{
    "type": "machine",
    "name": "Anycubic Predator 0.4 nozzle",
    "inherits": "fdm_machine_common",
    "from": "system",
    "setting_id": "GM003",
    "instantiation": "true",
    "printer_model": "Anycubic Predator",
    "default_print_profile": "0.20mm Standard @Anycubic Predator",
    "gcode_flavor": "marlin",
    "nozzle_diameter": [
        "0.4"
    ],
    "bed_exclude_area": [
        "0x0"
    ],
    "printable_area": [
        "184.296x16.1238",
        "182.189x32.1249",
        "178.696x47.8815",
        "173.843x63.2737",
        "167.667x78.1844",
        "160.215x92.5",
        "151.543x106.112",
        "141.718x118.916",
        "130.815x130.815",
        "118.916x141.718",
        "106.112x151.543",
        "92.5x160.215",
        "78.1844x167.667",
        "63.2737x173.843",
        "47.8815x178.696",
        "32.1249x182.189",
        "16.1238x184.296",
        "1.1328e-14x185",
        "-16.1238x184.296",
        "-32.1249x182.189",
        "-47.8815x178.696",
        "-63.2737x173.843",
        "-78.1844x167.667",
        "-92.5x160.215",
        "-106.112x151.543",
        "-118.916x141.718",
        "-130.815x130.815",
        "-141.718x118.916",
        "-151.543x106.112",
        "-160.215x92.5",
        "-167.667x78.1844",
        "-173.843x63.2737",
        "-178.696x47.8815",
        "-182.189x32.1249",
        "-184.296x16.1238",
        "-185x2.2656e-14",
        "-184.296x-16.1238",
        "-182.189x-32.1249",
        "-178.696x-47.8815",
        "-173.843x-63.2737",
        "-167.667x-78.1844",
        "-160.215x-92.5",
        "-151.543x-106.112",
        "-141.718x-118.916",
        "-130.815x-130.815",
        "-118.916x-141.718",
        "-106.112x-151.543",
        "-92.5x-160.215",
        "-78.1844x-167.667",
        "-63.2737x-173.843",
        "-47.8815x-178.696",
        "-32.1249x-182.189",
        "-16.1238x-184.296",
        "-3.39839e-14x-185",
        "16.1238x-184.296",
        "32.1249x-182.189",
        "47.8815x-178.696",
        "63.2737x-173.843",
        "78.1844x-167.667",
        "92.5x-160.215",
        "106.112x-151.543",
        "118.916x-141.718",
        "130.815x-130.815",
        "141.718x-118.916",
        "151.543x-106.112",
        "160.215x-92.5",
        "167.667x-78.1844",
        "173.843x-63.2737",
        "178.696x-47.8815",
        "182.189x-32.1249",
        "184.296x-16.1238",
        "185x-4.53119e-14"
    ],
    "printable_height": "455",
    "machine_end_gcode": "M107 T0\nM104 S0\nM104 S0 T1\nM140 S0\nG92 E0\nG91\nG1 E-1 F300\nG1 Z+0.5  F6000\nG28 \nG90 ;absolute positioning",
    "machine_start_gcode": "G21 ; use millimeters\nG90 ; absolute positioning\nM82 ; absolute extrusion\nM107 T0 ; turn off part cooling fan\n\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM104 S[nozzle_temperature_initial_layer] T0  ; set nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed\nM109 S[nozzle_temperature_initial_layer] T0  ; wait for nozzle\n\nG28 ; home all\nG1 X0 Y0 Z5.0 F4000 ; jump to center\nG1 X-180 Y0 Z0.4 F2000 ; move to near bed edge\nG92 E0 ; reset the extruder\n\n; --- Prime line ---\nG1 E5 F300 ; initial prime\nG0 X-180.00 Y0.00 Z0.30 E0 F1000\nG1 X-179.385 Y-14.864 Z0.30 E3.57042\nG1 X-177.545 Y-29.627 Z0.30 E7.14094\nG1 X-174.492 Y-44.187 Z0.30 E10.71134\nG1 X-170.247 Y-58.446 Z0.30 E14.28195\nG1 X-164.839 Y-72.305 Z0.30 E17.85235\nG1 X-158.305 Y-85.671 Z0.30 E21.42298\nG1 X-150.690 Y-98.451 Z0.30 E24.99339\nG1 X-142.045 Y-110.558 Z0.30 E27.56379 ; gradually reducing extrusion\nG1 F1500 E26.56379 ; retract 1mm\nG1 Z0.5 F3000 ; lift Z slightly\nG92 E0 ; reset the extruder\n; --- End priming line ---",
    "layer_change_gcode": "",
    "machine_pause_gcode": "PAUSE",
    "scan_first_layer": "0",
    "nozzle_type": "brass",
    "auxiliary_fan": "0"
}