{
	"type": "machine",
	"setting_id": "GM001",
	"name": "EXO42 (0.4 nozzle)",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_volumic_common",
	"printer_model": "EXO42",
	"default_print_profile": "Normal speed - 0.15mm",
	"host_type": "esp3d",
	"print_host": "192.168.0.60",
	"nozzle_diameter": ["0.4"],
	"printable_area": ["0x0","420x0","420x420","0x420"],
	"printable_height": "420",
	"nozzle_type": "undefine",
	"auxiliary_fan": "0",
	"gcode_flavor": "marlin",
	"max_layer_height": ["0.3"],
	"min_layer_height": ["0.025"],
	"printer_variant": "0.4",
	"retraction_minimum_travel": ["1"],
	"retraction_length": ["2.4"],
	"retraction_speed": ["30"],
	"deretraction_speed": ["30"],
	"machine_max_acceleration_x": ["2000"],
	"machine_max_acceleration_y": ["2000"],
	"machine_max_acceleration_z": ["50"],
	"machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y419 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression",
	"before_layer_change_gcode": "G92 E0",
	"machine_end_gcode": "G90\nG0 X1 Y419 F5000\nG0 X1 Y419 F5000\nM107\nG91\nT0\nG1 E-1\nM104 T0 S0\nG92 E0\nM140 S0\nM84\nM300"
}