actual auto-reload Value */
/******************* Bit definition for TIM_RPTCR register ********************/
#define TIM_REP ((uint8_t)0xFF) /* Repetition Counter Value */
/******************* Bit definition for TIM_CH1CVR register *******************/
#define TIM_CCR1 ((uint16_t)0xFFFF) /* Capture/Compare 1 Value */
/******************* Bit definition for TIM_CH2CVR register *******************/
#define TIM_CCR2 ((uint16_t)0xFFFF) /* Capture/Compare 2 Value */
/******************* Bit definition for TIM_CH3CVR register *******************/
#define TIM_CCR3 ((uint16_t)0xFFFF) /* Capture/Compare 3 Value */
/******************* Bit definition for TIM_CH4CVR register *******************/
#define TIM_CCR4 ((uint16_t)0xFFFF) /* Capture/Compare 4 Value */
/******************* Bit definition for TIM_BDTR register *******************/
#define TIM_DTG ((uint16_t)0x00FF) /* DTG[0:7] bits (Dead-Time Generator set-up) */
#define TIM_DTG_0 ((uint16_t)0x0001) /* Bit 0 */
#define TIM_DTG_1 ((uint16_t)0x0002) /* Bit 1 */
#define TIM_DTG_2 ((uint16_t)0x0004) /* Bit 2 */
#define TIM_DTG_3 ((uint16_t)0x0008) /* Bit 3 */
#define TIM_DTG_4 ((uint16_t)0x0010) /* Bit 4 */
#define TIM_DTG_5 ((uint16_t)0x0020) /* Bit 5 */
#define TIM_DTG_6 ((uint16_t)0x0040) /* Bit 6 */
#define TIM_DTG_7 ((uint16_t)0x0080) /* Bit 7 */
#define TIM_LOCK ((uint16_t)0x0300) /* LOCK[1:0] bits (Lock Configuration) */
#define TIM_LOCK_0 ((uint16_t)0x0100) /* Bit 0 */
#define TIM_LOCK_1 ((uint16_t)0x0200) /* Bit 1 */
#define TIM_OSSI ((uint16_t)0x0400) /* Off-State Selection for Idle mode */
#define TIM_OSSR ((uint16_t)0x0800) /* Off-State Selection for Run mode */
#define TIM_BKE ((uint16_t)0x1000) /* Break enable */
#define TIM_BKP ((uint16_t)0x2000) /* Break Polarity */
#define TIM_AOE ((uint16_t)0x4000) /* Automatic Output enable */
#define TIM_MOE ((uint16_t)0x8000) /* Main Output enable */
/******************* Bit definition for TIM_DMACFGR register ********************/
#define TIM_DBA ((uint16_t)0x001F) /* DBA[4:0] bits (DMA Base Address) */
#define TIM_DBA_0 ((uint16_t)0x0001) /* Bit 0 */
#define TIM_DBA_1 ((uint16_t)0x0002) /* Bit 1 */
#define TIM_DBA_2 ((uint16_t)0x0004) /* Bit 2 */
#define TIM_DBA_3 ((uint16_t)0x0008) /* Bit 3 */
#define TIM_DBA_4 ((uint16_t)0x0010) /* Bit 4 */
#define TIM_DBL ((uint16_t)0x1F00) /* DBL[4:0] bits (DMA Burst Length) */
#define TIM_DBL_0 ((uint16_t)0x0100) /* Bit 0 */
#define TIM_DBL_1 ((uint16_t)0x0200) /* Bit 1 */
#define TIM_DBL_2 ((uint16_t)0x0400) /* Bit 2 */
#define TIM_DBL_3 ((uint16_t)0x0800) /* Bit 3 */
#define TIM_DBL_4 ((uint16_t)0x1000) /* Bit 4 */
/******************* Bit definition for TIM_DMAADR register *******************/
#define TIM_DMAR_DMAB ((uint16_t)0xFFFF) /* DMA register for burst accesses */
/******************************************************************************/
/* Universal Synchronous Asynchronous Receiver Transmitter */
/******************************************************************************/
/******************* Bit definition for USART_STATR register *******************/
#define USART_STATR_PE ((uint16_t)0x0001) /* Parity Error */
#define USART_STATR_FE ((uint16_t)0x0002) /* Framing Error */
#define USART_STATR_NE ((uint16_t)0x0004) /* Noise Error Flag */
#define USART_STATR_ORE ((uint16_t)0x0008) /* OverRun Error */
