{
    "type": "process",
    "name": "0.42mm Standard @FF G4 0.6 HF nozzle",
    "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
    "from": "system",
    "instantiation": "true",
    "bottom_solid_infill_flow_ratio": "0.96",
    "bridge_acceleration": "3000",
    "bridge_flow": "0.98",
    "brim_type": "auto_brim",
    "enable_arc_fitting": "1",
    "enable_prime_tower": "1",
    "exclude_object": "1",
    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "filter_out_gap_fill": "0.1",
    "flush_into_support": "1",
    "compatible_printers": [
        "Flashforge Guider4 0.6 HF nozzle"
    ],
    "gap_fill_target": "topbottom",
    "gap_infill_speed": "70",
    "infill_wall_overlap": "20%",
    "initial_layer_acceleration": "800",
    "initial_layer_infill_speed": "60",
    "initial_layer_line_width": "0.62",
    "initial_layer_print_height": "0.3",
    "initial_layer_speed": "40",
    "inner_wall_acceleration": "10000",
    "inner_wall_line_width": "0.62",
    "internal_bridge_flow": "0.98",
    "internal_bridge_speed": "35",
    "internal_solid_infill_acceleration": "10000",
    "internal_solid_infill_line_width": "0.62",
    "internal_solid_infill_speed": "150",
    "layer_height": "0.42",
    "line_width": "0.62",
    "outer_wall_acceleration": "5000",
    "outer_wall_line_width": "0.62",
    "overhang_2_4_speed": "50",
    "overhang_3_4_speed": "30",
    "overhang_4_4_speed": "12",
    "prime_tower_brim_width": "6",
    "prime_volume": "80",
    "print_settings_id": "0.42mm Standard @FF G4 0.6 HF nozzle",
    "reduce_infill_retraction": "0",
    "role_based_wipe_speed": "0",
    "seam_gap": "10%",
    "skirt_loops": "0",
    "slowdown_for_curled_perimeters": "0",
    "small_perimeter_speed": "35",
    "small_perimeter_threshold": "1",
    "sparse_infill_acceleration": "100%",
    "sparse_infill_line_width": "0.62",
    "sparse_infill_speed": "220",
    "support_bottom_z_distance": "0.3",
    "support_interface_bottom_layers": "2",
    "support_interface_filament": "0",
    "support_interface_speed": "80",
    "support_interface_top_layers": "3",
    "support_line_width": "0.62",
    "support_speed": "105",
    "thick_internal_bridges": "0",
    "top_shell_thickness": "0.8",
    "top_solid_infill_flow_ratio": "0.96",
    "top_surface_acceleration": "3000",
    "top_surface_line_width": "0.62",
    "travel_acceleration": "30000",
    "travel_speed": "550",
    "wipe_speed": "500",
    "wipe_tower_bridging": "10",
    "wipe_tower_cone_angle": "10",
    "wipe_tower_extra_spacing": "110%"
}