Alessandro Ranellucci b422537cc4 Bugfix: do not die when no layers are detected at all

2011-12-15 20:36:46 +01:00

..

ExtrusionPath

Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89

2011-12-04 16:24:46 +01:00

Fill

Restored a little overlap between perimeters and infill (we're only explicitely overlapping in the direction of infill lines, because side overlap is handled by the flow logic in Extruder.pm)

2011-12-15 20:21:34 +01:00

Geometry

Slic3r should now be able to detect optimal bridging direction for any kind of bridge. #58

2011-12-02 23:35:39 +01:00

GUI

Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112

2011-12-13 17:34:31 +01:00

Polyline

Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112

2011-12-13 17:34:31 +01:00

TriangleMesh

…

Config.pm

Erorr in last commit about automatic extrusion width. #112

2011-12-15 12:50:02 +01:00

ExPolygon.pm

…

Extruder.pm

Comments are now disabled by default, new --gcode-comments option to enable them

2011-12-14 19:49:21 +01:00

ExtrusionLoop.pm

Bugfix: fatal error on many models. Releasing 0.5.5a. #92 #93

2011-12-05 12:15:52 +01:00

ExtrusionPath.pm

Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112

2011-12-13 17:34:31 +01:00

Fill.pm

Adjusted flow width for solid infills was ignored

2011-12-14 11:35:19 +01:00

Geometry.pm

Recent changes made Slic3r less tolerant with dirty STL files. Now we are able again to slice Prusa parts. #16

2011-12-04 19:10:43 +01:00

GUI.pm

…

Layer.pm

Take overlap into account for external dimensions

2011-12-14 11:21:43 +01:00

Line.pm

Slic3r should now be able to detect optimal bridging direction for any kind of bridge. #58

2011-12-02 23:35:39 +01:00

Perimeter.pm

Bugfix: 100% overlap between perimeter and infill. #118

2011-12-14 19:40:18 +01:00

Point.pm

…

Polygon.pm

…

Polyline.pm

Slic3r should now be able to detect optimal bridging direction for any kind of bridge. #58

2011-12-02 23:35:39 +01:00

Print.pm

Bugfix: do not die when no layers are detected at all

2011-12-15 20:36:46 +01:00

Skein.pm

Many fixes to the bridge direction detection algorithm and other things. #58

2011-12-03 18:31:31 +01:00

STL.pm

Accept STL files with spaces at the end of vertex lines. #119

2011-12-14 10:29:08 +01:00

Surface.pm

Many fixes to the bridge direction detection algorithm and other things. #58

2011-12-03 18:31:31 +01:00

SVG.pm

…

TriangleMesh.pm

Bugfix: models located very far from XYZ origin were incorrectly placed on the print area

2011-12-15 19:40:32 +01:00