{
    "type": "filament",
    "name": "Flashforge TPU 95A @FF G4 0.6 HF nozzle",
    "inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle",
    "from": "system",
    "instantiation": "true",
    "additional_cooling_fan_speed": [
        "40"
    ],
    "close_fan_the_first_x_layers": [
        "3"
    ],
    "complete_print_exhaust_fan_speed": [
        "40"
    ],
    "cool_plate_temp": [
        "40"
    ],
    "cool_plate_temp_initial_layer": [
        "40"
    ],
    "during_print_exhaust_fan_speed": [
        "40"
    ],
    "eng_plate_temp": [
        "50"
    ],
    "eng_plate_temp_initial_layer": [
        "50"
    ],
    "fan_cooling_layer_time": [
        "100"
    ],
    "fan_min_speed": [
        "100"
    ],
    "filament_cost": [
        "40"
    ],
    "filament_density": [
        "1.22"
    ],
    "filament_flow_ratio": [
        "0.98"
    ],
    "filament_max_volumetric_speed": [
        "8"
    ],
    "filament_minimal_purge_on_wipe_tower": [
        "15"
    ],
    "filament_ramming_parameters": [
        "105 105 6.62366 6.75269 6.98925 7.5914 8.94624 10.9892 13.2903 15.2043 16.129 16.2366 16.1505 16.1075 16.0645 16.0215 16.0215 16.0215 15.957 15.8495 15.8065 15.8495| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 11.7839 1.95 15.8075 2.45 16.1936 2.95 16.1162 3.45 16.0301 3.95 16.0301 4.45 15.8151 4.95 15.9011"
    ],
    "filament_settings_id": [
        "Flashforge TPU 95A @FF G4 0.6 HF nozzle"
    ],
    "filament_start_gcode": [
        "; filament start gcode\n; right_extruder_material:TPU"
    ],
    "filament_type": [
        "TPU"
    ],
    "compatible_printers": [
        "Flashforge Guider4 0.6 HF nozzle"
    ],
    "hot_plate_temp": [
        "50"
    ],
    "hot_plate_temp_initial_layer": [
        "50"
    ],
    "nozzle_temperature": [
        "220"
    ],
    "nozzle_temperature_initial_layer": [
        "220"
    ],
    "nozzle_temperature_range_high": [
        "250"
    ],
    "nozzle_temperature_range_low": [
        "190"
    ],
    "overhang_fan_speed": [
        "100"
    ],
    "pressure_advance": [
        "0.03"
    ],
    "slow_down_min_speed": [
        "20"
    ],
    "support_material_interface_fan_speed": [
        "100"
    ],
    "temperature_vitrification": [
        "30"
    ],
    "textured_cool_plate_temp": [
        "45"
    ],
    "textured_cool_plate_temp_initial_layer": [
        "45"
    ],
    "textured_plate_temp": [
        "50"
    ],
    "textured_plate_temp_initial_layer": [
        "50"
    ]
}