{
  "type": "machine",
  "name": "fdm_re3D_common",
  "from": "system",
  "instantiation": "false",
  "inherits": "fdm_machine_common",
  "gcode_flavor": "klipper",
  "machine_max_acceleration_e": ["5000", "5000"],
  "machine_max_acceleration_extruding": ["5000", "5000"],
  "machine_max_acceleration_retracting": ["5000", "5000"],
  "machine_max_acceleration_travel": ["20000", "20000"],
  "machine_max_acceleration_x": ["5000", "5000"],
  "machine_max_acceleration_y": ["5000", "5000"],
  "machine_max_acceleration_z": ["5000", "5000"],
  "machine_max_speed_e": ["20", "20"],
  "machine_max_speed_x": ["500", "500"],
  "machine_max_speed_y": ["500", "500"],
  "machine_max_speed_z": ["20", "20"],
  "machine_max_jerk_e": ["2.5", "2.5"],
  "machine_max_jerk_x": ["9", "9"],
  "machine_max_jerk_y": ["9", "9"],
  "machine_max_jerk_z": ["0.2", "0.2"],
  "machine_min_extruding_rate": ["0", "0"],
  "machine_min_travel_rate": ["0", "0"],
  "max_layer_height": ["0.32"],
  "min_layer_height": ["0.2"],
  "extruder_clearance_radius": "125",
  "extruder_clearance_height_to_rod": "25",
  "printer_settings_id": "",
  "printer_technology": "FFF",
  "printer_variant": "0.4",
  "retraction_minimum_travel": ["1"],
  "retract_before_wipe": ["70%"],
  "retract_when_changing_layer": ["1"],
  "retraction_length": ["1.0"],
  "retract_length_toolchange": ["12"],
  "z_hop": ["0"],
  "retract_restart_extra": ["0"],
  "retract_restart_extra_toolchange": ["-0.08"],
  "retraction_speed": ["200"],
  "deretraction_speed": ["200"],
  "z_hop_types": "Normal Lift",
  "silent_mode": "0",
  "single_extruder_multi_material": ["0"],
  "machine_tool_change_time": ["30"],
  "change_filament_gcode": "",
  "machine_pause_gcode": "PAUSE",
  "wipe": ["0"],
  "default_filament_profile": [""],
  "default_print_profile": "",
  "bed_exclude_area": ["0x0"],
  "machine_start_gcode": "M220 S100\nM221 S100\nG28\nG92 E0\nG1 Z0.3 F200\n",
  "machine_end_gcode": "M104 S0 T0\nM104 S0 T1\nM140 S0\n\nG28 X Y\nM18\nM107\n",
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
  "scan_first_layer": "0",
  "auxiliary_fan": "0",
  "extruders_count":["2"]
}