{
    "type": "process",
    "name": "0.24mm Standard @FF G4P HF",
    "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
    "from": "system",
    "instantiation": "true",
    "bridge_speed": "15",
    "brim_type": "auto_brim",
    "elefant_foot_compensation": "0.1",
    "enable_arc_fitting": "1",
    "enable_support": "0",
    "filter_out_gap_fill": "0.1",
    "flush_into_support": "1",
    "compatible_printers": [
        "Flashforge Guider4 Pro 0.4 HF nozzle"
    ],
    "gap_fill_target": "topbottom",
    "gap_infill_speed": "180",
    "infill_wall_overlap": "50%",
    "initial_layer_infill_speed": "80",
    "initial_layer_speed": "60",
    "inner_wall_speed": "300",
    "internal_solid_infill_speed": "230",
    "layer_height": "0.24",
    "only_one_wall_first_layer": "1",
    "prime_tower_brim_width": "5",
    "prime_tower_width": "30",
    "print_settings_id": "0.24mm Standard @FF G4P HF",
    "seam_gap": "5%",
    "skirt_loops": "0",
    "small_perimeter_speed": "10",
    "sparse_infill_pattern": "grid",
    "sparse_infill_speed": "230",
    "support_base_pattern_spacing": "2.5",
    "support_bottom_interface_spacing": "0.5",
    "support_bottom_z_distance": "0.18",
    "support_interface_filament": "0",
    "support_interface_spacing": "0.2",
    "support_interface_speed": "80",
    "support_interface_top_layers": "2",
    "support_line_width": "0.42",
    "support_speed": "150",
    "support_top_z_distance": "0.18",
    "support_type": "tree(auto)",
    "travel_acceleration": "30000",
    "travel_speed": "600",
    "wipe_tower_cone_angle": "10",
    "wipe_tower_extra_spacing": "110%"
}