{
    "type": "filament",
    "name": "QIDI UltraPA-CF25",
    "inherits": "fdm_filament_pa",
    "from": "system",
    "setting_id": "GFSN99",
    "filament_id": "GFN98",
    "instantiation": "true",
    "filament_type": [
        "UltraPA-CF25"
    ],
    "nozzle_temperature_initial_layer": [
        "300"
    ],
    "nozzle_temperature": [
        "300"
    ],
    "filament_max_volumetric_speed": [
        "8"
    ],
    "fan_max_speed": [
        "40"
    ],
    "fan_min_speed": [
        "20"
    ],
    "overhang_fan_threshold": [
        "0%"
    ],
    "overhang_fan_speed": [
        "40"
    ],
    "fan_cooling_layer_time": [
        "5"
    ],
    "full_fan_speed_layer": [
        "0"
    ],
    "enable_pressure_advance": [
        "1"
    ],
    "pressure_advance": [
        "0.015"
    ],
    "hot_plate_temp_initial_layer": [
        "80"
    ],
    "hot_plate_temp": [
        "80"
    ],
    "slow_down_layer_time": [
        "2"
    ],
    "filament_density": [
        "1.20"
    ],
    "temperature_vitrification": [
        "180"
    ],
    "filament_flow_ratio": [
        "0.94"
    ],
    "slow_down_min_speed": [
        "20"
    ],
    "compatible_printers": [
        "Qidi X-Plus 0.4 nozzle",
        "Qidi X-Max 0.4 nozzle",
        "Qidi X-CF Pro 0.4 nozzle",
        "Qidi X-Smart 3 0.4 nozzle",
        "Qidi X-Plus 3 0.4 nozzle",
        "Qidi X-Max 3 0.4 nozzle",
        "Qidi X-Max 0.6 nozzle",
        "Qidi X-CF Pro 0.6 nozzle",
        "Qidi X-Smart 3 0.6 nozzle",
        "Qidi X-Plus 3 0.6 nozzle",
        "Qidi X-Max 3 0.6 nozzle",
        "Qidi X-Plus 0.8 nozzle",
        "Qidi X-Max 0.8 nozzle",
        "Qidi X-CF Pro 0.8 nozzle",
        "Qidi X-Smart 3 0.8 nozzle",
        "Qidi X-Plus 3 0.8 nozzle",
        "Qidi X-Max 3 0.8 nozzle"
    ]
}