{
    "type": "machine",
    "name": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
    "nozzle_diameter": [
        "0.4"
    ],
    "printer_variant": "0.4",
    "support_chamber_temp_control": "0",
    "printer_technology": "FFF",
    "deretraction_speed": [
        "40"
    ],
    "enable_long_retraction_when_cut": "0",
    "extruder_colour": [
        "#FCE94F"
    ],
    "extruder_offset": [
        "0x0"
    ],
    "gcode_flavor": "klipper",
    "silent_mode": "0",
    "long_retractions_when_cut": [
        "0"
    ],
    "machine_max_acceleration_e": [
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "10000"
    ],
    "machine_max_acceleration_retracting": [
        "1000"
    ],
    "machine_max_acceleration_x": [
        "10000"
    ],
    "machine_max_acceleration_y": [
        "10000"
    ],
    "machine_max_acceleration_z": [
        "100"
    ],
    "machine_max_speed_e": [
        "60"
    ],
    "machine_max_speed_x": [
        "500"
    ],
    "machine_max_speed_y": [
        "500"
    ],
    "machine_max_speed_z": [
        "10"
    ],
    "machine_max_jerk_e": [
        "5"
    ],
    "machine_max_jerk_x": [
        "8"
    ],
    "machine_max_jerk_y": [
        "8"
    ],
    "machine_max_jerk_z": [
        "3"
    ],
    "machine_min_extruding_rate": [
        "0"
    ],
    "machine_min_travel_rate": [
        "0"
    ],
    "max_layer_height": [
        "0.28"
    ],
    "min_layer_height": [
        "0.08"
    ],
    "printable_height": "300",
    "extruder_clearance_radius": "65",
    "extruder_clearance_height_to_rod": "34",
    "extruder_clearance_height_to_lid": "140",
    "printer_settings_id": "",
    "retraction_minimum_travel": [
        "2"
    ],
    "retract_before_wipe": [
        "70%"
    ],
    "retract_when_changing_layer": [
        "1"
    ],
    "retraction_distances_when_cut": [
        "18"
    ],
    "retraction_length": [
        "1"
    ],
    "retract_length_toolchange": [
        "1"
    ],
    "z_hop": [
        "0"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0"
    ],
    "retraction_speed": [
        "60"
    ],
    "single_extruder_multi_material": "0",
    "support_air_filtration": "0",
    "wipe": [
        "1"
    ],
    "default_filament_profile": [],
    "default_print_profile": "",
    "upward_compatible_machine": [],
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
    "machine_start_gcode": "START_PRINT EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] CHAMBER=[chamber_temperature] INITIAL_TOOL=[initial_tool]  MESH_MIN_X={adaptive_bed_mesh_min[0]}  MESH_MIN_Y={adaptive_bed_mesh_min[1]} MESH_MAX_X={adaptive_bed_mesh_max[0]} MESH_MAX_Y={adaptive_bed_mesh_max[1]} PROBE_COUNT_X={bed_mesh_probe_count[0]} PROBE_COUNT_Y={bed_mesh_probe_count[1]}\n",
    "machine_end_gcode": ";PRINT_END"
}