{
    "type": "filament",
    "name": "Fiberon PA12-CF @BBL X1C",
    "inherits": "Fiberon PA12-CF @base",
    "from": "system",
    "setting_id": "GFSL52_00",
    "instantiation": "true",
    "filament_flow_ratio": [
        "0.95",
        "0.95"
    ],
    "filament_max_volumetric_speed": [
        "14",
        "14"
    ],
    "filament_deretraction_speed": [
        "nil",
        "nil"
    ],
    "filament_flush_temp": [
        "0",
        "0"
    ],
    "filament_flush_volumetric_speed": [
        "0",
        "0"
    ],
    "filament_long_retractions_when_cut": [
        "nil",
        "nil"
    ],
    "filament_ramming_volumetric_speed": [
        "-1",
        "-1"
    ],
    "filament_retract_before_wipe": [
        "nil",
        "nil"
    ],
    "filament_retract_restart_extra": [
        "nil",
        "nil"
    ],
    "filament_retract_when_changing_layer": [
        "nil",
        "nil"
    ],
    "filament_retraction_distances_when_cut": [
        "nil",
        "nil"
    ],
    "filament_retraction_length": [
        "nil",
        "nil"
    ],
    "filament_retraction_minimum_travel": [
        "nil",
        "nil"
    ],
    "filament_retraction_speed": [
        "nil",
        "nil"
    ],
    "filament_wipe": [
        "nil",
        "nil"
    ],
    "filament_wipe_distance": [
        "nil",
        "nil"
    ],
    "filament_z_hop": [
        "nil",
        "nil"
    ],
    "filament_z_hop_types": [
        "nil",
        "nil"
    ],
    "filament_extruder_variant": [
        "Direct Drive Standard",
        "Direct Drive High Flow"
    ],
    "filament_pre_cooling_temperature": [
        "0",
        "0"
    ],
    "filament_ramming_travel_time": [
        "0",
        "0"
    ],
    "filament_adaptive_volumetric_speed": [
        "0",
        "0"
    ],
    "long_retractions_when_ec": [
        "0",
        "0"
    ],
    "nozzle_temperature": [
        "300",
        "300"
    ],
    "nozzle_temperature_initial_layer": [
        "300",
        "300"
    ],
    "retraction_distances_when_ec": [
        "0",
        "0"
    ],
    "volumetric_speed_coefficients": [
        "0 0 0 0 0 0",
        "0 0 0 0 0 0"
    ],
    "compatible_printers": [
        "Bambu Lab X1 Carbon 0.4 nozzle",
        "Bambu Lab X1 Carbon 0.6 nozzle",
        "Bambu Lab X1 Carbon 0.8 nozzle",
        "Bambu Lab P1S 0.4 nozzle",
        "Bambu Lab P1S 0.6 nozzle",
        "Bambu Lab P1S 0.8 nozzle"
    ]
}