initial WIP
lots of code copied over, things filled in to hopefully get the LED matrix lighting up. untested.
This commit is contained in:
true
411
firmware/periph/src/ch32x035_rcc.c
Normal file
411
firmware/periph/src/ch32x035_rcc.c
Normal file
@@ -0,0 +1,411 @@
|
||||
/********************************** (C) COPYRIGHT *******************************
|
||||
* File Name : ch32x035_rcc.c
|
||||
* Author : WCH
|
||||
* Version : V1.0.0
|
||||
* Date : 2023/04/06
|
||||
* Description : This file provides all the RCC firmware functions.
|
||||
*********************************************************************************
|
||||
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
||||
* Attention: This software (modified or not) and binary are used for
|
||||
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
||||
*******************************************************************************/
|
||||
#include "ch32x035_rcc.h"
|
||||
|
||||
/* RCC registers bit mask */
|
||||
|
||||
/* CTLR register bit mask */
|
||||
#define CTLR_HSITRIM_Mask ((uint32_t)0xFFFFFF07)
|
||||
|
||||
/* CFGR0 register bit mask */
|
||||
#define CFGR0_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F)
|
||||
#define CFGR0_HPRE_Set_Mask ((uint32_t)0x000000F0)
|
||||
|
||||
/* RSTSCKR register bit mask */
|
||||
#define RSTSCKR_RMVF_Set ((uint32_t)0x01000000)
|
||||
|
||||
/* RCC Flag Mask */
|
||||
#define FLAG_Mask ((uint8_t)0x1F)
|
||||
|
||||
/* CFGR0 register byte 4 (Bits[31:24]) base address */
|
||||
#define CFGR0_BYTE4_ADDRESS ((uint32_t)0x40021007)
|
||||
|
||||
|
||||
static __I uint8_t APBAHBPrescTable[16] = {1, 2, 3, 4, 5, 6, 7, 8, 1, 2, 3, 4, 5, 6, 7, 8};
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_DeInit
|
||||
*
|
||||
* @brief Resets the RCC clock configuration to the default reset state.
|
||||
* Note-
|
||||
* HSE can not be stopped if it is used directly or through the PLL as system clock.
|
||||
* @return none
|
||||
*/
|
||||
void RCC_DeInit(void)
|
||||
{
|
||||
RCC->CTLR |= (uint32_t)0x00000001;
|
||||
RCC->CFGR0 |= (uint32_t)0x00000050;
|
||||
RCC->CFGR0 &= (uint32_t)0xF8FFFF5F;
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_AdjustHSICalibrationValue
|
||||
*
|
||||
* @brief Adjusts the Internal High Speed oscillator (HSI) calibration value.
|
||||
*
|
||||
* @param HSICalibrationValue - specifies the calibration trimming value.
|
||||
* This parameter must be a number between 0 and 0x1F.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue)
|
||||
{
|
||||
uint32_t tmpreg = 0;
|
||||
|
||||
tmpreg = RCC->CTLR;
|
||||
tmpreg &= CTLR_HSITRIM_Mask;
|
||||
tmpreg |= (uint32_t)HSICalibrationValue << 3;
|
||||
RCC->CTLR = tmpreg;
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_HSICmd
|
||||
*
|
||||
* @brief Enables or disables the Internal High Speed oscillator (HSI).
|
||||
*
|
||||
* @param NewState - ENABLE or DISABLE.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void RCC_HSICmd(FunctionalState NewState)
|
||||
{
|
||||
if(NewState)
|
||||
{
|
||||
RCC->CTLR |= (1<<0);
|
||||
}
|
||||
else{
|
||||
RCC->CTLR &= ~(1<<0);
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_HCLKConfig
|
||||
*
|
||||
* @brief Configures the AHB clock (HCLK).
|
||||
*
|
||||
* @param RCC_SYSCLK - defines the AHB clock divider. This clock is derived from
|
||||
* the system clock (SYSCLK).
|
||||
* RCC_SYSCLK_Div1 - AHB clock = SYSCLK.
|
||||
* RCC_SYSCLK_Div2 - AHB clock = SYSCLK/2.
|
||||
* RCC_SYSCLK_Div3 - AHB clock = SYSCLK/3.
|
||||
* RCC_SYSCLK_Div4 - AHB clock = SYSCLK/4.
|
||||
* RCC_SYSCLK_Div5 - AHB clock = SYSCLK/5.
|
||||
* RCC_SYSCLK_Div6 - AHB clock = SYSCLK/6.
|
||||
* RCC_SYSCLK_Div7 - AHB clock = SYSCLK/7.
|
||||
* RCC_SYSCLK_Div8 - AHB clock = SYSCLK/8.
|
||||
* RCC_SYSCLK_Div16 - AHB clock = SYSCLK/16.
|
||||
* RCC_SYSCLK_Div32 - AHB clock = SYSCLK/32.
|
||||
* RCC_SYSCLK_Div64 - AHB clock = SYSCLK/64.
|
||||
* RCC_SYSCLK_Div128 - AHB clock = SYSCLK/128.
