{
    "type": "filament",
    "name": "Ginger Generic PETG",
    "inherits": "fdm_filament_common",
    "from": "system",
    "instantiation": "true",
    "filament_vendor": [
        "Generic"
    ],
    "close_fan_the_first_x_layers": [
        "4"
    ],
    "enable_overhang_bridge_fan": [
        "0"
    ],
    "enable_pressure_advance": [
        "1"
    ],
    "extruder_rotation_volume": "624",
    "fan_cooling_layer_time": [
        "100"
    ],
    "fan_max_speed": [
        "0"
    ],
    "fan_min_speed": [
        "0"
    ],
    "filament_cost": [
        "6"
    ],
    "filament_density": [
        "1.23"
    ],
    "filament_deretraction_speed": [
        "nil"
    ],
    "filament_max_volumetric_speed": [
        "200"
    ],
    "filament_retract_before_wipe": [
        "nil"
    ],
    "filament_retract_lift_above": [
        "nil"
    ],
    "filament_retract_lift_below": [
        "nil"
    ],
    "filament_retract_lift_enforce": [
        "nil"
    ],
    "filament_retract_restart_extra": [
        "nil"
    ],
    "filament_retract_when_changing_layer": [
        "nil"
    ],
    "filament_retraction_length": [
        "nil"
    ],
    "filament_retraction_minimum_travel": [
        "nil"
    ],
    "filament_retraction_speed": [
        "nil"
    ],
    "filament_settings_id": [
        "PETG"
    ],
    "filament_start_gcode": [
        "SET_PRESSURE_ADVANCE EXTRUDER=extruder SMOOTH_TIME=0.5"
    ],
    "filament_type": [
        "PETG"
    ],
    "filament_wipe": [
        "nil"
    ],
    "filament_wipe_distance": [
        "nil"
    ],
    "filament_z_hop": [
        "nil"
    ],
    "filament_z_hop_types": [
        "nil"
    ],
    "hot_plate_temp": [
        "80"
    ],
    "hot_plate_temp_initial_layer": [
        "75"
    ],
    "mixing_stepper_rotation_volume": "8000",
    "multi_zone_1_initial_layer": "240",
    "multi_zone_1_temperature": "240",
    "multi_zone_2_initial_layer": "240",
    "multi_zone_2_temperature": "240",
    "multi_zone_3_initial_layer": "220",
    "multi_zone_3_temperature": "220",
    "nozzle_temperature_range_high": [
        "260"
    ],
    "nozzle_temperature_range_low": [
        "210"
    ],
    "overhang_fan_speed": [
        "100"
    ],
    "overhang_fan_threshold": [
        "50%"
    ],
    "pressure_advance": [
        "0.3"
    ],
    "reduce_fan_stop_start_freq": [
        "0"
    ],
    "slow_down_layer_time": [
        "30"
    ],
    "slow_down_min_speed": [
        "1"
    ],
    "temperature_vitrification": [
        "75"
    ],
    "compatible_printers": [
        "Ginger G1 1.2 nozzle",
        "Ginger G1 3.0 nozzle",
        "Ginger G1 5.0 nozzle",
        "Ginger G1 8.0 nozzle"
    ]
}