bubnikv 22ca927f12 Reworked the bridge detector to allow searching a single bridging ...

direction over multiple regions. This allows a single bridge to be
drawn over holes, which are too close to each other to allow
for separate bridges.
Fixes Bridging-Angle not optimal
https://github.com/prusa3d/Slic3r/issues/12

Re-allowed adaptive infill line width for solid infills. The adaptive
infill line width works in some circumstances, see Issue #15,
but the original implementation often changed the line width too
aggressively. The current implementation limits the line width change
to 20%.
Fixes Gaps between infill and perimeter leads to errors in laydown on following layer
https://github.com/prusa3d/Slic3r/issues/15

2016-11-08 09:59:25 +01:00

..

angles.t

Bugfix: medial axis missed some segments. #2144

2014-08-03 15:03:47 +02:00

arcs.t

Avoid integer overflow in arc test. Fixes #1918

2014-04-22 23:01:01 -04:00

avoid_crossing_perimeters.t

Fixed regression causing crash when using avoid_crossing_perimeters with multiple object, caused by recent refactorings. Added regression test

2014-11-26 22:46:51 +01:00

bridges.t

Reworked the bridge detector to allow searching a single bridging

2016-11-08 09:59:25 +01:00

clean_polylines.t

Removed more unused functions and fixed tests

2013-11-22 16:19:15 +01:00

clipper.t

Fix more regressions in test suite regarding the workaround for Clipper bug

2014-05-21 15:45:16 +02:00

collinear.t

Removed dependency on Math::Clipper

2013-08-27 01:26:44 +02:00

combineinfill.t

Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled

2015-03-06 09:56:58 +01:00

config.t

Removed setenv() test as we can't test environment variables in Perl since they are now set in XS

2015-07-01 20:15:52 +02:00

cooling.t

Defined the +-* operators on Pointf.

2016-10-21 16:53:42 +02:00

custom_gcode.t

Finished porting PlaceholderParser to XS

2015-07-01 19:35:22 +02:00

dynamic.t

Port offset_ex() and offset2_ex() to XS

2013-07-16 20:09:53 +02:00

fill.t

Test of a 100% coverage by the FillRectilinear2 has been disabled before,

2016-11-02 17:15:05 +01:00

flow.t

Make tests happy

2015-01-14 00:14:56 +01:00

gaps.t

Bugfix: gap fill was not inserted in the correct order before leaving island. Includes regression test. #1907

2014-04-29 15:25:14 +02:00

gcode.t

Ported Slic3r::GCode storage to XS

2015-07-01 21:47:17 +02:00

geometry.t

Bugfix: concave starting points were not correctly detected for slice holes. Includes regression test. #2857

2015-06-01 17:55:51 +02:00

layers.t

Failing test for broken command line scaling. #1889

2014-04-05 11:21:26 +02:00

loops.t

Fix threads, tests and require the most recent Moo version

2013-09-12 11:09:03 +02:00

multi.t

Fixed test and implementation of ooze prevention standby points (wrong test caused wrong implementation). #2103

2015-01-19 15:31:12 +01:00

perimeters.t

Fix of a test case of PerimeterGenerator.

2016-09-28 11:17:59 +02:00

polyclip.t

Removed more unused functions and fixed tests

2013-11-22 16:19:15 +01:00

pressure.t

Make tests happy with new defaults

2015-01-31 12:10:50 +01:00

print.t

Removed print_center option (but left --print-center from CLI)

2014-06-16 23:58:45 +02:00

retraction.t

Test case for Bugfix: use Lift-z option for 2. extruder #3385

2016-09-26 12:50:05 +02:00

shells.t

Ported more Slic3r::GCode methods to XS

2015-07-01 23:00:52 +02:00

skirt_brim.t

Bugfix: don't crash when skirts > 0 but skirt_height = 0. Includes regression test. #2537

2015-01-18 13:01:00 +01:00

slice.t

Fix threads, tests and require the most recent Moo version

2013-09-12 11:09:03 +02:00

support.t

Use thick raft layers as we do for support material layers. #2723

2015-03-09 20:00:55 +01:00

svg.t

Bugfix: failure when exporting SVG from object containing multiple islands. Includes regression test. #2050

2014-05-26 11:13:53 +02:00

thin.t

More refactoring to medial axis and gap fill, more robust

2016-05-20 17:03:57 +02:00

threads.t

More work for removing references to $Slic3r::Config

2013-12-24 11:58:36 +01:00