{
    "type": "filament",
    "name": "Peopoly Lancer ABS-GF",
    "inherits": "fdm_filament_abs",
    "from": "system",
    "setting_id": "GFSL99",
    "filament_id": "GFL99",
    "instantiation": "true",
    "filament_flow_ratio": [
        "0.91"
    ],
    "nozzle_temperature_initial_layer": [
        "260"
    ],
    "nozzle_temperature": [
        "270"
    ],
    "hot_plate_temp_initial_layer": [
        "90"
    ],
    "hot_plate_temp": [
        "100"
    ],
    "filament_max_volumetric_speed": [
        "35"
    ],
    "fan_max_speed": [
        "40"
    ],
    "slow_down_layer_time": [
        "6"
    ],
    "overhang_fan_speed": [
        "30"
    ],
    "reduce_fan_stop_start_freq": [
        "0"
    ],
    "filament_type": [
        "ABS"
    ],
    "enable_pressure_advance": [
        "1"
    ],
    "filament_retraction_length": [
        "0.8"
    ],
    "filament_retraction_speed": [
        "60"
    ],
    "filament_deretraction_speed": [
        "60"
    ],
    "filament_wipe": [
        "1"
    ],
    "filament_wipe_distance": [
        "1"
    ],
    "pressure_advance": [
        "0.016"
    ],
    "filament_vendor": [
        "Peopoly"
    ],
    "compatible_printers": [
        "Peopoly Magneto X 0.4 nozzle",
        "Peopoly Magneto X 0.6 nozzle",
        "Peopoly Magneto X 0.8 nozzle"
    ]
}