{
    "type": "filament",
    "name": "Flashforge PA @FF G4 0.6 HF nozzle",
    "inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle",
    "from": "system",
    "instantiation": "true",
    "activate_chamber_temp_control": [
        "1"
    ],
    "additional_cooling_fan_speed": [
        "0"
    ],
    "chamber_temperature": [
        "60"
    ],
    "close_fan_the_first_x_layers": [
        "2"
    ],
    "complete_print_exhaust_fan_speed": [
        "40"
    ],
    "cool_plate_temp": [
        "0"
    ],
    "cool_plate_temp_initial_layer": [
        "0"
    ],
    "during_print_exhaust_fan_speed": [
        "40"
    ],
    "eng_plate_temp": [
        "105"
    ],
    "eng_plate_temp_initial_layer": [
        "105"
    ],
    "fan_cooling_layer_time": [
        "30"
    ],
    "fan_max_speed": [
        "80"
    ],
    "fan_min_speed": [
        "50"
    ],
    "filament_density": [
        "1.04"
    ],
    "filament_flow_ratio": [
        "0.96"
    ],
    "filament_max_volumetric_speed": [
        "15"
    ],
    "filament_minimal_purge_on_wipe_tower": [
        "15"
    ],
    "filament_settings_id": [
        "Flashforge PA @FF G4 0.6 HF nozzle"
    ],
    "filament_start_gcode": [
        "; filament start gcode\n; right_extruder_material:PA\n\n\n"
    ],
    "filament_type": [
        "PA"
    ],
    "compatible_printers": [
        "Flashforge Guider4 0.6 HF nozzle"
    ],
    "hot_plate_temp": [
        "105"
    ],
    "hot_plate_temp_initial_layer": [
        "105"
    ],
    "nozzle_temperature": [
        "290"
    ],
    "nozzle_temperature_initial_layer": [
        "290"
    ],
    "nozzle_temperature_range_high": [
        "295"
    ],
    "nozzle_temperature_range_low": [
        "240"
    ],
    "overhang_fan_speed": [
        "80"
    ],
    "overhang_fan_threshold": [
        "25%"
    ],
    "pressure_advance": [
        "0.023"
    ],
    "slow_down_layer_time": [
        "8"
    ],
    "support_material_interface_fan_speed": [
        "80"
    ],
    "temperature_vitrification": [
        "108"
    ],
    "textured_cool_plate_temp": [
        "0"
    ],
    "textured_cool_plate_temp_initial_layer": [
        "0"
    ],
    "textured_plate_temp": [
        "105"
    ],
    "textured_plate_temp_initial_layer": [
        "105"
    ]
}