{
    "type": "filament",
    "name": "Prusa Generic ABS @MK4S",
    "inherits": "fdm_filament_abs",
    "from": "system",
    "setting_id": "GFSA04",
    "filament_id": "Generic ABS @MK4S",
    "instantiation": "true",
    "close_fan_the_first_x_layers": "4",
    "compatible_printers": [
        "Prusa MK4S 0.25 nozzle",
        "Prusa MK4S 0.3 nozzle",
        "Prusa MK4S 0.4 nozzle",
        "Prusa MK4S 0.5 nozzle"
    ],
    "default_filament_colour": "#FFF2EC",
    "fan_max_speed": "10",
    "filament_cost": [
        "27.82"
    ],
    "filament_end_gcode": [
        "; Filament-specific end gcode"
    ],
    "filament_max_volumetric_speed": [
        "15"
    ],
    "filament_minimal_purge_on_wipe_tower": "35",
    "filament_notes": [
        ""
    ],
    "filament_start_gcode": [
        "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
    ],
    "filament_ramming_parameters": [
        "250 100 42.4 42.4 42.4 42.4 42.4 | 0.05 42.4 0.45 42.4 0.95 42.4 1.45 42.4 1.95 42.4 2.45 42.4 2.95 42.4 3.45 42.4 3.95 42.4 4.45 42.4 4.95 42.4"
    ],
    "hot_plate_temp": "110",
    "hot_plate_temp_initial_layer": "100",
    "overhang_fan_speed": "20",
    "reduce_fan_stop_start_freq": "0",
    "slow_down_layer_time": "20",
    "slow_down_min_speed": "15"
}