{
    "type": "filament",
    "name": "COEX PETG @base",
    "inherits": "fdm_filament_pet",
    "from": "system",
    "filament_id": "CXPETB13",
    "instantiation": "false",
    "filament_vendor": [
        "COEX 3D"
    ],
    "filament_cost": [
        "33.00"
    ],
    "filament_density": [
        "1.27"
    ],
    "filament_type": [
        "PETG"
    ],
    "filament_notes": "IMPORTANT: Set travel speed to maximum your machine allows (200-500mm/s) to reduce stringing",
    "nozzle_temperature": [
        "245"
    ],
    "nozzle_temperature_initial_layer": [
        "250"
    ],
    "bed_temperature": [
        "80"
    ],
    "bed_temperature_initial_layer": [
        "85"
    ],
    "temperature_vitrification": [
        "70"
    ],
    "filament_max_volumetric_speed": [
        "12"
    ],
    "filament_retraction_minimum_travel": [
        "2"
    ],
    "filament_retract_before_wipe": [
        "70%"
    ],
    "filament_retract_layer_change": [
        "1"
    ],
    "filament_retract_when_changing_layer": [
        "1"
    ],
    "filament_retraction_length": [
        "4"
    ],
    "filament_retraction_speed": [
        "30"
    ],
    "filament_deretraction_speed": [
        "30"
    ],
    "filament_z_hop": [
        "0.4"
    ],
    "filament_wipe": [
        "1"
    ],
    "filament_wipe_distance": [
        "2"
    ],
    "fan_min_speed": [
        "30"
    ],
    "fan_max_speed": [
        "50"
    ],
    "disable_fan_first_layers": [
        "2"
    ],
    "full_fan_speed_layer": [
        "4"
    ],
    "slow_down_layer_time": [
        "5"
    ],
    "slow_down_min_speed": [
        "10"
    ],
    "enable_pressure_advance": [
        "1"
    ],
    "pressure_advance": [
        "0.045"
    ],
    "compatible_printers": [],
    "compatible_printers_condition": "",
    "compatible_prints": [],
    "compatible_prints_condition": ""
}