{
    "type": "process",
    "name": "0.38mm Standard 0.8 nozzle @Blocks_RF50",
    "inherits": "fdm_process_common 0.8 nozzle",
    "from": "system",
    "setting_id": "GP004",
    "instantiation": "true",
    "layer_height": "0.38",
    "initial_layer_print_height": "0.4",
    "bottom_shell_layers": "4",
    "top_shell_layers": "4",
    "compatible_printers": [
        "BLOCKS RF50",
        "BLOCKS RF50 0.8 nozzle"
    ],
    "sparse_infill_speed": "300",
    "support_interface_speed": "180",
    "travel_speed": "500",
    "bridge_infill_acceleration": "50%",
    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
    "enable_arc_fitting": "0",
    "wall_generator": "classic",
    "top_solid_infill_flow_ratio": "0.97",
    "bottom_solid_infill_flow_ratio": "1.08",
    "seam_position": "aligned",
    "sparse_infill_patter": "grid",
    "initial_layer_speed": "60",
    "initial_layer_infill_speed": "80",
    "initial_travel_speed": "100%",
    "slow_layers_count": "5",
    "slow_down_layers": "5",
    "outer_wall_speed": "180",
    "inner_wall_speed": "300",
    "small_perimeter_speed": "50%",
    "small_perimeter_threshold": "0",
    "internal_solid_infill_speed": "270",
    "top_surface_speed": "200",
    "gap_infill_speed": "260",
    "support_speed": "300",
    "detect_overhang_wall": "1",
    "enable_overhang_speed": "1",
    "overhang_speed_classic": "0",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "50",
    "overhang_3_4_speed": "30",
    "overhang_4_4_speed": "10",
    "slowdown_for_curled_perimeters": "1",
    "bridge_speed": "50%",
    "internal_bridge_speed": "100%",
    "default_acceleration": "5000",
    "outer_wall_acceleration": "2500",
    "inner_wall_acceleration": "4500",
    "initial_layer_acceleration": "1500",
    "top_surface_acceleration": "2000",
    "internal_solid_infill_acceleration": "100%",
    "travel_acceleration": "20000",
    "sparse_infill_acceleration": "100%",
    "bridge_acceleration": "50%",
    "accel_to_decel_enable": "1",
    "accel_to_decel_factor": "50%",
    "elefant_foot_compensation": "0.25",
    "elefant_foot_compensation_layers": "1"
}