OrcaSlicer-bambulab/resources/profiles/Creality/machine/Creality K2 0.4 nozzle.json

{
  "type": "machine",
  "from": "system",
  "settings_id": "GM001",
  "instantiation": "true",
  "inherits": "fdm_creality_common",
  "printer_model": "Creality K2",
  "printer_settings_id": "Creality",
  "auxiliary_fan": "1",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
  "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y140 F30000\nG1 Z{z_after_toolchange} F600",
  "cooling_tube_length": "0",
  "cooling_tube_retraction": "0",
  "default_print_profile": "0.16mm Standard @Creality K2 0.4 nozzle",
  "emit_machine_limits_to_gcode": "1",
  "enable_filament_ramming": "0",
  "extra_loading_move": "0",
  "extruder_clearance_height_to_lid": "118",
  "extruder_clearance_height_to_rod": "24",
  "extruder_clearance_radius": "64",
  "fan_kickstart": "0",
  "fan_speedup_overhangs": "1",
  "fan_speedup_time": "0",
  "gcode_flavor": "klipper",
  "high_current_on_filament_swap": "0",
  "machine_end_gcode": "END_PRINT",
  "machine_load_filament_time": "0",
  "machine_max_acceleration_e": [
    "5000",
    "5000"
  ],
  "machine_max_acceleration_extruding": [
    "20000",
    "20000"
  ],
  "machine_max_acceleration_retracting": [
    "5000",
    "5000"
  ],
  "machine_max_acceleration_travel": [
    "20000",
    "20000"
  ],
  "machine_max_acceleration_x": [
    "20000",
    "20000"
  ],
  "machine_max_acceleration_y": [
    "20000",
    "20000"
  ],
  "machine_max_acceleration_z": [
    "100",
    "100"
  ],
  "machine_max_jerk_e": [
    "10",
    "10"
  ],
  "machine_max_jerk_x": [
    "100",
    "100"
  ],
  "machine_max_jerk_y": [
    "100",
    "100"
  ],
  "machine_max_jerk_z": [
    "5",
    "5"
  ],
  "machine_max_speed_e": [
    "50",
    "50"
  ],
  "machine_max_speed_x": [
    "800",
    "800"
  ],
  "machine_max_speed_y": [
    "800",
    "800"
  ],
  "machine_max_speed_z": [
    "5",
    "5"
  ],
  "machine_pause_gcode": "PAUSE",
  "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y130 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y130 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X130 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
  "machine_unload_filament_time": "0",
  "manual_filament_change": "0",
  "nozzle_type": "hardened_steel",
  "nozzle_volume": "183",
  "parking_pos_retraction": "0",
  "preferred_orientation": "0",
  "printable_area": [
    "0x0",
    "260x0",
    "260x260",
    "0x260"
  ],
  "printable_height": "260",
  "printer_technology": "FFF",
  "printer_variant": "0.4",
  "printhost_authorization_type": "key",
  "purge_in_prime_tower": "0",
  "scan_first_layer": "0",
  "silent_mode": "0",
  "single_extruder_multi_material": "1",
  "support_air_filtration": "1",
  "support_chamber_temp_control": "0",
  "support_multi_bed_types": "1",
  "thumbnails": [
    "300x300",
    "96x96"
  ],
  "thumbnails_format": "PNG",
  "use_firmware_retraction": "0",
  "use_relative_e_distances": "1",
  "z_offset": "0",
  "default_filament_profile": [
    "Creality Generic PLA @K2-all"
  ],
  "deretraction_speed": [
    "40"
  ],
  "extruder_colour": [
    "#FCE94F"
  ],
  "extruder_offset": [
    "0x0"
  ],
  "max_layer_height": [
    "0.32"
  ],
  "min_layer_height": [
    "0.08"
  ],
  "nozzle_diameter": [
    "0.4"
  ],
  "retract_before_wipe": [
    "70%"
  ],
  "retract_length_toolchange": [
    "0"
  ],
  "retract_lift_above": [
    "0"
  ],
  "retract_lift_below": [
    "259"
  ],
  "retract_restart_extra": [
    "0"
  ],
  "retract_restart_extra_toolchange": [
    "0"
  ],
  "retract_when_changing_layer": [
    "1"
  ],
  "retraction_length": [
    "0.8"
  ],
  "retraction_minimum_travel": [
    "1"
  ],
  "retraction_speed": [
    "40"
  ],
  "wipe": [
    "1"
  ],
  "wipe_distance": [
    "2"
  ],
  "z_hop": [
    "0.4"
  ],
  "name": "Creality K2 0.4 nozzle"
}