mirror of
https://github.com/FULU-Foundation/OrcaSlicer-bambulab.git
synced 2026-05-14 06:53:47 -07:00
112 lines
3.7 KiB
JSON
112 lines
3.7 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Lulzbot Taz 4 or 5 0.5 nozzle",
|
|
"inherits": "fdm_machine_common",
|
|
"from": "system",
|
|
"setting_id": "LZ004",
|
|
"instantiation": "true",
|
|
"printer_model": "Lulzbot Taz 4 or 5",
|
|
"default_print_profile": "0.25mm Standard @Lulzbot Taz 4 or 5",
|
|
"nozzle_diameter": [
|
|
"0.5"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"280x0",
|
|
"280x280",
|
|
"0x280"
|
|
],
|
|
"printable_height": "250",
|
|
"nozzle_type": "undefine",
|
|
"auxiliary_fan": "0",
|
|
"emit_machine_limits_to_gcode": "0",
|
|
"machine_max_acceleration_extruding": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"1250",
|
|
"1250"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"100",
|
|
"100"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"60",
|
|
"60"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"5",
|
|
"5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.4",
|
|
"0.4"
|
|
],
|
|
"max_layer_height": [
|
|
"0.4"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"printer_settings_id": "Lulzbot4-5",
|
|
"retraction_minimum_travel": [
|
|
"2"
|
|
],
|
|
"retract_before_wipe": [
|
|
"70%"
|
|
],
|
|
"retraction_length": [
|
|
"5"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"1"
|
|
],
|
|
"deretraction_speed": [
|
|
"40"
|
|
],
|
|
"single_extruder_multi_material": "1",
|
|
"default_filament_profile": [
|
|
"Lulzbot 2.85mm PLA"
|
|
],
|
|
"machine_start_gcode": ";This G-Code has been generated specifically for the Lulzbot Taz 4 and 5 - translated from CuraLE 4.13.10 by Wrathernaut\nM73 P0; clear GLCD progress bar\nM75; start GLCD timer\nM140 S{bed_temperature_initial_layer[0]}; start bed heating up\nG90; absolute positioning\nM107; disable fans\nM82; set extruder to absolute mode\nG28 X0 Y0; home X and Y\nG28 Z0; home Z\nG1 Z15.0 F175; move extruder up\nM117 Heating...; progress indicator message on LCD\nM109 R{nozzle_temperature_initial_layer[0]}; wait for extruder to reach printing temp\nM190 R{bed_temperature_initial_layer[0]}; wait for bed to reach printing temp\nG92 E0; set extruder position to 0\nG1 F200 E0; prime the nozzle with filament\nG92 E0; re-set extruder position to 0\nG1 F175; set travel speed\nM203 X192 Y208 Z3; set limits on travel speed\nM117 TAZ Printing...; progress indicator message on LCD\n;Start G-Code End",
|
|
"machine_end_gcode": ";End G-Code Begin\nM400; wait for moves to finish\nM140 S0; disable hotend\nM104 S0; disable bed heater\nM107; disable fans\nG91; relative positioning\nG1 E-1 F300; filament retraction to release pressure\nG1 Z0.5 E-5 X-20 Y-20 F3000; lift up and retract even more filament\nM77;stopGLCD timer\nG90;absolute positioning\nG1 X0 Y250;move to cooling position\nM84;disable steppers\nM117 Print Complete.;print complete message",
|
|
"before_layer_change_gcode": "G92 E0; reset relative extrusion",
|
|
"layer_change_gcode": "; LAYER:{layer_num}\nM117 Layer: {layer_num +1} / [total_layer_count]",
|
|
"change_filament_gcode": "M400\nM600 B10 X115 Y-10 Z10\nM190 S{bed_temperature[0]}\nM109 S{temperature[0]}",
|
|
"machine_pause_gcode": "M600 B10",
|
|
"scan_first_layer": "0"
|
|
} |