221 lines
10 KiB
C
221 lines
10 KiB
C
|
/********************************** (C) COPYRIGHT *******************************
|
||
|
|
* File Name : ch32v20x_spi.h
|
||
|
|
* Author : WCH
|
||
|
|
* Version : V1.0.0
|
||
|
|
* Date : 2021/06/06
|
||
|
|
* Description : This file contains all the functions prototypes for the
|
||
|
|
* SPI firmware library.
|
||
|
|
*********************************************************************************
|
||
|
|
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||
|
|
* Attention: This software (modified or not) and binary are used for
|
||
|
|
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||
|
|
*******************************************************************************/
|
||
|
|
#ifndef __CH32V20x_SPI_H
|
||
|
|
#define __CH32V20x_SPI_H
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#include "ch32v20x.h"
|
||
|
|
|
||
|
|
/* SPI Init structure definition */
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
uint16_t SPI_Direction; /* Specifies the SPI unidirectional or bidirectional data mode.
|
||
|
|
This parameter can be a value of @ref SPI_data_direction */
|
||
|
|
|
||
|
|
uint16_t SPI_Mode; /* Specifies the SPI operating mode.
|
||
|
|
This parameter can be a value of @ref SPI_mode */
|
||
|
|
|
||
|
|
uint16_t SPI_DataSize; /* Specifies the SPI data size.
|
||
|
|
This parameter can be a value of @ref SPI_data_size */
|
||
|
|
|
||
|
|
uint16_t SPI_CPOL; /* Specifies the serial clock steady state.
|
||
|
|
This parameter can be a value of @ref SPI_Clock_Polarity */
|
||
|
|
|
||
|
|
uint16_t SPI_CPHA; /* Specifies the clock active edge for the bit capture.
|
||
|
|
This parameter can be a value of @ref SPI_Clock_Phase */
|
||
|
|
|
||
|
|
uint16_t SPI_NSS; /* Specifies whether the NSS signal is managed by
|
||
|
|
hardware (NSS pin) or by software using the SSI bit.
|
||
|
|
This parameter can be a value of @ref SPI_Slave_Select_management */
|
||
|
|
|
||
|
|
uint16_t SPI_BaudRatePrescaler; /* Specifies the Baud Rate prescaler value which will be
|
||
|
|
used to configure the transmit and receive SCK clock.
|
||
|
|
This parameter can be a value of @ref SPI_BaudRate_Prescaler.
|
||
|
|
@note The communication clock is derived from the master
|
||
|
|
clock. The slave clock does not need to be set. */
|
||
|
|
|
||
|
|
uint16_t SPI_FirstBit; /* Specifies whether data transfers start from MSB or LSB bit.
|
||
|
|
This parameter can be a value of @ref SPI_MSB_LSB_transmission */
|
||
|
|
|
||
|
|
uint16_t SPI_CRCPolynomial; /* Specifies the polynomial used for the CRC calculation. */
|
||
|
|
} SPI_InitTypeDef;
|
||
|
|
|
||
|
|
/* I2S Init structure definition */
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
uint16_t I2S_Mode; /* Specifies the I2S operating mode.
|
||
|
|
This parameter can be a value of @ref I2S_Mode */
|
||
|
|
|
||
|
|
uint16_t I2S_Standard; /* Specifies the standard used for the I2S communication.
|
||
|
|
This parameter can be a value of @ref I2S_Standard */
|
||
|
|
|
||
|
|
uint16_t I2S_DataFormat; /* Specifies the data format for the I2S communication.
|
||
|
|
This parameter can be a value of @ref I2S_Data_Format */
|
||
|
|
|
||
|
|
uint16_t I2S_MCLKOutput; /* Specifies whether the I2S MCLK output is enabled or not.
|
||
|
|
This parameter can be a value of @ref I2S_MCLK_Output */
|
||
|
|
|
||
|
|
uint32_t I2S_AudioFreq; /* Specifies the frequency selected for the I2S communication.
|
||
|
|
This parameter can be a value of @ref I2S_Audio_Frequency */
|
||
|
|
|
||
|
|
uint16_t I2S_CPOL; /* Specifies the idle state of the I2S clock.
