OrcaSlicer-bambulab/resources/profiles/Wanhao France/filament/YUMI PETG.json

{
    "type": "filament",
    "name": "YUMI PETG",
    "inherits": "Yumi Generic PETG",
    "from": "system",
    "setting_id": "GFSA04",
    "filament_id": "GFG99",
    "instantiation": "true",
    "filament_vendor": [
        "Yumi"
    ],
    "filament_settings_id": [
        "YUMI PETG"
    ],
    "filament_type": [
        "PETG"
    ],
    "filament_flow_ratio": [
        "0.95"
    ],
    "filament_max_volumetric_speed": [
        "8"
    ],
    "nozzle_temperature": [
        "230"
    ],
    "activate_air_filtration": [
        "0"
    ],
    "activate_chamber_temp_control": [
        "0"
    ],
    "additional_cooling_fan_speed": [
        "70"
    ],
    "bed_type": [
        "Cool Plate"
    ],
    "chamber_temperature": [
        "0"
    ],
    "close_fan_the_first_x_layers": [
        "5"
    ],
    "compatible_printers_condition": "",
    "compatible_prints": [],
    "compatible_prints_condition": "",
    "complete_print_exhaust_fan_speed": [
        "80"
    ],
    "cool_plate_temp": [
        "35"
    ],
    "cool_plate_temp_initial_layer": [
        "35"
    ],
    "default_filament_colour": [
        ""
    ],
    "during_print_exhaust_fan_speed": [
        "60"
    ],
    "enable_overhang_bridge_fan": [
        "1"
    ],
    "enable_pressure_advance": [
        "0"
    ],
    "eng_plate_temp": [
        "0"
    ],
    "eng_plate_temp_initial_layer": [
        "0"
    ],
    "fan_cooling_layer_time": [
        "20"
    ],
    "fan_max_speed": [
        "80"
    ],
    "fan_min_speed": [
        "15"
    ],
    "filament_cooling_final_speed": [
        "0"
    ],
    "filament_cooling_initial_speed": [
        "0"
    ],
    "filament_cooling_moves": [
        "0"
    ],
    "filament_cost": [
        "0"
    ],
    "filament_density": [
        "0"
    ],
    "filament_deretraction_speed": [
        "80"
    ],
    "filament_diameter": [
        "1.75"
    ],
    "filament_end_gcode": [
        "; filament end gcode \n"
    ],
    "filament_is_support": [
        "0"
    ],
    "filament_load_time": [
        "42"
    ],
    "filament_loading_speed": [
        "0"
    ],
    "filament_loading_speed_start": [
        "0"
    ],
    "filament_long_retractions_when_cut": [
        "nil"
    ],
    "filament_minimal_purge_on_wipe_tower": [
        "15"
    ],
    "filament_multitool_ramming": [
        "0"
    ],
    "filament_multitool_ramming_flow": [
        "10"
    ],
    "filament_multitool_ramming_volume": [
        "10"
    ],
    "filament_notes": [
        ""
    ],
    "filament_ramming_parameters": [
        "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
    ],
    "filament_retract_before_wipe": [
        "80%"
    ],
    "filament_retract_lift_above": [
        "nil"
    ],
    "filament_retract_lift_below": [
        "nil"
    ],
    "filament_retract_lift_enforce": [
        "nil"
    ],
    "filament_retract_restart_extra": [
        "nil"
    ],
    "filament_retract_when_changing_layer": [
        "1"
    ],
    "filament_retraction_distances_when_cut": [
        "nil"
    ],
    "filament_retraction_length": [
        "2"
    ],
    "filament_retraction_minimum_travel": [
        "1"
    ],
    "filament_retraction_speed": [
        "80"
    ],
    "filament_shrink": [
        "100%"
    ],
    "filament_soluble": [
        "0"
    ],
    "filament_start_gcode": [
        "; filament start gcode\n"
    ],
    "filament_toolchange_delay": [
        "0"
    ],
    "filament_unload_time": [
        "0"
    ],
    "filament_unloading_speed": [
        "0"
    ],
    "filament_unloading_speed_start": [
        "0"
    ],
    "filament_wipe": [
        "1"
    ],
    "filament_wipe_distance": [
        "nil"
    ],
    "filament_z_hop": [
        "nil"
    ],
    "filament_z_hop_types": [
        "nil"
    ],
    "full_fan_speed_layer": [
        "6"
    ],
    "hot_plate_temp": [
        "70"
    ],
    "hot_plate_temp_initial_layer": [
        "70"
    ],
    "nozzle_temperature_initial_layer": [
        "230"
    ],
    "nozzle_temperature_range_high": [
        "230"
    ],
    "nozzle_temperature_range_low": [
        "190"
    ],
    "overhang_fan_speed": [
        "90"
    ],
    "overhang_fan_threshold": [
        "50%"
    ],
    "pressure_advance": [
        "0.05"
    ],
    "reduce_fan_stop_start_freq": [
        "1"
    ],
    "required_nozzle_HRC": [
        "0"
    ],
    "slow_down_for_layer_cooling": [
        "1"
    ],
    "slow_down_layer_time": [
        "10"
    ],
    "slow_down_min_speed": [
        "25"
    ],
    "support_material_interface_fan_speed": [
        "-1"
    ],
    "temperature_vitrification": [
        "60"
    ],
    "textured_plate_temp": [
        "45"
    ],
    "textured_plate_temp_initial_layer": [
        "45"
    ],
    "compatible_printers": [
        "D12 230 PRO M2 DIRECT 0.4 nozzle",
        "D12 230 PRO SMARTPAD DIRECT 0.4 nozzle",
        "D12 300 PRO M2 DIRECT 0.4 nozzle",
        "D12 300 PRO SMARTPAD DIRECT 0.4 nozzle",
        "D12 500 PRO M2 DIRECT 0.4 nozzle",
        "D12 500 PRO SMARTPAD DIRECT 0.4 nozzle",
        "D12 230 PRO M2 MONO DUAL 0.4 nozzle",
        "D12 230 PRO M2 MONO DUAL PoopTool 0.4 nozzle",
        "D12 300 PRO M2 MONO DUAL PoopTool 0.4 nozzle",
        "D12 500 PRO M2 MONO DUAL PoopTool 0.4 nozzle",
        "D12 230 PRO SMARTPAD MONO DUAL 0.4 nozzle",
        "D12 230 PRO SMARTPAD MONO DUAL PoopTool 0.4 nozzle",
        "D12 300 PRO SMARTPAD MONO DUAL PoopTool 0.4 nozzle",
        "D12 500 PRO SMARTPAD MONO DUAL PoopTool 0.4 nozzle",
        "D12 300 PRO M2 MONO DUAL 0.4 nozzle",
        "D12 300 PRO SMARTPAD MONO DUAL 0.4 nozzle",
        "D12 500 PRO M2 MONO DUAL 0.4 nozzle",
        "D12 500 PRO SMARTPAD MONO DUAL 0.4 nozzle"
    ]
}