#define USART_STATR_IDLE ((uint16_t)0x0010) /* IDLE line detected */
#define USART_STATR_RXNE ((uint16_t)0x0020) /* Read Data Register Not Empty */
#define USART_STATR_TC ((uint16_t)0x0040) /* Transmission Complete */
#define USART_STATR_TXE ((uint16_t)0x0080) /* Transmit Data Register Empty */
#define USART_STATR_LBD ((uint16_t)0x0100) /* LIN Break Detection Flag */
#define USART_STATR_CTS ((uint16_t)0x0200) /* CTS Flag */
/******************* Bit definition for USART_DATAR register *******************/
#define USART_DATAR_DR ((uint16_t)0x01FF) /* Data value */
/****************** Bit definition for USART_BRR register *******************/
#define USART_BRR_DIV_Fraction ((uint16_t)0x000F) /* Fraction of USARTDIV */
#define USART_BRR_DIV_Mantissa ((uint16_t)0xFFF0) /* Mantissa of USARTDIV */
/****************** Bit definition for USART_CTLR1 register *******************/
#define USART_CTLR1_SBK ((uint16_t)0x0001) /* Send Break */
#define USART_CTLR1_RWU ((uint16_t)0x0002) /* Receiver wakeup */
#define USART_CTLR1_RE ((uint16_t)0x0004) /* Receiver Enable */
#define USART_CTLR1_TE ((uint16_t)0x0008) /* Transmitter Enable */
#define USART_CTLR1_IDLEIE ((uint16_t)0x0010) /* IDLE Interrupt Enable */
#define USART_CTLR1_RXNEIE ((uint16_t)0x0020) /* RXNE Interrupt Enable */
#define USART_CTLR1_TCIE ((uint16_t)0x0040) /* Transmission Complete Interrupt Enable */
#define USART_CTLR1_TXEIE ((uint16_t)0x0080) /* PE Interrupt Enable */
#define USART_CTLR1_PEIE ((uint16_t)0x0100) /* PE Interrupt Enable */
#define USART_CTLR1_PS ((uint16_t)0x0200) /* Parity Selection */
#define USART_CTLR1_PCE ((uint16_t)0x0400) /* Parity Control Enable */
#define USART_CTLR1_WAKE ((uint16_t)0x0800) /* Wakeup method */
#define USART_CTLR1_M ((uint16_t)0x1000) /* Word length */
#define USART_CTLR1_UE ((uint16_t)0x2000) /* USART Enable */
#define USART_CTLR1_OVER8 ((uint16_t)0x8000) /* USART Oversmapling 8-bits */
/****************** Bit definition for USART_CTLR2 register *******************/
#define USART_CTLR2_ADD ((uint16_t)0x000F) /* Address of the USART node */
#define USART_CTLR2_LBDL ((uint16_t)0x0020) /* LIN Break Detection Length */
#define USART_CTLR2_LBDIE ((uint16_t)0x0040) /* LIN Break Detection Interrupt Enable */
#define USART_CTLR2_LBCL ((uint16_t)0x0100) /* Last Bit Clock pulse */
#define USART_CTLR2_CPHA ((uint16_t)0x0200) /* Clock Phase */
#define USART_CTLR2_CPOL ((uint16_t)0x0400) /* Clock Polarity */
#define USART_CTLR2_CLKEN ((uint16_t)0x0800) /* Clock Enable */
#define USART_CTLR2_STOP ((uint16_t)0x3000) /* STOP[1:0] bits (STOP bits) */
#define USART_CTLR2_STOP_0 ((uint16_t)0x1000) /* Bit 0 */
#define USART_CTLR2_STOP_1 ((uint16_t)0x2000) /* Bit 1 */
#define USART_CTLR2_LINEN ((uint16_t)0x4000) /* LIN mode enable */
/****************** Bit definition for USART_CTLR3 register *******************/
#define USART_CTLR3_EIE ((uint16_t)0x0001) /* Error Interrupt Enable */
#define USART_CTLR3_IREN ((uint16_t)0x0002) /* IrDA mode Enable */
#define USART_CTLR3_IRLP ((uint16_t)0x0004) /* IrDA Low-Power */
#define USART_CTLR3_HDSEL ((uint16_t)0x0008) /* Half-Duplex Selection */
#define USART_CTLR3_NACK ((uint16_t)0x0010) /* Smartcard NACK enable */
#define USART_CTLR3_SCEN ((uint16_t)0x0020) /* Smartcard mode enable */
#define USART_CTLR3_DMAR ((uint16_t)0x0040) /* DMA Enable Receiver */
