OrcaSlicer-bambulab/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro Dual 0.5 nozzle.json

{
    "type": "machine",
    "name": "Lulzbot Taz Pro Dual 0.5 nozzle",
    "inherits": "Lulzbot Taz Pro Common",
    "from": "system",
    "setting_id": "LZPD001",
    "instantiation": "true",
    "single_extruder_multi_material": "0",
    "extruders_count": "2",
    "printer_model": "Lulzbot Taz Pro Dual",
    "default_print_profile": "0.25mm Standard @Lulzbot Taz Pro Dual",
    "nozzle_diameter": [
        "0.5",
        "0.5"
    ],
    "printer_settings_id": "LulzbotPro-Dual",
    "default_filament_profile": [
        "Lulzbot 2.85mm PLA"
    ],
    "machine_start_gcode": ";This G-Code has been translated from Cura startup from CuraLE 4.13.10 to OrcaSlicer by Wrathernaut\nT0\nM82; absolute extrusion mode\nM73 P0; clear GLCD progress bar\nM75; start GLCD timer\nM107; disable fans\nG90; absolute positioning\nM420 S0; disable previous leveling matrix\nM140 S{bed_temperature_initial_layer[initial_tool]}; begin bed temping up (w)\nM104 {if filament_type[initial_tool] == \"PLA\"}S180\n{elsif filament_type[initial_tool] == \"ABS\"}S190\n{elsif filament_type[initial_tool] == \"ABS-GF\"}S190\n{elsif filament_type[initial_tool] == \"ASA\"}S190\n{elsif filament_type[initial_tool] == \"ASA-Aero\"}S190\n{elsif filament_type[initial_tool] == \"BVOH\"}S170\n{elsif filament_type[initial_tool] == \"EVA\"}S170\n{elsif filament_type[initial_tool] == \"PA\"}R220\n{elsif filament_type[initial_tool] == \"PA-CF\"}R220\n{elsif filament_type[initial_tool] == \"PA-GF\"}R220\n{elsif filament_type[initial_tool] == \"PA6-CF\"}R220\n{elsif filament_type[initial_tool] == \"PA11-CF\"}R220\n{elsif filament_type[initial_tool] == \"ASA-Aero\"}S170\n{elsif filament_type[initial_tool] == \"PC\"}R220\n{elsif filament_type[initial_tool] == \"PC-CF\"}R220\n{elsif filament_type[initial_tool] == \"PCTG\"}S180\n{elsif filament_type[initial_tool] == \"PE\"}S190\n{elsif filament_type[initial_tool] == \"PE-CF\"}S190\n{elsif filament_type[initial_tool] == \"PET-CF\"}S190\n{elsif filament_type[initial_tool] == \"PETG\"}S190\n{elsif filament_type[initial_tool] == \"PETG-CF10\"}S190\n{elsif filament_type[initial_tool] == \"PHA\"}S180\n{elsif filament_type[initial_tool] == \"PLA-AERO\"}S180\n{elsif filament_type[initial_tool] == \"PLA-CF\"}S180\n{elsif filament_type[initial_tool] == \"PP\"}S180\n{elsif filament_type[initial_tool] == \"PP-CF\"}S180\n{elsif filament_type[initial_tool] == \"PP-GF\"}S180\n{elsif filament_type[initial_tool] == \"PPS\"}S180\n{elsif filament_type[initial_tool] == \"PPS-CF\"}S180\n{elsif filament_type[initial_tool] == \"PVA\"}S180\n{elsif filament_type[initial_tool] == \"PVB\"}S180\n{elsif filament_type[initial_tool] == \"SBS\"}S180\n{elsif filament_type[initial_tool] == \"TPU\"}S180\n{elsif filament_type[initial_tool] == \"FLEX\"}S180\n{elsif filament_type[initial_tool] == \"PET\"}S170\n{elsif filament_type[initial_tool] == \"HIPS\"}S170\n{elsif filament_type[initial_tool] == \"NYLON\"}R220\n{else}S190; unknown filament type soften temp before homing Z\n{endif}G28; home\nG0 X50 Y25 Z10 F2000\nM117 Heating...\nM109 {if filament_type[0] == \"PLA\"}R180\n{elsif filament_type[0] == \"ABS\"}R190\n{elsif filament_type[0] == \"ABS-GF\"}R190\n{elsif filament_type[0] == \"ASA\"}R190\n{elsif filament_type[0] == \"ASA-Aero\"}R190\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R220\n{elsif filament_type[0] == \"PA-CF\"}R220\n{elsif filament_type[0] == \"PA-GF\"}R220\n{elsif filament_type[0] == \"PA6-CF\"}R220\n{elsif filament_type[0] == \"PA11-CF\"}R220\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R220\n{elsif filament_type[0] == \"PC-CF\"}R220\n{elsif filament_type[0] == \"PCTG\"}R180\n{elsif filament_type[0] == \"PE\"}R190\n{elsif filament_type[0] == \"PE-CF\"}R190\n{elsif filament_type[0] == \"PET-CF\"}R190\n{elsif filament_type[0] == \"PETG\"}R190\n{elsif filament_type[0] == \"PETG-CF10\"}R190\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R180\n{elsif filament_type[0] == \"PVB\"}R180\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R180\n{elsif filament_type[0] == \"FLEX\"}R180\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R170\n{elsif filament_type[0] == \"NYLON\"}R220\n{else}R190; unknown filament type soften temp before homing Z{endif}\nM82; set extruder to absolute mode\nG92 E0; set extruder to zero\nG1 E-7 F100; retract 7mm of filament on first extruder\nM106; turn on fans to speed cooling\nM117 Wiping...