|
||
|
|
This parameter can be a value of @ref I2S_Clock_Polarity */
|
||
|
|
} I2S_InitTypeDef;
|
||
|
|
|
||
|
|
/* SPI_data_direction */
|
||
|
|
#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000)
|
||
|
|
#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400)
|
||
|
|
#define SPI_Direction_1Line_Rx ((uint16_t)0x8000)
|
||
|
|
#define SPI_Direction_1Line_Tx ((uint16_t)0xC000)
|
||
|
|
|
||
|
|
/* SPI_mode */
|
||
|
|
#define SPI_Mode_Master ((uint16_t)0x0104)
|
||
|
|
#define SPI_Mode_Slave ((uint16_t)0x0000)
|
||
|
|
|
||
|
|
/* SPI_data_size */
|
||
|
|
#define SPI_DataSize_16b ((uint16_t)0x0800)
|
||
|
|
#define SPI_DataSize_8b ((uint16_t)0x0000)
|
||
|
|
|
||
|
|
/* SPI_Clock_Polarity */
|
||
|
|
#define SPI_CPOL_Low ((uint16_t)0x0000)
|
||
|
|
#define SPI_CPOL_High ((uint16_t)0x0002)
|
||
|
|
|
||
|
|
/* SPI_Clock_Phase */
|
||
|
|
#define SPI_CPHA_1Edge ((uint16_t)0x0000)
|
||
|
|
#define SPI_CPHA_2Edge ((uint16_t)0x0001)
|
||
|
|
|
||
|
|
/* SPI_Slave_Select_management */
|
||
|
|
#define SPI_NSS_Soft ((uint16_t)0x0200)
|
||
|
|
#define SPI_NSS_Hard ((uint16_t)0x0000)
|
||
|
|
|
||
|
|
/* SPI_BaudRate_Prescaler */
|
||
|
|
#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000)
|
||
|
|
#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008)
|
||
|
|
#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010)
|
||
|
|
#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018)
|
||
|
|
#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020)
|
||
|
|
#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028)
|
||
|
|
#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030)
|
||
|
|
#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038)
|
||
|
|
|
||
|
|
/* SPI_MSB_LSB_transmission */
|
||
|
|
#define SPI_FirstBit_MSB ((uint16_t)0x0000)
|
||
|
|
#define SPI_FirstBit_LSB ((uint16_t)0x0080)
|
||
|
|
|
||
|
|
/* I2S_Mode */
|
||
|
|
#define I2S_Mode_SlaveTx ((uint16_t)0x0000)
|
||
|
|
#define I2S_Mode_SlaveRx ((uint16_t)0x0100)
|
||
|
|
#define I2S_Mode_MasterTx ((uint16_t)0x0200)
|
||
|
|
#define I2S_Mode_MasterRx ((uint16_t)0x0300)
|
||
|
|
|
||
|
|
/* I2S_Standard */
|
||
|
|
#define I2S_Standard_Phillips ((uint16_t)0x0000)
|
||
|
|
#define I2S_Standard_MSB ((uint16_t)0x0010)
|
||
|
|
#define I2S_Standard_LSB ((uint16_t)0x0020)
|
||
|
|
#define I2S_Standard_PCMShort ((uint16_t)0x0030)
|
||
|
|
#define I2S_Standard_PCMLong ((uint16_t)0x00B0)
|
||
|
|
|
||
|
|
/* I2S_Data_Format */
|
||
|
|
#define I2S_DataFormat_16b ((uint16_t)0x0000)
|
||
|
|
#define I2S_DataFormat_16bextended ((uint16_t)0x0001)
|
||
|
|
#define I2S_DataFormat_24b ((uint16_t)0x0003)
|
||
|
|
#define I2S_DataFormat_32b ((uint16_t)0x0005)
|
||
|
|
|
||
|
|
/* I2S_MCLK_Output */
|
||
|
|
#define I2S_MCLKOutput_Enable ((uint16_t)0x0200)
|
||
|
|
#define I2S_MCLKOutput_Disable ((uint16_t)0x0000)
|
||
|
|
|
||
|
|
/* I2S_Audio_Frequency */
|
||
|
|
#define I2S_AudioFreq_192k ((uint32_t)192000)
|
||
|
|
#define I2S_AudioFreq_96k ((uint32_t)96000)
|
||
|
|
#define I2S_AudioFreq_48k ((uint32_t)48000)
|
||
|
|
#define I2S_AudioFreq_44k ((uint32_t)44100)
|
||
|
|
#define I2S_AudioFreq_32k ((uint32_t)32000)
|
||
|
|
#define I2S_AudioFreq_22k ((uint32_t)22050)
|
||
|
|
#define I2S_AudioFreq_16k ((uint32_t)16000)
|
||
|
|
#define I2S_AudioFreq_11k ((uint32_t)11025)
|
||
|
|
#define I2S_AudioFreq_8k ((uint32_t)8000)
|
||
|
|
#define I2S_AudioFreq_Default ((uint32_t)2)
|
||
|
|
|
||
|
|
/* I2S_Clock_Polarity */
|
||
|
|