|
||||
* RCC_SYSCLK_Div256 - AHB clock = SYSCLK/256.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void RCC_HCLKConfig(uint32_t RCC_SYSCLK)
|
||||
{
|
||||
uint32_t tmpreg = 0;
|
||||
|
||||
tmpreg = RCC->CFGR0;
|
||||
tmpreg &= CFGR0_HPRE_Reset_Mask;
|
||||
tmpreg |= RCC_SYSCLK;
|
||||
RCC->CFGR0 = tmpreg;
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_GetClocksFreq
|
||||
*
|
||||
* @brief The result of this function could be not correct when using
|
||||
* fractional value for HSE crystal.
|
||||
*
|
||||
* @param RCC_Clocks - pointer to a RCC_ClocksTypeDef structure which will hold
|
||||
* the clocks frequencies.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks)
|
||||
{
|
||||
uint32_t tmp = 0, presc = 0;
|
||||
|
||||
RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
|
||||
|
||||
tmp = RCC->CFGR0 & CFGR0_HPRE_Set_Mask;
|
||||
tmp = tmp >> 4;
|
||||
presc = APBAHBPrescTable[tmp];
|
||||
|
||||
if(((RCC->CFGR0 & CFGR0_HPRE_Set_Mask) >> 4) < 8)
|
||||
{
|
||||
RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency / presc;
|
||||
}
|
||||
else
|
||||
{
|
||||
RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc;
|
||||
}
|
||||
|
||||
RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency;
|
||||
RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency;
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_AHBPeriphClockCmd
|
||||
*
|
||||
* @brief Enables or disables the AHB peripheral clock.
|
||||
*
|
||||
* @param RCC_AHBPeriph - specifies the AHB peripheral to gates its clock.
|
||||
* RCC_AHBPeriph_DMA1.
|
||||
* RCC_AHBPeriph_SRAM.
|
||||
* RCC_AHBPeriph_USBFS.
|
||||
* RCC_AHBPeriph_USBPD
|
||||
* Note-
|
||||
* SRAM clock can be disabled only during sleep mode.
|
||||
* NewState: ENABLE or DISABLE.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
|
||||
{
|
||||
if (NewState != DISABLE)
|
||||
{
|
||||
RCC->AHBPCENR |= RCC_AHBPeriph;
|
||||
}
|
||||
else
|
||||
{
|
||||
RCC->AHBPCENR &= ~RCC_AHBPeriph;
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_APB2PeriphClockCmd
|
||||
*
|
||||
* @brief Enables or disables the High Speed APB (APB2) peripheral clock.
|
||||
*
|
||||
* @param RCC_APB2Periph - specifies the APB2 peripheral to gates its clock.
|
||||
* RCC_APB2Periph_AFIO.
|
||||
* RCC_APB2Periph_GPIOA.
|
||||
* RCC_APB2Periph_GPIOB.
|
||||
* RCC_APB2Periph_GPIOC.
|
||||
* RCC_APB2Periph_ADC1.
|
||||
* RCC_APB2Periph_TIM1.
|
||||
* RCC_APB2Periph_SPI1.
|
||||
* RCC_APB2Periph_USART1.
|
||||
* NewState - ENABLE or DISABLE
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
|
||||
{
|
||||
if (NewState != DISABLE)
|
||||
{
|
||||
RCC->APB2PCENR |= RCC_APB2Periph;
|
||||
}
|
||||
else
|
||||
{
|
||||
RCC->APB2PCENR &= ~RCC_APB2Periph;
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_APB1PeriphClockCmd
|
||||
*
|
||||
* @brief Enables or disables the Low Speed APB (APB1) peripheral clock.
|
||||
*
|
||||
* @param RCC_APB1Periph - specifies the APB1 peripheral to gates its clock.
|
||||
* RCC_APB1Periph_TIM2.
|
||||
* RCC_APB1Periph_TIM3.
|
||||
* RCC_APB1Periph_WWDG.
|
||||
* RCC_APB1Periph_USART2.
|
||||
* RCC_APB1Periph_USART3.
|
||||
* RCC_APB1Periph_USART4
|
||||
* RCC_APB1Periph_I2C1.
|
||||
* RCC_APB1Periph_PWR.
|
||||
* NewState - ENABLE or DISABLE.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
|
||||
{
|
||||
if (NewState != DISABLE)
|
||||
{
|
||||
RCC->APB1PCENR |= RCC_APB1Periph;
|
||||
}
|
||||
else
|
||||
{
|
||||
RCC->APB1PCENR &= ~RCC_APB1Periph;
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_AHBPeriphResetCmd
|
||||
*
|
||||
* @brief Forces or releases AHB peripheral reset.
|
||||
*
|
||||
* @param RCC_AHBPeriph - specifies the AHB peripheral to reset.
|
||||
* RCC_AHBPeriph_USBFS.
|
||||
* RCC_AHBPeriph_IO2W.
|
||||
* RCC_AHBPeriph_USBPD.
