{
    "type": "machine",
    "name": "Z-Bolt S800 Dual 0.4 nozzle",
    "inherits": "fdm_zbolt_common",
    "from": "system",
    "setting_id": "GM027",
    "instantiation": "true",
    "printer_settings_id": "Z-Bolt",
    "printer_structure": "corexy",
    "manual_filament_change": "0",
    "single_extruder_multi_material": "0",
    "printer_model": "Z-Bolt S800 Dual",
    "nozzle_diameter": [
        "0.4",
        "0.4"
    ],
    "printer_variant": "0.4",
    "printable_height": "802",
    "printable_area": [
        "0x0",
        "802x0",
        "802x802",
        "0x802"
    ],
    "default_filament_profile": [
        "Z-Bolt Generic PLA"
    ],
    "default_print_profile": "0.20mm Standard @Z-Bolt S800",
    "extruder_colour": [
        "#018001"
    ],
    "machine_max_acceleration_e": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_retracting": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_travel": [
        "9000",
        "9000"
    ],
    "machine_max_acceleration_x": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_y": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_z": [
        "500",
        "200"
    ],
    "machine_max_speed_e": [
        "30",
        "30"
    ],
    "machine_max_speed_x": [
        "500",
        "200"
    ],
    "machine_max_speed_y": [
        "500",
        "200"
    ],
    "machine_max_speed_z": [
        "20",
        "20"
    ],
    "machine_max_jerk_e": [
        "2.5",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "9",
        "9"
    ],
    "machine_max_jerk_y": [
        "9",
        "9"
    ],
    "machine_max_jerk_z": [
        "3",
        "3"
    ],
    "machine_min_extruding_rate": [
        "0",
        "0"
    ],
    "machine_min_travel_rate": [
        "0",
        "0"
    ],
    "max_layer_height": [
        "0.28"
    ],
    "min_layer_height": [
        "0.08"
    ],
    "extruder_clearance_radius": "65",
    "extruder_clearance_height_to_rod": "70",
    "extruder_clearance_height_to_lid": "200",
    "retraction_minimum_travel": [
        "1"
    ],
    "retract_before_wipe": [
        "0%"
    ],
    "retraction_length": [
        "1.4"
    ],
    "retract_length_toolchange": [
        "2"
    ],
    "z_hop": [
        "1"
    ],
    "retraction_speed": [
        "35"
    ],
    "deretraction_speed": [
        "35"
    ],
    "nozzle_type": "hardened_steel",
    "support_chamber_temp_control": "1",
    "change_filament_gcode": "G91\nG1 Z{z_hop[0]} F1000\nG90",
    "machine_start_gcode": "START_PRINT TOOL_NR=[initial_tool] T_BED=[bed_temperature_initial_layer] T_EXTRUDER=[first_layer_temperature[initial_tool]] T_CHAMBER=[chamber_temperature] {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif}",
    "machine_end_gcode": "END_PRINT T_BED=[bed_temperature] T_CHAMBER=[chamber_temperature] COOLDOWN_TIME=120",
    "machine_pause_gcode": "PAUSE"
}