{
    "type": "machine",
    "from": "system",
    "name": "Thinker X400 0.2 nozzle",
    "inherits": "Thinker X400 0.4 nozzle",
    "setting_id": "GM0032",
    "instantiation": "true",
    "printer_model": "Thinker X400",
    "default_print_profile": "0.10mm Standard @Thinker X400 0.2 nozzle",
    "default_filament_profile":"Eryone PLA @0.2 nozzle;Eryone ABS @0.2 nozzle;Eryone ASA @0.2 nozzle;Eryone PETG @0.2 nozzle;Eryone Silk PLA @0.2 nozzle;Eryone TPU @0.2 nozzle;Eryone ABS-CF @0.2 nozzle;Eryone ASA-CF @0.2 nozzle;Eryone PA @0.2 nozzle;Eryone PA-CF @0.2 nozzle;Eryone PA-GF @0.2 nozzle;Eryone PETG-CF @0.2 nozzle;Eryone PLA-CF @0.2 nozzle;Eryone PP @0.2 nozzle;Eryone PP-CF @0.2 nozzle;",
    "machine_start_gcode": "M117 Heating\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nPRINT_START \nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S0\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM117 Heating\nM190 S[bed_temperature_initial_layer_single]\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n;QUAD_GANTRY_LEVEL\nCLEAN_N S=[first_layer_temperature] X=240 Y=-3 A=0 D=0.4\nM117 Quad Level\n_QUAD_GANTRY_LEVEL  horizontal_move_z=10 retry_tolerance=1 LIFT_SPEED=5\nG28 Z\nM117 Quad Level\n_QUAD_GANTRY_LEVEL  horizontal_move_z=5 retry_tolerance=0.05 LIFT_SPEED=5\nM117 Bed Mesh Level\nG1 X132.5 Y197.5\nG28 N\nBED_MESH_CALIBRATE\nM117 Heating\nG1 X275.0 Y0.0 Z0.3 F1500 ; move print head up\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM117 .\nINTRO_LINE D=0.2 ;intro line with 0.2 mm nozzle",
    "max_layer_height": [
        "0.14"
    ],
    "min_layer_height": [
        "0.04"
    ],
    "nozzle_diameter": [
        "0.2"
    ],
    "retraction_length": [
        "0.5"
    ]
 
}