{
    "type": "machine",
    "name": "iQ TiQ2 0.25 Nozzle",
    "inherits": "fdm_tiq_common",
    "from": "system",
    "instantiation": "true",
    "printer_settings_id": "iQ TiQ2 0.25 Nozzle",    
    "printer_model": "TiQ2",
    "printer_variant": "0.25",
    "printer_notes": "Machine file version 1.0 20251106",
    "change_filament_gcode": "G1 Z{layer_z+2} F900 ; safe distance while tool change\nG1 X32 Y3 F3000\nM109 S{nozzle_temperature[next_extruder]} T[next_extruder] ; set new tool temperature so it can start heating while changing\n",
    "deretraction_speed": [
        "30",
        "30"
    ],
    "disable_m73": "1",
    "emit_machine_limits_to_gcode": "0",
    "enable_filament_ramming": "0",
    "extruder_colour": [
        "#FCE94F",
        "#FCE94F"
    ],
    "extruder_offset": [
        "0x0",
        "0x0"
    ],
    "gcode_flavor": "marlin",
    "host_type": "simplyprint",
    "long_retractions_when_cut": [
        "0",
        "0"
    ],
    "machine_end_gcode": "G1 X-19 F3000 ; home X axis\nG1 Y1 F3000 ; home Y axis\nM104 S0 T0 ; turn off extruder\nM104 S0 T1 ; turn off extruder\nM104 S0 T2 ; turn off extruder\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM806 S0 ; turn of housing fan\nM84 ; disable motor\n",
    "machine_max_speed_z": [
        "15",
        "12"
    ],
    "machine_pause_gcode": "M10710 S0",
    "machine_start_gcode": "T[initial_extruder]\nM109 S{nozzle_temperature_initial_layer[current_extruder]}\nG1 Z15 F900\nG1 X-19 Y1 F9000\nG1 X-19 Y45 F9000\nG1 Y1 F9000\nG1 Y45 F9000\nG1 Y1 F9000\nG1 Y45 F9000\nG1 X0",
    "max_layer_height": [
        "0.2",
        "0.2"
    ],
    "min_layer_height": [
        "0.08",
        "0.08"
    ],
    "nozzle_diameter": [
        "0.25",
        "0.25"
    ],
    "print_host": "https://simplyprint.io/panel",
    "printable_area": [
        "0x0",
        "330x0",
        "330x330",
        "0x330"
    ],
    "printable_height":"300",
    "retract_before_wipe": [
        "70%",
        "70%"
    ],
    "retract_length_toolchange": [
        "10",
        "12"
    ],
    "retract_lift_above": [
        "0",
        "0"
    ],
    "retract_lift_below": [
        "0",
        "0"
    ],
    "retract_lift_enforce": [
        "All Surfaces",
        "All Surfaces"
    ],
    "retract_on_top_layer": [
        "1",
        "1"
    ],
    "retract_restart_extra": [
        "0",
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "-0.2",
        "-0.2"
    ],
    "retract_when_changing_layer": [
        "1",
        "1"
    ],
    "retraction_distances_when_cut": [
        "18",
        "18"
    ],
    "retraction_length": [
        "0.8",
        "0.9"
    ],
    "retraction_minimum_travel": [
        "1",
        "1"
    ],
    "retraction_speed": [
        "30",
        "30"
    ],
    "thumbnails": "",
    "travel_slope": [
        "3",
        "3"
    ],
    "wipe": [
        "1",
        "1"
    ],
    "wipe_distance": [
        "1",
        "1"
    ],
    "z_hop": [
        "0.25",
        "0.25"
    ],
    "z_hop_types": [
        "Normal Lift",
        "Normal Lift"
    ]
}