From 88162e29357ddbb11c4e710a42ef52fecd0a6c96 Mon Sep 17 00:00:00 2001
From: Brooke <brookep447@gmail.com>
Date: Sun, 4 May 2025 22:15:06 -0400
Subject: [PATCH] make sure initial code run clears running state and goes into
 standby

---
 .../.vs/HackSpaceCon_AS7/v14/.atsuo           | Bin 74752 -> 74752 bytes
 fw/HackSpaceCon_AS7/HSC_Wand/wand_program.cpp |  11 +++++++----
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/fw/HackSpaceCon_AS7/.vs/HackSpaceCon_AS7/v14/.atsuo b/fw/HackSpaceCon_AS7/.vs/HackSpaceCon_AS7/v14/.atsuo
index 2c86507a1bc9fdbb146a5f2ace853c43539220cb..385d0985243e96edaa9162f9866c113981742437 100644
GIT binary patch
delta 181
zcmZoT!P0PoWr6`C(?mmQM&^ya@@#A$rhMC%xOa0A+c8F42?hoRZXo^-1yVq^4iNtX
z@}+?^3lIwdu?P_J0kJ3$cLA|15bI7ZWib|o=~MxV=m9ZE=l{)nIg%AOE2unR+@zzx
zwpl^w5#weilYgp<!k8vIC`U|gP}ADnq*TW!(2!VWbjqZAL6K?m$Dc~&Wt#=!J{$!A
DtrI~5

delta 153
zcmZoT!P0PoWrD%vf<VrRmcopT8-3;3ST9VR$*^T}AyYr&Bn}Hr5e5bZZXnhN;{QM(
z1*Ii`v@{U20I?7d|C^l1;w%YL0RwtK(Z4{B3P^VIUXEnN%?d&f7&qxCux(aQdBC{H
fL~ZiKF3HW38qXOgg_tnvY&H$K&AeG4;lp77G+Q~z

diff --git a/fw/HackSpaceCon_AS7/HSC_Wand/wand_program.cpp b/fw/HackSpaceCon_AS7/HSC_Wand/wand_program.cpp
index edb92c8..6af0c65 100644
--- a/fw/HackSpaceCon_AS7/HSC_Wand/wand_program.cpp
+++ b/fw/HackSpaceCon_AS7/HSC_Wand/wand_program.cpp
@@ -112,6 +112,9 @@ void setup() {
 	// set up the RGB ~61Hz periodic timer
 	conf_rgb_timer();
 	
+	// clear initial setup
+	rgb_run_next = 1;
+	
 	// enable global interrupts (though they should already be enabled?)
 	sei();
 }
@@ -145,7 +148,7 @@ void loop() {
 
 			enable_rgb_timer();					// then start the RGB program timebase.
 
-			sleep_cpu(SLPCTRL_SMODE_IDLE_gc);	// we can idle CPU after running the program
+			sleep_cpu(SLEEP_MODE_IDLE);			// we can idle CPU after running the program
 
 			break;
 		}
@@ -158,7 +161,7 @@ void loop() {
 				break;
 			}
 
-			sleep_cpu(SLPCTRL_SMODE_IDLE_gc);	// we can idle CPU after running the program
+			sleep_cpu(SLEEP_MODE_IDLE);			// we can idle CPU after running the program
 
 			break;
 		}
@@ -167,7 +170,7 @@ void loop() {
 			rgb.show();							// send final updates to the led
 			run_rgbprog = RGB_IDLE;
 			
-			sleep_cpu(SLPCTRL_SMODE_IDLE_gc);	// we can idle CPU after running the program
+			sleep_cpu(SLEEP_MODE_IDLE);			// we can idle CPU after running the program
 			
 			break;
 		}
@@ -177,7 +180,7 @@ void loop() {
 			digitalWrite(PIN_LED_PWRENA, LOW);	// disable LED power supply,
 			run_rgbprog = RGB_IDLE;				// and clear run_rgbprog.
 
-			sleep_cpu(SLPCTRL_SMODE_STDBY_gc);	// finally, go to sleep in standby mode
+			sleep_cpu(SLEEP_MODE_STANDBY);		// finally, go to sleep in standby mode
 
 			break;
 		}