mirror of
https://github.com/FULU-Foundation/OrcaSlicer-bambulab.git
synced 2026-05-14 06:53:47 -07:00
170 lines
3.2 KiB
JSON
170 lines
3.2 KiB
JSON
{
|
|
"type": "process",
|
|
"name": "0.08mm High Quality @BBL P1P 0.2 nozzle",
|
|
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
|
"from": "system",
|
|
"setting_id": "GP121",
|
|
"instantiation": "true",
|
|
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
|
"bridge_speed": [
|
|
"50",
|
|
"50"
|
|
],
|
|
"default_acceleration": [
|
|
"4000",
|
|
"4000"
|
|
],
|
|
"elefant_foot_compensation": "0.15",
|
|
"enable_overhang_speed": [
|
|
"1",
|
|
"1"
|
|
],
|
|
"enable_height_slowdown": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"gap_infill_speed": [
|
|
"50",
|
|
"50"
|
|
],
|
|
"initial_layer_infill_speed": [
|
|
"70",
|
|
"70"
|
|
],
|
|
"initial_layer_speed": [
|
|
"40",
|
|
"40"
|
|
],
|
|
"initial_layer_acceleration": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"inner_wall_acceleration": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"inner_wall_speed": [
|
|
"150",
|
|
"150"
|
|
],
|
|
"internal_solid_infill_speed": [
|
|
"150",
|
|
"150"
|
|
],
|
|
"initial_layer_travel_acceleration": [
|
|
"6000",
|
|
"6000"
|
|
],
|
|
"outer_wall_acceleration": [
|
|
"2000",
|
|
"2000"
|
|
],
|
|
"outer_wall_speed": [
|
|
"60",
|
|
"60"
|
|
],
|
|
"overhang_1_4_speed": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"overhang_2_4_speed": [
|
|
"50",
|
|
"50"
|
|
],
|
|
"overhang_3_4_speed": [
|
|
"30",
|
|
"30"
|
|
],
|
|
"overhang_4_4_speed": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"overhang_totally_speed": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"print_extruder_id": [
|
|
"1",
|
|
"1"
|
|
],
|
|
"print_extruder_variant": [
|
|
"Direct Drive Standard",
|
|
"Direct Drive High Flow"
|
|
],
|
|
"sparse_infill_pattern": "gyroid",
|
|
"sparse_infill_speed": [
|
|
"100",
|
|
"100"
|
|
],
|
|
"slowdown_start_height": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"slowdown_start_speed": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"slowdown_start_acc": [
|
|
"100000",
|
|
"100000"
|
|
],
|
|
"slowdown_end_height": [
|
|
"400",
|
|
"400"
|
|
],
|
|
"slowdown_end_speed": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"slowdown_end_acc": [
|
|
"100000",
|
|
"100000"
|
|
],
|
|
"small_perimeter_speed": [
|
|
"50%",
|
|
"50%"
|
|
],
|
|
"small_perimeter_threshold": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"sparse_infill_acceleration": [
|
|
"100%",
|
|
"100%"
|
|
],
|
|
"support_speed": [
|
|
"150",
|
|
"150"
|
|
],
|
|
"support_interface_speed": [
|
|
"80",
|
|
"80"
|
|
],
|
|
"top_surface_speed": [
|
|
"150",
|
|
"150"
|
|
],
|
|
"top_surface_acceleration": [
|
|
"2000",
|
|
"2000"
|
|
],
|
|
"travel_speed": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"travel_speed_z": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"travel_acceleration": [
|
|
"10000",
|
|
"10000"
|
|
],
|
|
"vertical_shell_speed": [
|
|
"80%",
|
|
"80%"
|
|
],
|
|
"compatible_printers": [
|
|
"Bambu Lab P1P 0.2 nozzle"
|
|
]
|
|
} |