{
    "type": "process",
    "name": "0.24mm Standard @Wanhao-D12-300",
    "inherits": "fdm_process_common",
    "from": "system",
    "setting_id": "GP004",
    "instantiation": "true",
    "layer_height": "0.24",
    "bottom_shell_layers": "4",
    "top_shell_layers": "5",
    "default_acceleration": "1500",
    "default_jerk": "3",
    "outer_wall_jerk": "3",
    "top_surface_jerk": "3",
    "infill_jerk": "3",
    "inner_wall_jerk": "3",
    "initial_layer_jerk": "3",
    "travel_jerk": "8",
    "elefant_foot_compensation": "0.1",
    "enable_prime_tower": "1",
    "extra_perimeters_on_overhangs": "1",
    "flush_into_support": "0",
    "infill_wall_overlap": "20%",
    "initial_layer_infill_speed": "45",
    "initial_layer_speed": "35",
    "initial_layer_travel_speed": "100",
    "inner_wall_acceleration": "1000",
    "internal_bridge_speed": "100",
    "internal_solid_infill_line_width": "0.42",
    "internal_solid_infill_speed": "90",
    "is_infill_first": "0",
    "line_width": "0.42",
    "outer_wall_acceleration": "1000",
    "outer_wall_line_width": "0.42",
    "outer_wall_speed": "30",
    "inner_wall_speed": "60",
    "skirt_loops": "0",
    "skirt_speed": "0",
    "slow_down_layers": "1",
    "sparse_infill_density": "10%",
    "sparse_infill_pattern": "grid",
    "sparse_infill_speed": "120",
    "staggered_inner_seams": "1",
    "support_line_width": "0.42",
    "top_shell_thickness": "1",
    "top_surface_acceleration": "1000",
    "top_surface_line_width": "0.42",
    "top_surface_speed": "40",
    "travel_acceleration": "500",
    "wall_generator": "classic",
    "wall_loops": "2",
    "wipe_before_external_loop": "1",
    "wipe_on_loops": "1",
    "compatible_printers": [
        "D12 300 PRO SMARTPAD MONO DUAL 0.4 nozzle",
        "D12 300 PRO M2 MONO DUAL 0.4 nozzle",
        "D12 300 PRO M2 DIRECT 0.4 nozzle",
        "D12 300 PRO SMARTPAD DIRECT 0.4 nozzle"
    ]
}