OrcaSlicer-bambulab/resources/profiles/M3D/machine/M3D Enabler D8500 MM.json

{
    "type": "machine",
    "name": "M3D Enabler D8500 MM",
    "inherits": "fdm_machine_common",
    "from": "system",
    "setting_id": "M3D_D8500_MM_04",
    "instantiation": "true",
    "printer_model": "M3D Enabler D8500 MM Model",
    "printer_variant": "0.4",
    "auxiliary_fan": "1",
    "change_filament_gcode": "M18 E",
    "deretraction_speed": [
        "50",
        "50"
    ],
    "extruder_clearance_height_to_rod": "19",
    "extruder_clearance_radius": "100",
    "extruder_colour": [
        "#FCE94F",
        "#FCE94F"
    ],
    "extruder_offset": [
        "0x0",
        "0x0"
    ],
    "fan_speedup_time": "1",
    "host_type": "esp3d",
    "long_retractions_when_cut": [
        "0",
        "0"
    ],
    "machine_end_gcode": "; ===== ORCA END GCODE =====\nM400\nM83\nG92 E0\nG1 E-17 F1800           ; retract BEFORE any moves or power changes\n\n; Now lift and park\nG91\nG1 Z2 F2000\nG90\nG1 X100 Y160 F3000      ; parking point\n\n; Power down in order\nM104 T0 S0\nM104 T1 S0\nM106 S50                ; keep fan at ~50% while cooling (adjust if desired)\n; (Leave steppers on by omitting M84)\n; ===== END ORCA END GCODE =====\n",
    "machine_load_filament_time": "0.5",
    "machine_max_acceleration_e": [
        "10000",
        "10000"
    ],
    "machine_max_acceleration_x": [
        "2000",
        "2000"
    ],
    "machine_max_acceleration_y": [
        "2000",
        "2000"
    ],
    "machine_max_acceleration_z": [
        "400",
        "400"
    ],
    "machine_max_speed_e": [
        "30",
        "30"
    ],
    "machine_max_speed_x": [
        "400",
        "400"
    ],
    "machine_max_speed_y": [
        "300",
        "300"
    ],
    "machine_max_speed_z": [
        "12",
        "12"
    ],
    "machine_start_gcode": "; ===== ORCA START GCODE =====\n; minx:{first_layer_print_min[0]}\n; miny:{first_layer_print_min[1]}\n; maxx:{first_layer_print_max[0]}\n; maxy:{first_layer_print_max[1]}\n; used_0:{is_extruder_used[0]}\n; used_1:{is_extruder_used[1]}\n\n; Heaters\n{if is_extruder_used[0]}M104 T0 S{first_layer_temperature[0]}{endif}\n{if !is_extruder_used[0]}M104 T0 S150{endif}\n{if is_extruder_used[1]}M104 T1 S{first_layer_temperature[1]}{endif}\n{if !is_extruder_used[1]}M104 T1 S150{endif}\nM140 S0\nM106 S50\n\n; Home and clearance\nG28 X Y\nG28 Z\nG91\nG1 Z10 F1200            ; lift 10mm\nG90\n\n; Bed wait (dummy)\nM190 S0\n\n; Wait for target temps\n{if is_extruder_used[0]}M109 T0 S{first_layer_temperature[0]}{endif}\n{if is_extruder_used[1]}M109 T1 S{first_layer_temperature[1]}{endif}\n\n; Absolute XYZ / Relative E\nG90\nM83\n\n; ===== Dynamic Bed Leveling ====\nT0\nG1 Z3 F3000\nG1 X15 Y15 F6000\nG1 Z0.25 F1000; Otherwise Orca displays with a 3mm height\n; Single probe touch\nG30\nM420 S1\n; Bias the contact as -0.25 and fix Z-zero\nG92 Z-0.25        ; probed contact now treated as Z = -0.25\nG1 Z0.3 F300\n\n; ===== PRIME / TWO-LINE WIPES (sparse, no air extrude) =====\n\n; --- Tool 0: lines at Y=5 and Y=6 ---\n{if is_extruder_used[0]}\nT0\nG92 E0\nG1 X20 Y5 F3000\nG1 Z0.30 F600\nG1 X180 E18 F700\nG1 Y6.0 F1200\nG1 X20 E18 F700\nG92 E0\n{endif}\n\n; --- Tool 1: lines at Y=7 and Y=8 ---\n{if is_extruder_used[1]}\nT1\nG92 E0\nG1 X20 Y7 F3000\nG1 Z0.30 F600\nG1 X180 E18 F700\nG1 Y8.0 F1200\nG1 X20 E18 F700\nG92 E0\n{endif}\n\n; Activate initial tool (no retracts; Orca starts immediately)\nT{initial_extruder}\nG92 E0\n; ===== END ORCA START GCODE =====\n",
    "machine_tool_change_time": "0.5",
    "machine_unload_filament_time": "0.5",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
    "machine_pause_gcode": "M601",
    "max_layer_height": [
        "0.32",
        "0.32"
    ],
    "min_layer_height": [
        "0.1",
        "0.1"
    ],
    "nozzle_diameter": [
        "0.4",
        "0.4"
    ],
    "nozzle_type": "brass",
    "print_host": "m3d-enabler.local",
    "printable_area": [
        "0x0",
        "210x0",
        "210x150",
        "0x150"
    ],
    "printer_settings_id": "M3D Enabler D8500 MM",
    "retract_before_wipe": [
        "100%",
        "100%"
    ],
    "retract_length_toolchange": [
        "17",
        "17"
    ],
    "retract_lift_above": [
        "0",
        "0"
    ],
    "retract_lift_below": [
        "0",
        "0"
    ],
    "retract_lift_enforce": [
        "All Surfaces",
        "All Surfaces"
    ],
    "retract_restart_extra": [
        "0",
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0",
        "0"
    ],
    "retract_when_changing_layer": [
        "1",
        "1"
    ],
    "retraction_distances_when_cut": [
        "18",
        "18"
    ],
    "retraction_length": [
        "4.5",
        "4.5"
    ],
    "retraction_minimum_travel": [
        "2.5",
        "2.5"
    ],
    "retraction_speed": [
        "60",
        "60"
    ],
    "single_extruder_multi_material": "0",
    "thumbnails": "120x60/PNG",
    "travel_slope": [
        "45",
        "45"
    ],
    "wipe": [
        "1",
        "1"
    ],
    "wipe_distance": [
        "2",
        "2"
    ],
    "z_hop": [
        "0",
        "0"
    ],
    "z_hop_types": [
        "Normal Lift",
        "Normal Lift"
    ]
}