{
  "type": "machine",
  "name": "fdm_machine_common",
  "from": "system",
  "instantiation": "false",
  "printer_technology": "FFF",
  "gcode_flavor": "marlin",
  "silent_mode": "0",
  "machine_max_acceleration_e": ["5000"],
  "machine_max_acceleration_extruding": ["7000"],
  "machine_max_acceleration_retracting": ["7000"],
  "machine_max_acceleration_travel": ["7000"],
  "machine_max_acceleration_x": ["7000"],
  "machine_max_acceleration_y": ["7000"],
  "machine_max_acceleration_z": ["300"],
  "machine_max_speed_e": ["60"],
  "machine_max_speed_x": ["500"],
  "machine_max_speed_y": ["500"],
  "machine_max_speed_z": ["20"],
  "machine_min_extruding_rate": ["0"],
  "machine_min_travel_rate": ["0"],
  "max_layer_height": ["0.32"],
  "min_layer_height": ["0.08"],
  "printable_height": "250",
  "extruder_clearance_radius": "50",
  "extruder_clearance_height_to_rod": "30",
  "nozzle_diameter": ["0.4"],
  "printer_settings_id": "",
  "printer_variant": "0.4",
  "retraction_minimum_travel": ["2"],
  "retract_before_wipe": ["70%"],
  "retract_when_changing_layer": ["1"],
  "retraction_length": ["1"],
  "retract_length_toolchange": ["1"],
  "z_hop": ["0"],
  "retract_restart_extra": ["0"],
  "retract_restart_extra_toolchange": ["0"],
  "retraction_speed": ["35"],
  "deretraction_speed": ["35"],
  "single_extruder_multi_material": "1",
  "wipe": ["1"],
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n\n;[layer_z]\n\nTIMELAPSE_TAKE_FRAME\n\nG92 E0.0",
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "change_filament_gcode": "M600",
  "machine_end_gcode": "PRINT_END\nM84",
  "machine_pause_gcode": "PAUSE",
  "machine_start_gcode": "START_PRINT_PREPARE BED_TEMP=[bed_temperature_initial_layer_single]\nSTART_PURGE_WIPE TRAVEL_SPEED=[travel_speed]\nSTART_PRINT_COOL_PURGE\nSTART_PRINT_FINAL_HEAT BED_TEMP=[bed_temperature_initial_layer_single] NOZZLE_TEMP=[nozzle_temperature_initial_layer] TRAVEL_SPEED=[travel_speed]\nSTART_PRIME_LINES TRAVEL_SPEED=[travel_speed]\n; filament start gcode"
}