#define I2S_CPOL_Low ((uint16_t)0x0000)
|
||
|
|
#define I2S_CPOL_High ((uint16_t)0x0008)
|
||
|
|
|
||
|
|
/* SPI_I2S_DMA_transfer_requests */
|
||
|
|
#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002)
|
||
|
|
#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001)
|
||
|
|
|
||
|
|
/* SPI_NSS_internal_software_management */
|
||
|
|
#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100)
|
||
|
|
#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF)
|
||
|
|
|
||
|
|
/* SPI_CRC_Transmit_Receive */
|
||
|
|
#define SPI_CRC_Tx ((uint8_t)0x00)
|
||
|
|
#define SPI_CRC_Rx ((uint8_t)0x01)
|
||
|
|
|
||
|
|
/* SPI_direction_transmit_receive */
|
||
|
|
#define SPI_Direction_Rx ((uint16_t)0xBFFF)
|
||
|
|
#define SPI_Direction_Tx ((uint16_t)0x4000)
|
||
|
|
|
||
|
|
/* SPI_I2S_interrupts_definition */
|
||
|
|
#define SPI_I2S_IT_TXE ((uint8_t)0x71)
|
||
|
|
#define SPI_I2S_IT_RXNE ((uint8_t)0x60)
|
||
|
|
#define SPI_I2S_IT_ERR ((uint8_t)0x50)
|
||
|
|
#define SPI_I2S_IT_OVR ((uint8_t)0x56)
|
||
|
|
#define SPI_IT_MODF ((uint8_t)0x55)
|
||
|
|
#define SPI_IT_CRCERR ((uint8_t)0x54)
|
||
|
|
#define I2S_IT_UDR ((uint8_t)0x53)
|
||
|
|
|
||
|
|
/* SPI_I2S_flags_definition */
|
||
|
|
#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001)
|
||
|
|
#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002)
|
||
|
|
#define I2S_FLAG_CHSIDE ((uint16_t)0x0004)
|
||
|
|
#define I2S_FLAG_UDR ((uint16_t)0x0008)
|
||
|
|
#define SPI_FLAG_CRCERR ((uint16_t)0x0010)
|
||
|
|
#define SPI_FLAG_MODF ((uint16_t)0x0020)
|
||
|
|
#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040)
|
||
|
|
#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080)
|
||
|
|
|
||
|
|
void SPI_I2S_DeInit(SPI_TypeDef *SPIx);
|
||
|
|
void SPI_Init(SPI_TypeDef *SPIx, SPI_InitTypeDef *SPI_InitStruct);
|
||
|
|
void I2S_Init(SPI_TypeDef *SPIx, I2S_InitTypeDef *I2S_InitStruct);
|
||
|
|
void SPI_StructInit(SPI_InitTypeDef *SPI_InitStruct);
|
||
|
|
void I2S_StructInit(I2S_InitTypeDef *I2S_InitStruct);
|
||
|
|
void SPI_Cmd(SPI_TypeDef *SPIx, FunctionalState NewState);
|
||
|
|
void I2S_Cmd(SPI_TypeDef *SPIx, FunctionalState NewState);
|
||
|
|
void SPI_I2S_ITConfig(SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState);
|
||
|
|
void SPI_I2S_DMACmd(SPI_TypeDef *SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState);
|
||
|
|
void SPI_I2S_SendData(SPI_TypeDef *SPIx, uint16_t Data);
|
||
|
|
uint16_t SPI_I2S_ReceiveData(SPI_TypeDef *SPIx);
|
||
|
|
void SPI_NSSInternalSoftwareConfig(SPI_TypeDef *SPIx, uint16_t SPI_NSSInternalSoft);
|
||
|
|
void SPI_SSOutputCmd(SPI_TypeDef *SPIx, FunctionalState NewState);
|
||
|
|
void SPI_DataSizeConfig(SPI_TypeDef *SPIx, uint16_t SPI_DataSize);
|
||
|
|
void SPI_TransmitCRC(SPI_TypeDef *SPIx);
|
||
|
|
void SPI_CalculateCRC(SPI_TypeDef *SPIx, FunctionalState NewState);
|
||
|
|
uint16_t SPI_GetCRC(SPI_TypeDef *SPIx, uint8_t SPI_CRC);
|
||
|
|
uint16_t SPI_GetCRCPolynomial(SPI_TypeDef *SPIx);
|
||
|
|
void SPI_BiDirectionalLineConfig(SPI_TypeDef *SPIx, uint16_t SPI_Direction);
|
||
|
|
FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef *SPIx, uint16_t SPI_I2S_FLAG);
|
||
|
|
void SPI_I2S_ClearFlag(SPI_TypeDef *SPIx, uint16_t SPI_I2S_FLAG);
|
||
|
|
ITStatus SPI_I2S_GetITStatus(SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT);
|
||
|
|
void SPI_I2S_ClearITPendingBit(SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT);
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif
|