{
    "type": "filament",
    "name": "Generic PETG @Flashforge Artemis",
    "inherits": "fdm_filament_pet",
    "from": "system",
    "setting_id": "FFFP02",
    "filament_id": "FFF03",
    "instantiation": "true",
    "filament_flow_ratio": [
        "1"
    ],
    "filament_max_volumetric_speed": [
        "12"
    ],
    "slow_down_layer_time": [
        "8"
    ],
    "temperature_vitrification": [
        "70"
    ],
    "hot_plate_temp_initial_layer": [
        "80"
    ],
    "hot_plate_temp": [
        "80"
    ],
    "close_fan_the_first_x_layers": [
        "1"
    ],
    "slow_down_min_speed": [
        "30"
    ],
    "overhang_fan_speed": [
        "80"
    ],
    "support_material_interface_fan_speed": [
        "90"
    ],
    "additional_cooling_fan_speed": [
        "50"
    ],
    "filament_start_gcode": [
        "; filament start gcode \n; right_extruder_material:PETG"
    ],
    "filament_end_gcode": [
        "; filament end gcode\n"
    ],
    "filament_diameter": [
        "1.75"
    ],
    "enable_pressure_advance": [
        "0"
    ],
    "pressure_advance": [
        "0.0"
    ],
    "filament_density": [
        "1.27"
    ],
    "nozzle_temperature_range_low": [
        "220"
    ],
    "nozzle_temperature_range_high": [
        "250"
    ],
    "nozzle_temperature_initial_layer": [
        "235"
    ],
    "nozzle_temperature": [
        "235"
    ],
    "fan_cooling_layer_time": [
        "30"
    ],
    "fan_max_speed": [
        "90"
    ],
    "fan_min_speed": [
        "40"
    ],
    "overhang_fan_threshold": [
        "25%"
    ],
    "compatible_printers": [
        "Flashforge Artemis 0.4 Nozzle"
    ]
}