|
||||
* NewState: ENABLE or DISABLE.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
|
||||
{
|
||||
if (NewState != DISABLE)
|
||||
{
|
||||
RCC->AHBPCENR |= RCC_AHBPeriph;
|
||||
}
|
||||
else
|
||||
{
|
||||
RCC->AHBPCENR &= ~RCC_AHBPeriph;
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_APB2PeriphResetCmd
|
||||
*
|
||||
* @brief Forces or releases APB (APB2) peripheral reset.
|
||||
*
|
||||
* @param RCC_APB2Periph - specifies the APB2 peripheral to reset.
|
||||
* RCC_APB2Periph_AFIO.
|
||||
* RCC_APB2Periph_GPIOA.
|
||||
* RCC_APB2Periph_GPIOB.
|
||||
* RCC_APB2Periph_GPIOC.
|
||||
* RCC_APB2Periph_ADC1.
|
||||
* RCC_APB2Periph_TIM1.
|
||||
* RCC_APB2Periph_SPI1.
|
||||
* RCC_APB2Periph_USART1.
|
||||
* NewState - ENABLE or DISABLE
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
|
||||
{
|
||||
if (NewState != DISABLE)
|
||||
{
|
||||
RCC->APB2PRSTR |= RCC_APB2Periph;
|
||||
}
|
||||
else
|
||||
{
|
||||
RCC->APB2PRSTR &= ~RCC_APB2Periph;
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_APB1PeriphResetCmd
|
||||
*
|
||||
* @brief Forces or releases APB (APB1) peripheral reset.
|
||||
*
|
||||
* @param RCC_APB1Periph - specifies the APB1 peripheral to reset.
|
||||
* RCC_APB1Periph_TIM2.
|
||||
* RCC_APB1Periph_TIM3.
|
||||
* RCC_APB1Periph_WWDG.
|
||||
* RCC_APB1Periph_USART2.
|
||||
* RCC_APB1Periph_USART3.
|
||||
* RCC_APB1Periph_USART4
|
||||
* RCC_APB1Periph_I2C1.
|
||||
* RCC_APB1Periph_PWR.
|
||||
* NewState - ENABLE or DISABLE.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
|
||||
{
|
||||
if (NewState != DISABLE)
|
||||
{
|
||||
RCC->APB1PRSTR |= RCC_APB1Periph;
|
||||
}
|
||||
else
|
||||
{
|
||||
RCC->APB1PRSTR &= ~RCC_APB1Periph;
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_MCOConfig
|
||||
*
|
||||
* @brief Selects the clock source to output on MCO pin.
|
||||
*
|
||||
* @param RCC_MCO - specifies the clock source to output.
|
||||
* RCC_MCO_NoClock - No clock selected.
|
||||
* RCC_MCO_SYSCLK - System clock selected.
|
||||
* RCC_MCO_HSI - HSI oscillator clock selected.
|
||||
*
|
||||
* @return none
|
||||
*/
|
||||
void RCC_MCOConfig(uint8_t RCC_MCO)
|
||||
{
|
||||
*(__IO uint8_t *) CFGR0_BYTE4_ADDRESS = RCC_MCO;
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_GetFlagStatus
|
||||
*
|
||||
* @brief Checks whether the specified RCC flag is set or not.
|
||||
*
|
||||
* @param RCC_FLAG - specifies the flag to check.
|
||||
* RCC_FLAG_HSIRDY - HSI oscillator clock ready.
|
||||
* RCC_FLAG_OPARST - OPA reset.
|
||||
* RCC_FLAG_PINRST - Pin reset.
|
||||
* RCC_FLAG_PORRST - POR/PDR reset.
|
||||
* RCC_FLAG_SFTRST - Software reset.
|
||||
* RCC_FLAG_IWDGRST - Independent Watchdog reset.
|
||||
* RCC_FLAG_WWDGRST - Window Watchdog reset.
|
||||
* RCC_FLAG_LPWRRST - Low Power reset.
|
||||
*
|
||||
* @return FlagStatus - SET or RESET.
|
||||
*/
|
||||
FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG)
|
||||
{
|
||||
uint32_t tmp = 0;
|
||||
uint32_t statusreg = 0;
|
||||
|
||||
FlagStatus bitstatus = RESET;
|
||||
tmp = RCC_FLAG >> 5;
|
||||
|
||||
if (tmp == 1)
|
||||
{
|
||||
statusreg = RCC->CTLR;
|
||||
}
|
||||
else
|
||||
{
|
||||
statusreg = RCC->RSTSCKR;
|
||||
}
|
||||
|
||||
tmp = RCC_FLAG & FLAG_Mask;
|
||||
|
||||
if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET)
|
||||
{
|
||||
bitstatus = SET;
|
||||
}
|
||||
else
|
||||
{
|
||||
bitstatus = RESET;
|
||||
}
|
||||
|
||||
return bitstatus;
|
||||
}
|
||||
|
||||
/*********************************************************************
|
||||
* @fn RCC_ClearFlag
|
||||
*
|
||||
* @brief Clears the RCC reset flags.
|
||||
* Note-
|
||||
* The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
|
||||
* RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
|
||||
* @return none
|
||||
*/
|
||||
void RCC_ClearFlag(void)
|
||||
{
|
||||
RCC->RSTSCKR |= RSTSCKR_RMVF_Set;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user