{
    "type": "machine",
    "name": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
    "printer_structure": "corexy",
    "gcode_flavor": "klipper",
    "machine_start_gcode": "M104 S0 ; Stops OrcaSlicer from sending temp waits separately\nM140 S0\nPRINT_START EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]\n; Start of actual GCode for the print",
    "machine_end_gcode": "PRINT_END",
    "extruder_colour": "#02aba2",
    "extruder_offset": "0x0",
	"emit_machine_limits_to_gcode": "0",
	"default_filament_profile": "Generic PLA @E3NG v1.2S",
    "machine_min_extruding_rate": [
        "0",
        "0"
    ],
    "machine_min_travel_rate": [
        "0",
        "0"
    ],
    "max_layer_height": "0.30",
    "min_layer_height": "0.10",
    "nozzle_diameter": "0.4",
    "printer_settings_id": "",
    "printer_technology": "FFF",
    "printer_variant": "0.4",
    "retraction_minimum_travel": "1",
    "retract_when_changing_layer": "1",
    "retraction_length": "0.6",
    "retract_length_toolchange": "2",
    "z_hop": "0.0",
    "z_hop_types": "Slope Lift",
    "use_firmware_retraction": "1",
    "use_relative_e_distances": "1",
    "retract_restart_extra": "0",
    "retract_restart_extra_toolchange": "0",
    "retraction_speed": "40",
    "deretraction_speed": "60",
    "single_extruder_multi_material": "0",
    "thumbnails": [
        "16x16/QOI",
        "313x173/QOI",
        "440x240/QOI",
        "480x240/QOI",
        "32x32/PNG",
		"320x240/PNG",
		"640x480/PNG"
    ],
    "change_filament_gcode": "PAUSE\nG1 E1.0 F300 ; prime after color change",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0",
    "layer_change_gcode": ";AFTER_LAYER_CHANGE",
    "machine_pause_gcode": "PAUSE\n",
    "wipe": "1"
}