#define USART_CTLR3_DMAT ((uint16_t)0x0080) /* DMA Enable Transmitter */
#define USART_CTLR3_RTSE ((uint16_t)0x0100) /* RTS Enable */
#define USART_CTLR3_CTSE ((uint16_t)0x0200) /* CTS Enable */
#define USART_CTLR3_CTSIE ((uint16_t)0x0400) /* CTS Interrupt Enable */
#define USART_CTLR3_ONEBIT ((uint16_t)0x0800) /* One Bit method */
/****************** Bit definition for USART_GPR register ******************/
#define USART_GPR_PSC ((uint16_t)0x00FF) /* PSC[7:0] bits (Prescaler value) */
#define USART_GPR_PSC_0 ((uint16_t)0x0001) /* Bit 0 */
#define USART_GPR_PSC_1 ((uint16_t)0x0002) /* Bit 1 */
#define USART_GPR_PSC_2 ((uint16_t)0x0004) /* Bit 2 */
#define USART_GPR_PSC_3 ((uint16_t)0x0008) /* Bit 3 */
#define USART_GPR_PSC_4 ((uint16_t)0x0010) /* Bit 4 */
#define USART_GPR_PSC_5 ((uint16_t)0x0020) /* Bit 5 */
#define USART_GPR_PSC_6 ((uint16_t)0x0040) /* Bit 6 */
#define USART_GPR_PSC_7 ((uint16_t)0x0080) /* Bit 7 */
#define USART_GPR_GT ((uint16_t)0xFF00) /* Guard time value */
/******************************************************************************/
/* Window WATCHDOG */
/******************************************************************************/
/******************* Bit definition for WWDG_CTLR register ********************/
#define WWDG_CTLR_T ((uint8_t)0x7F) /* T[6:0] bits (7-Bit counter (MSB to LSB)) */
#define WWDG_CTLR_T0 ((uint8_t)0x01) /* Bit 0 */
#define WWDG_CTLR_T1 ((uint8_t)0x02) /* Bit 1 */
#define WWDG_CTLR_T2 ((uint8_t)0x04) /* Bit 2 */
#define WWDG_CTLR_T3 ((uint8_t)0x08) /* Bit 3 */
#define WWDG_CTLR_T4 ((uint8_t)0x10) /* Bit 4 */
#define WWDG_CTLR_T5 ((uint8_t)0x20) /* Bit 5 */
#define WWDG_CTLR_T6 ((uint8_t)0x40) /* Bit 6 */
#define WWDG_CTLR_WDGA ((uint8_t)0x80) /* Activation bit */
/******************* Bit definition for WWDG_CFGR register *******************/
#define WWDG_CFGR_W ((uint16_t)0x007F) /* W[6:0] bits (7-bit window value) */
#define WWDG_CFGR_W0 ((uint16_t)0x0001) /* Bit 0 */
#define WWDG_CFGR_W1 ((uint16_t)0x0002) /* Bit 1 */
#define WWDG_CFGR_W2 ((uint16_t)0x0004) /* Bit 2 */
#define WWDG_CFGR_W3 ((uint16_t)0x0008) /* Bit 3 */
#define WWDG_CFGR_W4 ((uint16_t)0x0010) /* Bit 4 */
#define WWDG_CFGR_W5 ((uint16_t)0x0020) /* Bit 5 */
#define WWDG_CFGR_W6 ((uint16_t)0x0040) /* Bit 6 */
#define WWDG_CFGR_WDGTB ((uint16_t)0x0180) /* WDGTB[1:0] bits (Timer Base) */
#define WWDG_CFGR_WDGTB0 ((uint16_t)0x0080) /* Bit 0 */
#define WWDG_CFGR_WDGTB1 ((uint16_t)0x0100) /* Bit 1 */
#define WWDG_CFGR_EWI ((uint16_t)0x0200) /* Early Wakeup Interrupt */
/******************* Bit definition for WWDG_STATR register ********************/
#define WWDG_STATR_EWIF ((uint8_t)0x01) /* Early Wakeup Interrupt Flag */
/******************************************************************************/
/* ENHANCED FUNNCTION */
/******************************************************************************/
/**************************** Enhanced register *****************************/
#define EXTEN_LOCKUP_EN ((uint32_t)0x00000040) /* Bit 6 */
#define EXTEN_LOCKUP_RSTF ((uint32_t)0x00000080) /* Bit 7 */
#define EXTEN_LDO_TRIM ((uint32_t)0x00000400) /* Bit 10 */
#define EXTEN_OPA_EN ((uint32_t)0x00010000)
#define EXTEN_OPA_NSEL ((uint32_t)0x00020000)
#define EXTEN_OPA_PSEL ((uint32_t)0x00040000)
#include <ch32v00x_conf.h>
#ifdef __cplusplus
}
#endif
#endif /* __CH32V00x_H */