\nM109 {if filament_type[0] == \"PLA\"}R180\n{elsif filament_type[0] == \"ABS\"}R190\n{elsif filament_type[0] == \"ABS-GF\"}R190\n{elsif filament_type[0] == \"ASA\"}R190\n{elsif filament_type[0] == \"ASA-Aero\"}R190\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R220\n{elsif filament_type[0] == \"PA-CF\"}R220\n{elsif filament_type[0] == \"PA-GF\"}R220\n{elsif filament_type[0] == \"PA6-CF\"}R220\n{elsif filament_type[0] == \"PA11-CF\"}R220\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R220\n{elsif filament_type[0] == \"PC-CF\"}R220\n{elsif filament_type[0] == \"PCTG\"}R190\n{elsif filament_type[0] == \"PE\"}R190\n{elsif filament_type[0] == \"PE-CF\"}R190\n{elsif filament_type[0] == \"PET-CF\"}R190\n{elsif filament_type[0] == \"PETG\"}R190\n{elsif filament_type[0] == \"PETG-CF10\"}R190\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R180\n{elsif filament_type[0] == \"PVB\"}R180\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R180\n{elsif filament_type[0] == \"FLEX\"}R180\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R180\n{elsif filament_type[0] == \"NYLON\"}R220\n{else}R170; unknown filament type wipe temp{endif}\nM109 {if filament_type[0] == \"PLA\"}R160\n{elsif filament_type[0] == \"ABS\"}R170\n{elsif filament_type[0] == \"ABS-GF\"}R170\n{elsif filament_type[0] == \"ASA\"}R170\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R200\n{elsif filament_type[0] == \"PA-CF\"}R200\n{elsif filament_type[0] == \"PA-GF\"}R170\n{elsif filament_type[0] == \"PA6-CF\"}R170\n{elsif filament_type[0] == \"PA11-CF\"}R200\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R200\n{elsif filament_type[0] == \"PC-CF\"}R200\n{elsif filament_type[0] == \"PCTG\"}R180\n{elsif filament_type[0] == \"PE\"}R180\n{elsif filament_type[0] == \"PE-CF\"}R180\n{elsif filament_type[0] == \"PET-CF\"}R170\n{elsif filament_type[0] == \"PETG\"}R170\n{elsif filament_type[0] == \"PETG-CF10\"}R170\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R160\n{elsif filament_type[0] == \"PVB\"}R160\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R160\n{elsif filament_type[0] == \"FLEX\"}R160\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R160\n{elsif filament_type[0] == \"NYLON\"}R200\n{else}R170; unknown filament type probe temp{endif}; cool to probe temp\nG12; wipe sequence\nM107; turn off fan\nG29; probe sequence (for auto-leveling)\nM420 S1; enable leveling matrix\nT{initial_tool}; ensure we're using the first extruder\nM104 S{first_layer_temperature[initial_tool]}; set extruder temp\nG0 X5 Y15 Z10 F5000; move to start location\nM400; clear buffer\nM117 Heating...\nM109 R{first_layer_temperature[initial_tool]}; set extruder temp and waitnM190 R{bed_temperature_initial_layer[initial_tool]}; get bed temping up during first layer\nG1 Z2 E0 F75; raise head and 0 extruder\nM82; set to absolute mode\nM400; clear buffer\nM300 T; play sound at start of first layer\nM117 Printing ...\n;Start G-Code End",
    "machine_end_gcode": "M400; wait for moves to finish\nM140 S0; start cooling bed\nM107; fans off\nG91 ; relative positioning\nG1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z25 E-1 X20 Y20 F2000; move Z up a bit and retract filament even more\nM104 S{nozzle_temperature[0]} T0 ; T0 to print temp\nM104 S{nozzle_temperature[1]} T1 ; T1 to print temp\nG90 ; absolute positioning\nG0 X285 Y-30 F3000; move to cooling position\nG91 ; relative positioning\nM117 Purging for next print;progress indicator message\nT0\nM109 S{nozzle_temperature[0]}; wait for temp\nG92 E0; set extruder position to purge amount\nG1 E15 F75; purge\nM400; wait for purge\nM104 S0 ; T0 hotend off\nT1\nM109 S{nozzle_temperature[1]}; wait for temp\nG92 E0; set extruder position to purge amount\nG1 E15 F75; purge\nM400; wait for purge\nM104 S0 ; T1 hotend off\nT0\nM117 Cooling, please wait;progress indicator message\nM190 S0; cool off bed\nG0 Y280 F3000 ; present finished print\nM77; stop GLCD timer\nM18 X Y E; turn off x y and e axis\nG90 ; absolute positioning\nM117 Print complete; progress indicator message"
}