{
    "type": "process",
    "name": "0.1mm Extra Fine @WEMAKE3D TinyBotV1 0.4mm nozzle",
    "inherits": "fdm_process_tinyBotV1_common",
    "from": "system",
    "instantiation": "true",
    "bottom_shell_layers": "4",
    "counterbore_hole_bridging": "partiallybridge",
    "default_acceleration": "3000",
    "gap_infill_speed": "200",
    "layer_height": "0.1",
    "initial_layer_acceleration": "1000",
    "initial_layer_infill_speed": "80",
    "initial_layer_line_width": "0.48",
    "initial_layer_speed": "80",
    "inner_wall_acceleration": "2500",
    "inner_wall_speed": "200",
    "internal_solid_infill_line_width": "0.42",
    "internal_solid_infill_speed": "200",
    "line_width": "0.42",
    "outer_wall_acceleration": "2000",
    "outer_wall_line_width": "0.42",
    "outer_wall_speed": "150",
    "print_settings_id": "0.1mm Extra Fine @WEMAKE3D TinyBotV1 0.4mm nozzle",
    "slow_down_layers": "2",
    "sparse_infill_pattern": "rectilinear",
    "sparse_infill_speed": "200",
    "support_line_width": "0.42",
    "thick_bridges": "1",
    "top_shell_layers": "4",
    "top_surface_acceleration": "2000",
    "top_surface_line_width": "0.42",
    "top_surface_speed": "150",
    "travel_acceleration": "3000",
    "travel_speed": "250",
    "wall_sequence": "inner-outer-inner wall",
    "compatible_printers": [
        "WEMAKE3D TinyBotV1 0.4mm nozzle"
    ]
}