{
    "type": "filament",
    "name": "Generic TPU for AMS @BBL X1C",
    "inherits": "Generic TPU for AMS @base",
    "from": "system",
    "setting_id": "GFSU98_00",
    "instantiation": "true",
    "fan_cooling_layer_time": [
        "40"
    ],
    "fan_max_speed": [
        "50"
    ],
    "fan_min_speed": [
        "10"
    ],
    "filament_max_volumetric_speed": [
        "10.5",
        "10.5"
    ],
    "filament_retraction_length": [
        "0.8",
        "0.8"
    ],
    "filament_deretraction_speed": [
        "nil",
        "nil"
    ],
    "filament_flow_ratio": [
        "1",
        "1"
    ],
    "filament_flush_temp": [
        "0",
        "0"
    ],
    "filament_flush_volumetric_speed": [
        "0",
        "0"
    ],
    "filament_long_retractions_when_cut": [
        "nil",
        "nil"
    ],
    "filament_ramming_volumetric_speed": [
        "-1",
        "-1"
    ],
    "filament_retract_before_wipe": [
        "nil",
        "nil"
    ],
    "filament_retract_restart_extra": [
        "nil",
        "nil"
    ],
    "filament_retract_when_changing_layer": [
        "nil",
        "nil"
    ],
    "filament_retraction_distances_when_cut": [
        "nil",
        "nil"
    ],
    "filament_retraction_minimum_travel": [
        "nil",
        "nil"
    ],
    "filament_retraction_speed": [
        "nil",
        "nil"
    ],
    "filament_wipe": [
        "nil",
        "nil"
    ],
    "filament_wipe_distance": [
        "nil",
        "nil"
    ],
    "filament_z_hop": [
        "nil",
        "nil"
    ],
    "filament_z_hop_types": [
        "nil",
        "nil"
    ],
    "filament_extruder_variant": [
        "Direct Drive Standard",
        "Direct Drive High Flow"
    ],
    "filament_pre_cooling_temperature": [
        "0",
        "0"
    ],
    "filament_ramming_travel_time": [
        "0",
        "0"
    ],
    "filament_adaptive_volumetric_speed": [
        "0",
        "0"
    ],
    "long_retractions_when_ec": [
        "0",
        "0"
    ],
    "nozzle_temperature": [
        "230",
        "230"
    ],
    "nozzle_temperature_initial_layer": [
        "230",
        "230"
    ],
    "overhang_fan_threshold": [
        "25%"
    ],
    "retraction_distances_when_ec": [
        "0",
        "0"
    ],
    "slow_down_layer_time": [
        "10"
    ],
    "volumetric_speed_coefficients": [
        "0 0 0 0 0 0",
        "0 0 0 0 0 0"
    ],
    "compatible_printers": [
        "Bambu Lab X1 Carbon 0.4 nozzle",
        "Bambu Lab P1S 0.4 nozzle",
        "Bambu Lab P1S 0.6 nozzle",
        "Bambu Lab P1S 0.8 nozzle",
        "Bambu Lab X1 Carbon 0.6 nozzle",
        "Bambu Lab X1 Carbon 0.8 nozzle",
        "Bambu Lab X1E 0.4 nozzle",
        "Bambu Lab X1E 0.6 nozzle",
        "Bambu Lab X1E 0.8 nozzle"
    ]
}