{
    "type": "machine",
    "name": "D12 300 PRO M2 MONO DUAL 0.4 nozzle",
    "inherits": "fdm_machine_common",
    "from": "system",
    "setting_id": "GM001",
    "instantiation": "true",
    "printer_model": "D12 300 PRO M2 MONO DUAL",
    "gcode_flavor": "marlin2",
    "default_print_profile": "0.20mm Standard @Wanhao-D12-300",
    "nozzle_diameter": [
        "0.4"
    ],
    "printable_area": [
        "0x0",
        "300x0",
        "300x300",
        "0x300"
    ],
    "printable_height": "400",
    "nozzle_type": "brass",
    "auxiliary_fan": "0",
    "printer_variant": "0.4",
    "default_filament_profile": [
        "YUMI PLA Bowden"
    ],
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
    "z_hop": [
        "0.4"
    ],
    "extra_loading_move": "-2",
    "extruder_clearance_height_to_lid": "140",
    "extruder_clearance_height_to_rod": "36",
    "extruder_clearance_radius": "65",
    "nozzle_height": "4",
    "thumbnails": "48x48/PNG, 300x300/PNG",
    "wipe_distance": [
        "2"
    ],
    "z_hop_types": [
        "Auto Lift"
    ],
    "deretraction_speed": [
        "25"
    ],
    "enable_filament_ramming": "0",
    "machine_max_acceleration_e": [
        "6000"
    ],
    "machine_max_acceleration_extruding": [
        "10000"
    ],
    "machine_max_acceleration_retracting": [
        "5000"
    ],
    "machine_max_acceleration_travel": [
        "5000",
        "500"
    ],
    "machine_max_acceleration_x": [
        "1200"
    ],
    "machine_max_acceleration_y": [
        "1000"
    ],
    "machine_max_acceleration_z": [
        "500"
    ],
    "machine_max_speed_e": [
        "50"
    ],
    "machine_max_speed_x": [
        "200"
    ],
    "machine_max_speed_y": [
        "200"
    ],
    "machine_max_speed_z": [
        "15"
    ],
    "machine_max_jerk_e": [
        "2.5"
    ],
    "machine_max_jerk_x": [
        "14"
    ],
    "machine_max_jerk_y": [
        "14"
    ],
    "machine_max_jerk_z": [
        "0.2"
    ],
    "max_layer_height": [
        "0.32"
    ],
    "min_layer_height": [
        "0.08"
    ],
    "retract_before_wipe": [
        "0%"
    ],
    "retraction_length": [
        "5"
    ],
    "retraction_minimum_travel": [
        "2"
    ],
    "retraction_speed": [
        "25"
    ],
    "retract_length_toolchange": [
        "70"
    ],
    "retract_when_changing_layer": [
        "0"
    ],
    "machine_end_gcode": "; Wanhao D12-230 Default End Gcode\nG91                     ; Mode déplacement relatif\nG1 E-2 F300             ; Retrait léger du filament pour éviter le suintement\nG1 Z10 F1200             ; Monte la tête de 10 mm\nG90                     ; Retour en position absolue\nG1 X0 Y200 F3000         ; Déplace la tête vers l'arrière pour dégager la pièce\nM104 S0                  ; Éteint la chauffe de la buse\nM140 S0                  ; Éteint la chauffe du plateau\nM107                     ; Arrête tous les ventilateurs\nM106 S0 P3               ; Arrête le ventilateur de la carte mère\nM106 S0 P2               ; Arrête le ventilateur auxiliaire\nM84 X Y E                ; Désactive les moteurs des axes X, Y et de l'extrudeur\nSET_VELOCITY_LIMIT ACCEL=2000 ACCEL_TO_DECEL=1000",
    "machine_pause_gcode": "M600",
    "machine_start_gcode": "G31\nsave_last_file\nSAVE_VARIABLE VARIABLE=was_interrupted VALUE=True\nG21                                ; set metrics values\nM104 S[nozzle_temperature_initial_layer]               ; set extruder temperature\nM140 S[bed_temperature_initial_layer_single]           ; set bed temperature\nG91                                ; set relative positioning mode\nG28                                ; home\nG90                                ; set absolute positioning mode\nG1 X0 Y0 F3000                      ; park head\nM117                                ; Purge extrudeur\nG92 E0                             ; Reset extrudeur\nM109 S[nozzle_temperature_initial_layer]                         ; set and wait extruder temperature\nM190 S[bed_temperature_initial_layer_single]            ; set and wait bed temperature\nBED_MESH_CALIBRATE ADAPTIVE=1 ADAPTIVE_MARGIN=5 ; adaptive bed leveling\n\nG1 Z1.0 F3000                      ; Prépare la buse à une petite hauteur\nM83                                ; Positionnement relatif pour l'extrudeur\n\n; Purge longue à l'avant du plateau (Y=0), centrée\nG1 X{print_bed_max[0] / 2 - 20} Y0 Z0.3 F5000     ; Début ligne 1\nG1 X{print_bed_max[0] / 2 + 20} Y0 Z0.3 F750 E24  ; Ligne 1 (2x plus longue)\nG1 X{print_bed_max[0] / 2 - 20} Y1 Z0.3 F5000     ; Légère montée et retour\nG1 X{print_bed_max[0] / 2 + 20} Y1 Z0.3 F750 E24  ; Ligne 2\n\nG1 E-5 F1800                                     ; Rétraction\nM82                                              ; Positionnement absolu pour l'extrudeur\nG92 E0                                           ; Reset extrusion\nG1 Z1.0 F3000                                    ; Légère montée"
}