{
    "type": "machine",
    "name": "RatRig V-Core 4 IDEX 300 0.6 nozzle",
    "inherits": "fdm_klipper_common",
    "from": "system",
    "setting_id": "GM002",
    "instantiation": "true",
    "printer_model": "RatRig V-Core 4 IDEX 300",
    "printer_variant": "0.6",
    "nozzle_diameter": [
        "0.6",
        "0.6"
    ],
    "extruder_offset": [
        "0x0",
        "0x0"
    ],
    "manual_filament_change": "0",
    "single_extruder_multi_material": "0",
    "printable_area": [
        "0x0",
        "300x0",
        "300x300",
        "0x300"
    ],
    "machine_max_speed_x": [
        "500",
        "500"
    ],
    "machine_max_speed_y": [
        "500",
        "500"
    ],
    "machine_max_speed_z": [
        "200",
        "200"
    ],
    "machine_max_speed_e": [
        "120",
        "120"
    ],
    "machine_max_acceleration_x": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_y": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_z": [
        "200",
        "200"
    ],
    "machine_max_acceleration_e": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_retracting": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_travel": [
        "20000",
        "20000"
    ],
    "machine_max_jerk_x": [
        "5",
        "5"
    ],
    "machine_max_jerk_y": [
        "5",
        "5"
    ],
    "machine_max_jerk_z": [
        "0.4",
        "0.4"
    ],
    "machine_max_jerk_e": [
        "5",
        "5"
    ],
    "min_layer_height": [
        "0.1"
    ],
    "max_layer_height": [
        "0.4"
    ],
    "extruder_clearance_radius": "45",
    "extruder_clearance_height_to_rod": "25",
    "extruder_clearance_height_to_lid": "140",
    "retract_lift_below": [
        "0.3"
    ],
    "retraction_length": [
        "0.8"
    ],
    "retraction_speed": [
        "120"
    ],
    "deretraction_speed": [
        "120"
    ],
    "wipe": [
        "1"
    ],
    "retract_before_wipe": [
        "70%"
    ],
    "z_hop": [
        "0.2"
    ],
    "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
    "change_filament_gcode": "",
    "machine_pause_gcode": "PAUSE",
    "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
    "printable_height": "300",
    "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME",
    "thumbnails": [
        "64x64/PNG",
        "100x100/PNG",
        "400x300/PNG"
    ]
}