{
    "type": "filament",
    "name": "Prusament PETG @CORE One",
    "inherits": "fdm_filament_pet",
    "from": "system",
    "setting_id": "GFSA04",
    "filament_id": "Prusament PETG @CORE One",
    "instantiation": "true",
    "chamber_temperature": [
        "35"
    ],
    "close_fan_the_first_x_layers": [
        "3"
    ],
    "compatible_printers": [
        "Prusa CORE One 0.25 nozzle",
        "Prusa CORE One 0.3 nozzle",
        "Prusa CORE One 0.4 nozzle",
        "Prusa CORE One 0.5 nozzle"
    ],
    "fan_cooling_layer_time": [
        "25"
    ],
    "fan_max_speed": [
        "60"
    ],
    "fan_min_speed": [
        "30"
    ],
    "filament_cost": [
        "29.99"
    ],
    "filament_density": [
        "1.27"
    ],
    "filament_diameter": [
        "1.75"
    ],
    "filament_end_gcode": [
        "; Filament-specific end gcode"
    ],
    "filament_flow_ratio": [
        "1"
    ],
    "filament_max_volumetric_speed": [
        "12"
    ],
    "filament_minimal_purge_on_wipe_tower": [
        "35"
    ],
    "filament_notes": [
        ""
    ],
    "filament_retract_before_wipe": [
        "20"
    ],
    "filament_retraction_length": [
        "0.8"
    ],
    "filament_soluble": [
        "0"
    ],
    "filament_start_gcode": [
        "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
    ],
    "filament_type": [
        "PETG"
    ],
    "filament_vendor": [
        "Prusa Polymers"
    ],
    "filament_wipe": [
        "1"
    ],
    "filament_z_hop": [
        "1.5"
    ],
    "filament_z_hop_types": [
        "Slope Lift"
    ],
    "full_fan_speed_layer": [
        "5"
    ],
    "hot_plate_temp": [
        "85"
    ],
    "hot_plate_temp_initial_layer": [
        "85"
    ],
    "idle_temperature": [
        "130"
    ],
    "nozzle_temperature": [
        "250"
    ],
    "nozzle_temperature_initial_layer": [
        "250"
    ],
    "overhang_fan_speed": [
        "60"
    ],
    "reduce_fan_stop_start_freq": [
        "1"
    ],
    "slow_down_layer_time": [
        "9"
    ],
    "slow_down_min_speed": [
        "15"
    ]
}