{
    "type": "process",
    "name": "0.10mm High Quality @BBL P1P 0.2 nozzle",
    "inherits": "fdm_process_single_0.10_nozzle_0.2",
    "from": "system",
    "setting_id": "GP112",
    "instantiation": "true",
    "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
    "bridge_speed": [
        "50",
        "50"
    ],
    "default_acceleration": [
        "4000",
        "4000"
    ],
    "elefant_foot_compensation": "0.15",
    "enable_overhang_speed": [
        "1",
        "1"
    ],
    "enable_height_slowdown": [
        "0",
        "0"
    ],
    "gap_infill_speed": [
        "50",
        "50"
    ],
    "initial_layer_infill_speed": [
        "70",
        "70"
    ],
    "initial_layer_speed": [
        "40",
        "40"
    ],
    "initial_layer_acceleration": [
        "500",
        "500"
    ],
    "inner_wall_acceleration": [
        "0",
        "0"
    ],
    "inner_wall_speed": [
        "150",
        "150"
    ],
    "internal_solid_infill_speed": [
        "150",
        "150"
    ],
    "initial_layer_travel_acceleration": [
        "6000",
        "6000"
    ],
    "outer_wall_acceleration": [
        "2000",
        "2000"
    ],
    "outer_wall_speed": [
        "60",
        "60"
    ],
    "overhang_1_4_speed": [
        "0",
        "0"
    ],
    "overhang_2_4_speed": [
        "50",
        "50"
    ],
    "overhang_3_4_speed": [
        "30",
        "30"
    ],
    "overhang_4_4_speed": [
        "10",
        "10"
    ],
    "overhang_totally_speed": [
        "10",
        "10"
    ],
    "print_extruder_id": [
        "1",
        "1"
    ],
    "print_extruder_variant": [
        "Direct Drive Standard",
        "Direct Drive High Flow"
    ],
    "sparse_infill_pattern": "gyroid",
    "sparse_infill_speed": [
        "100",
        "100"
    ],
    "slowdown_start_height": [
        "0",
        "0"
    ],
    "slowdown_start_speed": [
        "1000",
        "1000"
    ],
    "slowdown_start_acc": [
        "100000",
        "100000"
    ],
    "slowdown_end_height": [
        "400",
        "400"
    ],
    "slowdown_end_speed": [
        "1000",
        "1000"
    ],
    "slowdown_end_acc": [
        "100000",
        "100000"
    ],
    "small_perimeter_speed": [
        "50%",
        "50%"
    ],
    "small_perimeter_threshold": [
        "0",
        "0"
    ],
    "sparse_infill_acceleration": [
        "100%",
        "100%"
    ],
    "support_speed": [
        "150",
        "150"
    ],
    "support_interface_speed": [
        "80",
        "80"
    ],
    "top_surface_speed": [
        "150",
        "150"
    ],
    "top_surface_acceleration": [
        "2000",
        "2000"
    ],
    "travel_speed": [
        "500",
        "500"
    ],
    "travel_speed_z": [
        "0",
        "0"
    ],
    "travel_acceleration": [
        "10000",
        "10000"
    ],
    "vertical_shell_speed": [
        "80%",
        "80%"
    ],
    "compatible_printers": [
        "Bambu Lab P1P 0.2 nozzle"
    ]
}