{
    "type": "process",
    "name": "0.30mm Standard @Flashforge AD4 0.6 Nozzle",
    "inherits": "fdm_process_flashforge_0.30",
    "from": "system",
    "setting_id": "GP004",
    "instantiation": "true",
    "compatible_printers": [
        "Flashforge Adventurer 4 Series 0.6 Nozzle"
    ],
    "only_one_wall_top": "0",
    "infill_wall_overlap": "50%",
    "gap_infill_speed": "100",
    "initial_layer_infill_speed": "30",
    "initial_layer_speed": "10",
    "initial_layer_travel_speed": "70",
    "inner_wall_speed": "100",
    "internal_solid_infill_acceleration": "8000",
    "internal_solid_infill_speed": "100",
    "outer_wall_acceleration": "3000",
    "outer_wall_speed": "25",
    "overhang_1_4_speed": "100",
    "overhang_2_4_speed": "100",
    "overhang_3_4_speed": "80",
    "overhang_4_4_speed": "50",
    "small_perimeter_threshold": "8",
    "sparse_infill_speed": "60",
    "support_interface_speed": "50",
    "support_speed": "40",
    "support_type": "tree(auto)",
    "top_surface_acceleration": "500",
    "travel_acceleration": "8000",
    "travel_speed": "100"
}