{
    "type": "process",
    "name": "0.20mm Fast @E3NG v1.2S",
    "inherits": "process_common_E3NG v1.2S",
    "from": "system",
    "setting_id": "NG3020",
    "instantiation": "true",
    "layer_height": "0.2",
    "initial_layer_print_height": "0.2",
    "compatible_printers": [
        "E3NG v1.2S - 0.4 nozzle",
        "E3NG v1.2S - 0.5 nozzle",
        "E3NG v1.2S - 0.6 nozzle"
    ],
    "reduce_crossing_wall": "0",
    "bridge_speed": "75",
    "default_acceleration": "10000",
    "initial_layer_acceleration": "7500",
    "top_surface_acceleration": "7500",
    "travel_acceleration": "10000",
    "inner_wall_acceleration": "10000",
    "outer_wall_acceleration": "7500",
	"bridge_acceleration": "5000",
	"sparse_infill_acceleration": "12500",
	"internal_solid_infill_acceleration": "10000",
    "infill_combination": "1",
    "ironing_speed": "150",
    "overhang_1_4_speed": "100",
    "overhang_2_4_speed": "50",
    "overhang_3_4_speed": "30",
    "overhang_4_4_speed": "15",
    "support_interface_speed": "120",
    "top_surface_line_width": "100%",
    "sparse_infill_line_width": "125%",
    "internal_solid_infill_line_width": "125%",
    "seam_position": "nearest",
    "initial_layer_speed": "100",
    "initial_layer_infill_speed": "150",
    "outer_wall_speed": "300",
    "inner_wall_speed": "340",
    "small_perimeter_speed": "300",
    "sparse_infill_speed": "400",
    "internal_solid_infill_speed": "340",
    "top_surface_speed": "300",
    "gap_infill_speed": "300",
    "travel_speed": "400",
    "only_one_wall_top": "0",
    "only_one_wall_first_layer": "0"
}